Gutenberg · e01.org

← catalogue

Acetylene, the Principles of Its Generation and Use

by F. H. Leeds · English · Gutenberg #8144 · 1,040,719 chars · public domain (US)

The Project Gutenberg eBook of Acetylene, the Principles of Its Generation and Use
    
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.

Title: Acetylene, the Principles of Its Generation and Use

Author: F. H. Leeds
        W. J. Atkinson Butterfield


        
Release date: May 1, 2005 [eBook #8144]
                Most recently updated: May 17, 2013

Language: English

Other information and formats: www.gutenberg.org/ebooks/8144

Credits: Produced by Richard Prairie, Tonya Allen, Juliet Sutherland,
        Charles Franks, and the Online Distributed Proofreading Team


*** START OF THE PROJECT GUTENBERG EBOOK ACETYLENE, THE PRINCIPLES OF ITS GENERATION AND USE ***




Produced by Richard Prairie, Tonya Allen, Juliet Sutherland,
Charles Franks, and the Online Distributed Proofreading Team








ACETYLENE

THE PRINCIPLES OF ITS GENERATION AND USE

A PRACTICAL HANDBOOK ON THE PRODUCTION, PURIFICATION, AND SUBSEQUENT
TREATMENT OF ACETYLENE FOR THE DEVELOPMENT OF LIGHT, HEAT, AND POWER

Second Edition

REVISED AND ENLARGED

BY

F. H. LEEDS, F.I.C.

FOR SOME YEARS TECHNICAL EDITOR OF THE JOURNAL "ACETYLENE"

AND

W. J. ATKINSON BUTTERFIELD, M.A.

AUTHOR OF "THE CHEMISTRY OF GAS MANUFACTURE"







PREFATORY NOTE TO THE FIRST EDITION

In compiling this work on the uses and application of acetylene, the
special aim of the authors has been to explain the various physical and
chemical phenomena:

(1) Accompanying the generation of acetylene from calcium carbide and
water.

(2) Accompanying the combustion of the gas in luminous or incandescent
burners, and

(3) Its employment for any purpose--(a) neat, (b) compressed into
cylinders, (c) diluted, and (d) as an enriching material.

They have essayed a comparison between the value of acetylene and other
illuminants on the basis of "illuminating effect" instead of on the
misleading basis of pure "illuminating power," a distinction which they
hope and believe will do much to clear up the misconceptions existing on
the subject. Tables are included, for the first time (it is believed) in
English publications, of the proper sizes of mains and service-pipes for
delivering acetylene at different effective pressures, which, it is
hoped, will prove of use to those concerned in the installation of
acetylene lighting systems.

_June_ 1903

NOTE TO THE SECOND EDITION

The revision of this work for a new edition was already far advanced when
it was interrupted by the sudden death on April 30, 1908, of Mr. F. H.
Leeds. The revision was thereafter continued single-handed, with the help
of very full notes which Mr. Leeds had prepared, by the undersigned. It
had been agreed prior to Mr. Leeds' death that it would add to the
utility of the work if descriptions of a number of representative
acetylene generators were given in an Appendix, such as that which now
appears at the conclusion of this volume. Thanks are due to the numerous
firms and individuals who have assisted by supplying information for use
in this Appendix.

W. J. ATKINSON BUTTERFIELD

WESTMINSTER

_August 1909_

CONTENTS

CHAPTER I

INTRODUCTORY--THE COST AND ADVANTAGES OF ACETYLENE LIGHTING

Intrinsic advantages
Hygienic advantages
Acetylene and paraffin oil
Blackened ceilings
Cost of acetylene lighting
Cost of acetylene and coal-gas
Cost of acetylene and electric lighting
Cost of acetylene and paraffin oil
Cost of acetylene and air-gas
Cost of acetylene and candles
Tabular statement of costs (_to face_)
Illuminating power and effect


CHAPTER II

THE PHYSICS AND CHEMISTRY OF THE REACTION BETWEEN CARBIDE AND WATER

Nature of calcium carbide
Storage of calcium carbide
Fire risks of acetylene lighting
Purchase of carbide
Quality and sizes of carbide
Treated and scented carbide
Reaction between carbide and water
  chemical nature
  heat evolved
  difference between heat and temperature
  amount of heat evolved
  effect of heat on process of generation
Reaction:
  effects of heat
  effect of heat on the chemical reaction
  effects of heat on the acetylene
  effects of heat on the carbide
Colour of spent carbide
Maximum attainable temperatures
Soft solder in generators
Reactions at low temperatures
Reactions at high temperatures
Pressure in generators

CHAPTER III

THE GENERAL PRINCIPLES OF ACETYLENE GENERATION ACETYLENE GENERATING
APPARATUS

Automatic and non-automatic generators
Control of the chemical reaction
Non-automatic carbide-to-water generators
Non-automatic water-to-carbide generators
Automatic devices
Displacement gasholders
Action of water-to-carbide generators
Action of carbide-to-water generators
Use of oil in generator
Rising gasholder
Deterioration of acetylene on storage
Freezing and its avoidance
Corrosion in apparatus
Isolation of holder from generator
Water-seals
Vent pipes and safety valve
Frothing in generator
Dry process of generation
Artificial lighting of generator sheds

CHAPTER IV

THE SELECTION OF AN ACETYLENE GENERATOR

Points to be observed
Recommendations of Home Office Committee
British and Foreign regulations for the construction and installation of
   acetylene generating plant

CHAPTER V

THE TREATMENT OF ACETYLENE AFTER GENERATION

Impurities in calcium carbide
Impurities of acetylene
Removal of moisture
Generator impurities in acetylene
Filters
Carbide impurities in acetylene
Washers
Reasons for purification
Necessary extent of purification
Quantity of impurities in acetylene
Purifying materials
Bleaching powder
Heratol, frankoline, acagine, and puratylene
Efficiency of purifying material
Minor reagent
Method of a gas purifier
Methods of determining exhaustion of purifying material
Regulations for purification
Drying
Position of purifier
Filtration
General arrangement of plans
Generator residues
Disposal of residue

CHAPTER VI

THE CHEMICAL AND PHYSICAL PROPERTIES OF ACETYLENE

Physical properties
Leakage
Heat of combustion
Explosive limits
Range of explosibility
Solubility in liquids
Toxicity
Endothermic nature
Polymerisation
Heats of formation and combustion
Colour of flame
Radiant efficiency
Chemical properties
Reactions with copper

CHAPTER VII

MAINS AND SERVICE-PIPES--SUBSIDIARY APPARATUS

Meters
Governors
Gasholder pressure
Pressure-gauges
Dimensions of mains and pipes
Velocity of flow in pipes
Service-pipes and mains
Leakage
Pipes and fittings
Laying mains
Expelling air from pipes
Tables of pipes and mains

CHAPTER VIII

COMBUSTION OF ACETYLENE IN LUMINOUS BURNERS--THEIR DISPOSITION

Nature of luminous flames
Illuminating power
Early burners
Injector and twin-flame burners
Illuminating power of self-luminous burners
Glassware for burners

CHAPTER IX

INCANDESCENT BURNERS--HEATING APPARATUS--MOTORS--AUTOGENOUS SOLDERING

Merits of incandescent lighting
Conditions for incandescent lighting
Illuminating power of incandescent burners
Durability of mantles
Typical incandescent burners
Acetylene for heating and cooking
Acetylene motors
Blowpipes
Autogenous soldering and welding

CHAPTER X

CARBURETTED ACETYLENE

Carburetted acetylene
Illuminating power of carburetted acetylene
Carburetted acetylene for "power"


CHAPTER XI

COMPRESSED AND DISSOLVED ACETYLENE--MIXTURES WITH OTHER GASES

Compression
Dissolved acetylene
Solution in acetone
Liquefied acetylene
Dilution with carbon dioxide
Dilution with air
Mixed carbides
Dilution with, methane and hydrogen
Self-inflammable acetylene
Enrichment with acetylene
Partial pressure
Acetylene-oil-gas

CHAPTER XII

SUNDRY USES

Destruction of noxious moths
Destruction of phylloxera and mildew
Manufacture of lampblack
Production of tetrachlorethane
Utilisation of residues
Sundry uses for the gas

CHAPTER XIII

PORTABLE ACETYLENE LAMPS AND PLANT

Table and vehicular lamps
Flare lamps
Cartridges of carbide
Cycle-lamp burners
Railway lighting

CHAPTER XIV

VALUATION AND ANALYSIS OF CARBIDE

Regulations of British Acetylene Association
Regulations o£ German Acetylene Association
Regulations of Austrian Acetylene Association
Sampling carbide
Yield of gas from small carbide
Correction of volumes for temperature and pressure
Estimation of impurities
Tabular numbers

APPENDIX

DESCRIPTIONS OP GENERATORS

America: Canada
America: United States
Austria-Hungary
Belgium
France
Germany
Great Britain and Ireland

INDEX

INDEX TO APPENDIX



ACETYLENE



CHAPTER I

INTRODUCTORY--THE COST AND ADVANTAGES OF ACETYLENE LIGHTING

Acetylene is a gas [Footnote: For this reason the expression, "acetylene
gas," which is frequently met with, would be objectionable on the ground
of tautology, even if it were not grammatically and technically
incorrect. "Acetylene-gas" is perhaps somewhat more permissible, but it
is equally redundant and unnecessary.] of which the most important
application at the present time is for illuminating purposes, for which
its properties render it specially well adapted. No other gas which can
be produced on a commercial scale is capable of giving, volume for
volume, so great a yield of light as acetylene. Hence, apart from the
advantages accruing to it from its mode of production and the nature of
the raw material from which it is produced, it possesses an inherent
advantage over other illuminating gases in the smaller storage
accommodation and smaller mains and service-pipes requisite for the
maintenance of a given supply of artificial light. For instance, if a
gasholder is required to contain sufficient gas for the lighting of an
establishment or district for twenty-four hours, its capacity need not be
nearly so great if acetylene is employed as if oil-gas, coal-gas, or
other illuminating gas is used. Consequently, for an acetylene supply the
gasholder can be erected on a smaller area and for considerably less
outlay than for other gas supplies. In this respect acetylene has an
unquestionable economical advantage as a competitor with other varieties
of illuminating gas for supplies which have generally been regarded as
lying peculiarly within their preserves. The extent of this advantage
will be referred to later.

The advantages that accrue to acetylene from its mode of production, and
the nature of the raw material from which it is obtained, are in reality
of more importance. Acetylene is readily and quickly produced from a raw
material--calcium carbide--which, relatively to the yield of light of the
gaseous product, is less bulky than the raw materials of other gases. In
comparison also with oils and candles, calcium carbide is capable of
yielding, through the acetylene obtainable from it, more light per unit
of space occupied by it. This higher light-yielding capacity of calcium
carbide, ready to be developed through acetylene, gives the latter gas a
great advantage over all other illuminants in respect of compactness for
transport or storage. Hence, where facilities for transport or storage
are bad or costly, acetylene may be the most convenient or cheapest
illuminant, notwithstanding its relatively high cost in many other cases.
For example, in a district to which coal and oil must be brought great
distances, the freight on them may be so heavy that--regarding the
question as simply one of obtaining light in the cheapest manner--it may
be more economical to bring calcium carbide an equal or even greater
distance and generate acetylene from it on the spot, than to use oil or
make coal-gas for lighting purposes, notwithstanding that acetylene may
not be able to compete on equal terms with oil--or coal-gas at the place
from which the carbide is brought. Likewise where storage accommodation
is limited, as in vehicles or in ships or lighthouses, calcium carbide
may be preferable to oil or other illuminants as a source of light.
Disregarding for the moment intrinsic advantages which the light
obtainable from acetylene has over other lights, there are many cases
where, owing to saving in cost of carriage, acetylene is the most
economical illuminant; and many other cases where, owing to limited space
for storage, acetylene far surpasses other illuminants in convenience,
and is practically indispensable.

The light of the acetylene flame has, however, some intrinsic advantages
over the light of other artificial illuminants. In the first place, the
light more closely resembles sunlight in composition or "colour." It is
more nearly a pure "white" light than is any other flame or incandescent
body in general use for illuminating purposes. The nature or composition
of the light of the acetylene flame will be dealt with more exhaustively
later, and compared with that afforded by other illuminants; but,
speaking generally, it may be said that the self-luminous acetylene light
is superior in tint, to all other artificial lights, for which reason it
is invaluable for colour-judging and shade-matching. In the second
place, when the gas issues from a suitable self-luminous burner under
proper pressure, the acetylene flame is perfectly steady; and in this
respect it in preferable to most types of electric light, to all self-
luminous coal-gas flames and candles, and to many varieties of oil-lamp.
In steadiness and freedom from flicker it is fully equal to incandescent
coal-gas light, but it in distinctly superior to the latter by virtue of
its complete freedom from noise. The incandescent acetylene flame emits a
slight roaring, but usually not more than that coming from an
atmospheric coal-gas burner. With the exception of the electric arc,
self-luminous acetylene yields a flame of unsurpassed intensity, and yet
its light is agreeably soft. In the third place, where electricity is
absent, a brilliancy of illumination which can readily be obtained from
self-luminous acetylene can otherwise only be procured by the employment
of the incandescent system applied either to coal-gas or to oil; and
there are numerous situations, such as factories, workshops, and the
like, where the vibration of the machinery or the prevalence of dust
renders the use of mantles troublesome if not impossible. Anticipating
what will be said later, in cases like these, the cost of lighting by
self-luminous acetylene may fairly be compared with self-luminous coal-
gas or oil only; although in other positions the economy of the Welsbach
mantle must be borne in mind.

Acetylene lighting presents also certain important hygienic advantages
over other forms of flame lighting, in that it exhausts, vitiates, and
heats the air of a room to a less degree, for a given yield of light,
than do either coal-gas, oils, or candles. This point in favour of
acetylene is referred to here only in general terms; the evidence on
which the foregoing statement is based will be recorded in a tabular
comparison of the cost and qualities of different illuminants. Exhaustion
of the air means, in this connexion, depletion of the oxygen normally
present in it. One volume of acetylene requires 2-1/2 volumes of oxygen
for its complete combustion, and since 21 volumes of oxygen are
associated in atmospheric air with 79 volumes of inert gases--chiefly
nitrogen--which do not actively participate in combustion, it follows
that about 11.90 volumes of air are wholly exhausted, or deprived of
oxygen, in the course of the combustion of one volume of acetylene. If
the light which may be developed by the acetylene is brought into
consideration, it will be found that, relatively to other illuminants,
acetylene causes less exhaustion of the air than any other illuminating
agent except electricity. For instance, coal-gas exhausts only about 6-
1/2 times its volume of air when it is burnt; but since, volume for
volume, acetylene ordinarily yields from three to fifteen times as much
light as coal-gas, it follows that the same illuminative value is
obtainable from acetylene by considerably less exhaustion of the air than
from coal-gas. The exact ratio depends on the degree of efficiency of the
burners, or of the methods by which light is obtained from the gases, as
will be realised by reference to the table which follows. Broadly
speaking, however, no illuminant which evolves light by combustion
(oxidation), and which therefore requires a supply of oxygen or air for
its maintenance, affords light with so little exhaustion of the air as
acetylene. Hence in confined, ill-ventilated, or crowded rooms, the air
will suffer less exhaustion, and accordingly be better for breathing, if
acetylene is chosen rather than any other illuminant, except electricity.

Next, in regard to vitiation of the air, by which is meant the alteration
in its composition resulting from the admixture of products of combustion
with it. Electric lighting is as superior to other modes of lighting in
respect of direct vitiation as of exhaustion of the air, because it does
not depend on combustion. Putting it aside, however, light is obtainable
by means of acetylene with less attendant vitiation of the air than by
means of any other gas or of oil or candles. The principal vitiating
factor in all cases is the carbonic acid produced by the combustion. Now
one volume of acetylene on combustion yields two volumes of carbonic
acid, whereas one volume of coal-gas yields about 0.6 volume of carbonic
acid. But even assuming that the incandescent system of lighting is
applied in the case of coal-gas and not of acetylene, the ratio of the
consumption of the two gases for the development of a given illuminative
effect will be such that no more carbonic acid will be produced by the
acetylene; and if the incandescent system is applied either in both cases
or in neither, the ratio will be greatly in favour of acetylene. The
other factors which determine the vitiation of the air of a room in which
the gas is burning are likewise under ordinary conditions more in favour
of acetylene. They are not, however, constant, since the so-called
"impurities," which on combustion cause vitiation of the air, vary
greatly in amount according to the extent to which the gases have been
purified. London coal-gas, which was formerly purified to the highest
degree practically attainable, used to contain on the average only 10 to
12 grains of sulphur per 100 cubic feet, and virtually no other impurity.
But now coal-gas, in London and most provincial towns, contains 40 to 50
grains of sulphur per 100 cubic foot. At least 5 grains of ammonia per
100 cubic foot in also present in coal-gas in some towns. Crude acetylene
also contains sulphur and ammonia, that coming from good quality calcium
carbide at the present day including about 31 grains of the former and
25 grains of the latter per 100 cubic feet. But crude acetylene is also
accompanied by a third impurity, viz., phosphoretted hydrogen or
phosphine, which in unknown in coal-gas, and which is considerably more
objectionable than either ammonia or sulphur. The formation, behaviour,
and removal of those various impurities will be discussed in Chapter V.;
but here it may be said that there is no reason why, if calcium carbide
of a fair degree of purity has been used, and if the gas has been
generated from it in a properly designed and smoothly working apparatus--
this being quite as important as, or even more important than, the purity
of the original carbide--the gas should not be freed from phosphorus,
sulphur, and ammonia to the utmost necessary or desirable extent, by
processes which are neither complicated nor expensive. And if this is
done, as it always should be whenever the acetylene is required for
domestic lighting, the vitiation of the air of a room due to the
"impurities" in the gas will become much less in the case of acetylene
than in that of even well-purified coal-gas; taking equal illuminating
effect as the basis for comparison.

Acetylene is similarly superior, speaking generally, to petroleum in
respect of impurities, though the sulphur present in petroleum oils, such
as are sold in this country for household use, though very variable, is
often quite small in amount, and seldom is responsible for serious
vitiation of the atmosphere.

Regarding somewhat more closely the relative convenience and safety of
acetylene and paraffin for the illumination of country residences, it may
be remarked that an extraordinarily great amount of care must be bestowed
upon each separate lamp if the whole house is to be kept free from an
odour which is very offensive to the nostrils; and the time occupied in
this process, which of itself is a disagreeable one, reaches several
hours every day. Habit has taught the country dweller to accept as
inevitable this waste of time, and largely to ignore the odour of
petroleum in his abode; but the use of acetylene entirely does away with
the daily cleaning of lamps, and, if the pipe-fitting work has been done
properly, yields light absolutely unaccompanied by smell. Again, unless
most carefully managed, the lamp-room of a large house, with its store of
combustible oil, and its collection of greasy rags, must unavoidably
prove a sensible addition to the risk of fire. The analogue of the lamp-
room when acetylene is employed is the generator-house, and this is a
separate building at some distance from the residence proper. There need
be no appreciable odour in the generator-house, except during the times
of charging the apparatus; but if there is, it passes into the open air
instead of percolating into the occupied apartments.

The amount of heat developed by the combustion of acetylene also is less
for a given yield of light than that developed by most other illuminants.
The gas, indeed, is a powerful heating gas, but owing to the amount
consumed being so small in proportion to the light developed, the heat
arising from acetylene lighting in a room is less than that from most
other illuminating agents, if the latter are employed to the extent
required to afford equally good illumination. The ratio of the heat
developed in acetylene lighting to that developed in, _e.g._,
lighting by ordinary coal-gas, varies considerably according to the
degree of efficiency of the burners, or, in other words, of the methods
by which light is obtained from the gases. Volume for volume, acetylene
yields on combustion about three and a half times as much heat as coal-
gas, yet, owing to its superior efficiency as an illuminant, any required
light may be obtained through it with no greater evolution of heat than
the best practicable (incandescent) burners for coal-gas produce. The
heat evolved by acetylene burners adequate to yield a certain light is
very much less than that evolved by ordinary flat-flame coal-gas burners
or by oil-lamps giving the same light, and is not more than about three
times as much as that from ordinary electric lamps used in numbers
sufficient to give the same light. More exact figures for the ratio
between the heat developed in acetylene lighting and that in other modes
of lighting are given in the table already referred to.

