Gutenberg · e01.org
Cover of Toy-Making in School and Home
Project Gutenberg cover, or a typographic cover where none is held.

Gutenberg · ebook 45775

Toy-Making in School and Home

by R. K. Polkinghorne · English · public domain in the US

  • Language English
  • PG edition 2014
  • Rights public domain (US)
  • Source Project Gutenberg
0%

Contents

    Toy-Making in School and Home by R. K. Polkinghorne is an English public-domain text held from Project Gutenberg (ebook #45775). Note: Project Gutenberg also has an HTML version of this file which includes the original illustrations. See 45775-h.htm or 45775-h.zip: (https://www.gutenberg.org/cache/epub/45775/pg45775-images.html) (https://www.gutenberg.org/files/45775/45775-h.zip)

    Prefatory Note

    The authors wish to express their thanks to Mr J. E. Mansion for many valuable criticisms and suggestions, and to Miss Bassett, whose encouragement and support alone made the work possible.

    Contents

    PAGE

    INTRODUCTION. By Miss R. BASSETT, B.A.,

    Headmistress of the County Secondary School, Streatham 9

    PART I

    TOYS FOR LITTLE ONES: PAPER AND

    CARDBOARD

    CHAPTER

    I. TOY-MAKING AND ITS EDUCATIONAL POSSIBILITIES 21

    II. GENERAL PRINCIPLES; MATERIALS 26

    III. PAPER WORK FOR INFANTS 31

    IV. MORE PAPER TOYS 43

    V. MATCH-BOX TOYS 53

    VI. MORE COMPLICATED MATCH-BOX AND CORK TOYS 64

    VII. CORK ANIMALS HARNESSED TO SLEDGES, ETC. 72

    VIII. MORE CORK TOYS 80

    IX. CARDBOARD AND PAPER SHIPS 86

    X. CARDBOARD AND PAPER TOYS 91

    XI. SIMPLE WOODWORK 98

    XII. MATERIALS 102

    XIII. SOME DIFFICULTIES IN TOY-MAKING 105

    XIV. MERRY-GO-ROUND, SWINGING BOATS, AND GREAT WHEEL 109

    XV. FLYING AIRSHIPS, GONDOLAS, AND BIRDS 113

    XVI. FIRE-ENGINE, MOTOR-LORRY, AND STEAM-ROLLER 119

    XVII. GIPSY CARAVAN AND BATHING MACHINE 123

    XVIII. A TRAIN AND RAILWAY STATION 125

    XIX. RED CROSS MOTOR AND TAXI-CAB 131

    XX. SWINGING AND JOINTED ANIMALS 136

    PART II

    TOYS OF CARDBOARD AND WOOD:
    MECHANICAL TOYS

    CHAPTER PAGE

    I. ADDITIONAL TOOLS 145

    II. CAPSTAN, DREADNOUGHT, LINER 148

    III. MOTOR-CAR, SWINGING CRADLE, DECK-CHAIR 152

    IV. A TRAM-CAR 155

    V. A CRANE 159

    VI. WINDMILL, WATER-WHEEL, WELL 161

    VII. DRAWBRIDGE AND SIEGE TOWER 168

    VIII. WAR ENGINES PAST AND PRESENT 171

    IX. A FIRE-ESCAPE 181

    X. CASTLE, TOURNAMENT, AND FAIR 184

    XI. AN OLD CHARIOT AND SOME QUAINT DOLLS' FURNITURE 190

    XII. RAILWAY SIGNAL AND SIGNAL-BOX 195

    XIII. LIGHTHOUSE, TRANSPORTER BRIDGE 199

    XIV. YACHTS AND BOATS: THE USE OF THE CHISEL 203

    XV. THE FRET-SAW 209

    XVI. LITTLE GYMNAST, DANCING CLOWN, ROCKING ANIMALS 212

    XVII. MOVING FIGURES 218

    XVIII. SOME OLD-FASHIONED TOYS 221

    XIX. LITTLE SWORDSMEN 225

    XX. SOME MORE FRET-SAW TOYS 229

    XXI. TOYS WORKED BY SAND 235

    XXII. TOYS WORKED BY WHEELS, ETC. 243

    XXIII. KITES, GLIDERS, AND AEROPLANES 249

    XXIV. MORE OLD-FASHIONED TOYS 260

    XXV. LIFT, PONT ROULANT, TOWER BRIDGE 267

    XXVI. SOLDERING. SCREW STEAMER. TOYS WORKED BY

    WIND AND BY CONVECTION CURRENTS 278

    XXVII. BUILDINGS AT HOME AND ABROAD 286

    XXVIII. A THEATRE 295

    Introduction

    By R. Bassett, B.A.

