
Gutenberg · ebook 7981
Synthetic Tannins, Their Synthesis, Industrial Production and Application
by Georg Grasser · English · public domain in the US
AUTHOR'S PREFACE
Whilst the synthesis of the natural tannins has been successfully outlined by Emil Fischer, it has been left to the Chemical Industry, notably the Badische Anilin und Soda-fabrik in Ludwigshafen-on-the-Rhine, to discover the means of making possible the production of the synthetic tannins.
The scientific results of Fischer's researches are to-day common knowledge, and these, together with questions arising therefrom, will only be lightly touched upon in the book herewith presented. Even an attempt at enumerating the present synthetic tannins has so far not been published, and I have therefore availed myself of the opportunity of making a brief summary of them.
My work at the B.A.S.F. deepened my insight in this new field; ample opportunity of applying these synthetic products in practice was given me when, as a result of the war, I was appointed technical consultant to the Austrian Hide and Leather Commission, and in this capacity was called upon to act as general adviser to the trade. The ultimate object of my scientific researches was then to investigate the chemistry of this particular field, and this has led me to present a picture, complete as far as it goes, of this branch of chemical technology.
The intention of the present volume is to communicate to the reader what has so far been scientifically evolved and practically applied in this field. First of all, however, it may illustrate the extreme importance and the universal applicability of the synthetic tannins in the making of leather. The modern leather industry cannot, to-day, be without these important products, but also in those tanneries, where the synthetic tannins have not so far been regarded as indispensable, their use is strongly recommended.
Just as in the case of the coal-tar dyes, the synthetic tannins will make us independent of foreign supplies, and thus keep within our own borders the vast sum of money required in former days for the purchase of foreign tanning materials. May this book prove the means of providing an incentive for a still wider application of the synthetic tannins.
GRASSER.
GRAZ, August 1920.
TRANSLATOR'S PREFACE
Doctor Grasser hardly needs an introduction to the leather trade of this country in its scientific aspect, but if one be sought for, none could serve the purpose better than a translation of the book herewith presented to the British-speaking public.
Viewed with curiosity from their start, the synthetic tannins needed--like many other important discoveries--an extreme emergency for the purpose of showing their value. The Great War provided the opportunity of which chemical industry was to avail itself, and to-day we do not only see synthetic tannins placed upon the market as a veritable triumph of chemical technology and a creditable triumph of manufacturing chemistry; we also see their immensely practical qualities established as a fact, and, as the author aptly remarks, no modern tanner can to-day dissociate himself from the use of synthetic tannins for the production of leather in the true sense of this word.
There is no branch of leather-making where synthetic tannins cannot help and improve processes already established.
The immense number of substances patented by German manufacturing chemists for the purpose of producing synthetic tanning materials is almost staggering. In view of this fact it is doubly pleasing to see that British chemists have found new ways, and are able to produce equally good and more varied synthetic tannins than has hitherto been deemed possible. The originator of these products and his acolytes must at least share the credit with those who, in spite of the limitations necessarily set by the former, have been able to find new and better ways.
In his book Dr. Grasser gives a short review of the necessary forerunner of any work upon synthetic tannins: the investigations and syntheses of the natural tannins. It is certainly to be hoped that we may soon see such works as those of Fischer's and Freudenberg's, recently published, translated into English.
For the guidance of the reader it may be noted that a short account of the works of these authors may be found in the Journal of the Society of Leather Trades' Chemists, vol. v. (May issue); in addition to this some of the matter contained in the chapter on synthesis of tanning matters appeared in the January 1921 issue of the Journal of the American Leather Chemists' Association.
In addition to these two sections, the last part of this book deals with the practical applications of synthetic tannins, and it is hoped that the tanner will find much valuable information in these pages. The main outlines of the synthesis of tanning matters should prove of great value to the chemist engaged in this branch of chemical technology.
The translator takes great pleasure in the acknowledging the valuable assistance rendered him by Mr. Robin Bruce Croad, A.R.T.C., F.I.C., and by Mr. Arthur Harvey.
F. G. A. ENNA
CONTENTS
Introduction: Classification of Synthetic Tannins
PART I
SECTION I
The Synthesis of Vegetable Tannins
- Tannin
- Digallic Acid
- Ellagic Acid
- Depsides
Carbomethoxylation of Hydroxybenzoic Acids
Chlorides of Carbomethoxyhydroxybenzoic Acids
Preparation of Didepsides
Preparation of Tridepsides
Preparation of Tetradepsides
Tannoid Substances of the Tannin Type
Chart showing the Decomposition of Products of Tannin
SECTION II
Synthesis of Tanning Matters
- Aromatic Sulphonic Acids
- Condensation of Phenols
Condensation of Hydroxybenzene
Condensation of Dihydroxybenzene
Trihydroxy benzene
Polyhydroxybenzenes
Quinone
Phenolic Ethers
Nitro Bodies
Amino Bodies
Aromatic Alcohols
Aromatic Acids
3. Condensation of Naphthalene Derivatives
4. Condensation of the Anthracene Group
5. Di- and Triphenylmethane Groups
6. Summary
Table
SECTION III
Tanning Effects of Mixtures and Natural Products
- Mixture of Phenolsulphonic Acid and Formaldehyde
- Mixture of Phenolsulphonic Acid and Natural Tannins
- Tanning Effects of Different Natural Substances
SECTION IV
Methods of Examining Tanning Matters
PART II
Synthetic Tannins: Their Industrial Production and Application
A. Condensation of Free Phenolsulphonic Acid B. Condensation of Partly Neutralised Phenolsulphonic Acid C. Condensation of Completely Neutralised Phenolsulphonic Acid D. Condensation of Cresolsulphonic Acid E. Relative Behaviour of an Alkaline Solution of Bakelite and Natural Tannins F. Dicresylmethanedisulphonic Acid (Neradol D)
- Neradol D Reactions
- Electro-Chemical Behaviour of Neradol D
- The Influence of Salts and Acid Contents
on the Tanning Effect of Neradol D
4. Phlobaphene Solubilising Action of Neradols
5. Effect of Neradol D on Pelt
6. Reactions of Neradol D with Iron and Alkalies
7. Reagents suitable for Demonstrating the
Various Stages of Neradol D Tannage
8. Combination Tannages with Neradol D
(1) Chrome Neradol D Liquors
(2) Aluminum Salts and Neradol
(3) Fat Neradol D Tannage
9. Analysis of Leather containing Neradol D
10. Properties of Leather Tanned with Neradol D
11. Neradol D, Free from Sulphuric Acid
12. Neutral Neradol
G.
Different Methods of Condensation as Applied to
Phenolsulphonic Acid
1. Condensation Induced by Heat
2. Condensation with Sulphur Chloride
3. Condensation with Phosphorus Compounds
4. Condensation with Aldehydes
5. Condensation with Glycerol
REGISTER OF AUTHORS
INDEX
INTRODUCTION
CLASSIFICATION OF SYNTHETIC TANNINS
In laying down a definition of "Synthetic Tannins," it is first of all necessary to clearly define the conception of "tannin." Primarily, tannins may be considered those substances of vegetable origin which may be found, as water-soluble bodies, in many plants, exhibiting certain chemical behaviour, possessing astringent properties and being capable of converting animal hide into leather.
This latter property of the tannins, that of converting the easily decomposable protein of animal hide into a permanently conserved substance and imparting to this well-defined and technically valuable properties, has become the criterion of the practical consideration of a tannin. It appears that different substances certainly show the chemical reactions peculiar to the tannins, and to a certain extent also exhibit astringent character without, however, possessing the important property peculiar to the tannins of converting hide into leather.
Such substances, in our present-day terminology, are termed pseudo-tannins (e.g., the "tannin" contained in coffee-beans). Decomposition products of the natural tannins, to which belong, for instance, gallic acid and the dihydroxybenzenes, exhibit the well-known reactions of the tannins (coloration with iron salts), but they cannot be regarded as tannins from either a technical or a physiological standpoint.
As regards their chemical constitution, the natural (true) tannins probably belong to different groups of organic compounds, and with our present-day scant knowledge of their chemistry, it is impossible to classify them. One is, however, justified in assuming that both the natural tannins and the related humic acids are ester-derivatives of hydroxybenzoic acids. [Footnote: E. Fischer, Ber., 1913, 46, 3253.]
The production of synthetic tannins employs two quite distinct methods; one is to synthesise the most simple tannin, viz., the tannic acid contained in galls (tannin), or to build up substances similar in character to the tannins, from hydroxybenzoic acids. The other, entirely new way, is to produce chemical substances, which certainly have nothing in common with the constitution of the natural tannins, but which behave like true tannins in contact with animal pelt, and in addition, since they can be manufactured on a commercial scale, are of practical value.
Owing to the fact that, until recently, the constitution of tannin has remained unknown, it is easy to comprehend that the efforts to synthesise the latter substance, or compounds similar to it, have been mainly attempted on similar lines. The oldest investigation in this direction dates from H. Schiff,[Footnote: Liebig's Ann., 1873, 43, 170.] who prepared substances similar to tannin by dehydrating hydroxybenzoic acids.
By allowing phosphorus oxychloride to interact with phenolsulphonic acid, he obtained a well-defined substance possessing tanning properties, which he considered an esterified phenolsulphonic acid anhydride, the composition of which he determined as HO.C_6H_4.SO_2.O.C_6H_4HSO_3. It is, however, probable that this substance is not homogeneous, but consists of a mixture of higher condensation products.
Klepl [Footnote: Jour. pr. Chem., 1883, 28, 208.] obtained--by simply heating p-hydroxybenzoic acid--a so-called di- and tridepside, but this simple method is not applicable to many other hydroxybenzoic acids, since these are decomposed by the high temperature required to induce reaction.
Amongst other attempts to produce condensation products with characteristics similar to those possessed by the tannins, those by Gerhardt [Footnote: Liebig's Ann, 1853, 87, 159.] and Loewe [Footnote: Jahresh. f. Chem., 1868, 559.] must be especially noted; they treated gallic acid with phosphorus oxychloride or arsenic acid, and thereby obtained amorphous compounds, exhibiting the reactions characteristic of tanning substances. E.
Fischer and Freudenberg, [Footnote: Liebig's Ann., 372, 45.] by treating p-hydroxybenzoic acid in the same way, succeeded in obtaining a didepside, and during the last years practically only these two investigators have demonstrated the syntheses of these depsides and produced high-molecular polydepsides.
At the same time researches were instituted with the object of determining the constitution of tannin, and E. Fischer succeeded in demonstrating its probable composition as being that of a glucoside containing 5 molecules of digallic acid per 1 molecule of glucose.
This last-named class of synthetic tannins--which may be properly termed "tanning matters" in contradistinction to the true tannins--exhibit very distinct tanning character when brought in contact with animal hide, but from the point of view of chemical constitution have nothing in common with the natural tannins. Not only are they of interest to the industry from a practical point of view; they have also been examined very closely from a chemical standpoint.
It is, however, necessary to differentiate with great exactitude between the conception of true tanning effect and pickling effect when considering the action of chemical substances on pelt (i.e., animal hide, treated with lime, depilated, and the surplus flesh removed).
Whereas any true tannage is characterised by the complete penetration of the substance and its subsequent fixation by the pelt in such a way that a thorough soaking and washing will not bring about a reconversion (of the leather) to the pelt state; pickling, on the other hand, is only characterised by the penetration of the substance in the pelt and fixation to such an extent that a subsequent washing of the pickled pelt will bring back the latter to a state closely approximating that of a true pelt.
Simple as such a differentiation appears, there are still a number of cases occupying a position between the two referred to, and which we may term pseudo-tannage. An example of the latter is formaldehyde tannage; formaldehyde has for a long time been employed in histological work for the purpose of hardening animal hide, by which it is readily absorbed from solution whereby it hardens the hide without, however, swelling it.
A hide which has thus been treated with formaldehyde absorbs the natural tannins with greater ease; this, on the one hand, argues the probability of formaldehyde acting as a pickling agent; on the other hand, it is also one of its characteristics that it will either in neutral acid, [Footnote: R. Combret, Ger. Pat, 112, 183.] or, still better, in alkaline [Footnote: J. Pullman, Ger. Pat, 111,408; Griffith, Lea. Tr. Rev., 1908.] solution, convert pelt into leather.
In a formaldehyde-tanned leather, however, no trace of tannin can be detected; and the yield (of leather, based on the pelt employed), which, from a practical standpoint, is so important, is so very low that it is hardly possible to speak of it as a tannin in the ordinary sense of the word. Formaldehyde must, therefore, be termed a pseudo-tannin.
The tanning effect of formaldehyde is, according to Thuau, [Footnote: Collegium, 1909, 363, 211.] increased by those salts which bring about colloidal polymerisation of the formaldehyde, the resultant compounds being absorbed by the hide fibre. Fahrion considers this to be a true tannage, and is supported by Nierenstein [Footnote: Ibid., 1905, 157, 159.]:--
R.NH_2 R.NH-|
+O.C.H. = CH_2 + H_2O
R.NH_2 | R.NH-|
(Hide.) H (Leather.)
A peculiar combination between true tannage and pickling is to be found in the tawing process (tannage with potash, alum, and salt), whereby, firstly, the salt and the acid character of the alum produce a pickling effect, and secondly, the alum at the same time is hydrolysed, and its dissociation components partly adsorbed by the hide, thereby effecting true tannage. This double effect is still more pronounced in the synthetic tannins which contain colloidal bodies of pronounced tanning intensity on the one hand, inorganic and organic salts on the other, which then act as described above. Their real mode of action can only be explained with the aid of experimental data.
The following chapters will deal with the different behaviour of the various groups of synthetic tannins.
PART I
SECTION I
THE SYNTHESIS OF VEGETABLE TANNINS
1. TANNIN
The first investigations of gall-tannin date from the year 1770, at which time, however, no exact differentiation between tannin and gallic acid was made. The first step in this direction was made when Scheele,[Footnote: Grell's Chem. Ann., 1787, 3, I.] in 1787, discovered gallic acid in fermented gall extract, and in the same year Kunzemuller [Footnote:Ibid., 1787,3,413.] separated gallic acid (or pyrogallol) as a crystalline body from oak galls. Dize [Footnote: Jour.
Chim. et Phys., 1791, 399.] continued the investigations, which were brought to a conclusion with Deyeux' work [Footnote: Ann. Chim., 1793, 17, I.]; both recognised that the substance isolated was not a single substance, but was a mixture of gallic acid, a green colouring matter, a rosin (tannin?), and extraneous matter. Proust [Footnote: Ibid., 1799, 25, 225.] was the first to differentiate the crystalline gallic acid from the amorphous, astringent substance, which latter he named "Tannin."
Amongst the numerous subsequent investigations of tannin must be especially noted the one by Berzelius [Footnote: Pogg,Ann., 1827, 10, 257.], who purified the potash salt and decomposed this with sulphuric acid. Pelouze [Footnote: Liebig's Ann., 1843, 47, 358.], later on, observed the formation of the crystalline gallic acid from tannin, when the latter is boiled with sulphuric acid; this had already been observed by J. Liebig.[Footnote: _Ibid._1843, 39, 100.] Both had noticed the absence of nitrogen. In addition to the methods of preparation of tannin then in vogue neutral solvents were mainly employed by subsequent investigators; Pelouze [Footnote: Jour. Prakt.
Chem., 1834, 2, 301, and 328.] treated powdered galls with ether containing alcohol and water, and considered the upper layer to be a solution of gallic acid and impurities, the bottom layer to contain the pure tannin.
The EMPIRICAL FORMULA of tannin has also been the subject of much speculation by the different investigators, the difficulty here being that of obtaining a pure specimen of the substance free from sugars, and which could be submitted to elementary analysis. Whereas these early purified substances were thought to correspond to the formula of digallic acid (galloylgallic acid), C_14H_10O_9, Fischer and Freudenberg [Footnote: Ber., 1912, 915 and 2709.] were able to show, with approximate certainty, that the constitution of tannin is that of a pentadigalloyl glucose.
Early attempts at hydrolysing tannin gave varying results, some investigators claiming the presence, and others the absence of sugars. Here, again, E. Fischer and Freudenberg [Footnote: Ibid.] were able to conclusively prove that on hydrolysing tannin with dilute acids, 7.9 per cent. glucose is dissociated, and that hence glucose forms part of the tannin molecule. Fischer and Freudenberg also determined the optical activity of pure tannin in water: [Greek: a]_D was found to lie between +58° and +70°.
Graham found [Footnote: Phil. Transact., 1861, 183.] that the tannin molecule is of considerable size, since its diffusion velocity is 200 times less than that of common salt. Paternò [Footnote: Zeits. phys. Chem., 1890, iv. 457.] was the first to determine the molecular weight of tannin, employing Raoult's method; he found that tannin in aqueous solution behaves like a colloid and that hence Raoult's method is not applicable.
When, on the other hand, he dissolved tannin in acetic acid, results concordant with the formula of C_14H_10O_9, corresponding to a molecular weight of 322, were obtained. Sabanajew [Footnote: Ibid., 1890, v. 192.] later determined the molecular weight of tannin in aqueous solution as 1104, in acetic acid solution as 1113-1322, Krafft [Footnote: Ber., 1899, 32, 1613.] as 1587-1626 in aqueous solution.
Walden [Footnote: Ibid., 1898, 3167.] determined the molecular weight of tannin-schuchardt as 1350-1560, tannin-merck as 753-763, digallic acid as 307-316 (calculated 322). Feist [Footnote: Chem. Ztg., 1908, 918.] determined the molecular weight of tannin as 615 and one of his own preparation as 746, Turkish tannin as 521 and Chinese tannin as 899. In this connection it should be noted that the calculated molecular weight of pentagalloyl glucose, which in E.
Fischer's opinion forms a substantial part of the tannin molecule, is 940, but Fischer also thinks that this compound possesses a much higher molecular weight.
STRUCTURE OF TANNIN--The oldest structural formula of tannin is Schiff's digallic acid formula:--[Footnote 1: Ber., 1871, 4, 231.]
---------CO.O.----------
^ ^ OH
| | | |
## HO | | OH HOOC | | OH
V V
OH
A drawback to the acceptance of this formula is the absence of an asymmetrical C-atom; the formula, therefore, does not explain the optical activity exhibited by tannin. Schiff attempted to overcome this difficulty by adopting a diagonal structural formula, but even when adopting Clauss' diagonal formula for benzene the optical activity of a number of other compounds depends upon the existence of the asymmetrical C-atom. Biginelli [Footnote 2: Gazz chim.
Ital., 1909, 39, 268.] also opposed the digallic acid formula, and supported his view by referring to the arsenic compounds obtained by him on heating arsenic acid and gallic acid, instead of obtaining digallic acid. Walden, [Footnote 3: Ber., 1898, 31, 3168.] on the other hand, found, on analysing the digallic acid thus prepared, only slight traces of arsenic and, by the elementary analysis, obtained figures closely corresponding to those of digallic acid.
Bottinger [Footnote 4: Ibid., 1884, 17, 1476.] prepared the so-called [Greek: b]-digallic acid by heating ethyl gallate with pyroracemic acid and sulphuric acid and proposed the so-called ketone-tannin formula:--
HO_____OH ______OH
HO{_____}--------CO--------{______}OH
COOH OH
Schiff completed this formula by a diagonal, so as to explain the optical activity observed--
HO OH ______OH
HO{_____}--------CO--------{______}OH
COOH OH
[Diagonal bond between HO and COOH on left.]
The ketone formula was corroborated by Nierenstein, [Footnote: Ber. 1905, 38, 3641.] who distilled tannin with zinc dust and obtained diphenylmethane (smell of benzene) and a crystalline product, M.P. 7O°-71° C. (M.P. of diphenyl = 71° C.). König and Kostanecki [Footnote: Ibid., 1906, 39, 4027.] sought to find the constitution of the tannins in the leuco-compounds of the oxyketones, to which catechin belongs.
Nierenstein (see above), however, emphasises that the high molecular weight and the optical activity speak against the digallic acid formula, but in favour of this are the following points: (1) the decomposition of tannin with the formation of gallic acid; (2) the decomposition of methylotannin with the formation of di- and trimethyl esters of gallic acid; and (3) the production of diphenylmethane on distillation with zinc dust. The latter reaction especially illustrates the analogous formation of fluorene from compounds of the type--
--CO.O
^ ______ ^
| | | |
| | | |
## V V
Nierenstein gave the name "Tannophor" to the mother-substance of tannin, phenylbenzoate, C_6H_5-COO-C_6H_5.
Dekker [Footnote: "De Looistoffen," vol. ii, p. 30 (1908).] was, however, unable to detect diphenylmethane on distilling with zinc dust, and did, therefore, not accept Nierenstein's views. In proposing the formula--
O
||
## HO ^ _ __C
| | |
## | | }O
## | | | __OH
## | |____|C/ \OH
## HO V \__/
## OH OH OH
Dekker [Footnote: Ber., 1906, 34, 2497.] was enabled to account for most of the details in the behaviour of tannin, viz.: (1) the empirical constitution, C_14H_10O_9; (2) the almost complete hydrolysis into gallic acid (the dotted line indicates the decomposition of the molecule into 2 molecules gallic acid by taking up water); (3) the formation of diphenylmethane as a result of distillation with zinc dust; and (4) the electrical non-conductivity. Since tannin on acetylating yields a considerable amount of triacetylgallic acid, it should, according to Dekker, contain at least six acetylisable hydroxyls.
Nierenstein [Footnote: Chem. Ztg., 1906, 31, 880.] objected to this formula on account of its containing seven hydroxyl groups, whereas Dekker found six, Nierenstein five, and Herzig still fewer hydroxyl groups. The formula would also favour the conception of tinctorial properties which could hardly be ascribed to tannin. Lloyd [Footnote: Chemical News, 1908, 97, 133.] proposed a very intricate formula containing three digallic acid groups joined into one six-ring system, which would then explain the optical activity; it would, on the other hand, also require an inactive cis-form.
