Gutenberg · e01.org
Cover of Scientific American Supplement, No. 363, December 16, 1882
Project Gutenberg cover, or a typographic cover where none is held.

Gutenberg · ebook 8452

Scientific American Supplement, No. 363, December 16, 1882

by Various · English · public domain in the US

  • Language English
  • PG edition 2005
  • Rights public domain (US)
  • Source Project Gutenberg
0%

Contents

    PART III.

    Hoboken.--The locality represented here is where the same serpentine that we met on Staten Island crops out, and is known as Castle Hill. It is a prominent object in view when on the Hudson River, lying on Castle Point just above the Stevens Institute and about a mile north of the ferry from Barclay or Christopher Street, New York city.

    Upon it is the Stevens estate, etc., which is ordinarily inaccessible, but below this and along the river walk, commencing at Fifth Street and to Twelfth, there is an almost uninterrupted outcrop from two to thirty feet in thickness and plentifully interspersed with the veins of the minerals of the locality, which are very similar to those of Staten Island; the serpentine, however, presenting quite a different appearance, being of a denser and more homogeneous structure and color, and not so brittle or light colored as that of Staten Island, but of a pure green color.

    The veins of minerals are about a half an inch to--in the case of druses of magnesite, which penetrate the rock in all proportions and directions--even six inches in thickness. They lie generally in a perpendicular position, but are frequently bent and contorted in every direction. They are the more abundant where the rock is soft, as veins, but included minerals are more plentiful in the harder rock.

    There is hardly any one point on the outcrop that may be said to be favored in abundance, but the veins of the brucites, dolomite, and magnesites are scattered at regular and short intervals, except perhaps the last, which is most plentiful at the north end of the walk.

    Magnesite.--This mineral, of which we obtained some fine specimens on Staten Island, occurs extremely plentifully here, constituting five or six per cent. of a large proportion of the rock, and in every imaginable condition, from a smooth, even, dark colored mass apparently devoid of crystalline form, to druses of very small but beautiful crystals, which are obtained by selecting a vein with an opening say from a quarter to a half-inch between it and one or, if possible, both points of its contact with the inclosing rock, and cutting away the massive magnesite and rock around it, when fine druses and masses or geodes may be generally found and carefully cut out.

    The crystals are generally less than a quarter of an inch long, and the selection of a cabinet specimen should be based more upon their form of aggregation that the size of the crystals.

    Nearly all the veins hold more or less of these masses through their total extent, but many have been removed, and consequently a careful search over the veins for the above indications, of which there are still plenty undeveloped or but partly so, would well repay an hour or more of cutting into, by the specimens obtained. Patience is an excellent and very necessary virtue in searching for pockets of minerals, and is even more necessary here among the multitudinous barren veins.

    One hint I might add, which is of final importance, and the ignorance of which has so far preserved this old locality from exhaustion, is that every specimen of this kind in the serpentine, of any great uniqueness, is to be found within five feet from the upper or surface end of the vein, which in this locality is inaccessible in the more favored parts without a ladder or similar arrangement upon which one may work to reach them.

    Here the veins will be found to be very far disintegrated and cavernous, thus possessing the requisite conditions of occurrence (this is also true of Staten Island, but there more or less inaccessible) for this mineral and similar ones that occur in geodes or drused incrustations, while it is just vice versa for those occurring in closely packed veins, as brucite, soapstone, asbestos, etc., where they occur in finer specimens, where they are the more compact, which is deep underground.

    This is also partly true of the zeolites and granular limestone species with included minerals.

    I do not think there is any rule, at least I have not observed it in an extended mineralogical experience; but if they favor any part, it is undoubtedly the top, as in the granular limestone and granite; however, they generally fall subordinate to the first principle, as they more frequently, in this formation, with the exception of chromic iron, occur not in the serpentine but in the veins therein contained; for instance, crystals of dolomite are found deeper in the rock as they occur in the denser soapstone, which becomes so at a more or less considerable depth, with spinel, zircon, etc., of the granular limestone.

    They occur generally in pockets within five feat from the surface, but they can hardly be called included minerals, as they are rather, as their mention suggests, pockets, and adjacent or in contact with the intruded granite or metamorphosed rock joining the formation at this point.

    This is seemingly at variance when we consider datholite, but when we do find it in pockets a hundred and fifty feet below the surface, in the Weehawken tunnel, it is not in the trap, but on the surface of what was a cleft or empty vein, since filled up with chlorite extending from the surface down, while natrolite, etc., by the trap having clefts of such variable and often great depth, allowed the solution of the portion thus contributed that infiltered from the surface easy access to the beds in which they lie, the mode of access being since filled with densely packed calcite, which was present in over-abundance.

    This is not applicable to serpentine, as the clefts are never of any great depth, and the five feet before mentioned are a proportionately great depth from the surface. As I mentioned in commencing this paper (Part I), every part of the success of a trip lies in knowing where to find the minerals sought; and by close observation of these relations much more direction may be obtained than by my trying to describe the exact point in a locality where I have obtained them or seen them.

    There is much more satisfaction in finding rich pockets independently of direction, and by close observance of indications rather than chance, or by having them pointed out; for the one that reads this, and goes ahead of you to the spot, and either destroys the remainder by promiscuous cuttings, or carries them off in bulk, as there are many who go to a locality, and what they cannot carry off they destroy, give you a disappointment in finding nothing; consequently, I have considered that this digression from our subject in detail was pardonable, that one may be independent of the stated parts of the locality, and not too confidently rely on them, as I am sometimes disappointed myself in localities and pockets that I discover in spare time by finding that some one has been there between times, and carried off the remainder.

    The characteristics of magnesite I have detailed under that head under Pavilion Hill, Staten Island; but it may be well to repeat them briefly here. Form as above described, from a white to darker dirty color. Specific gravity, 2.8-3; hardness, about 3.5. Before the blowpipe it is infusible, and not reduced to quicklime, which distinguishes it from dolomite, which it frequently resembles in the latter's massive form, common here in veins.

    It dissolves in acid readily with but little effervescence, which little, however, distinguishes it from brucite, which it sometimes resembles and which has a much lower-specific gravity when pure.

    Dolomite.--This mineral has been very common in this locality.

    It differs, perhaps, as I have before explained, from magnesite in containing lime besides magnesia, and from calc spar by the vice versa. Much of the magnesite in this serpentine contains more or less lime, and is consequently in places almost pure dolomite, although crystals are seldom to be found in this outcrop, it all occurring as veins about a half-inch thick and resembling somewhat the gurhofite of Staten Island, only that it is softer and less homogeneous in appearance.

    Its color is slightly tinged green, and specimens of it are not peculiarly unique, but perhaps worth removing. Its characteristics are: first, its burning to quicklime before the blowpipe, distinguishing it from pure magnesite; second, its slow effervescence in acids.

    Besides these, its specific gravity is 2.8, hardness, 8.5; from calcspar it cannot be distinguished except by chemical analysis, as the two species blend almost completely with every intermediate stage of composition into either calc spar, or, what occurs in this locality, aragonite, similar in composition to it, or dolomite. The color of the last, however, is generally darker, and it cleaves less readily into its crystalline form, which is similar to calc spar, and of which it is harder, 3.5 to 3 of calc spar.

    Aragonite.--This mineral, identical in composition with calc spar, but whose crystalline form is entirely different, occurs in this locality in veins hardly recognizable from the magnesite or dolomite, and running into dolomite. It is not abundant, and the veins are limited in extent; the only distinguishment it has from the dolomite, practically, is its fibrous structure, the fibers being brittle and very coarse. If examined with a powerful glass, they will be seen to be made up of modified long prisms. The specific gravity is over 2.9, hardness about 4, unless much weathered, when it becomes apparently less.

    There are some small veins at the north end of the walk, and in them excellent forms may be found by cutting into the veins.

    Brucite.--This mineral occurs here in fair abundance, it being one of the principal localities for it in the United States, and where formerly extremely unique specimens were to be obtained. It has been pretty well exhausted, however, and the fine specimens are only to be obtained by digging into the veins of it in the rock, which are quite abundant on the south end of the walk, and, as I before noted, as deep as possible from the top of the veins, as it is a closely packed mineral not occurring in geodes, druses, etc.

    Two forms of it occur; the one, nemalite, is in fibers of a white to brown color resembling asbestos, but the fibers are brittle, and hardly as fine as a typical asbestos. It is packed in masses resembling the brucite, from which it only differs in breaking into fibers instead of plates, as I have explained in my description of that species (see Part II).

    They are both readily soluble in acids, with effervescence, and infusible but crumble to powder before the blowpipe, or at least become brittle; when rubbed in mass with a piece of iron, they phosphoresce with a yellow light; specific gravity, 2.4, hardness, 1.5 to 2. Its ready solubility in acids without effervescence at once distinguishes it from any mineral that it may resemble.

    The specimens of nemalite may be more readily obtained than the brucite but fine specimens of both may be obtained after finding a vein of it, by cutting away the rock, which is not hard to do, as it is in layers and masses packed together, and which maybe wedged out in large masses at a time with the cold chisel and hammer, perhaps at the rate of three or four cubic feet an hour for the first hour, and in rapidly decreasing rate as progress is made toward the unweathered rock and untouched brucite, etc.

    Serpentine.--Fair specimens of this may be obtained of a dark oil green color, but not translucent or peculiarly perfect forms. The variety known as marmolite, which splits into thin leaves, is plentiful and often well worth removing.

    Chromic Iron.--Crystals of this are included in the denser rock in great abundance; they are very small, seldom over a few lines in diameter, of an iron black color, of a regular octahedral form; sometimes large crystals may be found in place or in the disintegrated loose rock. I have seen them a half inch in diameter, and a half dozen in a small mass, thus forming an excellent cabinet specimen. By finding out by observation where they are the thickest in the rock, and cutting in at this point, more or less fine crystals may be obtained.

    This is readily found where they are so very abundant, near the equidistant points of the walk, that no difficulty should be encountered in so doing. These characteristics are interesting, and if large specimens cannot be obtained, any quantity of the small crystals may be split out, and, as a group, used for a representative at least. Before the blowpipe it is infusible, but if powdered, it slowly dissolves in the molten borax bead and yields a beautiful green globule.

    The specific gravity, which is generally unattainable, is about 4.5, and hardness 5 to 6. Its powder or small fragments are attracted by the magnet. A few small veins of this mineral are also to be found horizontally in the rock, and small masses may be obtained. They are very rare, however. I have seen numerous agates from this locality, but have not found them there myself. They may be looked for in the loose earth over the outcrop, or along the wall of the river. Our next locality is Paterson, N.

    J., or rather in a trip first to West Paterson by the D.L. & W. Railroad, Boonton branch, then back to Paterson proper, which is but a short distance, and then home by the Erie road, or, if an excursion ticket has been bought, on the D.L. & W, back from West Paterson. Garret Rock holds the minerals of Paterson, and although they are few in number, are very unique. The first is phrenite. This beautiful mineral occurs in geodes, or veins of them, near the surface of the basalt, which is the characteristic formation here, and lies on the red sandstone.

    These veins are but two or three feet from the surface, and the ones from which the fine specimens are to be and have been obtained are exposed by the railroad cutting about a thousand feet north of the station at West Paterson, and on the west side of the rails. Near or below the beds is a small pile of debris, prominent by being the only one in the vicinity near the rails.

    In this loose rock and the veins which are by this description readily found and identified, they are about three inches in thickness, and in some places widen out into pockets even a foot in diameter They look like seams of a dark earth, with blotches of white or green matter where they are weathered, but are fresher in appearance inside.

    The rock, in the immediate vicinity of the veins, is soft, and may be readily broken out with the hammer of, if possible, a pick bar, and thus some of these geode cavities broken into, and much finer specimens obtained than in the vein proper.

    Considerable occurs scattered about in the before-mentioned pile of loose rock and debris, and if one does not prize it sufficiently to cut into the rock, taking the chances of lucky find, plenty may be obtained thus; but as it has been pretty thoroughly picked over where loose, it is much more satisfactory to obtain the fine specimens in place in the rock.

    When the bed for the railroad was being cut here, many fine specimens were obtained by those in the vicinity, and the natives of the place have it in abundance, and it may be obtained from many of them for a trifle, if one is not inclined to work it out. The mineral itself occurs in masses in the vein of a white, greenish white, or more or less dark green color. Sometimes yellowish crystals of it occur plentifully in short thick prisms, but the common form is that of round coralloid bunches, having a radiated structure within.

    Sometimes it is in masses made up of a structure resembling the leaves of a book slightly opened, and in nearly every shape and size. Crystals of the various forms may be well secured, and also the different colors from the deep green to the blue white, always remembering that true, perfect crystals are of more value than masses or attempted forms. The specific gravity is 2.8 to 2.9, hardness nearly 7 before the blowpipe; it readily fuses after intumescing; it dissolves in hot acid without gelatinizing, leaving a flaky residue.

    Datholite.--This mineral is very abundant as inferior specimens, and frequently very fine ones may be obtained. They occur all around Garret Rock at the juncture of the basalt and red sandstone, in pockets, and as heavy druses. They are most abundant near the rock cuttings between West Paterson and Paterson, and may be cut out by patient labor. This is a long known and somewhat noted locality for datholite, and no difficulty need be experienced in obtaining plenty of fair specimens.

    Near them is the red sandstone, lying under the basalt, and baked to a scoriaceous cinder. Upon this is a layer of datholite in the form of a crystalline plate, and over or above this, either in the basalt or hanging down into cavities in the sandstone, are the crystals or geodes of datholite. Old spots are generally exhausted, and consequently every new comer has to hunt up new pockets, but as this is readily done, I will not expend further comment on the matter. The datholite, as in other localities, consists of groups of small colorless crystals.

    Hardness, about 5; specific gravity, 3. Before the blowpipe it intumesces and melts to a glassy globule coloring the flame green, and forms a jelly when boiled with the acids.

    Pectolite--This mineral is also quite abundant in places, the greater part occurring with or near the phrenite before mentioned, in small masses generally more or less weathered, but in very fair specimens, which are about an inch in thickness. It is readily recognized by its peculiar appearance, which, I may again repeat, is in fibrous masses, these fibers being set together in radiated forms, and are quite tough and flexible, of a white color, and readily fused to a globule before the blowpipe.

    Feldspar.--This mineral occurs strewn over the hill from place to place, and is peculiarly characterized by its lively flesh red color, quite different from the dull yellowish gray of that from Staten Island or Bergen Hill. Fine crystals of it are rather rare, but beautiful specimens of broken groups may be obtained in loose debris around the hill and in its center. I have not been able to locate the vein or veins from which it has come, but persistent search will probably reveal it, or it may be stumbled upon by accident.

    Some of the residents of the vicinity have some fine specimens, and it is possible that they can direct to a plentiful locality. However, some specimens are well worth a thorough search, and possess considerable value as mineralogieal specimens. The specific gravity of the mineral is 2.6, and it has a hardness of 6 before the blowpipe. It is with difficulty fused to a globule, more or less transparent.

    It occurs undoubtedly in veins in the basalt and near the surface of the outcrop As this locality has never before been mentioned as affording this species, it is fresh to the amateur and other mineralogists, and there need be no difficulty in obtaining some fine specimens. Its brilliant color distinguishes it from other minerals of the locality.

    It is possible that some of the other zeolites as mentioned under Bergen Hill occur here, but I have not been able to find them. The reason may be that the rock is but little cut into, and consequently no new unaltered veins are exposed.

    COPPER MINES, ARLINGTON, N. J.--A short distance north of this station, on the New York and Greenwood Lake Rai

    Edition notice Project Gutenberg source, credits & licence

    The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.

    Title
    Scientific American Supplement, No. 363, December 16, 1882
    Author
    Various
    Release date
    July 1, 2005 [eBook #8452]
    Language
    English
    Credits
    Produced by Olaf Voss, Don Kretz, Juliet Sutherland, Charles
    Most recently updated
    October 9, 2012
    Transcriber and production notes
    Produced by Olaf Voss, Don Kretz, Juliet Sutherland, Charles
    Franks and the Online Distributed Proofreaders Team
    Front matter as received (title page, contents)
    [Illustration]
    
    
    
    
    SCIENTIFIC AMERICAN SUPPLEMENT NO. 363
    
    
    
    
    NEW YORK, DECEMBER 16, 1882
    
    Scientific American Supplement. Vol. XIV, No. 363.
    
    Scientific American established 1845
    
    Scientific American Supplement, $5 a year.
    
    Scientific American and Supplement, $7 a year.
    
    
           *       *       *       *       *
    
    TABLE OF CONTENTS
    
    I.    ENGINEERING AND MECHANICS.--The New York Canals.--
          Their history, dimensions, and commercial influence
    
          Cottrau's Locomotive for Ascending Steep Grades.--1 figure
    
          Bachmann's Steam Drier--3 figures
    
          H. S. Parmelee's Patent Automatic sprinkler.--2 figures
    
          Instrument for Drawing Converging Straight Lines.--10 figures
    
          Feed Water Heater and Purifier. By GEO. S. STRONG.--2 figures
    
          Paper Making "Down East."
    
          Goulier's Tube Gauge.--1 figure.-Plan and longitudinal and
          transverse sections
    
          Soldering Without an Iron
    
          Working Copper Ores at Spenceville
    
    II.   TECHNOLOGY AND CHEMISTRY-New Method of Detecting
          Dyes on Yarns and Tissues. By JULES JOFFRE.--Reagents.--Red
          colors.--Violet colors
    
          Chevalet's Condenso-purifier for Gas.--2 figures.--Elevation and
          plan
    
          Artificial Ivory
    
          Creosote Impurities. By Prof P. W. BEDFORD
    
    III.  ELECTRICITY. ETC.--Sir William Thomson's Pile--2 figures
    
          Siemens' Telemeter.--1 figure.--Siemens electric telemeter
    
          Physics Without Apparatus.--Experiment in static electricity.--
          1 figure
    
          The Cascade Battery. By F. HIGGINS.--1 figure
    
          Perfectly Lovely Philosophy
    
    IV.   ASTRONOMY, ETC.--The Comet as seen from the Pyramids
          near Cairo, Egypt.--1 figure
    
          Sunlight and skylight at High Altitudes.--Influence of the
          atmosphere upon the solar spectrum.--Observations of Capt.
          Abney and Professor Langley.--2 figures
    
          How to Establish a True Meridian
    
    V.    MINERALOGY.--The Mineralogical Localities in and Around
          New York City, and the Minerals Occurring Therein. By NELSON
          H. DAKTON. Part III.--Hoboken minerals.--Magnesite.--Dolomite.
          --Brucite.--Aragonite.--Serpentine.--Chromic iron--Datholite.
          --Pectolite.--Feldspar.--Copper mines, Arlington, N.J.-Green
          malachite.--Red oxide of copper.--Copper glance.--Erubescite
    
    VI.   ENTOMOLOGY.--The Buckeye Leaf Stem Borer
    
          Defoliation of Oak Trees by _Dryocampa senatoria_ in Perry
          County, Pa.
    
          Efficacy of Chalcid Egg Parasites
    
          On the Biology of _Gonatopis Pilosus_, Thoms
    
          Species of Otiorhynchadae Injurious to Cultivated Plants
    
    VII.  ART, ARCHITECTURE, ETC.--Monteverde's Statue of Architecture.
          --Full page illustration, _Lit Architectura_.
          By JULI MONTEVERDE
    
          Design for a Gardener's Cottage.--1 figure
    
    VIII. HYGIENE AND MEDICINE.--Remedy for Sick Headache
    
    IX.   ORNITHOLOGY.--Sparrows in the United States.--Effects of
          acclimation, etc.
    
    X.    MISCELLANEOUS.--James Prescott Joule, with Portrait.--A
          sketch of the life and investigations of the discoverer of the
          mechanical equivalent of heat. By J. T. BOTTOMLEY
    
          The Proposed Dutch International Colonial and General Export
          Exhibition.--1 figure.--Plan of the Amsterdam Exhibition
    
           *       *       *       *       *
    
    
    
    
    THE COMET FROM THE PYRAMIDS, CAIRO
    
    
    Some centuries ago, the appearance of so large a comet as is now
    interesting the astronomical world, almost contemporaneously with our
    victory in Egypt, would have been looked upon as an omen of great
    portent, and it is a curious coincidence that the first glimpse Sir
    Garnet Wolseley had of this erratic luminary was when standing, on
    the eventful morning of September 13, 1882, watch in hand, before the
    intrenchments of Tel-el-Kebir, waiting to give the word to advance.
    As may be seen in our sketch, the comet is seen in Egypt in all its
    magnificence, and the sight in the early morning from the pyramids (our
    sketch was taken at 4 A.M.) is described as unusually grand.--_London
    Graphic_.
    
    [Illustration: THE COMET AS SEEN FROM THE GREAT PYRAMIDS, NEAR CAIRO,
    EGYPT.]
    
           *       *       *       *       *
    
    
    [NATURE.]
    
    
    
    
    JAMES PRESCOTT JOULE.
    
    
    James Prescott Joule was born at Salford, on Christmas Eve of the year
    1818. His father and his grandfather before him were brewers, and the
    business, in due course, descended to Mr. Joule and his elder brother,
    and by them was carried on with success till it was sold, in 1854.
    Mr. Joule's grandfather came from Elton, in Derbyshire, settled near
    Manchester, where he founded the business, and died at the age of
    fifty-four, in 1799. His father, one of a numerous family, married a
    daughter of John Prescott of Wigan. They had five children, of
    whom James Prescott Joule was the second, and of whom three were
    sons--Benjamin, the eldest, James, and John--and two daughters--Alice
    and Mary. Mr. Joule's mother died in 1836 at the age of forty-eight; and
    his father, who was an invalid for many years before his death, died at
    the age of seventy-four, in the year 1858.
    
    Young Joule was a delicate child, and was not sent to school. His early
    education was commenced by his mother's half sister, and was carried
    on at his father's house, Broomhill, Pendlebury, by tutors till he was
    about fifteen years of age. At fifteen he commenced working in the
    brewery, which, as his father's health declined, fell entirely into the
    hands of his brother Benjamin and himself.
    
    Mr. Joule obtained his first instruction in physical science from
    Dalton, to whom his father sent the two brothers to learn chemistry.
    Dalton, one of the most distinguished chemists of any age or country,
    was then President of the Manchester Literary and Philosophical Society,
    and lived and received pupils in the rooms of the Society's house. Many
    of his most important memoirs were communicated to the Society, whose
    _Transactions_ are likewise enriched by a large number of communications
    from his distinguished pupil. Dalton's instruction to the two young men
    commenced with arithmetic, algebra, and geometry. He then taught them
    natural philosophy out of Cavallo's text-book, and afterward, but only
    for a short time before his health gave way, in 1837, chemistry from his
    own "New System of Chemical Philosophy." "Profound, patient, intuitive,"
    his teaching must have had great influence on his pupils. We find Mr.
    Joule early at work on the molecular constitution of gases, following in
    the footsteps of his illustrious master, whose own investigations on the
    constitution of mixed gases, and on the behavior of vapors and gases
    under heat, were among the most important of his day, and whose
    brilliant discovery of the atomic theory revolutionized the science of
    chemistry and placed him at the head of the philosophical chemists of
    Europe.
    
    [Illustration: JAMES PRESCOTT JOULE.]
    
    Under Dalton, Mr. Joule first became acquainted with physical apparatus;
    and the interest excited in his mind very soon began to produce fruit.
    Almost immediately he commenced experimenting on his own account.
    Obtaining a room in his father's house for the purpose, he began by
    constructing a cylinder electric machine in a very primitive way. A
    glass tube served for the cylinder; a poker hung up by silk threads, as
    in the very oldest forms of electric machine, was the prime conductor;
    and for a Leyden jar he went back to the old historical jar of Cunaeus,
    and used a bottle half filled with water, standing in an outer vessel,
    which contained water also.
    