In connexion with the smaller amount of heat developed per unit of light
when acetylene is the illuminant, the frequently exaggerated claim that
acetylene does not blacken ceilings at all may be studied. Except it be a
carelessly manipulated petroleum-lamp, no form of artificial illuminant
employed nowadays ever emits black smoke, soot, or carbon, in spite of
the fact that all luminous flames commercially capable of utilisation do
contain free carbon in the elemental state. The black mark on a ceiling
over a source of light is caused by a rising current of hot air and
combustion products set up by the heat accompanying the light, which
current of hot gas carries with it the dust and dirt always present in
the atmosphere of an inhabited room. As this current of air and burnt gas
travels in a fairly concentrated vertical stream, and as the ceiling is
comparatively cool and exhibits a rough surface, that dust and dirt are
deposited on the ceiling above the flame, but the stain is seldom or
never composed of soot from the illuminant itself. Proof of this
statement may be found in the circumstance that a black mark is
eventually produced over an electric glow-lamp and above a pipe
delivering hot water. Clearly, therefore, the depth and extent of the
mark will depend on the volume and temperature of the hot gaseous
current; and since per unit of light acetylene emits a far smaller
quantity of combustion products and a far smaller amount of heat than any
other flame illuminant except incandescent coal-gas, the inevitable black
mark over its flame takes very much longer to appear. Quite roughly
speaking, as may be deduced from what has already been said on this
subject, the luminous flame of acetylene "blackens" a ceiling at about
the same rate as a coal-gas burner of the best Welsbach type.

There is one respect in which acetylene and other flame illuminants are
superior to electric lighting, viz., that they sterilise a larger volume
of air. All the air which is needed to support combustion, as well as the
excess of air which actually passes through the burner tube and flame in
incandescent burners, is obviously sterilised; but so also is the much
larger volume of air which, by virtue of the up-current due to the heat
of the flame, is brought into anything like close proximity with the
light. The electric glow-lamp, and the most popular and economical modern
enclosed electric arc-lamp, sterilise only the much smaller volume of air
which is brought into direct contact with their glass bulbs. Moreover,
when large numbers of persons are congregated in insufficiently
ventilated buildings--and many public rooms are insufficiently
ventilated--the air becomes nauseous to inspire and positively
detrimental to the health of delicate people, by reason of the human
effluvia which arise from soiled raiment and uncleansed or unhealthy
bodies, long before the proportion of carbonic acid by itself is high
enough to be objectionable. Thus a certain proportion of carbonic acid
coming from human lungs and skin is more harmful than the same proportion
of carbonic acid derived from the combustion of gas or oil. Hence
acetylene and flame illuminants generally have the valuable hygienic
advantages over electric lighting, not only of killing a far larger
number of the micro-organisms that may be present in the air, but, by
virtue of their naked flames, of burning up and destroying a considerable
quantity of the aforesaid odoriferous matter, thus relieving the nose and
materially assisting in the prevention of that lassitude and anæmia
occasionally follow the constant inspiration of air rendered foul by
human exhalations.

The more important advantages of acetylene as an illuminant have now been
indicated, and it remains to discuss the cost of acetylene lighting in
comparison with other modes of procuring artificial light. At the outset
it may be stated that a very much greater reduction in the price of
calcium carbide--from which acetylene is produced--than is likely to
ensue under the present methods and conditions of manufacture will be
required to make acetylene lighting as cheap as ordinary gas lighting in
towns in this country, provided incandescent burners are used for the
gas. On the score of cheapness (and of convenience, unless the acetylene
were delivered to the premises from some central generating station)
acetylene cannot compete as an illuminant with coal-gas where the latter
costs, say, not more than 5s. per 1000 cubic feet, if only
reasonable attention is given to the gas-burners, and at least a quarter
of them are on the incandescent system. If, on the other hand, coal-gas
is misused and wasted through the employment only of interior or worn-out
flat-flame burners, while the best types of burner are used for
acetylene, the latter gas may prove as cheap for lighting as coal-gas at,
say, 2s. 6d. per 1000 cubic feet (and be far better hygienically);
whereas, contrariwise, if coal-gas is used only with good and properly
maintained incandescent burners, it may cost over 10s. per 1000 cubic
feet, and be cheaper than acetylene burned in good burners (and as good
from the hygienic standpoint). More precise figures on the relative costs
of coal-gas lighting and acetylene lighting are given in the tabular
statement at the close of this chapter.

With regard to electric lighting it is somewhat difficult to lay down a
fair basis of comparison, owing to the wide variations in the cost of
current, and in the efficiency of lamps, and to the undoubted hygienic
and aesthetic claims of electric lighting to precedence. But in towns in
this country where there is a public electricity supply, electric
lighting will be used rather than acetylene for the same reasons that it
is preferred to coal-gas. Cost is only a secondary consideration in such
cases, and where coal-gas is reasonably cheap, and nevertheless gives
place to electric lighting, acetylene clearly cannot hope to supplant the
latter. [Footnote: Where, however, as is frequently the case with small
public electricity-supply works, the voltage of the supply varies
greatly, the fluctuations in the light of the lamps, and the frequent
destruction of fuses and lamps, are such manifest inconveniences that
acetylene is in fact now being generally preferred to electric lighting
in such circumstances.] But where current cannot be had from an
electricity-supply undertaking, and it is a question, in the event of
electric lighting being adopted, of generating current by driving a
dynamo, either by means of a gas-engine supplied from public gas-mains,
by means of a special boiler installation, or by means of an oil-engine
or of a power gas-plant and gas-engine, the claims of acetylene to
preference are very strong. An important factor in the estimation of the
relative advantages of electricity and acetylene in such cases is the
cost of labour in looking after the generating plant. Where a gas-engine
supplied from public gas-mains is used for driving the dynamo, electric
lighting can be had at a relatively small expenditure for attendance on
the generating plant. But the cost of the gas consumed will be high, and
actually light could be obtained directly from the gas by means of
incandescent mantles at far loss cost than by consuming the gas in a
motor for the indirect production of light by means of electric current.
Therefore electric lighting, if adopted under these conditions, must be
preferred to gas lighting from considerations which are deemed to
outweigh those of a much higher cost, and acetylene does not present so
great advantages over coal-gas as to affect the choice of electric
lighting. But in the cases where there is no public gas-supply, and
current must be generated from coal or coke or oil consumed on the spot,
the cost of the skilled labour required to look after either a boiler,
steam-engine and dynamo, or a power gas-plant and gas-engine or oil-
engine and dynamo, will be so heavy that unless the capacity of the
installation is very great, acetylene will almost certainly prove a
cheaper and more convenient method of obtaining light. The attention
required by an acetylene installation, such as a country house of upwards
of thirty rooms would want, is limited to one or two hours' labour per
diem at any convenient time during daylight. Moreover, the attendant need
not be highly paid, as he will not have required an engineman's training,
as will the attendant on an electric lighting plant. The latter, too,
must be present throughout the hours when light is wanted unless a heavy
expenditure has been incurred on accumulators. Furthermore, the capital
outlay on generating plant will be very much less for acetylene than for
electric lighting. General considerations such as these lead to the
conclusion that in almost all country districts in this country a house
or institution could be lighted more cheaply by means of acetylene than
by electricity. In the tabular statement of comparative costs of
different modes of lighting, electric lighting has been included only on
the basis of a fixed cost per unit, as owing to the very varied cost of
generating current by small installations in different parts of the
country it would be futile to attempt to give the cost of electric
lighting on any other basis, such as the prime cost of coal or coke in a
particular district. Where current is supplied by a public electricity-
supply undertaking, the cost per unit is known, and the comparative costs
of electric light and acetylene can be arrived at with tolerable
precision. It has not been thought necessary to include in the tabular
statement electric arc-lamps, as they are only suitable for the lighting
of large spaces, where the steadiness and uniformity of the illumination
are of secondary importance. Under such conditions, it may be stated
parenthetically, the electric arc-light is much less costly than
acetylene lighting would be, but it is now in many places being
superseded by high-pressure gas or oil incandescent lights, which are
steady and generally more economical than the arc light.

The illuminant which acetylene is best fitted to supersede on the score
of convenience, cleanliness, and hygienic advantages is oil. By oil is
meant, in this connection, the ordinary burning petroleum, kerosene, or
paraffin oil, obtained by distilling and refining various natural oils
and shales, found in many countries, of which the United States
(principally Pennsylvania), Russia (the Caucasus chiefly), and Scotland
are practically the only ones which supply considerable quantities for
use in Great Britain. Attempts are often made to claim superiority for
particular grades of these oils, but it may be at once stated that so for
as actual yield of light is concerned, the same weight of any of the
commercial oils will give practically the same result. Hence in the
comparative statement of the cost of different methods of lighting, oil
will be taken at the cheapest rate at which it could ordinarily be
obtained, including delivery charges, at a country house, when bought by
the barrel. This rate at the present time is about ninepence per gallon.
A higher price may be paid for grades of mineral oil reputed to be safer
or to give a "brighter" or "clearer" light; but as the quantity of light
depends mainly upon the care and attention bestowed on the burner and
glass fittings of the lamp, and partly upon the employment of a suitable
wick, while the safety of each lamp depends at least as much upon the
design of that lamp, and the accuracy with which the wick fits the burner
tube, as upon the temperature at which the oil "flashes," the extra
expense involved in burning fancy-priced oils will not be considered
here.

The efficiency (_i.e._, the light yielded per pint or other unit
volume consumed) of oil-lamps varies greatly, and, speaking broadly,
increases with the power of the lamp. But as large or high-power lamps
are not needed throughout a house, it is fairer to assume that the light
obtainable from oil in ordinary household use is the mean of that
afforded by large and that afforded by small lamps. A large oil-lamp as
commonly used in country houses will give a light of about 20 candle-
power, while a convenient small lamp will give a light of not more than
about 5 candle-power. The large lamp will burn about 55 hours for every
gallon of oil consumed, or give an illuminating duty of about 1100
candle-hours (_i.e._, the product of candle-power by burning-hours)
per gallon. The small lamp, on the other hand, will burn about 140 hours
for every gallon of oil consumed, or give an illuminating duty of about
700 candle-hours per gallon. Actually large lamps would in most country
houses be used only in the entrance hall, living-rooms, and kitchen,
while passages and minor rooms on the lower floors would be lighted by
small lamps. Hence, making due allowance for the lower rate of
consumption of the small lamps, it will be seen that, given equal numbers
of large and small lamps in use, the mean illuminating duty of a gallon
of oil as burnt in country houses will be 987, or, in round figures, 990
candle-hours. Usually candles are used in the bedrooms of country houses
where the lower floors are lighted by means of petroleum lamps; but when
acetylene is installed in such a house it will frequently be adopted in
the principal bed- and dressing-rooms as well as in the living-rooms, as,
unless candles are employed very lavishly, they are really totally
inadequate to meet the reasonable demands for light of, _e.g._, a
lady dressing for dinner. Where acetylene displaces candles as well as
lamps in a country house, it is necessary, in comparing the cost of the
new illuminant with that of the candles and oil, to bear in mind the
superior degree of illumination which is secured in all rooms, at least
where candles were formerly used.

In regard to exhaustion and vitiation of the air, and to heat evolved,
self-luminous petroleum lamps stand on much the same footing as coal-gas
when the latter is burned in flat-flame burners, if the comparison is
based on a given yield of light. A large lamp, owing to its higher
illuminating efficiency, is better in this respect than a small one--
light for light, it is more hygienic than ordinary flat-flame coal-gas
burners, while a small lamp is less hygienic. It will therefore be
understood at once, from what has already been said about the superiority
on hygienic grounds of acetylene to flat-flame coal-gas lighting, that
acetylene is in this respect far superior to petroleum lamps. The degree
of its superiority is indicated more precisely by the figures quoted in
the tabular statement which concludes this chapter.

Before giving the tabular statement, however, it is necessary to say a
few words in regard to one method of lighting which, may possibly develop
into a more serious competitor with acetylene for the lighting of the
better class of country house than any of the illuminating agents and
modes of lighting so far referred to. The method in question is lighting
by so-called air-gas used for raising mantles to incandescence in
upturned or inverted burners of the Welsbach-Kern type. "Air-gas" is
ordinary atmospheric air, more or less completely saturated with the
vapour of some highly volatile hydrocarbon. The hydrocarbons practically
applied have so far been only "petroleum spirit" or "carburine," and
"benzol." "Petroleum spirit" or "carburine" consists of the more highly
volatile portion of petroleum, which is removed by distillation before
the kerosene or burning oil is recovered from the crude oil. Several
grades of this highly volatile petroleum distillate are distinguished in
commerce; they differ in the temperature at which they begin to distil
and the range of temperature covered by their distillation, and, speaking
more generally, in their degree of volatility, uniformity, and density.
If the petroleum distillate is sufficiently volatile and fairly uniform
in character, good air-gas may be produced merely by allowing air to pass
over an extended surface of the liquid. The vapour of the petroleum
spirit is of greater density than air, and hence, if the course of the
air-gas is downward from the apparatus at which it is produced, the flow
of air into the apparatus and over the surface of the spirit will be
automatically maintained by the "pull" of the descending air-gas when
once the flow has been started until the outlet for the air-gas is
stopped or the spirit in the apparatus is exhausted. Hence, if the
apparatus for saturating air with the vapour of the light petroleum is
placed well above all the points at which the air-gas is to be burnt--
_e.g._, on the roof of the house--the production of the air-gas may
by simple devices become automatic, and the only attention the apparatus
will require will be the replenishing of its reservoir from time to time
with light petroleum. But a number of precautions are required to make
this simple process operate without interruption or difficulty. For
instance, the evaporation of the spirit must not be so rapid relatively
to its total bulk as to lower its temperature, and thereby that of the
overflowing air, too much; the reservoir must be protected from extreme
cold and extreme heat; and the risk of fire from the presence of a highly
volatile and highly inflammable liquid on or near the roof of the house
must be met. This risk is one to which fire insurance companies take
exception.

More commonly, however, air-gas is made non-automatically, or more or
less automatically by the employment of some mechanical means. The light
petroleum, benzol, or other suitable volatile hydrocarbon is volatilised,
where necessary, by the application of gentle heat, while air is driven
over or through it by means of a small motor, which in some cases is a
hot-air engine operated by heat supplied by a flame of the air-gas
produced. These air-gas producers, or at least the reservoir of volatile
hydrocarbon, may be placed in an outbuilding, so that the risk of fire in
the house itself is minimised. They require, however, as much attention
as an acetylene generator, usually more. It is difficult to give reliable
data as to the cost of air-gas, inclusive of the expenses of production.
It varies considerably with the description of hydrocarbon employed, and
its market price. Air-gas is only slightly inferior hygienically to
acetylene, and the colour of its light is that of the incandescent light
as produced by coal-gas or acetylene. Air-gas of a certain grade may be
used for lighting by flat-flame burners, but it has been available thus
for very many years, and has failed to achieve even moderate success. But
the advent of the incandescent burner has completely changed its position
relatively to most other illuminants, and under certain conditions it
seems likely to be the most formidable competitor with acetylene. Since
air-gas, and the numerous chemically identical products offered under
different proprietary names, is simply atmospheric air more or less
loaded with the vapour of a volatile hydrocarbon which is normally
liquid, it possesses no definite chemical constitution, but varies in
composition according to the design of the generating plant, the
atmospheric temperature at the time of preparation, the original degree
of volatility of the hydrocarbon, the remaining degree of volatility
after the more volatile portions have been vaporised, and the speed at
which the air is passed through the carburettor. The illuminating power
and the calorific value of air-gas, unless the manufacture is very
precisely controlled, are apt to be variable, and the amount of light,
emitted, either in self-luminous or in incandescent burners, is somewhat
indeterminate. The generating plant must be so constructed that the air
cannot at any time be mixed with as much hydrocarbon vapour as
constitutes an explosive mixture with it, otherwise the pipes and
apparatus will contain a gas which will forthwith explode if it is
ignited, _i.e._, if an attempt is made to consume it otherwise than
in burners with specially small orifices. The safely permissible mixtures
are (1) air with less hydrocarbon vapour than constitutes an explosive
mixture, and (2) air with more hydrocarbon vapour than constitutes an
explosive mixture. The first of these two mixtures is available for
illuminating purposes only with incandescent mantles, and to ensure a
reasonable margin of safety the mixing apparatus must be so devised that
the proportion of hydrocarbon vapour in the air-gas can never exceed 2
per cent. From Chapter VI. it will be evident that a little more than 2
per cent. of benzene, pentane or benzoline vapour in air forms an
explosive mixture. What is the lowest proportion of such vapours in
admixture with air which will serve on combustion to maintain a mantle in
a state of incandescence, or even to afford a flame at all, does not
appear to have been precisely determined, but it cannot be much below 1-
1/2 per cent. Hence the apparatus for producing air-gas of this first
class must be provided with controlling or governing devices of such
nicety that the proportion of hydrocarbon vapour in the air-gas is
maintained between about 1-1/2 and 2 per cent. It is fair to say that in
normal working conditions a number of devices appear to fulfil this
requirement satisfactorily. The second of the two mixtures referred to
above, viz., air with more hydrocarbon vapour than constitutes an
explosive mixture, is primarily suitable for combustion in self-luminous
burners, but may also be consumed in properly designed incandescent
burners. But the generating apparatus for such air-gas must be equipped
with some governing or controlling device which will ensure the
proportion of hydrocarbon vapour in the mixture never falling below, say,
7 per cent. On the other hand, if saturation of the air with the vapour
is practically attained, should the temperature of the gas fall before it
arrives at the point of combustion, part of the spirit will condense out,
and the product will thus lose part of its illuminating or calorific
intensity, besides partially filling the pipes with liquid products of
condensation. The loss of intensity in the gas during cold weather may or
may not be inconvenient according to circumstances; but the removal of
part of the combustible material brings the residual air-gas nearer to
its limit of explosibility--for it is simply a mixture of combustible
vapour with air, which, normally, is not explosive because the proportion
of spirit is too high--and thus, when led into an atmospheric burner, the
extra amount of air introduced at the injector jets may cause the mixture
to be an explosive mixture of air and spirit, so that it will take fire
within the burner tube instead of burning quietly at the proper orifice.
This matter will be made clearer on studying what is said about explosive
limits in Chapter VI., and what is stated about incandescent acetylene
(carburetted or not) in Chapters IX. and X. Clearly, however, high-grade
air-gas is only suitable for preparation at the immediate spot where it
is to be consumed; it cannot be supplied to a complete district unless it
is intentionally made of such lower intensity that the proportion of
spirit is too small ever to allow of partial deposition in the mains
during the winter.

It is perhaps necessary to refer to the more extended use of candles for
lighting in some few houses in which lamps are disliked on aesthetic, or,
in some cases, ostensibly on hygienic grounds. Candle lighting, speaking
broadly, is either very inadequate so far as ordinary living-rooms are
concerned, or, if adequate, is very costly. Tests specially carried out
by one of the authors to determine some of the figures required in the
ensuing table show that ordinary paraffin or "wax" candles usually emit
about 20 per cent. more light than that given by the standard spermaceti
candle, whose luminosity is the unit by which the intensity of other
lights is reckoned in Great Britain; and also that the light so emitted
by domestic candles is practically unaffected by the sizes--"sixes,"
"eights," or "twelves"--burnt. In the sizes examined the light evolved
has varied between 1.145 and 1.298 "candles," perhaps tending to increase
slightly with the diameter of the candle tested. Hence, to obtain
illumination in a room equal on the average to that afforded by 100
standard candles, or some other light or lights aggregating 100 candle-
power, would require the use of only 80 to 85 ordinary paraffin,
ozokerite, or wax candles. But actually the essential objects in a room
could be equally well illuminated by, say, 30 candles well distributed,
as by two or three incandescent gas-burners, or four or five large oil-
lamps. Lights of high intensity, such as powerful gas-burners or oil-
lamps, must give a higher degree of illumination in their immediate
vicinity than is really necessary, if they are to illuminate adequately
the more distant objects. The dissemination and diffusion of their light
can be greatly aided by suitable colouring of ceilings, walls and
drapings; but unless the illumination by means of lights of relatively
high intensity is made almost wholly indirect, candles or other lights of
low intensity, such as small electric glow-lamps, can, by proper
distribution, be made to give more uniform or more suitably apportioned
illumination. In this respect candles have an economical and, in some
measure, a material advantage over acetylene also. (But when the method
of lighting is by flames--candle or other--the multiplication of the
number of units which is involved when they are of low intensity,
seriously increases the risk of fire through accidental contact of
inflammable material with any one of the flames. This risk is much
greater with naked flames, such as candles, than with, say, inverted
incandescent gas flames, which are to all intents and purposes fully
protected by a closed glass globe.) Hence, in the tabular statement which
follows of the comparative cost, &c., of different illuminants, it will
be assumed that 30 good candles would in practice be equally efficient in
regard to the illumination of a room as large oil-lamps, acetylene
flames, or incandescent gas-burners aggregating 100 candle-power.