Iljin [Footnote: Jour. of the Russian phys. chem. Soc., 1908, 39, 470.] prepared two phenylhydrazine derivatives of tannin (C_74 H_58 N_8 O_30 and C_98 H_82 N_14 O_96) and proposed the formula, C_58 H_40 O_33, the constitution of which would be--
R_1 R_1
| |
}C--O--O--C{
| | |
R_2 | R_2
O
R_1 | R_1
| | |
}C--O--O--C{
| |
R_2 R_2
where R1= CO C_6 H_2 (OH)_3
and R2= C_6 H_2 (OH)_2
Nierenstein [Footnote: Ber., 1905, 38, 3841; 1907, 40, 917; 1908, 41, 77 and 3015; 1909, 42, 1122 and 3552; Chem. Ztg., 1907, 31, 72; 1909, 34, 15.] considers tannin to be a mixture of digallic acid and leucotannin, the latter possessing the formula--
^-------CH.OH--O----^ OH
| | | |
HO V OH HOOC V OH
OH
The optical activity of tannin is expressed in this formula and its probability is corroborated by Nierenstein, who was able to resolve the acetylated tannin by fractional precipitation into pentacetyl tannin (M.P. 203°-208° C.) and pentacetyl leucotannin (M.P. 166° C.). By oxidation, the former is converted into ellagic acid, and on hydrolysis with dilute sulphuric acid readily yielded gallic acid. Hydrolysis of the pentacetyl leucotannin, however, yielded gallic aldehyde, and oxidation yielded purpurotannin (a naphthalene derivative) in addition to ellagic acid.
Nierenstein [Footnote: Ber., 1910, 43, 628.] also succeeded in converting tannin into carboethoxytannin, the latter on saponification yielding crystalline, inactive digallic acid. On acetylating pentacetyl leucotannin with acetyl chloride a hexacetyl derivative (M.P. 159° C.) is obtained, the strychnine salt of which is resolved into both of the active components. This proves the presence of digallic acid and leucotannin in tannin lev. pur. Schering investigated by Nierenstein.
The latter author [Footnote: Liebig's Ann., 1912, 386, 318; 388, 223.] later considered tannin to be polydigalloylleucodigallic acid anhydride and the simplest tannin to be a digalloylleucodigallic acid anhydride. This view, however, would not stand subsequent criticisms, being in disagreement with the earlier observations of molecular weight and acidic properties of tannin. Manning [Footnote: Ibid., 1912, 34, 918.] believed to have isolated a pentethylester of the pentagalloyl glucoside from tannin, but this was shown to be the ethyl ester of gallic acid.
Feist [Footnote: Ber., 1912, 45, 1493.] had arrived at the conclusion that tannin was a glucose compound, and maintained that tannin from Turkish galls was a compound of glucogallic acid combined as an ester with 2 molecules gallic acid. But Fischer and Strauss [Footnote: Ibid., 1912, 45, 3773.] synthetically prepared a glucoside of gallic acid exhibiting differences from Feist's preparation which were so great that the latter no longer could be considered a single glucoside of gallic acid.
Fischer and Freudenberg [Footnote: Ibid., 1912, 45, 2717; 1913, 46, 1127.] subsequently elaborated a method of purifying tannin, and on investigating the purified substance, arrived at the conclusion that no other hydroxybenzoic acid than gallic acid was present in tannin. On repeating Strecker's hydrolysis they obtained 7-8 per cent, sugar, and hence concluded that 1 molecule of glucose was combined with about 10 molecules of gallic acid.
Owing to the difficulty of isolating the intermediary hydrolysis products, and the subsequent impossibility of drawing any conclusions as to the constitution of tannin, the latter investigators decided to adopt the methods offered by synthesis. Their basic idea was the absence of carboxylic groups in tannin, and that hence the total gallic acid must be present in ester form.
These conditions are fulfilled if one views tannin as being an ester compound of 1 molecule of glucose and 5 molecules of digallic acid, of similar construction as, for example, pentacetyl glucose.
Fischer and Freudenberg succeeded in preparing the former by shaking a mixture of finely powdered glucose, chloroform, and quinoline with an excess of tricarbomethoxygalloyl chloride for twenty-four hours and precipitating the resulting product with methyl alcohol; suitably purified, a light amorphous colourless substance was obtained which proved to be penta-(tricarbomethoxygalloyl) glucose.
Careful saponification with excess alkali in acetone-aqueous solution at room temperature yielded a tannin very closely resembling tannin, identified as pentagalloyl glucose. It is doubtful, however, whether this substance is homogeneous, and it is probably a mixture of two stereoisomers.
Fischer and Freudenberg, therefore, further concluded that tannin is mainly an ester compound of glucose and 5 molecules m-digallic acid. Elucidation on this point offered itself advantageously in Herzwig's methylotannin, [Footnote: Ber., 1905, 38, 989.] which is obtained by the interaction of diazomethane and tannin. The first step was then to prepare pentamethyl-m-digallic acid
CH_3.O_______ ______COOH
CH_3.O{_______}--CO.O--{______}
CH_3.O CH_3.O O.CH_3
from trimethylgalloyl chloride and the m-p-dimethyl ether of gallic acid; the chloride of this substance, coupled with [Greek: a]- and [Greek: b]-glucose, yields--
_CH.OR
| |
| CH.OR H_______O.CH_3
| | R=CO{_______}O.CH_3
O{ CH.OR H O
| | H_____O.CH_3
| CH CO{_____}O.CH_3
| | H O.CH_3
|_CH.OR
CH_2.OR
[Illustration: Penta-(pentamethyl-m-digalloyl)-glucose.]
The [Greek: a]- and [Greek: b]-derivatives thus obtained differ in their behaviour towards polarised light, and are, again, probably mixtures of two stereoisomers, i.e., mixtures of derivatives of [Greek: a]- and [Greek: b]-glucose.
Compared to methylotannin, these preparations exhibit very close resemblance to the former, from which it may be concluded that they are closely related to this substance, and probably possess the same or a very similar structure; the result of the above experiments has, therefore, brought us at least in close proximity to the structure of tannin.
It must, however, be borne in mind that the analysis and hydrolysis of tannin does not afford an explanation of the question as to whether tannin is a compound of glucose and 10, 9, or 11 molecules of gallic acid; it is also possible, though not probable, that tannin would contain a polysaccharide instead of glucose itself. Similarly to sugar, the true glucosides can be coupled with hydroxybenzoic acids, which is proved by the preparation of tetra-galloyl-[Greek: a]-methyl glucoside; this substance, also, exhibits tannoid character.
2. DIGALLIC ACID
Whereas, until recently, tannin had been considered to be gallic acid anhydride, or digallic acid, closer investigations have revealed that neither is tannin digallic acid nor is the synthetically prepared digallic acid identical with tannin. Schiff [Footnote: Ber., 1871, 231 and 967.] prepared digallic acid by the interaction of phosphorus oxychloride and gallic acid, and believed the product obtained to be identical with tannin; to this latter he first ascribed an ether formula (I.), later an ester formula (II.)--
(OH)_2 (OH)_2
¦¦ ¦¦
## C_6H_2---0---C_6H_2
¦ ¦
## COOH COOH
(I.)
(OH)_2
¦¦
## C_6H_2(OH)_3--C--O.C_6H_2
¦¦ ¦
## O COOH
(II.)
Froda [Footnote: Gasz. chim., 1878, 9.] held that Schiff's condensation product contained phosphorus or arsenic acid and ascribed its tanning properties to the latter; according to this investigator, digallic acid, when completely freed from arsenic acid, does not react with gelatine or quinine. Biginelli [Footnote: Ibid., 1909, 39, ii. 268 and 283.] did not consider the action of arsenic acid that of a catalyst, but held that it entered into reaction; according to his investigations products containing arsenic (C_7H_7O_8As and C_14H_11O_12As) are obtained when gallic acid is heated with arsenic acid.
In his preparation of digallic acid, Iljin [Footnote: Jour. f. prakt. Chem., 1911, 82, 451.] could only obtain gallic acid, and the ethyl ether of gallic acid showing no characteristics of the tannins; when, however, he heated gallic acid with arsenic pentoxide, he obtained bodies exhibiting the reactions given by tannins.
Bottinger [Foonote: Ber., 1884, 1503.] made the first attempt at synthesising tannin; he heated gallic acid or its ethyl ester with glyoxylic acid or pyroracemic acid, and obtained a substance of the composition C_14H_10O_9.2H_2O, which certainly showed some of the characteristics exhibited by tannin, but which by no means was identical with the latter. Bottinger's preparation is probably identical with [Greek: b]-digallic acid, one of two dibasic isomers having the composition--
C_6H_2(OH)_2COOH
|
C_6H(OH)_3COOH
the other possible isomer having the composition
C_6H(OH)_3COOH
CO |
C_6H_2(OH)_3
Fischer [Footnote: Ber., 1908, 41, 2875.] obtained a digallic acid (M.P. 275°-280° C) by coupling tricarbomethoxygalloyl chloride with dicarbomethoxygallic acid.
Nierenstein [Footnote: Ibid., 1910, 43, 628.] obtained, from the carbethoxy compound of tannin, a crystalline, optically active digallic acid, M.P. 268°-270° C. The pentacetate of this substance, obtained by reduction and acetylisation, yielded hexacetylleucotannin. A pentamethyldigallic acid methyl ester of the composition
((O.CH_3)_3)C_6H_2----COO-----C_6H_2((OCH_3)_2)COO.CH_3
was obtained by Mauthner [Footnote: Jour. f. prakt. Chem., 1911, 84, 140.] from the chloride of trimethylgallic acid and the methyl ester of the acid from the glucoside of syringin; on saponification with caustic potash the former compound yielded trimethylgallic acid and syringic acid.
Fischer [Footnote: Ber., 1913, 46, 1116.] synthesised the so-called m-digallic acid by coupling tricarbomethoxygalloyl chloride with carbonylgallic acid and subsequent splitting off of CO_2. The m-digallic acid appears as rather thick, colourless, microscopic needles containing about 16 per cent. water of crystallisation, M.P. 271° C. They are slightly soluble in cold, soluble in hot water, and very soluble in methyl and ethyl alcohols. Their aqueous solution gives dark blue coloration with ferric chloride, and precipitates gelatine and quinine.
Fischer and his students [Footnote 5: Ibid., 1912, 45, 915, 2709; 1913, 46, 1116.] prepared quite a number of digallic acid derivatives, amongst which are the following:--
Pentamethyl-m-digallic acid methyl ester, C_20H_22O_9.
Pentacetyl-m-digallic acid, C_24H_20O_14.
Pentamethyl-m-digallic acid, C_19H_20O_9.
Pentamethyl-m-digalloyl chloride, C_19H_19O_8Cl.
Pentamethyl-p-digallic acid, C_19H_20O_9.
Pentamethyl-p-digallic acid methyl ester, C_20H_22O_9.
Hydrolysis of digallic acid yields gallic acid; oxidation, on the other hand, ellagic acid and luteic acid (Luteo Säure), which can be separated by shaking with pyridine. The reduction of digallic acid yields, by different methods, the same reduction compound, [Footnote: Nierenstein, Abderhalden's "Handb. d. biochem. Arbeitsm.," vi. 154.] viz., the racemic leucodigallic acid, which differs from digallic acid by being devoid of any tannoid properties; the latter distinction may be ascribed to the transformation of the tannophor group--CO.O--, to the tannoid-inactive group CH(OH)--O--.
The successful resolving of racemic leucodigallic acid into both of its optically active components can only be brought about through the d- or l-hexacarbethoxyleucodigallic acid on introducing the latter into a 1 per cent. pyridine solution and heating to 45°-50° C., whereby the d- or l-acid is formed accompanied by a strong evolution of carbon dioxide.
Hydrolysis of leucogallic acid yields gallic acid and gallic aldehyde; oxidation by means of hydrogen peroxide yields ellagic acid and luteic acid, and oxidation with potassium persulphate and sulphuric acid, in acetic acid solution, yields purpurotannin (see below) [Footnote:
Liebig's Ann., 1912, 386, 318.].
Another distinct difference between digallic acid and leucodigallic acid is the fact that the formaldehyde condensation product of the former resembles gallic acid, whereas that of the latter resembles tannin; it is therefore probable that the leucodigallic acid part of the tannin molecule imparts this characteristic property to tannin.
---CO.O---
^ ^
| | | |
HO V OH COOH V OH
OH OH
[Illustration: Digallic Acid becomes...]
---CO.O---
^ ^ OH
| | | |
HO V OH COOH V OH
OH OH
[Illustration: Luteic Acid becomes...]
---CO.O---
^ ^ OH
| | | |
HO V --O.CO-- V OH
OH OH
[Illustration: Ellagic Acid becomes...]
COOH COOH
^ _______ ^
| | | |
HO V ---O--- V OH
OH OH
[Illustration: Purpuro Tannin.]
- Ellagic Acid
Ellagic acid was discovered in 1831 by Braconnot, who named it "acide ellagique." Its presence in the vegetable kingdom was not quite comprehended for some time, and Nierenstein [Footnote: Chem. Ztg., 1909, 87.] was the first to prepare this substance from algarobilla, dividivi, oak bark, pomegranate, myrabolarms, and valonea. The acid is obtained by precipitating it with water from a hot alcoholic extraction of the plants referred to, and recrystallising the precipitate from hot alcohol.
Another method of preparation consists in boiling the disintegrated plants with dilute hydrochloric acid, washing the residue, and extracting with hot alcohol, from which the acid will then crystallise. According to Lowe, [Footnote: Zeits. f. analyt. Chem., 1875, 35.] it may be obtained from dividivi, an aqueous extract of which is heated to 110° C. in a tube closed at both ends, when crystalline ellagic acid is deposited. Heinemann [Footnote: Ger. Pat., 137,033 and 137,934.] obtained ellagic acid by simply boiling repeatedly aqueous tannin solutions.
Lowe [Footnote: Jour. f. prakt. Chem., 1868, 103, 464.] first synthesised ellagic acid by heating gallic acid with arsenic acid or silver oxide. Herzig [Footnote: Monatshefte fur Chemie, 1908, 29, 263.] states that ellagic acid is deposited when air is conducted through a mixture of the ethyl or methyl ester of gallic acid and ammonia. Perkin [Footnote: Proc. Chem. Soc., 1905, 21, 212.] obtained a substance very similar to ellagic acid by electrolysis of gallic acid in sulphuric acid solution; on oxidising gallic acid in concentrated sulphuric acid solution, Perkin and Nierenstein [Footnote: Ibid., 1905, 21, 185.] obtained flavellagic acid.
Ellagic acid is also obtained by heating luteic acid in a 10 per cent. soda solution.
Ellagic acid thus prepared crystallises with 2 molecules of water as yellow micro-crystalline rhombic prisms or prismatic needles. The crystals lose this water when heated to 100° C., and it is possible that it is water of constitution, in which case the substance would be hexoxydiphenylcarboxylic acid, and the substance left after drying at 100° C., the dilactone.[Footnote: Arch. d. Pharm., 1907, 244, 575.]
Ellagic acid is slightly soluble in water, alcohol, and ether, but is easily soluble in caustic potash. With concentrated nitric acid the product assumes a red colour, which appears to be due to the presence of impurities; ellagic acid is commercially known as "alizarin yellow."
The constitution of ellagic acid was uncertain for a long time, and different structural formulae were proposed which more or less corresponded to its properties. The most satisfactory structural formula was proposed by Graebe--[Footnote: Chem. Ztg., 1903, 129.]
---CO.O---
^ -------- ^ OH
| | | |
## HO V --O.CO-- V OH
OH
This would represent a tetroxydiphenylmethylolide.
The probability of the correctness of this formula is supported by the possibility of the following derivatives: monomethylellagic acid, C'14H'6O'7(O.CH'3); dimethylellagic acid, C'14H'4O'6(O.CH'3)'2; tetramethylellagic acid, C'14H'2O'4(O.CH'3)'4; phenylhydrazinellagic acid, C'14H'6O'8.N'2H'3C'6H'5.
By the electrolytic reduction of ellagic acid, hexoxydiphenyl, (OH)'3C'6H'2-C'6H'2(OH)'3, is obtained; the ordinary methods of reduction yield leucoellagic acid, C'14H'10O'8, which crystallises in small sharp needles, melting with decomposition at 294°-295° C. Leucoellagic acid is soluble in ethyl and methyl alcohols, and in glacial acetic acid, insoluble in chloroform, benzene, toluene, carbon tetrachloride, and petrol ether; it gives a bluish-green colour with ferric chloride which quickly turns black.
Leucoellagic acid is soluble in alkalies, the solution assuming a deep-red coloration; it reduces silver nitrate in the cold, but is not adsorbed by mordanted cotton cloth, in which respect it differs from ellagic acid.[Footnote: Liebig's Ann., 1912, 394, 249.
ELLAGITANNIC ACID, C'26H'28'O'10-3H'2O, is closely related to ellagic acid; the former consists of faintly yellow needles, M.P. 329°-336°C.
It is soluble in water, precipitates gelatine, and is adsorbed by hide powder. It occurs with gallic acid, tannin, and ellagic acid in dividivi, myrabolams, algarobilla, and chestnut wood extracts.
Other bodies of this class include:--
METELLAGIC ACID, Cl_4H_6O_5, derived from methoxybenzoic acid, and recrystallised from acetic acid, forms small crystalline needles, M.P. 273°-276° C., and yields fluorene on distillation with zinc dust.
----CO.O----
^ ---------- ^
| | | |
## V ---O.CO--- V
## OH
FLAVELLAGIC ACID, C_14H_6O_9, is obtained by the oxidation of gallic acid with concentrated sulphuric acid and potassium persulphate. It crystallises from pyridine in prismatic needles melting above 360° C. Distillation with zinc dust yields fluorene (see above)--
----CO.O----
^ ---------- ^ OH
| | | |
## HO V ---O.CO--- V OH
OH OH
By heating ellagic acid for three-quarters of an hour at 185° C. with concentrated sulphuric acid, ceruleo-ellagic acid (dioxyellagic acid), C_14H_6O_10, is formed as yellowish needles, M.P. 360° C., which are but little soluble in the usual solvents. The acid is slightly soluble in strong caustic soda solution, the colour of the solution, on diluting, changing to green and blue.
LUTEIC ACID (Luteo Saure, pentoxybiphenylmethylolide carboxylic acid),C_14H_8O_9, occurs, in addition to ellagic acid, in myrabolams-- [Footnote: Ber., 1909, 42, 353.]
----CO.O----
^ ---------- ^ OH
| | | |
## HO V OH HOOC V OH
## OH OH
It is obtained by extracting myrabolams for one hour and a half, under reflux condenser, with pyridine, filtering and adding twice the volume of water to the filtrate and boiling till complete solution is obtained. After about thirty hours a reddish powder deposits, from which ellagic acid may be extracted with pyridine; the mother-liquor on being concentrated yields luteic acid. It is also obtained by oxidising tannin with hydrogen peroxide, the other oxidation product being ellagic acid, and the two may then be separated as indicated above.
Luteic acid forms reddish needles which are decomposed, with evolution of gas, at 338°-341° C. Heated with 10 per cent. caustic soda solution it yields ellagic acid. In pyridine solution the carboxyl group maybe eliminated by hydrogen iodide, whereby pentoxybiphenylmethylolide is formed as long silky needles, which do not melt below 300° C. The same substance may also be obtained when ellagic acid is boiled with concentrated caustic potash solution.
When luteic acid is treated with diazomethane, it yields the methyl ester of pentamethoxybiphenylmethylolidcarboxylic acid.
4. DEPSIDES
The most common decomposition products of the natural tannoids are hydroxybenzoic acids, notably gallic and proto-catechuic acids; furthermore, other aromatic and aliphatic hydroxy compounds frequently occur. So far, however, attempts at explaining the constitution of the complex decomposition products obtained by hydrolysing high molecular tannoids have not been successful.
On the other hand, the constitution of the simpler natural tannoids is known to a greater or less extent; of these, lecanoric acid (Lecanorsäure) is the best known, being an ester anhydride of orsellic acid (a dihydroxytoluylic acid). It combines with erythrite, forming another tannoid, erythrine.
The fact that hydroxybenzoic acids are constantly encountered together with the products obtained on hydrolysis of the tannins, seems to point toward the conclusion that anhydrides of hydroxybenzoic acids are frequent constituents of the natural tannoid molecules.
The assumption that, for instance, in tannin at least part of the gallic acid radicals are combined with one another is highly probable, and is supported by the formation of tri- and dimethylgallic acid from methylotannin, [Footnote: Herzig, Monatshefte f. Chemie, 1909, 30, 343.] and by the formation of ellagic acid when tannin is oxidised. [Footnote: Nierenstein, Ber., 1908, 41, 3015.] Further proof is brought forward by the existence of the pentacetyl-tannin, [Footnote:
Schiff, Ann. d. Chem., 1873, 170, 73.] and by the results of hydrolysis which has yielded up to 104 per cent. anhydrous gallic acid fiom tannin [Footnote: Sisley, Bull. Soc. Chim. 1909, 5, 727.]
Of the three classes of isomeric anhydrides which can be formed from hydroxybenzoic acids, the chemistry of the natural tannins is only concerned with the class comprising the ester anhydrides. If the carboxyl of the first molecule combines with a hydroxyl of the second molecule (ester formation), then a substance possessing character similar to that of a hydroxybenzoic acid is formed, which is capable of combining up with a further molecule in the same way.
It is natural to assume that this ester form is much more prevalent in Nature than a combination of two carboxyls by the elimination of water. From the point of view of the chemistry of the tannins, therefore, the starting-point would naturally be that of synthesising the ester anhydrides of hydroxybenzoic acids. Amongst the small number of synthetically prepared ester anhydrides of hydroxybenzoic acids, a few occur exhibiting the properties of the natural tannoids.
In order to simplify the terminology of these substances, Fischer [Footnote: Liebig's Ann., 1910, 372, 35.] proposed the name "Depsides" from [Greek: depheiv] = to tan. In analogy with peptides and saccharides, the names di-, tri-, and polydepsides of hydroxybenzoic acids would be suitable for these substances.
The principles underlying the synthesis of depsides are the following:--If the chlorides of carbomethoxy (or carbethoxy) hydroxybenzoic acids are coupled with the sodium salts of hydroxybenzoic acids, esters are formed, e.g.,
CH_3CO O.O.C_6H_4.CO.Cl + NaO.C_6H_4.COO.Na = NaCl
## + CH_3.COO.O.C_6H_4.CO.O.C_6H_4.COO.Na
On gently saponifying the esters, these are converted into the corresponding hydroxy derivatives--
OH.C_6H_4.CO.O.C_6H_4.COOH
According to Fischer and Freudenberg, [Footnote: Liebig's Ann., 1909, 372, 32.] this method possesses the following advantages:--
- The synthesis takes place at low temperatures, so that any
intramolecular rearrangements are improbable.
- The composition of the substances is controlled by the intermediary
compounds, the carboalkyloxy derivatives.