    Enlarging his stock of apparatus, chiefly by the work of his own hands,
    he soon entered the ranks as an investigator, and original papers
    followed each other in quick succession. The Royal Society list now
    contains, the titles of ninety-seven papers due to Joule, exclusive of
    over twenty very important papers detailing researches undertaken by him
    conjointly with Thomson, with Lyon Playfair, and with Scoresby.
    
    Mr. Joule's first investigations were in the field of magnetism. In
    1838, at the age of nineteen, he constructed an electro-magnetic engine,
    which he described in Sturgeon's "Annals of Electricity" for January
    of that year. In the same year, and in the three years following, he
    constructed other electro-magnetic machines and electro-magnets of novel
    forms; and experimenting with the new apparatus, he obtained results
    of great importance in the theory of electro-magnetism. In 1840 he
    discovered and determined the value of the limit to the magnetization
    communicable to soft iron by the electric current; showing for the case
    of an electro-magnet supporting weight, that when the exciting current
    is made stronger and stronger, the sustaining power tends to a certain
    definite limit, which, according to his estimate, amounts to about
    140 lb. per square inch of either of the attracting surfaces.
    He investigated the relative values of solid iron cores for the
    electro-magnetic machine, as compared with bundles of iron wire; and,
    applying the principles which he had discovered, he proceeded to the
    construction of electro-magnets of much greater lifting power than any
    previously made, while he studied also the methods of modifying the
    distribution of the force in the magnetic field.
    
    In commencing these investigations he was met at the very outset, as he
    tells us, with "the difficulty, if not impossibility, of understanding
    experiments and comparing them with one another, which arises in general
    from incomplete descriptions of apparatus, and from the arbitrary and
    vague numbers which are used to characterize electric currents. Such a
    practice," he says, "might be tolerated in the infancy of science; but
    in its present state of advancement greater precision and propriety are
    imperatively demanded. I have therefore determined," he continues,
    "for my own part to abandon my old quantity numbers, and to express my
    results on the basis of a unit which shall be at once scientific and
    convenient."
    
    The discovery by Faraday of the law of electro-chemical equivalents
    had induced him to propose the voltameter as a measurer of electric
    currents, but the system proposed had not been used in the researches
    of any electrician, not excepting those of Faraday himself. Joule,
    realizing for the first time the importance of having a system of
    electric measurement which would make experimental results obtained
    at different times and under various circumstances comparable among
    themselves, and perceiving at the same time the advantages of a system
    of electric measurement dependent on, or at any rate comparable with,
    the chemical action producing the electric current, adopted as unit
    quantity of electricity the quantity required to decompose nine grains
    of water, 9 being the atomic weight of water, according to the chemical
    nomenclature then in use.
    
    He had already made and described very important improvements in the
    construction of galvanometers, and he graduated his tangent galvanometer
    to correspond with the system of electric measurement he had adopted.
    The electric currents used in his experiments were thenceforth measured
    on the new system; and the numbers given in Joule's papers from 1840
    downward are easily reducible to the modern absolute system of electric
    measurements, in the construction and general introduction of which
    he himself took so prominent a part. It was in 1840, also, that after
    experimenting on improvements in voltaic apparatus, he turned his
    attention to "the heat evolved by metallic conductors of electricity and
    in the cells of a battery during electrolysis." In this paper, and those
    following it in 1841 and 1842, he laid the foundation of a new province
    in physical science-electric and chemical thermodynamics-then totally
    unknown, but now wonderfully familiar, even to the roughest common sense
    practical electrician. With regard to the heat evolved by a metallic
    conductor carrying an electric current, he established what was already
    supposed to be the law, namely, that "the quantity of heat evolved by
    it [in a given time] is always proportional to the resistance which it
    presents, whatever may be the length, thickness, shape, or kind of the
    metallic conductor," while he obtained the law, then unknown, that
    the heat evolved is proportional to the _square_ of the quantity of
    electricity passing in a given time. Corresponding laws were established
    for the heat evolved by the current passing in the electrolytic cell,
    and likewise for the heat developed in the cells of the battery itself.
    
    In the year 1840 he was already speculating on the transformation of
    chemical energy into heat. In the paper last referred to and in a short
    abstract in the _Proceedings of the Royal Society_, December, 1840, he
    points out that the heat generated in a wire conveying a current of
    electricity is a part of the heat of chemical combination of the
    materials used in the voltaic cell, and that the remainder, not the
    whole heat of combination, is evolved within the cell in which the
    chemical action takes place. In papers given in 1841 and 1842, he pushes
    his investigations further, and shows that the sum of the heat produced
    in all parts of the circuit during voltaic action is proportional to the
    chemical action that goes on in the voltaic pile, and again, that the
    quantities of heat which are evolved by the combustion of equivalents
    of bodies are proportional to the intensities of their affinities for
    oxygen. Having proceeded thus far, he carried on the same train of
    reasoning and experiment till he was able to announce in January, 1843,
    that the magneto-electric machine enables us to _convert mechanical
    power into heat_. Most of his spare time in the early part of the year
    1843 was devoted to making experiments necessary for the discovery of
    the laws of the development of heat by magneto-electricity, and for the
    definite determination of the mechanical value of heat.
    
    At the meeting of the British Association at Cork, on August 21, 1843,
    he read his paper "On the Calorific Effects of Magneto-Electricity,
    and on the Mechanical Value of Heat." The paper gives an account of an
    admirable series of experiments, proving that _heat is generated_ (not
    merely _transferred_ from some source) by the magneto-electric machine.
    The investigation was pushed on for the purpose of finding whether a
    _constant ratio exists between the heat generated and the mechanical
    power_ used in its production. As the result of one set of
    magneto-electric experiments, he finds 838 foot pounds to be the
    mechanical equivalent of the quantity of heat capable of increasing the
    temperature of one pound of water by one degree of Fahrenheit's scale.
    The paper is dated Broomhill, July, 1843, but a postscript, dated
    August, 1843, contains the following sentences:
    
    "We shall be obliged to admit that Count Rumford was right in
    attributing the heat evolved by boring cannon to friction, and not (in
    any considerable degree) to any change in the capacity of the metal. I
    have lately proved experimentally that _heat is evolved by the passage
    of water through narrow tubes_. My apparatus consisted of a piston
    perforated by a number of small holes, working in a cylindrical glass
    jar containing about 7 lb. of water. I thus obtained one degree of heat
    per pound of water from a mechanical force capable of raising about 770
    lb. to the height of one foot, a result which will be allowed to be very
    strongly confirmatory of our previous deductions. I shall lose no time
    in repeating and extending these experiments, being satisfied that the
    grand agents of nature are, by the Creator's fiat, _indestructible_, and
    that wherever mechanical force is expended, an exact equivalent of heat
    is _always_ obtained."
    
    This was the first determination of the dynamical equivalent of heat.
    Other naturalists and experimenters about the same time were attempting
    to compare the quantity of heat produced under certain circumstances
    with the quantity of work expended in producing it; and results and
    deductions (some of them very remarkable) were given by Séguin (1839),
    Mayer (1842), Colding (1843), founded partly on experiment, and partly
    on a kind of metaphysical reasoning. It was Joule, however, who first
    definitely proposed the problem of determining the relation between heat
    produced and work done in any mechanical action, and solved the problem
    directly.
    
    It is not to be supposed that Joule's discovery and the results of his
    investigation met with immediate attention or with ready acquiescence.
    The problem occupied him almost continuously for many years; and in 1878
    he gives in the _Philosophical Transactions_ the results of a fresh
    determination, according to which the quantity of work required to be
    expended in order to raise the temperature of one pound of water weighed
    in vacuum from 60° to 61° Fahr., is 772.55 foot pounds of work at the
    sea level and in the latitude of Greenwich. His results of 1849 and 1878
    agree in a striking manner with those obtained by Hirn and with those
    derived from an elaborate series of experiments carried out by Prof.
    Rowland, at the expense of the Government of the United States.
    
    His experiments subsequent to 1843 on the dynamical equivalent of
    heat must be mentioned briefly. In that year his father removed from
    Pendlebury to Oak Field, Whalley Range, on the south side of Manchester,
    and built for his son a convenient laboratory near to the house. It was
    at this time that he felt the pressing need of accurate thermometers;
    and while Regnault was doing the same thing in France, Mr. Joule
    produced, with the assistance of Mr. Dancer, instrument maker, of
    Manchester, the first English thermometers possessing such accuracy
    as the mercury-in-glass thermometer is capable of. Some of them were
    forwarded to Prof. Graham and to Prof. Lyon Playfair; and the production
    of these instruments was in itself a most important contribution to
    scientific equipment.
    
    As the direct experiment of friction of a fluid is dependent on no
    hypothesis, and appears to be wholly unexceptionable, it was used by Mr.
    Joule repeatedly in modified forms. The stirring of mercury, of oil,
    and of water with a paddle, which was turned by a falling weight,
    was compared, and solid friction, the friction of iron on iron under
    mercury, was tried; but the simple stirring of water seemed preferable
    to any, and was employed in all his later determinations.
    
    In 1847 Mr. Joule was married to Amelia, daughter of Mr. John Grimes,
    Comptroller of Customs, Liverpool. His wife died early (1854), leaving
    him one son and one daughter.
    
    The meeting of the British Association at Oxford, in this year, proved
    an interesting and important one. Here Joule read a fresh paper "On the
    Mechanical Equivalent of Heat." Of this meeting Sir William Thomson
    writes as follows to the author of this notice:
    
    "I made Joule's acquaintance at the Oxford meeting, and it quickly
    ripened into a lifelong friendship.
    
    "I heard his paper read in the section, and felt strongly impelled at
    first to rise and say that it must be wrong, because the true mechanical
    value of heat given, suppose in warm water, must, for small differences
    of temperature, be proportional to the square of its quantity. I knew
    from Carnot that this _must_ be true (and it _is_ true; only now I call
    it 'motivity,' to avoid clashing with Joule's 'mechanical value'). But
    as I listened on and on, I saw that (though Carnot had vitally important
    truth, not to be abandoned) Joule had certainly a great truth and a
    great discovery, and a most important measurement to bring forward. So,
    instead of rising, with my objection, to the meeting, I waited till it
    was over, and said my say to Joule himself, at the end of the meeting.
    This made my first introduction to him. After that I had a long talk
    over the whole matter at one of the _conversaziones_ of the Association,
    and we became fast friends from thenceforward. However, he did not tell
    me he was to be married in a week or so; but about a fortnight later I
    was walking down from Chamounix to commence the tour of Mont Blanc, and
    whom should I meet walking up but Joule, with a long thermometer in his
    hand, and a carriage with a lady in it not far off. He told me he had
    been married since we had parted at Oxford! and he was going to try for
    elevation of temperature in waterfalls. We trysted to meet a few days
    later at Martigny, and look at the Cascade de Sallanches, to see if it
    might answer. We found it too much broken into spray. His young wife, as
    long as she lived, took complete interest in his scientific work, and
    both she and he showed me the greatest kindness during my visits to them
    in Manchester for our experiments on the thermal effects of fluid in
    motion, which we commenced a few years later"
    
    "Joule's paper at the Oxford meeting made a great sensation. Faraday was
    there and was much struck with it, but did not enter fully into the new
    views. It was many years after that before any of the scientific chiefs
    began to give their adhesion. It was not long after, when Stokes told me
    he was inclined to be a Joulite."
    
    "Miller, or Graham, or both, were for years quite incredulous as to
    Joule's results, because they all depended on fractions of a degree of
    temperature--sometimes very small fractions. His boldness in making such
    large conclusions from such very small observational effects is almost
    as noteworthy and admirable as his skill in extorting accuracy from
    them. I remember distinctly at the Royal Society, I think it was either
    Graham or Miller, saying simply he did not believe Joule, because he had
    nothing but hundredths of a degree to prove his case by."
    
    The friendship formed between Joule and Thomson in 1847 grew rapidly.
    A voluminous correspondence was kept up between them, and several
    important researches were undertaken by the two friends in common. Their
    first joint research was on the thermal effects experienced by air
    rushing through small apertures The results of this investigation give
    for the first time an experimental basis for the hypothesis assumed
    without proof by Mayer as the foundation for an estimate of the
    numerical relation between quantities of heat and mechanical work, and
    they show that for permanent gases the hypothesis is very approximately
    true. Subsequently, Joule and Thomson undertook more comprehensive
    investigations on the thermal effects of fluids in motion, and on the
    heat acquired by bodies moving rapidly through the air. They found the
    heat generated by a body moving at one mile per second through the air
    sufficient to account for its ignition. The phenomena of "shooting
    stars" were explained by Mr. Joule in 1847 by the heat developed by
    bodies rushing into our atmosphere.
    
    It is impossible within the limits to which this sketch is necessarily
    confined to speak in detail of the many researches undertaken by Mr.
    Joule on various physical subjects. Even of the most interesting of
    these a very brief notice must suffice for the present.
    
    Molecular physics, as I have already remarked, early claimed his
    attention. Various papers on electrolysis of liquids, and on the
    constitution of gases, have been the result. A very interesting paper
    on "Heat and the Constitution of Elastic Fluids" was read before
    the Manchester Literary and Philosophical Society in 1848. In it he
    developed Daniel Bernoulli's explanation of air pressure by the impact
    of the molecules of the gas on the sides of the vessel which contains
    it, and from very simple considerations he calculated the average
    velocity of the particles requisite to produce ordinary atmospheric
    pressure at different temperatures. The average velocity of the
    particles of hydrogen at 32° F. he found to be 6,055 feet per second,
    the velocities at various temperatures being proportional to the square
    roots of the numbers which express those temperatures on the absolute
    thermodynamic scale.
    
    His contribution to the theory of the velocity of sound in air was
    likewise of great importance, and is distinguished alike for the
    acuteness of his explanations of the existing causes of error in the
    work of previous experimenters, and for the accuracy, so far as
    was required for the purpose in hand, of his own experiments. His
    determination of the specific heat of air, pressure constant, and the
    specific heat of air, volume constant, furnished the data necessary for
    making Laplace's theoretical velocity agree with the velocity of sound
    experimentally determined. On the other hand, he was able to account
    for most puzzling discrepancies, which appeared in attempted direct
    determinations of the differences between the two specific heats by
    careful experimenters. He pointed out that in experiments in which air
    was allowed to rush violently or _explode_ into a vacuum, there was a
    source of loss of energy that no one had taken account of, namely,
    in the sound produced by the explosion. Hence in the most careful
    experiments, where the vacuum was made as perfect as possible, and the
    explosion correspondingly the more violent, the results were actually
    the worst. With his explanations, the theory of the subject was rendered
    quite complete.
    
    Space fails, or I should mention in detail Mr. Joule's experiments on
    magnetism and electro-magnets, referred to at the commencement of this
    sketch. He discovered the now celebrated change of dimensions produced
    by the magnetization of soft iron by the current. The peculiar noise
    which accompanies the magnetization of an iron bar by the current,
    sometimes called the "magnetic tick," was thus explained.
    
    Mr. Joule's improvements in galvanometers have already been incidentally
    mentioned, and the construction by him of accurate thermometers has been
    referred to. It should never be forgotten that _he first_ used small
    enough needles in tangent galvanometers to practically annul error from
    want of uniformity of the magnetic field. Of other improvements and
    additions to philosophical instruments may be mentioned a thermometer,
    unaffected by radiation, for measuring the temperature of the
    atmosphere, an improved barometer, a mercurial vacuum pump, one of the
    very first of the species which is now doing such valuable work, not
    only in scientific laboratories, but in the manufacture of incandescent
    electric lamps, and an apparatus for determining the earth's horizontal
    magnetic force in absolute measure.
    
    Here this imperfect sketch must close. My limits are already passed. Mr.
    Joule has never been in any sense a public man; and, of those who know
    his name as that of the discoverer who has given the experimental basis
    for the grandest generalization in the whole of physical science, very
    few have ever seen his face. Of his private character this is scarcely
    the place to speak. Mr. Joule is still among us. May he long be spared
    to work for that cause to which he has given his life with heart-whole
    devotion that has never been excelled.
    
    In June, 1878, he received a letter from the Earl of Beaconsfield
    announcing to him that Her Majesty the Queen had been pleased to grant
    him a pension of £200 per annum. This recognition of his labors by his
    country was a subject of much gratification to Mr. Joule.
    
    Mr. Joule received the Gold Royal Medal of the Royal Society in 1852,
    the Copley Gold Medal of the Royal Society in 1870, and the Albert Medal
    of the Society of Arts from the hand of the Prince of Wales in 1880.
    
    J. T. BOTTOMLEY.
    
           *       *       *       *       *
    
    
    
    
    THE NEW YORK CANALS.
    
    
    The recent adoption of the constitutional amendment abolishing tolls on
    the canals of New York State has revived interest in these water ways.
    The overwhelming majority by which the measure was passed shows, says
    the _Glassware Reporter_, that the people are willing to bear the cost
    of their management by defraying from the public treasury all expenses
    incident to their operation. That the abolition of the toll system will
    be a great gain to the State seems to be admitted by nearly everybody,
    and the measure met with but little opposition except from the railroad
    corporations and their supporters.
    
    At as early a date as the close of the Revolutionary War, Mr. Morris had
    suggested the union of the great lakes with the Hudson River, and in
    1812 he again advocated it. De Witt Clinton, of New York, one of the
    most, valuable men of his day, took up the idea, and brought the leading
    men of his State to lend him their support in pushing it. To dig a
    canal all the way from Albany to Lake Erie was a pretty formidable
    undertaking; the State of New York accordingly invited the Federal
    government to assist in the enterprise.
    
    The canal was as desirable on national grounds as on any other, but the
    proposition met with a rebuff, and the Empire State then resolved to
    build the canal herself. Surveyors were sent out to locate a line for
    it, and on July 4, 1817, ground was broken for the canal by De Witt
    Clinton, who was then Governor of the State.
    
    The main line, from Albany, on the Hudson, to Buffalo, on Lake Erie,
    measures 363 miles in length, and cost $7,143,789. The Champlain,
    Oswego, Chemung, Cayuga, and Crooked Lake canals, and some others, join
    the main line, and, including these branch lines, it measures 543 miles
    in length, and cost upward of $11,500,000. This canal was originally 40
    feet in breadth at the water line, 28 feet at the bottom, and 4 feet in
    depth. Its dimensions proved too small for the extensive trade which it
    had to support, and the depth of water was increased to 7 feet, and the
    extreme breadth of the canal to 60 feet. There are 84 locks on the main
    line. These locks, originally 90 feet in length and 15 in breadth, and
    with an average lift of 8 feet 2 inches, have since been much enlarged.
    The total rise and fall is 692 feet. The towpath is elevated 4 feet
    above the level of the water, and is 10 feet in breadth. At Lockport the
    canal descends 60 feet by means of 5 locks excavated in solid rock, and
    afterward proceeds on a uniform level for a distance of 63 miles to the
    Genesee River, over which it is carried on an aqueduct having 9 arches
    of 50 feet span each. Eight and a half miles from this point it passes
    over the Cayuga marsh, on an embankment 2 miles in length, and in some
    places 70 feet in height. At Syracuse, the "long level" commences, which
    extends for a distance of 69½ miles to Frankfort, without an intervening
    lock. After leaving Frankfort, the canal crosses the river Mohawk, first
    by an aqueduct 748 feet in length, supported on 16 piers, elevated 25
    feet above the surface of the river, and afterward by another aqueduct
    1,188 feet in length, and emerges into the Hudson at Albany.
    
    This great work was finished in 1825, and its completion was the
    occasion of great public rejoicing. The same year that the Erie Canal
    was begun, ground was broken for a canal from Lake Champlain to the
    Hudson, sixty-three miles in length. This work was completed in 1823.
    
    The construction of these two water ways was attended with the most
    interesting consequences. Even before they were completed their value
    had become clearly apparent. Boats were placed upon the Erie Canal as
    fast as the different levels were ready for use, and set to work in
    active transportation. They were small affairs compared with those of
    the present day, being about 50 or 60 tons burden, the modern canal boat
    being 180 or 200 tons. Small as they were, they reduced the cost of
    transportation immediately to one-tenth what it had been before. A ton
    of freight by land from Buffalo to Albany cost at that time $100. When
    the canal was open its entire length, the cost of freight fell from
    fifteen to twenty-five dollars a ton, according to the class of article
    carried; and the time of transit from 20 to 8 days, Wheat at that time
    was worth only $33 a ton in western New York, and it did not pay to send
    it by land to New York. When sent to market at all, it was floated down
    the Susquehanna to Baltimore, as being the cheapest and best market.
    The canal changed that. It now became possible to send to market a wide
    variety of agricultural produce--fruit, grain, vegetables, etc.--which,
    before the canal was built, either had no value at all, or which could
    be disposed of to no good advantage. It is claimed by the original
    promoters of the Erie Canal, who lived to see its beneficial effects
    experienced by the people of the country, that their work, costing less
    than $8.000,000 and paying its whole cost of construction in a very
    few years, added $100,000,000 to the value of the farms of New York by
    opening up good and ready markets for their products. The canal had
    another result. It made New York city the commercial metropolis of the
    country. An old letter, written by a resident of Newport, R. I., in that
    age, has lately been discovered, which speaks of New York city, and
    says: "If we do not look out, New York will get ahead of us." Newport
    was then one of the principal seaports of the country; it had once been
    the first. New York city certainly did "get ahead of us" after the Erie
    Canal was built. It got ahead of every other commercial city on the
    coast. Freight, which had previously gone overland from Ohio and the
    West to Pittsburg, and thence to Philadelphia, costing $120 a ton
    between the two cities named, now went to New York by way of the Hudson
    River and the Erie Canal and the lakes. Manufactures and groceries
    returned to the West by the same route, and New York became a
    flourishing and growing emporium immediately. The Erie Canal was
    enlarged in 1835, so as to permit the passage of boats of 100 tons
    burden, and the result was a still further reduction of the cost of
    freighting, expansion of traffic, and an increase of the general
    benefits conferred by the canal. The Champlain Canal had an effect upon
    the farms and towns lying along Lake Champlain, in Vermont and New York,
    kindred in character to that above described in respect to the Erie
    Canal. It brought into the market lands and produce which before had
    been worthless, and was a great blessing to all concerned.
    
    There can be no doubt that the building of the Erie Canal was the wisest
    and most far-seeing enterprise of the age. It has left a permanent and
    indelible mark upon the face of the republic of the United States in the
    great communities it has directly assisted to build up at the West, and
    in the populous metropolis it created at the mouth of the Hudson River.
    None of the canals which have been built to compete with it have yet
    succeeded in regaining for their States what was lost to them when the
    Erie Canal went into operation. This water route is still the most
    important artificial one of its class in the country, and is only
    equaled by the Welland Canal in Canada, which is its closest rival. Now
    that it is free, it will retain its position as the most popular water
    route to the sea from the great West. The Mississippi River will divert
    from it all the trade flowing to South America and Mexico; but for the
    northwest it will be the chief water highway to the ocean.
    
           *       *       *       *       *
    
    
    
    
    COTTRAU'S LOCOMOTIVE FOR ASCENDING STEEP GRADES.
    
    
    We borrow, from our contemporary _La Nature_, the annexed figure,
    illustrating an ingenious type of locomotive designed for equally
    efficient use on both level surfaces and heavy grades.
    
    [Illustration: COTTRAU'S LOCOMOTIVE FOR ASCENDING STEEP GRADES.]
    
    As well known, all the engines employed on level roads are provided with
    large driving wheels, which, although they have a comparatively feeble
    tractive power, afford a high speed, while, on the contrary, those that
    are used for ascending heavy grades have small wheels that move slowly,
    but possess, as an offset, a tractive power that enables them to
    overcome the resistances of gravity.
    