For the same reason it will be assumed that electric glow-lamps of low
intensity (nominally of 8 candle-power or less), aggregating 70-80
candle-power, will practically serve, if suitably distributed, equally as
well as 100 candle-power obtained from more powerful sources of light.
Electric glow-lamps of a nominal intensity of 16 candles or thereabouts,
and good flat-flame gas-burners, aggregating 90-95 candle-power, will
similarly be taken as equivalent, if suitably distributed, to 100 candle-
power from more powerful sources of light. Of the latter it will be
assumed that each source has an intensity between 20 and 30 candle-power,
such as is afforded by a large oil-lamp, a No. 1 Welsbach-Kern upturned,
or a "Bijou" inverted incandescent gas-burner, or a 0.70-cubic-foot-per-
hour acetylene burner. Either of these sources of light, when used in
sufficient numbers, so that with proper distribution they light a room
adequately, will be taken in the tabular statement which follows as
affording, per candle-power evolved, the standard illuminating effect
required in that room. The same illuminating effect will be regarded as
attainable by means of candles aggregating only 35 per cent., or small
electric glow-lamps aggregating 77 per cent., or large electric glow-
lamps and flat-flame gas-burners aggregating 90 to 95 per cent. of this
candle-power; while if sources of light of higher intensity are used,
such as Osram or Tantalum electric lamps, or the larger incandescent gas-
burners (the Welsbach "C" or "York," or the Nos. 3 or 4 Welsbach-Kern
upturned, or the No. 1 or larger size inverted burners) or incandescent
acetylene burners, it will be assumed that their aggregate candle-power
must be in excess by about 15 per cent., in order to compensate for the
impossibility of obtaining equally well distributed illumination. These
assumptions are based on general considerations and data as to the effect
of sources of light of different intensities in giving practically the
same degree of illumination in a room; it would occupy too much space
here to discuss more fully the grounds on which they have been made. It
must suffice to say that they have been adopted with the object of being
perfectly fair to each means of illumination.

COST PER HOUR AND HYGIENIC EFFECT OF LIGHTING BY DIFFERENT MEANS

The data (except in the column headed "cost per 100 candle-hours") refer
to the illumination afforded by medium-sized (0.5 to 0.7 cubic foot per
hour) acetylene burners yielding together a light of about 100 candle-
power, and to the approximately equivalent illumination as afforded by
other means of illumination, when the lighting-units or sources of light
are rationally distributed.

Interest and depreciation charges on the outlay on piping or wiring a
house, on brackets, fittings, lamps, candelabra, and storage
accommodation (for carbide and oil) have been taken as equivalent for all
modes of lighting, and omitted in computing the total cost. The cost of
labour for attendance on acetylene plant, oil lamps, and candles is an
uncertain and variable item--approximately equal for all these modes of
lighting, but saved in coal-gas and electric lighting from public supply
mains.

 ______________________________________________________________________
|            |                    |        |         |         |       |
|            |                    |Candle- | Number  |Aggregate| Cost  |
|            |                    |Power of|   of    | Candle- | per   |
|            |  Description of    |  each  |Lighting | Power   | 100   |
|Illuminant. |  Burner or Lamp.   |Lighting|  Units  |Afforded.|Candle-|
|            |                    |  Unit. |Required.|(About.) |Hours. |
|            |                    |(About.)|         |         |Pence. |
|____________|____________________|________|_________|_________|_______|
|            |                    |        |         |         |       |
|            |Self-luminous; 0.5  |        |         |         |       |
|            | cubic foot per hour|  18    |    5    |    90   | 1.11  |
|            |Self-luminous; 0.7  |        |         |         |       |
| Acetylene  | cubic foot per hour|  27    |    4    |   108   | 1.02  |
|            |Self-luminous; 1.0  |        |         |         |       |
|            | cubic foot per hour|  45.5  |    3    |   136   | 0.85  |
|            |Incandescent; 0.5   |        |         |         |       |
|            | cubic foot per hour|  50    |    3    |   150   | 0.49  |
|____________|____________________|________|_________|_________|_______|
|            |                    |        |         |         |       |
| Petroleum  | Large lamp . . . . |  20    |    5    |   100   | 0.84  |
| (paraffin  |                    |        |         |         |       |
|   oil)     | Small lamp . . . . |   5    |   14    |    70   | 1.31  |
|____________|____________________|________|_________|_________|_______|
|            |                    |        |         |         |       |
|            |Flat flame (bad) 5  |        |         |         |       |
|            | cubic feet per hour|   8    |   10    |    80   | 3.75  |
|            |Flat flame (good) 6 |        |         |         |       |
| Coal Gas   | cubic feet per hour|  16    |    6    |    96   | 2.25  |
|            |Incandescent (No. 1 |        |         |         |       |
|            | Kern or Bijou In-  |  25    |    4    |   100   | 0.38  |
|            | verted); 1-1/2     |        |         |         |       |
|            | cubic feet per hour|        |         |         |       |
|____________|____________________|________|_________|_________|_______|
|            |                    |        |         |         |       |
| Candles    |"Wax" (so-called) . |   1.2  |   30    |    35   | 6.14  |
|____________|____________________|________|_________|_________|_______|
|            |                    |        |         |         |       |
|            | Small glow . . . . |   7    |   11    |    77   | 2.81  |
|            | Large glow . . . . |  13    |    7    |    91   | 2.90  |
| Electricity|                    |        |         |         |       |
|            | Tantalum . . . . . |  19    |    5    |    95   | 1.52  |
|            | Osram  . . . . . . |  14    |    7    |    98   | 1.00  |
|____________|____________________|________|_________|_________|_______|

 ___________________________________________________________________
|            |                    |                    |            |
|            |                    |                    |            |
|            |                    |                    | Equivalent |
|            |  Description of    |   Assumed Cost     |  Illumin-  |
|Illuminant. |  Burner or Lamp.   |  of Illuminant.    |   ation.   |
|            |                    |                    |   Pence.   |
|            |                    |                    |            |
|____________|____________________|____________________|____________|
|            |                    |                    |            |
|            |Self-luminous; 0.5  | Calcium carbide    |            |
|            | cubic foot per hour|  (yielding 5       |    1.00    |
|            |Self-luminous; 0.7  |  cubic feet of     |            |
| Acetylene  | cubic foot per hour|  acetylene per     |    1.10    |
|            |Self-luminous; 1.0  |  lb.) at 15s.      |            |
|            | cubic foot per hour|  per cwt., inclu-  |    1.16    |
|            |Incandescent; 0.5   |  ding delivery     |            |
|            | cubic foot per hour|  charges.          |    0.74    |
|____________|____________________|____________________|____________|
|            |                    |                    |            |
| Petroleum  | Large lamp . . . . | Oil, 9d. per gal-  |    0.84    |
| (paraffin  |                    |  lon, including    |            |
|   oil)     | Small lamp . . . . |  delivery charges. |    0.92    |
|____________|____________________|____________________|____________|
|            |                    |                    |            |
|            |Flat flame (bad) 5  |                    |            |
|            | cubic feet per hour| Public supply      |    3.00    |
|            |Flat flame (good) 6 |  from small        |            |
| Coal Gas   | cubic feet per hour|  country works,    |    2.16    |
|            |Incandescent (No. 1 |  at 5s. per 1000   |            |
|            | Kern or Bijou In-  |  cubic feet.       |    0.38    |
|            | verted); 1-1/2     |                    |            |
|            | cubic feet per hour|                    |            |
|____________|____________________|____________________|____________|
|            |                    |                    |            |
| Candles    |"Wax" (so-called) . | 5d. per lb.        |    2.60    |
|____________|____________________|____________________|____________|
|            |                    |                    |            |
|            | Small glow . . . . | Public supply      |    2.16    |
|            | Large glow . . . . |  from small        |    2.64    |
| Electricity|                    |  town works        |            |
|            | Tantalum . . . . . |  at 6d. per        |    1.45    |
|            | Osram  . . . . . . |  B.O.T. unit.      |    0.98    |
|____________|____________________|____________________|____________|

 _______________________________________________________________________
|            |                    |      |         |          |         |
|            |                    |Inci- | Exhaus- |Vitiation |  Heat   |
|            |                    | den- | tion of | of Air.  |Produced.|
|            |  Description of    | tal  |Air.Cubic|Cubic Feet|Number of|
|Illuminant. |  Burner or Lamp.   |Expen-|Feet Dep-| of Car-  |Units of |
|            |                    | ces. |rived of |bonic Acid|  Heat.  |
|            |                    |      | Oxygen. | Formed.  |Calories.|
|____________|____________________|______|_________|__________|_________|
|            |                    |      |         |          |         |
|            |Self-luminous; 0.5  |      |         |          |         |
|            | cubic foot per hour| [1]  |   29.8  |   5.0    |   900   |
|            |Self-luminous; 0.7  |      |         |          |         |
| Acetylene  | cubic foot per hour|      |   33.3  |   5.6    |  1010   |
|            |Self-luminous; 1.0  |      |         |          |         |
|            | cubic foot per hour|      |   35.7  |   6.0    |  1000   |
|            |Incandescent; 0.5   |      |         |          |         |
|            | cubic foot per hour| [2]  |   17.9  |   3.0    |   545   |
|____________|____________________|______|_________|__________|_________|
|            |                    |      |         |          |         |
| Petroleum  | Large lamp . . . . |      |  140.0  |  19.6    |  3630   |
| (paraffin  |                    | [3]  |         |          |         |
|   oil)     | Small lamp . . . . |      |  154.0  |  21.6    |  4000   |
|____________|____________________|______|_________|__________|_________|
|            |                    |      |         |          |         |
|            |Flat flame (bad) 5  |      |         |          |         |
|            | cubic feet per hour| Nil  |  270.0  |  27.0    |  7750   |
|            |Flat flame (good) 6 |      |         |          |         |
| Coal Gas   | cubic feet per hour| Nil  |  195.0  |  19.5    |  5580   |
|            |Incandescent (No. 1 |      |         |          |         |
|            | Kern or Bijou In-  | [4]  |   27.0  |   2.7    |   775   |
|            | verted); 1-1/2     |      |         |          |         |
|            | cubic feet per hour|      |         |          |         |
|____________|____________________|______|_________|__________|_________|
|            |                    |      |         |          |         |
| Candles    |"Wax" (so-called) . | Nil  |  100.5  |   13.7   |  2700   |
|____________|____________________|______|_________|__________|_________|
|            |                    |      |         |          |         |
|            | Small glow . . . . |2s.6d.|   Nil   |    Nil   |   285   |
|            | Large glow . . . . |2s.6d.|    "    |     "    |   360   |
| Electricity|                    | [5]  |         |          |         |
|            | Tantalum . . . . . |7s.6d.|    "    |     "    |   172   |
|            | Osram  . . . . . . | 6s.  |    "    |     "    |    96   |
|____________|____________________|______|_________|__________|_________|

[Footnote 1: Interest and depreciation charges on generating and
purifying plant = 0.15 penny. Purifying material and burner renewals =
0.05 penny.]

[Footnote 2: Mantle renewals as for coal-gas.]

[Footnote 3: Renewals of wicks and chimneys = 0.02 penny.]

[Footnote 4: Renewals and mantles (and chimneys) at contract rate of 3s.
per burner per annum.]

[Footnote 5: Renewals of lamps and fuses, at price indicated per lamp per
annum.]

The conventional method of making pecuniary comparisons between different
sources of artificial light consists in simply calculating the cost of
developing a certain number of candle-hours of light--_i.e._, a
certain amount of standard candle-power for a given number of hours--on
the assumption that as many separate sources of light are employed as may
be required to bring the combined illuminating power up to the total
amount wanted. In view of the facts as to dissemination and diffusion, or
the difference between sheer illuminating power and useful illuminating
effect, which have just been elaborated, and in view of the different
intensities of the different unit sources of light (which range from the
single candle to a powerful large incandescent gas-burner or a metallic
filament electric lamp), such a method of calculation is wholly illusory.
The plan adopted in the following table may also appear unnecessarily
complicated; but it is not so to the reader if he remembers that the
apparently various amount of illumination is corrected by the different
numbers of illuminating units until the amount of simple candle-power
developed, whatever illuminant be employed, suffices to light a room
having an area of about 300 square feet (_i.e._, a room, 17-1/2 feet
square, or one 20 feet long by 15 feet wide), so that ordinary print may
be read comfortably in any part of the room, and the titles of books,
engravings, &c., in any position on the walls up to a height of 8 feet
from the ground may be distinguished with ease. The difference in cost,
&c., of a greater or less degree of illumination, or of lighting a larger
or smaller room by acetylene or any other of the illuminants named, will
be almost directly proportional to the cost given for the stated
conditions. Nevertheless, it should be recollected that when the
conventional system is retained--useful illuminating effect being
sacrificed to absolute illuminating power--acetylene is made to appear
cheaper in comparison with all weaker unit sources of light, and dearer
in comparison with all stronger unit sources of light than the
accompanying table indicates it to be. In using the comparative figures
given in the table, it should be borne in mind that they refer to more
general and more brilliant illumination of a room than is commonly in
vogue where the lighting is by means of electric light, candles, or oil-
lamps. The standard of illumination adopted for the table is one which is
only gaining general recognition where incandescent gas or acetylene
lighting is available, though in exceptional cases it has doubtless been
attained by means of oil-lamps or flat-flame gas-burners, but very rarely
if ever by means of carbon-filament electric glow-lamps, or candles. It
assumes that the occupants of a room do not wish to be troubled to bring
work or book "to the light," but wish to be able to work or read
wheresoever in the room they will, without consideration of the
whereabouts of the light or lights.

It should, perhaps, be added that so high a price as 5s. per 1000
cubic feet for coal-gas rarely prevails in Great Britain, except in small
outlying towns, whereas the price of 6d. per Board of Trade unit
for electricity is not uncommonly exceeded in the few similar country
places in which there is a public electricity supply.



CHAPTER II

THE PHYSICS AND CHEMISTRY OF THE REACTION BETWEEN CARBIDE AND WATER

THE NATURE OF CALCIUM CARBIDE.--The raw material from which, by
interaction with water, acetylene is obtained, is a solid body called
calcium carbide or carbide of calcium. Inasmuch as this substance can at
present only be made on a commercial scale in the electric furnace--and
so far as may be foreseen will never be made on a large scale except by
means of electricity--inasmuch as an electric furnace can only be worked
remuneratively in large factories supplied with cheap coal or water
power; and inasmuch as there is no possibility of the ordinary consumer
of acetylene ever being able to prepare his own carbide, all descriptions
of this latter substance, all methods of winning it, and all its
properties except those which concern the acetylene-generator builder or
the gas consumer have been omitted from the present book. Hitherto
calcium carbide has found but few applications beyond that of evolving
acetylene on treatment with water or some aqueous liquid, hygroscopic
solid, or salt containing water of crystallisation; but it has
possibilities of further employment, should its price become suitable,
and a few words will be devoted to this branch of the subject in Chapter
XII. Setting these minor uses aside, calcium carbide has no intrinsic
value except as a producer of acetylene, and therefore all its
characteristics which interest the consumer of acetylene are developed
incidentally throughout this volume as the necessity for dealing with
them arises.

It is desirable, however, now to discuss one point connected with solid
carbide about which some misconception prevails. Calcium carbide is a
body which evolves an inflammable, or on occasion an explosive, gas when
treated with water; and therefore its presence in a building has been
said to cause a sensible increase in the fire risk because attempts to
extinguish a fire in the ordinary manner with water may cause evolution
of acetylene which should determine a further production of flame and
heat. In the absence of water, calcium carbide is absolutely inert as
regards fire; and on several occasions drums of it have been recovered
uninjured from the basement of a house which has been totally destroyed
by fire. With the exception of small 1-lb. tins of carbide, used only by
cyclists, &c., the material is always put into drums of stout sheet-iron
with riveted or folded seams. Provided the original lid has not been
removed, the drums are air- and water-tight, so that the fireman's hose
may be directed upon them with impunity. When a drum has once been
opened, and not all of its contents have been put into the generator,
ordinary caution--not merely as regards fire, but as regards the
deterioration of carbide when exposed to the atmosphere--suggests either
that the lid must be made air-tight again (not by soldering it),
[Footnote: Carbide drums are not uncommonly fitted with self-sealing or
lever-top lids, which are readily replaced hermetically tight after
opening and partial removal of the contents of the drum.] or preferably
that the rest of the carbide shall be transferred to some convenient
receptacle which can be perfectly closed. [Footnote: It would be a
refinement of caution, though hardly necessary in practice, to fit such a
receptacle with a safety-valve. If then the vessel were subjected to
sudden or severe heating, the expansion of the air and acetylene in it
could not possibly exert a disruptive effect upon the walls of the
receptacle, which, in the absence of the safety-valve, is imaginable.]
Now, assuming this done, the drums are not dependent upon soft solder to
keep them sound, and so they cannot open with heat. Fire and water,
accordingly, cannot affect them, and only two risks remain: if stored in
the basement of a tall building, falling girders, beams or brickwork may
burst them; or if stored on an upper floor, they may fall into the
basement and be burst with the shock--in either event water then having
free access to the contents. But drums of carbide would never be stored
in such positions: a single one would be kept in the generator-house;
several would be stored in a separate room therein, or in some similar
isolated shed. The generator-house or shed would be of one story only;
the drums could neither fall nor have heavy weights fall on them during a
fire; and therefore there is no reason why, if a fire should occur, the
firemen should not be permitted to use their hose in the ordinary
fashion. Very similar remarks apply to an active acetylene generator.
Well built, such plant will stand much heat and fire without failure; if
it is non-automatic, and of combustible materials contains nothing but
gas in the holder, the worst that could happen in times of fire would be
the unsealing of the bell or its fracture, and this would be followed,
not at all by any explosion, but by a fairly quiet burning of the
escaping gas, which would be over in a very short time, and would not add
to the severity of the conflagration unless the generator-house were so
close to the residence that the large flame of burning gas could ignite
part of the main building. Even if the heat were so great near the holder
that the gas dissociated, it is scarcely conceivable that a dangerous
explosion should arise. But it is well to remember, that if the
generator-house is properly isolated from the residence, if it is
constructed of non-inflammable materials, if the attendant obeys
instructions and refrains from taking a naked light into the
neighbourhood of the plant, and if the plant itself is properly designed
and constructed, a fire at or near an acetylene generator is extremely
unlikely to occur. At the same time, before the erection of plant to
supply any insured premises is undertaken, the policy or the company
should be consulted to ascertain whether the adoption of acetylene
lighting is possibly still regarded by the insurers as adding an extra
risk or even as vitiating the whole insurance.

REGULATIONS FOR THE STORAGE OF CARBIDE: BRITISH.--There are also certain
regulations imposed by many local authorities respecting the storage of
carbide, and usually a licence for storage has to be obtained if more
than 5 lb. is kept at a time. The idea of the rule is perfectly
justifiable, and it is generally enforced in a sensible spirit. As the
rules may vary in different localities, the intending consumer of
acetylene must make the necessary inquiries, for failure to comply with
the regulations may obviously be followed by unpleasantness.

Having regard to the fact that, in virtue of an Order in Council dated
July 7, 1897, carbide may be stored without a licence only in separate
substantial hermetically closed metal vessels containing not more than 1
lb. apiece and in quantities not exceeding 5 lb. in the aggregate, and
having regard also to the fact that regulations are issued by local
authorities, the Fire Offices' Committee of the United Kingdom has not up
to the present deemed it necessary to issue special rules with reference
to the storage of carbide of calcium.

The following is a copy of the rules issued by the National Board of Fire
Underwriters of the UNITED STATES OF AMERICA for the storage of calcium
carbide on insured premises:

RULES FOR THE STORAGE OF CALCIUM CARBIDE.