- The synthesis permits of more definite evidence as regards the
structure of the resulting compounds.
- The substances obtained are easily purified.
Depsides produced in this manner are by no means new, and were obtained by Klepl by simply heating p-hydroxy-benzoic acid (cf. Introduction, p. 4). This simple procedure, however, is not applicable to most other hydroxybenzoic acids which are decomposed at the high temperature necessary to induce reaction. Lowe and Schiff (loc. cit.) have obtained products similar to tannins, the latter investigator by removing the elements of water from gallic acid, protocatechuic acid, salicylic acid, m-hydroxybenzoic acid, cresotinic acid, phloretinic acid, and pyrogallolcarboxylic acid.
These depsides, however, are amorphous substances, and it is hence difficult to substantiate their homogeneity.
Carbomethoxylation of Hydroxybenzoic Acids
Amongst other compounds chlorphydroxybenzoic acid is used in the preparation of the materials employed in the synthesis of depsides; the free phenolic group, however, exerts a disturbing influence when aromatic acids are acted upon by phosphorus chloride, and another group, which can subsequently be easily removed, must therefore be introduced to cover the disturbing influence referred to.
For this purpose, Fischer [Footnote: Ber., 1908, 41, 2860.] chose the carbomethoxy group, and this investigator succeeded, by the action of chlorocarbonic alkyl ester and alkali upon hydroxybenzoic acid in cold aqueous solution, in obtaining substances with the properties required. [Footnote: Ber., 1908, 41, 2875.] In such substances (e.g., salicylic acid) where the hydroxyl occupies the ortho-position to the carboxyl, complete carbomethoxylation does not take place, whereas the m- or p- positions offer no hindrance.
In the case of the o-position, however, the action of chlorocarbonic alkyl ester is successfully assisted by the presence of dimethylaniline in an inert solvent, e.g., benzene.[Footnote: U.S. Pat, 1,639,174, 12, xii., 1899.] The difficulty encountered by the o-position is eliminated when the carboxyl is not directly linked to the benzene nucleus, e.g., o-cumaric acid.
Many hydroxybenzoic acids require an excess of chlorocarbonic methyl ester, which then also, to some extent, attacks the carboxyl group; but on dissolving the product in acetone and treating it with bicarbonate the carboxyl group as such is again restored without splitting off the carbomethoxy group.[Footnote: Ber., 1913, 46, 2400.] In this way all hydroxybenzoic acids may be carbomethoxylated.
[Footnote: Ibid., 1908, 41, 2877, 2881, 2882; 1909, 42, 226, 218, 223, 225; Liebig's Ann., 1912, 391, 357, 366; Ber., 1913, 46, 1145, 2390, 2400.] The carbomethoxy group is easily removed by excess of aqueous alkali in the cold, and is also partially removed when insufficient alkali is present; the latter fact is of importance in the synthesis of didepsides.
Chlorides of Carbomethoxyhydroxybenzoic Acids
The chlorides of these compounds are obtained when phosphorus pentachloride is allowed to act upon the acids, and are as a rule crystalline. For the purpose of synthesis they may be employed as follows:
- They readily form esters with alcohols, which on subsequent
saponification with alkali are converted into the esters of the free hydroxybenzoic acids.
- The chlorides interact energetically with esters of amino-acids, and
may be coupled with amino-acids in aqueous alkaline solution. On subsequently removing the carbo-methoxy group derivatives of hydroxybenzoic acids are obtained, e.g.,
CH_3.CO_2.O.C_6H_4.CO.Cl + 2NH_2CH_2.CO.C_2H_5
= NH_2.CH_2.CO_2.C_2H_5 + HCl + CH_3.CO_2.O.C_6H_4 CO.NH.CH_2CO_2C_2H_5.
## CH_3.CO_2.O.C_6H_4.CO.NH.CH_2.CO_2.C_2H_5 + 3NaOH
= Na_2CO_3 + C_2H_5OH + CH_3OH + HO.C_6H_4.CO.NH.CH_2.COONa.
- In the presence of AlCl_3 the chlorides easily combine with benzene,
and on removing the carbomethoxy group unsymmetrical hydroxy derivatives of benzophenone are formed:--
CH_3.CO_2.O.C_6H_4.CO.Cl + C_6H_6 = CH_3.CO_2.O.C_6H_4.CO.C_6H_5 + HCl
CH_3.CO_2.O.C_6H_4.CO.C_6H_5 + 3NaOH
= NaO.C_6H_4.CO.C_6H_5 + Na_3CO_3 + CH_3OH + H_2O
- The chlorides may be coupled with free hydroxybenzoic acids, and on
removing the carbomethoxy group didepsides are obtained. Repetition of these operations yields tri- and tetradepsides.
Preparation of Didepsides
A simple application of these syntheses is offered by p-hydroxybenzoic acid. When the chloride of its carbomethoxy derivative is allowed to interact with p-hydroxybenzoic acid in aqueous alkaline solution, in the cold, the alkali salt of carbomethoxy-p-hydroxybenzoic acid is formed:--[Footnote 1: Ber., 1909, 42, 216.]
CH_3.CO_2.O.C_6H_4.CO.Cl + NaO.C_6H_4.COONa
= CH_3.CO_2.O.C_6H_4.CO_2.C_6H_4.CO_2.Na + NaCl.
Being sparingly soluble, the salt in this case is readily deposited as crystals, but is readily converted into the free acid by hydrochloric acid. In most other cases, however, the alkali salts are easily soluble and the aqueous solution is then directly acidified with a mineral acid.
The chlorides, being for the most part solids, the mode of procedure is as follows:--the hydroxybenzoic acid required for coupling is dissolved in normal or double-normal alkali (the volume calculated per molecule acid), a little acetone added, and the mixture well cooled; a further molecule of 2N caustic soda and the chloride (I molecule) dissolved in dry acetone are added in small portions, whilst stirring, to the mixture.
In spite of the low temperature the coupling proceeds quickly and the sparingly soluble product can in most cases be precipitated from the solution by acidifying and diluting with water. In case of more easily soluble coupling products the acetone is driven off under reduced pressure or the liquid acidified and diluted, and the substance extracted with ether. Instead of alkali, dimethylaniline may be employed, with the exclusion of water as a solvent for the purpose of coupling.
Another suitable method of obtaining o-didepsides is that of treating o-hydroxybenzoic acids with phosphorus trichloride and dimethylaniline (e.g., synthesis of disalicylic acid, Boehringer & Sons).[Footnote:
Ger. Pat., 211,403.]
The carbomethoxy derivatives of the depsides are as a rule crystalline substances of distinct acidic character, and decompose alkaline carbonates.
The elimination of the carbomethoxy group may be brought about by dilute alkaline solutions in the cold, or by aqueous ammonia. If the depside formed is so stable as to resist the action of alkali for several hours, the use of the latter is very convenient for the purpose required. The substance is dissolved directly in sufficient normal alkali to neutralise the carboxyl group and a further 2 molecules of caustic soda for each carbomethoxy group to be eliminated are added. The temperature should be about 20° C., when the reaction as a rule is completed after one-half to three-quarters of an hour.
It is usual, however, to use an aqueous ammonia solution in considerable excess, whereby the temperature should again be about 20° C., and the solution of ammonia normal or half normal.
The didepsides so far investigated are crystalline bodies, sparingly soluble in cold water; they--as a rule--decompose when fused, possess acid reaction, and are dissolved by bicarbonates. On account of the presence of a free phenolic group they give a coloration with ferric chloride; if the phenolic group occupies the o-position to carboxyl, the coloration with ferric chloride is red or bluish-violet Excess of dilute alkali resolved all didepsides into their components at ordinary temperatures. The didepsides of gallic, proto-catechuic, gentisinic, and [Greek: b]-resorcylic acids precipitate gelatine and quinine acetate, and in this respect approach the natural tannins.
The following summary gives an account of depsides which have been prepared synthetically or which occur naturally:--[Footnote 1: Ber., 1908, 41, 2888; 1909, 42, 217; 1913, 45, 2718; 1913, 46, 1130, 2396, 1141, 1143; Liebig's Ann., 384, 230, 233, 238; 391, 356, 362.]
Di-p-hydroxybenzoic acid.
Di-m-hydroxybenzoic acid.
Disalicylic acid.
Diprotocatechuic acid.
Digentisinic acid.
Di-[Greek: b]-resorcylic acid.
p-Diorsellic acid.
o-Diorsellic acid.
m-Digallic acid.
Disyringic acid.
Di-o-cumaric acid.
Diferulic acid.
Di-[Greek: b]-hydroxynaphthoic acid.
p-Hydroxybenzoyl-m-hydroxybenzoic acid.
m-Hydroxybenzoyl-p-hydroxybenzoic acid.
Salicyl-p-hydroxybenzoic acid,
Vanilloyl-p-hydroxybenzoic acid.
Feruloyl-p-hydroxybenzoic acid.
[Greek: a]-Hydroxynaphthoyl-p-hydroxybenzoic acid.
Orsellinoyl-p-hydroxybenzoic acid.
Protocatechuyl-p-hydroxybenzoic acid.
Galloyl-p-hydroxybenzoic acid.
Pyrogallolcarboy p-hydroxybenzoic acid.
Syringoyl-p-hydroxybenzoic acid.
p-Hydroxybenzoyl-syringic acid.
Pentamethyl-m-digallic acid.
Pentamethyl-p-digallic acid.
Vanilloyl vanillin.
Preparation of Tridepsides
Monohydroxybenzoic acids allow theoretically of tri-depsides of the type HO.C_6H_4COO.C_6H_4.COO.C_6H_4.COOH only; if, on the other hand, di- or trihydroxybenzoic acids are dealt with, two formulae are possible, viz.:--
HO.C_6H_4.COO
} C_6H_3.COOH
HO.C_6H_4.COO
Of the former type, two compounds are known, i.e., di-p-hydroxybenzoyl-p-hydroxybenzoic acid and vanilloyl-p-hydroxybenzoyl-p-hydroxybenzoic acid--
HO
} C_6H_3.COO.C_6H_4.COO.C_6H_4.COOH
CH_3O
The first named of these two compounds was obtained by Klepl, in addition to the didepside, by heating p-hydroxybenzoic acid. Fischer and Freudenberg obtained a beautifully crystalline form in the following way: carbethoxyhydroxy-benzoyl chloride was coupled with p-hydroxybenzoyl-p-hydroxybenzoic acid in alkaline solution, the compound dissolved in a mixture of pyridine and acetone, and ammonia added for the purpose of removing the carbethoxy group. The tridepside was then obtained as long needles by re-dissolving in acetone.
Both tridepsides melt well above 200° C., are practically insoluble in water, and are but sparingly soluble in practically all organic solvents. In alcoholic solution they give colour reaction with ferric chloride similar to those given by p-hydroxybenzoic acids.
Preparation of Tetradepsides [Footnote: Fischer and Freudenberg, Liebig's Ann., 1910, 372, 32.]
Here, again, two forms are known, e.g., tri-p-hydroxybenzoyl-p-hydroxybenzoic acid--
HO.C_5H_4.COO.C_6H_4.COO.C_6H_4COO.C_6H_4 COOH
and vanilloyl-di-p-hydroxybenzoyl-p-hydroxybenzoic acid--
HO
} C_6H_3.COO.C_6H_4.COO.C_6H_4.COO.C_6H_4.COOH
CH_3O
The former has been prepared from carbethoxyhydroxy-benzoyl-p-hydroxybenzoyl chloride and p-hydroxybenzoyl-p-hydroxybenzoic acid in alkaline solution; the second tetradepside was prepared from carbomethoxyvanilloyl-p-hydroxybenzoyl chloride and p-hydroxybenzoyl-p-hydroxy-benzoic acid.
The preparation of these compounds is rendered difficult by the slight solubility of the substances and their slight affinities for entering into reaction. Both tetradepsides were obtained in crystalline form, and are but very little soluble in most organic solvents. They decompose on being fused.
Tannoid Substances of the Tannin Type
The preparation of pentagalloyl glucose has proved this compound to be nearly identical with tannin obtained from galls (tannin); a few other natural tannins belong to this type which Fischer terms acyl compounds of sugar with hydroxybenzoic acids. The method of preparation employed in the synthesis of pentagalloyl glucose may be easily applied to other hydroxybenzoic acids, e.g. penta[p-hydroxybenzoyl] glucose [Footnote: Fischer and Freudenberg, Ber., 1912, 45, 933.] was prepared in this way.
Similar characteristics are exhibited by pentasalicylo glucose. Mention must also be made of the corresponding derivative of pyruvic acid and the compound with pyrogallolcarboxylic acid, penta-[pyrogallolcarboyl]glucose. [Footnote: Fischer and Rapoport, Ber., 1913, 46, 2397.] The latter is isomeric with pentagalloyl glucose and possesses similar properties; there is, however, a vast difference in the solubility of the two.
Whereas the galloyl compound is easily soluble in cold water, its isomer is hardly soluble in hot, and completely insoluble in cold water. Considering the very similar structure of these two tannins, such differences appear surprising, but an analogy may be readily found in the existence of colloidal solutions of tannin and the (nearly) identical pentagalloyl glucose. These properties clearly show how dependent is the colloidal state on small differences in the structure of two substances.
On the other hand, the formation of hydrosols is of the greatest importance relatively to the part played by these substances in Nature as well as relating to their chemical characteristics; thus it is extremely difficult to make a solution of penta-[pyrogallolcarboyl]-glucose, at the same time ascertaining its astringent taste and its property of precipitating gelatine.
The experience gained by the methyl glucosides makes it exceedingly probable that the simpler polyhydric alcohols also are suitable substances to employ in these syntheses; as a matter of fact, glycerol has been condensed with gallic acid. [Footnote: Fischer and Freudenberg, _Ber., 1912, 45, 935.]
One of the chief characteristics of synthetic tannins is their high molecular weight; for instance, the molecular weight of penta-[tricarbomethoxygalloyl]-glucose is 1,810, that of penta-[pentamethyl-m-digalloyl]-glucose 2,051. Employing gallic acid derivatives, especially the tribenzoyl compounds, coupled with glucose, e.g., mannite, yielded a neutral ester of molecular weight 2,967.
The determination of the elementary composition of compounds of high molecular weight is greatly facilitated by employing their halogen derivatives; so, for instance, is p iodophenyl maltosazone very suitable. Coupling the latter with tribenzoylgalloyl chloride yielded hepta-[tribenzoyl-galloyl]-p-iodophenyl maltosazone, the structure of which is represented by--
CH:N_2H.C_6H_4I
|
C:N_2H.C_6H_4I
|
CH.O.R R = CO.C_6H_2(O.CO.C_6H_6)_2
|
CH.O.R
|
CH.O.R R R R R
| O O O O
| | | | |
CH_2.O.CH.CH.CH.CH.CH.CH_2
| |
## ---O---
The molecular weight of this substance is 4,021, and probably represents the highest molecular organic body obtained in any chemical synthesis.
From a physiological standpoint the recognition of tannins as esters of glucose and hydroxybenzoic acids, possessing characteristics similar to those of tannin, is of great importance. Especially interesting appears the fact of plants utilising sugars for the esterification of acids, just as glycerol or monohydric alcohols may be employed for the same purpose. Free acids, as a rule, are only tolerated in certain parts of the organism, the latter usually striving to neutralise acidic groups which may be brought about by salt formation; formation of amino compounds (proteins) or esterification (fats); and, lastly, esterformation by means of sugars.
Why Nature should always build up substances of very complex constitution can only be explained by biochemical investigations, but it may, at any rate, be assumed that by this means any substance poisonous to the living organism is rendered inactive.
The function of the tannins present in plants may thus be explained; if, for instance, phenols are formed by the oxidation of corresponding sugars, [Footnote: Mielke, "Ueber die Stellung der Gerbstoffe im Stoffwechsel der Pflanzen" (Hamburg, 1893).] the poisonous character of the former would be lessened by the introduction of the carbonic acid esters and subsequent coupling of the substances (depside formation).
The depsides thus formed would serve as vehicle of the sugars and transport the migrating tannins, [Footnote: Kraus, "Grundlinien zu einer Physiologie der Gerbstoffe" (1889).] and, after subsequent deposition of the sugars, would then be eliminated from the plant organism, either by oxidation into ellagic acid and phlobaphenes or by condensation with the formation of cork.
Diagrammatically, the following would represent the physiology of the tannins:--[Footnote: Nierenstein, "Chemie der Gerbstoffe" (Stuttgart, 1910).]
Sugar-->Phenol-->Hydroxybenzoic Acid-->Depside-->
|Phlobaphene
-->Migrating Depside-->Glucoside-->Free Depside-->-{Ellagic Acid
|Cork.
[Illustration: Chart Showing the Decomposition of Products of Tannin.]
SECTION II
SYNTHESIS OF TANNING MATTERS
1. AROMATIC SULPHONIC ACIDS
In organic chemistry distinction is made between sulphonic acids of the aliphatic and the aromatic series, the characteristic group of these acids being the so-called sulphonic acid group, HSO_3.
When sulphides or mercaptans in glacial acetic acid solution are heated with permanganate, the resulting sulphonic acid compounds exhibit great similarity to compounds containing free carboxyl groups. The sulphonic acid group may also be directly introduced either by concentrated, or by fuming sulphuric acid, or by elimination of halogen by the action of sodium or silver sulphite on the halogen derivatives of the aliphatic compounds. Saturated hydrocarbons do not react with sulphur trioxide, but unsaturated hydrocarbons are readily attacked by SO_3.
Similarly, halogenated compounds and alcohols react with concentrated or fuming sulphuric acid forming sulphonic and hydrosulphonic acids respectively.
The aromatic compounds form, as a rule, sulphonic acids with much greater facility. Benzene, for instance, is easily converted into the m-disulphonic acid by gently heating with fuming sulphuric acid; stronger heating converts the m- into the p-disulphonic acid, and at 190° C. the trisulphonic acid is formed. Toluene treated with fuming sulphuric acid first yields o- and p-sulphonic acids, finally o- and p-disulphonic acids, ethylbenzene at the boiling point p-ethylbenzene-sulphonic acid.
Of the three isomeric xylenes o- and m-xylene dissolve in concentrated, p-xylene in fuming sulphuric acid only.
The action of sulphuric acid on naphthalene is stronger even than on benzene. Equal parts of naphthalene and sulphuric acid heated to 100° C. yield 80 per cent. [Greek: a] and 20 per cent. [Greek: b]-monosulphonic acid. At 160°-170°C. 25 per cent [Greek: a]- and 75 per cent. [Greek: b]-sulphonic acid is formed, and at higher temperatures [Greek: b]-monosulphonic acid only. If, on the other hand, 8 parts of naphthalene are heated with 3 parts of concentrated sulphuric acid to 180° C., two different naphthyldisulphonic acids are obtained.
Complete solution of the substance in sulphuric acid is, generally speaking, a criterion of complete sulphonation. A completely sulphonated compound should remain clear on dilution with water, or, in case precipitation occurs, the precipitate should be completely soluble in alkali or ammonia. It is necessary to submit the product to this test, since many organic substances are soluble in concentrated sulphuric acid without undergoing any alteration in composition.
Phosphoruspentoxide or potassium sulphate considerably increase the sulphonating property exhibited by fuming sulphuric acid.
The separation of the sulphonic acids from sulphuric acid is effected by salting out the former with common salt, or by removing the sulphuric acid with calcium, barium, or lead salts, provided that the sulphonic acid salts of these metals are soluble in water.
The sulphonic acid, in its chemically pure state, is best obtained from its crystalline barium salts, which are decomposed with the equivalent of sulphuric acid; another way is to decompose the calcium salts of the sulphonic acids with oxalic acid. The sulphonic acids are frequently hygroscopic and are easily soluble in water; the majority of their barium and lead salts are also soluble in water. The sulphonic acids are insoluble in ether. The halogens do not easily react with sulphonic acids, but when they do they usually replace the sulphonic acid group. In order to prepare the halogen substitution products, therefore, use is made of sulphonic chlorides.
The latter are obtained by the action of chlorosulphonic acid on aromatic hydrocarbons; a simpler method, however, is to treat the dry alkali sulphonates with phosphorus pentachloride--
C_6H_5SO_3Na + PCl_5 = C_6H_5SO_2.Cl + NaCl + POCl_3
Derivatives of sulphonic chlorides are sulphonamides, which are easily prepared from the former by grinding with ammonium carbonate--
C_6H_5SO_2.Cl + (NH_4)_2CO_3 = C_6H_5.SO_2.NH_2 + NH_4Cl + CO_2 + H_2O
Sulphonic chlorides react with alkaline sulphides to form thiosulphonic acids--
C_6H_5SO_2.Cl + K_2S = C_6H_5SO_2.SK + KCl
Sulphonic chlorides, dissolved in ether, yield sulphinic acids on reduction with zinc dust or metallic sodium--
C_6H_5SO_2.Cl + H_2 = C_6H_5SO_2.H + HCl
In the sulphonic acid compounds it is assumed that the sulphur is hexavalent, and it is hence possible to consider the sulphones to be esters of sulphinic acid.
==O
R--S==O
--H
The sulphones are mostly solid bodies, which soften prior to melting when heated. They are very stable towards chemical reagents; for instance, saponification of a mono-sulphone very rarely yields sulphinic acid.
If a hydroxyl is substituted for a hydrogen atom in the aromatic hydrocarbons, the action of sulphuric acid is greatly facilitated; thus, by merely mixing phenol with sulphuric acid, the sulphonic acid is at once formed, whereby, in the cold, o-phenolsulphonic acid prevails which on heating for some time to 100°-110° C. is completely converted into p-phenolsulphonic acid. In the absence of free sulphuric acid the conversion of o- into p-phenolsulphonic acid is brought about by heating the aqueous solution.
Phenol-2,4-disulphonic acid is prepared from o- or p-phenolsulphonic acid, whereas phenol-2,4,6-trisulphonic acid is prepared directly from phenol by heating with concentrated sulphuric acid in presence of phosphorus pentoxide. Phenolsulphonic acids are also obtained by fusing benzenedisulphonic acid with alkali.
Cresol is not so easily sulphonated as is phenol; o-cresol when heated eight to ten hours at 90° C. with one and one-half times its weight of concentrated sulphuric acid, yields o-cresol-p-sulphonic acid.
The phenolsulphonic acids are strong, rather stable acids; their alcoholic hydroxyl-hydrogen atom may, similarly to that of the phenols, be substituted by a metal or an alkyl radical.