    M. Cottrau's engine possesses the qualities of both these types, since
    it is provided with wheels of large and small diameter, that may be used
    at will. These two sets of wheels, as may be seen from the figure, are
    arranged on the same driving axle. The large wheels are held apart
    the width of the ordinary track, while the small wheels are placed
    internally, or as in the case represented in the figure, externally.
    These two sets of wheels, being fixed solidly to the same axle, revolve
    together.
    
    On level surfaces the engine rests on the large wheels, which revolve
    in contact with the rails of the ordinary track, and it then runs with
    great speed, while the auxiliary wheels revolve to no purpose. On
    reaching an ascent, on the contrary, the engine meets with an elevated
    track external or internal to the ordinary one, and which engages with
    the auxiliary wheels. The large wheels are then lifted off the ordinary
    track and revolve to no purpose. In both cases, the engine is placed
    under conditions as advantageous as are those that are built especially
    for the two types of roads. The idea appears to be a very ingenious one,
    and can certainly be carried out without disturbing the working of the
    locomotive. In fact, the same number of piston strokes per minute may
    be preserved in the two modes of running, so as to reduce the speed in
    ascending, in proportion to the diameters of the wheels. There will thus
    occur the same consumption of steam. On another hand, there is nothing
    to prevent the boiler from keeping up the same production of steam, for
    it has been ascertained by experience, on the majority of railways, that
    the speed of running has no influence on vaporization, and that the same
    figures may be allowed for passenger as for freight locomotives.
    
    The difficulties in the way of construction that will be met with in the
    engine under consideration will be connected with the placing of the
    double wheels, which will reduce the already limited space at one's
    disposal, and with the necessity that there will be of strengthening all
    the parts of the mechanism that are to be submitted to strain.
    
    The installation of the auxiliary track will also prove a peculiarly
    delicate matter; and, to prevent accidents, some means will have to be
    devised that will permit the auxiliary wheels to engage with this
    track very gradually. Still, these difficulties are perhaps not
    insurmountable, and if M. Cottrau's ingenious arrangement meets with
    final success in practice, it will find numerous applications.
    
           *       *       *       *       *
    
    
    
    
    BACHMANN'S STEAM DRIER.
    
    
    The apparatus shown in the annexed cuts is capable of effecting a
    certain amount of saving in the fuel of a generator, and of securing a
    normal operation in a steam engine. If occasion does not occur to blow
    off the motive cylinder frequently, the water that is carried over
    mechanically by the steam, or that is produced through condensation in
    the pipes, accumulates therein and leaks through the joints of the cocks
    and valves. This is one of the causes that diminish the performance of
    the motor.
    
    [Illustration: BACHMANN'S STEAM DRIER. FIG. 1.]
    
    The steam drier under consideration has been devised by Mr. Bachmann
    for the purpose of doing away with such inconveniences. When applied to
    apparatus employed in heating, for cooking, for work in a vacuum, it may
    be affixed to the pipe at the very place where the steam is utilized, so
    as to draw off all the water from the mixture.
    
    As shown by the arrows in Fig 1, the steam enters through the orifice,
    D, along with the water that it carries, gives up the latter at P, and
    is completely dried at the exit, R. The partition, g, is so arranged
    as to diminish the section of the steam pipe, in order to increase the
    effect of the gravity that brings about the separation of the mixture.
    The water that falls into the space, P, is exhausted either by means of
    a discharge cock (Fig. 1), which gives passage to the liquid only, or
    by the aid of an automatic purge-cock (Figs. 2 and 3), the locating of
    which varies with the system employed. This arrangement is preferable
    to the other, since it permits of expelling the water deposited in the
    receptacle, P, without necessitating any attention on the part of the
    engine-man.
    
           *       *       *       *       *
    
    
    
    
    H.S. PARMELEE'S PATENT AUTOMATIC SPRINKLER.
    
    
    The inventor says: "The automatic sprinkler is a device for
    automatically extinguishing fires through the release of water by means
    of the heat of the fire, the water escaping in a shower, which is thrown
    in all directions to a distance of from six to eight feet. The sprinkler
    is a light brass rose, about 1½ inches diameter and less than two inches
    high entire, the distributer being a revolving head fitted loosely to
    the body of the fixed portion, which is made to screw into a half inch
    tube connection. The revolution of the distributer is effected by the
    resistance the water meets in escaping through slots cut at an angle
    in the head. The distribution of water has been found to be the most
    perfect from this arrangement. Now, this distributing head is covered
    over with a brass cap, which is soldered to the base beneath with an
    alloy which melts at from 155 to 160 degrees. No water can escape until
    the cap is removed. The heat of an insignificant fire is sufficient to
    effect this, and we have the practical prevention of any serious damage
    or loss through the multiplication of the sprinkler.
    
    [Illustration: PARMELEE'S PATENT AUTOMATIC SPRINKLER. FIG. 1.--Section
    of Sprinkler with Cap on.]
    
    The annexed engravings represent the sprinkler at exact size for
    one-half inch connection. Fig. 1 shows a section with the cap covering
    over the sprinkler, and soldered on to the base. Fig. 2 shows the
    sprinkler with the cap off, which, of course, leaves the water free to
    run from the holes in fine spray in all directions. Fig. 1 shows the
    base hollowed out so as to allow the heat to circulate in between the
    pipe and the base of the sprinkler, thus allowing the heat to operate on
    the _inside_ as well as on the outside of the sprinkler; thus, in case
    of fire, it is very quickly heated through sufficiently to melt the
    fusible solder. These sprinklers are all tested at 500 lb., consequently
    they can never leak, and cannot possibly be opened, except by heat,
    by any one. As the entire sprinkler is covered by a heavy brass cap,
    soldered on, it cannot by any means be injured, nor can the openings in
    the revolving head ever become filled with dust.
    
    [Illustration: PARMELEE'S PATENT AUTOMATIC SPRINKLER. FIG.2--Sprinkler
    with cap off.]
    
    It is so simple as to be easily understood by any one. As soon as the
    sprinkler becomes heated to 155 degrees, the cap will become unsoldered,
    and will then immediately be blown entirely off by the force of the
    water in the pipes and sprinkler. These caps cannot remain on after
    the fusible metal melts, if there is the least force of water. A man's
    breath is sufficient to blow them off.
    
    The arrangement commences with one or more main supply pipes, either fed
    from a city water pipe or from a tank, as the situation will admit.
    If desired, the tank need only be of sufficient size to feed a few
    sprinklers for a short time, and then dependence must be placed upon
    a pump for a further supply of water, if necessary. The tank, however
    small, will insure the automatic and prompt working of the sprinklers
    and alarm, and by the time the tank shall become empty the pumps can
    be got at work. It is most desirable, however, in all cases to have an
    abundant water supply without resorting to pumps, if it is possible.
    
    In the main supply pipe or pipes is placed our patent alarm valve,
    which, as soon as there is any motion of the water in the pipe, opens,
    and moves a lever, which, by connecting with a steam whistle valve by
    means of a wire, will blow the whistle and will continue to do so until
    either the steam or the water is stopped. Tins constitutes the alarm,
    and is positive in its motion. No water can possibly flow from the line
    of pipes without opening this valve and blowing the whistle. We also put
    in an automatic alarm bell when desired.
    
    From the main pipe other pipes are run, generally lengthways of the
    building, ten feet from each side and twenty feet apart. At every ten
    feet on these pipes we place five feet of three-quarter inch pipe,
    reaching each side, at the end of which is placed the sprinkler in an
    elbow pointing toward the ceiling. This arrangement is as we place them
    in all cotton and woolen mills, but may be varied to suit different
    styles of buildings.
    
    The sprinkler is made of brass, and has a revolving head, with four
    slots, from which the water flies in a very fine and dense spray on
    everything, and filling the air very completely for a radius of seven or
    eight feet all around; thus rendering the existence of any fire in that
    space perfectly impossible; and as the sprinklers are only placed ten
    feet apart, and a fire cannot start at a greater distance than from five
    to six feet from one or more of them, it is assured that all parts of a
    building are fully protected.
    
    Over each one of these sprinklers is placed a brass cap, which fits
    closely over and passes below the base, where it is soldered on with a
    fusible metal that melts as soon as it is heated to 155 degrees.
    
    As soon as a fire starts in any part of a building, heat will be
    generated and immediately rise toward the ceiling, and the sprinkler
    nearest the fire will become heated in a very few moments to the
    required 155 degrees, when the cap will become loosened and will be
    forced off by the power of the water. The water will then be spread in
    fine spray on the ceiling over the fire, also directly on the fire and
    all around for a diameter of from fourteen to eighteen feet. This spray
    has been fully tried, and it is found to be entirely sufficient to
    extinguish any fire within its reach which can be made of any ordinary
    materials.
    
    As soon as the cap on any sprinkler becomes loosened by the heat of a
    fire and is forced off, a current of water is produced in the main pipe
    where the alarm valve is placed, and as the passage through it is dosed,
    the water cannot pass without opening the valve and thus moving the
    lever to which the steam whistle valve is attached; by this motion the
    whistle valve is opened, and the whistle will blow until it is stopped
    by some one."
    
           *       *       *       *       *
    
    
    
    
    INSTRUMENT FOR DRAWING CONVERGING STRAIGHT LINES.
    
    [Footnote: Paper by Prof. Fr. Smigaglia, read at the reunion of the
    Engineers and Architects of Rome.]
    
    
    1. LET A and B be two fixed points and A C and C B two straight lines
    converging at C and moving in their plane so as to always remain based
    on this point (Fig. 1). The geometrical place of the positions occupied
    by C is the circumference of the circle which passes through the three
    points A, B, and C. Now let C F be a straight line passing through C. On
    prolonging it, it will meet the circumference A C B I at a point I. If
    the system of three converging--lines takes a new position A C' F B,
    it is evident F' B' prolonged will pass through I, because the angles
    [alpha] and [beta] are invariable for any position whatever of the
    system.
    
    [Illustration: Fig. 1.]
    
    2. In the particular case in which [alpha] = [beta] (Fig. 2), the point
    I is found at the extremity of the diameter, and, consequently, for a
    given distance A B, or for a given length C D, such point will be at its
    maximum distance from C.
    
    [Illustration: Fig. 2.]
    
    3. This granted, it is easy to construct an instrument suitable for
    drawing converging lines which shall prove useful to all those who have
    to do with practical perspective. For this purpose it is only necessary
    to take three rulers united at C (Fig. 3), to rest the two A C and C B
    against two points or needles A and B, and to draw the lines with the
    ruler C F, in placing the system (§ 1) in all positions possible. The
    three rulers may be inclined in any way whatever toward each other, but
    (§ 2) it is preferable to take the case where [alpha] = [beta].
    
    [Illustration: Fig. 3.]
    
    4. Let us suppose that the instrument passes from the position I to
    position III (Fig. 4). Then the ruler C A will come to occupy the
    position B A, from the fact that the instrument, continuing to move in
    the same direction, will roll around the point B. It is well, then, to
    manage so that the system shall have another point of support. For that
    reason I prolong C B, take B C' = B C, draw C' I, and describe the
    circumference--the geometrical place of the points C'. I take C' D = C'
    B and obtain at D the position of the fixed point at which the needle
    is inserted. In Fig. 4 are represented different positions of the
    instrument; and it may be seen that all the points C C', and the centers
    O O', are found upon the circumferences that have their center at I.
    
    [Illustration: Fig. 4.]
    
    5. The manipulation and use of the instrument are of the simplest
    character. Being given any two straight converging lines whatever,
    [alpha] [beta] and [gamma] [delta] (Fig. 5), in order to trace all the
    others I insert a needle at A and arrange the instrument as seen at S. I
    draw A B and A B', and from there carry it to S' in such a way that the
    ruler being on [gamma] [delta], one of the resting rulers passes through
    A. I draw the line C B which meets A B at the point B, the position
    sought for the second needle. In order to draw the straight lines which
    are under [alpha] [beta], it is only necessary to hold the needle A in
    place and to fix one at B', making A B' = A B. In this case S" indicates
    one of the positions of the instrument.
    
    [Illustration: Fig. 5.]
    
    6. The point A was chosen arbitrarily, but it is evident that that of
    the needles depends on its distance from the point of convergence. Thus,
    on taking A' instead of A in the case of Fig. 3, they approach, while
    the contrary happens on choosing the point A". It is clear that the
    different positions that a needle A may take are found on a straight
    line which runs to the point of meeting.
    
    7. If the instrument were jointed or hinged at C, that is to say, so
    that we could at will modify the angle of the resting ruler, we might
    make the position of the needles depend on such angle, and conversely.
    
    8. Being given the length C I (Fig. 6), to establish the position of the
    needles so that all the lines outside of the sheet shall converge at I.
    To do this, it is well to determine C D, and then to draw the straight
    line A D B perpendicular to C I, so as to have at A and B the points at
    which the needles must be placed.
    
    [Illustration: Fig. 6.]
    
    Then
    
                           ___      ___
                ___        AD²      CD²
      CD x DI = AD². CD = ---- = --------- tang²[alpha],
                           DI     CI - CD
    
    [TEX: CD \times DI = \overline{AD^2}.\ CD = \frac{\overline{AD^2}}{DI} =
    \frac{\overline{CD^2}}{CI-CD} \tan^2 \alpha]
    
    whence
    
                   CI
      CD = ------------------ or CD = CI cos²[alpha].    (1)
            I + tang²[alpha]
    
    [TEX: CD = \frac{CI}{I + \tan^2 \alpha}\ \text{or}\ CD = CI \cos^2
    \alpha.]
    
    9. If the instrument is jointed, the absolute values being
    
                _____________
               /
      AD = \  /  CD(CI - CD) ,   (2)
            \/
    
    [TEX: AD = \sqrt{CD(CI - CD)}]
    
    it suffices to take for CD a suitable value and to calculate AD.
    
    If, for example, the value of C D is represented by C D', the instrument
    takes the position A' C B', and the needles will be inserted at A' and
    B' on the line A' D' B', which is perpendicular to C I.
    
    10. If the position of the instrument, and consequently that of the
    needles, has been established, and we wish to know the distance C I, we
    will have
    
               CD
      CI = ------------ ;    (3)
           cos²[alpha]
    
    [TEX: CI = \frac{CD}{\cos^2 \alpha}]
    
    or, again,
    
             ___
             AC²
      CI =  -----            (4)
             CD'
    
    [TEX: CI = \frac{\overline{AC^2}}{CD'}]
    
    11. In order to avoid all calculation, we may proceed thus: If I wish to
    arrange the instrument so that C I represents a given quantity (§ 8),
    I take (Fig. 7) the length Ci = CI/n, where n is any entire number
    whatever.
    
    [Illustration: Fig. 7.]
    
    In other terms, Ci is the reduction to the scale of CI.
    
    I describe the circumference C b i a, and arrange the instrument as seen
    in the figure, and measure the length C b.
    
    It is visible that
    
      C i     1     C b     C d
     ----- = --- = ----- = ------; then C B = n.C b   (5)
      C I     n     C B     C D
    
      CD = n.C d;   (6)
    
    and, consequently, the position of the needles which are found at A and
    B are determined.
    
    12. The question treated in § 10, then, is simply solved. In fact, on
    describing the circumference C b i a with any radius whatever, I shall
    have
    
           C B
      n = -----;      (7)
           c b
    
    and, consequently,
    
      C I = n.C i     (8)
    
    13. As may be seen, the instrument composed of three firmly united
    rulers is the simplest of all and easy to use. Any one can construct it
    for himself with a piece of cardboard, and give the angle 2 [alpha] the
    value that he thinks most suitable for each application. The greater
    2 [alpha] is, the shorter is the distance at which we should put the
    needles for a given point of meeting.
    
    14 The jointed instrument may be constructed as shown in Figs 8, 9, and
    10. The three pieces, A. B, and C, united by a pivot, O, in which there
    is a small hole, are of brass or other metal. Rulers may be easily
    procured of any length whatever. The instrument is Y-shaped. In the
    particular case in which [alpha] = 180° it becomes T-shaped, and serves
    to draw parallel lines.
    
    [Illustration: Fig. 8, Fig. 9, Fig. 10]
    
    15. The instrument may be used likewise, as we have seen, to draw arcs
    of circles of the diameter C I or of the radius A O = r, whose center o
    falls outside the paper. The pencil will be rested on C. We may operate
    as follows (Fig. 2): Being given the direction of the radii A O and B
    O, or, what amounts to the same thing, the tangents to the curve at the
    given points, A and B to be united, we draw the line A D and raise at
    its center the perpendicular D C, which, prolonged, passes necessarily
    through the center. It is necessary to calculate the length C D.
    
    We shall have
    
                     ___ ___           ___
      CD (2r - CD) = AD².CD² - 2r.CD + AD² = o.
    
    [TEX: CD (2r - CD) = \overline{AD^2}.\overline{CD^2} - 2r.CD +
    \overline{AD^2} = o.]
    
                    _________
                   /     ___
      CD = r ± \  / r² - AD²  .
                \/
    
    [TEX: CD = r ± \sqrt{r^2 - \overline{AD^2}}.]
    
    It is evident that the lower sign alone suits our case, for d < r;
    consequently,
    
                    _________
                   /     ___
      CD = r - \  / r² - AD²  .   (9)
                \/
    
    [TEX: CD = r - \sqrt{r^2 - \overline{AD^2}}.]
    
    Having obtained C, we put the instrument in the direction A B C. Then
    each point of C F describes a circumference of the same center o.
    
    16. If the distance of the points A and B were too great, then it
    would be easy to determine a series of points belonging to the arc of
    circumference sought (Fig. 4).
    
    Being given C, the direction C I, and C I = R, on C I I lay off C E = d,
    draw A E B perpendicularly, and calculate C A or A E. I shall have
    
                    ___
      d = (R - d) = AE²;
    
    [TEX: d = (R - d) = \overline{AE^2};]
    
    or, as absolute value,
    
                 __________
                /
      A E = \  / d (R - d) .    (10)
             \/
    
    [TEX: AE = \sqrt{d (R-d)}]
    
    The instrument being arranged according to A C B, I prolong C B and take
    B C' = B C, when C' will be one of the points sought. It will be readily
    understood how, by repeating the above operations, but by varying the
    value of d, we obtain the other intermediate points, and how we may
    continue the operation to the right of C' with the process pointed out.
    
    17. If the three rulers were three arcs of a large circle of a sphere,
    the instrument might serve for drawing the meridians on such sphere.
    
    18. If we imagine, instead of three axes placed in one plane and
    converging at one point, a system of four axes also converging in one
    point, but situated in any manner whatever in space, and if we rest
    three of them against three fixed points, we shall be able to solve in
    space problems analogous to those that have just been solved in a plane.
    If we had, for example, to draw a spherical vault whose center was
    inaccessible, we might adopt the same method.--_Le Génie Civil_.
    
           *       *       *       *       *
    
    
    
    
    FEED-WATER HEATER AND PURIFIER.
    
    [Footnote: A paper read before the Franklin Institute.]
    
    By GEORGE S. STRONG.
    
    
    In order to properly understand the requirements of an effective
    feed-water purifier, it will be necessary to understand something of the
    character of the impurities of natural waters used for feeding
    boilers, and of the manner in which they become troublesome in causing
    incrustation or scale, as it is commonly called, in steam boilers. All
    natural waters are known to contain more or less mineral matter, partly
    held in solution and partly in mechanical suspension. These mineral
    impurities are derived by contact of the water with the earth's surface,
    and by percolation through its soil and rocks. The substances taken
    up in solution by this process consist chiefly of the carbonates
    and sulphates of lime and magnesia, and the chloride of sodium. The
    materials carried in mechanical suspension are clay, sand, and vegetable
    matter. There are many other saline ingredients in various natural
    waters, but they exist in such minute quantities, and are generally so
    very soluble, that their presence may safely be ignored in treating of
    the utility of boiler waters.
    
    Of the above named salts, the carbonates of lime and magnesia are
    soluble only when the water contains free carbonic acid.
    
    Our American rivers contain from 2 to 6 grains of saline matter to the
    gallon in solution, and a varying quantity--generally exceeding 10
    grains to the gallon--in mechanical suspension. The waters of wells and
    springs hold a smaller quantity in suspension, but generally carry a
    larger percentage of dissolved salts in solution, varying from 10 to 650
    grains to the gallon.
    
    When waters containing the carbonates of lime and magnesia in solution
    are boiled, the carbonic acid is driven off, and the salts, deprived of
    their solvent, are rapidly precipitated in fine crystalline particles,
    which adhere tenaciously to whatever surface they fall upon. With
    respect to the sulphate of lime, the case is different. It is at best
    only sparingly soluble in water, one part (by weight) of the salt
    requiring nearly 500 parts of water to dissolve it. As the water
    evaporates in the boiler, however, a point is soon reached where
    supersaturation occurs, as the water freshly fed into it constantly
    brings fresh accessions of the salt; and when this point is reached,
    the sulphate of lime is precipitated in the same form and with the same
    tenaciously adherent quality as the carbonates. There is, however,
    a peculiar property possessed by this salt which facilitates its
    precipitation, namely, that its solubility in water diminishes as the
    temperature rises. This fact is of special interest, since, if properly
    taken advantage of, it is possible to effect its almost complete removal
    from the feed-water of boilers,
    
    There is little difference in the solubility of the sulphate of lime
    until the temperature has risen somewhat above 212° Fahr., when it
    rapidly diminishes, and finally, at nearly 300°, all of this salt,
    held in solution at lower temperatures, will be precipitated when the
    temperature has risen to that point. The following table[1] represents
    the solubility of sulphate of lime in sea water at different
    temperatures:
    
      Temperature.                 Percentage Sulph.
       Fahr.                      Lime held in Solution.
        217°                              0.500
        219°                              0.477
        221°                              0.432
        227°                              0.395
        232°                              0.355
        236°                              0.310
        240°                              0.267
        245°                              0.226
        250°                              0.183
        255°                              0.140
        261°                              0.097
        266°                              0.060
        271°                              0.023
        290°                              0.000
    
    [Footnote 1: _Vide_ Burgh, "Modern Marine Engineering," page 176 _et
    seq._ M. Cousté, _Annales des Mines_ V 69. _Recherches sur Vincrustation
    des Chaudières a vapour_. Mr. Hugh Lee Pattison, of Newcastle-on-Tyne,
    at the meeting of the Institute of Mechanical Engineers of Great
    Britain, in August, 1880, remarked on this subject that "The solubility
    of sulphate of lime in water diminishes as the temperature rises. At
    ordinary temperatures pure water dissolves about 150 grains of sulphate
    of lime per gallon; but at a temperature of 250° Fahr., at which the
    pressure of steam is equal to about 2 atmospheres, only about 40 grains
    per gallon are held in solution. At a pressure of 3 atmospheres, and
    temperature of 302° Fahr., it is practically insoluble. The point
    of maximum solubility is about 95° Fahr. The presence of magnesium
    chloride, or of calcium chloride, in water, diminishes its power of
    dissolving sulphate of lime, while the presence of sodium chloride
    increases that power. As an instance of the latter fact, we find a
    boiler works much cleaner which is fed alternately with fresh water and
    with brackish water pumped from the Tyne when the tide is high than one
    which is fed with fresh water constantly."]
    
    These figures hold substantially for fresh as well as for sea water, for
    the sulphate of lime becomes wholly insoluble in sea water, or in soft
    water, at temperatures comprised between 280° and 300° Fahr.
    
    It appears from this that it is simply necessary to heat water up to a
    temperature of 250° in order to effect the precipitation of four fifths
    of the sulphate of lime it may have contained, or to the temperature of
    290° in order to precipitate it entirely. The bearing of these facts on
    the purification of feed-waters will appear further on. The explanation
    offered to account for the gradually increasing insolubility of sulphate
    of lime on heating, is, that the hydrate, in which condition it exists
    in solution, is partially decomposed, anhydrous calcic sulphate
    being formed, the dehydration becoming more and more complete as the
    temperature rises. Sulphate of magnesia, chloride of sodium (common
    salt), and all the other more soluble salts contained in natural waters
    are likewise precipitated by the process of supersaturation, but owing
    to their extreme solubility their precipitation will never be effected
    in boilers; all mechanically suspended matter tends naturally to
    subside.
    