(_a_) Calcium carbide in quantities not to exceed six hundred (600)
pounds may be stored, when contained in approved metal packages not to
exceed one hundred (100) pounds each, inside insured property, provided
that the place of storage be dry, waterproof and well ventilated, and
also provided that all but one of the packages in any one building shall
be sealed and the seals shall not be broken so long as there is carbide
in excess of one (1) pound in any other unsealed package in the building.

(_b_) Calcium carbide in quantities in excess of six hundred (600)
pounds must be stored above ground in detached buildings, used
exclusively for the storage of calcium carbide, in approved metal
packages, and such buildings shall be constructed to be dry, waterproof
and well ventilated.

(_c_) Packages to be approved must be made of metal of sufficient
strength to insure handling the package without rupture, and be provided
with a screwed top or its equivalent.

They must be constructed so as to be water- and air-tight without the use
of solder, and conspicuously marked "CALCIUM CARBIDE--DANGEROUS IF NOT
KEPT DRY."

The following is a summary of the AUSTRIAN GOVERNMENT rules relating to
the storage and handling of carbide:

(1) It must be sold and stored only in closed water-tight vessels, which,
if the contents exceed 10 kilos., must be marked in plain letters
"CALCIUM CARBIDE--TO BE KEPT CLOSED AND DRY." They must not be of copper
and if soldered must be opened by mechanical means and not by
unsoldering. They must be stored out of the reach of water.

(2) Quantities not exceeding 300 kilos. may be stored in occupied houses,
provided the single drums do not exceed 100 kilos. nominal capacity. The
storage-place must be dry and not underground.

(3) The limits specified in Rule 2 apply also to generator-rooms, with
the proviso also that in general the amount stored shall not exceed five
days' consumption.

(4) Quantities ranging from 300 to 1000 kilos. must be stored in special
well-ventilated uninhabited non-basement rooms in which lights and
smoking are not allowed.

(5) Quantities exceeding 1000 kilos. must be stored in isolated fireproof
magazines with light water-tight roofs. The floors must be at least 8
inches above ground-level.

(6) Carbide in water-tight drums may be stored in the open in a fenced
enclosure at least 30 feet from buildings, adjoining property, or
inflammable materials. The drums must be protected from wet by a light
roof.

(7) The breaking of carbide must be done by men provided with respirators
and goggles, and care taken to avoid the formation of dust.

(8) Local or other authorities will issue from time to time special
regulations in regard to carbide trade premises.

The ITALIAN GOVERNMENT rules relating to the storage and transport of
carbide follow in the main those of the Austrian Government, but for
quantities between 300 and 2000 kilos sanction is required from the local
authorities, and for larger quantities from superior authorities. The
storage of quantities ranging from 300 to 2000 kilos is forbidden in
dwelling-houses and above the latter quantity the storage-place must be
isolated and specially selected. No special permit is required for the
storage of quantities not exceeding 300 kilos. Workmen exposed to carbide
dust arising from the breaking of carbide or otherwise must have their
eyes and respiratory organs suitably protected.

THE PURCHASE OF CARBIDE.--Since calcium carbide is only useful as a means
of preparing acetylene, it should be bought under a guarantee (1) that it
contains less impurities than suffice to render the crude gas dangerous
in respect of spontaneous inflammability, or objectionable in a manner to
be explained later on, when consumed; and (2) that it is capable of
evolving a fixed minimum quantity of acetylene when decomposed by water.
Such determination, however, cannot be carried out by the ordinary
consumer for himself. A generator which is perfectly satisfactory in
general behaviour, and which evolves a sufficient proportion of the
possible total make of gas to be economical, does not of necessity
decompose the carbide quantitatively; nor is it constructed in a fashion
to render an exact measurement of the gas liberated at standard
temperature and pressure easy to obtain. For obvious reasons the careful
consumer of acetylene will keep a record of the carbide decomposed and of
the acetylene generated--the latter perhaps only in terms of burner-
hours, or the like; but in the event of serious dispute as to the gas-
making capacity of his raw material, he must have a proper analysis made
by a qualified chemist.

Calcium carbide is crushed by the makers into several different sizes, in
each of which all the lumps exceed a certain size and are smaller than
another size. It is necessary to find out by experiment, or from the
maker, what particular size suits the generator best, for different types
of apparatus require different sizes of carbide. Carbide cannot well be
crushed by the consumer of acetylene. It is a difficult operation, and
fraught with the production of dust which is harmful to the eyes and
throat, and if done in open vessels the carbide deteriorates in gas-
making power by its exposure to the moisture of the atmosphere. True dust
in carbide is objectionable, and practically useless for the generation
of acetylene in any form of apparatus, but carbide exceeding 1 inch in
mesh is usually sold to satisfy the suggestions of the British Acetylene
Association, which prescribes 5 per cent, of dust as the maximum. Some
grades of carbide are softer than others, and therefore tend to yield
more dust if exposed to a long journey with frequent unloadings.

There are certain varieties of ordinary carbide known as "treated
carbide," the value of which is more particularly discussed in Chapter
III. The treatment is of two kinds, or of a combination of both. In one
process the lumps are coated with a strong solution of glucose, with the
object of assisting in the removal of spent lime from their surface when
the carbide is immersed in water. Lime is comparatively much more soluble
in solutions of sugar (to which class of substances glucose belongs) than
in plain water; so that carbide treated with glucose is not so likely to
be covered with a closely adherent skin of spent lime when decomposed by
the addition of water to it. In the other process, the carbide is coated
with or immersed in some oil or grease to protect it from premature
decomposition. The latter idea, at least, fulfils its promises, and does
keep the carbide to a large extent unchanged if the lumps are exposed to
damp air, while solving certain troubles otherwise met with in some
generators (cf. Chapter III.); but both operations involve additional
expense, and since ordinary carbide can be used satisfactorily in a good
fixed generator, and can be preserved without serious deterioration by
the exercise of reasonable care, treated carbide is only to be
recommended for employment in holderless generators, of which table-lamps
are the most conspicuous forms. A third variant of plain carbide is
occasionally heard of, which is termed "scented" carbide. It is difficult
to regard this material seriously. In all probability calcium carbide is
odourless, but as it begins to evolve traces of gas immediately
atmospheric moisture reaches it, a lump of carbide has always the
unpleasant smell of crude acetylene. As the material is not to be stored
in occupied rooms, and as all odour is lost to the senses directly the
carbide is put into the generator, scented carbide may be said to be
devoid of all utility.

THE REACTION BETWEEN CARBIDE AND WATER.--The reaction which occurs when
calcium carbide and water are brought into contact belongs to the class
that chemists usually term double decompositions. Calcium carbide is a
chemical compound of the metal calcium with carbon, containing one
chemical "part," or atomic weight, of the former united to two chemical
parts, or atomic weights, of the latter; its composition expressed in
symbols being CaC_2. Similarly, water is a compound of two chemical parts
of hydrogen with one of oxygen, its formula being H_2O. When those two
substances are mixed together the hydrogen of the water leaves its
original partner, oxygen, and the carbon of the calcium carbide leaves
the calcium, uniting together to form that particular compound of
hydrogen and carbon, or hydrocarbon, which is known as acetylene, whose
formula is C_2H_2; while the residual calcium and oxygen join together to
produce calcium oxide or lime, CaO. Put into the usual form of an
equation, the reaction proceeds thus--

(1) CaC_2 + H_2O = C_2H_2 + CaO.

This equation not only means that calcium carbide and water combine to
yield acetylene and lime, it also means that one chemical part of carbide
reacts with one chemical part of water to produce one chemical part of
acetylene and one of lime. But these four chemical parts, or molecules,
which are all equal chemically, are not equal in weight; although,
according to a common law of chemistry, they each bear a fixed proportion
to one another. Reference to the table of "Atomic Weights" contained in
any text-book of chemistry will show that while the symbol Ca is used,
for convenience, as a contraction or sign for the element calcium simply,
it bears a more important quantitative significance, for to it will be
found assigned the number 40. Against carbon will be seen the number 12;
against oxygen, 16; and against hydrogen, 1. These numbers indicate that
if the smallest weight of hydrogen ever found in a chemical compound is
called 1 as a unit of comparison, the smallest weights of calcium,
carbon, and oxygen, similarly taking part in chemical reactions are 40,
12, and 16 respectively. Thus the symbol CaC_2, comes to convoy three
separate ideas: (_a_) that the substance referred to is a compound
of calcium and carbon only, and that it is therefore a carbide of
calcium; (_b_) that it is composed of one chemical part or atom of
calcium and two atoms of carbon; and (_c_) that it contains 40 parts
by weight of calcium combined with twice twelve, or 24, parts of carbon.
It follows from (_c_) that the weight of one chemical part, now
termed a molecule as the substance is a compound, of calcium carbide is
(40 + 2 x 12) = 64. By identical methods of calculation it will be found
that the weight of one molecule of water is 18; that of acetylene, 26;
and that of lime, 56. The general equation (1) given above, therefore,
states in chemical shorthand that 64 parts by weight of calcium carbide
react with 18 parts of water to give 26 parts by weight of acetylene and
56 parts of lime; and it is very important to observe that just as there
are the same number of chemical parts, viz., 2, on each side, so there
are the same number of parts by weight, for 64 + 18 = 56 + 26 = 82. Put
into other words equation (1) shows that if 64 grammes, lb., or cwts. of
calcium carbide are treated with 18 grammes, lb., or cwts. of water, the
whole mass will be converted into acetylene and lime, and the residue
will not contain any unaltered calcium carbide or any water; whence it
may be inferred, as is the fact, that if the weights of carbide and water
originally taken do not stand to one another in the ratio 64 : 18, both
substances cannot be entirely decomposed, but a certain quantity of the
one which was in excess will be left unattacked, and that quantity will
be in exact accordance with the amount of the said excess--indifferently
whether the superabundant substance be carbide or water.

Hitherto, for the sake of simplicity, the by-product in the preparation
of acetylene has been described as calcium oxide or quicklime. It is,
however, one of the leading characteristics of this body to be
hygroscopic, or greedy of moisture; so that if it is brought into the
presence of water, either in the form of liquid or as vapour, it
immediately combines therewith to yield calcium hydroxide, or slaked
lime, whose chemical formula is Ca(OH)_2. Accordingly, in actual
practice, when calcium carbide is mixed with an excess of water, a
secondary reaction takes place over and above that indicated by equation
(1), the quicklime produced combining with one chemical part or molecule
of water, thus--

CaO + H_2O = Ca(OH)_2.

As these two actions occur simultaneously, it is more usual, and more in
agreement with the phenomena of an acetylene generator, to represent the
decomposition of calcium carbide by the combined equation--

(2) CaC_2 + 2H_2O = C_2H_2 + Ca(OH)_2.

By the aid of calculations analogous to those employed in the preceding
paragraph, it will be noticed that equation (2) states that 1 molecule of
calcium carbide, or 64 parts by weight, combines with 2 molecules of
water, or 36 parts by weight, to yield 1 molecule, or 26 parts by weight
of acetylene, and 1 molecule, or 74 parts by weight of calcium hydroxide
(slaked lime). Here again, if more than 36 parts of water are taken for
every 64 parts of calcium carbide, the excess of water over those 36
parts is left undecomposed; and in the same fashion, if less than 36
parts of water are taken for every 64 parts of calcium carbide, some of
the latter must remain unattacked, whilst, obviously, the amount of
acetylene liberated cannot exceed that which corresponds with the
quantity of substance suffering complete decomposition. If, for example,
the quantity of water present in a generator is more than chemically
sufficient to attack all the carbide added, however largo or small that
excess may be, no more, and, theoretically speaking, no less, acetylene
can ever be evolved than 26 parts by weight of gas for every 64 parts by
weight of calcium carbide consumed. It is, however, not correct to invert
the proposition, and to say that if the carbide is in excess of the water
added, no more, and, theoretically speaking, no less, acetylene can ever
be evolved than 26 parts by weight of gas for every 36 parts of water
consumed, as might be gathered from equation (2); because equation (1)
shows that 26 parts of acetylene may, on occasion, be produced by the
decomposition of 18 parts by weight of water. From the purely chemical
point of view this apparent anomaly is explained by the circumstance that
of the 36 parts of water present on the left-hand aide of equation (2),
only one-half, _i.e._, 18 parts by weight, are actually decomposed
into hydrogen and oxygen, the other 18 parts remaining unattacked, and
merely attaching themselves as "water of hydration" to the 56 parts of
calcium oxide in equation (1) so as to produce the 74 parts of calcium
hydroxide appearing on the right-hand side of equation (2). The matter is
perhaps rendered more intelligible by employing the old name for calcium
hydroxide or slaked lime, viz., hydrated oxide of calcium, and by writing
its formula in the corresponding form, when equation (2) becomes

CaC_2 + 2H_2O = C_2H_2 + CaO.H_2O.

It is, therefore, absolutely correct to state that if the amount of
calcium carbide present in an acetylene generator is more than chemically
sufficient to decompose all the water introduced, no more, and
theoretically speaking no less, acetylene can ever be liberated than 26
parts by weight of gas for every 18 parts by weight of water attacked.
This, it must be distinctly understood, is the condition of affairs
obtaining in the ideal acetylene generator only; since, for reasons which
will be immediately explained, when the output of gas is measured in
terms of the water decomposed, in no commercial apparatus, and indeed in
no generator which can be imagined fit for actual employment, does that
output of gas ever approach the quantitative amount; but the volume of
water used, if not actually disappearing, is always vastly in excess of
the requirements of equation (2). On the contrary, when the make of gas
is measured in terms of the calcium carbide consumed, the said make may,
and frequently does, reach 80, 90, or even 99 per cent. of what is
theoretically possible. Inasmuch as calcium carbide is the one costly
ingredient in the manufacture of acetylene, so long as it is not wasted--
so long, that is to say, as nearly the theoretical yield of gas is
obtained from it--an acetylene generator is satisfactory or efficient in
this particular; and except for the matter of solubility discussed in the
following chapter, the quantity of water consumed is of no importance
whatever.

HEAT EVOLVED IN THE REACTION.--The chemical reaction between calcium
carbide and water is accompanied by a large evolution of heat, which,
unless due precautions are taken to prevent it, raises the temperature of
the substances employed, and of the apparatus containing them, to a
serious and often inconvenient extent. This phenomenon is the most
important of all in connexion with acetylene manufacture; for upon a
proper recognition of it, and upon the character of the precautions taken
to avoid its numerous evil effects, depend the actual value and capacity
for smooth working of any acetylene generator. Just as, by an immutable
law of chemistry, a given weight of calcium carbide yields a given weight
of acetylene, and by no amount of ingenuity can be made to produce either
more or less; so, by an equally immutable law of physics, the
decomposition of a given weight of calcium carbide by water, or the
decomposition of a given weight of water by calcium carbide, yields a
perfectly definite quantity of heat--a quantity of heat which cannot be
reduced or increased by any artifice whatever. The result of a production
of heat is usually to raise the temperature of the material in which it
is produced; but this is not always the case, and indeed there is no
necessary connexion or ratio between the quantity of heat liberated in
any form of chemical reaction--of which ordinary combustion is the
commonest type--and the temperature attained by the substances concerned.
This matter has so weighty a bearing upon acetylene generation, and
appears to be so frequently misunderstood, that a couple of illustrations
may with advantage be studied. If a vessel full of cold water, and
containing also a thermometer, is placed over a lighted gas-burner, at
first the temperature of the liquid rises steadily, and there is clearly
a ratio between the size of the flame and the speed at which the mercury
mounts up the scale. Finally, however, the thermometer indicates a
certain point, viz., 100° C, and the water begins to boil; yet although
the burner is untouched, and consequently, although heat must be passing
into the vessel at the same rate as before, the mercury refuses to move
as long as any liquid water is left. By the use of a gas meter it might
be shown that the same volume of gas is always consumed (_a_) in
raising the temperature of a given quantity of cold water to the boiling-
point, and another equally constant volume of gas is always consumed
(_b_) in causing the boiling water to disappear as steam. Hence, as
coal-gas is assumed for the present purpose to possess invariably the
same heating power, it appears that the same quantity of heat is always
needed to convert a given amount of cold water at a certain temperature
into steam; but inasmuch as reference to the meter would show that about
5 times the volume of gas is consumed in changing the boiling water into
steam as is used in heating the cold water to the boiling-point, it will
be evident that the temperature of the mass is raised as high by the heat
evolved during the combustion of one part of gas as it is by that
liberated on the combustion of 6 times that amount.

A further example of the difference between quantity of heat and sensible
temperature may be seen in the combustion of coal, for (say) one
hundredweight of that fuel might be consumed in a very few minutes in a
furnace fitted with a powerful blast of air, the operation might be
spread over a considerable number of hours in a domestic grate, or the
coal might be allowed to oxidise by exposure to warm air for a year or
more. In the last case the temperature might not attain that of boiling
water, in the second it would be about that of dull redness, and in the
first it would be that of dazzling whiteness; but in all three cases the
total quantity of heat produced by the time the coal was entirely
consumed would be absolutely identical. The former experiment with water
and a gas-burner, too, might easily be modified to throw light upon
another problem in acetylene generation, for it would be found that if
almost any other liquid than water were taken, less gas (_i.e._, a
smaller quantity of heat) would be required to raise a given weight of it
from a certain low to a certain high temperature than in the case of
water itself; while if it were possible similarly to treat the same
weight of iron (of which acetylene generators are constructed), or of
calcium carbide, the quantity of heat used to raise it through a given
number of thermometric degrees would hardly exceed one-tenth or one-
quarter of that needed by water itself. In technical language this
difference is due to the different specific heats of the substances
mentioned; the specific heat of a body being the relative quantity of
heat consumed in raising a certain weight of it a certain number of
degrees when the quantity of heat needed to produce the same effect on
the same weight of water is called unity. Thus, the specific heat of
water being termed 1.0, that of iron or steel is 0.1138, and that of
calcium carbide 0.247, [Footnote: This is Carlson's figure. Morel has
taken the value 0.103 in certain calculations.] both measured at
temperatures where water is a liquid. Putting the foregoing facts in
another shape, for a given rise in temperature that substance will absorb
the most heat which has the highest specific heat, and therefore, in this
respect, 1 part by weight of water will do the work of roughly 9 parts by
weight of iron, and of about 4 parts by weight of calcium carbide.

From the practical aspect what has been said amounts to this: During the
operation of an acetylene generator a large amount of heat is produced,
the quantity of which is beyond human control. It is desirable, for
various reasons, that the temperature shall be kept as low as possible.
There are three substances present to which the heat may be compelled to
transfer itself until it has opportunity to pass into the surrounding
atmosphere: the material of which the apparatus is constructed, the gas
which is in process of evolution, and whichever of the two bodies--
calcium carbide or water--is in excess in the generator. Of these, the
specific heat at constant pressure of acetylene has unfortunately not yet
been determined, but its relative capacity for absorbing heat is
undoubtedly small; moreover the gas could not be permitted to become
sufficiently hot to carry off the heat without grave disadvantages. The
specific heat of calcium carbide is also comparatively small, and there
are similar disadvantages in allowing it to become hot; moreover it is
deficient in heat-conducting power, so that heat communicated to one
portion of the mass does not extend rapidly throughout, but remains
concentrated in one spot, causing the temperature to rise objectionably.
Steel has a sufficient amount of heat-conducting power to prevent undue
concentration in one place; but, as has been stated, its specific heat is
only one-ninth that of water. Water is clearly, therefore, the proper
substance to employ for the dissipation of the heat generated, although
it is strictly speaking almost devoid of heat-conducting power; for not
only is the specific heat of water much greater than that of any other
material present, but it possesses in a high degree the faculty of
absorbing heat throughout its mass, by virtue of the action known as
convection, provided that heat is communicated to it at or near the
bottom, and not too near its upper surface. Moreover, water is a much
more valuable substance for dissipating heat than appears from the
foregoing explanation; for reference to the experiment with the gas-
burner will show that six and a quarter times as much heat can be
absorbed by a given weight of water if it is permitted to change into
steam, as if it is merely raised to the boiling-point; and since by no
urging of the gas-burner can the temperature be raised above 100° C. as
long as any liquid water remains unevaporated, if an excess of water is
employed in an acetylene generator, the temperature inside can never--
except quite locally--exceed 100° C., however fast the carbide be
decomposed. An indefinitely large consumption of water by evaporation in
a generator matters nothing, for the liquid may be considered of no
pecuniary value, and it can all be recovered by condensation in a
subsequent portion of the plant.