From [Greek: a]- and [Greek: b]-naphthol a number of sulphonic acids may easily be prepared; viz., mono-, di-, and trisulphonic acids. Nearly all these acids are important as basic materials in the dyestuff industry, especially 2,6-[Greek: b]-naphtholmonosulphonic acid (S-acid), 2,3,6-[Greek: b]-naphtholdisulphonic acid (R-acid) and 2,6,8-[Greek: b]-naphtholdisulphonic acid (G-acid).
- Condensation of Phenols
Phenolsulphonic acids exhibit pronounced tendencies to condensation, for which purpose A. v. Baeyer (1872) employed aldehydes. The reaction is rather violent, and yields, in addition to well-defined crystalline substances, amorphous bodies resembling rosins. In addition to formaldehyde, paraformaldehyde, trioxymethylene, methylal, hexamethylene-tetramine, and other substances containing a reactive methylene group, as well as acetaldehyde, benzaldehyde and other aldehydes may be employed to induce reaction.
A number of these condensation products are derivatives of diphenylamine or hydroxybenzyl alcohols. When the latter are heated, either by themselves or in presence of acids, anhydrides and polymerisation products are formed producing hard, brittle, fusible substances, insoluble in water but fairly soluble in organic solvents. The same substances are formed when phenols are condensed with formaldehyde, especially in the presence of acid contact substances and excess of phenol by sufficiently long heating at certain temperatures.
The substances referred to are termed "Novolak": similar to these are the so-called "Resols," insoluble and non-fusible substances, very resistant to chemical and physical action. Another member of the series is the so-called "Bakelite" or "Resitol," which does not fuse but softens when heated and swells in organic solvents.
The ultimate product of this class of substances is "Resit" which is obtained when concentrated hydrochloric acid is allowed to act upon a mixture of phenol and formaldehyde; the temperature rises spontaneously, and a hard, porous, insoluble mass of great resistance is obtained. By heating resols, resitols are formed which, on further heating, are finally converted into resits. [Footnote: Ber., 1892, 25, 3213.]
Of all these products, bakelite (resitol) has found the greatest industrial application; in its purest form, this substance is a nearly colourless or light yellow body of sp. gr. 1.25 and, being a poor conductor of heat and electricity, constitutes an excellent insulating material; it is exceedingly resistant towards most chemical reagents even in concentrated forms of the latter. Its pronounced refractivity, and the ease with which it may be worked, makes bakelite a favourite substitute for amber (Ger. Pat, 286, 568).
Similarly, the resols which can be easily moulded are used either as such or mixed with sand, pulverised cork, asbestos or wood, and the moulded substances then converted into the more highly resistant bakelite by heating.
The constitution of these bodies no doubt depends largely on their method of preparation; Baekeland [Footnote: Chem. Ztg., 1913, 73, 733.] considers resit a polymerised hydroxybenzylmethylene glycol anhydride; Raschig, a diphenylmethane derivative (e.g., dihydroxydiphenylmethane alcohol); Wohl [Footnote: Ber., 1912, 45, 2046.] considers them polymerisation products of methylene derivatives of tautomeric phenol.
CH===CH
H_2C:C{ }CO
CH===CH
[Note: Lower Right CH has double bond to CO]
This group possesses the characteristic property of being capable of converting animal hide into leather when suitably dissolved. The author has dissolved a number of these water-insoluble condensation products in alkali and alcohol and was able to demonstrate their tanning effects on pelt; bakelite is easily soluble in alkali; a faintly alkaline solution partially precipitates gelatine, and completely so when the alkali is neutralised. This latter solution gives a dirty brown precipitate with iron salts.
These condensation products gained extraordinary importance for the tanning trade when Stiasny [Footnote: Ger. Pat, 262,558; Austr. Pat, 58,405.] succeeded in preparing them in water-soluble form when they are enabled to directly exert their tannoid properties. This may be done by acting upon two molecules of concentrated phenolsulphonic acid with one molecule of formaldehyde, the temperature thereby not exceeding 35°C.
By condensation, however, considerable heat is liberated, and hence the rise in temperature can only be limited by adding the diluted formaldehyde drop by drop, whilst stirring and cooling, to the phenolsulphonic acid.
The original letters patent is worded as follows: 10 kilos each of crude phenol and sulphuric acid (66° Bé.) are heated with stirring for two hours at 105°-106°C., cooled to about 35°C., and 463 kilos 30 per cent. formaldehyde added during three hours, the temperature thereby not exceeding 35°C.; the stirring is continued for a couple of hours after the final addition of formaldehyde. This yields about 24 kilos of the crude condensation product. On a commercial scale, however, cresol (cresylic acid) is substituted for phenol.
There are three isomers of cresol, viz., o-, m-, and p-cresol, and it was naturally of interest to investigate whether one or the other of the isomers exerted any particular influence on the properties of the final product. It was found, however, that condensation products from the three isomers were distinguishable from one another neither in physical nor in tannoid properties. It is hence possible to employ crude cresol, which contains varying quantities of the o-, m-, and p-compounds, in the manufacture of these tanning matters.
[Footnote: Gen Pat, 291,457.]
The tar obtained from the Rochling coal-gas generator contains considerable quantities of phenols (B.P.=200°-250°C.), and the author has protected the use of these for the production of synthetic tannins by Ger. Pat, 262,558. A deep brown viscous mass is obtained which, when partly neutralised, yields similar results to those given by the product above referred to.
It may be anticipated that by analogy from the chemical reactions taking place in the condensation of phenols on the one hand and cresolsulphonic acid on the other, that all other homologues of phenol, its polyvalent derivatives, substitution products and acids, would yield similar condensation products.
The particular position occupied by the aromatic hydroxy compounds in the chemistry of substance possessing tannoid character is not only evidenced by the natural classification of the tannins, tannin derivatives, and decomposition products so far isolated and investigated, but also by other chemical behaviour shown by these substances.
Meunier and Seyewetz [Footnote:Collegium, 1908, 315, 195.], for example, were able to show that phenol, p-aminophenol, chlorophenol, trinitrophenol, catechol, resorcinol, hydroquinone, monochlorohydroquinone, orcinol, pyrogallol, and gallotannic acid precipitate gelatine from its aqueous solution, that is, to a certain extent possess tanning properties.
The author has extended this series somewhat and obtained the following results:--
Relative Behaviour Towards
Substances Gelatine. Hide Powder. Pelt.
Tribromophenol Slight ppte.
Tans Surface tannage
[Footnote: In alcoholic solution]
o-Nitrophenol No ppte. " "
Br-o-Nitrophenol Slight ppte. " "
Tribromopyrogallic Ppte. " "
acid
Bromophloroglucinol " " No tannage
Galloflavine Slight ppte. " "
Bromosalicylic acid " " "
Bromo-[Greek: b] " " Tans
-naphthol
[Footnote: In alcoholic solution]
Rosolic acid " " "
[Footnote: In alcoholic solution]
Gallic acid No ppte.
No tannage No tannage
By the condensation of their sulphonic acids, it may be demonstrated experimentally how the tannoid properties of nearly every member of the series are intensified. Investigattion in this direction, however, has not been systematically undertaken, for which reason the author determined to examine this subject; but the enormous number of samples required, obtainable only with great difficulty during the war, made it impossible to conclude completely the researches in this field. What little has so far been done relatively to this subject should, when collected, indicate the way to be pursued in this wide field of investigation.
What follows will hence comprise the conversion of a few of the most important members of this series of substances into their methylene-condensation products with a brief discussion of the qualitative and tannoid reactions of the latter.
The didepside of phenolsulphonic acid is obtained by condensing carbomethoxyphenolsulphonic chloride with sodium phenolsulphonate in the presence of the calculated amount of caustic soda. A product of the composition
CH_3.0.COO.C_6H_4SO_2.0.C_6H_4.SO_3Na
is first obtained, which on saponification with soda yields the pure didepside--
HO.C_6H_4.SO_2.C_6H_4.SO_3.Na
By acidifying the concentrated solution the didepside is obtained as a white crystalline substance; a solution of which precipitates gelatine without, however, exhibiting any tanning effect upon animal hide. If, on the other hand, the above ester is converted into the chloride
CH_3O.COO.C_4H_4SO_2.O.C_6H_4.SO_2Cl
by treatment with PCl_5, and the chloride thus obtained further condensed with sodium phenolsulphonate, saponified, and the solution acidified, the pure tridepside
HO.C_6H_4.SO_2.O.C_6H_4.SO_2.O.C_6H_4.SO_3Na
is precipitated as white crystalline needles which not only precipitate gelatine, but are capable of converting animal hide into leather.[Footnote: Chem. Ztg., 1919, 43, 318.]
Of the class of hydroxy-cymenes thymol,
C_6H_3.CH_3.C_3H_7OH,
was converted into the water-soluble sulphonic acid by warming with concentrated sulphuric acid at 50° C., the sulphonic acid being subsequently easily condensed with formaldehyde by slightly heating the mixture. The condensation product thus obtained is a viscous brown mass which is easily soluble in water, precipitates gelatine completely, gives a bluish-black coloration with iron salts, and gives a precipitate with aniline hydrochloride. To investigate its tannoid properties, the mixture was brought to the acidity 1 gm = 10 c.c.
N/10 NaOH and a piece of bated calf skin was then introduced into a solution measuring about 2° Bé. After eighteen hours the pelt was nearly tanned through, and a further twenty-four hours completed the tanning process, after which a light fat-liquor was given. The dried leather was brownish-grey in colour, possessed soft and full feel and good tensile strength.
On account of their importance, the three dihydroxybenzenes were examined with a view to test their suitability for conversion into tannoid substances.
o-Dihydroxybenzene, catechol, yields a sulphonic acid easily soluble in water, which on the careful addition of formaldehyde assumes a blue colour. The compound thus obtained may be heated to 100° C., without depositing insolubles. A further addition of formaldehyde, however, results in the formation of a considerable quantity of insolubles whilst the liquid assumes a brown coloration.
If, on the other hand, the sulphonic acid is diluted with twice its volume of water, formaldehyde added and the mixture heated on the water bath, the liquid immediately turns brown, the formaldehyde is completely fixed, and a condensation product soluble in water results. The latter gives a brownish-black coloration with ferric chloride, completely precipitates gelatine, but gives no opalescence with aniline hydrochloride. Tanning experiments with the partly neutralised (1 gm.= 10 c.c.
N/10 NaOH) substance resulted in both grain and flesh being tanned with a black colour, whereas the interior of the pelt was pickled (white colour). After a further forty-eight hours, however, the black colour penetrated the pelt, and tannage was complete. The washed and lightly fat-liquored leather was soft, of full feel and good tensile strength, and was greyish coloured throughout.
With regard to the black colour possessed by leathers tanned with synthetic tannins the following should be noted. When sulphonating and especially when condensing substances, black dyestuffs or very finely divided carbon in the colloidal state are often formed. Such a substance does not deposit the black particles, even when filtered through kaolin, and hence convert pelt into leather possessing black colour on the surface.
The hide in this case acts as a perfect filtration medium, whereby the surface layers retaining the coloured particles assume their colour; thus only the pure tanning matter enters into the interior, which then, according to the composition of the former, imparts a colour varying from white to light brown to the inner layers.
m-Dihydroxybenzene, resorcinol, is also easily sulphonated by concentrated sulphuric acid, the brownish-coloured sulphonic acid being easily soluble in water. If the sulphonic acid is diluted with three times its volume of water, cooled down, a few drops of formaldehyde added and the mixture heated on the water bath to completely fix the formaldehyde, and this process repeated till no more formaldehyde is taken up, a brown water-soluble condensation product results, the aqueous solution of which precipitates gelatine completely, aniline hydrochloride only partly and which gives a deep blue colour with ferric chloride.
A piece of calf skin immersed in a solution of the partly neutralised (as above) product was tanned through in twenty-four hours; when lightly fat-liquored, the resulting leather possessed a yellowish-green colour and good tensile strength, and was soft and full.
p-Dihydroxybenzene, hydroquinone, was converted into the water-soluble sulphonic acid by heating it with concentrated sulphuric acid at 100° C.; the sulphonic acid, mixed with formaldehyde at ordinary temperature, immediately solidifies to a white mass, which is soluble in water and which had completely fixed the formaldehyde. If, however, this mass is heated for some time to 100°C, it assumes a light brown coloration and its solubility in water is diminished. A slight excess of formaldehyde and the application of heat result in dark violet insoluble condensation products.
The aqueous solution precipitates gelatine, gives a deep blue colour with ferric chloride, but gives no precipitate with aniline hydrochloride; on the other hand, addition of potassium nitrite produces the yellow colour characteristic of hydroquinone.
The product effects a slower tannage (seven days) than the former product, when a brown, soft, but rather empty leather of good tensile strength is obtained.
Of the trihydroxybenzenes pyrogallol and phloroglucinol only were included in these investigations.
When pyrogallol is sulphonated with concentrated sulphuric acid a violet-coloured sulphonic acid, soluble in water, is obtained, which, when treated with formaldehyde first in the cold and then when heated, yields a solid deep red-coloured mass, which precipitates gelatine but not aniline hydrochloride, and gives a blackish-brown colour with ferric chloride. The partly neutralised substance in aqueous solution tans pelt in twenty-four hours with black colour on the surface only, the intermediary layer being pickled (white colour) only, but the black-coloured tanning matter ultimately penetrates the pelt, which tanned through in seven days.
The resultant leather is coloured black throughout, is full, soft, and possesses good tensile strength.
Sulphonation of phloroglucinol succeeds at higher temperatures only, the sulphonic acid being a solid which is scarcely soluble in water, the latter then assuming a wine-red colour. The condensation product--prepared as described for resorcinol, but requiring higher temperature--is a brick-red powder, insoluble in water.
The same end-product also seems to be obtained by simply heating the sulphonic acid at a higher temperature; this also induces condensation with the formation of a reddish-brown mass insoluble in water. It is, of course, impossible to attempt any tanning experiments with this product in aqueous solution; attempts at dissolving the condensation product in alcohol proved barren of result, since only traces of impurities accompanying the substance dissolved, imparting a light reddish-brown colour to the solution.
In highly concentrated alcohol, however, the condensation product is somewhat soluble, yielding a reddish-brown solution. A piece of pelt introduced into the alcoholic solution was surface tanned only after forty-eight hours, leaving the remainder of the pelt pickled; extending the experiment over a further four days produced no change in the pelt. The latter was therefore rinsed with water, lightly fat-liquored and dried, when a soft but empty leather of grey colour and good tensile strength was obtained.
It appears, therefore, to be a case of pseudo-tannage, where an infinitesimal amount of synthetic tannin produces a tanning effect without, however, a true tannage being effected.
The Elberfelder Farbenfabriken have protected the use of the condensation products of di- and polyhydroxybenzenes by Ger. Pat., 282,313; owing to the high cost of the latter substances, however, it is doubtful whether synthetic tannins prepared from these materials would not be too expensive for any other than pharmaceutical purposes.
Before leaving the phenols, mention must be made of the quinones, the use of which for tanning purposes was first protected by Ger. Pat., 206,957 (30th April 1907). According to this patent, only 400 gm. of quinone are required for the conversion into leather of 400 kilos pelt, drum tannage being preferable. During the process the leather first assumes a reddish colour, changing through violet to brown; its resistance to water, acids, and alkalies is said to be considerably greater than that exhibited by all other kinds of leather.
The chemistry of the quinone tannage has been investigated, and an explanation given by Thuau [Footnote: Collegium, 1909, 363, 211.] assumes a reaction between the quinone and the amino groups of the hide protein with the formation of hydroquinone--
+-O OH
| | |
## 2R.NH_2 + 2C_8H_4 | = C_6H_4 + C_6H_4(O.NH.R)_2
| | |
## +-O OH
(Pelt.) (Leather.)
Fahrion has shown that, during the tanning process, the quinone loses its active oxygen, and this can only be brought about by the amino group of the hide protein, the amino group only being capable of effecting reduction of the quinone. An analogy is here offered by dianilinoquinone. A spent quinone liquor contains considerable amounts of hydroquinone. The tannage may also be effected by exposing pelt saturated with hydroquinone to oxidation by the air.
The pelt, which is unaltered by the hydroquinone bath, on being removed from the latter, and in the presence of alkali, assumes a red colour at first, which changes into violet, blue, and finally brown, the pelt being thereby converted into a quinone-tanned leather.
It may be noted that quinone only effects pseudo-tannage; quinone mixed with water deposits, in time, a black amorphous substance practically insoluble in water. This substance is easily adsorbed by hide powder, but is not capable of converting the latter into that insoluble form into which it is converted by the natural tannins.
Amongst polyhydric alcohols, the behaviour of the methyl ester of catechol, guaiacol was investigated. The sulphonic acid was prepared by heating guaiacol with concentrated sulphuric acid, the resulting water-soluble product possessing a light, brownish-green colour. On condensing the sulphonic acid with formaldehyde, the same precautions were observed as in the case of resorcinol, but complete fixation of the formaldehyde could only be obtained by finally heating the product for a short time over a free flame, at about 105° C. Condensation was indicated by the brownish appearance of the liquid. No insoluble products were formed.
The condensation product easily dissolves in water, the solution assuming a rich brown colour and exhibiting the following reactions: gelatine is completely precipitated, aniline hydrochloride produces opalescence, and ferric chloride a deep brown coloration.
Tannage, with the partly neutralised product, was rapid, the pelt being nearly tanned through in twenty-four hours, excepting a small white streak in the middle; after a further twenty-four hours this streak had vanished, and the completely tanned, dark grey-coloured leather, after washing, fat-liquoring, and drying, was soft, full, and of good tensile strength, very similar to the leather yielded by the catechol-condensation product.
Of the nitro-compounds, trinitrophenol, C_6H_2(NO_2)_3OH (picric acid), was investigated. If a concentrated solution of picric acid is brought into contact with pelt it will penetrate the latter completely in a few days; it is, however, difficult to fat-liquor the resultant leather, since the fat is absorbed only with difficulty. If a pelt treated in this way be dried, a soft but rather flat leather results, the colour of which easily rubs off, the leather also tasting intensely bitter.
These disagreeable qualities prevent a general use of this material for tanning purposes; in spite of them, however, picric acid, in admixture with boracic acid, salicylic acid, and glycerol, is used in the production of the so-called transparent leather. The latter is very flexible and possesses great tensile strength, but loses the latter quality when exposed to heat, and, when stored, also loses its flexibility. By simply washing with water, the leather is reconverted into pelt.
When picric acid is treated with hot sulphuric acid and formaldehyde gradually added, a dark coloured water-soluble condensation product is formed which strongly precipitates gelatine. Exposed to the action of bromine, the condensation product yields a mass which is insoluble in water.
Experience has taught that the amino bodies--the basic N-derivatives of the phenols--do not yield substances possessing tannoid properties on condensation. On account of their importance, however, a few have been included in this series of investigations.
Aminobenzene, C_6H_5NH_2, aniline, treated with sulphuric acid, yields the water-soluble aniline sulphate, which, on cautious addition of formaldehyde, yields a reddish-coloured gel, insoluble in water, in addition to a small volume of a reddish-yellow liquid. The latter precipitates gelatine, but is not capable of converting pelt into leather. The insoluble gel is likewise insoluble in alcohol, so that tanning experiments with this substance are excluded.
Dimethylaniline, C_6H_5N(CH_3)_2, when treated with sulphuric acid, yields a product soluble in water which neither reacts with nor fixes formaldehyde. Hence the substance does not precipitate gelatine.
If, on the other hand, nitrosodimethylaniline,
NO
|
## C_6H_4
|
(CH_3)_2
is sulphonated, and the water-soluble sulphonation product heated with formaldehyde for some time, the product remains soluble in water and precipitates gelatine. No tanning effect could, however, be detected.
Arylsulphaminoarylsulphonic acids and arylsulphoxyarylsulphonic acids precipitate gelatine but are devoid of tannoid character. The latter is acquired by compounds belonging to this class containing two or more sulphamino groups, or when they, in addition to one sulphamino group, contain a sulphoxy group and another sulphonic group. According to Ger. Pat., 297,187 (Society oc Chemical Industry, Basle), such compounds are obtained when, for instance, sodium sulphanilide in alkaline solution acts upon nitrotoluenesulphochloride, and the resulting nitrotoluenesulphamino compound is subsequently reduced with acetic acid and iron.
The resulting aminotoluenesulphaminobenzenesulphonic acid is finally treated with p-toluenesulphonic chloride till the latter disappears. A compound of the composition
-----NH-----SO_2-----
^ ^ ^
| | | | | |
## | | | |---NH---| |
## V V V
## SO_2Na CH_2
is thereby obtained, which, when acidified, is readily capable of being used for tanning purposes.
The intermediary product of the aminotoluenesulphaminobenzenesulphonic acid obtained by this process may again be employed for the purpose of reacting with one-half molecule soda and 1 molecule nitrotoluenesulphonic chloride. The following compound is obtained--
---NH---SO_2--- ---NH---SO_2---
^ ^ ^ CH_3 ^
| | | | | | | |
| | | | | | | |
v v ---NH---SO_2--- v v
## SO_3Na CH_3 CH_3
If p-toluenesulphaminobenzenesulphonic chloride is condensed with sodium sulphanilide, a compound,
---SO_2---NH--- NaSO_3
^ ^ ^
| | | | | |
| | | | | |
v v ---SO_2---NH--- v
SO_3Na
is obtained which, when acidified, exhibits tannoid properties.
On condensing sodium phenolsulphonate with nitrotoluenesulphonic chloride, reducing the condensation product and condensing the latter with p-toluenesulphonic chloride, a compound similar to the above is obtained--
---O---SO_2---
^ ^ ^ CH_3
| | | | | |
| | | | | |
v v ---NH---SO_2--- v
NaSO_3 CH_3
Again, a similar product is obtained when p-toluenesulphaminobenzenesulphonic chloride or its homologues or isomers are condensed with sodium-o-cresylsulphonate--
---SO_2---NH--- SO_3Na
^ ^ ^
| | | | | |
| | | | CH_3| |
v v ---SO_2---O--- v
CH_3
The chloride of this compound may again be condensed, for instance, with sodium aminotoluenesulphaminobenzene-sulphonate, and yields the compound--
---NH---SO_2---
^ ^ ^ ---NH---SO_2--- ^
| | | | | | | |
| | | | | | | |
v v ---NH---SO_2--- v v CH
## NaSO_3 CH_3
The three latter compounds, when dissolved in water and the solution acidified, exert tanning action.