    Where water containing such mineral and suspended matter is fed to a
    steam boiler, there results a combined deposit, of which the carbonate
    of lime usually forms the greater part, and which remains more or less
    firmly adherent to the inner surfaces of the boiler, undisturbed by the
    force of the boiling currents. Gradually accumulating, it becomes harder
    and thicker, and, if permitted to accumulate, may at length attain such
    thickness as to prevent the proper heating of the water by any fire that
    may be maintained in the furnace. Dr. Joseph G. Rogers, who has made
    boiler waters and incrustations a subject of careful study, declares
    that the high heats necessary to heat water through thick scale will
    sometimes actually convert the scale into a species of glass, by
    combining the sand, mechanically separated, with the alkaline salts. The
    same authority has carefully estimated the non-conducting properties
    of such boiler incrustations. On this point he remarks that the evil
    effects of the scale are due to the fact that it is relatively a
    nonconductor of heat. As compared with iron, its conducting power is
    as 1 to 37½, consequently more fuel is required to heat water in an
    incrusted boiler than in the same boiler if clean. Rogers estimates that
    a scale 1-16th of an inch thick will require the extra expenditure of
    15 per cent. more fuel, and this ratio increases as the scale grows
    thicker. Thus, when it is one-quarter of an inch thick, 60 per cent.
    more fuel is needed; one-half inch, 112 per cent. more fuel, and so on.
    
    Rogers very forcibly shows the evil consequences to the boiler from the
    excessive heating required to raise steam in a badly incrusted boiler,
    by the following illustration: To raise steam to a pressure of 90 pounds
    the water must be heated to about 320° Fahr. In a clean boiler of
    one-quarter inch iron this may be done by heating the external surface
    of the shell to about 325° Fahr. If, now, one-half an inch of scale
    intervenes between the boiler shell and the water, such is its quality
    of resisting the passage of heat that it will be necessary to heat the
    fire surface to about 700°, almost to a low red heat, to effect the same
    result. Now, the higher the temperature at which iron is kept the more
    rapidly it oxidizes, and at any heat above 600° it very soon becomes
    granular and brittle, and is liable to bulge, crack, or otherwise give
    way to the internal pressure. This condition predisposes the boiler to
    explosion and makes expensive repairs necessary. The presence of such
    scale, also, renders more difficult the raising, maintaining, and
    lowering of steam.
    
    The nature of incrustation and the evils resulting therefrom having been
    stated, it now remains to consider the methods that have been devised
    to overcome them. These methods naturally resolve themselves into
    two kinds, chemical and mechanical. The chemical method has two
    modifications; in one the design is to purify the water in large tanks
    or reservoirs, by the addition of certain substances which shall
    precipitate all the scale-forming ingredients before the water is fed
    into the boiler; in the other the chemical agent is fed into the boiler
    from time to time, and the object is to effect the precipitation of the
    saline matter in such a manner that it will not form solid masses of
    adherent scale. Where chemical methods of purification are resorted to,
    the latter plan is generally followed as being the least troublesome. Of
    the many substances used for this purpose, however, some are measurably
    successful; the majority of them are unsatisfactory or objectionable.
    
    The mechanical methods are also very various. Picking, scraping,
    cleaning, etc., are very generally resorted to, but the scale is so
    tenacious that this only partially succeeds, and, as it necessitates
    stoppage of work, it is wasteful. In addition to this plan, a great
    variety of mechanical contrivances for heating and purifying the
    feed-water, by separating and intercepting the saline matter on its
    passage through the apparatus, have been devised. Many of these are of
    great utility and have come into very general use. In the Western States
    especially, where the water in most localities is heavily charged
    with lime, these mechanical purifiers have become quite indispensable
    wherever steam users are alive to the necessity of generating steam with
    economy.
    
    Most of these appliances, however, only partly fulfill their intended
    purposes. They consist essentially of a chamber through which the
    feed-water is passed, and in which it is heated almost to the boiling
    point by exhaust steam from the engine. According to the temperature
    to which the water is heated in this chamber, and the length of time
    required for its passage through the chamber, the carbonates are more or
    less completely precipitated, as likewise the matter held in mechanical
    suspension. The precipitated matter subsides on shelves or elsewhere in
    the chamber, from which it is removed from time to time. The sulphate
    of lime, however, and the other soluble salts, and in some cases also a
    portion of the carbonates that were not precipitated during the brief
    time of passage through the heater, are passed on into the boiler.
    
    Appreciating this insufficiency of existing feed-water purifiers to
    effectually remove these dangerous saline impurities, the writer in
    designing the feed-water heater now to be described paid special
    attention to the separation of all matters, soluble and insoluble; and
    he has succeeded in passing the water to the boilers quite free from any
    substance which would cause scaling or coherent deposit. His attention
    was called more particularly to the necessity of extreme care in this
    respect, through the great annoyance suffered by steam users in the
    Central and Western States, where the water is heavily charged with
    lime. Very simple and even primitive boilers are here used; the most
    necessary consideration being handiness in cleaning, and not the highest
    evaporative efficiency. These boilers are therefore very wasteful, only
    evaporating, when covered with lime scale, from two to three pounds of
    water with one pound of the best coal, and requiring cleansing once
    a week at the very least. The writer's interest being aroused, he
    determined, if possible, to remedy these inconveniences, and accordingly
    he made a careful study of the subject, and examined all the heaters
    then in the market. He found them all, without exception, insufficient
    to free the feed-water from the most dangerous of impurities, namely,
    the sulphate and the carbonate of lime.
    
    Taking the foregoing facts, well known to chemists and engineers, as the
    basis of his operations, the writer perceived that all substances likely
    to give trouble by deposition would be precipitated at a temperature of
    about 250° F.
    
    His plan was, therefore, to make a feed-water heater in which the water
    could be raised to that temperature before entering the boiler. Now, by
    using the heat from the exhaust steam the water may be raised to between
    208° and 212° F. It has yet to be raised to 250° F.; and for this
    purpose the writer saw at once the advantage that would be attained by
    using a coil of live steam from the boiler. This device does not cause
    any loss of steam, except the small loss due to radiation, since the
    water in any case would have to be heated up to the temperature of the
    steam on entering the boiler. By adopting this method, the chemical
    precipitation, which would otherwise occur in the boiler, takes place
    in the heater; and it is only necessary now to provide a filter, which
    shall prevent anything passing that can possibly cause scale.
    
    Having explained as briefly as possible the principles on which the
    system is founded, the writer will now describe the details of the
    heater itself.
    
    In Figs. 1 and 2 are shown an elevation and a vertical section of
    the heater. The cast-iron base, A, is divided into two parts by the
    diaphragm, B. The exhaust steam enters at C, passes up the larger tubes,
    D, which are fastened into the upper shell of the casting, returns by
    the smaller tubes, E, which are inside the others, and passes away by
    the passage, F. The inner tube only serves for discharge. It will be
    seen at once that this arrangement, while securing great heating surface
    in a small space, at the same time leaves freedom for expansion and
    contraction, without producing strains. The free area for passage of
    steam is arranged to be one and a half times that of the exhaust pipe,
    so that there is no possible danger of back pressure. The wrought iron
    shell, G, connecting the stand, A, with the dome, H, is made strong
    enough to withstand the full boiler pressure. An ordinary casing, J,
    of wood or other material prevents loss by radiation of heat. The
    cold water from the pump passes into the heater through the injector
    arrangement, K, and coming in contact with the tubes, D, is heated; it
    then rises to the coil, L, which is supplied with steam from the boiler,
    and thus becomes further heated, attaining there a temperature of from
    250° to 270° F., according to the pressure in the boiler. This high
    temperature causes the separation of the dissolved salts; and on the way
    to the boiler the water passes through the filter, M, becoming thereby
    freed from all precipitated matter before passing away to the boiler at
    N. The purpose of the injector, K, and the pipe passing from O to K, is
    to cause a continual passage of air or steam from the upper part of the
    dome to the lower part of the heater, so that any precipitate carried up
    in froth may be again returned to the under side of the filter, in order
    more effectually to separate it, before any chance occurs of its passing
    into the boiler.
    
    [Illustration: FIG. 1.--Elevation. FIG. 2.--Vertical Section]
    
    The filter consists of wood charcoal in the lower half and bone black
    above firmly held between two perforated plates, as shown. After the
    heater has been in use for from three to ten hours, according to the
    nature of the water used, it is necessary to blow out the heater, in
    order to clear the filter from deposit. To do this, the cock at R is
    opened, and the water is discharged by the pressure from the boiler. The
    steam is allowed to pass through the heater for some little time, in
    order to clear the filter completely. After this operation, all is ready
    to commence work again. By this means the filter remains fit for use for
    months without change of the charcoal.
    
    Where a jet condenser is used, either of two plans may be adopted. One
    plan takes the feed-water from the hot well and passes the exhaust from
    the feed pumps through the heater, using at the same time an increased
    amount of coil for the live steam. By this means a temperature of water
    is attained high enough to cause deposition, and at the same time to
    produce decomposition of the oil brought over from the cylinders. The
    other plan places the heater in the line of exhaust from the engine to
    the condenser, also using a larger amount of coil. Both these methods
    work well. The writer sometimes uses the steam from the coil to work the
    feed pump; or, if the heater stands high enough, it is only necessary
    to make a connection with the boiler, when the water formed by the
    condensation of the steam runs back to the boiler, and thus the coil is
    kept constantly at the necessary temperature.
    
    In adapting the heater to locomotives, we were met with the difficulty
    of want of space to put a heater sufficiently large to handle the
    extremely large amount of water evaporated on a locomotive worked up to
    its full capacity, being from 1,500 to 2,500 gallons per hour, or from
    five hundred to one thousand h.p. We designed various forms of heaters
    and tried them, but have finally decided on the one shown in the
    engraving, Fig. 3, which consists of a lap welded tube, 13 inches
    internal diameter, 12 feet long, with a cast-iron head which is divided
    into two compartments or chambers by a diaphragm. Into this head are
    screwed 60 tubes, one inch outside diameter and 12 feet long, which
    are of seamless brass. These are the heating tubes, within which
    are internal tubes for circulation only, which are screwed into the
    diaphragm and extend to within a very short distance of the end of the
    heating tube. The exhaust steam for heating is taken equally from both
    sides of the locomotive by tapping a two-inch nipple with a cup shaped
    extension on it in such a way as to catch a portion of the exhaust
    without interfering with the free escape of the steam for the blast, and
    without any back pressure, as it relieves the back pressure as much as
    it condenses. The pipe from one side of the engine is connected with
    the chamber into which the heating tubes are screwed, and is in direct
    communication with them. The pipe from the other side is connected with
    the chamber into which the circulating tubes are screwed. The beat of
    the exhaust, working, as it does, on the quarters, causes a constant
    sawing or backward and forward circulation of steam without any
    discharge, and only the condensation is carried off.
    
    The water is brought from the pump and discharged into the lower side of
    the heater well forward, and passes around the heating tubes to the end,
    when it is discharged into a pipe that carries it forward, either direct
    to the check or into the purifier, which is located between the frames
    under the boiler, and consists of a chamber in which are arranged a live
    steam coil and a filter above the coil. The water coming in contact
    with the coil, its temperature is increased from the temperature of the
    exhaust, 210°, to about 250° Fahr., which causes the separation of the
    lime salts as before described, and it then passes through the filter
    and direct to the boiler from above the filter, which is cleansed by
    blowing back through it as before described.
    
    One of these heaters lately tested showed a saving in coal of 22 per
    cent, and an increase of evaporation of 1.09 pounds of water per pound
    of coal.--_Franklin Journal_.
    
           *       *       *       *       *
    
    
    
    
    MONTEVERDE'S STATUE OF ARCHITECTURE.
    
    
    This precious statue forms the noble figure that adorns the monument
    erected to the memory of the architect Carles Sada, who died in 1873.
    This remarkable funereal monument is 20 feet high, the superior portion
    consisting of a sarcophagus resting upon a level base. Upon this
    sarcophagus is placed the statue of "La Architectura," which we
    reproduce, and which well exemplifies the genius of the author and
    sculptor, Juli Monteverde.--_La Ilustració Catalana_.
    
    [Illustration: LA ARCHITECTURA.--STATUE BY JULI MONTEVERDE.
    
    ERECTED IN MEMORY OF THE ARCHITECT, CARLES SADA.]
    
           *       *       *       *       *
    
    
    
    
    DESIGN FOR A GARDENER'S COTTAGE.
    
    
    The illustration shows a gardener's cottage recently erected at Downes,
    Devonshire, the seat of Colonel Buller, V.C., C.B, C.M.G., from the
    designs of Mr. Harbottle, A.R.I.B.A., of Exeter. It is built of red
    brick and tile, the color of which and the outline of the cottage give
    it a picturesque appearance, seen through the beautiful old trees in one
    of the finest parks in Devonshire.--_The Architect_.
    
    [Illustration: Gardener's Cottage at DOWNES for Colonel Buller V.C.,
    C.B., C.M.G., _E.H. Harbottle Architect_]
    
           *       *       *       *       *
    
    
    
    
    PAPER MAKING "DOWN EAST."
    
    
    Writing from Gilbertville, a Lewiston journal correspondent says:
    Gilbertville, a manufacturing community in the town of Canton,
    twenty-five miles from Lewiston, up the Androscoggin, is now a village
    of over 500 inhabitants, where three years ago there was but a single
    farmhouse. If a town had sprung into existence in a far Western
    State with so much celerity, the phenomenon would not be considered
    remarkable, perhaps; but growths of this kind are not indigenous to the
    New England of the present era. Gilbertville has probably outstripped
    all New England villages in the race of the past three years. It is only
    one of the signs that old Maine is not dead yet.
    
    Gilbert Brothers erected a saw mill here three years ago. A year later,
    the Denison Paper Manufacturing Company, of Mechanic Falls, erected a
    big pulp mill, which, also, the town voted to exempt from taxation for
    ten years. The mills are valuable companions for each other. The pulp
    mill utilizes all the waste of the saw mill. A settlement was speedily
    built by the operatives. Gilbertville now boasts of a post-office, a
    store, several large boarding houses, a nice school house, and over 500
    inhabitants. The pulp mill employs seventy men. It runs night and day.
    It manufactures monthly 350 cords of poplar and spruce into pulp. It
    consumes monthly 500 cords of wood for fuel, 45 casks of soda ash,
    valued at $45 per cask, nine car loads of lime, 24,000 pounds to the
    car. It produces 1,000,000 pounds of wet fiber, valued at about $17,000,
    monthly. The pay roll amounts to $3,500 per month.
    
    The larger part of the stock used by the mill consists of poplar logs
    floated down the Androscoggin and its tributaries. One thousand two
    hundred cords of poplar cut in four-foot lengths are piled about the
    mill; and a little further up the river are 5,000 cords more. The logs
    are hauled from the river and sawed into lengths by a donkey engine,
    which cuts about sixty cords per day, and pulls out fourteen logs at
    a time. All the spruce slabs made by the saw mill are used with this
    poplar. The wood is fed to a wheel armed with many sharp knives. It
    devours a cord of wood every fifteen minutes. The four-foot sticks are
    chewed into fine chips as rapidly as they can be thrust into the maw of
    the chopper. They are carried directly from this machine to the top of
    the mill by an endless belt with pockets attached. There are hatchways
    in the attic floor, which open upon rotary iron boilers. Into these
    boilers the chips are raked, and a solution of lime and soda ash is
    poured over them.
    
    This bath destroys all the resinous matter in the wood, and after
    cooking five hours the chips are reduced to a mass of soft black pulp.
    Each rotary will contain two cords of chips. After the cooking, the pulp
    is dumped into iron tanks in the basement, where it is thoroughly washed
    with streams of clean cold water. It is then pumped into a machine which
    rolls it into broad sheets. These sheets are folded, and condensed by
    a hydraulic press of 200 tons pressure. This process reduces its bulk
    fifty per cent., and sends profuse jets of water flying out of it. The
    soda ash, in which, mixed with lime and water, the chips are cooked, is
    reclaimed, and used over and over again. The liquor, after it has been
    used, is pumped into tanks on top of large brick furnaces. As it is
    heated, it thickens. It is brought nearer and nearer the fire until it
    crystallizes, and finally burns into an ash. Eighty per cent. of the ash
    used is thus reclaimed. This process is an immense saving to the pulp
    manufacturers. The work in the pulp mill is severe, and is slightly
    tinged with danger.
    
    Three thousand four hundred pounds of white ash to 2,100 pounds of lime
    are the proportions in which the liquor in each vat is mixed. One does
    not envy the lot of the stout fellows who crawl into the great rotaries
    to stow away the chips. The hurry of business is so great that they
    cannot wait for these boilers to cool naturally, after they have cooked
    one batch, before putting in another. So they have a fan pump, to which
    is attached a canvas hose, and with this blow cooling air currents into
    the boiler, or "rotary," as they call it. The rotary is subjected to an
    immense pressure, and is very stoutly made of thick iron plates, bolted
    together.
    
    Describing the business as carried on at Mechanic Falls, the same paper
    says: There are six of these mills on the three dams over which the
    Little Androscoggin falls. These are the Eagle, the Star, the Diamond,
    the Union, the pulp, and the super calendering mills. The Eagle and the
    Star mills run on book papers of various grades. The Union mill runs on
    newspaper. The old Diamond mill now prepares pulp stock. The pulp mill
    does nothing but bleach the rag pulp and prepare for the machines in the
    other mills; while the super-calendering mill gives the paper an extra
    finish when ordered. There is practically but one series of processes by
    which the paper is made in the various mills.
    
    It is a curious fact that America is not ragged enough to produce the
    requisite amount of stock for its own paper mills. Nearly all the rags
    used by the Denison Mills (and by others in various parts of the country
    as well) are imported from the old countries. All the rags first go
    through the "duster." This is a big cylindrical shell of coarse wire
    netting. It is rapidly revolved, while a screw running through its
    center is turned in the opposite direction. Air currents are forced
    through it by a power fan. The rags are continuously fed into one end of
    this shell, which is about ten feet long and four feet in diameter. The
    screw forces them through the whole length of the shell, while they are
    kept buzzing around and subjected to breezes which blow thick clouds of
    dirt and dust out of them. The air of the room is thick with European
    and Asiatic earth. It is swept up in great rolls on the floor. The man
    who operates the duster should have leather lungs.
    
    Overhead is a long room where thirty girls are busily sorting the rags
    for the various grades of papers. That the dusting machine is no more
    perfect than a human machine is evinced by the murky atmosphere of this
    room, by the particles that lodge in the throat of the visitor, and
    by the frequent coughing of the sorters. They protect their hair with
    turbans of veiling, occasionally decorated with a bit of bright color.
    These turbans give the room the appearance of an industrious Turkish
    harem. Short, sharp scythe blades, like Turkish scimeters, gleam above
    all the girls' benches. When a sorter wishes to cut a rag, she pulls it
    across the edge of this blade, and is not obliged to hunt for a pair of
    shears.
    
    Curious discoveries are frequently made in the rags. Old pockets,
    containing small sums of money, are occasionally found. A foreign coin
    valued at about $3 was found a few days ago. In the paper stock, quaint
    and valuable old books or pictures are found often. One of the workmen
    has a museum composed of curiosities found amid the rags and shreds of
    paper. Rev. Dr. Bolles, of Massachusetts, makes an annual pilgrimage
    to Mechanic Falls for the sake of the rare old pamphlets, books, and
    engravings that he may dig out.
    
    Stuffed in hogsheads, the rags are lowered from this room through
    a hatchway, and are given a red hot lime bath. They are placed in
    ponderous cylinders of boiler iron, which revolve horizontally in great
    gears high above the floor. A mixture of lime and water, which has been
    prepared in large brick vats, is poured over them. An iron door, secured
    by huge bolts, is closed on them. The cylinder slowly turns around, and
    churns the rags in the lime-juice twelve hours. This process is called
    bleaching. When the rags come out they are far from white, however. They
    are of a uniform dirty brown hue. But the colors have lost their gripe.
    When the rags shall have been submitted to the grinding and washing in
    pure water, as we shall see them presently, they are easily whitened.
    The lime bath is the purgatory of the paper stock.
    
    Before we go any further, we must see what becomes of those soft
    and lop-sided bundles which are going into the mills. These contain
    chemically prepared wood fiber, a certain percentage of which is used
    in nearly all the papers made now. It gives the paper a greater body,
    although its fiber is not so strong as that made of rags. The pulp comes
    down from Canton in soft brown sheets. These are at once bleached. The
    brown fiber is placed in a bath of cold water and chlorate of lime.
    There it quietly rests till a sediment settles at the bottom of the
    tank. At an opportune moment the workman pours in a copious libation
    of boiling water. This causes the escape of the chlorine gas, which
    destroys all the color in the pulp. In half an hour it comes out, a mass
    of smoking fibers as white as a snow heap. The drainers into which it
    goes are large pens with perforated tile floors. The pulp remains in the
    drainers till it so dry it is handled with a pitchfork.
    
    We are now ready to look at the beating machines, which have to perform
    a very important part in paper making. These are large iron tanks with
    powerful grinders revolving in them. Barrow loads of the brown rags are
    dumped into them, and clear cold water is poured in. The grinders are
    then started. They chew the rags into fine bits. They keep the mass
    of rags and water circulating incessantly in the tanks. Clean water
    constantly flows in and dirty water as constantly flows out. In the
    course of six hours the rags are reduced to a perfectly white pulpy
    mass. There is one mill, as we have said, devoted exclusively to the
    reduction of rags to this white pulp. It is dried in drainers such as we
    saw a few moments ago filled with the wood fiber.
    
    There are other beating machines just like these, which perform a
    slightly different service. Their function may be compared to that of an
    apothecary's mortar or a cook's mixing dish. The white rag stock and the
    white wood fiber are mixed in these, in the required proportions.
    At this stage, the pulp is adulterated with China clay, to give it
    substance and weight; here the sizing (composed of resin and sal soda)
    is put in; oil of vitriol, bluing, yellow ocher, and other chemicals are
    added, to whiten or to tint the paper. These beaters are much like
    so many soup kettles. Upon the kind, number, and proportion of the
    ingredients depends the nature of the product. The percentages of rag
    pulp, wood pulp, clay, coloring, etc., used, depend upon the quality of
    paper ordered.
    
    After the final beating, the mixture descends into a large reservoir
    called the "stuff chest," whence it is pumped to the paper machine. The
    pulp is of the consistency of milk when it pours from the spout of
    the pumps on the paper machine. The latter is a complicated series of
    rollers, belts, sieves, blankets, pumps, and gears, one hundred feet
    long. To describe it or to understand a description of it would require
    the vocabulary and the knowledge of a scientist. The milky pulp first
    passes over a belt of fine wire cloth, through which the water partly
    drains. It is ingeniously made to glide over two perforated iron plates,
    under which pumps are constantly sucking. You can plainly see the broad
    sheet of pulp lose its water and gain thickness as it goes over these
    plates. Broad, blanket-like belts of felt take it and carry it over and
    between large rolling cylinders filled with hot steam. These dry and
    harden it into a sheet which will support itself; and without the aid of
    blankets it winds among iron rolls, called calenders, which squeeze it
    and give it surface. It is wound upon revolving reels at the end of the
    machine.
    