It has been said that the quantity of heat liberated when a certain
amount of carbide suffers decomposition is fixed; it remains now to
consider what that quantity is. Quantities of heat are always measured in
terms of the amount needed to raise a certain weight of water a certain
number of degrees on the thermometric scale. There are several units in
use, but the one which will be employed throughout this book is the
"Large Calorie"; a large calorie being the amount of heat absorbed in
raising 1 kilogramme of water 1° C. Referring for a moment to what has
been said about specific heats, it will be apparent that if 1 large
calorie is sufficient to heat 1 kilo, of water through 1° C. the same
quantity will heat 1 kilo. of steel, whose specific heat is roughly 0.11,
through (10/011) = 9° C., or, which comes to the same thing, will heat 9
kilos, of steel through 1° C.; and similarly, 1 large calorie will raise
4 kilos. of calcium carbide 1° C. in temperature, or 1 kilo. 4° C. The
fact that a definite quantity of heat is manifested when a known weight
of calcium carbide is decomposed by water is only typical; for in every
chemical process some disturbance of heat, though not necessarily of
sensible (or thermometric) character, occurs, heat being either absorbed
or set free. Moreover, if when given weights of two or more substances
unite to form a given weight of another substance, a certain quantity of
heat is set free, precisely the same amount of heat is absorbed, or
disappears, when the latter substance is decomposed to form the same
quantities of the original substances; and, _per contra_, if the
combination is attended by a disappearance of heat, exactly the same
amount is liberated when the compound is broken up into its first
constituents. Compounds are therefore of two kinds: those which absorb
heat during their preparation, and consequently liberate heat when they
are decomposed--such being termed endothermic; and those which evolve
heat during their preparation, and consequently absorb heat when they are
decomposed--such being called exothermic. If a substance absorbs heat
during its formation, it cannot be produced unless that heat is supplied
to it; and since heat, being a form of motion, is equally a form of
energy, energy must be supplied, or work must be done, before that
substance can be obtained. Conversely, if a substance evolves heat during
its formation, its component parts evolve energy when the said substance
is being produced; and therefore the mere act of combination is
accompanied by a facility for doing work, which work may be applied in
assisting some other reaction that requires heat, or may be usefully
employed in any other fashion, or wasted if necessary. Seeing that there
is a tendency in nature for the steady dissipation of energy, it follows
that an exothermic substance is stable, for it tends to remain as it is
unless heat is supplied to it, or work is done upon it; whereas,
according to its degree of endothermicity, an endothermic substance is
more or less unstable, for it is always ready to emit heat, or to do
work, as soon as an opportunity is given to it to decompose. The
theoretical and practical results of this circumstance will be elaborated
in Chapter VI., when the endothermic nature of acetylene is more fully
discussed.

A very simple experiment will show that a notable quantity of heat is set
free when calcium carbide is brought into contact with water, and by
arranging the details of the apparatus in a suitable manner, the quantity
of heat manifested may be measured with considerable accuracy. A lengthy
description of the method of performing this operation, however, scarcely
comes within the province of the present book, and it must be sufficient
to say that the heat is estimated by decomposing a known weight of
carbide by means of water in a small vessel surrounded on all sides by a
carefully jacketed receptacle full of water and provided with a sensitive
thermometer. The quantity of water contained in the outer vessel being
known, and its temperature having been noted before the reaction
commences, an observation of the thermometer after the decomposition is
finished, and when the mercury has reached its highest point, gives data
which show that the reaction between water and a known weight of calcium
carbide produces heat sufficient in amount to raise a known weight of
water through a known thermometric distance; and from these figures the
corresponding number of large calories may easily be calculated. A
determination of this quantity of heat has been made experimentally by
several investigators, including Lewes, who has found that the heat
evolved on decomposing 1 gramme of ordinary commercial carbide with water
is 0.406 large calorie. [Footnote: Lewes returns his result as 406
calories, because he employs the "small calorie." The small calorie is
the quantity of heat needed to raise 1 gramme of water 1° C.; but as
there are 1000 grammes in 1 kilogramme, the large calorie is equal to
1000 small calories. In many respects the former unit is to be
preferred.] As the material operated upon contained only 91.3 per cent.
of true calcium carbide, he estimates the heat corresponding with the
decomposition of 1 gramme of pure carbide to be 0.4446 large calorie. As,
however, it is better, and more in accordance with modern practice, to
quote such data in terms of the atomic or molecular weight of the
substance concerned, and as the molecular weight of calcium carbide is
64, it is preferable to multiply these figures by 64, stating that,
according to Lewes' researches, the heat of decomposition of "1 gramme-
molecule" (_i.e._, 64 grammes) of a calcium carbide having a purity
of 91.3 per cent. is just under 26 calories, or that of 1 gramme-molecule
of pure carbide 28.454 calories. It is customary now to omit the phrase
"one gramme-molecule" in giving similar figures, physicists saying simply
that the heat of decomposition of calcium carbide by water when calcium
hydroxide is the by-product, is 28.454 large calories.

Assuming all the necessary data known, as happens to be the case in the
present instance, it is also possible to calculate theoretically the heat
which should be evolved on decomposing calcium carbide by means of water.
Equation (2), given on page 24, shows that of the substances taking part
in the reaction 1 molecular weight of calcium carbide is decomposed, and
1 molecular weight of acetylene is formed. Of the two molecules of water,
only one is decomposed, the other passing to the calcium hydroxide
unchanged; and the 1 molecule of calcium hydroxide is formed by the
combination of 1 atom of free calcium, 1 atom of free oxygen, and 1
molecule of water already existing as such. Calcium hydroxide and water
are both exothermic substances, absorbing heat when they are decomposed,
liberating it when they are formed. Acetylene is endothermic, liberating
heat when it is decomposed, absorbing it when it is produced.
Unfortunately there is still some doubt about the heat of formation of
calcium carbide, De Forcrand returning it as -0.65 calorie, and Gin as
+3.9 calories. De Forcrand's figure means, as before explained, that 64
grammes of carbide should absorb 0.65 large calorie when they are
produced by the combination of 40 grammes of calcium with 24 grammes of
carbon; the minus sign calling attention to the belief that calcium
carbide is endothermic, heat being liberated when it suffers
decomposition. On the contrary, Gin's figure expresses the idea that
calcium carbide is exothermic, liberating 3.9 calories when it is
produced, and absorbing them when it is decomposed. In the absence of
corroborative evidence one way or the other, Gin's determination will be
accepted for the ensuing calculation. In equation (2), therefore, calcium
carbide is decomposed and absorbs heat; water is decomposed and absorbs
heat; acetylene is produced and absorbs heat; and calcium hydroxide is
produced liberating heat. On consulting the tables of thermo-chemical
data given in the various text-books on physical chemistry, all the other
constants needed for the present purpose will be found; and it will
appear that the heat of formation of water is +69 calories, that of
acetylene -58.1 calories, and that of calcium hydroxide, when 1 atom of
calcium, 1 atom of oxygen, and 1 molecule of water unite together, is
+160.1 calories. [Footnote: When 1 atom of calcium, 2 atoms of oxygen,
and 2 atoms of hydrogen unite to form solid calcium hydroxide, the heat
of formation of the latter is 229.1 (cf. _infra_). This value is
simply 160.1 + 69.0 = 229.1; 69.0 being the heat of formation of water.]
Collecting the results into the form of a balance-sheet, the effect of
decomposing calcium carbide with water is this:

_Heat liberated._              | _Heat absorbed._
                               |
Formation of Ca(OH)_2   16O.1  | Formation of acetylene    58.1
| Decomposition of water    69.0
                               | Decomposition of carbide   3.9
                               |         Balance           29.1
                        _____  |                           _____
                               |
         Total          160.1  |       Total              160.1

Therefore when 64 grammes of calcium carbide are decomposed by water, or
when 18 grammes of water are decomposed by calcium carbide (the by-
product in each case being calcium hydroxide or slaked lime, for the
formation of which a further 18 grammes of water must be present in the
second instance), 29.1 large calories are set free. It is not possible
yet to determine thermo-chemical data with extreme accuracy, especially
on such a material as calcium carbide, which is hardly to be procured in
a state of chemical purity; and so the value 28.454 calories
experimentally found by Lewes agrees very satisfactorily, considering all
things, with the calculated value 29.1 calories. It is to be noticed,
however, that the above calculated value has been deduced on the
assumption that the calcium hydroxide is obtained as a dry powder; but as
slaked lime is somewhat soluble in water, and as it evolves 3 calories in
so dissolving, if sufficient water is present to take up the calcium
hydroxide entirely into the liquid form (_i.e._, that of a
solution), the amount of heat set free will be greater by those 3
calories, _i.e._, 32.1 large calories altogether.

THE PROCESS OF GENERATION.--Taking 28 as the number of large calories
developed when 64 grammes of ordinary commercial calcium carbide are
decomposed with sufficient water to leave dry solid calcium hydroxide as
the by-product in acetylene generation, this quantity of heat is capable
of exerting any of the following effects. It is sufficient (1) to raise
1000 grammes of water through 28° C., say from 10° C. (50° F., which is
roughly the temperature of ordinary cold water) to 38° C. It is
sufficient (2) to raise 64 grammes of water (a weight equal to that of
the carbide decomposed) through 438° C., if that were possible. It would
raise (3) 311 grammes of water through 90° C., _i.e._, from 10° C.
to the boiling-point. If, however, instead of remaining in the liquid
state, the water were converted into vapour, the same quantity of heat
would suffice (4) to change 44.7 grammes of water at 10° C. into steam at
100° C.; or (5) to change 46.7 grammes of water at 10° C. into vapour at
the same temperature. It is an action of the last character which takes
place in acetylene generators of the most modern and usual pattern, some
of the surplus water being evaporated and carried away as vapour at a
comparatively low temperature with the escaping gas; for it must be
remembered that although steam, as such, condenses into liquid water
immediately the surrounding temperature falls below 100° C., the vapour
of water remains uncondensed, even at temperatures below the freezing-
point, when that vapour is distributed among some permanent gas--the
precise quantity of vapour so remaining being a function of the
temperature and barometric height. Thus it appears that if the heat
evolved during the decomposition of calcium carbide is not otherwise
consumed, it is sufficient in amount to vaporise almost exactly 3 parts
by weight of water for every 4 parts of carbide attacked; but if it were
expended upon some substance such as acetylene, calcium carbide, or
steel, which, unlike water, could not absorb an extra amount by changing
its physical state (from solid to liquid, or from liquid to gas), the
heat generated during the decomposition of a given weight of carbide
would suffice to raise an equal weight of the particular substance under
consideration to a temperature vastly exceeding 438° C. The temperature
attained, indeed, measured in Centigrade degrees, would be 438 multiplied
by the quotient obtained on dividing the specific heat of water by the
specific heat of the substance considered: which quotient, obviously, is
the "reciprocal" of the specific heat of the said substance.

The analogy to the combustion of coal mentioned on a previous page shows
that although the quantity of heat evolved during a certain chemical
reaction is strictly fixed, the temperature attained is dependent on the
time over which the reaction is spread, being higher as the process is
more rapid. This is due to the fact that throughout the whole period of
reaction heat is escaping from the mass, and passing into the atmosphere
at a fairly constant speed; so that, clearly, the more slowly heat is
produced, the better opportunity has it to pass away, and the less of it
is left to collect in the material under consideration. During the action
of an acetylene generator, there is a current of gas constantly
travelling away from the carbide, there is vapour of water constantly
escaping with the gas, there are the walls of the generator itself
constantly exposed to the cooling action of the atmosphere, and there is
either a mass of calcium carbide or of water within the generator. It is
essential for good working that the temperature of both the acetylene and
the carbide shall be prevented from rising to any noteworthy extent;
while the amount of heat capable of being dissipated into the air through
the walls of the apparatus in a given time is narrowly limited, depending
upon the size and shape of the generator, and the temperature of the
surrounding air. If, then, a small, suitably designed generator is
working quite slowly, the loss of heat through the external walls of the
apparatus may easily be rapid enough to prevent the internal temperature
from rising objectionably high; but the larger the generator, and the
more rapidly it is evolving gas, the less does this become possible.
Since of the substances in or about a generator water is the one which
has by far the largest capacity for absorbing heat, and since it is the
only substance to which any necessary quantity of heat can be safely or
conveniently transmitted, it follows that the larger in size an acetylene
generator is, or the more rapidly that generator is made to deliver gas,
the more desirable is it to use water as the means for dissipating the
surplus heat, and the more necessary is it to employ an apparatus in
which water is in large chemical excess at the actual place of
decomposition.

The argument is sometimes advanced that an acetylene generator containing
carbide in excess will work satisfactorily without exhibiting an
undesirable rise in internal temperature, if the vessel holding the
carbide is merely surrounded by a large quantity of cold water. The idea
is that the heat evolved in that particular portion of the charge which
is suffering decomposition will be communicated with sufficient speed
throughout the whole mass of calcium carbide present, whence it will pass
through the walls of the containing vessel into the water all round.
Provided the generator is quite small, provided the carbide container is
so constructed as to possess the maximum of superficial area with the
minimum of cubical capacity (a geometrical form to which the sphere, and
in one direction the cylinder, are diametrically opposed), and provided
the walls of the container do not become coated internally or externally
with a coating of lime or water scale so as to diminish in heat-
transmitting power, an apparatus designed in the manner indicated is
undoubtedly free from grave objection; but immediately any of those
provisions is neglected, trouble is likely to ensue, for the heat will
not disappear from the place of actual reaction at the necessary speed.
Apparent proof that heat is not accumulating unduly in a water-jacketed
carbide container even when the generator is evolving gas at a fair speed
is easy to obtain; for if, as usually happens, the end of the container
through which the carbide is inserted is exposed to the air, the hand may
be placed upon it, and it will be found to be only slightly warm to the
touch. Such a test, however, is inconclusive, and frequently misleading,
because if more than a pound or two of carbide is present as an undivided
mass, and if water is allowed to attack one portion of it, that
particular portion may attain a high temperature while the rest is
comparatively cool: and if the bulk of the carbide is comparatively cool,
naturally the walls of the containing vessel themselves remain
practically unheated. Three causes work together to prevent this heat
being dissipated through the walls of the carbide vessel with sufficient
rapidity. In the first place, calcium carbide itself is a very bad
conductor of heat. So deficient in heat-conducting power is it that a
lump a few inches in diameter may be raised to redness in a gas flame at
one spot, and kept hot for some minutes, while the rest of the mass
remains sufficiently cool to be held comfortably in the fingers. In the
second place, commercial carbide exists in masses of highly irregular
shape, so that when they are packed into any vessel they only touch at
their angles and edges; and accordingly, even if the material were a
fairly good heat conductor of itself, the air or gas present between each
lump would act as an insulator, protecting the second piece from the heat
generated in the first. In the third place, the calcium hydroxide
produced as the by-product when calcium carbide is decomposed by water
occupies considerably more space than the original carbide--usually two
or three times as much space, the exact figures depending upon the
conditions in which it is formed--and therefore a carbide container
cannot advisedly be charged with more than one-third the quantity of
solid which it is apparently capable of holding. The remaining two-thirds
of the space is naturally full of air when the container is first put
into the generator, but the air is displaced by acetylene as soon as gas
production begins. Whether that space, however, is occupied by air, by
acetylene, or by a gradually growing loose mass of slaked lime, each
separate lump of hot carbide is isolated from its neighbours by a
material which is also a very bad heat conductor; and the heat has but
little opportunity of distributing itself evenly. Moreover, although iron
or steel is a notably better conductor of heat than any of the other
substances present in the carbide vessel, it is, as a metal, only a poor
conductor, being considerably inferior in this respect to copper. If heat
dissipation were the only point to be studied in the construction of an
acetylene apparatus, far better results might be obtained by the
employment of copper for the walls of the carbide container; and possibly
in that case a generator of considerable size, fitted with a water-
jacketed decomposing vessel, might be free from the trouble of
overheating. Nevertheless it will be seen in Chapter VI. that the use of
copper is not permissible for such purposes, its advantages as a good
conductor of heat being neutralised by its more important defects.

When suitable precautions are not taken to remove the heat liberated in
an acetylene apparatus, the temperature of the calcium carbide
occasionally rises to a remarkable degree. Investigating this point, Caro
has studied the phenomena of heat production in a "dipping" generator--
_i.e._, an apparatus in which a cage of carbide is alternately
immersed in and lifted out of a vessel containing water. Using a
generator designed to supply five burners, he has found a maximum
recording thermometer placed in the gas space of the apparatus to give
readings generally between 60° and 100° C.; but in two tests out of ten
he obtained temperatures of about 160° C. To determine the actual
temperature of the calcium carbide itself, he scattered amongst the
carbide charge fragments of different fusible metallic alloys which were
known to melt or soften at certain different temperatures. In all his ten
tests the alloys melting at 120° C. were fused completely; in two tests
other alloys melting at 216° and 240° C. showed signs of fusion; and in
one test an alloy melting at 280° C. began to soften. Working with an
experimental apparatus constructed on the "dripping" principle--
_i.e._, a generator in which water is allowed to fall in single
drops or as a fine stream upon a mass of carbide--with the deliberate
object of ascertaining the highest temperatures capable of production
when calcium carbide is decomposed in this particular fashion, and
employing for the measurement of the heat a Le Chatelier thermo-couple,
with its sensitive wires lying among the carbide lumps, Lewes has
observed a maximum temperature of 674° C. to be reached in 19 minutes
when water was dripped upon 227 grammes of carbide at a speed of about 8
grammes per minute. In other experiments he used a laboratory apparatus
designed upon the "dipping" principle, and found maximum temperatures, in
four different trials, of 703°, 734°, 754°, and 807° C., which were
reached in periods of time ranging from 12 to 17 minutes. Even allowing
for the greater delicacy of the instrument adopted by Lewes for measuring
the temperature in comparison with the device employed by Caro, there
still remains an astonishing difference between Caro's maximum of 280°
and Lewes' maximum of 807° C. The explanation of this discrepancy is to
be inferred from what has just been said. The generator used by Caro was
properly made of metal, was quite small in size, was properly designed
with some skill to prevent overheating as much as possible, and was
worked at the speed for which it was intended--in a word, it was as good
an apparatus as could be made of this particular type. Lewes' generator
was simply a piece of glass and metal, in which provisions to avoid
overheating were absent; and therefore the wide difference between the
temperatures noted does not suggest any inaccuracy of observation or
experiment, but shows what can be done to assist in the dissipation of
heat by careful arrangement of parts. The difference in temperature
between the acetylene and the carbide in Caro's test accentuates the
difficulty of gauging the heat in a carbide vessel by mere external
touch, and supplies experimental proof of the previous assertions as to
the low heat-conducting power of calcium carbide and of the gases of the
decomposing vessel. It must not be supposed that temperatures such as
Lewes has found ever occur in any commercial generator of reasonably good
design and careful construction; they must be regarded rather as
indications of what may happen in an acetylene apparatus when the
phenomena accompanying the evolution of gas are not understood by the
maker, and when all the precautions which can easily be taken to avoid
excessive heating have been omitted, either by building a generator with
carbide in excess too large in size, or by working it too rapidly, or
more generally by adopting a system of construction unsuited to the ends
in view. The fact, however, that Lewes has noted the production of a
temperature of 807° C. is important; because this figure is appreciably
above the point 780° C., at which acetylene decomposes into its elements
in the absence of air.

Nevertheless the production of a temperature somewhat exceeding 100° C.
among the lumps of carbide actually undergoing decomposition can hardly
be avoided in any practical generator. Based on a suggestion in the
"Report of the Committee on Acetylene Generators" which was issued by the
British Home Office in 1902, Fouché has proposed that 130° C., as
measured with the aid of fusible metallic rods, [Footnote: An alloy made
by melting together 55 parts by weight of commercial bismuth and 45 parts
of lead fuses at 127° C., and should be useful in performing the tests.]
should be considered the maximum permissible temperature in any part of a
generator working at full speed for a prolonged period of time. Fouché
adopts this figure on the ground that 130° C. sensibly corresponds with
the temperature at which a yellow substance is formed in a generator by a
process of polymerisation; and, referring to French conditions, states
that few actual apparatus permit the development of so high a
temperature. As a matter of fact, however, a fairly high temperature
among the carbide is less important than in the gas, and perhaps it would
be better to say that the temperature in any part of a generator occupied
by acetylene should not exceed 100° C. Fraenkel has carried out some
experiments upon the temperature of the acetylene immediately after
evolution in a water-to-carbide apparatus containing the carbide in a
subdivided receptacle, using an apparatus now frequently described as
belonging to the "drawer" system of construction. When a quantity of
about 7 lb. of carbide was distributed between 7 different cells of the
receptacle, each cell of which had a capacity of 25 fluid oz., and the
apparatus was caused to develop acetylene at the rate of 7 cubic feet per
hour, maximum thermometers placed immediately over the carbide in the
different cells gave readings of from 70° to 90° C., the average maximum
temperature being about 80° C. Hence the Austrian code of rules issued in
1905 governing the construction of acetylene apparatus contains a clause
to the effect that the temperature in the gas space of a generator must
never exceed 80° C.; whereas the corresponding Italian code contains a
similar stipulation, but quotes the maximum temperature as 100° C.
(_vide_ Chapter IV.).