It is also possible to employ mixtures of arylsulphaminobenzylsulphonic acids in acidified aqueous solution for tanning purposes. According to Ger. Pat., 297,188, such mixtures are obtained by nitrating benzylchloride and heating with an equimolecular amount of sodium sulphite; the sodium nitrobenzylsulphonate thus obtained is reduced to aminobenzylsulphonic acid with iron and acetic acid, and finally condensed with the calculated amount of p-toluenesulphonic chloride. A mixture o- and p-toluenesulphaminobenzylsulphonic acid [Footnote 1:
Cf. also Ger. Pat, 319,713 and 320,613.] thus results.
Amongst aromatic alcohols the dihydric alcohols show characteristic behaviour; the latter combine with sulphonic acids with the elimination of water, condensation taking place without formaldehyde, and the resulting products being soluble in water and possessing tannoid properties. [Footnote 2: Ger. Pat., 300,567, of 20th September 1917.]
In addition to phenolic mono- and disulphonic acids (and higher sulphonation compounds), the homologues, cresols, xylenols, and naphthols enter into reaction. The two components condense with great ease, liberating heat; dilute solutions (of the components) are heated to about 100° C., the process being complete in a few minutes. The products obtained are exceedingly pure and are easily crystallisable. Employing 1, respectively 2, molecules of sulphonic acid, the reactions take place according to:--
OH CH_2.OH OH OH
}C_6H_4 + HO.C_6H_3{ = H_2O + }C_6H_3-CH_2-C_6H_3{
HSO_3 CH_2.OH HSO_3 CH_2.OH
OH
OH CH_2.OH CH_2.C_6H_3{
}C_6H_4 + HO.C_6H_3{ = 2(H_2O) + HO.C_6H_3{ HSO_3
HSO_3 CH_2.OH | OH
CH_2.C_6H_3{
HSO_3
OH CH_2.OH OH OH
}C_6H_3.CH_3 + HO.C_6H_3{ = H_2O + }C_6H_2.CH_3.CH_2.C_6H_3{
HSO_3 CH_2.OH HSO_3 CH_2.OH
OH
OH CH_2.OH CH_2.C_6H_2.CH_3{
}C_6H_3.CH_3 + HO.C_6H_3{ =2(H_2O) + HO.C_6H_3{ HSO_3
HSO_3 CH_2.OH | OH
CH_2.C_6H_2.CH_3{
HSO_3
OH CH_2.OH OH OH
}(C_10)H_6 + HO.C_6H_3{ = H_2O + }(C_10)H_5.CH_2.C_6H_3{
HSO_3 CH_2.OH HSO_3 CH_2.OH
OH
OH CH_2.OH CH_2.(C_10)H_5{
}(C_10)H_6 + HO.C_6H_3{ =2(H_2O) + HO.C_6H_3{ HSO_3
HSO_3 CH_2.OH | OH
CH_2.(C_10)H_5{
HSO_3
The condensation products above enumerated were tested with regard to their tanning power, both non-neutralised and partly neutralised (1:10, 1:20, and 1:30 c.c. N/10 NaOH) samples being examined. In all cases rapid tannage was observed yielding firm and soft leathers of light brown colour and varying degrees of swollenness.
Relatively to their reactions, all the products strongly precipitate gelatine, whereas only the condensation products of phenol, cresol, and xylenol derivatives give a characteristic coloration with iron salts.
The tannin contents of the non-neutralised condensation products lie between 72-80 per cent.--figures which clearly indicate the purity and efficiency of these substances.
Notable amongst aromatic acids is salicylic acid, C_6H_4.OH.COOH, which at higher temperatures is easily sulphonated with concentrated sulphuric acid; the sulphonation product represents a white solid, which easily dissolves in water forming a clear liquid. The sulphonic acid, when mixed with about one-third of its weight of water and heated to about 120° C., is easily condensed with formaldehyde. Towards the end of the reaction, considerable frothing sets in, but in spite of the high temperature required by this reaction no insoluble bakelites are formed. A reddish-brown fluid is obtained easily soluble in water, to which it imparts a brown colour.
An aqueous solution of the product completely precipitates gelatine, gives a strong opalescence with aniline hydrochloride and a deep violet coloration with ferric chloride.
Neutralised as usual, the product, in a 3° Bé solution, converts pelt within three days into a white, full leather of good tensile strength.
This process has been patented by the Deutsch-Koloniale Gerb und Farbstoff Gesellschaft (German-Colonial Tanning and Colour Extracts Ltd.) in Karlsruhe, the letters patent also including the ring homologues of salicylic acid. Similar results are obtained when cresotinic acid (hydroxy-toluic acid), OH.C_6H_3.CH_3.COOH, is employed as base.
If the phenyl ester of salicylic acid, Salol,
HO.C_6H_4.CO.O.C_6H_5
is sulphonated, a product is obtained which is easily soluble in water, but which is identified as a mixture of the sulphonation products of salicylic acid and phenol, the salol being dissociated on sulphonation. The temperature must not exceed 80° C. by condensation with formaldehyde, or insoluble bakelite will be formed from the phenol; the aldehyde must also be added gradually. An aqueous solution of the partly neutralised condensation product has a pronounced tanning effect on pelt, and converts the latter into leather in one to two days; the leather being very similar to that produced by the salicylic acid condensation product.
The qualitative reactions of the product in aqueous solution are the same as those given by the salicylic acid condensation product.
Salicylic acid may, however, also be condensed with formaldehyde without first being sulphonated; in this case, a little hydrochloric acid should be present. A product slightly soluble in water is obtained, which may be looked upon as being methylenedisalicylic acid. In alkaline solution it is easily soluble,
[Footnote 1: Its solubility in alcohol and alkalies renders this product an effective and cheap substitute for shellac.--Transl.]
the liquid possessing an intensely bitter taste. The sodium salt gives a deep violet coloration with ferric chloride, a slight precipitate with gelatine, and slight opalescence with aniline hydrochloride. In contact with pelt, however, it exhibits no tanning effect, but when dissolved in alcohol, a pickling effect may be observed.
[Footnote 2: A similar reaction is observable in the case of the sodium salts of METHYLENEDISALICYLIC acid brommated or iodised, which form a clear solution varying from red to reddish-brown.]
The attempt at preparing a condensation product from sodium-m-hydroxybenzoate by means of formaldehyde and bisulphite is worthy of attention. A dark brown, viscous liquid is obtained which is perfectly soluble in water, and the aqueous solution of which gives opalescence with gelatine, a precipitate with aniline hydrochloride, and a bluish-black coloration with ferric chloride. Its behaviour towards pelt is very similar to that of phenolsulphonic acid, and it yields a similar leather.
A very similar condensation product was obtained by condensing sodium-p-hydroxybenzoate with formaldehyde and subsequent sulphonation with sulphuric acid. From a practical standpoint, however, these substances cannot be employed, since their tanning action is only effective in acid solutions of such concentration of acid as would gelatinise the pelt.3
If, on the other hand, non-condensed methane derivatives of phenol, e.g., hydroxyphenylmethanesulphonic acid, are partly neutralised and a solution of the product thus obtained used for tanning experiments, no tanning action is observable. The acidified solution does not precipitate gelatine, and gives a dark brown coloration only with ferric chloride.
GALLIC ACID, C_6H_2(OH)_3COOH, when heated with sulphuric acid, is easily converted into the insoluble rufigallic acid, which is also insoluble in alcohol. If, however, gallic acid is heated with an excess of sulphuric acid, the product cooled and treated with formaldehyde, a deep brown condensation product is obtained which is soluble in alcohol, and in this state is capable of converting pelt into a substance similar to leather which, though rather hard, possesses good tensile strength. This water-insoluble condensation product is also soluble in alkalies, the solution exhibiting properties similar to that described above.
Gallic acid, therefore, is not a suitable base for the production of synthetic tannins soluble in water.
Phthalic acid also is difficult to sulphonate: the sulphonated compound treated with formaldehyde gives only water-insoluble condensation products.
- Condensation Of Naphthalene Derivatives
The simplest method of condensing [Greek: b]-naphthalene-sulphonic acid is to heat it at 135° C. at a pressure of 20 mm. for several hours.[Footnote: Austr. Pat., 61,061, of 10th September 1913.] The resulting product is a cheesy mass which reacts strongly acid. By reducing the acidity of the substance to 1 gm. = 10 c.c. N/1O NaOH, a grey, cheesy mass results, which easily dissolves in water, the solution being coloured a light yellow-brown and precipitating gelatine aniline hydrochloride; no coloration, however, appears on adding ferric chloride.
The condensation of [Greek: b]-naphthalenesulphonic acid, however, proceeds with much greater energy in the presence of formaldehyde. In practice, for instance, 10 kilos of naphthalene is heated with the same weight of concentrated sulphuric acid (66° Bé), when the mixture is converted into [Greek: b]-naphthalenesulphonic acid by heating for several hours at 150°-160° C; the sulphonation completed, the sulphonic acid is cooled to about 85° C., and 4 kilos of formaldehyde (30 per cent, by weight) slowly added; finally, the product is stirred at the temperature mentioned till all formaldehyde has combined.[Footnote:
Austr. Pat., 69,194, of 25th June 1915; Ger. Pat, 290,965.]
Tanning experiments with this product yielded, in a short time, a nearly white coloured leather (see later).
In addition to formaldehyde, there are other substances which induce condensation of naphthalenesulphonic acid; if, for instance, sulphur chloride is allowed to act upon [Greek: b]-naphthalenesulphonic acid, a light brown solid of pronounced acidic character is obtained; if the latter is partly neutralised with caustic soda, a greyish-brown solid results, which dissolves in water with a light brown colour, the solution precipitating gelatine and aniline hydrochloride, but giving no coloration with ferric chloride.[Footnote: Austr. Pat., 96,194.]
Tanning experiments with this product in aqueous solution gave a light brown, rather soft leather, and this, in addition to the qualitative reactions of the substance, prove that this method of condensation hardly alters the character of the product from a tanning point of view. The brown coloration imparted to the leather tanned with this condensation product owes its existence to coloured intermediary products.
Attempts at condensing chloronaphthalenesulphonic acid and nitronaphthalenesulphonic acid resulted in soluble condensation products which gave some of the reactions given by the tannins (precipitation of gelatine and aniline hydrochloride), but which were incapable of tanning pelt, a light tannage being effected on the surface only.
[Greek: a]-Naphthol dissolved in hot concentrated sulphuric acid and heated for some time on the water bath, yields the light brown, water-soluble [Greek: a]-naphtholsulphonic acid. A dilute solution of the latter, when treated with formaldehyde in the cold, undergoes no change; on heating the mixture on the water bath a brown precipitate is thrown down. If gelatine solution is added to the opaque liquid, a yellow flocculent precipitate separates. If caustic soda is added to the opaque liquid containing the condensation product described above, a clear solution results from which no deposit separates on the addition of acetic acid. Gelatine is precipitated by this solution.
The concentrated hot a-naphtholsulphonic acid, upon addition of sufficient formaldehyde, effervesces strongly and yields a dark brown condensation product insoluble in water, but soluble in caustic soda. If acetic acid is added in excess to the alkaline solution, the resultant solution strongly precipitates gelatine.
A suspension in water of the insoluble condensation product does not precipitate gelatine.
b-Naphthol, dissolved in hot concentrated sulphuric acid and heated for some time, yields the light brown, viscous b-naphtholsulphonic acid. A dilute solution of the latter, mixed with formaldehyde, remains clear; when heated on the water bath, however, it assumes a dark, reddish-yellow colour, and remains soluble in water and precipitates gelatine strongly. This condensation product, on adding excess of caustic soda, assumes a deep blue coloration, the alkaline solution giving no precipitate with gelatine; on adding acetic acid the solution turns brown, remains clear, and now precipitates gelatine.
The concentrated b-naphtholsulphonic acid heated with formaldehyde on the water bath yields as condensation product a dark, reddish-yellow mass, soluble in water, which precipitates gelatine. A dilute solution, when allowed to act upon pelt, gave in a few days a light brown leather, the properties of which are very similar to those possessed by vegetable tanned leathers.
The use of naphtholsulphonic and aminonaphtholsulphonic acids for the manufacture of synthetic tannins is protected by Ger. Pats., 293,640, 293,693, 293,042, and 303,640. [Footnote: Cf. Austr. Pat., 70,162.]
It is a remarkable fact that non-condensed methane derivatives of naphthol, e.g., b-naphthol-a-methanesulphonic acid, dissolved in water and partly neutralised, are devoid of tanning character when allowed to act upon pelt. Neither does this substance precipitate gelatine, but it does give a deep blue coloration with ferric chloride.
The condensation product of b-naphthol above referred to precipitates gelatine and aniline hydrochloride and gives a brown coloration with ferric chloride.
Thionaphtholsulphonic acid, when acted upon by formaldehyde, yields a condensation product of the following constitution:--
HSO_4 ^ ^ SH SH ^ ^ HSO_4
| | | | | |
## | | |_____CH_2_____| | |
v v v v
This is a light yellow powder which, dissolved in water, yields an opaque solution; the latter only exhibits any tanning properties when it is not neutralised and even slightly acidified and then precipitates gelatine, aniline hydrochloride and barium chloride; dissolved in alkali, it forms a clear, yellow solution devoid of tannoid properties. Leather tanned with the acidified solution is very similar to those tanned with the phenolsulphonic acid condensation products; its colour, however, is more pronouncedly yellow.
b-Naphthol condensed with hydrochloric acid and formaldehyde yields a methylenedinaphthol, which is insoluble in water; the sodium salt, however, easily dissolves. The same condensation, however, takes place in alkaline solution with direct formation of the sodium salt. The condensation product gives a slight precipitate with gelatine, and a bluish-grey precipitate with ferric chloride; acids re-precipitate the insoluble methylene compound. Towards pelt it exhibits tanning properties, whereby the insoluble product referred to above is deposited, and soft, full, and white leather is obtained, possessing, however, but little tensile strength.
- Condensation of the Anthracene Group
Anthracene heated with excess sulphuric acid yields the water-soluble anthracenesulphonic acid; the latter, when heated with formaldehyde, yields water-soluble, reddish-brown condensation products, which remain soluble on prolonged heating with formaldehyde. The aqueous solution of the condensation product shows no particular reactions; it gives a flocculent precipitate with gelatine and a green precipitate with copper sulphate, soluble with blue colour in excess of the reagent.
The partly neutralised solution tans pelt--to which it imparts a brown colour--in eight days, but on the surface only; the inner layers are merely pseudo-tanned (white colour). When dried, pelt thus treated yields a full and soft leather with brown grain and flesh possessing but little tensile strength. Hence, this condensation product exerts a pickling rather than a tanning effect.
Anthraquinone heated with sulphuric acid and treated with formaldehyde in the usual manner, yields a substance which, when mixed with water, forms an opaque, milky solution. This is not altered by excess of caustic soda. The aqueous solution precipitates gelatine and aniline hydrochloride; all other tannin reagents give no reaction.
The partly neutralised solution of the condensation product exerts, in the main, a pickling action on pelt; only the surface of which is tanned, with brown colour, the remainder being merely pickled (white colour). During "tannage," bakelite is formed in the liquid, and practically all solubles originally present are deposited. The tannage completed, a light brown, fairly soft and full leather, possessing little tensile strength, results; this leather can be washed only with great difficulty and approaches more the character of a pickled pelt.
1-Hydroxyanthraquinone, 1,5-dichloroanthraquinone, l,5-diaminoanthraquinone, 1-methylaminoanthraquinone, 1-benzoylamino, 6-chloranthraquinone, 1-m-toluidoanthraquinone, when treated with sulphuric acid and formaldehyde, all yield condensation products which are but little soluble in water, and which do not at all precipitate gelatine. Tanning experiments with these condensation products in alcoholic solution yielded empty leathers of pronounced pickle character.
If, however, 1-methylamino-4-bromanthraquinone is condensed with sulphuric acid and formaldehyde, a condensation product is obtained which is but slightly soluble in water, but which precipitates gelatine.
When phenanthrequinone is heated with excess of sulphuric acid for some time, a water-soluble, reddish-yellow coloured condensation product results. The latter, when treated with formaldehyde in the cold and then finally heated, gradually fixes the formaldehyde and forms a substance soluble in water. If the heating, however, is prolonged, insoluble bakelites are formed, which are neither soluble in alkali nor in alcohol.
An aqueous solution of these condensation products gives no reactions with the usual tannin reagents, though it completely precipitates gelatine. When acting upon pelt, the partly neutralised dilute solution of the condensation product pickles the former, and after a few days the pelt is converted into a light brown, full, and rather soft leather possessing good tensile strength.
When the condensation product is acted upon by bromine in hot aqueous solution, an additive compound is formed and the resulting product is soluble in water. The aqueous solution of the brominated product gives no special reactions with the usual tannin reagents, but precipitates gelatine completely. Its tanning action upon pelt is much slower than that of the original condensation product; the surface of the pelt only is tanned with brown colour, the inner pelt being only pickled (light brown colour). When dried, a hard and empty leather of good tensile strength is obtained, possessing mainly the properties of a pickled pelt.
CO OH
^ ^ ^
QUINIZARENE, | | | | , treated with sulphuric acid
| | | |
v v v
## CO OH
and formaldehyde, yields a condensation product which is but little soluble in water and which does not precipitate gelatine.
QUINOLINE, when sulphonated and condensed with formaldehyde, yields a dark coloured condensation product, completely soluble in water; the solution does not precipitate gelatine.
OXYQUINOLINE exhibits similar behaviour.
On the other hand, the use of retene (methylisopropylphenanthrene),
CH_3 ^ ___________ ^
| | | |
## | |___CH:CH___| |
C_3H_7 v v
for the production of synthetic tannins, is protected by Ger. Pat., 290,965 [Footnote 1: Cf Austr. Pat., 69,194]
- Di- and Triphenylmethane Groups
If DIPHENYLMETHANE, (C_6H_5)_2CH_2, is heated with excess sulphuric acid, a dark blue mass, easily soluble in water, is obtained. The product gently heated with formaldehyde yields a brown, water-soluble condensation product; once condensation is complete, the product will stand stronger heat. If, on the other hand, more formaldehyde is added, brown, water-insoluble bakelites are formed. The water-soluble condensation product precipitates gelatine, but not aniline hydrochloride.
Dissolved in water, it possesses tannoid properties: the pelt is, however, tanned on the surface only, the intermediary layers being merely pickled; after four days in the solution, the pelt after drying was found to be converted into a greyish-brown, badly coloured leather, which was empty, hard, and possessed but little tensile strength.
CARBAZOLE (dibenzopyrrole),
^ _____ ^
| | | |
| |__ __| |
v v v
## N_3
on the other hand, was found a suitable base for the commercial production of synthetic tannins; its use is protected by Ger. Pat, 290,965.
TRIPHENYLMETHANE, (C_6H_5)_3CH, heated with excess sulphuric acid, yields a nearly black mass which, when condensed with formaldehyde in the cold, and subsequently heated, yields a mass which is soluble in water. With gelatine and aniline hydrochloride it exhibits reactions similar to those given by the diphenylmethane condensation products; its tanning properties also are similar to those of the latter. The resultant leather is black, but is soft and full and possesses good tensile strength.
Baeyer's observation, [Footnote: Ber., 1872, 5, 280, 1096.] that pyrogallol on condensation with formaldehyde yields an amorphous body soluble in water, which precipitates gelatine and is very similar to tannin, was confirmed by Caro [Footnote: Ibid., 1892, 25, 947.] and Kahl. [Footnote: Ibid., 1898, 31, 114.] These investigators found that by the condensation of phenols and hydroxybenzoic acids with formaldehyde, diphenylmethane derivatives were formed; pyrogallol yields hexahydroxydiphenylmethane--
C_6H_2(OH)_3
CH_2{
C_6H_2(OH)_3
Nierenstein [Footnote: Collegium, 1905, 221.] repeated these experiments, and found that in addition to the insoluble diphenylmethanes, water-soluble bodies were formed, which latter precipitate gelatine. The condensation product yielded by gallic acid was identified as hexahydroxyaurinecarboxylic acid--
_C_6H(OH)_3COOH
C{-C_6H(OH)_3COOH
| }C_6H(OH)_2COOH
O
which is formed in addition to hexahydroxydiphenylmethane-dicarboxylic acid--
C_6H(OH)_3COOH
CH_2{
C_6H(OH)_3COOH
Baeyer's experiment with pyrogallol probaly also yields, according to Nierenstein, another compound of the following constitution--
C_6H_2(OH)_3
C{-C_6H_2(OH)3
|}C_6H_2(OH)_2
O
Nierenstein considers these bodies confirmation of his hypothesis of the existence of a "tannophor,"--CO--, in the tannins.
This supposition was adopted by Stiasny [Footnote: Gerber, 1905, 233.] and Kauschke [Footnote: Collegium, 1906, 362.] and the latter points out that these easily soluable substances exhibit tanning properties.
Nierenstein [Footnote: Ibid., 1906 424.] was further able to show that by all processes of condensation between phenols (or hydroxybenzoic acids) and formaldehyde, compounds of the character of hydroxyaurine (or hydroxyaurinecarboxylic acid) were formed in addition to the insoluble hydroxydiphenylmethanes (or hydroxydiphenylmethanecarboxylic acids), the former possessing the characteristic tannophor group and hence precipitating gelatine, i.e., exerting tanning action. If the formation of leather is viewed in the light of Schiff's base, [Footnote: Ibid., 1905, 159.] one may consider the constitution of a hexahydroxyaurinecarboxylic acid leather as follows:--
_C_6H_2(OH)_3.COOH
C{-C_6H_2(OH)3.COOH
|}C_6H_2(OH)_2.COOH
R-N
In the preparation of these and similar condensation products, Nierenstein and Webster [Footnote: Ber., 1908, 41, 80.] observed a peculiar steric effect of the carboxyl group. Each 2.5 gm. of the phenol or the acid in question were dissolved in 30 c.c. of water, the solution brought to boil and 5 c.c. formaldehyde (20 per cent.) and 2.5 c.c. hydrochloric acid added drop by drop; the precipitate formed was filtered off after twenty-four hours, dried at 110° C. to constant weight, extracted (in a Gooch crucible) freely with water, and the residue again dried at 110° C. till constant. The following values were obtained:--
Total Insol. Aq. Sol. Aq. Oxy-
Precipitate Diphenylmethane aurinecarboxylic
in Grammes. Derivatives Acid.
Per Cent.