    If a better surface or gloss is required, it is carried to the super
    calendering mill, where it is steamed and subjected to a long and
    circuitous journey up and down tall stands of calenders upon calenders.
    The paper is cut by machines having long, winding knives which revolve
    slowly and cut, on the scissors principle--no two points of the blade
    bearing on the paper with equal pressure at once. Girls pack the sheets
    on the tables as they fall from the cutters, and throw out the damaged
    or dirtied sheets. A small black spot or hole or imperfection of any
    sort is sufficient to reject a sheet. In some orders fifty per cent. of
    the sheets are thrown out. There is no waste, as the damaged paper is
    ground into pulp again. Having been cut, the paper must be counted and
    folded. Then it is packed into bundles for shipment. The young lady who
    does the counting and folding is the wonder of the mill. Giving the
    sheets a twist with one hand so as to spread open the edges, she gallops
    the fingers of the other hand among them; and as quickly as you or I
    could count three, she counts twenty-four and folds the quire. She takes
    four sheets with a finger and goes her whole hand and one finger more;
    thus she gets twenty-four sheets. Long practice is required to do the
    counting rapidly and accurately. Twenty-four sheets, no more and no
    less, are always found in her quires.
    
    Papers of different grades are made of different stock, but by the same
    process. Some paper stock is used. This must be bleached in lime and
    soda ash. There are powerful steam engines in the mills for use when
    the water is low. There are large furnaces and boilers which supply the
    steam used in the processes.
    
    The Messrs. Denison employ 175 hands at Mechanic Falls. Their pay roll
    amounts to about $5,000 per month. The mills produce 350,000 pounds of
    paper per month and they ship several car-loads of prepared wood-pulp,
    in excess of that required for their own use, weekly. The annual value
    of their product is not far from $300,000. They use, for sundries,
    each month, 300 tons of coal, 100 casks of common lime, 250 gallons of
    burning-oil, 28,000 pounds of chlorate of lime, 3,700 pounds of soda
    ash. 10,000 pounds of resin. 24,000 pounds of sal soda, 22,000 pounds of
    oil of vitriol, 22,000 pounds of China clay, etc.
    
           *       *       *       *       *
    
    
    
    
    WHEAT-MEAL BREAD AS A MEANS OF DIMINISHING TUBERCULAR DISEASE.
    
    
    By M. YATES, Hon. Sec. Bread Reform League, London.
    
    It is well recognized that defective mineral nutrition is an important
    factor in the production of rickets and bad teeth, but as its
    influence in predisposing toward tuberculous disease is not so clearly
    ascertained, will you kindly allow public attention to be directed to
    a statement which was discussed at the Social Science and Sanitary
    Congresses and which, if confirmed by further scientific research,
    indicates a simple means of diminishing consumption, which, as Dr.
    William Fair, F.R.S., says, "is the greatest, the most constant, and the
    most dreadful of all the diseases that affect mankind." In "Phosphates
    in Nutrition," by Mr. M.F. Anderson, it is stated that although the
    external appearances and general condition of a body when death has
    occurred from starvation are very similar to those presented in
    tuberculous disease, in starvation, "from wasting of the tissues, caused
    by the combustion of their organic matter, there would be an apparent
    _increase_ in the percentage proportion of mineral matter; on the other
    hand, in tubercular disease, there would be a material _decrease_ in the
    mineral matter as compared with the general wasting." Analyses, made
    by Mr. Anderson, of the vascular tissues of patients who have died
    of consumption, scrofula, and allied diseases, show "a very marked
    deficiency in the quantity of inorganic matter entering into their
    composition; this deficiency is not confined to the organs or tissues
    which are apparently the seat of the disease, but in a greater or lesser
    degree pervades the whole capillary system."
    
    The observations of Dr. Marcet, F.R.S., show that in phthisis there is
    a considerable reduction of the normal amount of phosphoric acid in the
    pulmonary tissues; and it is very probable that there is a general drain
    of phosphoric acid from the system.
    
    This loss may be caused by the expectoration and night-sweats, or it may
    also be produced by defective mineral nutrition, either from deficient
    supply in the food, or from non assimilation. But, whatever causes this
    deficiency, it is universally acknowledged that it is essential the food
    should contain a proper supply of the mineral elements. If the body is
    well nourished, the resisting force of the system is raised. Professor
    Koch and others, who accept the germ theory of disease to its fullest
    extent, state that the minute organisms of tubercular disease do not
    occur in the tissues of healthy bodies, and that when introduced into a
    living body their propagation and increase are greatly favored by a low
    state of the general health.
    
    Dr. Pavy, F.R.S., showed in his address on the "Dietetics of Bread" that
    in white flour, instead of obtaining the 23 parts of mineral matter
    to 100 parts of nitrogenous matter--which is the accepted ratio of
    a standard diet--we should only get 4.20 parts of mineral matter.
    Professor Church states that 1 lb. of white flour has only 49 grains of
    mineral matter, while 1 lb. of whole wheat meal has 119 grains. Whole
    wheat meal, besides containing other essential mineral elements,
    has double the amount of lime, and nearly three times the amount of
    phosphoric acid; so that if defective mineral nutrition in any way
    predisposes to consumption, the adoption of wheat meal prepared in a
    digestible and palatable form is of primary importance for those who are
    unable to obtain the phosphates from high-priced animal foods.
    
    Wheat meal has also great advantages for those who are able to afford
    animal food, for, as Dr. Pavy stated, "It acts as a greater stimulant to
    the digestive organs."
    
    It is probably due to this stimulating property of wheat meal that
    people who have adopted it find they can digest animal fat much better
    than previously. If this is corroborated by general experience, it may
    be of great benefit in aiding the system to resist tendencies toward
    consumption and scrofula, for these diseases are generally accompanied
    by loss of the power of assimilating fat. It is believed that a
    deficiency of oleaginous matter is a predisposing cause of tuberculous
    disease. An important prophylactic, therefore, against such maladies,
    would be a general increase in the use of butter and other fatty foods.
    
    There is such good reason to believe that a low state of nutrition
    favors the development of tuberculous disease, that parents cannot be
    too strongly urged to provide their children with a proper supply of
    healthy, nourishing, and pure food (under which term must, of course, be
    included pure air and pure water), for by so doing they may often arrest
    consumptive tendencies, and thus would be diminished the ravages of
    that fatal disease which, when once established, is "the despair of the
    physician, and the terror of the public."
    
           *       *       *       *       *
    
    
    
    
    THE NEW YORK FISH COMMISSION PONDS AT CALEDONIA.
    
    
    The capacity of the New York State fish farm at Caledonia is 6,000,000
    fry a year. The recently issued report of the fish commissioners says
    that this year the ponds will be worked to their full capacity.
    
    The supply of spawn has been greater than could be hatched there, and
    supplies were sent to responsible persons in every State in the Union to
    be experimented with. At the date of issuing the report the supply of
    stock fish at the hatchery embraced, it was estimated, a thousand salmon
    trout, of weights ranging from four to twelve pounds; ten thousand
    brook trout, from half a pound to two pounds in weight; thirty thousand
    California mountain trout, weighing from a quarter of a pound to three
    pounds; forty-seven hundred rainbow trout, of from a quarter of a
    pound to two pounds' weight; and a large number of hybrids produced by
    crossing and interbreeding of different members of the salmon tribe. In
    this connection reference is made to the interesting fact that hybrids
    of the fish family are not barren. Spawners produced by crossing the
    male brook trout with the female salmon trout cast 72,000 eggs last
    fall, which hatched as readily as the spawn of their progenitors. The
    value of the stock of breeding fish at the hatchery is estimated at
    $20,000.
    
    The hatch of salmon trout this season was not far from 1,200,000, and
    these will be distributed chiefly in the large lakes of the interior.
    About a million little brook trout were produced. The commission doubts
    whether much benefit has resulted from attempting to stock small streams
    that have once been good trout waters, but the temperature of which has
    been changed by cutting away the forest trees that overhung them. The
    best results have been attained where the waters are of considerable
    extent, especially those in and bordering on the wilderness in the
    northern part of the State. The experiments with California trout, have
    been very successful, and it is found that the streams most suitable for
    them, are the Hudson, Genesee, Mohawk, Moose, Black, and Beaver rivers,
    and the East and West Canada creeks. The commission hopes to hatch
    6,000,000 or 8,000,000 shad this season at a cost of about $1,000.
    Concerning German carp, the commissioners find that the water at
    Caledonia is too cold for this fish, but think that carp would do well
    in waters further south.
    
    The commission awaits a more liberal appropriation of money before
    beginning the work of hatching at the new State fish farm at Cold
    Spring, on the north side of Long Island, thirty miles out from
    Brooklyn.
    
           *       *       *       *       *
    
    
    
    
    MIOCENE MAN.
    
    
    Grant Allen, an English evolutionist, gives this imaginary picture
    of our supposed ancestor: "We may not unjustifiably picture him to
    ourselves as a tall and hairy creature, more or less erect, but with a
    slouching gait, black faced and whiskered, with prominent, prognathous
    muzza, and large, pointed canine teeth, those of each jaw fitted into
    an interspace in the opposite row. These teeth, as Mr. Darwin suggests,
    were used in the combats of the males. His forehead was no doubt low and
    retreating, with bony bosses underlying the shaggy eyebrows, which
    gave him a fierce expression, something like that of the gorilla. But
    already, in all likelihood, he had learned to walk habitually erect, and
    had begun to develop a human pelvis, as well as to carry his head more
    straight on his shoulders. That some such animal must have existed seems
    to me an inevitable corollary from the general principles of evolution
    and a natural inference from the analogy of other living genera."
    
           *       *       *       *       *
    
    
    
    
    GOULIER'S TUBE-GAUGE.
    
    
    As well known, the method by which glass barometer tubes are made gives
    them variable calibers. Not only do the different tubes vary in size,
    but even the same tube is apt to have different diameters throughout
    its length, and its sections are not always circular. Manufacturers
    of barometers often have need to know exactly the dimensions of the
    sections of these tubes, and to ascertain whether they are equal
    throughout a certain length of tube, and this is especially necessary in
    those instruments in which the surfaces of the sections of the reservoir
    and tube must bear a definite ratio to one another. Having ascertained
    that no apparatus existed for measuring the caliber of these and
    anolagous tubes, and that manufacturers had been accustomed to make the
    measurements by roundabout methods, Colonel Goulier has been led to
    devise a small apparatus for the purpose, and which is shown in the
    accompanying cuts.
    
    [Illustration: GOULIER'S TUBE GAUGE. (Plan and longitudinal and
    tranverse sections.)]
    
    The extremity of a brass tube, T, 0.5 to 0.6 of a meter in length and
    smaller in diameter than the tube to be gauged, is cut into four narrow
    strips a few centimeters in length. The extremity of each of these
    strips is bent toward the axis of the tube. Two of them, m and m',
    opposite each other are made very flexible, and carry, riveted to their
    extremities, two steel buttons, the heads of which, placed in the
    interior, have the form of an obtuse quoin with rounded edge directed
    perpendicular to the tube's axis. The other extremities of these buttons
    are spherical and polished and serve as caliper points in the operation
    of measuring. These buttons are given a thickness such that when the
    edges of their heads are in contact, the external diameter of the tube
    exceeds the distance apart of the two calibrating points by more than
    one millimeter. But such distance apart is increased within certain
    limits by inserting between the buttons a German silver wedge, L,
    carried by a rod, t, which traverses the entire tube, and which is
    maneuvered by a head, B, fixed to its extremity. This rod carries a
    small screw, v, whose head slides in a groove, r, in the tube, so as
    to limit the travel of the wedge and prevent its rotation. Beneath the
    head, B, the rod is filed so as to give it a plane surface for the
    reception of a divided scale. A corresponding slit in the top of the
    tube carries the index, I, of the scale. The principal divisions of the
    scale have been obtained experimentally, and traced opposite the index
    when the calibrating points were exactly 7, 8, 9 etc., millimeters
    apart. As the angle of the wedge is about one tenth, the intervals
    between these divisions are about one centimeter. These intervals are
    divided into ten parts, each of which corresponds to a variation in
    distance of one tenth of a millimeter.
    
    To calibrate a glass tube with this instrument, the tube is laid upon
    the table, the gauge is inserted, and the buttons are introduced into
    the section desired. The flat side of the head, B, being laid on the
    table, arranges, as shown in the figure, the buttons perpendicular to
    it. Then the measuring wedge is introduced until a stoppage occurs
    through the contact of the buttons with the sides of the tube. Finally,
    their distance apart is read on the scale. Such distance apart will be
    the measure of a diameter or a chord of the tube's section, according as
    the buttons have been kept in the diametral plane or moved out of it. In
    order that the operator shall not be obliged to watch the position of
    the line of calibrating buttons in obtaining the diameter, the following
    arrangement has been devised: The sides of the measuring wedge are filed
    off to a certain angle, and the ends of the corresponding strips, d and
    d', are bent inward in the form of hooks, whose extremities always rest
    on the faces of the directing wedges. The length of these hooks and the
    angle of the wedge are such that the distance apart of the rounded backs
    of the directing strips is everywhere less, by about one-thirtieth, than
    that of the calibrating buttons. From this it will be seen that if the
    wedge be drawn back, and inserted again after the tube has been turned,
    we shall measure the diameter that is actually vertical. It becomes
    possible, then, to determine the greatest and smallest diameters in a
    few minutes; and, supposing the section elliptical, its area will be
    obtained by multiplying the product of these two diameters by pi/4.
    
    From the description here given it will be seen that Colonel Goulier's
    apparatus is not only convenient to use, but also permits of obtaining
    as accurate results as are necessary. Two sizes of the instrument are
    made, one for diameters of from 7 to 10.5 mm., and the other for those
    of from 10 to 15.5 mm. It is the former of these that is shown, of
    actual size, in the cuts.
    
           *       *       *       *       *
    
    
    
    
    SOLDERING WITHOUT AN IRON.
    
    
    The following method for soldering without the use of a soldering iron
    is given in the _Techniker_:
    
    The parts to be joined are made to fit accurately, either by filing
    or on a lathe. The surfaces are moistened with the soldering fluid, a
    smooth piece of tin foil laid on, and the pieces pressed together and
    tightly wired. The article is then heated over the fire or by means of
    a lamp until the tin foil melts. In this way two pieces of brass can be
    soldered together so nicely that the joint can scarcely be found.
    
    With good soft solder, nearly all kinds of soldering can be done over
    a lamp without the use of a "copper." If several piaces have to
    be soldered on the same piece, it is well to use solder of unlike
    fusibility. If the first piece is soldered with fine solder composed of
    2 parts of lead, 1 of tin, and 2 of bismuth, there is no danger of its
    melting when another place near it is soldered with bismuth solder, made
    of 4 parts of lead, 4 of tin, and 1 of bismuth, for their melting points
    differ so much that the former will not melt when the latter does. Many
    solders do not form any malleable compounds.
    
    In soldering together brass, copper, or iron, hard solder must be
    employed; for example, a solder made of equal parts of brass and silver
    (!). For iron, copper, or brass of high melting point, a good solder is
    obtained by rolling a silver coin out thin, for it furnishes a tenacious
    compound, and one that is not too expensive, since silver stretches out
    well. Borax is the best flux for hard soldering. It dissolves the oxides
    which form on the surface of the metal, and protects it from further
    oxidation, so that the solder comes into actual contact with the
    surfaces of the metal. For soft soldering, the well-known fluid, made by
    saturating equal parts of water and hydrochloric acid with zinc, is to
    be used. In using common solder rosin is the cheapest and best flux. It
    also has this advantage, that it does not rust the article that it is
    used on.--_Deutsche Industrie Zeitung_.
    
           *       *       *       *       *
    
    
    
    
    WORKING COPPER ORES AT SPENCEVILLE.
    
    
    From a letter in the Grass Valley _Tidings_ we make the following
    extracts:
    
    The Spenceville Copper Mining Company have 43 acres of copper-bearing
    ground and 100 acres of adjoining land, which was bought for the timber.
    There are a hoisting works, mill, roasting sheds, and leaching vats on
    the ground, and they cover several acres.
    
    On going around with Mr. Ellis, the first place we came to was the mine
    proper, which is simply an immense opening in the ground covering about
    one half of an acre, and about 80 feet deep. It has an incline running
    down into it, by which the ore is hoisted to the surface. Standing on
    the brink of this opening and looking down, we could see the men at
    work, some drilling, others filling and running the cars to the incline
    to be hoisted to the surface.
    
    The ore is found in a sort of chloritic slate and iron pyrites which
    follow the ledge all around. The ore itself is a fine-grained pyrite,
    with a grayish color, and it is well suited by its sulphur and low
    copper contents, as well as by its properties for heap roasting. In heap
    roasting, the ore is hand-broken by Chinamen into small lumps before
    being hoisted to the surface. From the landing on the surface it is run
    out on long tracks under sheds, dumped around a loose brick flue and on
    a few sticks of wood formed in the shape of a V, which runs to the flues
    to give a draught. Layers of brush are put on at intervals through the
    pile. The smaller lumps are placed in the core of the heap, the larger
    lumps thrown upon them, and 40 tons of tank residues thrown over all to
    exclude excess of air; 500 lb. of salt is then distributed through the
    pile, and it is then set afire. After well alight the draught-holes are
    closed up, and the pile is left to burn, which it does for six months.
    At the expiration of that time the pile is broken into and sorted, the
    imperfectly roasted ore is returned to a fresh roast-heap, and the rest
    trammed to the
    
    
    LEACH-VATS.
    
    These are 50 in number, 10 having been recently added. The first 40 are
    four feet by six feet and four feet deep, the remaining 10 twice as
    large. About two tons of burnt ore is put in the small vats (twice as
    much in the larger ones), half the vats being tilled at one time, and
    then enough cold water is turned in to cover the ore. Steam is then
    injected beneath the ore, thus boiling the water. After boiling for some
    time, the steam is turned off and the water allowed to go cold. The
    water, which after the boiling process turns to a dark red color, is
    then drawn off. This water carries the copper in a state of solution.
    The ore is then boiled a second time, after which the tank residues are
    thrown out and water kept sprinkling over them. This water collects the
    copper still left in the residues, and is then run into a reservoir, and
    from the reservoirs still further on into settling tanks, previous to
    
    
    PRECIPITATION,
    
    and is then conducted through a system of boxes filled with scrap iron,
    thus precipitating the copper.
    
    The richer copper liquors which have been drawn from the tanks fire not
    allowed to run in with that which comes from the dump heaps. This liquor
    is also run into settling tanks, and from them pumped into four large
    barrels, mounted horizontally on friction rollers, to which a very slow
    motion is given. These barrels are 18 feet long and six feet six inches
    deep outside measure. They are built very strongly, and are water-tight.
    Ten tons of scrap iron are always kept in each of these barrels, which
    are refilled six times daily, complete precipitation being effected in
    less than four hours. Each barrel is provided with two safety valves,
    inserted in the heads, which open automatically to allow the escape of
    gas and steam. The precipitation of the copper in the barrels forms
    copper cement. This cement is discharged from the barrels on to screens
    which hold any lumps of scrap iron which may be discharged with the
    cement. It is then dried by steam, after which it is conveyed into
    another tank, left to cool, and then placed in bags ready for shipment,
    as copper cement. The building in which the liquor is treated is the
    mill part of the property, from which they send out 42 tons monthly of
    an average of 85 per cent, of copper cement, this being the average
    yield of the mine.
    
    There are 23 white men and 40 Chinamen employed at the mine and the
    mill. There are also several wood choppers, etc., on the company's
    pay-roll. Eight months' supply of ore is always kept on hand, there
    now being 12,000 tons roasting. The mine is now paying regular monthly
    dividends, and everything argues well for the continuance of the same.
    
           *       *       *       *       *
    
    
    
    
    SIR WILLIAM THOMSON'S PILE.
    
    
    The Thomson pile, which is employed with success for putting in action
    the siphon recorder, and which is utilized in a certain number of cases
    in which an energetic and constant current is needed, is made in two
    forms. We shall describe first the one used for demonstration. Each
    element of this (Fig. 1) consists of a disk of copper placed at the
    bottom of a cylindrical glass vessel, and of a piece of zinc in the form
    of a grating placed at the upper part, near the surface of the solution.
    A glass tube is placed vertically in the solution, its lower extremity
    resting on the copper. Into this tube are thrown some crystals of
    sulphate of copper, which dissolve in the liquid, and form a solution of
    a greater density than that of the zinc alone, and which, consequently,
    cannot reach the zinc by diffusion. In order to retard the phenomenon of
    diffusion, a glass siphon containing a cotton wick is placed with one of
    its extremities midway between the copper and zinc, and the other in
    a vessel outside the element, so that the liquid is sucked up slowly
    nearly to its center. The liquid is replaced by adding from the top
    either water or a weak solution of sulphate of zinc.
    
    [Illustration: FIG. 1.--THE THOMSON PILE.(Type for demonstration.)]
    
    The greater part of the sulphate of copper that rises through the liquid
    by diffusion is carried off by the siphon before reaching the zinc, the
    latter being thus surrounded with an almost pure solution of sulphate
    of copper having a slow motion from top to bottom. This renewal of the
    liquid is so much the more necessary in that the saturated solution of
    sulphate of copper has a density of 1.166, and the sulphate of zinc
    one of 1.445, There would occur, then, a mixture through inversion of
    densities if the solution were allowed to reach a too great amount of
    saturation, did not the siphon prevent such a phenomenon by sucking up
    the liquid into the part where the mixture tends to take place. The
    chemical action that produces the current is identical with that of the
    Daniell element.
    
    In its application, this pile is considerably modified in form
    and arrangement. Each element (Fig 2) consists of a flat wooden
    hopper-shaped trough, about fifty centimeters square, lined with sheet
    lead to make it impervious. The bottom is covered with a sheet of copper
    and above this there is a zinc grate formed of closely set bars that
    allow the liquid to circulate. This grate is provided with a rim which
    serves to support a second similar element, and the latter a third,
    and soon until there are ten of the elements superposed to form series
    mounted for tension. The weight of the elements is sufficient to secure
    a proper contact between the zinc and copper of the elements placed
    beneath them, such contact being established by means of a band of
    copper cut out of the sheet itself, and bent over the trough.
    
    [Illustration: FIG. 2.--THE THOMSON PILE. (Siphon Recorder Type.)]
    
    On account of the large dimensions of the elements, and the proximity
    of the two metals, a pile is obtained whose internal resistance is very
    feeble, it being always less than a tenth of an ohm when the pile is
    in a good state, and the electromotive force being that of the Daniell
    element--about 1 08 volts.
    
    Sometimes the zinc is covered with a sheet of parchment which more
    thoroughly prevents a mixture of the liquids and a deposit of copper on
    the zinc. But such a precaution is not indispensable, if care be taken
    to keep up the pile by taking out some of the solution of sulphate of
    zinc every day, and adding sulphate of copper in crystals. If the pile
    is to remain idle for some time, it is better to put it on a short
    circuit in order to use up all the sulphate of copper, the disappearance
    of which will be ascertained by the loss of blue color in the liquid. In
    current service, on the contrary, a disappearance of the blue color will
    indicate an insufficiency of the sulphate, and will be followed by a
    considerable reduction in the effects produced by the pile.
    
    The great power of this pile, and its constancy, when it is properly
    kept up, constitute features that are indispensable for the proper
    working of the siphon recorder--the application for which it was more
    especially designed.
    
    This apparatus has been also employed under some circumstances for
    producing an electric light and charging accumulators; but such
    applications are without economic interest, seeing the enormous
    consumption of sulphate of copper during the operation of the pile.
    The use of the apparatus is only truly effective in cases where it is
    necessary to have, before everything else, an energetic and exceedingly
    constant current.--_La Nature_.
    