It is now necessary to see why the production of an excessively high
temperature in an acetylene generator has to be avoided. It must be
avoided, because whenever the temperature in the immediate neighbourhood
of a mass of calcium carbide which is evolving acetylene under the attack
of water rises materially above the boiling-point of water, one or more
of three several objectionable effects is produced--(_a_) upon the
gas generated, (_b_) upon the carbide decomposed, and (_c_)
upon the general chemical reaction taking place.

It has been stated above that in moat generators when the action between
the carbide and the water is proceeding smoothly, it occurs according to
equation (2)--

(2) CaC_2 + 2H_2O = C_2H_2 + Ca(OH)_2

rather than in accordance with equation (1)--

(1) CaC_2 + H_2O = C_2H_2 + CaO.

This is because calcium oxide, or quicklime, the by-product in (1), has
considerable affinity for water, evolving a noteworthy quantity of heat
when it combines with one molecule of water to form one molecule of
calcium hydroxide, or slaked lime, the by-product in (2). If, then, a
small amount of water is added to a large amount of calcium carbide, the
corresponding quantity of acetylene may be liberated on the lines of
equation (1), and there will remain behind a mixture of unaltered calcium
carbide, together with a certain amount of calcium oxide. Inasmuch as
both these substances possess an affinity for water (setting heat free
when they combine with it), when a further limited amount of water is
introduced into the mixture some of it will probably be attracted to the
oxide instead of to the carbide present. It is well known that at
ordinary temperatures quicklime absorbs moisture, or combines with water,
to produce slaked lime; but it is equally well known that in a furnace,
at about a red heat, slaked lime gives up water and changes into
quicklime. The reaction, in fact, between calcium oxide and water is
reversible, and whether those substances combine or dissociate is simply
a question of temperature. In other words, as the temperature rises, the
heat of hydration of calcium oxide diminishes, and calcium hydroxide
becomes constantly a less stable material. If now it should happen that
the affinity between calcium carbide and water should not diminish, or
should diminish in a lower ratio than the affinity between calcium oxide
and water as the temperature of the mass rises from one cause or other,
it is conceivable that at a certain temperature calcium carbide might be
capable of withdrawing the water of hydration from the molecule of slaked
lime, converting the latter into quicklime, and liberating one molecule
of acetylene, thus--

(3) CaC_2 + Ca_2(OH) = C_2H_2 + 2CaO.

It has been proved that a reaction of this character does occur, the
temperature necessary to determine it being given by Lewes as from 420°
to 430° C., which is not much more than half that which he found in a
generator having carbide in excess, albeit one of extremely bad design.
Treating this reaction in the manner previously adopted, the thermo-
chemical phenomena of equation (3) are:

_Heat liberated._              | _Heat liberated._
                               |
Formation of 2CaO       290.0  | Formation of acetylene         58.1
                               | Decomposition of Ca(OH)_2 [1] 229.1
                               | Decomposition of carbide        3.9
        Balance           1.1  |
                       ______  |                               _____
                               |
                        291.1  |                               291.1

[1 Footnote: Into its elements, Ca, O_2, and H_2; _cf._ footnote,
p: 31.]

Or, since the calcium hydroxide is only dehydrated without being
entirely decomposed, and only one molecule of water is broken up, it may
be written:


Formation of CaO         145.0 | Formation of acetylene         58.1
                               | Decomposition of Ca(OH)_2      15.1
                               | Decomposition of water         69.0
        Balance            1.1 | Decomposition of carbide        3.9
                         _____ |                               _____
                               |
                         146.1 |                               146.1

which comes to the same thing. Putting the matter in another shape, it
may be said that the reaction between calcium carbide and water is
exothermic, evolving either 14.0 or 29.1 calories according as the
byproduct is calcium oxide or solid calcium hydroxide; and therefore
either reaction proceeds without external assistance in the cold. The
reaction between carbide and slaked lime, however, is endothermic,
absorbing 1.1 calories; and therefore it requires external assistance
(presence of an elevated temperature) to start it, or continuous
introduction of heat (as from the reaction between the rest of the
carbide present and the water) to cause it to proceed. Of itself, and
were it not for the disadvantages attending the production of a
temperature remotely approaching 400° C. in an acetylene generator, which
disadvantages will be explained in the following paragraphs, there is no
particular reason why reaction (3) should not be permitted to occur, for
it involves (theoretically) no loss of acetylene, and no waste of calcium
carbide. Only one specific feature of the reaction has to be remembered,
and due practical allowance made for it. The reaction represented by
equation (2) proceeds almost instantaneously when the calcium carbide is
of ordinarily good quality, and the acetylene resulting therefrom is
wholly generated within a very few minutes. Equation (3), on the
contrary, consumes much time for its completion, and the gas
corresponding with it is evolved at a gradually diminishing speed which
may cause the reaction to continue for hours--a circumstance that may be
highly inconvenient or quite immaterial according to the design of the
apparatus. When, however, it is desired to construct an automatic
acetylene generator, _i.e._, an apparatus in which the quantity of
gas liberated has to be controlled to suit the requirements of any
indefinite number of burners in use on different occasions, equation (3)
becomes a very important factor in the case. To determine the normal
reaction (No. 2) of an acetylene generator, 64 parts by weight of calcium
carbide must react with 36 parts of water to yield 26 parts by weight of
acetylene, and apparently both carbide and water are entirely consumed;
but if opportunity is given for the occurrence of reaction (3), another
64 parts by weight of carbide may be attacked, without the addition of
any more water, producing, inevitably, another 26 parts of acetylene. If,
then, water is in chemical excess in the generator, all the calcium
carbide present will be decomposed according to equation (2), and the
action will take place without delay; after a few minutes' interval the
whole of the acetylene capable of liberation will have been evolved, and
nothing further can possibly happen until another charge of carbide is
inserted in the apparatus. If, on the other hand, calcium carbide is in
chemical excess in the generator, all the water run in will be consumed
according to equation (2), and this action will again take place without
delay; but unless the temperature of the residual carbide has been kept
well below 400° C., a further evolution of gas will occur which will not
cease for an indeterminate period of time, and which, by strict theory,
given the necessary conditions, might continue until a second volume of
acetylene equal to that liberated at first had been set free. In practice
this phenomenon of a secondary production of gas, which is known as
"after-generation," is regularly met with in all generators where the
carbide is in excess of the water added; but the amount of acetylene so
evolved rarely exceeds one-quarter or one-third of the main make. The
actual amount evolved and the rate of evolution depend, not merely upon
the quantity of undecomposed carbide still remaining in contact with the
damp lime, but also upon the rapidity with which carbide naturally
decomposes in presence of liquid water, and the size of the lumps. Where
"after-generation" is caused by the ascent of water vapour round lumps of
carbide, the volume of gas produced in a given interval of time is
largely governed by the temperature prevailing and the shape of the
apparatus. It is evident that even copious "after-generation" is a matter
of no consequence in any generator provided with a holder to store the
gas, assuming that by some trustworthy device the addition of water is
stopped by the time that the holder is two-thirds or three-quarters full.
In the absence of a holder, or if the holder fitted is too small to serve
its proper purpose, "aftergeneration" is extremely troublesome and
sometimes dangerous, but a full discussion of this subject must be
postponed to the next chapter.

EFFECT OF HEAT ON ACETYLENE.--The effect of excessive retention of heat
in an acetylene generator upon the gas itself is very marked, as
acetylene begins spontaneously to suffer change, and to be converted into
other compounds at elevated temperatures. Being a purely chemical
phenomenon, the behaviour of acetylene when exposed to heat will be fully
discussed in Chapter VI. when the properties of the gas are being
systematically dealt with. Here it will be sufficient to assume that the
character of the changes taking place is understood, and only the
practical results of those changes as affecting the various components of
an acetylene installation have to be studied. According to Lewes,
acetylene commences to "polymerise" at a temperature of about 600° C.,
when it is converted into other hydrocarbons having the same percentage
composition, but containing more atoms of carbon and hydrogen in their
molecules. The formula of acetylene is C_2H_2 which means that 2 atoms of
carbon and 2 atoms of hydrogen unite to form 1 molecule of acetylene, a
body evidently containing roughly 92.3 per cent. by weight of carbon and
7.7 per cent. by weight of hydrogen. One of the most noteworthy
substances produced by the polymerisation of acetylene is benzene, the
formula of which is C_6H_6, and this is formed in the manner indicated by
the equation--

(4) 3C_2H_2 = C_6H_6.

Now benzene also contains 92.3 per cent. of carbon and 7.7 per cent. by
weight of hydrogen in its composition, but its molecule contains 6 atoms
of each element. When the chemical formula representing a compound body
indicates a substance which is, or can be obtained as, a gas or vapour,
it convoys another idea over and above those mentioned on a previous
page. The formula "C_2H_2," for example, means 1 molecule, or 26 parts by
weight of acetylene, just as "H_2" means 1 molecule, or 2 parts by weight
of hydrogen; but both formulæ also mean equal parts by volume of the
respective substances, and since H_2 must mean 2 volumes, being twice H,
which is manifestly 1, C_2H_2 must mean 2 volumes of acetylene as well.
Thus equation (4) states that 6 volumes of acetylene, or 3 x 26 parts by
weight, unite to form 2 volumes of benzene, or 78 parts by weight. If
these hydrocarbons are burnt in air, both are indifferently converted
into carbon dioxide (carbonic acid gas) and water vapour; and, neglecting
for the sake of simplicity the nitrogen of the atmosphere, the processes
may be shown thus:

(5) 2C_2H_2 + 5O_2 = 4CO_2 + 2H_2O.

(6) 2C_6H_6 + 15O_2 = 12CO_2 + 6H_2O.

Equation (5) shows that 4 volumes of acetylene combine with 10 volumes of
oxygen to produce 8 volumes of carbon dioxide and 4 of water vapour;
while equation (6) indicates that 4 volumes of benzene combine with 30
volumes of oxygen to yield 24 volumes of carbon dioxide and 12 of water
vapour. Two parts by volume of acetylene therefore require 5 parts by
volume of oxygen for perfect combustion, whereas two parts by volume of
benzene need 15--_i.e._, exactly three times as much. In order to
work satisfactorily, and to develop the maximum of illuminating power
from any kind of gas consumed, a gas-burner has to be designed with
considerable skill so as to attract to the base of the flame precisely
that volume of air which contains the quantity of oxygen necessary to
insure complete combustion, for an excess of air in a flame is only less
objectionable than a deficiency thereof. If, then, an acetylene burner is
properly constructed, as most modern ones are, it draws into the flame
air corresponding with two and a half volumes of oxygen for every one
volume of acetylene passing from the jets; whereas if it were intended
for the combustion of benzene vapour it would have to attract three times
that quantity. Since any flame supplied with too little air tends to emit
free carbon or soot, it follows that any well-made acetylene burner
delivering a gas containing benzene vapour will yield a more or lens
smoky flame according to the proportion of benzene in the acetylene.
Moreover, at ordinary temperatures benzene is a liquid, for it boils at
81° C., and although, as was explained above in the case of water, it is
capable of remaining in the state of vapour far below its boiling-point
so long as it is suspended in a sufficiency of some permanent gas like
acetylene, if the proportion of vapour in the gas at any given
temperature exceeds a certain amount the excess will be precipitated in
the liquid form; while as the temperature falls the proportion of vapour
which can be retained in a given volume of gas also diminishes to a
noteworthy extent. Should any liquid, be it water or benzene, or any
other substance, separate from the acetylene under the influence of cold
while the gas is passing through pipes, the liquid will run downwards to
the lowest points in those pipes; and unless due precautions are taken,
by the insertion of draw-off cocks, collecting wells, or the like, to
withdraw the deposited water or other liquid, it will accumulate in all
bends, angles, and dips till the pipes are partly or completely sealed
against the passage of gas, and the lights will either "jump" or be
extinguished altogether. In the specific case of an acetylene generator
this trouble is very likely to arise, even when the gas is not heated
sufficiently during evolution for polymerisation to occur and benzene or
other liquid hydrocarbons to be formed, because any excess of water
present in the decomposing vessel is liable to be vaporised by the heat
of the reaction--as already stated it is desirable that water shall be so
vaporised--and will remain safely vaporised as long as the pipes are kept
warm inside or near the generator; but directly the pipes pass away from
the hot generator the cooling action of the air begins, and some liquid
water will be immediately produced. Like the phenomenon of after-
generation, this equally inevitable phenomenon of water condensation will
be either an inconvenience or source of positive danger, or will be a
matter of no consequence whatever, simply as the whole acetylene
installation, including the service-pipes, is ignorantly or intelligently
built.

As long as nothing but pure polymerisation happens to the acetylene, as
long, that is to say, as it is merely converted into other hydrocarbons
also having the general formula C_(2n)H_(2n), no harm will be done to the
gas as regards illuminating power, for benzene burns with a still more
luminous flame than acetylene itself; nor will any injury result to the
gas if it is required for combustion in heating or cooking stoves beyond
the fact that the burners, luminous or atmospheric, will be delivering a
material for the consumption of which they are not properly designed. But
if the temperature should rise much above the point at which benzene is
the most conspicuous product of polymerisation, other far more
complicated changes occur, and harmful effects may be produced in two
separate ways. Some of the new hydrocarbons formed may interact to yield
a mixture of one or more other hydrocarbons containing a higher
proportion of carbon than that which is present in acetylene and benzene,
together with a corresponding proportion of free hydrogen; the former
will probably be either liquids or solids, while the latter burns with a
perfectly non-luminous flame. Thus the quantity of gas evolved from the
carbide and passed into the holder is less than it should be, owing to
the condensation of its non-gaseous constituents. To quote an instance of
this, Haber has found 15 litres of acetylene to be reduced in volume to
10 litres when the gas was heated to 638° C. By other changes, some
"saturated hydrocarbons," _i.e._, bodies having the general formula
C_nH_(2n+2), of which methane or marsh-gas, CH_4 is the best known, may
be produced; and those all possess lower illuminating powers than
acetylene. In two of those experiments already described, where Lewes
observed maximum temperatures ranging from 703° to 807° C., samples of
the gas which issued when the heat was greatest were submitted to
chemical analysis, and their illuminating powers were determined. The
figures he gives are as follows:

                                     I.         II.
                                  Per Cent.   Per Cent.
       Acetylene                    70.0        69.7
       Saturated hydrocarbons       11.3        11.4
       Hydrogen                     18.7        18.9
                                   _____       _____

                                   100.0       100.0

The average illuminating power of these mixed gases is about 126 candles
per 5 cubic feet, whereas that of pure acetylene burnt under good
laboratory conditions is 240 candles per 5 cubic feet. The product, it
will be seen, had lost almost exactly 50 per cent. of its value as an
illuminant, owing to the excessive heating to which it had been, exposed.
Some of the liquid hydrocarbons formed at the same time are not limpid
fluids like benzene, which is less viscous than water, but are thick oily
substances, or even tars. They therefore tend to block the tubes of the
apparatus with great persistence, while the tar adheres to the calcium
carbide and causes its further attack by water to be very irregular, or
even altogether impossible. In some of the very badly designed generators
of a few years back this tarry matter was distinctly visible when the
apparatus was disconnected for recharging, for the spent carbide was
exceptionally yellow, brown, or blackish in colour, [Footnote: As will be
pointed out later, the colour of the spent lime cannot always be employed
as a means for judging whether overheating has occurred in a generator.]
and the odour of tar was as noticeable as that of crude acetylene.

There is another effect of heat upon acetylene, more calculated to be
dangerous than any of those just mentioned, which must not be lost sight
of. Being an endothermic substance, acetylene is prone to decompose into
its elements--

(7) C_2H_2 -> C_2 + H_2

whenever it has the opportunity; and the opportunity arrives if the
temperature of the gas risen to 780° C., or if the pressure under which
the gas is stored exceeds two atmospheres absolute (roughly 30 lb. per
square inch). It decomposes, be it carefully understood, in the complete
absence of air, directly the smallest spark of red-hot material or of
electricity, or directly a gentle shock, such as that of a fall or blow
on the vessel holding it, is applied to any volume of acetylene existing
at a temperature exceeding 780° or at a gross pressure of 30 lb. per
square inch; and however large that volume may be, unless it is contained
in tubes of very small diameter, as will appear hereafter, the
decomposition or dissociation into its elements will extend throughout
the whole of the gas. Equation (7) states that 2 volumes of acetylene
yield 2 volumes of hydrogen and a quantity of carbon which would measure
2 volumes were it obtained in the state of gas, but which, being a solid,
occupies a space that may be neglected. Apparently, therefore, the
dissociation of acetylene involves no alteration in volume, and should
not exhibit explosive effects. This is erroneous, because 2 volumes of
acetylene only yield exactly 2 volumes of hydrogen when both gases are
measured at the same temperature, and all gases increase in volume as
their temperature rises. As acetylene is endothermic and evolves much
heat on decomposition, and as that heat must primarily be communicated to
the hydrogen, it follows that the latter must be much hotter than the
original acetylene; the hydrogen accordingly strives to fill a much
larger space than that occupied by the undecomposed gas, and if that gas
is contained in a closed vessel, considerable internal pressure will be
set up, which may or may not cause the vessel to burst.

What has been said in the preceding paragraph about the temperature at
which acetylene decomposes is only true when the gas is free from any
notable quantity of air. In presence of air, acetylene inflames at a much
lower temperature, viz., 480° C. In a manner precisely similar to that of
all other combustible gases, if a stream of acetylene issues into the
atmosphere, as from the orifices of a burner, the gas catches fire and
burns quietly directly any substance having a temperature of 480° C. or
upwards is brought near it; but if acetylene in bulk is mixed with the
necessary quantity of air to support combustion, and any object exceeding
480° C. in temperature comes in contact with it, the oxidation of the
hydrocarbon proceeds at such a high rate of speed as to be termed an
explosion. The proportion of air needed to support combustion varies with
every combustible material within known limits (_cf._ Chapter VI.),
and according to Eitner the smallest quantity of air required to make
acetylene burn or explode, as the case may be, is 25 per cent. If, by
ignorant design or by careless manipulation, the first batches of
acetylene evolved from a freshly charged generator should contain more
than 25 per cent. of air; or if in the inauguration of a new installation
the air should not be swept out of the pipes, and the first makes of gas
should become diluted with 25 to 50 per cent. of air, any glowing body
whose temperature exceeds 480° C. will fire the gas; and, as in the
former instance, the flame will extend all through the mass of acetylene
with disastrous violence and at enormous speed unless the gas is stored
in narrow pipes of extremely small diameter. Three practical lessons are
to be learnt from this circumstance: first, tobacco-smoking must never be
permitted in any building where an escape of raw acetylene is possible,
because the temperature of a lighted cigar, &c., exceeds 480° C.;
secondly, a light must never be applied to a pipe delivering acetylene
until a proper acetylene burner has been screwed into the aperture;
thirdly, if any appreciable amount of acetylene is present in the air, no
operation should be performed upon any portion of an acetylene plant
which involves such processes as scraping or chipping with the aid of a
steel tool or shovel. If, for example, the iron or stoneware sludge-pipe
is choked, or the interior of the dismantled generator is blocked, and
attempts are made to remove the obstruction with a hard steel tool, a
spark is very likely to be formed which, granting the existence of
sufficient acetylene in the air, is perfectly able to fire the gas. For
all such purposes wooden implements only are best employed; but the
remark does not apply to the hand-charging of a carbide-to-water
generator through its proper shoot. Before passing to another subject, it
may be remarked that a quantity of air far less than that which causes
acetylene to become dangerous is objectionable, as its presence is apt to
reduce the illuminating power of the gas unduly.