Per Cent.
Phloroglucinol 2.4002 100 ...
Hydroquinone 2.3716 100 ...
" 2.0542 100 ...
Pyrogallol 2.5150 100 ...
" 2.7940 100 ...
Pyrocatechol 2.9805 100 ...
" 2.9574 100 ...
Resorcinol 2.9954 100 ...
" 2.9725 100 ...
Gallic acid 2.0706 78.84 21.16
" 1.2240 83.18 16.82
" 1.1405 59.94 41.06
[Greek: b]-Resorcylic acid 2.1040 51.08 48.92
" " 2.2008 47.12 52.88
Protocatechuic acid ... ... ...
" " ... ... ...
Vanillic acid ... ... ...
Tannin 2.0599 ...
Nearly all sol.
Digallic acid 2.1042 80.16 19.84
Leucodigallic acid 2.0041 1.94 98.06
With the introduction of the carboxylic group the tendency of condensation to diphenylmethane derivatives is lessened; by protocatechuic acid the tendency is nil.
Nierenstein considers this reaction analogous to the formation of cork, to the genetic relation of which with the diphenylmethane formation Drabble and Nierenstein have referred in an earlier publication. [Footnote: Biochemical Jour.., 1907, 2, 96.] It is hence possible that the plants may employ formaldehyde as a methylation medium, and produce these insoluble condensation products for the purpose of ridding themselves of the poisonous phenols and aromatic hydroxy acids (and tannins), in addition to oxidising processes whereby phlobaphenes, ellagic acid, etc., are formed.
The reaction between phenols and aldehydes has been further studied by Michael, [Footnote: Amer.Jour., 5, 338; 9, 130.] who prepared a condensation product from phenol and resorcinol with benzaldehyde, and Russanow, [Footnote: Ber.9 1889, 22, 1944.] who also employed benzaldehyde and phenol. Lipp [Footnote: Diss., Bern., 1905.] investigated the action of benzaldehyde and piperonal on phenols, anisoles, cresols, cresylic ether, resorcinol, and the ether of the latter and phenol, and showed that when free phenols are condensed with benzaldehyde the hydroxyls occupy the same position as by the interaction between benzaldehyde and the corresponding phenolic ethers.
The resulting dihydroxytriphenylmethane derivatives form beautiful crystals, which on oxidation are converted into benzaurines, the constitution of the latter probably being--
O= ^=_____ ^ OH
| | | |
| |== __| |
=v v v
## C
|
C_6H_5
In alkalies, the hydroxylated triphenylmethanes dissolve without imparting any colour to the solution; by concentrated sulphuric acid they are taken up with intense coloration.
If the hydroxyls occupy the ortho-position to methyl, they may form xanthenes by splitting off water--
O
^ ^ ^
| | | |
| | | |
CH_3 v v v CH_3
## CH
|
## C_6H_5
In the benzene series this reaction is difficult to establish, and has to be induced by distilling the particular dihydroxy-diphenylmethane at ordinary pressure. In the naphthalene series, on the other hand, the ring closes up by, for instance, the condensation of [Greek: b]-naphthol with benzaldehyde or paraldehyde, and yields the following compounds:--
C_10H_6 C_10H_6
C_6H_5-CH{ }O CH_3-CH{ }O
C_10H_6 C_10H_6
These xanthenes are white, silk-glossy needles, which are soluble in water and in alkalies. In concentrated sulphuric acid, they are taken up with beautiful fluorescence.
- Summary
From the qualitative reactions of the different condensation products described it may be seen that their tannoid properties are not dependent on whether they precipitate gelatine or are adsorbed by hide powder or not. Hydroxynaphthylmethanesulphonic acid, for instance, precipitates gelatine but does convert pelt into leather; on the other hand, sodium dicresylmethanesulphonate does not precipitate gelatine, and neither does it tan pelt; nevertheless it is adsorbed by hide powder as "tanning matter". The author discovered that o-nitrophenol does not precipitate gelatine, but has some tanning action on both hide powder and pelt.
Relatively to the possibilities of forming condensation products possessing tannoid properties, the following may be stated:--
All mono- and polyhydric phenols may be converted into true tanning matters by either condensing them as such, or after their conversion into the corresponding sulphonic acids, by substances capable of eliminating the elements of water. It makes no difference to the final product whether the condensation is the first step followed by sulphonation and consequent solubilisation of the intermediary insoluble product, or whether, vice versa, the sulphonic acid is subjected to condensation. Alkaline solution of phenols may also be condensed, the reaction products, when condensed, constituting tanning matters soluble in water.
Among the substitution products of the phenols, the thio-, chloro-, bromo-, nitro-, and aminophenols as a rule yield tanning matters similar in character.
The quinones are as such--i.e., without being condensed--substances possessing tannoid properties.
The aromatic dihydric alcohols are easily condensed with the different sulphonic acids and yield valuable tanning matters.
Of aromatic acids all those which yield water-soluble sulphonation products seem suitable for the industrial production of tanning matters. If the acids themselves do not yield water-soluble sulphonation products, the alkali salts of the latter may be condensed with formaldehyde, and the resulting products then constitute tanning matters provided their solutions can be neutralised or faintly acidified without the solute being thrown out of solution in insoluble form.
The diphenyl derivatives of the above groups often possess tannoid properties.
The same holds good of those compounds with condensed nuclei (naphthalene, anthracene, etc.), and all their derivatives which satisfy the above conditions.
The choice of condensing agent is, as a rule, of little significance. Elimination of the elements of water by the mere application of heat succeeds in few cases only, since the high temperature required to induce reaction in many cases causes decomposition of the substances. This difficulty is overcome by heating in vacuo. Condensation with formaldehyde always succeeds, with acetaldehyde and benzaldehyde only partly.
The action on hide powder, pelt, and gelatine by these characteristic substances is tabulated below:-- Relative Behaviour towards Substance. Gelatine. Hide Powder Pelt Formaldehyde ... ... Tanning Phenol Ppte. ... ...
Chlorophenol " ... ...
Surface
Tribromophenol Slight ppte Tanning tanning
o Nitrophenol No ppte " "
Bromonitrophenol Slight ppte " "
Trinitrophenol Ppte " Tanning
Bromotrinitrophenol Slight ppte " "
p Aminophenol Ppte ... ...
m Dihydroxybenzene " ... ...
Orcinol " ... ...
p Dihydroxybenzene " Tanning Tanning
Monochloro p
dihydroxybenzene " ... ...
o Dihydroxybenzene " ... ...
Pyrogallic acid " ... ...
Surface
Tribromopyrogallic acid " Tanning Tanning
Gallic acid No ppte Not tanning Not tanning
Bromophloroglucinol Ppte Tanning "
Gallotannic acid " " Tanning
Galloflavine Slight ppte " Not tanning
Quinone " " Tanning
Bromosalicylic acid " " Not tanning
Dinaphthylmethanedisulphonic acid Ppte " Tanning
Diphenylmethanedisulphonic acid " " "
Dicresylmethanedisulphonic acid " " "
Sodium
dicresylmethanedisulphonate acid No ppte " Not tanning
Dixylylmethanedisulphonic acid Ppte " Tanning
Naphtholdisulphonic acid " Not tanning Not tanning
Methylenedinaphthol " Tanning Tanning
Hydroxyphenylmethanesulphonic " " "
acid Not tanning
Hydroxynaphthylmethanesulphonic Slight ppte " "
acid
Diaminonaphthylmethanedisulphonic Ppte Tanning Not tanning
acid
Dihydroxynaphthylmethanedisulphonic
acid " " "
Dichloronaphthylmethanedisulphonic
acid " " Surface tanning
Dinitronaphthylmethanedisulphonic
acid " " "
Dithionaphthylmethanedisulphonic
acid " " Tanning
Bromo [Greek: b] naphthol [1] Slight ppte " "
Rosolic acid_ [1] Ppte " "
[Footnote 1: In alcoholic solution.]
SECTION III
TANNING EFFECTS OF MIXTURES AND NATURAL PRODUCTS
- Mixture of Phenolsulphonic Acid and Formaldehyde
The most important invention relatively to the search for new tanning materials was that of Weinschenk,[Footnote: Ger. Pat., 184,449.] who first showed that pelt may be converted into leather by the action upon it of mixtures of naphthols and formaldehyde. This process consists of two steps: the pelt is first immersed in a 0.25-0.50 per cent, formaldehyde solution, and secondly in an aqueous solution of -[Greek: a] or -[Greek: b] naphthol; this order may be reversed.
If, on the other hand, a pasty mixture is made of formaldehyde and naphthol, and this is allowed to act upon the pelt, the latter is rapidly converted into leather, but the mixture must be administered very gradually or otherwise the insoluble methylenedinaphthol is formed outside the pelt and hinders any tanning effect.
Leather obtained through the action of [Greek: a]-naphthol is, when freshly tanned, pure white and sufficiently soft and firm, but quickly assumes a brown colour on storing; if, however, [Greek: b]-naphthol is employed, a cream-coloured leather results, the colour of which turns only slightly more yellowish even when exposed to the direct rays of the sun.
A similar process has recently (25, xii., 1915) been protected by Ger. Pat, 305,516, granted to the Deutsch-Koloniale Gerb--und Farbstofif Gesellschaft, in Karlsruhe. According to this patent, pelt is treated in separate solutions, one of which is formaldehyde, the other being that of such aromatic compounds or their salts which yield water-soluble condensation products with formaldehyde; for example, pelt is immersed in 2-5 per cent, solution of formaldehyde for a few days, and is subsequently treated with 1-2 per cent neutral or faintly acidified solutions of [Greek: a]-naphthylamine hydrochloride, resorcinol or sodium phenate or cresylate, for several days.
The resultant leather is claimed to be soft and full and to possess good tensile strength.
The tanning properties of mixtures of phenolsulphonic acid and formaldehyde have been examined by the author with the following results:--
I. II. III.
Grammes formaldehyde 10 20 40
" phenolsulphonic acid 20 50 100
" caustic soda (sol, 40 per cent.) 10 20 40
" water 500 500 500
The above solutions were made up and allowed to act upon pelt pieces weighing 15 gm.; whereas Solution I. remained clear throughout the experiment, Solution II. became somewhat clouded, and Solution III. assumed a milky appearance. The pelts were tanned through in seven days and yielded leathers which, after drying and finishing, possessed yellow colour, long fibre, and good tensile strength, but a rather empty feel.
To prevent separation of insoluble matter during tannage, another experiment was carried out, in which the pelts were first submitted to the action of formaldehyde (10, 20, and 40 gm. in 500 c.c. water) for three days, being subsequently removed to fresh solutions of partly neutralised phenolsulphonic acid (cf. above). Similar results were obtained, but the leather felt even more empty than those obtained by the former experiment.
Attempts at converting pelt into leather by first immersing the pelt in a partly neutralised solution of phenolsulphonic acid, and subsequently transferring it to fresh solutions of formaldehyde, gave merely negative results; the phenolsulphonic acid effected pickling action upon the pelt, but was subsequently quickly replaced by the formaldehyde, before the latter had penetrated the pelt in sufficient quantity to induce condensation, thereby exerting tanning action.
To explain the tanning effects of these mixtures, the author analysed the leathers resulting from the effects of the latter, and was able to show, that in these cases also, condensation of phenolsulphonic acid and formaldehyde takes place inside the pelt, since on the one hand the analyses left no doubt but that true tannage had been effected, and on the other hand an ammoniacal extract of the leathers gave the typical reaction for condensation products of phenolsulphonic acid, with aniline hydrochloride. [Footnote: Collegium 1913, 516, 142.]
The leather analyses gave the following figures:--
Moisture - - - 18.30 per cent.
Fats - - - - 0.47 "
_ Ash - - - - 0.98 "
Leather { Tannin - - - 26.37 "
substance { Hide substance - - 53.88 "
A characteristic feature is the low value of tannin, which is considerably higher [Footnote: Ibid., 1913, 521, 478.] where condensation products of phenolsulphonic acids are used as tanning agents; the action effected by the separate constituents, therefore, is more that of pickling.
- Mixture of Phenolsulphonic Acid and Natural Tannins
A piece of pelt was immersed in a half-neutralised solution, measuring 6° Bé., of phenolsulphonic acid, and left sixteen hours in the solution, which completely penetrated the pelt during this time; it was then transferred to a 12° Bé. solution of a mixture of quebracho and chestnut, which in two days converted the pelt into a light coloured leather possessing good tensile strength.
By using a bath composed of half-neutralised phenolsulphonic acid and quebracho extract in 7° Bé. solution, another piece of pelt was completely tanned in two days. The same result was obtained by first half neutralising the phenolsulphonic acid and then adding sulphited quebracho extract till a 5° Bé. solution was obtained.
A piece of pelt received a 2º Bé. liquor composed of 3 parts of phenolsulphonic acid and 1 part of formaldehyde for sixteen hours, and was then completely penetrated; it was subsequently transferred to a 10º Bé. liquor composed of chestnut and quebracho, being completely tanned in two days. The same result was obtained on adding sufficient sodium sulphate to the above mixture of phenolsulphonic acid and formaldehyde to raise the density from 2º-3º Bé.
Sixty grammes of phenolsulphonic acid were partly neutralised with 100 c.c. of a 10 per cent solution of caustic soda, and 10 c.c. formaldehyde added to 400 c.c. of the mixture (2º Bé.): a piece of pelt was completely penetrated by the solution in sixteen hours, and was subsequently tanned in two days, using an extract of 10º Bé.
Similarly, by treating a pelt with 400 c.c. of a half-neutralised solution of phenolsulphonic acid (3º Bé.) plus 8 c.c. formaldehyde, and adding after eighteen hours sulphited quebracho extract to the same bath, strengthening the latter to 6º Bé., the pelt was converted into leather in two days; in this case, however, much of the tannin was precipitated by the formaldehyde present in the solution.
If, on the other hand, a mixture of 80 gm. dilute phenolsulphonic acid (1:1 aq) and 14 gm. of formaldehyde were cooled for several hours and subsequently strengthened with sulphited quebracho extract to 7º Bé., no tannin was precipitated in the liquor, and a piece of pelt immersed in the latter was completely tanned in sixteen hours.
To prevent the precipitation of tannin caused by the formaldehyde, sulphite cellulose extract (wood pulp) was substituted for sulphited quebracho extract, and the following experiments carried out:--
To 200 c.c. of a 6º Bé. sulphite cellulose extract plus 200 c.c. of half-neutralised phenolsulphonic acid solution was added 15 c.c. formaldehyde, and this solution tanned pelt in four days; the resultant leather was light brown, firm, and possessed good tensile strength and long fibre.
Another piece of pelt was immersed in a solution of 400 c.c. phenolsulphonic acid of 3ºBé. plus 15 c.c. formaldehyde for eighteen hours, and was then tanned in a 6º Bé. solution of sulphite cellulose extract. The resultant leather was extremely light coloured, and possessed qualities similar to those described in the former experiment. Finally, pelt was immersed in a 6° Bé. solution composed of 140 gm. of a 15° Bé. sulphite cellulose extract, 10 gm. of formaldehyde, 400 gm. water, 15 gm. phenolsulphonic acid, and 30 gm. of a 10 per cent caustic soda solution, and was tanned in four days. This leather also was coloured light brown, of good tensile strength, and rather firm.
These experiments prove that when pelt is treated with formaldehyde, phenolsulphonic acid, and vegetable tannins, the two former components effect, more or less, actual tannage; it is admittedly a matter of some difficulty to establish whether the effect is one of pickling or pseudo-tannage, or whether the tannage may be considered a true one. The final effect, however, is nearly always that of a true tannage, i.e., by varying the composition of the tanning solutions leather is obtained with properties identical with those tanned with true tannins of vegetable origin.
The only difficulty encountered in these combinations is the property of formaldehyde, of precipitating the natural tannins, and it is hence essential, for practical purposes, to so arrange the combination that their value is not reduced by the property referred to.
The fact that not only compounds already existing may convert pelt into leather, but that a similar effect is obtained inside the pelt, by their components, is indeed of theoretical interest.
- Tanning Effects of Different Natural Substances
In addition to the vegetable tannins, Nature has also provided other substances of vegetable origin, which, admittedly, do not effect tannage in their original state, but which may, by suitable treatment, acquire this property. The oldest information on this point is supplied by Resch, [Footnote: Scherer's Jour., 1801, 6, 495.] who carried out tanning experiments, using three parts of peat and one part of oak bark.
By the action of nitric acid on substances of vegetable and animal origin, Hatchett, [Footnote: Gehlen's Jour., 1805, 1, 545.] Chevreul, [Footnote: Ann. Chim., 1810, 73, 36.] and Vogel [Footnote: Jour. Chem. Phys., 1812, 6, 101.] claim to have obtained tanning materials, whilst later, Buff [Footnote: Ibid., 1827, 51, 38.] obtained a material suitable for tanning purposes from indigo.
By subsequent treatment with lime and soot, or tar, Ashmore [Footnote: Dingier's Jour., 1833, 48, 67.] claims to have converted pelt into leather.
By treating peat with nitric acid, Jennings [Footnote: Jahresber. d. Chem., 1858, 666.] and Payne [Footnote: Chem. Centralbl., 1908, ii. 554; Ger. Pat., 200, 539.] have produced artificial tanning materials.
Skey [Footnote: Chem. News, 1866, 206; Zeits. f. Chem., 1866, 753.] obtained a dark brown extract, soluble in water and precipitating gelatine, by treating bituminous coal or lignite with nitric acid; by extracting coal with alkalies, Reinsch [Footnote: Pharm. Centralh., 1887, 141.] isolated a substance (pyrofuscine) which, when partly neutralised with carbon dioxide, was capable of converting pelt into leather.
In addition to these tanning materials the recovery of a substance possessing tanning properties from the so-called acid rosins has been made the subject of a patent; [Footnote: Ger. Pat., 36,019.] this rosin is formed when crude oil is treated with concentrated sulphuric acid in the oil refineries. The greasy substance is partly neutralised with alkali and is claimed to produce a very springy leather.
The waste liquors obtained in the manufacture of cellulose, the so-called sulphite and sodium cellulose waste, have, however, been the subject of numerous investigations, and several hundred publications have appeared and a great number of patents [Footnote: "Literatur überiSulfitablauge" 1910-13. (Reprint from WocheWochenblPapiePapierfabrikation)] taken out, the first one being that of Mitscherlich [Footnote: Jahresber. d. Chem., 1893, 890;
Ger. Pat., 72,161.] and Hönig [Footnote: Chem. Centralbl., 1902, ii. 174; Ger. Pat., 132,224.]
The waste liquors contain large quantities of acids and lime, and in order to utilise the liquors for tanning purposes, the excessive sulphuric and sulphurous acids as well as the lime must be removed. The active tannin is no doubt the ligninsulphonic acid, and those cellulose extracts containing the largest amounts of free ligninsulphonic acid may also be considered the most efficient.
According to the author,[Footnote: Technikum, 1912, 20, 156.] such sulphitecellulose extracts precipitate gelatine, aniline hydrochloride, ammoniacal zinc acetate, and basic coal-tar dyes, and give a greenish-black coloration with ferric chloride. These reactions indicate the presence of tanning matters in cellulose extracts.
The official shake method of analysis gives the following results:--[Footnote: Ibid.]
Tanning matters 23.0 per cent.
Non-tannins 30.3 " Insoluble matters 0.7 " Water 46.0 " --------------- 100.0 per cent.
Ash 4.3 " Sulphurous acid 0.6 "
Many other substances have been used for tanning experiments, a number of them precipitating gelatine. Zacharias [Footnote: Zeits. f. Ang. Chem., 1907, 1645.] obtained leather by the action of many coal-tar dyes on pelt, similarly Herzog and Adler, by using Prussian blue, Neufuchsin, patent blue V, crystal violet, and colloidal gold.
Most inorganic substances possess tanning properties when in the colloidal state, e.g., sulphur, halogens, chromium salts, iron salts, silver oxide, and the salts of mercury, copper, bismuth, zinc, lead, platinum, cesium, vanadium, and the rare earths (salts of cerium, lanthanum, didymium, neodymium, thorium, and zerconium).
For practical purposes, however, only sulphur, chrome, and alum salts are used, the latter two being of the greatest importance.
SECTION IV
METHODS OF EXAMINING TANNING MATTERS
Whereas the evaluation of vegetable tanning matters necessitates determinations of their practical applicability in addition to qualitative and quantitative analyses, the latter two determinations are of practically no value when dealing with synthetic tannins. The way in which tanning matters obtained by chemical means exert their action, in addition to the intensity with which they convert pelt into leather, is the only criterion of their quality for practical (tanning) purposes; both may be demonstrated by experimental tests.
When dealing with the natural tanning materials it is desirable to know their contents of actual tanning matter, from which their special qualities as tanning agents may be deduced. Where the vegetable tanning materials have already been converted into extracts, it is essential to establish the identity of the original material used by the qualitative reactions of the extract in addition to the quantitative estimation of actual tannin contents.
It is frequently necessary to examine whether the extract in question has been actually prepared from the material giving the extract its name, or whether the extract has suffered the addition of other extracts of tanning materials of but low quality. Such determinations may be undertaken by microscopical observations and by means of qualitative and quantitative reactions; for this purpose many colour reactions and precipitation methods are available in addition to the determination of the molybdenum figure (Lauffmann),[Footnote:
Collegium, 1913, 10.] the alcohol and ethyl acetate figures and microscopical examination (Grasser).[Footnote: Ibid., 1911, 349.] Of other adulterants tending to reduce the quality of extracts may be mentioned sugars, mineral salts, and coal-tar dyes; [Footnote: Grasser, Collegium, 1910, 379.] for the determination of these, the special literature should be consulted. [Footnote: Grasser, "Handbuch f. gerbereichem. Laboratorien" (Leipzig, 1914);
Procter-Paessler, "Gerbereichem. Untersuchungen" (Berlin, 1901).]
Two methods are devised for the purpose of quantitatively determining the tannin contents, both of which employ hide powder, and which are known as the "shake method" and the "filter bell method" respectively: the former is adopted as the official method of the "International Association of Leather Trades' Chemists" (I.A.L.T.C.). [Footnote: And also by the Society of Leather Trades' Chemists.-Transl.]
The original method, [Footnote: Leather Manufacturer, 1894, No. 9 J.S.C.I.,1894, 494.] worked out in the laboratory of the Yorkshire College (now the University of Leeds), essentially consists in introducing 6-9 gm. of hide powder in a shaker, washing it at least twice with distilled water and carefully squeezing out the powder in a linen cloth between each washing. 100 c.c. of the solution to be examined, which may not contain more than 1 per cent, total solids, are introduced into the shaking bottle which is then weighed.