           *       *       *       *       *
    
    
    
    
    SIEMENS' TELEMETER
    
    
    The accompanying cut illustrates a telemeter which was exhibited at the
    Paris Exhibition of Electricity, and which is particularly interesting
    from the fact that it is the first apparatus of this kind. It will be
    remembered that the object of a telemeter is to make known at any moment
    whatever the distance of a movable object, and that, too, by a direct
    reading and without any calculation. In Mr. Siemens' apparatus the
    problem is solved in the following manner:
    
    The movable object (very often a vessel) is sighted from two different
    stations--two points of the coast, for example--by two different
    observers. The sighting is done with two telescopes, A1 and A2, which
    the observers revolve around a vertical axis by means of two winches, K1
    and K2, that gear with two trains of clockwork. There is thus constantly
    formed a large triangle, having for its apices the movable point sighted
    and the vertical axes, A1 and A2, of the two telescopes. On another
    hand, at a point situated between the two telescopes, there is a table,
    T T, that carries two alidades, a1v1, and a2v2, movable around their
    vertical axes, a1 and a2. The line, a1 a2, that joins these axes is
    parallel with that which joins the axes of the two telescopes; and the
    alidades are connected electrically with the telescopes by a system
    such that each alidade always moves parallel with the telescope that
    corresponds to it. It follows from this that the small triangle that
    has for apices, a1 a2, and the crossing point of the two alidades will
    always be like the large triangle formed by the line that joins the
    telescopes and the two lines of vision. If, then, we know the ratio of
    a1, a2 to A1 A2, it will suffice to measure on one of the alidades the
    distance from its axis to the point of crossing in order to know the
    distance from the movable object to the axis of the corresponding
    telescope. If the table, T T, be covered with a chart giving the space
    over which the ship is moving, so that a1 and a2 shall coincide with the
    points which A1 and A2 represent, the crossing of the threads of the
    alidades will permit of following on the chart all the ship's movements.
    In this way there maybe had a powerful auxiliary in coast defence; for
    all the points at which torpedoes have been sunk may be marked on the
    chart, and, as soon as the operator at the table finds, by the motion
    of the alidades, that the ship under observation is directly over a
    torpedo, he will be able to fire the latter and blow the enemy up.
    During this time the two observers at A1 and A2 have only to keep their
    telescopes directed upon the vessel that it has been agreed upon to
    watch.
    
    [Illustration: SIEMENS' ELECTRIC TELEMETER]
    
    In order to obtain a parallelism between the motion of the alidades and
    that of the corresponding telescopes, the winch of each of the latter,
    while putting its instrument in motion, also sets in motion a Siemens
    double-T armature electromagnetic machine. One of the wires of the
    armature of this machine, connected to the frame, is always in
    communication with the ground at E1 (if we consider, for example, the
    telescope to the left), and the other ends in a spring that alternately
    touches two contacts. One of these contacts communicates with the
    wire, L1 and the other with the wire, L3, so that, when the machine is
    revolving, the currents are sent alternately into L1 and L3. These two
    latter wires end in a system of electro magnets, M1, provided with a
    polarized armature. The motions of the latter act, through an anchor
    escapement, upon a system of wheels. An axle, set in motion by the
    latter, revolves one way or the other, according to the direction of the
    telescope's motions. This axle is provided with an endless screw that
    gears with a toothed sector, and the latter controls the rotatory axis
    of the alidade. The elements of the toothed wheels and the number of
    revolutions of the armature for a given displacement of the telescope
    being properly calculated, it will be seen that the alidade will be able
    to follow all the movements of the latter.
    
    When it is desired to place one of the telescopes in a given position
    (its position of zero, for example), without acting on the alidade,
    it may be done by acting directly on the telescope itself without the
    intermedium of the winch. For such purpose it is necessary to interrupt
    communication with the mechanism by pressing on the button, q. If the
    telescope be turned to one side or the other of its normal position,
    in making it describe an angle of 90°, it will abut against stops, and
    these two positions will permit of determining the direction of the
    base.
    
    The alidades themselves are provided with a button which disengages the
    toothed sector from the endless screw, and permits of their being
    turned to a mark made on the table. A regulating screw permits of this
    operation being performed very accurately. In what precedes, we have
    supposed a case in which the movable point is viewed by two observers,
    and in which the table, T T, is stationed at a place distant from them.
    In certain cases only two stations are employed. One of the telescopes
    is then placed over its alidade and moves with it; and the apparatus
    thus comprehends only a system of synchronous movements.
    
    This telemeter was one of the first that was tried in our military
    ports, and gave therein most satisfactory results. The maneuver of the
    winch, however, requires a certain amount of stress, and in order that
    the sending of the currents shall be regular, the operator must turn it
    very uniformly. This is a slight difficulty that has led to the use
    of piles, instead of the magneto-electric machine, in the apparatus
    employed in France. With such substitution there is need of nothing more
    than a movable contact that requires no exertion, and that may be guided
    by the telescope itself.--_La Lumière Electrique_.
    
           *       *       *       *       *
    
    
    
    
    PHYSICS WITHOUT APPARATUS.
    
    
    _Experiment in Static Electricity_.--Take a pipe--a common clay one
    costing one cent--and balance it carefully on the edge of a goblet, so
    that it will oscillate freely at the least touch, like the beam of a
    scales. This being done, say to your audience: "Here is a pipe placed
    on the edge of a goblet; now the question is to make it fall without
    touching it, without blowing against it, without touching the glass,
    without agitating the air with a fan, and without moving the supporting
    table"
    
    [Illustration: CLAY PIPE ATTRACTED BY AN ELECTRIFIED GOBLET.]
    
    The problem thus proposed may be solved by means of electricity. Take a
    goblet like the one that supports the pipe, and rub it briskly against
    your coat sleeve, so as to electrify the glass through friction. Having
    done this, bring the goblet to within about a centimeter of the pipe
    stem. The latter will then be seen to be strongly attracted, and will
    follow the glass around and finally fall from its support.
    
    This curious experiment is a pretty variation of the electric pendulum;
    and it shows that pipe-clay--a very bad conductor of electricity--favors
    very well the attraction of an electrified body.
    
    Tumblers or goblets are to be found in every house, and a clay pipe
    is easily procured anywhere. So it would be difficult to produce
    manifestations of electricity more easily and at less expense than by
    the means here described.--_La Nature_.
    
           *       *       *       *       *
    
    
    
    
    THE CASCADE BATTERY.
    
    [Footnote: Lately read before the Society of Telegraph Engineers and
    Electricians.]
    
    By F. HIGGINS.
    
    
    The battery which I have brought here to-night to introduce to your
    notice is of the circulating kind, in which the alimentary fluid
    employed passes from cell to cell by gravitation, and maintains the
    action of the battery as long as it continues to flow. It cannot,
    of course, compare with such abundant sources of electricity as
    dynamo-electric machines driven by steam power, but for purposes in
    which a current of somewhat greater volume and constancy than that
    furnished by the ordinary voltaic batteries is required, it will, I
    believe, be found in some cases useful. A single fluid is employed, and
    each cell is provided with an overflow spout.
    
    The cells are arranged upon steps, in order that the liquid may flow
    from the cell on the topmost step through each successive cell by
    gravitation [specimen cells were on the table before the audience] to
    the reservoir at the bottom. The top and the bottom reservoirs are of
    equal capacity, and are fitted with taps. The topmost tap is used to
    regulate the flow of the solution, and the bottom one to draw it off. In
    each cell two carbon plates are suspended above a quantity of fragments
    of amalgamated zinc. The following is a sectional drawing of the
    arrangement of the cell:
    
    [Illustration]
    
    A copper wire passes down to the bottom of the cell and makes connection
    with the mercury; this wire is covered with gutta-percha, except where
    immersed in the mercury. The pores of the carbon plates are filled
    with paraffin wax. This battery was first employed for the purpose of
    utilizing waste solution from bichromate batteries, a great quantity of
    which is thrown away before having been completely exhausted. This waste
    is unavoidable, in consequence of the impossibility of permitting such
    batteries, when employed for telegraphic purposes, to run until complete
    exhaustion or reduction of the solutions has been effected; therefore
    some valuable chemicals have to be sacrificed to insure constancy in
    working. The fragments of zinc in this cell were also the remains of
    amalgamated zinc plates from the bichromate batteries, and the mercury
    which is employed for securing good metallic connection is soon
    augmented by that remaining after the dissolution of the zinc. It will
    therefore be seen that not only the solution, but also the zinc and
    mercury remnants of bichromate batteries are utilized, and at the same
    time a considerable quantity of electricity is generated. The cells are
    seven inches deep and six inches wide, outside, and contain about a
    quart of solution in addition to the plates. The battery which I employ
    regularly, consisting of 18 cells, is at present working nine permanent
    current Morse circuits, which previously required 250 telegraphic
    Daniell cells to produce the same effect, and is capable of working at
    least ten times the number of circuits which I have mentioned; but as we
    do not happen to have any more of such permanent current Morse circuits,
    we are unable to make all the use possible of the capabilities of the
    battery. The potential of one cell is from 1.9 to 2 volts with strong
    solution, and the internal resistance varies from 0.108 to 0.170 of an
    ohm with cells of the size described. In order to test the constancy of
    the battery, a red heat was maintained in a platinum-iridium wire by the
    current for six weeks, both day and night.
    
    The absence or exhaustion of the zinc in any one cell in a battery is
    indicated by the appearance of a red insoluble chromic salt of mercury,
    in a finely divided state, floating in the faulty cell. It is then
    necessary to drop in some pieces of zinc. The state of the zinc supply
    may also be ascertained at any time by feeling about in the cells with a
    stick. When not required, the battery may be washed by simply charging
    the top reservoir with water, and leaving it to circulate in the usual
    manner, or the solution may be withdrawn from each cell by a siphon. A
    very small flow of the solution is sufficient to maintain the required
    current for telegraphic working, but if the flow be stopped altogether
    for a few hours, no difference is observed in the current, although when
    the current is required to be maintained in a conductor of a few ohms
    resistance, as in heating a platinum wire, it is necessary that the
    circulation be maintained [heating a piece of platinum ribbon]. The
    battery furnishing the current for producing the effect you now see is
    of five cells, and as that number is reduced down to two, you see a glow
    still appears in the platinum. The platinum strip employed was 5 inches
    long and 1/8 inch wide, its resistance being 0.42 ohm, cold. That gives
    an idea of the volume of current flowing. I have twelve electro magnets
    in printing instruments joined up on the table, and [joining up the
    battery] you see that the two cells are sufficient to work them. The
    twelve electro-magnets are being worked (by the two cells) in multiple
    arc at the same time. The current from the cells which heated the
    platinum wire is amply sufficient to magnetize a Thomson recorder. I
    have maintained five inches of platinum ribbon in a red hot state for
    two hours, in order to make sure that the battery I was about to bring
    before you was in good order. The cost of working such a battery when
    waste solution cannot be obtained, and it is necessary to use specially
    prepared bichromate solution, is about 2¼d. per cell per day, with a
    current constantly active in a Thomson recorder circuit, or a resistance
    of 1½ ohms per cell; but if only occasionally used, the same quantity of
    solution will last several weeks.
    
    A comparison of this with another form of constant battery, the Daniell,
    as used in telegraphy, shows that six of these cells, with a total
    electromotive force of 12 volts and an internal resistance of 0.84 of
    an ohm, cannot be replaced by less than 71 batteries of 10 cells each,
    connected in multiple arc, or for quantity. This result, however large
    it may appear, is considerably below that which may be obtained when
    working telegraphic lines. A current of 0.02 weber, or ampere, will work
    an ordinary sounder or direct writing Morse circuit; the cascade battery
    is capable of working 100 such circuits at the same time, while the
    combined resistance of that number of lines would not be below that in
    which it is found that the battery is constant in action.
    
    Objection may be made to the arrangement of the battery on the score of
    waste of zinc by local action, because of the electro positive metal
    being exposed to the chromic liquid; but if the battery be out of action
    and the circulation stopped, the zinc amalgam is protected by the
    immobility of the liquid and the formation of a dense layer of sulphate
    of zinc on its surface. When in action, that effect is neutralized from
    the fact that carbon in chromic acid is more highly electro-negative
    than the chromate of mercury formed upon the zinc amalgam, and which
    appears to be the cause of the dissolution of the zinc even when
    amalgamated in the presence of chromic acid. The solution may be
    repeatedly passed through the battery until the absence of the
    characteristic warmth of color of chromic acid indicates its complete
    exhaustion. During a description before the Society of thermo-electric
    batteries some time ago, Mr. Preece mentioned that five of the
    thermopiles which were being tried at the Post-Office were doing the
    work of 2,535 of the battery cells previously employed. Thirty of
    the cascade cells would have about the same potential as five such
    thermopiles, but would supply three and a half times the current, and be
    capable of doing the work of 8,872 cells if employed upon the universal
    battery system in the same manner as the thermo batteries referred to.
    
    Although this battery will do all that is required for a Thomson
    recorder or a similar instrument much more cheaply in this country than
    the tray battery, and with half the number of cells, I do not think it
    would be the case in distant countries, on account of the difficulty and
    cost of transport. A solid compound of chromic and sulphuric acids could
    be manufactured which would overcome this difficulty, if permanent
    magnetic fields for submarine telegraphic instruments continue to be
    produced by electric vortices. In conclusion, and to enable comparisons
    to be made, I may mention that the work this battery is capable of
    performing is 732,482 foot pounds, at a total cost of 1s. 6d.
    
           *       *       *       *       *
    
    
    [FROM THE SCHOOL JOURNAL.]
    
    
    
    
    PERFECTLY LOVELY PHILOSOPHY.
    
    
    CHARACTERS: Laura and Isabel, dressed very stylishly, both with hats on.
    Enter hand in hand.
    
    _Laura_. My dear Isabel, I was so afraid you would not come. I waited
    at that horrid station a full half hour for you. I went there early on
    purpose, so as to be sure not to miss you.
    
    _Isabel_. Oh, you sweet girl!
    
    _L_. Now, sit right down; you must be tired. Just lay your hat there on
    the table, and we'll begin to visit right off. (_Both lay their hats on
    the table and stand near by_.)
    
    _I_. And how have you been all the ages since we were together at
    Boston?
    
    _L_. Oh, well, dear; those were sweet old school days, weren't they. How
    are you enjoying yourself now? You wrote that you were taking lessons in
    philosophy. Tell me how you like it. Is it real sweet?
    
    _I_ Oh, those I took in the winter were perfectly lovely! It was about
    science, you know, and all of us just doled on science.
    
    _L_. It must have been nice. What was it about?
    
    _I_. It was about molecules as much as anything else, and molecules are
    just too awfully nice for anything. If there's anything I really enjoy,
    it's molecules.
    
    _L_. Oh, tell me about them, dear. What are molecules?
    
    _I_. They are little wee things, and it takes ever so many of them, you
    know. They are so sweet! Do you know, there isn't anything but that's
    got a molecule in it. And the professors are so lovely! They explained
    everything so beautifully.
    
    _L_. Oh, how I'd like to have been there!
    
    _I_. You'd have enjoyed it ever so much. They teach protoplasm, too,
    and if there's one thing that is too sweetly divine, it's protoplasm. I
    really don't know which I like best, protoplasm or molecules.
    
    _L_. Tell me about protoplasm. I know I should adore it!
    
    _I_. 'Deed you would. It's just too sweet to live. You know it's about
    how things get started, or something of that kind. You ought to have
    heard the professors tell about it. Oh. dear! (_Wipes her eyes with
    handkerchief_) The first time he explained about protoplasm there wasn't
    a dry eye in the room. We all named our hats after the professors. This
    is a Darwinian hat. You see the ribbon is drawn over the crown this way
    (_takes hat and illustrates_), and caught with a buckle and bunch of
    flowers. Then you turn up the side with a spray of forget me-nots.
    
    _L_. Oh, how utterly sweet! Do tell me some more of science. I adore it
    already.
    
    _I_. Do you, dear? Well, I almost forgot about differentiation. I am
    really and truly positively in love with differentiation. It's different
    from molecules and protoplasms, but it's every bit as nice. And our
    professor! You should hear him enthuse about it; he's perfectly bound up
    in it. This is a differentiation scarf--they've just come out. All
    the girls wear them--just on account of the interest we take in
    differentiation.
    
    _L_. What is it, anyway?
    
    _I_. Mull trimmed with Languedoc lace, but--
    
    _L_. I don't mean that--the other.
    
    _I_. Oh, differentiation! That's just sweet. It's got something to
    do with species. And we learn all about ascidians, too. They are the
    divinest things! If I only had an ascidian of my own! I wouldn't ask
    anything else in the world.
    
    _L_. What do they look like, dear? Did you ever see one?
    
    _I_. Oh, no; nobody ever did but the poor dear professors; but they're
    something like an oyster with a reticule hung on its belt. I think they
    are just _too_ lovely for anything.
    
    _L_. Did you learn anything else besides?
    
    _I_. Oh, yes. We studied common philosophy, and logic, and metaphysics,
    and a lot of those ordinary things, but the girls didn't care anything
    about those. We were just in ecstasies over differentiations, and
    molecules, and the professor, and protoplasms, and ascidians. I don't
    see why they put in those common branches; we couldn't hardly endure
    them.
    
    _L_. (_Sighs_.) Do you believe they'll have a course like that next
    year?
    
    _I_. I think may be they will.
    
    _L_. Dear me! There's the bell to dress for dinner. How I wish I could
    study those lovely things!
    
    _I_. You must ask your father if you can't spend the winter in Boston
    with me. I'm sure there'll be another course of Parlor Philosophy next
    winter. But how dreadful that we must stop talking about it now to dress
    for dinner! You are going to have company, you said; what shall you
    wear, dear?
    
    _L_. Oh, almost anything. What shall you?
    
    (_Exeunt arm in arm_.)
    
           *       *       *       *       *
    
    
    
    
    THE PROPOSED DUTCH INTERNATIONAL COLONIAL AND GENERAL EXPORT EXHIBITION.
    
    
    The Amsterdam International Exhibition, the opening of which has been
    fixed for May 1, 1883, is now in way of realization. This exhibition
    will present a special interest to all nations, and particularly to
    their export trade. Holland, which is one of the great colonial powers,
    proposes by means of this affair to organize a competition between the
    various colonizing nations, and to contribute thus to a knowledge of
    the resources of foreign countries whose richness of soil is their
    fundamental power.
    
    The executive committee includes the names of some of the most prominent
    persons of the Netherlands: M. Cordes, president; M. de Clercq,
    delegate; M. Kappeyne van di Coppello, secretary; and M. Agostini,
    commissary general.
    
    [Illustration: PLAN OF THE DUTCH INTERNATIONAL EXHIBITION.
    
       1. Exhibition Palace.
       2. Netherlands Colonial Exhibition.
       3. Fine Arts.
       4. Annexes for Agricultural Machines, etc.
       5. Machines, Materials, etc.
       6. Concert Theater.
       7. Panorama.
       8. Jury Pavilion.
       9. Royal Pavilion.
      10. Committee Pavilion.
      11. International Society's Pavilion.
      12. Restaurant and Café.
      13. Music Kiosque and Electric Pharos.
      14. German Restaurant.
      15. Dutch Restaurant.
      16. English Restaurant.
      17. French Restaurant.
      18. Aquarium and Rockwork.
    ]
    
    The exhibition will consist of five great divisions, to wit: 1. A
    Colonial exhibition. 2. A General Export exhibition. 3. A Retrospective
    exhibition of Fine Arts and of Arts applied to the Industries. 4.
    Special exhibitions. 5. Lectures and Scientific Reunions.
    
    The colonial part forms the base of the exhibition, and will be devoted
    to a comparative study of the different systems of colonization
    and colonial agriculture, as well as of the manners and customs of
    ultramarine peoples. In giving an exact idea of what has been done, it
    will indicate what remains to be done from the standpoint of a general
    development of commerce and manufactures. Such is the programme of the
    first division.
    
    The second division will include everything that relates to the export
    trade.
    
    The third division will be reserved for works of art dating back from
    the most remote ages.
    
    The fourth division will be devoted to temporary exhibitions, such as
    those of horticultural and agricultural products, etc.
    
    The fifth division will constitute the intellectual part, so to speak,
    of the exhibition. It will be devoted to lectures, and to scientific
    meetings for the discussion of questions relating to teaching, to the
    arts, to the sciences, to hygiene, to international jurisprudence, and
    to political economy. Questions of colonial economy will naturally
    occupy the first rank.
    
    As will be seen, the programme of this grand scheme organized by the
    Netherlands government is a broad one; and, owing the experience
    acquired in recent universal exhibitions, especially that of Paris in
    1878, very happy results may be expected from it.
    
    At present, we give an illustration showing the general plan of the
    exhibition. In future, in measure as the work proceeds, we shall be able
    to give further details.--_Le Genie Civil_.
    
           *       *       *       *       *
    
    
    
    
    NEW METHOD OF DETECTING DYES ON YARNS AND TISSUES.
    
    By JULES JOFFRE.
    
    
    The reagents employed are a solution of caustic potassa in ten parts
    of water; hydrochloric acid diluted with an equal bulk of water, or
    occasionally concentrated; nitric acid, ammonia, ferric sulphate, and
    a concentrated solution of tin crystals. The most convenient method of
    operating is to steep small portions of the cloth under examination in a
    little of the reagent placed at the bottom of a porcelain capsule. The
    bits are then laid on the edge of the capsule, when the changes of color
    which they have undergone may be conveniently observed. It is useful to
    submit to the same reagents simultaneously portions of cloth dyed in a
    known manner with the wares which are suspected of having been used in
    dyeing the goods under examination.
    
    
    RED COLORS.
    
    By the action of caustic potassa, the reds are divided into four groups:
    1, those which turn to a violet or blue; 2, those which turn brown;
    3, those which are changed to a light yellow or gray; 4, those which
    undergo little or no change.
    
    The first group comprises madder, cochineal, orchil, alkanet, and
    murexide. Madder reds are turned to an orange by hydrochloric acid,
    while the three next are not notably affected. Cochineal is turned by
    the potassa to a violet-red, orchil to a violet-blue, and alkanet to a
    decided blue. Lac-dye presents the same reactions as cochineal, but
    has less brightness. Ammoniacal cochineal and carmine may likewise be
    distinguished by the tone of the reds obtained.
    
    A characteristic of madder reds is that, after having been turned yellow
    by hydrochloric acid, they are rendered violet on treatment with milk
    of lime. A boiling soap-lye restores the original red, though somewhat
    paler. Artificial alizarine gives the same reaction. Turkey-reds,
    however, are quite unaffected by acid. Garancine and garanceux reds, if
    treated first with hydrochloric acid and then with milk of lime, turn to
    a dull blue.
    
    Madder dyes are sometimes slow in being turned to a violet by potassa,
    and this shade when produced is often brownish. They might thus be
    confounded with the dyes of the fourth group, i.e., rosolic acid,
    coralline, eosine, and coccine. None of these colors gives the
    characteristic reaction with milk of lime and boiling soap-lye. If
    plunged in milk of lime, they resume their rose or orange shades, while
    the madder colors become violet. Murexide is turned, by potassa, gray
    in its light shades and violet in its dark ones. It might, then, be
    confounded with orchil, but it is decolorized by hydrochloric acid,
    which leaves orchil a red. Moreover, it is turned greenish by stannous
    chloride.
    
    A special character of this dye (murexide) is the presence of mercury,
    the salts of which serve as mordants for fixing it, and may be detected
    by the ordinary reagents.
    
    The second group comprises merely sandal wood or sanders red, which
    turns to a brown. On boiling it with copperas it becomes violet, while
    on boiling with potassium dichromate it changes to a yellowish brown.
    
    The third group includes safflower, magenta, and murexide (light
    shades). If the action of the potassa is prolonged the (soft) red woods
    enter into this group. Safflower turns yellow by the action of potassa,
    and the original rose shade is not restored by washing with water.
    Hydrochloric acid turns it immediately yellow. Citric acid has no
    action. Magenta is completely decolorized by potassa, but a prolonged
    washing in water reproduces the original shade. This reaction is common
    to many aniline colors. These decolorations and recolorations are easily
    produced in dark shades, while in very light shades they are less easily
    observed, because there is always a certain loss of color. Stannous
    chloride turns magenta reds to a violet. Hydrochloric acid renders them
    yellowish brown (afterward greenish?). Water restores the purple red
    shade.
    