    HEADMISTRESS, COUNTY SECONDARY SCHOOL, STREATHAM

    I. EXTERNAL EVIDENCE

    Women are often limited in their amusements and in their hobbies for lack of power or of knowledge to use the requisite implements. We may wield the needle, the brush, kitchen utensils, even the spade and the trowel, but what knowledge have we of the chisel, the plane, the saw, or even the friendly gimlet and the screw-driver?

    The scissors answer many purposes until the points are broken, but how helpless we are with a screw or a saw, how futile are our attempts to adjust a loose door-handle, or to set the knives of a mowing machine! It is humiliating to call for help in such simple jobs, and tantalising not to be able to enjoy the carpenter's bench as our men-folk do in their hours of leisure.

    A really active hobby, one entailing exercise of many muscles, otherwise resting, does help to keep a well-balanced mind and a healthy body. It saves one from fretfulness, from too great introspection; it keeps one cheerful and changes one's attitude of mind when change is needed.

    It is possible that the management of big things falls into men's hands because from babyhood they have dealt with larger things than women, and through handling manageable things from an early age have developed the constructive faculty more thoroughly. The little girl deals with 'wee' things: stitches are small, dolls are small; there is a fatal tendency sometimes to 'niggle,' to 'finick'--not that men-folk are immune from this--to love uniformity and tidiness for their own sakes, to seek regularity rather than utility.

    The little girl, however, must, unless she is too thoroughly supervised, exercise some ingenuity in planning a doll's dress out of a cutting from the rag-bag; but her amusements and hobbies tend to pin her down to small things, and she does not rise far enough from her immediate surroundings. The dress of her little doll will follow the prevailing fashion. Originality in dress is eccentricity.

    The girl takes pains to carry out her work (neatness is often the sole aim put before her), the boy finds methods. The girl hovers round the well-known place, the boy makes a bee-line to fresh fields. See how this affects reading: the girl still hankers after What Katy Did, What Katy Did Next, while the boy of her age is reading Jules Verne or Ballantyne or Henty, or if there is open access to shelves in the Free Library near him, you see him finding books on Airships, Submarines, Carpentry, or Engineering.

    We started our voluntary classes with these ideas in mind, and at first allowed girls to choose an indoor occupation in the two winter terms instead of outdoor games. Many girls preferred games, but others chose Art or First Aid or Cookery or Handwork or Needlework. They had to work at least a term at the chosen occupation. We felt that the girls gained great benefit from the hobbies, not only in the additional happiness of working at what they enjoyed, but in an increase of freshness of mind for other work.

    This year we have gone still farther and have given each girl one period of voluntary work in addition to a whole afternoon for games or gardening; moreover, the four lowest forms have each one period of class work in toy-making; yet even now the children say that the time is too short. It is really amusing to see a change of classes in the woodwork-room; the first class dare not and cannot stay a minute after the bell has rung, for the second class is in and already at work.

    I have tried to find out what is the great attraction to the child in the handwork lessons; the children's appreciation of the subject will be found in Section II. Probably the strongest attractions are: firstly, they see the building up of a piece of work and the result pleases them (at all events, until they do something better); secondly, they are actively employed, learning by doing, not learning by listening; and, lastly, they love the cheerful noise of the hammer and the saw and friendly conversation.

    It is hard to estimate the value of handwork in education, for one cannot separate the influence of one subject in the curriculum, but one is tempted to say that it has a beneficial effect upon the child's attitude toward work in general; she looks into the why and wherefore of an object in order to see how it is made; unconsciously she adopts the same attitude toward things abstract. She learns to appreciate accuracy and to detect error, but how far she applies this to subjects other than handwork it is hard to say. It is possible, also, that handwork helps to develop the sense of justice.

    Certainly the girl who has had a course in handwork does take a more intelligent interest in things around her, and does find out a way of 'setting about' a piece of work by herself. She has something pleasant and profitable to think about; she becomes more businesslike; in the lesson itself she resents interruption (this was the case when the photographer came for illustrations for this book); more strangely still, she plays no tricks with glue-pot or tools, although she has innumerable opportunities for mischief. The joy over the finished article is greater than the spirit of mischief.

    She realises how short the time is when there is work to be done, and looks out for devices for saving time, putting tools in handy places, saving pieces of wood of useful sizes to avoid sawing, and so on.

    There is a spirit of earnest endeavour abroad in the handwork class which prevents a girl from throwing aside in a pet something she has done badly; she does not give up in disgust; she finds out the cause of the failure and tries again and again until she gets better results. It is no unusual thing to find a girl return to a job that, five or six weeks before, she had thought finished, and do it again, because her progress with other articles has made her dissatisfied with her previous standard. This comes, not from suggestion from outside, but from the development of the child's own judgement. These are the things which show what is the real value of this training.