About one-third of the washed hide powder is then added, and the bottle shaken ten to fifteen minutes; another third is then added and, after shaking, the third portion. The bottle plus contents is now weighed, and the amount of hide powder introduced ascertained by difference of the two weighings. The liquid is then filtered through filter paper, 50 c.c. of the clear filtrate evaporated in a basin, dried and weighed.
The residue in the original solution is then obtained by multiplying the former by 100 (plus weight of water added with hide powder), and dividing by 100.
This method was closely investigated by a large number of leather trades' chemists, was considerably improved, and in its final form presented a method of the highest degree of accuracy; the method was therefore adopted as The Official Method of Tanning Analysis by the I.A.L.T.C., which body, at the same time, gave precise instructions as to the details of the method. The latest instructions, which are reprinted below, permit of any method of analysis which observes the following conditions:--
- The solution for analysis must contain between 3.5 and 4.5 gm. of
tanning matter per litre, and solid materials must be extracted so that the greater part of the tannin is removed at a temperature not exceeding 50° C.
- The total solubles must be determined by the evaporation of a
measured quantity of the solution previously filtered till optically clear, both by reflected and transmitted light. This is obtained when a bright object such as an electric light filament is distinctly visible through at least 5 cm thickness, and a layer of 1 cm. deep in a beaker placed on a black glass or black glazed paper appears dark and free from opalescence when viewed from above. Any necessary mode of filtration may be employed, but if such filtration causes appreciable loss when applied to a clear solution, a correction must be determined and applied as described in paragraph 6.
Filtration shall take place between the temperatures of 15° C. and 20° C. Evaporation to dryness shall take place between 98.5° C. and 100° C. in shallow, flat-bottomed basins, which shall afterwards be dried until constant at the same temperature, and cooled before weighing for not less than twenty minutes in air-tight desiccators over dry calcium chloride.
- The total solids must be determined by drying a weighed portion of
the material, or a measured portion of its uniform turbid solution, at a temperature between 98.5° C. and 100° C. in shallow, flat-bottomed basins, which shall afterwards be dried until constant weight at the same temperature, and cooled before weighing for not less than twenty minutes in air-tight desiccators over dry calcium chloride.
"Moisture" is the difference between 100 and the percentage of total solids, and "insoluble" the difference between "total solids" and "total solubles."
- Non-Tannins.--The solution must be detannised by shaking with
chromed hide powder till no turbidity or opalescence can be produced in the clear solution by salt-gelatine solution. The chromed powder must be added in one quantity equal to 6.0-6.5 gm. of dry hide powder per 100 c.c. of the tanning solution, and must contain not less than 0.2 per cent. and not more than 1 per cent. of chromium calculated on the dry weight, and must be so washed that in a blank experiment with distilled water, not more than 5 mg. of solid residue shall be left on evaporation of 100 c.c. All water contained in the powder should be determined and allowed for as water of dilution.
- Preparation of Infusion.--Such a quantity of material shall be
employed as to give a solution containing as nearly as possible 4 gm. of tanning matter per litre, and not less than 3.5 or more than 4.5 gm. Liquid extracts shall be weighed in a basin or beaker and washed with boiling water into a litre flask, filled up to the mark with boiling water, and well mixed and rapidly cooled to a temperature of 17.5° C., after which it shall be accurately made up to the mark, again well mixed, and filtration at once proceeded with. Sumac and myrabolam extracts should be dissolved at a lower temperature.
Solid extracts shall be dissolved by stirring in a beaker with successive quantities of boiling water, the dissolved portions being poured into a litre flask, and the undissolved being allowed to settle and treated with further portions of boiling water. After the whole of the soluble matter is dissolved, the solution is treated similarly to that of a liquid extract.
Solid tanning materials, previously ground till they will pass through a sieve of sixteen meshes per square centimetre, are extracted in Koch's or Procter's extractor with 500 c.c. of water at a temperature not exceeding 50° C.; the extraction is then continued with boiling water till the filtrate amounts to 1 litre. It is desirable to allow the material to soak for some hours before commencing the percolation, which should occupy not less than three hours, so as to extract the maximum of tannin. Any remaining solubles in the material must be neglected or reported separately as "difficultly soluble" substances.
The volume of liquid in the flask must, after cooling, be accurately made up to 1 litre.
- Filtration.--The infusion shall be filtered till optically clear
(vide 2). No correction for absorption is needed for the Berkefeld candle, or for S. and S. 590 paper [Footnote: Schleicher and Schüll, Düren (Rheinland), Germany.] if a sufficient quantity (250-300 c.c.) is rejected before measuring the quantity for evaporation, and the solution may be passed through repeatedly to obtain a clear filtrate.
If other methods of filtration are employed, the average correction necessary must be determined in the following manner:--About 500 c.c. of the same or a similar tanning solution is filtered perfectly clear, and after thorough mixing 50 c.c. is evaporated to determine "Total Soluble A." A further portion is now filtered in the exact method for which the correction is required (time of contact and volume rejected being kept as constant as possible), and 50 c.c. is evaporated to determine "Total Soluble B." The difference between "A" and "B" is the correction sought, which must be added to the weight of the total solubles found in analysis.
An alternative method of determining correction, which is equally accurate and often more convenient, is to filter a portion of the tanning solution through the Berkefeld candle till optically clear, which can be generally accomplished by rejecting 300 or 400 c.c., and returning the remaining filtrate repeatedly; and at the same time to evaporate 50 c.c. of the clear filtrate obtained by the method for which correction is required, when the difference between the residues will be the correction sought.
An average correction must be obtained from at least five determinations. It will be found that this is approximately constant for all materials, and amounts in the case of S. and S. 605, 150 c.c. being rejected, to about 0.005 gm., and where 2 gm. of kaolin are employed in addition to 0.0075 gm. The kaolin must be previously washed with 75 c.c. of the same liquor, which is allowed to stand fifteen minutes and then poured off. Paper 605 has a special absorption for a yellow colouring matter often contained in sulphited extracts.
- Hide powder shall be of a woolly texture, thoroughly delimed,
preferably with hydrochloric acid. It shall not require more than 5 c.c. or less than 2.5 c.c. of decinormal NaOH or KOH to produce a permanent pink colour with phenolphthalein on 6.5 gm. of the dry powder suspended in water. If the acidity does not fall within these limits it must be corrected by soaking the powder before chroming for twenty minutes in ten to twelve times its weight of water, to which the requisite calculated quantity of standard alkali or acid has been added.
The hide powder must not swell in chroming to such an extent as to render difficult the necessary squeezing to 70-75 per cent. of water, and must be sufficiently free from soluble organic matter to render it possible in the ordinary washing to reduce the total solubles in a blank experiment with distilled water below 0.005 gm per 100 c.c. The powder, when sent out from the maker, shall not contain more than 12 per cent. of moisture, and shall be sent out in air-tight tins.
The detannisation shall be carried out in the following manner:--
The moisture in the air-dried powder is determined, and the quantity equal to 6.5 gm. actual dry powder is calculated, which will be practically constant if the powder be kept in an air-tight vessel. Any multiple of this quantity is taken according to the number of analyses to be made, and wet back with approximately ten times its weight of distilled water.
Two grammes per 100 of dry powder of crystallised chromic chloride, CrCl_3.6aq., is now dissolved in water and made basic with 0.6 gm. of Na_2CO_3 by the gradual addition of 11.25 c.c. of normal Na_2CO_3, thus making the salt correspond to the formula Cr_2Cl_3(OH)_3.
In laboratories where analyses are continually being made, it is more convenient to employ a 10 per cent stock solution, made by dissolving 100 gm. of Cr_2Cl_6.6aq. in a little distilled water in a litre flask and very slowly adding a solution containing 30 gm. of anhydrous sodium carbonate, with constant stirring, finally making up to the mark with distilled water and well mixing. Of this solution 20 c.c. per 100 gm., or 1.3 c.c. per 6.5 gm. of dry powder, should be used. This solution is added to the powder, and the whole churned for one hour.
At the end of the one hour the powder is squeezed in linen to free it as far as possible from the residual liquor, and washed and squeezed repeatedly with distilled water, until, on adding to 50 c.c. of the filtrate one drop of 10 per cent. K_2CrO_4 and four drops of decinormal silver nitrate, a brick-red colour appears. Four or five squeezings are usually sufficient. Such a filtrate cannot contain more than 0.001 gm. of NaCl in 50 c.c.
The powder is then squeezed to contain 70-75 per cent, of water, and the whole weighed. The quantity Q containing 6.5 gm. dry hide is thus found, weighed out, and added immediately to 100 c.c. of the unfiltered tannin infusion along with (26.5-Q) of distilled water. The whole is corked up and agitated for fifteen minutes in a rotating bottle at not less than 60 revs. per minute. It is then squeezed through linen, the fitrate stirred and filtered through a folded filter of sufficient size to hold the entire filtrate, returning till clear.
Sixty c.c. of the filtrate is then evaporated and calculated as 50 c.c., or the residue of 50 c.c. multiplied by 6/5. The non-tannin filtrate must give no turbidity with a drop of a solution of 1 per cent, gelatine and 10 per cent, common salt. [Footnote: It is convenient for technical purposes to employ the commercially obtainable chromed hide powder as prepared, for instance, by the German Experimental Station at Freiberg, Saxony.]
One gramme of kaolin, freed from all soluble matter, may be added to the filtrate, or it may be used by mixing it with the hide powder in the shaking bottle.
The analysis of used liquors and spent tans shall be made by the same methods as are employed for fresh tanning materials; the liquors being diluted, are concentrated by boiling in vacuo, or in a vessel so closed as to restrict access of air, until the tanning matter is if possible between 3.5 and 4.5 gm. per litre, but in no case beyond a concentration of 10 gm. per litre of total solids, and the weight of hide powder used shall not be varied from 6.5 gm.
The results shall be reported as shown by the direct estimation, but it is desirable that in addition efforts shall be made, by determination of acids in the original solution and in the non-tannin residue, to ascertain the amount of lactic and other non-volatile acids absorbed by the hide powder, and hence returned as "tanning matters."
In the case of tanning materials it must be clearly stated in the report whether the calculation is on the sample with moisture as received, or upon some arbitrarily assumed percentage of water; and in that of liquors whether the percentage given refers to weight or to grammes per 100 c.c., and in both cases the specific gravity shall be reported.
All analyses reported must be the average result of duplicate determinations, which must agree in the case of liquid extracts within 0.6 per cent, and of solid extracts within 1.5 per cent, or the analysis shall be repeated until such agreement is obtained.
All reports shall be marked: Analysed in accordance with the rules of the S.L.T.C. (I.A.L.T.C.)--when the analyses have been carried out according to the method described above.
As has been repeatedly emphasised in this treatise, the synthetic tannins form a special class of substances, and the results obtained by either of the two hide-powder methods do not give figures which are always comparable to those of the natural tannins. An example of the inapplicability of the methods where synthetic tannins are concerned is illustrated by the behaviour towards hide powder of them when partly neutralised to varying degrees: commercial Neradol D of acidity 1 gm.= 10 c.c.
N/10 NaOH contains 33 per cent. tanning matters, completely neutralised Neradol D, which exerts no true tanning action on pelt, still contains 20 per cent tanning matter when analysed according to the Official Method; a difference hence exists regarding the adsorption by hide powder of a tannin and the adsorption of the latter by hide. As, however, we are unable to make a distinction between these two different properties by using hide powder only, we are also unable to draw the factor into account.
Another source of error is the swelling influence on hide powder by acids; for instance, an acid extract of vegetable tannins would show higher tannin contents in the analysis than would the same extract when less acid. The free sulphonic acid, however, is the active principle in synthetic tannins, and since the latter always contain other acids (of organic and inorganic origin) devoid of tannoid character, a source of error is thus introduced, which we cannot eliminate by the present method of analysis.
Of other methods of estimating the quality of a tanning material or tanning extract the determination of solubility, ash, colour, and weight-giving properties in addition to the firmness imparted to the leather by the particular material are of importance. As regards the synthetic tannins they are as a rule very soluble and it will generally be found sufficient to subject them to the ordinary qualitative examination. The ash determination in synthetic tannins, on the other hand, is not of such value as in the case of natural tanning extracts.
From their composition we know that synthetic tannins contain considerable quantities of mineral salts, the presence of some of which on the one hand emphasises their pickling effect, and that on the other hand the property of dissolving phlobaphenes exhibited by the synthetic tannins is closely connected with their salt contents.
A colour determination of synthetic tannins is not of much importance, since synthetic tannins nearly always impart a white or light brown colour to the hide. In those cases only where coloured decomposition products appear as a result of intermediary reactions, may the former impart greyish or dirty colorations of little beauty to the hide. This is easily ascertained by lightly tanning a pelt.
The determination of the weight and solidity-giving properties is important both for leathers tanned with vegetable tanning extracts and for those treated with synthetic tannins, but the results obtained when using animalised cotton are not directly convertible into figures required for practical purposes. Comparative figures are better obtained by actually tanning pieces of pelt on as practical a scale as is possible, and testing the weights and tensile strengths of the pieces as against those of the original pelts, whereby in the former case the yield (pelt --> leather) is obtained.
Its capability as a tanning agent may be ascertained by submitting the synthetic tannin to an actual test tannage. The latter is carried out by introducing the dilute extract into open glass jars, holding about 400 c.c. at a width of about 8 cm. [Footnote: Accumulator jars are excellent for the purpose.--Transl.] The concentration of the solution is chosen according to acidity and salt contents of the synthetic tannin, the most suitable being 1.5°-2.5° Bé.
A piece of bated pelt is suspended in the liquor in such a way that the pelt is completely surrounded by liquor, without, however, being creased or touching the bottom. If the pelt were creased during tannage, the wrinkles would become fixed and would show in the finished leather. Thus an unfair judgment of the extract would be delivered, since similar results are produced by liquors which are either too concentrated or are not properly composed, and naturally this property of an extract would be greatly to its disadvantage.
The various stages of tannage may be judged from various standpoints when examining the pelt as tannage proceeds. On the one hand, the surface of the but slightly porous pelt is altered so as to present a more porous appearance, which is now rendered more capable of absorbing liquids. On the other hand, a similar alteration takes place within the pelt, to the extent to which the tanning matter has penetrated it.
How far the penetration has proceeded is easily determined by utilising the different adsorption of coal-tar dyes by untanned and tanned pelt (see p. 121). An indicator for those synthetic tannins, which are derived from the phenols, is ferric chloride, which only colours those parts of the pelt which have been penetrated by the synthetic tannins; clearer and better results are, however, obtained when the dyestuffs referred to above are employed.
As soon as the tanning matter has completely penetrated the pelt, the total time of tannage is noted, and the velocity with which the tanning matter converts the pelt into leather at that particular concentration is thus obtained. The tannage completed, the leather must be well washed in running water to remove excess of synthetic tannin and then dried. On examining the dry leathers, the colour may then be observed, and a cut will give an idea of the tensile strength and the length of fibre of the leather.
The tensile strength is, however, not of much value in such a barely tanned leather and cannot be compared with that obtained in leathers tanned on a practical scale. The length of fibre is, however, of some importance, since a special feature of finished leathers tanned with synthetic tannins is the beautifully long fibre--a property which manifests itself when the leather is torn and in which an expression of the quality of the synthetic tannin may be found.
Similarly, tanning experiments combining synthetic and natural tannins may be carried out, the most interesting features of these being the different proportions in which the two products are mixed. Such experiments may be done, for instance, by preparing 2° Bé. solutions of each extract and then mixing them in proportions of, say, 10:90, 20:80, 30:70, etc. Here it is again possible to infer the tanning intensity of the synthetic tannin from the concentration and the time used for tannage.
A further determination of the quality of a synthetic tannin is the capability of the latter of dissolving or precipitating the natural tannins. As is well known, synthetic tannins frequently possess the practically important property of rendering natural tannins easily soluble in water. In some cases, however, synthetic tannins appear to solubilise natural tannins in concentrated solutions; when, however, the latter are diluted, the natural tannin is precipitated with varying completeness, the reason of which is often the presence of excessive acid or the presence of such salts as have no phlobaphene-solubilising properties.
For practical purposes this determination may be carried out by mixing, in different proportions, concentrated tannin solutions and the synthetic tannin; heating the mixture on the water bath for a short time, cooling and finally diluting 10, 20, and 30 gm. of the mixture to 100 c.c., which are then left in measuring cylinders for twelve to twenty-four hours; the amount deposited will then be an indication of the solubilising or precipitating effect exhibited by the synthetic tannin.
Other properties of the synthetic tannins connected with their practical application will be discussed in Part II. of this treatise.
PART II
SYNTHETIC TANNINS: THEIR INDUSTRIAL PRODUCTION AND APPLICATION
With regard to their industrial production, but few synthetic tannins are, to-day, of practical and commercial interest. In addition to simplicity in the method of manufacture a certain degree of purity of the raw materials constitutes the criterion of their suitability. The methods of manufacture, of which nearly all are the property of the B.A.S.F., have been so worked out that the production of synthetic tannins presents no difficulties on a practical scale.
Cresols, naphthalenes, and higher hydrocarbons are used as starting materials in the production of synthetic tannins; the former substances or their oxidation products are sulphonated by means of concentrated sulphuric acid, and the tanning matter produced by condensing the sulphonic acids with formaldehyde. The crude synthetic tannin thus obtained has yet to be diluted and partly neutralised before it can be applied in practice, and this is carried out by mixing the crude product with strong caustic lye.
By these means the high acidity is reduced to a suitable degree learned from experience on the one hand; on the other hand, the salts of the sulphonic acids form valuable components of the commercial synthetic tannins.
The first product placed on the market was named Neradol D; this represents the condensation product of cresolsulphonic acid. The second synthetic tannin was Neradol N, which represents the condensation product of naphthalenesulphonic acid; when diluted and neutralised to the same extent as is done in the case of Neradol D, the product is named Neradol N D. The latest synthetic tannin has been called Ordoval G, the starting material of which is a still higher hydrocarbon.
The tannoid-chemical properties of these synthetic tannins have been exhaustively determined by the author, who employed Neradol D, which is most suitable for such a purpose, and the investigations relating to it will now be treated fully in the following chapters. The two other synthetic tannins exhibit very similar properties, but their few characteristics shall be shortly dealt with.
The condensation product obtained by the method described on p. 55 forms a viscous, dark coloured mass, the analysis of which by the shake method gives the following figures:-
Tanning matters 62.6 per cent.
Non tannins 6.4 " Insolubles 0.0 " Water 31.0 " --------------- 100.0 per cent.
Acidity: 1 gm. = 40 c.c. N/10 NaOH.
According to its chemical constitution, this product may be considered to be dinaphthylmethanedisulphonic acid.
Samples of this crude, strongly acid material were partly neutralised, and the following figures obtained on analysis:--
Acidity. Tanning Soluble Water.
Matters. Non-tans.
Per Cent. Per Cent. Per Cent.
1 gm. = 35 c.c. N/10 NaOH 61.8 7.0 31.2
1 " = 30 " " 58.9 7.1 34.0
1 " = 25 " " 50.1 7.9 42.0
1 " = 20 " " 42.2 8.9 48.9
1 " = 15 " " 37.4 10.4 52.2
1 " = 10 " " 31.6 13.6 54.8
1 " = 5 " " 26.3 16.6 57.1
Experimental tanning tests which were carried out with the various partly neutralised samples yielded leathers which, on an average, were nearly white, but which in comparison with a leather tanned with Neradol D appeared rather more greyish and were much harder.
A solution of the half-neutralised substance (1gm. = 20 c.c.
N/10 NaOH) gives the following reactions:---
Gelatine--Precipitate, partly soluble in excess tannin solution.
Ferric chloride-----No coloration.
Barium chloride-----Precipitate, insoluble HNO_3.
Bromine water-----No reaction.
Silver nitrate-----No reaction.
Aniline hydrochloride----Precipitate, dissolves when solution is heated.
This condensation product is very soluble in water, but insoluble in most solvents, excepting methyl and ethyl alcohols. The above reactions show the similarity of this dinaphthyl derivative to the dicresyl derivative, and the absence in the former of characteristic reactions with iron salts is mainly accounted for by its lack of phenolic groups.
The absence of this reaction does not, of course, influence the tannoid character of dinaphthylmethanedisulphonic acid in the least, and is of no importance in practice, since the various stages of tannage may be demonstrated by means of a solution of indigotine.
From a technical point of view the absence of this reaction is advantageous to this extent, that it eliminates the exceedingly great care to avoid the contact of tan liquors and tanned pelt with iron particles which has to be observed when tannins of phenolic character are employed.
In a chemical and technological evaluation of this tanning matter, all those details apply which will be described when discussing Neradol D. The most important advantage possessed by this tanning matter, from a commercial point of
view, is the lower price which it owes to the greater ease with which naphthalene may be obtained.
By treating the non-condensed crude product with barium chloride, a product completely devoid of sulphuric acid is easily obtained; the contents of sulphuric acid calculated as BaSO_4 is about 9.5 per cent. This value is higher than that found by Neradol D, and may be explained by the fact that a slight excess of sulphuric acid is necessary for the preparation of [Greek: b]-naphthalenesulphonic acid.
Comparative tanning tests using products containing sulphuric acid and products free from sulphuric acid (neutralised to the same degree of acidity) yielded leathers which were very similar; the liquor containing no sulphates yielded slightly softer leather than that obtained from a liquor containing sulphates.
An experiment was also carried out, using a liquor containing the tannin completely neutralised with caustic soda and subsequently acidified with acetic acid till the acidity of 1 gm. = 10 c.c N/10 NaOH; here, again, no essential difference could be detected in the leather as compared with that from a liquor containing sulphates.
One of the most striking properties of this tanning matter is its solubilising effect on natural tannins and the phlobaphenes; this property may mainly be compared to the similar one of other condensed sulphonic acids in their behaviour towards natural tannins.
If, therefore, natural tannins are mixed with this product and the solution used for tanning purposes, the resultant leather will possess a dark colour owing to the presence of solubilised phlobaphenes; if, on the other hand, a dark coloured leather, which has been tanned with natural tannins, is washed over with a 5° Bé solution of this synthetic tannin, or immersed for some time in the solution, the leather assumes a lighter colour owing to the phlobaphenes being dissolved and removed from the leather by the synthetic tannin.