    The fourth group comprises saffranine, azo-dinaphthyldiamine, rosolic
    acid, coralline, pure eosine and cosine modified by a salt of lead,
    coccina, artificial ponceau, and red-wood.
    
    Saffranine is detected by the action of hydrochloric acid, which turns
    it to a beautiful blue; the red color is restored by washing in water.
    Azo-dinaphthyl diamine is recognized by its peculiar orange cast, and is
    turned by hydrochloric acid to a dull, dirty violet. Rosolic acid and
    coralline, as well as eosine, are turned by hydrochloric acid to an
    orange-yellow: the two former are distinguished from eosine by their
    shade, which inclines to a yellow. Potassa turns rosolic acid and
    coralline from an orange-red to a bright red, while it produces no
    change in eosine. If the action of potassa is prolonged, modified eosine
    is blackened in consequence of the decomposition of the wool, the
    sulphur of which forms lead sulphide. Coccine becomes of a light
    lemon-yellow on treatment with hydrochloric acid. Washing with water
    restores the original shade. It affords the same reactions as eosine,
    but its tone is more inclined to an orange.
    
    Artificial ponceau does not undergo any change on treatment with
    hydrochloric acid, and resists potash. Red wood shades are turned toward
    a gooseberry-red by hydrochloric acid, especially if strong. This last
    reaction not being very distinct, red-wood shades might be mistaken
    for those of artificial ponceau but for the superior brightness of the
    latter. If the action of potassa is prolonged, the red-wood shades
    are decolorized, and a washing with water then bleaches the tissue.
    Rocelline affords the same reactions as artificial ponceau, but if
    steeped in a concentrated solution of stannous chloride it is in time
    completely discharged, which is not the case with artificial ponceau.
    
    
    VIOLET COLORS.
    
    Violets are divided into two groups: those affected by potassa, and
    those upon which it has no action. The first group embraces logwood,
    orchil, alkanet, and aniline violets, including under the latter term
    Perkin's violet, (probably the original "mauve"), dahlia, Parme or
    magenta violet, methyl, and Hofmann's violets. The action of potassa
    gives indications for each of these violets. Logwood violet is browned;
    that of orchil, if slightly reddish, is turned to a blue-violet; that of
    alkanet is modified to a fine blue. Lastly, Perkin's mauve, dahlia, and
    methyl violet become of a grayish brown, which may be re-converted into
    a fine violet by washing in abundance of water. When the shades are
    very heavy, this grayish brown is almost of a violet-brown, so that the
    violets might seem to be unaltered.
    
    The action of hydrochloric acid distinguishes these colors better still
    if the aid of ammonia is called in for two cases.
    
    The acid turns logwood violet to a fine red, and equally reddens orchil
    violet. But the two colors cannot be confounded, first, because the two
    violet shades are very distinct, that of orchil being much the brighter;
    and secondly, because ammonia has no action on logwood violet, while it
    turns orchil violet, if at all reddish, to a blue shade. Hydrochloric
    acid, whether dilute or concentrated, is without action on alkanet
    violet. If the acid is dilute, it is equally without action on Perkin's
    violet and dahlia. If it is strong, it turns them blue, and even green
    if in excess. Hofmann's violet turns green even with dilute acid, but
    prolonged washing restores the original violet shade. Dahlia gives a
    more blue shade than Perkin's mauve. The action of acid is equally
    characteristic for methyl violet. It becomes green, then yellow. Washing
    in water re-converts it first to a green, and then to a violet.
    
    The second group includes madder violet, cochineal violet, and the
    compound violet of cochineal and extract of indigo. These three dyes are
    thus distinguished: Hydrochloric acid turns the madder violet-orange,
    slightly brownish, or a light brown, and it affords the characteristic
    reaction of the madder colors described above under reds. Cochineal
    violets are reddened. Sometimes they are decolorized, and become finally
    yellow, but do not pass through a brown stage.
    
    The compound violet of cochineal and extract of indigo presents this
    characteristic reaction, that if boiled with very weak solution of
    sodium carbonate the liquid becomes blue, rather greenish, while the
    cloth becomes a vinous-red--_Moniteur Scientifique.--Chem. News._
    
           *       *       *       *       *
    
    
    
    
    CHEVALET'S CONDENSO-PURIFIER FOR GAS.
    
    
    The condenso-purifier shown in the accompanying cut operates as
    follows: Water is caused to flow over a metallic plate perforated with
    innumerable holes of from one to three millimeters in diameter, and
    then, under this disk, which is exactly horizontal, a current of gas is
    introduced. Under these circumstances the liquid does not traverse the
    holes in the plate, but is supported by the gas coming in an opposite
    direction. Provided that the gas has sufficient pressure, it bubbles up
    through the water and becomes so much the more divided in proportion as
    the holes are smaller and more numerous.
    
    The gas is washed by traversing the liquid, and freed from the tar and
    coal-dust carried along with it; while, at the same time, the ammonia
    that it contains dissolves in the water, and this, too, so much the
    better the colder the latter is. This apparatus, then, permits of
    obtaining two results: a mechanical one, consisting in the stoppage of
    the solid matters, and a chemical one, consisting in the stoppage of the
    soluble portions, such as ammonia, sulphureted hydrogen, and carbonic
    acid.
    
    [Illustration: FIG. 1.--CONDENSO-PURIFIER FOR GAS. (Elevation.)]
    
    The condenso-purifier consists of three perforated diaphragms, placed
    one over the other in rectilinear cast-iron boxes. These diaphragms are
    movable, and slide on projections running round the interior of the
    boxes. In each of the latter there is an overflow pipe, g, that runs to
    the box or compartment below, and an unperforated plate, f, that slides
    over the diaphragm so as to cover or uncover as many of the holes as may
    be necessary. A stream of common water runs in through the funnel, e,
    over the upper diaphragm, while the gas enters the apparatus through the
    pipe, a, and afterward takes the direction shown by the arrows.
    Reaching the level of the overflow, the water escapes, fills the lower
    compartment, covers the middle diaphragm, then passes through the second
    overflow-pipe to cover the lower diaphragm, next runs through the
    overflow-pipe of the third diaphragm on to the bottom of the purifier,
    and lastly makes its exit, through a siphon. A pressure gauge, having an
    inlet for the gas above and below, serves for regulating the pressure
    absorbed for each diaphragm, and which should vary between 0.01 and
    0.012 of a meter.
    
    The effect of this purifier is visible when the operation is performed
    with an apparatus made externally of glass. The gas is observed to enter
    in the form of smoke under the first diaphragm, and the water to become
    discolored and tarry. When the gas traverses the second diaphragm, it is
    observed to issue from the water entirely colorless, while the latter
    becomes slightly discolored, and finally, when it traverses the third
    diaphragm, the water is left perfectly limpid.
    
    Two diaphragms have been found sufficient to completely remove the solid
    particles carried along by the gas, the third producing only a chemical
    effect.
    
    This apparatus may replace two of the systems employed in gas works: (1)
    mechanical condensers, such as the systems of Pelouze & Audouin, and
    of Servier; and (2) scrubbers of different kinds and coke columns.
    Nevertheless, it is well to retain the last named, if the gas works have
    them, but to modify their work.
    
    [Illustration: FIG. 2.--PLAN VIEW WITH BY-PASS.]
    
    This purifier should always be placed directly after the condensers, and
    is to be supplied with a stream of pure water at the rate of 50 liters
    of water per 1,000 cubic meters of gas. Such water passes only once into
    the purifier, and issues therefrom sufficiently rich in ammonia to be
    treated.
    
    If there are coke columns in the works, they are placed after the
    purifier, filled with wood shavings or well washed gravel, and then
    supplied with pure cold water in the proportion stated above. The water
    that flows from the columns passes afterward into the condenso-purifier,
    where it becomes charged with ammonia, and removes from the gas the tar
    that the latter has carried along, and then makes its exit and goes to
    the decanting cistern.
    
    In operating thus, all the remaining ammonia that might have escaped the
    condenso-purifier is removed, and the result is obtained without pumps
    or motor, with apparatus that costs but little and does not occupy much
    space. The advantages that are derived from this, as regards sulphate
    of ammonia, are important; for, on treating ammoniacal waters with
    condensers, scarcely more than four to five kilogrammes of the sulphate
    are obtained per ton of coal distilled, while by washing the gas
    perfectly with the small quantity of water indicated, four to five
    kilogrammes more can be got per 1,000 kilogrammes of coal, or a total of
    eight to ten kilogrammes per ton.
    
    When the gas is not washed sufficiently, almost all of the ammonia
    condenses in the purifying material.
    
    The pressure absorbed by the condenso purifier is from ten to twelve
    millimeters per washing-diaphragm. In works that are not provided with
    an extractor, two diaphragms, or even a single one, are employed when it
    is desired simply to catch the tar.
    
    The apparatus under consideration was employed in the St. Quentin
    gas works during the winter of 1881-1882, without giving rise to any
    obstruction; and, besides, it was found that by its use there might be
    avoided all choking up of the pipes at the works and the city mains
    through naphthaline.
    
    In cases of obstruction, it is very easy to take out the perforated
    diaphragms; this being done by removing the bolts from the piece that
    holds the register, f, and then removing the diaphragm and putting in
    another. This operation takes about ten minutes. The advantages of such
    a mounting of the diaphragms is that it allows the gas manufacturer to
    employ (and easily change) the number of perforations that he finds best
    suited to his needs.
    
    These apparatus are constructed for productions of from 1,000 to 100,000
    cubic meters of gas per twenty four hours. They have been applied
    advantageously in the washing of smoke from potassa furnaces, in order
    to collect the ammonia that escapes from the chimneys. In one of such
    applications, the quantity of gas and steam washed reached a million
    cubic meters per twenty-four hours.--_Revue Industrielle._
    
           *       *       *       *       *
    
    
    
    
    ARTIFICIAL IVORY.
    
    
    It is said that artificial ivory of a pure white color and very durable
    has been manufactured by dissolving shellac in ammonia, mixing the
    solution with oxide of zinc, driving off ammonia by heating, powdering,
    and strongly compressing in moulds.
    
           *       *       *       *       *
    
    
    
    
    CREOSOTE IMPURITIES.
    
    [Footnote: Read at the meeting of the American Pharmaceutical
    Association held at Niagara Falls. 1882.]
    
    By Prof. P. W. BEDFORD.
    
    
    The object of this query can be but one, namely, to inquire whether the
    wood creosote offered for sale is a pure article, or not; and if not,
    what is the impurity present?
    
    The relative commercial value of the articles sold as coal tar creosote
    and wood creosote disposes of the question as to the latter being
    present in the former article, and we are quite certain that the cheap
    variety is nothing more or less than a phenol or carbolic acid. Wood
    creosote, it has been frequently stated, is adulterated with coal tar
    creosote, or phenol. The object of my experiments has been to prove the
    identity of wood creosote and its freedom from phenol. The following
    tests are laid down in various works as conclusive evidence of its
    purity, and each has been fully tried with the several samples of wood
    creosote to prove their identity and purity, and also with phenol, sold
    as commercial creosote or coal tar creosote, and for comparison with
    mixtures of the two, that even small percentages of admixture might be
    identified, should such exist in the wood creosote of the market.
    
    The following tests were used:
    
    1. Equal volumes of anhydrous glycerine and wood creosote make a turbid
    mixture, separating on standing. _Phenol dissolves_. If three volumes
    of water be added, the separation of the wood creosote is immediate.
    _Phenol remains in permanent solution_.
    
    2. One volume of wood creosote added to two volumes of glycerine; the
    former is not dissolved, but separates on standing. _Phenol dissolves_.
    
    3. Three parts of a mixture containing 75 per cent, of glycerine and
    25 of water to 1 part of wood creosote show no increase of volume of
    glycerine, and wood creosote separates. _Phenol dissolves, and forms
    a clear mixture_. Were any phenol present in the wood creosote, the
    increase in the volume of the glycerine solution, if in a graduated
    tube, would distinctly indicate the percentage of phenol present.
    
    4. Solubility in benzine. Wood creosote entirely soluble. _Phenol is
    insoluble_.
    
    5. A 1 per cent, solution of wood creosote. Take of this 10 cubic
    centimeters, add 1 drop of a test solution of ferric chloride; an
    evanescent blue color is formed, passing quickly into a red color.
    _Phenol gives a permanent blue color_.
    
    6. Collodion or albumen with an equal bulk of wood creosote makes a
    perfect mixture without coagulation. _Phenol at once coagulates into a
    more or less firm mass or clot_.
    
    7. Bromine solution with wood creosote gives a reddish brown
    precipitate. _Phenol gives a white precipitate_.
    
    All tests enumerated above were repeatedly tried with four samples of
    wood creosote sold as such; one a sample of Morson's, one of Merck's,
    one evidently of German origin, but bearing the label and capsule of an
    American manufacturer, and one of unknown origin, but sold as beech-wood
    creosote (German), and each proved to be _pure wood creosote_.
    
    Two samples of commercial creosote which, from the low cost, were known
    to be of coal tar origin gave the negative tests, showing that they were
    phenol.
    
    Corroborative experiments were made by mixing 10 to 20 per cent, of
    phenol with samples of the beechwood creosote, but in every case each of
    the tests named showed the presence of the phenol.
    
    The writer on other occasions applied single tests (the collodion test)
    to samples of beechwood creosote that he had an opportunity of procuring
    small specimens of, and satisfied himself that they were pure. The
    conclusion is that the wood creosote of the market of the present time
    is in abundant supply, is of unexceptionable quality, and reasonable in
    price, so that there is no excuse for the substitution of the phenol
    commonly sold for it. When it is directed for use for internal
    administration (the medicinal effect being entirely dissimilar), wood
    creosote only should be dispensed.
    
    The general sales of creosote by the pharmacist are in small quantities
    as a toothache remedy, and phenol has the power of coagulating albumen,
    which effectually relieves the suffering. Wood creosote does not
    coagulate albumen, and is, therefore, not as serviceable. This is,
    perhaps, the reason that it has become, in a great measure, supplanted
    in general sale by the coal tar creosote, to say nothing of the argument
    of a lower cost.
    
           *       *       *       *       *
    
    
    
    
    REMEDY FOR SICK HEADACHE.
    
    
    Surgeon Major Roehring, of Amberg, reports, in No. 32 of the _Allg. Med.
    Centr. Zeit_., April 22, 1882, a case of headache of long standing,
    which he cured by salicylate of sodium, which confirms the observations
    of Dr. Oehlschlager, of Dantzig, who first contended that we possessed
    in salicylic acid one of the most reliable remedies for neuralgia. This
    cannot astonish us if we remember that the action of salicylic acid is,
    in more than one respect, and especially in its influence on the nervous
    centers, analogous to quinine.
    
    While out with the troops on maneuver, Dr. Roehring was called to visit
    the sixteen-year old son of a poor peasant family in a neighboring
    village. The boy, who gave all evidences of living under bad hygienic
    surroundings, but who had shown himself very diligent at school, had
    been suffering, from his sixth year, several days every week from the
    most intense headache, which had not been relieved by any of the many
    remedies tried for this purpose. A careful examination did not reveal
    any organic lesion or any cause for the pain, which seemed to be
    neuralgic in character, a purely nervous headache. Roehring had just
    been reading the observations of Oehlschlager, and knowing, from the
    names of the physicians who had been already attending the poor boy,
    that all the common remedies for neuralgia had been given a fair trial,
    thought this a good opportunity to test the virtue of salicylate of
    sodium. He gave the boy, who, in consequence of the severity of the
    pain, was not able to leave his bed, ten grains of the remedy every
    three hours, and was surprised to see the patient next day in his tent
    and with smiling face. The boy admitted that he for years had not been
    feeling so well as he did then. The remedy was continued, but in less
    frequent doses, for a few days longer; the headache did not return.
    Several months later Dr. Roehring wrote to the school-teacher of the
    boy, and was informed that the latter had, during all this time,
    been totally free of his former pain, that he was much brighter than
    formerly, and evidently enjoying the best of health.
    
    It may be worth while to give the remedy a more extensive trial, and the
    more so as we are only too often at a loss what to do in stubborn cases
    of so-called nervous headache.--_The Medical and Surgical Reporter_.
    
           *       *       *       *       *
    
    
    
    
    SUNLIGHT AND SKYLIGHT AT HIGH ALTITUDES.
    
    
    At the Southampton meeting of the British Association, Captain Abney
    read a paper in which he called attention to the fact that photographs
    taken at high altitudes show skies that are nearly black by comparison
    with bright objects projected against them, and he went on to show that
    the higher above the sea level the observer went, the darker the sky
    really is and the fainter the spectrum. In fact, the latter shows but
    little more than a band in the violet and ultraviolet at a height of
    8,500 feet, while at sea-level it shows nearly the whole photographic
    spectrum. The only reason of this must be particles of some reflecting
    matter from which sunlight is reflected. The author refers this to
    watery stuff, of which nine-tenths is left behind at the altitude at
    which be worked. He then showed that the brightness of the ultra-violet
    of direct sunlight increased enormously the higher the observer went,
    but only to a certain point, for the spectrum suddenly terminated about
    2,940 wave-length. This abrupt absorption was due to extra-atmospheric
    causes and perhaps to space. The increase in brightness of the
    ultra-violet was such that the usually invisible rays, L, M, N, could be
    distinctly seen, showing that the visibility of these rays depended
    on the intensity of the radiation. The red and ultra-red part of the
    spectrum was also considered. He showed that the absorption lines were
    present in undiminished force and number at this high altitude, thus
    placing their origin to extra-atmospheric causes. The absorption from
    atmospheric causes of radiant enemy in these parts he showed was due
    to "water-stuff," which he hesitated to call aqueous vapor, since the
    banded spectrum of water was present, and not lines. The B and A line he
    also stated could not be claimed as telluric lines, much less as due to
    aqueous vapor, but must originate between the sun and our atmosphere.
    The author finally confirmed the presence of benzine and ethyl in the
    same region. He had found their presence indicated in the spectrum at
    sea-level, and found their absorption lines with undiminished intensity
    at 8,500 feet. Thus, without much doubt, hydrocarbons must exist between
    our atmosphere and the sun, and, it may be, in space.
    
    Prof. Langley, following Capt. Abney, observed: The very remarkable
    paper just read by Captain Abney has already brought information
    upon some points which the one I am about, by the courtesy of the
    Association, to present, leaves in doubt. It will be understood then
    that the references here are to his published memoirs only, and not to
    what we have just heard.
    
    The solar spectrum is so commonly composed to have been mapped with
    completeness, that the statement that much more than one-half its extent
    is not only unmapped but nearly unknown, may excite surprise. This
    statement is, however, I think, quite within the truth, as to that
    almost unexplored region discovered by the elder Herschel, which, lying
    below the red and invisible to the eye, is so compressed by the prism
    that, though its aggregate heat effects have been studied through the
    thermopile, it is only by the recent researches of Capt. Abney that we
    have any certain knowledge of the lines of absorption there, even in
    part. Though the last-named investigator has extended our knowledge of
    it to a point much beyond the lowest visible ray, there yet remains a
    still remoter region, more extensive than the whole visible spectrum,
    the study of which has been entered on at Alleghany, by means of the
    linear bolometer.
    
    The whole spectrum, visible and invisible, is powerfully affected by the
    selective absorption of our atmosphere and that of the sun; and we must
    first observe that could we get outside our earth's atmospheric shell,
    we should see a second and very different spectrum, and could we
    afterward remove the solar atmosphere also, we should have yet a third,
    different from either. The charts exhibited show:
    
    1st. The distribution of the solar energy as we receive it, at the
    earth's surface, throughout the entire invisible as well as visible
    portion, both on the prismatic and normal scales. This is what I have
    principally to speak of now, but this whole first research is but
    incidental to others upon the spectra before any absorption, which
    though incomplete, I wish to briefly allude to later. The other curves
    then indicate:
    
    2d. The distribution of energy before absorption by our own atmosphere.
    
    3d. This distribution at the photosphere of the sun. The extent of
    the field, newly studied, is shown by this drawing [chart exhibited].
    Between H in the extreme violet, and A in the furthest red, lies the
    visible spectrum, with which we are familiar, its length being about
    4,000 of Angstrom's units. If, then, 4,000 represent the length of the
    visible spectrum, the chart shows that the region below extends through
    24,000 more, and so much of this as lies below wave-length 12,000, I
    think, is now mapped for the first time.
    
    [Illustration: FIG. 1.--PRISMATIC SPECTRUM.]
    
    We have to pi = 12,000 relatively complete photographs, published by
    Capt. Abney, but, except some very slight indications by Lamansky,
    Desains, and Mouton, no further guide.
    
    Deviations being proportionate to abscissae, and measured solar energies
    to ordinates, we have here (1) the distribution of energy in the
    prismatic, and (2) its distribution in the normal spectrum. The total
    energy is in each case proportionate to the area of the curve (the two
    very dissimilar curves inclosing the same area), and on each, if the
    total energy be roughly divided into four parts, one of these will
    correspond to the visible, and three to the invisible or ultra-red part.
    The total energy at the ultra violet end is so small, then, as to be
    here altogether negligible.
    
    We observe that (owing to the distortion introduced by the prism) the
    maximum ordinate representing the heat in the prismatic spectrum is, as
    observed by Tyndall, below the red, while upon the normal scale this
    maximum ordinate is found in the orange.
    
    I would next ask your attention to the fact that in either spectrum,
    below pi = 12,000 are most extraordinary depressions and interruptions
    of the energy, to which, as will be seen, the visible spectrum offers
    no parallel. As to the agent producing these great gaps, which so
    strikingly interrupt the continuity of the curve, and, as you see,
    in one place, cut it completely into two, I have as yet obtained no
    conclusive evidence. Knowing the great absorption of water vapor in this
    lowest region, as we already do, from the observations of Tyndall, it
    would, _a priori_, seem not unreasonable to look to it as the cause. On
    the other hand, when I have continued observations from noon to sunset,
    making successive measures of each ordinate, as the sinking sun sent its
    rays through greater depths of absorbing atmosphere, I have not found
    these gaps increasing as much as they apparently should, if due to a
    terrestrial cause, and so far as this evidence goes, they might be
    rather thought to be solar. But my own means of investigation are not so
    well adapted to decide this important point as those of photography, to
    which we may yet be indebted for our final conclusion.
    
    [Illustration: FIG. 2.--NORMAL SPECTRUM. (At sea level.)]
    
    I am led, from a study of Capt. Abney's photographs of the region
    between pi = 8,000 and pi = 12,000, to think that these gaps are
    produced by the aggregation of finer lines, which can best be
    discriminated by the camera, an instrument which, where it can be used
    at all, is far more sensitive than the bolometer; while the latter, I
    think, has on the other hand some advantage in affording direct and
    trustworthy measures of the amount of energy inhering in each ray.
    
    One reason why the extent of this great region has been so singularly
    underestimated, is the deceptively small space into which it appears to
    be compressed by the distortion of the prism. To discriminate between
    these crowded rays, I have been driven to the invention of a special
    instrument. The bolometer, which I have here, is an instrument depending
    upon principles which I need not explain at length, since all present
    may be presumed to be familiar with the success which has before
    attended their application in another field in the hands of the
    President of this Association.
    
    I may remark, however, that this special construction has involved very
    considerable difficulties and long labor. For the instrument here shown,
    platinum has been rolled by Messrs. Tiffany, of New York, into sheets,
    which, as determined by the kindness of Professor Rood, reach the
    surprising tenuity of less than one twenty-five-thousandth of an English
    inch (I have also iron rolled to one fifteen-thousandth inch), and from
    this platinum a strip is cut one one-hundred-and-twenty-fifth of an inch
    wide. This minute strip, forming one arm of a Wheatstone's bridge, and
    thus perfectly shielded from air currents, is accurately centered by
    means of a compound microscope in this truly turned cylinder, and the
    cylinder itself is exactly directed by the arms of this Y.
    