EFFECT OF HEAT ON CARBIDE.--Chemically speaking, no amount of heat
possible of attainment in the worst acetylene generator can affect
calcium carbide in the slightest degree, because that substance may be
raised to almost any temperature short of those distinguishing the
electric furnace, without suffering any change or deterioration. In the
absence of water, calcium carbide is as inert a substance as can well be
imagined: it cannot be made to catch fire, for it is absolutely
incombustible, and it can be heated in any ordinary flame for reasonable
periods of time, or thrown into any non-electrical furnace without
suffering in the least. But in presence of water, or of any liquid
containing water, matters are different. If the temperature of an
acetylene generator rises to such an extent that part of the gas is
polymerised into tar, that tar naturally tends to coat the residual
carbide lumps, and, being greasy in character, more or less completely
protects the interior from further attack. Action of this nature not only
means that the acetylene is diminished in quantity and quality by partial
decomposition, but it also means that the make is smaller owing to
imperfect decomposition of the carbide: while over and above this is the
liability to nuisance or danger when a mass of solid residue containing
some unaltered calcium carbide is removed from the apparatus and thrown
away. In fact, whenever the residue of a generator is not so saturated
with excess of water as to be of a creamy consistency, it should be put
into an uncovered vessel in the open air, and treated with some ten times
its volume of water before being run into any drain or closed pipe where
an accumulation of acetylene may occur. Even at temperatures far below
those needed to determine a production of tar or an oily coating on the
carbide, if water attacks an excess of calcium carbide somewhat rapidly,
there is a marked tendency for the carbide to be "baked" by the heat
produced; the slaked lime adhering to the lumps as a hard skin which
greatly retards the penetration of more water to the interior.

COLOUR OF SPENT CARBIDE.--In the early days of the industry, it was
frequently taken for granted that any degradation in the colour of the
spent lime left in an acetylene generator was proof that overheating had
taken place during the decomposition of the carbide. Since both calcium
oxide and hydroxide are white substances, it was thought that a brownish,
greyish, or blackish residue must necessarily point to incipient
polymerisation of the gas. This view would be correct if calcium carbide
were prepared in a state of chemical purity, for it also is a white body.
Commercial carbide, however, is not pure; it usually contains some
foreign matter which tints the residue remaining after gasification. When
a manufacturer strives to give his carbide the highest gas-making power
possible he frequently increases the proportion of carbon in the charge
submitted to electric smelting, until a small excess is reached, which
remains in the free state amongst the finished carbide. After
decomposition the fine particles of carbon stain the moist lime a bluish
grey tint, the depth of shade manifestly depending upon the amount
present. If such a sludge is copiously diluted with water, particles of
carbon having the appearance and gritty or flaky nature of coke often
rise to the surface or fall to the bottom of the liquid; whence they can
easily be picked out and identified as pure or impure carbon by simple
tests. Similarly the lime or carbon put into the electric furnace may
contain small quantities of compounds which are naturally coloured; and
which, reappearing in the sludge either in their original or in a
different state of combination, confer upon the sludge their
characteristic tinge. Spent lime of a yellowish brown colour is
frequently to be met with in circumstances that are clearly no reproach
to the generator. Doubtless the tint is due to the presence of some
coloured metallic oxide or other compound which has escaped reduction in
the electric furnace. The colour which the residual lime afterwards
assumes may not be noticeable in the dry carbide before decomposition,
either because some change in the colour-giving impurity takes place
during the chemical reactions in the generator or because the tint is
simply masked by the greyish white of the carbide and its free carbon.
Hence it follows that a bad colour in the waste lime removed from a
generator only points to overheating and polymerisation of the acetylene
when corroborative evidence is obtained--such as a distinct tarry smell,
the actual discovery of oily or tarry matters elsewhere, or a grave
reduction in the illuminating power of the gas.

MAXIMUM ATTAINABLE TEMPERATURES.--In order to discover the maximum
temperature which can be reached in or about an acetylene generator when
an apparatus belonging to one of the best types is fed at a proper rate
with calcium carbide in lumps of the most suitable size, the following
calculation may be made. In the first place, it will be assumed that no
loss of heat by radiation occurs from the walls of the generator;
secondly, the small quantity of heat taken up by the calcium hydroxide
produced will be ignored; and, thirdly, the specific heat of acetylene
will be assumed to be 0.25, which is about its most probable value. Now,
a hand-fed carbide-to-water generator will work with half a gallon of
water for every 1 lb. of carbide decomposed, quantities which correspond
with 320 grammes of water per 64 grammes (1 molecular weight) of carbide.
Of those 320 grammes of water, 18 are chemically destroyed, leaving 302.
The decomposition of 64 grammes of commercial carbide evolves 28 large
calories of heat. Assuming all the heat to be absorbed by the water, 28
calories would raise 302 grammes through (28 X 1000 / 302) = 93° C.,
_i.e._, from 44.6° F. to the boiling-point. Assuming all the heat to
be communicated to the acetylene, those 28 calories would raise the 26
grammes of gas liberated through (28 X 1000 / 26 / 0.25) = 4308° C., if
that were possible. But if, as would actually be the case, the heat were
distributed uniformly amongst the 302 grammes of water and the 20 grammes
of acetylene, both gas and water would be raised through the same number
of degrees, viz., 90.8° C. [Footnote: Let x = the number of large
calories absorbed by the water; then 28 - x = those taken up by the gas.
Then--

1000x / 302 = 1000 (28 - x) / (26 X 0.25)

whence x = 27.41; and 28 - x = 0.59.

Therefore, for water, the rise in temperature is--

27.41 X 1000 / 302 = 90.8° C.;

and for acetylene the rise is--

0.59 X 1000 / 26 / 0.25 = 90.8° C.]

If the generator were designed on lines to satisfy the United States Fire
Underwriters, it would contain 8.33 lb. of water to every 1 lb. of
carbide attacked; identical calculations then showing that the original
temperature of the water and gas would be raised through 53.7° C.
Provided the carbide is not charged into such an apparatus in lumps of
too large a size, nor at too high a rate, there will be no appreciable
amount of local overheating developed; and nowhere, therefore, will the
rise in temperature exceed 91° in the first instance, or 54° C. in the
second. Indeed it will be considerably smaller than this, because a large
proportion of the heat evolved will be lost by radiation through the
generator walls, while another portion will be converted from sensible
into latent heat by causing part of the water to pass off as vapour with
the acetylene.

EFFECT OF HIGH TEMPERATURES ON GENERATORS.--As the temperature amongst
the carbide in any generator in which water is not present in large
excess may easily reach 200° C. or upwards, no material ought to be
employed in the construction of such generators which is not competent to
withstand a considerable amount of heat in perfect safety. The ordinary
varieties of soft solder applied with the bitt in all kinds of light
metal-work usually melt, according to their composition, at about 180°
C.; and therefore this method of making joints is only suitable for
objects that are never raised appreciably in temperature above the
boiling-point of water. No joint in an acetylene generator, the partial
or complete failure of which would radically affect the behaviour of the
apparatus, by permitting the charges of carbide and of water to come into
contact at an abnormal rate of speed, by allowing the acetylene to escape
directly through the crack into the atmosphere, or by enabling the water
to run out of the seal of any vessel containing gas so as to set up a
free communication between that vessel and the air, ought ever to be made
of soft solder--every joint of this character should be constructed
either by riveting, by bolting, or by doubly folding the metal sheets.
Apparently, a joint constantly immersed in water on one side cannot rise
in temperature above the boiling-point of the liquid, even when its other
side is heated strongly; but since, even if a generator is not charged
with naturally hard water, its fluid contents soon become "hard" by
dissolution of lime, there is always a liability to the deposition of
water scale over the joint. Such water scale is a very bad heat
conductor, as is seen in steam boilers, so that a seam coated with an
exceedingly thin layer of scale, and heated sharply on one side, will
rise above the boiling-point of water even if the liquid on its opposite
side is ice-cold. For a while the film of scale may be quite water-tight,
but after it has been heated by contact with the hot metal several times
it becomes brittle and cracks without warning. But there is a more
important reason for avoiding the use of plumbers' solder. It might seem
that as the natural hard, protective skin of the metal is liable to be
injured or removed by the bending or by the drilling or punching which
precedes the insertion of the rivets or studs, an application of soft
solder to such a joint should be advantageous. This is not true because
of the influence of galvanic action. As all soft solders consist largely
of lead, if a joint is soldered, a "galvanic couple" of lead and iron, or
of lead and zinc (when the apparatus is built of galvanised steel), is
exposed to the liquid bathing it; and since in both cases the lead is
highly electro-negative to the iron or zinc, it is the iron or zinc which
suffers attack, assuming the liquid to possess any corrosive properties
whatever. Galvanised iron which has been injured during the joint-making
presents a zinc-iron couple to the water, but the zinc protects the iron;
if a lead solder is present, the iron will begin to corrode immediately
the zinc has disappeared. In the absence of lead it is the less important
metal, but in the presence of lead it is the more important (the
foundation) metal which is the soluble element of the couple. Where
practicable, joints in an acetylene generator may safely be made by
welding or by autogenous soldering ("burning"), because no other metal is
introduced into the system; any other process, except that of riveting or
folding, only hastens destruction of the plant. The ideal method of
making joints about an acetylene generator is manifestly that of
autogenous soldering, because, as will appear in Chapter IX. of this
book, the most convenient and efficient apparatus for performing the
operation is the oxy-acetylene blow-pipe, which can be employed so as to
convert two separate pieces of similar metal into one homogeneous whole.

In less critical situations in an acetylene plant, such as the partitions
of a carbide container, &c., where the collapse of the seam or joint
would not be followed by any of the effects previously suggested, there
is less cause for prohibiting the use of unfortified solder; but even
here, two or three rivets, just sufficient to hold the metal in position
if the solder should give way, are advisedly put into all apparatus. In
other portions of an acetylene installation where a merely soldered joint
is exposed to warm damp gas which is in process of cooling, instead of
being bathed in hard water, an equal, though totally dissimilar, danger
is courted. The main constituent of such solders that are capable of
being applied with the bitt is lead; lead is distinctly soluble in soft
or pure water; and the water which separates by condensation out of a
warm damp gas is absolutely soft, for it has been distilled. If
condensation takes place at or near a soldered joint in such a way that
water trickles over the solder, by slow degrees the metallic lead will be
dissolved and removed, and eventually a time will come when the joint is
no longer tight to gas. In fact, if an acetylene installation is of more
than very small dimensions, _e.g._, when it is intended to supply
any building as large as, or larger than, the average country residence,
if it is to give satisfaction to both constructor and purchaser by being
quite trustworthy and, possessed of a due lease of life, say ten or
fifteen years, it must be built of stouter materials than the light
sheets which alone are suitable for manipulation with the soldering-iron
or for bending in the ordinary type of metal press. Sound cast-iron,
heavy sheet-metal, or light boiler-plate is the proper substance of which
to construct all the important parts of a generator, and the joints in
wrought metal must be riveted and caulked or soldered autogeneously as
mentioned above. So built, the installation becomes much more costly to
lay down than an apparatus composed of tinplate, zinc, or thin galvanised
iron, but it will prove more economical in the long run. It is not too
much to say that if ignorant and short-sighted makers in the earliest
days of the acetylene industry had not recommended and supplied to their
customers lightly built apparatus which has in many instances already
begun to give trouble, to need repairs, and to fail by thorough
corrosion--apparatus which frequently had nothing but cheapness in its
favour--the use of the gas would have spread more rapidly than it has
done, and the public would not now be hearing of partial or complete
failures of acetylene installations. Each of these failures, whether
accompanied by explosions and injury to persons or not, acts more
powerfully to restrain a possible new customer from adopting the
acetylene light, than several wholly successful plants urge him to take
it up; for the average member of the public is not in a position to
distinguish properly between the collapse of a certain generator owing to
defective design or construction (which reflects no discredit upon the
gas itself), and the failure of acetylene to show in practice those
advantages that have been ascribed to it. One peculiar and noteworthy
feature of acetylene, often overlooked, is that the apparatus is
constructed by men who may have been accustomed to gas-making plant all
their lives, and who may understand by mere habit how to superintend a
chemical operation; but the same apparatus is used by persons who
generally have no special acquaintance with such subjects, and who, very
possibly, have not even burnt coal-gas at any period of their lives.
Hence it happens that when some thoughtless action on the part of the
country attendant of an acetylene apparatus is followed by an escape of
gas from the generator, and by an accumulation of that gas in the house
where the plant is situated, or when, in disregard of rules, he takes a
naked light into the house and an explosion follows, the builder
dismisses the episode as a piece of stupidity or wilful misbehaviour for
which he can in nowise be held morally responsible; whereas the builder
himself is to blame for designing an apparatus from which an escape of
gas can be accompanied by sensible risks to property or life. However
unpalatable this assertion may be, its truth cannot be controverted;
because, short of criminal intention or insanity on the part of the
attendant, it is in the first place a mere matter of knowledge and skill
so to construct an acetylene plant that an escape of gas is extremely
unlikely, even when the apparatus is opened for recharging, or when it is
manipulated wrongly; and in the second place, it is easy so to arrange
the plant that any disturbance of its functions which may occur shall be
followed by an immediate removal of the surplus gas into a place of
complete safety outside and above the generator-house.

GENERATION AT LOW TEMPERATURES.--In all that has been said hitherto about
the reaction between calcium carbide and water being instantaneous, it
has been assumed that the two substances are brought together at or about
the usual temperature of an occupied room, _i.e._, 15 degrees C. If,
however, the temperature is materially lower than this, the speed of the
reaction falls off, until at -5 degrees C., supposing the water still to
remain liquid, evolution of acetylene practically ceases. Even at the
freezing-point of pure water gas is produced but slowly; and if a lump of
carbide is thrown on to a block of ice, decomposition proceeds so gently
that the liberated acetylene may be ignited to form a kind of torch,
while heat is generated with insufficient rapidity to cause the carbide
to sink into the block. This fact has very important bearings upon the
manipulation of an acetylene generator in winter time. It is evident that
unless precautions are taken those portions of an apparatus which contain
water are liable to freeze on a cold night; because, even if the
generator has been at work producing gas (and consequently evolving heat)
till late in the evening, the surplus heat stored in the plant may escape
into the atmosphere long before more acetylene has to be made, and
obviously while frost is still reigning in the neighbourhood. If the
water freezes in the water store, in the pipes leading therefrom, in the
holder seal, or in the actual decomposing chamber, a fresh batch of gas
is either totally incapable of production, because the water cannot be
brought into contact with the calcium carbide in the apparatus, or it can
only be generated with excessive slowness because the carbide introduced
falls on to solid ice. Theoretically, too, there is a possibility that
some portion of the apparatus--a pipe in particular--may be burst by the
freezing, owing to the irresistible force with which water expands when
it changes into the solid condition. Probably this last contingency,
clearly accompanied as it would be by grave risk, is somewhat remote, all
the plant being constructed of elastic material; but in practice even a
simple interference with the functions of a generator by freezing,
ideally of no special moment, is highly dangerous, because of the great
likelihood that hurried and wholly improper attempts to thaw it will be
made by the attendant. As it has been well known for many years that the
solidifying point of water can be lowered to almost any degree below
normal freezing by dissolving in it certain salts in definite
proportions, one of the first methods suggested for preventing the
formation of ice in an acetylene generator was to employ such a salt,
using, in fact, for the decomposition of the carbide some saline solution
which remains liquid below the minimum night temperature of the winter
season. Such a process, however, has proved unsuitable for the purpose in
view; and the explanation of that fact is found in what has just been
stated: the "water" of the generator may admittedly be safely maintained
in the fluid state, but from so cold a liquid acetylene will not be
generated smoothly, if at all. Moreover, were it not so, a process of
this character is unnecessarily expensive, although suitable salts are
very cheap, for the water of the generator is constantly being consumed,
[Footnote: It has already been said that most generators "consume" a much
larger volume of water than the amount corresponding with the chemical
reaction involved: the excess of water passing into the sludge or by-
product. Thus a considerable quantity of any anti-freezing agent must be
thrown aside each time the apparatus is cleaned out or its fluid contents
are run off.] and as constantly needs renewal; which means that a fresh
batch of salt would be required every time the apparatus was recharged,
so long as frost existed or might be expected. A somewhat different
condition obtains in the holder of an acetylene installation. Here,
whenever the holder is a separate item in the plant, not constituting a
portion of the generating apparatus, the water which forms the seal of a
rising holder, or which fills half the space of a displacement holder,
lasts indefinitely; and it behaves equally well, whatever its temperature
may be, so long as it retains a fluid state. This matter will be
discussed with greater detail at the end of Chapter III. At present the
point to be insisted on is that the temperature in any constituent of an
acetylene installation which contains water must not be permitted to fall
to the freezing-point; while the water actually used for decomposition
must be kept well above that temperature.

GENERATION AT HIGH TEMPERATURES.--At temperatures largely exceeding those
of the atmosphere, the reaction between calcium carbide and water tends
to become irregular; while at a red heat steam acts very slowly upon
carbide, evolving a mixture of acetylene and hydrogen in place of pure
acetylene. But since at pressures which do not materially exceed that of
the atmosphere, water changes into vapour at 100° C., above that
temperature there can be no question of a reaction between carbide and
liquid water. Moreover, as has been pointed out, steam or water vapour
will continue to exist as such at temperatures even as low as the
freezing-point so long as the vapour is suspended among the particles of
a permanent gas. Between calcium carbide and water vapour a double
decomposition occurs chemically identical with that between carbide and
liquid water; but the physical effect of the reaction and its practical
bearings are considerably modified. The quantity of heat liberated when
30 parts by weight of steam react with 64 parts of calcium carbide should
be essentially unaltered from that evolved when the reagent is in the
liquid state; but the temperature likely to be attained when the speed of
reaction remains the same as before will be considerably higher for two
conspicuous reasons. In the first place, the specific heat of steam in is
only 0.48, while that of liquid water is 1.0. Hence, the quantity of heat
which is sufficient to raise the temperature of a given weight of liquid
water through _n_ thermometric degrees, will raise the temperature
of the same weight of water vapour through rather more than 2 _n_
degrees. In the second place, that relatively large quantity of heat
which in the case of liquid water merely changes the liquid into a
vapour, becoming "latent" or otherwise unrecognisable, and which, as
already shown, forms roughly five-sixths of the total heat needed to
convert cold water into steam, has no analogue if the water has
previously been vaporised by other means; and therefore the whole of the
heat supplied to water vapour raises its sensible temperature, as
indicated by the thermometer. Thus it appears that, except for the
sufficient amount of cooling that can be applied to a large vessel
containing carbide by surrounding it with a water jacket, there is no way
of governing its temperature satisfactorily if water vapour is allowed to
act upon a mass of carbide--assuming, of course, that the reaction
proceeds at any moderate speed, _e.g._, at a rate much above that
required to supply one or two burners with gas.

The decomposition which with perfect chemical accuracy has been stated to
occur quantitatively between 36 parts by weight, of water and 64 parts of
calcium carbide scarcely ever takes place in so simple a fashion in an
actual generator. Owing to the heat developed when carbide is in excess,
about half the water is converted into vapour; and so the reaction
proceeds in two stages: half the water added reacting with the carbide as
a liquid, the other half, in a state of vapour, afterwards reacting
similarly, [Footnote: This secondary reaction is manifestly only another
variety of the phenomenon known as "after-generation" (cf. _ante_).
After-generation is possible between calcium carbide and mechanically
damp slaked lime, between carbide and damp gas, or between carbide and
calcium hydroxide, as opportunity shall serve. In all cases the carbide
must be in excess.] or hardly reacting at all, as the case may be.
Suppose a vessel, A B, somewhat cylindrical in shape, is charged with
carbide, and that water is admitted at the end called A. Suppose now (1)
that the exit for gas is at the opposite end, B. As the lumps near A are
attacked by half the liquid introduced, while the other half is changed
into steam, a current, of acetylene and water vapour travels over the
charge lying between the decomposing spot and the end B. During its
passage the second half of the water, as vapour, reacts with the excess
of carbide, the first make of acetylene being dried, and more gas being
produced. Thus a second quantity of heat is developed, equal by theory to
that previously evolved; but a second elevation in temperature, far more
serious, and far less under control, than the former also occurs; and
this is easily sufficient to determine some of those undesirable effects
already described. Digressing for a moment, it may be admitted that the
desiccation of the acetylene produced in this manner is beneficial, even
necessary; but the advantages of drying the gas at this period of its
treatment are outweighed by the concomitant disadvantages and by the
later inevitable remoistening thereof. Suppose now (2) that both the
water inlet and the gas exit of the carbide cylinder are at the same end,
A. Again half the added water, as liquid, reacts with the carbide it
first encounters, but the hot stream of damp gas is not permitted to
travel over the rest of the lumps extending towards B: it is forced to
return upon its steps, leaving B practically untouched. The gas
accordingly escapes from the cylinder at A still loaded with water
vapour, and for a given weight of water introduced much less acetylene is
evolved than in the former case. The gas, too, needs drying somewhere
else in the plant; but these defects are preferable to the apparent
superiority of the first process because overheating is, or can be, more
thoroughly guarded against.