The presence of Neradol ND in leathers is detected by methods to be described under Neradol D (cf. p. 108). The oxyazo reaction only succeeds when the solution has been boiled with a few drops of hypochlorite solution, quickly cooled and excess of ammonia added. When applying the indophenol reaction, the solution must be treated as follows: 3-4 drops of hypochlorite solution is added, and the solution heated for a short time; or 5-6 drops hypochlorite solution may be added, and the solution left for some time, in which case the heating may be omitted.
The solution is then made distinctly ammoniacal, 1-2 drops of dimethyl-p-phenylenediamine solution and a layer of alcohol poured on the top. In most cases a blue coloration will appear; the addition of 1-2 drops of potassium ferricyanide solution with formation of a blue coloration indicates the presence of Neradol ND without fail.
The fact that a product possessing tanning properties may be obtained by condensing [Greek: b]-naphthalenesulphonic acid makes it interesting to investigate the behaviour of a non-condensed [Greek: b]-naphthalenesulphonic acid towards pelt. The following solutions were allowed to act upon pelt for twelve days:--
(1) Concentrated solution of [Greek: a]-naphthalenesulphonic acid (10° Bé). (2) " " [Greek: b]- " " (6° Be.) (3) " " 2,7- " " (18° Bé.).
Solution 1 swells the pelt to a considerable extent without, however, solubilising it. Solution 2 produces a similar effect. Solution 3 dissolves the pelt appreciably on the first day; after six days, solubilisation is complete. The reason of this different behaviour of the mono- and disulphonic acids is mainly to be sought in their difference of solubility; the monosulphonic acids are not very soluble, and are only capable of giving solutions measuring 10° and 6° Bé, respectively, whereas the disulphonic acid yields an 18° Bé solution, in addition to which the much higher acidity of the latter quickly gelatinises the pelt.
As regards the capability of the naphthalenesulphonic acids of dissolving phlobaphenes, the following results were obtained:--solid Argentine quebracho extract was mixed with--
5 percent, [Greek: a]-naphthalenesulphonic acid: opaque sol.,
large quantity of insolubles.
10 " " " lesser " "
20 " " " no insolubles.
30 " " " "
5 " [Greek: b]-naphthalenesulphonic acid: opaque sol.,
lesser quantity of insolubles.
10 " " " "
20 " " " clear solution, no insolubles
30 " " " "
5 " 2,7-naphthalenedisulphonic acid: opaque sol.,
large quantity of insolubles.
10 " 2,7 " " as above.
20 " 2,7 " " slightly opaque, some insolubles.
30 " 2,7 " " nearly clear solution, no insolubles.
It is hence clear that the [Greek: b]-sulphonic acid possesses phlobaphene-solubilising qualities greater than those of the [Greek: a]-sulphonic acid or the disulphonic acid; the Greek: b]-sulphonic acid was therefore made the subject of Ger. Pat., 181,288 (8th February 1917).
The synthetic tannin, Ordoval G, is the formaldehyde condensation product of higher hydrocarbons (mainly retenes), and is a partly neutralised product containing no sulphuric acid. The author's analysis gave the following figures:--
Tanning matters 10.7 per cent.
Soluble non-tannins 16.4 "
Insolubles 0.0 "
Water 73.0 "
Acidity: 1 gm. = 4 c.c. N/10 NaOH.
Density: 23° Be.
Ordoval G is completely soluble in water and glacial acetic acid. Only its organic constituents are soluble in alcohol, ethyl acetate, and acetone, whereby a dark coloured crystalline mass separates. Ordoval G is insoluble in benzene.
The aqueous solution of Ordoval G gives the following reactions:--
Gelatine Moderate flocculent precipitate.
Ferric chloride Darkish coloration.
Potassium dichromate No reaction.
Aniline hydrochloride Dark brown precipitate.
Formaldehyde hydrochloric acid No precipitate.
Bromine water No reaction.
Zinc acetate Very slight opalescence.
Barium chloride Slight opalescence.
Its capability of solubilising and consequent saving of natural tannins is shown by the fact that 100 kilos of vegetable tanning material may be substituted by 40 kilos of Ordoval G and the material in question in order to obtain the entire tanning intensity of the latter.
In one respect--that of its salts--Ordoval G differs from the Neradols; whereas the chromium and aluminium salts of the latter possess no such tannoid properties as will make the resultant leather exhibit any of the characteristics of either tannage, it is possible to carry out combined tannage with a mixture of Ordoval G and metallic salts. Tanning experiments carried out with the chromium, iron, aluminium, and calcium salts of Ordoval G yielded leathers which possessed proportionate characteristics of either kind of tannage to the extent to which either material was present.
This combination tannage seems to be assured of a great future; especially may a combination tannage of iron salts and Ordoval G eventually entirely replace chrome tannage.
The detection of Ordoval G in leather is carried out as follows: 10 gm. of leather are boiled with 150 c.c. of acetic acid, a solution of 25 gm. of CrO_8 in 25 c.c. of a 50 per cent, solution of acetic acid gradually added, and the mixture boiled for three hours, till the leather is decomposed and the solution has assumed a brown instead of the original light yellow colour. The solution is then evaporated, the residue dissolved in 600 c.c. hot water, and the chromium precipitated with a 40° Bé. solution of caustic soda.
The solution is filtered and cooled, and a little hydrosulphite is added to 20 c.c. of the cold alkaline filtrate; in the presence of Ordoval G, a red colour will appear (oxanthranolsulphonic acid).
Brief mention must be made of the so-called Corinal [Footnote: Swiss Pat, 78,282, 78,797, 79,39.] a synthetic tannin placed upon the market by Chem. Fabrik Worms A.-G., in Worms-on-the-Rhine. It is a viscous, brown fluid, containing the aluminium salts of the tannoid acids. The latter are formaldehyde-condensation products of sulphonated tar oils, or the hydroxylated derivatives of the latter. The density being 33° Bé, it contains 28.1 per cent. tanning matters, 13 per cent. soluble non-tannins, and 10.8 per cent. inorganic matter (3.2 per cent. Al_2O_3 and 7.6 per cent. Na_2SO_4.
A similar product, containing chrome salts as base, is the so-called ESCO-EXTRACT, [Footnote: Schorlemmer, Collegium, 1917, 124] manufactured by the Chem. Fabrik Jucker & Co. in Haltingen (Baden). This product is a dark, reddish-brown fluid, possessing acid reaction, which strongly precipitates gelatine. Analysed by the filter method it contains 12-15 per cent. tanning matters, 17-20 per cent. soluble non-tannins, and 18 per cent. ash, of which 3 per cent. is Cr2O_3. This synthetic tannin may be employed alone or in conjunction with other tannins, and yields a leather similar to that obtained by chrome tannage.
A. Condensation of Free Phenolsulphonic Acid
In practice, the results of condensing phenolsulphonic acid with formaldehyde are manifold, according to whether these materials are used in their concentrated or dilute state; whether they interact in the cold or when heated; or whether their interaction is gradual or rapid.
- If a moderately dilute solution of phenolsulphonic acid (1:1) is
mixed with one-sixth of its volume of a dilute formaldehyde solution (1 part 30 per cent. HCHO solution plus 3 parts of water) in the cold, with continuous stirring, the solution remains clear and assumes a brown colour. When left several hours, a light, white flocculent precipitate deposits, which increases in quantity on diluting with water. The solution precipitates gelatine; the flocculent precipitate is easily soluble in hot caustic soda solution, and, when subsequently neutralised with acetic acid, precipitates gelatine.
If equal parts of dilute phenolsulphonic acid and dilute formaldehyde (concentrations as above) are gradually mixed in the cold, whilst stirring, the mixture soon becomes opalescent, and a flocculent deposit separates after eighteen to twenty-four hours.
These experiments carried out on the water bath immediately yield opalescent liquids, from which an insoluble, brown, gluey, and very sticky mass separates after twenty-four hours; the latter is sparingly soluble in alkalies, partly so in organic solvents.
- If a moderately dilute solution of phenolsulphonic acid (1:1) is
gradually mixed with one-sixth of its volume of a concentrated (30 per cent.) formaldehyde solution in the cold, whilst stirring, slight opalescence immediately results, and a flocculent deposit separates after about twenty minutes, which gradually increases in quantity during the next few hours. If the volume of formaldehyde is increased to the same as that of phenolsulphonic acid solution, the flocculent deposit immediately separates, and after twenty-four hours a brown, gluey, and very sticky mass--of the same solubility as that described in the previous experiment--is to be found at the bottom of the vessel used.
It should be noted that in both these experiments with concentrated formaldehyde solution a slight increase in temperature occurs concurrently with the process of condensation. If the experiments are carried out on the water bath, a gelatinous mass is instantly formed, which assumes the colours of grey, dirty light violet and dark violet, in the order named, and which, whilst left several hours--or when heated on the water bath--is suddenly converted into the insoluble, brown, gluey mass above referred to.
- If, for the purpose of condensation, phenolsulphonic acid to which 10
per cent, of water has been added, is employed, the reaction proceeds very quickly and energetically. If one-sixth of its volume of formaldehyde (1:3 of the 30 per cent. solution) is added drop by drop to a cold solution of phenolsulphonic acid, a reddish, milky solution results, which assumes a slightly lighter colour on addition of more formaldehyde and deposits an insoluble flocculent precipitate.
If the solution is kept below 45° C., by artificial cooling, the light colour is maintained, but a gelatinous precipitate is soon formed, the viscosity of which increases on stirring, and finally is converted into an insoluble, tough, gummy mass.
If, on the other hand, the mass is heated at the beginning of the reaction, or if the amount of formaldehyde is increased and the mass cooled during reaction, effervescence occurs, and a cheesy, dirty-coloured mass results, which, on cooling, rapidly becomes solid and yields a very firm, elastic, rubbery mass, which is absolutely insoluble in water.
- The condensation proceeds exceedingly violently when concentrated
phenolsulphonic acid is acted upon by one-sixth of its volume of formaldehyde. If the latter is firstly added drop by drop to the phenolsulphonic acid, a gel immediately results, the temperature of which quickly increases on further addition of formaldehyde and suddenly boils over, yielding a reaction product which, when cooled, forms a dirty violet, firm, elastic, and rubbery mass, insoluble in alkalies and hardly affected by organic solvents.
Finally, if the amounts of concentrated phenolsulphonic acid and formaldehyde stated above are mixed, strong effervescence occurs and heat is evolved, and a dirty blackish-violet mass is instantly formed which, on cooling, yields a rather brittle, hard product insoluble in water.
- Totally different end-products are, however, obtained when the
addition of formaldehyde (30 per cent.) in the proportion of one-sixth of the volume of dilute phenolsulphonic acid (1 plus 9 aq.) to the latter is extended over several hours. In this case a slightly opalescent liquid is obtained which, when left twelve hours, is transformed into a brown mass soluble in water, which strongly precipitates gelatine and possesses tanning properties. Hence direct tannoid substances are obtained by this method of condensation.
Whereas no direct tanning experiment can be carried out with the insoluble compact mass obtained in the preparations described above on account of their absolute insolubility, it is still possible to carry out tanning experiments with opalescent colloidal solutions in the following ways:--
(a) If a bated pelt is immersed in a liquid containing a condensation product obtained by gradually mixing a moderately dilute solution of phenolsulphonic acid and a dilute solution of formaldehyde, the pelt is rapidly tanned on the surface. Complete penetration of the substance does not occur even after several days, since the strong acidity of the solution causes a strong swelling of the pelt.
(b) If a pelt is shaken for six hours in a shaking apparatus containing the liquid mentioned under (a), tannage again only takes place on the surface, penetration being impeded by the strong swelling effect of the liquid. Repetition of the latter two experiments, with the addition of 15 per cent, common salt, increases the tanning effect to some extent; the pelt, however, is not tanned through, but the non-tanned layers may be clearly seen to be pickled.
The tanning effects described above are only exhibited when the colloidal tan-liquor is present in great excess over the pelt, since the former obviously only contains small amounts of tanning matter, and even the presence of common salt does not bring about complete tannage of the pelt.
In order to prove the presence of "tanning matters" in the liquid described above, several freshly prepared samples of the latter were analysed by the shake method of analysis without being first filtered and the following figures obtained:--
- 2. 3. 4.
Per Cent. Per Cent. Per Cent. Per Cent.
Tanning matters 6.4 7.7 8.2 9.1
Soluble non-tannins 15.2 17.4 14.5 11.8
These condensation products suspended in water all precipitate gelatine strongly and leave behind a perfectly clear liquid. In all cases, an intense blue colour was obtained on adding ferric chloride, a slight precipitate only was obtained with aniline hydrochloride, and bromine was rapidly absorbed with the separation of an insoluble white deposit.
The condensation products obtained by the interaction of dilute solutions of phenolsulphonic acid and formaldehyde at moderately high temperature, which form slimy masses and are insoluble in water, are soluble in alcohol. An alcoholic solution of such a product was used in a tanning experiment, and a piece of pelt immersed in the solution was tanned through in a few days; the resultant leather being rather firm, springy, and slightly hard, and the colour was a light brownish-grey.
All those condensation products which are easily or partly soluble in alcohol dissolve in caustic soda, sodium carbonate, in some cases also in borax and sodium sulphite. They are rendered soluble with greater ease when the freshly prepared solution is heated on the water bath with the alkali; the alkaline solution, neutralised as far as is possible with acetic acid, yields light brown coloured solutions, the tanning effects of which have proved very satisfactory. Leathers tanned in such solutions, however, are rather empty and hard, possess but little resilience and an uneven, dirty greyish-brown colour.
A sample of such a product, as nearly as possible neutralised with acetic acid, contained 14.8 per cent. tanning matters, by the shake method of analysis.
B. Condensation of Partly Neutralised Phenolsulphonic Acid
Attempts were made at condensing partly neutralised phenolsulphonic acid; the latter was obtained by mixing equal quantities of phenolsulphonic acid and sodium phenolsulphonate (prepared by exactly neutralising phenolsulphonic acid with a concentrated solution of caustic soda).
The consequent dilution and decrease in acidity, however, considerably diminished the velocity of the reaction. Hence, if the half-neutralised Solution A1 (cf. p. 98) is diluted with water, taking equal volumes, and one-sixth of the volume of dilute formaldehyde (1:3) gradually added in the cold, condensation is not induced. When heated several hours an opalescent liquid results from which, however, no flocculent deposits separate when left for some time. Using a concentrated solution of formaldehyde (Experiment A2, p. 98) in the cold produces no reaction, but after heating for a time an opalescent liquid is obtained. Both liquids give only slight precipitates with gelatine.
Excess formaldehyde does not influence the reaction.
A repetition of Experiment A3 (cf. p. 99), using the above half-neutralised phenolsulphonic acid, similarly required heat to induce condensation, when a milky liquid of light reddish colour resulted.
Whereas the addition of formaldehyde to non-neutralised concentrated phenolsulphonic acid caused violent reaction, this proceeded very slowly in the case of half-neutralised phenolsulphonic acid, resulting in the formation of a semi-solid mass, which on heating became more viscous, and finally, when left twenty-four hours, became a solid, compact, insoluble mass possessing a dirty light violet colour.
Tanning experiments with these opalescent solutions proved them to exert a rapid penetration on the surface, complete tannage, however, taking place after eight days only, when a flat, greyish-coloured and rather hard leather resulted.
C. Condensation of Completely Neutralised Phenolsulphonic Acid
If concentrated phenolsulphonic acid is gradually neutralised with concentrated caustic soda solution till the former is faintly alkaline, the sodium salt thus obtained is not so easily condensed with formaldehyde as is the case with the free acid.
- If formaldehyde is gradually added to the neutralised phenolsulphonic
acid in the cold, opalescence immediately results; on addition of water, the liquid assumes a milky appearance. On adding gelatine to this liquid, a slimy precipitate is thrown down, leaving a slightly opalescent liquid.
- If formaldehyde is added to neutralised phenolsulphonic acid whilst
it is heated on the water bath, a slimy mass instantly separates, which on cooling solidifies and forms a greyish-blue brittle mass, insoluble in water and but sparingly soluble in alcohol; the alcoholic solution is capable of converting pelt into leather.
The filtrate from the solidified mass strongly precipitates gelatine, whereas the insoluble condensation product is soluble in caustic soda; this alkaline solution also precipitates gelatine and the addition of acetic acid transforms the mixture into the gel state.
If the insoluble condensation product is dissolved in warm concentrated sulphuric acid, the solution remains clear upon the addition of water, but does not precipitate gelatine. If, finally, this solution is neutralised with caustic soda, the solution remains clear and precipitates gelatine strongly.
D. Condensation of Cresolsulphonic Acid
Experiments were carried out with the object of condensing o-, m-, and p-cresolsulphon
Edition notice Project Gutenberg source, credits & licence
The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.
Transcriber and production notes
Produced by Juliet Sutherland, Thomas Hutchinson, Charles Franks and the Online Distributed Proofreading Team.
Front matter as received (title page, contents)
SYNTHETIC TANNINS THEIR SYNTHESIS, INDUSTRIAL PRODUCTION AND APPLICATION by Georg Crasser, Dr. Phil., Ing. Lecturer in Tanning Chemistry at the German Technical College, Brunn
Header as received
The Project Gutenberg eBook of Synthetic Tannins, Their Synthesis, Industrial Production and Application
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.
Title: Synthetic Tannins, Their Synthesis, Industrial Production and Application
Author: Georg Grasser
Translator: Fini Georges Alexander Enna
Release date: April 1, 2005 [eBook #7981]
Most recently updated: December 31, 2020
Language: English
Other information and formats: www.gutenberg.org/ebooks/7981
Credits: Produced by Juliet Sutherland, Thomas Hutchinson, Charles Franks and the Online Distributed Proofreading TeamFull Project Gutenberg licence
Updated editions will replace the previous one—the old editions will
be renamed.
Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for an eBook, except by following
the terms of the trademark license, including paying royalties for use
of the Project Gutenberg trademark. If you do not charge anything for
copies of this eBook, complying with the trademark license is very
easy. You may use this eBook for nearly any purpose such as creation
of derivative works, reports, performances and research. Project
Gutenberg eBooks may be modified and printed and given away—you may
do practically ANYTHING in the United States with eBooks not protected
by U.S. copyright law. Redistribution is subject to the trademark
license, especially commercial redistribution.
START: FULL LICENSE
THE FULL PROJECT GUTENBERG™ LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg™ mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase “Project
Gutenberg”), you agree to comply with all the terms of the Full
Project Gutenberg License available with this file or online at
www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project Gutenberg
electronic works
1.A. By reading or using any part of this Project Gutenberg
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the person
or entity to whom you paid the fee as set forth in paragraph 1.E.8.
1.B. “Project Gutenberg” is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg
electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation (“the
Foundation” or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg mission of promoting
free access to electronic works by freely sharing Project Gutenberg
works in compliance with the terms of this agreement for keeping the
Project Gutenberg name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg License when
you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg work. The Foundation makes no
representations concerning the copyright status of any work in any
country other than the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg License must appear
prominently whenever any copy of a Project Gutenberg work (any work
on which the phrase “Project Gutenberg” appears, or with which the
phrase “Project Gutenberg” is associated) is accessed, displayed,
performed, viewed, copied or distributed:
This eBook is for the use of anyone anywhere in the United States and most
other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg™ License included with this eBook or online
at www.gutenberg.org. If you
are not located in the United States, you will have to check the laws
of the country where you are located before using this eBook.
1.E.2. If an individual Project Gutenberg electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase “Project
Gutenberg” associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg
trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg License for all works
posted with the permission of the copyright holder found at the
beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg.
1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg License.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg work in a format
other than “Plain Vanilla ASCII” or other format used in the official
version posted on the official Project Gutenberg website
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original “Plain
Vanilla ASCII” or other form. Any alternate format must include the
full Project Gutenberg License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg works
unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg electronic works
provided that:
• You pay a royalty fee of 20% of the gross profits you derive from
the use of Project Gutenberg works calculated using the method
you already use to calculate your applicable taxes. The fee is owed
to the owner of the Project Gutenberg trademark, but he has
agreed to donate royalties under this paragraph to the Project
Gutenberg Literary Archive Foundation. Royalty payments must be paid
within 60 days following each date on which you prepare (or are
legally required to prepare) your periodic tax returns. Royalty
payments should be clearly marked as such and sent to the Project
Gutenberg Literary Archive Foundation at the address specified in
Section 4, “Information about donations to the Project Gutenberg
Literary Archive Foundation.”
• You provide a full refund of any money paid by a user who notifies
you in writing (or by e-mail) within 30 days of receipt that s/he
does not agree to the terms of the full Project Gutenberg™
License. You must require such a user to return or destroy all
copies of the works possessed in a physical medium and discontinue
all use of and all access to other copies of Project Gutenberg™
works.
• You provide, in accordance with paragraph 1.F.3, a full refund of
any money paid for a work or a replacement copy, if a defect in the
electronic work is discovered and reported to you within 90 days of
receipt of the work.
• You comply with all other terms of this agreement for free
distribution of Project Gutenberg™ works.
1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg™ electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from the Project Gutenberg Literary Archive Foundation, the manager of
the Project Gutenberg™ trademark. Contact the Foundation as set
forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg™ collection. Despite these efforts, Project Gutenberg™
electronic works, and the medium on which they may be stored, may
contain “Defects,” such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
of Replacement or Refund” described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg™ trademark, and any other party distributing a Project
Gutenberg™ electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg™ electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg™
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg work, and (c) any
Defect you cause.
Section 2. Information about the Mission of Project Gutenberg
Project Gutenberg is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.
Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg’s
goals and ensuring that the Project Gutenberg collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non-profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation’s EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state’s laws.
The Foundation’s business office is located at 41 Watchung Plaza #516,
Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
to date contact information can be found at the Foundation’s website
and official page at www.gutenberg.org/contact
Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation
Project Gutenberg™ depends upon and cannot survive without widespread
public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine-readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.
The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular state
visit www.gutenberg.org/donate.
While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.
International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate.
Section 5. General Information About Project Gutenberg electronic works
Professor Michael S. Hart was the originator of the Project
Gutenberg concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg eBooks with only a loose network of
volunteer support.
Project Gutenberg eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.
Most people start at our website which has the main PG search
facility: www.gutenberg.org.
This website includes information about Project Gutenberg,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.Source: Project Gutenberg ebook #7981. Public-domain status is recorded per item; the licence text above is reproduced unchanged.