    The attached galvanometer responds readily to changes of temperature, of
    much less than one-ten-thousandth degree F. Since it is one and the same
    solar energy whose manifestations we call "light" or "heat," according
    to the medium which interprets them, what is "light" to the eye is
    "heat" to the bolometer, and what is seen as a dark line by the eye is
    felt as a cold line by the sentient instrument. Accordingly, if lines
    analogous to the dark "Fraunhofer lines" exist in this invisible region,
    they will appear (if I may so speak) to the bolometer as cold bands, and
    this hair-like strip of platina is moved along in the invisible part of
    the spectrum till the galvanometer indicates the all but infinitesimal
    change of temperature caused by its contact with such a "cold band." The
    whole work, it will be seen, is necessarily very slow; it is in fact a
    long groping in the dark, and it demands extreme patience. A portion of
    its results are now before you.
    
    The most tedious part of the whole process has been the determination of
    the wave-lengths. It will be remembered that we have (except through the
    work of Capt. Abney already cited, and perhaps of M. Mouton) no direct
    knowledge of the wave-lengths in the infra-red prismatic spectrum, but
    have hitherto inferred them from formulas like the well-known one of
    Cauchy's, all which known to me appear to be here found erroneous by the
    test of direct experiment, at least in the case of the prism actually
    employed.
    
    I have been greatly aided in this part of the work by the remarkable
    concave gratings lately constructed by Prof. Rowland, of Baltimore, one
    of which I have the pleasure of showing you. [Instrument exhibited.]
    
    The spectra formed by this fall upon a screen in which is a fine slit,
    only permitting nearly homogeneous rays to pass, and these, which may
    contain the rays of as many as four overlapping spectra, are next passed
    through a rock-salt or glass prism placed with its refracting edge
    parallel to the grating lines. This sorts out the different narrow
    spectral images, without danger of overlapping, and after their passage
    through the prism we find them again, and fix their position by means of
    the bolometer, which for this purpose is attached to a special kind of
    spectrometer, where its platinum thread replaces the reticule of the
    ordinary telescope. This is very difficult work, especially in the
    lowermost spectrum, where I have spent over two weeks of consecutive
    labor in fixing a single wave-length.
    
    The final result is, I think, worth, the trouble, however, for, as you
    see here, we are now able to fix with approximate precision and by
    direct experiment, the wave-length of every prismatic spectral ray. The
    terminal ray of the solar spectrum, whose presence has been certainly
    felt by the bolometer, has a wave-length of about 28,000 (or is nearly
    two octaves below the "great A" of Fraunhofer).
    
    So far, it appears only that we have been measuring _heat_, but I
    have called the curve that of solar "energy," because by a series of
    independent investigations, not here given, the selective absorption
    of the silver, the speculum-metal, the glass, and the lamp-black
    (the latter used on the bolometer-strip), forming the agents of
    investigation, has been separately allowed for. My study of lamp-black
    absorption, I should add in qualification, is not quite complete. I have
    found it quite transparent to certain infra-red rays, and it is very
    possible that there may be some faint radiations yet to be discovered
    even below those here indicated.
    
    In view of the increased attention that is doubtless soon to be given
    to this most interesting but strangely neglected region, and which by
    photography and other methods is certain to be fully mapped hereafter, I
    can but consider this present work less as a survey than as a sketch of
    this great new field, and it is as such only that I here present it.
    
    All that has preceded is subordinate to the main research, on which I
    have occupied the past two years at Alleghany, in comparing the spectra
    of the sun at high and low altitudes, but which I must here touch upon
    briefly. By the generosity of a friend of the Alleghany Observatory, and
    by the aid of Gen. Hazen, Chief Signal Officer of the U S. Army, I was
    enabled last year to organize an expedition to Mount Whitney in South
    California, where the most important of these latter observations were
    repeated at an altitude of 13,000 feet. Upon my return I made a special
    investigation upon the selective absorption of the sun's atmosphere,
    with results which I can now only allude to.
    
    By such observations, but by methods too elaborate for present
    description, we can pass from the curve of energy actually observed to
    that which would be seen if the observer were stationed wholly above the
    earth's atmosphere, and freed from the effect of its absorption.
    
    The salient and remarkable result is the growth of the blue end of the
    spectrum, and I would remark that, while it has been long known from
    the researches of Lockyer, Crova, and others that certain rays of short
    wave-length were more absorbed than those of long, these charts show
    _how much_ separate each ray of the spectrum has grown, and bring, what
    seems to me, conclusive evidence of the shifting of the point of maximum
    energy without the atmosphere toward the blue. Contrary to the accepted
    belief, it appears here also that the absorption on the whole grows less
    and less, to the extreme infra-red extremity; and on the other hand,
    that the energy before absorption was so enormously greater in the blue
    and violet, that the sun must have a decidedly bluish tint to the naked
    eye, if we could rise above the earth's atmosphere to view it.
    
    But even were we placed outside the earth's atmosphere, that surrounding
    the sun itself would still remain, and exert absorption. By special
    methods, not here detailed, we have at Alleghany compared the
    absorption, at various depths, of the sun's own atmosphere for each
    spectral ray, and are hence enabled to show, with approximate truth, I
    think for the first time, the original distribution of energy throughout
    the visible and invisible spectrum at the fount of that energy, in the
    sun itself. There is a surprising similarity, you will notice, in the
    character of the solar and telluric absorptions, and one which we could
    hardly have anticipated _a priori_.
    
    Here, too, violet has been absorbed enormously more than the green, and
    the green than the red, and so on, the difference being so great, that
    if we were to calculate the thickness of the solar atmosphere on the
    hypothesis of a uniform transmission, we should obtain a very thick
    atmosphere from the rate of absorption in the infra-red alone, and a
    very thin one from that in the violet alone.
    
    But the main result seems to be still this, that as we have seen in the
    earth's atmosphere, so we see in the sun's, an enormous and progressive
    increase of the energy toward the shorter wave-lengths. This conclusion,
    which, I may be permitted to remark, I anticipated in a communication
    published in the _Comptes Rendus_ of the Institute of France as long
    since as 1875, is now fully confirmed, and I may mention that it is so
    also by direct photometric methods, not here given.
    
    If, then, we ask how the solar photosphere would appear to the eye,
    could we see it without absorption, these figures appear to show
    conclusively that it would be _blue_. Not to rely on any assumption,
    however, we have, by various methods at Allegheny, reproduced this
    color.
    
    Thus (to indicate roughly the principle used), taking three Maxwell's
    disks, a red, green, and blue, so as to reproduce white, we note the
    three corresponding ordinates at the earth's surface spectrum, and,
    comparing these with the same ordinates in the curve giving the energy
    at the solar surface, we rearrange the disks, so as to give the
    proportion of red, green, and blue which would be seen _there_, and
    obtain by their revolution a tint which must approximately represent
    that at the photosphere, and which is most similar to that of a blue
    near Fraunhofer's "F."
    
    The conclusion, then, is that, while all radiations emanate from the
    solar surface, including red and infra-red, in greater degree than we
    receive them, the blue end is so enormously greater in proportion that
    the proper color of the sun, as seen at the photosphere is blue--not
    only "bluish," but positively and distinctly blue; a statement which I
    have not ventured to make from any conjecture, or on any less cause than
    on the sole ground of long continued experiments, which, commenced some
    seven years since, have within the past two years irresistibly tended to
    the present conclusion.
    
    The mass of observations on which it rests must be reserved for more
    detailed publication elsewhere. At present, I can only thank the
    association for the courtesy which has given me the much prized
    opportunity of laying before them this indication of methods and
    results.
    
           *       *       *       *       *
    
    
    
    
    THE MINERALOGICAL LOCALITIES IN AND AROUND NEW YORK CITY, AND THE
    MINERALS OCCURRING THEREIN.
    
    [Footnote: Continued from SUPPLEMENTS 244 and 246.]
    
    By NELSON H. DABTON.
    Header as received
    The Project Gutenberg eBook of Scientific American Supplement, No. 363, December 16, 1882
        
    This eBook is for the use of anyone anywhere in the United States and
    most other parts of the world at no cost and with almost no restrictions
    whatsoever. You may copy it, give it away or re-use it under the terms
    of the Project Gutenberg License included with this eBook or online
    at www.gutenberg.org. If you are not located in the United States,
    you will have to check the laws of the country where you are located
    before using this eBook.
    
    Title: Scientific American Supplement, No. 363, December 16, 1882
    
    Author: Various
    
    
            
    Release date: July 1, 2005 [eBook #8452]
                    Most recently updated: October 9, 2012
    
    Language: English
    
    Other information and formats: www.gutenberg.org/ebooks/8452
    
    Credits: Produced by Olaf Voss, Don Kretz, Juliet Sutherland, Charles
            Franks and the Online Distributed Proofreaders Team
    Full Project Gutenberg licence
        
    
    Updated editions will replace the previous one—the old editions will
    be renamed.
    
    Creating the works from print editions not protected by U.S. copyright
    law means that no one owns a United States copyright in these works,
    so the Foundation (and you!) can copy and distribute it in the United
    States without permission and without paying copyright
    royalties. Special rules, set forth in the General Terms of Use part
    of this license, apply to copying and distributing Project
    Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
    concept and trademark. Project Gutenberg is a registered trademark,
    and may not be used if you charge for an eBook, except by following
    the terms of the trademark license, including paying royalties for use
    of the Project Gutenberg trademark. If you do not charge anything for
    copies of this eBook, complying with the trademark license is very
    easy. You may use this eBook for nearly any purpose such as creation
    of derivative works, reports, performances and research. Project
    Gutenberg eBooks may be modified and printed and given away—you may
    do practically ANYTHING in the United States with eBooks not protected
    by U.S. copyright law. Redistribution is subject to the trademark
    license, especially commercial redistribution.
    
    
    START: FULL LICENSE
    
    THE FULL PROJECT GUTENBERG™ LICENSE
    
    PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
    
    To protect the Project Gutenberg™ mission of promoting the free
    distribution of electronic works, by using or distributing this work
    (or any other work associated in any way with the phrase “Project
    Gutenberg”), you agree to comply with all the terms of the Full
    Project Gutenberg License available with this file or online at
    www.gutenberg.org/license.
    
    Section 1. General Terms of Use and Redistributing Project Gutenberg
    electronic works
    
    1.A. By reading or using any part of this Project Gutenberg
    electronic work, you indicate that you have read, understand, agree to
    and accept all the terms of this license and intellectual property
    (trademark/copyright) agreement. If you do not agree to abide by all
    the terms of this agreement, you must cease using and return or
    destroy all copies of Project Gutenberg electronic works in your
    possession. If you paid a fee for obtaining a copy of or access to a
    Project Gutenberg electronic work and you do not agree to be bound
    by the terms of this agreement, you may obtain a refund from the person
    or entity to whom you paid the fee as set forth in paragraph 1.E.8.
    
    1.B. “Project Gutenberg” is a registered trademark. It may only be
    used on or associated in any way with an electronic work by people who
    agree to be bound by the terms of this agreement. There are a few
    things that you can do with most Project Gutenberg electronic works
    even without complying with the full terms of this agreement. See
    paragraph 1.C below. There are a lot of things you can do with Project
    Gutenberg electronic works if you follow the terms of this
    agreement and help preserve free future access to Project Gutenberg
    electronic works. See paragraph 1.E below.
    
    1.C. The Project Gutenberg Literary Archive Foundation (“the
    Foundation” or PGLAF), owns a compilation copyright in the collection
    of Project Gutenberg electronic works. Nearly all the individual
    works in the collection are in the public domain in the United
    States. If an individual work is unprotected by copyright law in the
    United States and you are located in the United States, we do not
    claim a right to prevent you from copying, distributing, performing,
    displaying or creating derivative works based on the work as long as
    all references to Project Gutenberg are removed. Of course, we hope
    that you will support the Project Gutenberg mission of promoting
    free access to electronic works by freely sharing Project Gutenberg
    works in compliance with the terms of this agreement for keeping the
    Project Gutenberg name associated with the work. You can easily
    comply with the terms of this agreement by keeping this work in the
    same format with its attached full Project Gutenberg License when
    you share it without charge with others.
    
    1.D. The copyright laws of the place where you are located also govern
    what you can do with this work. Copyright laws in most countries are
    in a constant state of change. If you are outside the United States,
    check the laws of your country in addition to the terms of this
    agreement before downloading, copying, displaying, performing,
    distributing or creating derivative works based on this work or any
    other Project Gutenberg work. The Foundation makes no
    representations concerning the copyright status of any work in any
    country other than the United States.
    
    1.E. Unless you have removed all references to Project Gutenberg:
    
    1.E.1. The following sentence, with active links to, or other
    immediate access to, the full Project Gutenberg License must appear
    prominently whenever any copy of a Project Gutenberg work (any work
    on which the phrase “Project Gutenberg” appears, or with which the
    phrase “Project Gutenberg” is associated) is accessed, displayed,
    performed, viewed, copied or distributed:
    
        This eBook is for the use of anyone anywhere in the United States and most
        other parts of the world at no cost and with almost no restrictions
        whatsoever. You may copy it, give it away or re-use it under the terms
        of the Project Gutenberg™ License included with this eBook or online
        at www.gutenberg.org. If you
        are not located in the United States, you will have to check the laws
        of the country where you are located before using this eBook.
      
    1.E.2. If an individual Project Gutenberg electronic work is
    derived from texts not protected by U.S. copyright law (does not
    contain a notice indicating that it is posted with permission of the
    copyright holder), the work can be copied and distributed to anyone in
    the United States without paying any fees or charges. If you are
    redistributing or providing access to a work with the phrase “Project
    Gutenberg” associated with or appearing on the work, you must comply
    either with the requirements of paragraphs 1.E.1 through 1.E.7 or
    obtain permission for the use of the work and the Project Gutenberg
    trademark as set forth in paragraphs 1.E.8 or 1.E.9.
    
    1.E.3. If an individual Project Gutenberg electronic work is posted
    with the permission of the copyright holder, your use and distribution
    must comply with both paragraphs 1.E.1 through 1.E.7 and any
    additional terms imposed by the copyright holder. Additional terms
    will be linked to the Project Gutenberg License for all works
    posted with the permission of the copyright holder found at the
    beginning of this work.
    
    1.E.4. Do not unlink or detach or remove the full Project Gutenberg
    License terms from this work, or any files containing a part of this
    work or any other work associated with Project Gutenberg.
    
    1.E.5. Do not copy, display, perform, distribute or redistribute this
    electronic work, or any part of this electronic work, without
    prominently displaying the sentence set forth in paragraph 1.E.1 with
    active links or immediate access to the full terms of the Project
    Gutenberg License.
    
    1.E.6. You may convert to and distribute this work in any binary,
    compressed, marked up, nonproprietary or proprietary form, including
    any word processing or hypertext form. However, if you provide access
    to or distribute copies of a Project Gutenberg work in a format
    other than “Plain Vanilla ASCII” or other format used in the official
    version posted on the official Project Gutenberg website
    (www.gutenberg.org), you must, at no additional cost, fee or expense
    to the user, provide a copy, a means of exporting a copy, or a means
    of obtaining a copy upon request, of the work in its original “Plain
    Vanilla ASCII” or other form. Any alternate format must include the
    full Project Gutenberg License as specified in paragraph 1.E.1.
    
    1.E.7. Do not charge a fee for access to, viewing, displaying,
    performing, copying or distributing any Project Gutenberg works
    unless you comply with paragraph 1.E.8 or 1.E.9.
    
    1.E.8. You may charge a reasonable fee for copies of or providing
    access to or distributing Project Gutenberg electronic works
    provided that:
    
        • You pay a royalty fee of 20% of the gross profits you derive from
            the use of Project Gutenberg works calculated using the method
            you already use to calculate your applicable taxes. The fee is owed
            to the owner of the Project Gutenberg trademark, but he has
            agreed to donate royalties under this paragraph to the Project
            Gutenberg Literary Archive Foundation. Royalty payments must be paid
            within 60 days following each date on which you prepare (or are
            legally required to prepare) your periodic tax returns. Royalty
            payments should be clearly marked as such and sent to the Project
            Gutenberg Literary Archive Foundation at the address specified in
            Section 4, “Information about donations to the Project Gutenberg
            Literary Archive Foundation.”
        
        • You provide a full refund of any money paid by a user who notifies
            you in writing (or by e-mail) within 30 days of receipt that s/he
            does not agree to the terms of the full Project Gutenberg™
            License. You must require such a user to return or destroy all
            copies of the works possessed in a physical medium and discontinue
            all use of and all access to other copies of Project Gutenberg™
            works.
        
        • You provide, in accordance with paragraph 1.F.3, a full refund of
            any money paid for a work or a replacement copy, if a defect in the
            electronic work is discovered and reported to you within 90 days of
            receipt of the work.
        
        • You comply with all other terms of this agreement for free
            distribution of Project Gutenberg™ works.
        
    
    1.E.9. If you wish to charge a fee or distribute a Project
    Gutenberg™ electronic work or group of works on different terms than
    are set forth in this agreement, you must obtain permission in writing
    from the Project Gutenberg Literary Archive Foundation, the manager of
    the Project Gutenberg™ trademark. Contact the Foundation as set
    forth in Section 3 below.
    
    1.F.
    
    1.F.1. Project Gutenberg volunteers and employees expend considerable
    effort to identify, do copyright research on, transcribe and proofread
    works not protected by U.S. copyright law in creating the Project
    Gutenberg™ collection. Despite these efforts, Project Gutenberg™
    electronic works, and the medium on which they may be stored, may
    contain “Defects,” such as, but not limited to, incomplete, inaccurate
    or corrupt data, transcription errors, a copyright or other
    intellectual property infringement, a defective or damaged disk or
    other medium, a computer virus, or computer codes that damage or
    cannot be read by your equipment.
    
    1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
    of Replacement or Refund” described in paragraph 1.F.3, the Project
    Gutenberg Literary Archive Foundation, the owner of the Project
    Gutenberg™ trademark, and any other party distributing a Project
    Gutenberg™ electronic work under this agreement, disclaim all
    liability to you for damages, costs and expenses, including legal
    fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
    LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
    PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
    TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
    LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
    INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
    DAMAGE.
    
    1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
    defect in this electronic work within 90 days of receiving it, you can
    receive a refund of the money (if any) you paid for it by sending a
    written explanation to the person you received the work from. If you
    received the work on a physical medium, you must return the medium
    with your written explanation. The person or entity that provided you
    with the defective work may elect to provide a replacement copy in
    lieu of a refund. If you received the work electronically, the person
    or entity providing it to you may choose to give you a second
    opportunity to receive the work electronically in lieu of a refund. If
    the second copy is also defective, you may demand a refund in writing
    without further opportunities to fix the problem.
    
    1.F.4. Except for the limited right of replacement or refund set forth
    in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
    OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
    LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
    
    1.F.5. Some states do not allow disclaimers of certain implied
    warranties or the exclusion or limitation of certain types of
    damages. If any disclaimer or limitation set forth in this agreement
    violates the law of the state applicable to this agreement, the
    agreement shall be interpreted to make the maximum disclaimer or
    limitation permitted by the applicable state law. The invalidity or
    unenforceability of any provision of this agreement shall not void the
    remaining provisions.
    
    1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
    trademark owner, any agent or employee of the Foundation, anyone
    providing copies of Project Gutenberg™ electronic works in
    accordance with this agreement, and any volunteers associated with the
    production, promotion and distribution of Project Gutenberg™
    electronic works, harmless from all liability, costs and expenses,
    including legal fees, that arise directly or indirectly from any of
    the following which you do or cause to occur: (a) distribution of this
    or any Project Gutenberg work, (b) alteration, modification, or
    additions or deletions to any Project Gutenberg work, and (c) any
    Defect you cause.
    
    Section 2. Information about the Mission of Project Gutenberg
    
    Project Gutenberg is synonymous with the free distribution of
    electronic works in formats readable by the widest variety of
    computers including obsolete, old, middle-aged and new computers. It
    exists because of the efforts of hundreds of volunteers and donations
    from people in all walks of life.
    
    Volunteers and financial support to provide volunteers with the
    assistance they need are critical to reaching Project Gutenberg’s
    goals and ensuring that the Project Gutenberg collection will
    remain freely available for generations to come. In 2001, the Project
    Gutenberg Literary Archive Foundation was created to provide a secure
    and permanent future for Project Gutenberg and future
    generations. To learn more about the Project Gutenberg Literary
    Archive Foundation and how your efforts and donations can help, see
    Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
    
    Section 3. Information about the Project Gutenberg Literary Archive Foundation
    
    The Project Gutenberg Literary Archive Foundation is a non-profit
    501(c)(3) educational corporation organized under the laws of the
    state of Mississippi and granted tax exempt status by the Internal
    Revenue Service. The Foundation’s EIN or federal tax identification
    number is 64-6221541. Contributions to the Project Gutenberg Literary
    Archive Foundation are tax deductible to the full extent permitted by
    U.S. federal laws and your state’s laws.
    
    The Foundation’s business office is located at 41 Watchung Plaza #516,
    Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
    to date contact information can be found at the Foundation’s website
    and official page at www.gutenberg.org/contact
    
    Section 4. Information about Donations to the Project Gutenberg
    Literary Archive Foundation
    
    Project Gutenberg™ depends upon and cannot survive without widespread
    public support and donations to carry out its mission of
    increasing the number of public domain and licensed works that can be
    freely distributed in machine-readable form accessible by the widest
    array of equipment including outdated equipment. Many small donations
    ($1 to $5,000) are particularly important to maintaining tax exempt
    status with the IRS.
    
    The Foundation is committed to complying with the laws regulating
    charities and charitable donations in all 50 states of the United
    States. Compliance requirements are not uniform and it takes a
    considerable effort, much paperwork and many fees to meet and keep up
    with these requirements. We do not solicit donations in locations
    where we have not received written confirmation of compliance. To SEND
    DONATIONS or determine the status of compliance for any particular state
    visit www.gutenberg.org/donate.
    
    While we cannot and do not solicit contributions from states where we
    have not met the solicitation requirements, we know of no prohibition
    against accepting unsolicited donations from donors in such states who
    approach us with offers to donate.
    
    International donations are gratefully accepted, but we cannot make
    any statements concerning tax treatment of donations received from
    outside the United States. U.S. laws alone swamp our small staff.
    
    Please check the Project Gutenberg web pages for current donation
    methods and addresses. Donations are accepted in a number of other
    ways including checks, online payments and credit card donations. To
    donate, please visit: www.gutenberg.org/donate.
    
    Section 5. General Information About Project Gutenberg electronic works
    
    Professor Michael S. Hart was the originator of the Project
    Gutenberg concept of a library of electronic works that could be
    freely shared with anyone. For forty years, he produced and
    distributed Project Gutenberg eBooks with only a loose network of
    volunteer support.
    
    Project Gutenberg eBooks are often created from several printed
    editions, all of which are confirmed as not protected by copyright in
    the U.S. unless a copyright notice is included. Thus, we do not
    necessarily keep eBooks in compliance with any particular paper
    edition.
    
    Most people start at our website which has the main PG search
    facility: www.gutenberg.org.
    
    This website includes information about Project Gutenberg,
    including how to make donations to the Project Gutenberg Literary
    Archive Foundation, how to help produce our new eBooks, and how to
    subscribe to our email newsletter to hear about new eBooks.

    Source: Project Gutenberg ebook #8452. Public-domain status is recorded per item; the licence text above is reproduced unchanged.

    Source
    Project Gutenberg
    Record
    ebook 8452
    Rights
    public domain (US)
    Rendered
    2026-11-21
    Completeness
    First 200,000 characters rendered.