PRESSURE IN GENERATORS.--Inasmuch as acetylene is prone to dissociate or
decompose into its elements spontaneously whenever its pressure reaches 2
atmospheres or 30 lb. per square inch, as well as when its temperature at
atmospheric pressure attains 780° C., no pressure approaching that of 2
atmospheres is permissible in the generator. A due observance of this
rule, however, unlike a proper maintenance of a low temperature in an
acetylene apparatus, is perfectly easy to arrange for. The only reason
for having an appreciable positive pressure in any form of generating
plant is that the gas may be compelled to travel through the pipes and to
escape from the burner orifices; and since the plant is only installed to
serve the burners, that pressure which best suits the burners must be
thrown by the generator or its holder. Therefore the highest pressure it
is ever requisite to employ in a generator is a pressure sufficient
(_a_) to lift the gasholder bell, or to raise the water in a
displacement holder, (_b_) to drive the gas through the various
subsidiary items in the plant, such as washers and purifiers, (_c_)
to overcome the friction in the service-pipes, [Footnote: This friction
manifestly causes a loss of pressure, _i.e._, a fall in pressure, as
a gas travels along a pipe; and, as will be shown in Chapter VII., it is
the fall in pressure in a pipe rather than the initial pressure at which
a gas enters a pipe that governs the volume of gas passing through that
pipe. The proper behaviour and economic working of a burner (acetylene or
other, luminous or incandescent) naturally depend upon the pressure in
the pipe to which the burner is immediately attached being exactly suited
to the design of that burner, and have nothing to do with the fall in
pressure occurring in the delivery pipes. It is therefore necessary to
keep entirely separate the ideas of proper burner pressure and of maximum
desirable fall in pressure within the service due to friction.] and
(d) to give at the points of combustion a pressure which is
required by the particular burners adopted. In all except village or
district installations, (_c_) may be virtually neglected. When the
holder has a rising bell, (_a_) represents only an inch or so of
water; but if a displacement holder is employed the pressure needed to
work it is entirely indeterminate, being governed by the size and shape
of the said holder. It will be argued in Chapter III. that a rising
holder is always preferable to one constructed on the displacement
principle. The pressure (d) at the burners may be taken at 4
inches of water as a maximum, the precise figure being dependent upon the
kind of burners--luminous, incandescent, boiling, &c.--attached to the
main. The pressure (_b_) also varies according to circumstances, but
averages 2 or 3 inches. Thus a pressure in the generator exceeding that
of the atmosphere by some 12 inches of water--_i.e._, by about 7
oz., or less than half a pound per square inch--is amply sufficient for
every kind of installation, the less meritorious generators with
displacement holders only excepted. This pressure, it should be noted, is
the net or effective pressure, the pressure with which the gas raises the
liquid in a water-gauge glass out of the level while the opposite end of
the water column is exposed to the atmosphere. The absolute pressure in a
vessel containing gas at an effective pressure of 12 inches of water is 7
oz. plus the normal, insensible pressure of the atmosphere itself--say
15-1/4 lb. per square inch. The liquid in a barometer which measures the
pressure of the atmosphere stands at a height of 30 inches only, because
that liquid is mercury, 13.6 times as heavy as water. Were it filled with
water the barometer would stand at (30 X 13.6) = 408 inches, or 34 feet,
approximately. Gas pressures are always measured in inches of water
column, because expressed either as pounds per square inch or as inches
of mercury, the figures would be so small as to give decimals of unwieldy
length.

It would of course be perfectly safe so to arrange an acetylene plant
that the pressure in the generating chamber should reach the 100 inches
of water first laid down by the Home Office authorities as the maximum
allowable. There is, however, no appreciable advantage to be gained by so
doing, or by exceeding that pressure which feeds the burners best. Any
higher original pressure involves the use of a governor at the exit of
the plant, and a governor is a costly and somewhat troublesome piece of
apparatus that can be dispensed with in most single installations by a
proper employment of a well-balanced rising holder.



CHAPTER III

THE GENERAL PRINCIPLES OF ACETYLENE GENERATION--ACETYLENE GENERATING
APPARATUS

Inasmuch as acetylene is produced by the mere interaction of calcium
carbide and water, that is to say, by simply bringing those two
substances in the cold into mutual contact within a suitable closed
space, and inasmuch as calcium carbide can always be purchased by the
consumer in a condition perfectly fit for immediate decomposition, the
preparation of the gas, at least from the theoretical aspect, is
characterised by extreme simplicity. A cylinder of glass or metal, closed
at one end and open at the other, filled with water, and inverted in a
larger vessel containing the same liquid, may be charged almost
instantaneously with acetylene by dropping into the basin a lump of
carbide, which sinks to the bottom, begins to decompose, and evolves a
rapid current of gas, displacing the water originally held in the
inverted cylinder or "bell." If a very minute hole is drilled in the top
of the floating bell, acetylene at once escapes in a steady stream, being
driven out by the pressure of the cylinder, the surplus weight of which
causes it to descend into the water of the basin as rapidly as gas issues
from the orifice. As a laboratory experiment, and provided the bell has
been most carefully freed from atmospheric air in the first instance,
this escaping gas may be set light to with a match, and will burn with a
more or loss satisfactory flame of high illuminating power. Such is an
acetylene generator stripped of all desirable or undesirable adjuncts,
and reduced to its most elementary form; but it is needless to say that
so simple an apparatus would not in any way fulfil the requirements of
everyday practice.

Owing to the inequality of the seasons, and to the irregular nature of
the demand for artificial light and heat in all households, the capacity
of the plant installed for the service of any institution or district
must be amply sufficient to meet the consumption of the longest winter
evening--for, as will be shown in the proper place, attempts to make an
acetylene generator evolve gas more quickly than it is designed to do are
fraught with many objections--while the operation of the plant, must be
under such thorough control that not only can a sudden and unexpected
demand for gas be met without delay, but also that a sudden and
unexpected interruption or cessation of the demand shall not be followed
by any disturbance in the working of the apparatus. Since, on the one
hand, acetylene is produced in large volumes immediately calcium carbide
is wetted with water, so that the gas may be burnt within a minute or two
of its first evolution; and, on the other, that acetylene once prepared
can be stored without trouble or appreciable waste for reasonable periods
of time in a water-sealed gasholder closely resembling, in everything but
size, the holders employed on coal-gas works; it follows that there are
two ways of bringing the output of the plant into accord with the
consumption of the burners. It is possible to make the gas only as and
when it is required, or it is possible in the space of an hour or so,
during the most convenient part of the day, to prepare sufficient to last
an entire evening, storing it in a gasholder till the moment arrives for
its combustion. It is clear that an apparatus needing human attention
throughout the whole period of activity would be intolerable in the case
of small installations, and would only be permissible in the case of
larger ones if the district supplied with gas was populous enough to
justify the regular employment of two men at least in or about the
generating station. But with the conditions obtaining in such a country
as Great Britain, and in other lands where coal is equally cheap and
accessible, if a neighbourhood was as thickly populated as has been
suggested, it would be preferable on various grounds to lay down a coal-
gas or electricity works; for, as has been shown in the first chapter,
unless a very material fall in the price of calcium carbide should take
place--a fall which at present is not to be expected--acetylene can only
be considered a suitable and economical illuminant and heating agent for
such places as cannot be provided cheaply with coal-gas or electric
current. To meet this objection, acetylene generators have been invented
in which, broadly speaking, gas is only produced when it is required,
control of the chemical reaction devolving upon some mechanical
arrangement. There are, therefore, two radically different types of
acetylene apparatus to be met with, known respectively as "automatic" and
"non-automatic" generators. In a non-automatic generator the whole of the
calcium carbide put into the apparatus is more or less rapidly
decomposed, and the entire volume of gas evolved from it is collected in
a holder, there to await the moment of consumption. In an automatic
apparatus, by means of certain devices which will be discussed in their
proper place, the act of turning on a burner-tap causes some acetylene to
be produced, and the act of turning it off brings the reaction to an end,
thus obviating the necessity for storage. That, at any rate, is the
logical definition of the two fundamentally different kinds of generator:
in automatic apparatus the decomposition of the carbide is periodically
interrupted in such fashion as more or less accurately to synchronise
with the consumption of gas; in the non-automatic variety decomposition
proceeds without a break until the carbide vessels are empty.
Unfortunately a somewhat different interpretation of these two words has
found frequent acceptance, a generator being denominated non-automatic or
automatic according as the holder attached to it is or is not large
enough to store the whole of the acetylene which the charge of carbide is
capable of producing if it is decomposed all at once. Apart from the fact
that a holder, though desirable, is not an absolutely indispensable part
of an acetylene plant, the definition just quoted was sufficiently free
from objection in the earliest days of the industry; but now efficient
commercial generators are to be met with which become either automatic or
non-automatic according to the manner of working them, while some would
be termed non-automatic which comprise mechanism of a conspicuously self-
acting kind.

AUTOMATIC AND NON-AUTOMATIC GENERATORS.--Before proceeding to a detailed
description of the various devices which may be adopted to render an
acetylene generator automatic in action, the relative advantages of
automatic and non-automatic apparatus, irrespective of type, from the
consumer's point of view may be discussed. The fundamental idea
underlying the employment of a non-automatic generator is that the whole
of the calcium carbide put into the apparatus shall be decomposed into
acetylene as soon after the charge is inserted as is natural in the
circumstances; so that after a very brief interval of time the generating
chambers shall contain nothing but spent lime and water, and the holder
be as full of gas as is ever desirable. In an automatic apparatus, the
fundamental idea is that the generating chamber, or one at least of
several generating chambers, shall always contain a considerable quantity
of undecomposed carbide, and some receptacle always contain a store of
water ready to attack that carbide, so that whenever a demand for gas
shall arise everything may be ready to meet it. Inasmuch as acetylene is
an inflammable gas, it possesses all the properties characteristic of
inflammable gases in general; one of which is that it is always liable to
take fire in presence of a spark or naked light, and another of which is
that it is always liable to become highly explosive in presence of a
naked light or spark if, accidentally or otherwise, it becomes mixed with
more than a certain proportion of air. On the contrary, in the complete
absence of liquid or vaporised water, calcium carbide is almost as inert
a body as it is possible to imagine: for it will not take fire, and
cannot in any circumstances be made to explode. Hence it may be urged
that a non-automatic generator, with its holder always containing a large
volume of the actually inflammable and potentially explosive acetylene,
must invariably be more dangerous than an automatic apparatus which has
less or practically no ready-made gas in it, and which simply contains
water in one chamber and unaltered calcium carbide in another. But when
the generating vessels and the holder of a non-automatic apparatus are
properly designed and constructed, the gas in the latter is acetylene
practically free from air, and therefore while being, as acetylene
inevitably is, inflammable, is devoid of explosive properties, always
assuming, as must be the case in a water-sealed holder, that the
temperature of the gas is below 780° C.; and also assuming, as must
always be the case in good plant, that the pressure under which the gas
is stored remains less than two atmospheres absolute. It is perfectly
true that calcium carbide is non-inflammable and non-explosive, that it
is absolutely inert and incapable of change; but so comprehensive an
assertion only applies to carbide in its original drum, or in some
impervious vessel to which moisture and water have no access. Until it is
exhausted, an automatic acetylene generator contains carbide in one place
and water in another, dependence being put upon some mechanical
arrangement to prevent the two substances coming into contact
prematurely. Many of the devices adopted by builders of acetylene
apparatus for keeping the carbide and water separate, and for mixing them
in the requisite quantities when the proper time arrives, are as
trustworthy, perhaps, as it is possible for any automatic gear to be; but
some are objectionably complicated, and a few are positively inefficient.
There are two difficulties which the designer of automatic mechanism has
to contend with, and it is doubtful whether he always makes a sufficient
allowance for them. The first is that not only must calcium carbide and
liquid water be kept out of premature contact, but that moisture, or
vapour of water, must not be allowed to reach the carbide; or
alternatively, that if water vapour reaches the carbide too soon, the
undesired reaction shall not determine overheating, and the liberated gas
be not wasted or permitted to become a source of danger. The second
difficulty encountered by the designer of automata is so to construct his
apparatus that it shall behave well when attended to by completely
unskilled labour, that it shall withstand gross neglect and resist
positive ill-treatment or mismanagement. If the automatic principle is
adopted in any part of an acetylene apparatus it must be adopted
throughout, so that as far as possible--and with due knowledge and skill
it is completely possible--nothing shall be left dependent upon the
memory and common sense of the gasmaker. For instance, it must not be
necessary to shut a certain tap, or to manipulate several cocks before
opening the carbide vessel to recharge it; it must not be possible for
gas to escape backwards out of the holder; and either the carbide-feed
gear or the water-supply mechanism (as the case may be) must be
automatically locked by the mere act of taking the cover off the carbide
store, or of opening the sludge-cock at the bottom. It would be an
advantage, even, if the purifiers and other subsidiary items of the plant
were treated similarly, arranging them in such fashion that gas should be
automatically prevented from escaping out of the rest of the apparatus
when any lid was removed. In fact, the general notion of interlocking,
which has proved so successful in railway signal-cabins and in
carburetted water gas-plant for the prevention of accidents duo to
carelessness or overnight, might be copied in principle throughout an
acetylene installation whenever the automatic system is employed.

It is no part of the present argument, to allege that automatic
generators are, and must always be, inherently dangerous. Automatic
devices of a suitable kind may be found in plenty which are remarkably
simple and highly trustworthy; but it would be too bold a statement to
say that any such arrangement is incapable of failure, especially when
put into the hands of a person untrained in the superintendence of
machinery. The more reliable a piece of automatic mechanism proves itself
to be, the more likely is it to give trouble and inconvenience and
utterly to destroy confidence when it does break down; because the better
it has behaved in the past, and the longer it has lasted without
requiring adjustment, the less likely is it that the attendant will be at
hand when failure occurs. By suitable design and by an intelligent
employment of safety-valves and blow-off pipes (which will be discussed
in their proper place) it is quite easy to avoid the faintest possibility
of danger arising from an increase of pressure or an improper
accumulation of gas inside the plant or inside the building containing
the plant; but every time such a safety-valve or blow-off pipe comes into
action a waste of gas occurs, which means a sacrifice of economy, and
shows that the generator is not working as it should.

As glass is a fragile and brittle substance, and as it is not capable of
bearing large, rapid, and oft-repeated alterations of temperature in
perfect safety, it is not a suitable material for the construction of
acetylene apparatus or of portions thereof. Hence it follows that a
generator must be built of some non-transparent material which prevents
the interior being visible when the apparatus is at work. Although it is
comparatively easy, by the aid of a lamp placed outside the generator-
shed in such a position as to throw its beams of light through a window
upon the plant inside, to charge a generator after dark; and although it
is possible, without such assistance, by methodical habits and a
systematic arrangement of utensils inside the building to charge a
generator even in perfect darkness, such an operation is to be
deprecated, for it is apt to lead to mistakes, it prevents any slight
derangement in the installation from being instantly noticed, and it
offers a temptation to the attendant to break rules and to take a naked
light with him. On all those grounds, therefore, it is highly desirable
that every manipulation connected with a generator shall be effected
during the daytime, and that the apparatus-house shall be locked up
before nightfall. But owing to the irregular habits engendered by modern
life it is often difficult to know, during any given day, how much gas
will be required in the ensuing evening; and it therefore becomes
necessary always to have, as ready-made acetylene, or as carbide in a
proper position for instant decomposition, a patent or latent store of
gas more than sufficient in quantity to meet all possible requirements.
Now, as already stated, a non-automatic apparatus has its store of
material in the form of gas in a holder; and since this is preferably
constructed on the rising or telescopic principle, a mere inspection of
the height of the bell--on which, if preferred, a scale indicating its
contents in cubic feet or in burner-hours may be marked--suffices to show
how near the plant is to the point of exhaustion. In many types of
automatic apparatus the amount of carbide remaining undecomposed at any
moment is quite unknown, or at best can only be deduced by a tedious and
inexact calculation; although in some generators, where the store of
carbide is subdivided into small quantities, or placed in several
different receptacles, an inspection of certain levers or indicators
gives an approximate idea as to the capacity of the apparatus for further
gas production. In any case the position of a rising holder is the most
obvious sign of the degree of exhaustion of a generator; and therefore,
to render absolutely impossible a failure of the light during an evening,
a non-automatic generator fitted with a rising holder is best.

Since calcium carbide is a solid body having a specific gravity of 2.2,
water being unity, and since 1 cubic foot of water weighs 62.4 lb., in
round numbers 137 lb. of _compact_ carbide only occupy 1 cubic foot
of space. Again, since acetylene is a gas having a specific gravity of
0.91, air being unity, and since the specific gravity of air, water being
unity, is 0.0013, the specific gravity of acetylene, water being unity,
is roughly O.00116. Hence 1 cubic foot of acetylene weighs roughly 0.07
lb. Furthermore, since 1 lb. of good carbide evolves 5 cubic feet of gas
on decomposition with water, acetylene stored at atmospheric pressure
occupies roundly 680 times as much space as the carbide from which it has
been evolved. This figure by no means represents the actual state of
affairs in a generator, because, as was explained in the previous
chapter, a carbide vessel cannot be filled completely with solid; and,
indeed, were it so "filled," in ordinary language, much of its space
would be still occupied with air. Nevertheless it is incontrovertible
that an acetylene plant calculated to supply so many burners for so long
a period of time must be very much larger if it is constructed on the
non-automatic principle, when the carbide is decomposed all at once, than
if the automatic system is adopted, when the solid remains unattacked
until a corresponding quantity of gas is required for combustion. Clearly
it is the storage part of a non-automatic plant alone which must be so
much larger; the actual decomposing chambers may be of the same size or
even smaller, according to the system of generation to which the
apparatus belongs. In practice this extra size of the non-automatic plant
causes it to exhibit two disadvantages in comparison with automatic
apparatus, disadvantages which are less serious than they appear, or than
they may easily be represented to be. In the first place, the non-
automatic generator requires more space for its erection. If acetylene
were an illuminating agent suitable for adoption by dwellers in city or
suburb, where the back premises and open-air part of the messuage are
reduced to minute proportions or are even non-existent, this objection
might well be fatal. But acetylene is for the inhabitant of a country
village or the occupier of an isolated country house; and he has usually
plenty of space behind his residence which he can readily spare. In the
second place, the extra size of the non-automatic apparatus makes it more
expensive to construct and more costly to instal. It is more cosily to
construct and purchase because of its holder, which must be well built on
a firm foundation and accurately balanced; it is more costly to instal
because a situation must be found for the erection of the holder, and the
apparatus-house may have to be made large enough to contain the holder as
well as the generator itself. As regards the last point, it may be said
at once that there is no necessity to place the holder under cover: it
may stand out of doors, as coal-gas holders do in England, for the seal
of the tank can easily be rendered frost-proof, and the gas itself is not
affected by changes of atmospheric temperature beyond altering somewhat
in volume. In respect of the other objections, it must be remembered that
the extra expense is one of capital outlay alone, and therefore only
increases the cost of the light by an inappreciable amount, representing
interest and depreciation charges on the additional capital expenditure.
The increased cost of a year's lighting due to these charges will amount
to only 10 or 15 per cent, on the additional capital sunk. The extra
capital sunk does not in any way increase the maintenance charges; and
if, by having a large holder, additional security and trustworthiness are
obtained, or if the holder leads to a definite, albeit illusive, sense of
extra security and trustworthiness, the additional expenditure may well
be permissible or even advantageous.

The argument is sometimes advanced that inasmuch as for the same, or a
smaller, capital outlay as is required to instal a non-automatic
apparatus large enough to s

Showing first 200,000 characters. Full text: gutenberg.org/ebooks/8144