    II. INTERNAL EVIDENCE

    In order to find from internal evidence the educational value of toy-making, the following questions were put to the two lowest classes (ages ten to eleven). The girls were told to write frankly what they really thought, not what they thought might satisfy the mistress.

    To the question, "If you like handwork, say why; if not, say why you do not," out of forty-five papers one answer only was against handwork--"Because I do not like sawing." The answers in favour were of this type:

    "Because we can make what we like."

    "Because I like sawing and hammering."

    "Because it is nice to see the things when they are finished."

    "Because you can make interesting things."

    "Because it is interesting making things out of wood like
    boys."

    "Because I make useful things."

    The favourite tools were the hammer and saw. There was considerable difference of opinion on the question, "Has it done you any good?" A fair number think it has made them careful or patient or more useful; others seem to think that the exercise in sawing has some good effect on the arms; one says her "fingers are better for music." Others see in handwork a pleasant occupation for future grown-up days; another thinks it has made her "not so flabby and fat."

    If they admit that it has cured them of any faults (and they are not very ready to do this), the chief are laziness, clumsiness, and carelessness. To the last question, "Will it be of any use to you when you are grown up?" the majority look forward to the joy of mending their little girls' toys. (Not one mentions a little boy; is he expected to mend his own?) Others will make things instead of buying them ready-made. Some look forward to mending broken chairs or door-handles.

    One says: "It will teach me to earn my fortune," and finally one writes philosophically: "Ordepents." (No! handwork does not cure bad spelling.)

    The girls of the next highest forms (ages eleven to twelve) were given the questionnaire as suggestions and were asked to write an essay on handwork. From them we get the 'home' point of view, the views of the mother, father, sceptical brothers, and of the younger children, who appear to clamour for the toys.

    [Illustration: PLATE II A TOY-MAKING CLASS AT STREATHAM]

    "Handwork is my favourite lesson next to Botany. It is a
    delightful pastime for myself and a great amusement for my little
    brother when it is finished. 'Have you finished the swing yet?' is
    the usual question which greets me every Thursday evening. When I
    am able to do handwork extra nicely I shall do a very nice piece
    of work and keep it as long as I can, and when I get old it will
    remind me of youth."

    "My brother tries to make some of the things I bring home. My
    sister likes the swing and uses it for her dolls."

    "It is a source of enjoyment to most children, but until I
    entered this school I had never heard of girls being taught it. I
    enjoy this so much that I hope to buy some tools and wood and do
    some work at home. My three brothers tease me terribly and call me
    the 'left-handed carpenter,' because I always work with my left
    hand. I am not satisfied with the handwork I have done at present,
    but hope greatly to improve. I enjoy making useful things because
    they make very useful presents at all times. I should like to teach
    handwork to others, as I think it so interesting.

    I have discovered
    that handwork needs patience and neatness in every way."

    "I have learnt that everything must be done properly, because
    I made a motor-car and gave it to my little sister, but she
    happened to drop it and it came unstuck. My little brother thinks
    it's silly for girls to learn handwork, and everything I bring
    home he says, 'I should not have done it like that,' and goes on
    to explain how he would have done it, although he has never learnt
    himself. I don't like the part much where you have to prepare
    everything to put together. I like putting it together and then you
    can see something for your work."

    Some show the ethical value of the training; the need of patience seems to appeal most forcibly to children who are making their first attempts at handwork.

    "To make toys and other wooden things teaches us to be
    patient, for often just at a critical moment something will come
    unstuck and we have to begin all over again. The top of the
    roundabout which I am now making has come off three or four times,
    and consequently it has taken me about twice as long to make as it
    would if all had gone smoothly."

    "Sometimes you have to wait for a piece of wood to stick. The
    other Friday I was waiting for a piece to stick and after a while
    I went on, thinking it had got stuck; unluckily it had not and
    it came off. That very same piece of wood has come off every day
    except to-day. This shows any one that one needs time and patience.
    Also you have to wait a while because some one has run off with the
    glue-pot, or else I find my file or gimlet disappeared."

    "When I first began handwork I could not knock a nail in
    straight or else I would hit my fingers. But I can now knock a nail
    in straight and without knocking my fingers. I can saw much more
    quickly than when I first began."

    "It teaches us a great lesson of patience. For instance, it is
    very trying to have to sit or stand for quite a long while holding
    some little refractory piece of wood that will not stick however
    much one tries: but it is no good getting cross, for the work will
    not be finished if we do not stick the little piece of wood or
    paper."

    "Once mother told me I had not any idea for anything, but now
    she says I am much better, this being one result of handwork."

    "Handwork, I think, has cured me of one fault and that is
    inaccuracy, for if the wood is not the proper length, it will not
    fit on to the thing which is being made. I have never done this
    kind of work before, but I think it does help us when we are grown
    up; one way is that everything must be accurate; and it is also
    very nice to make things."

    "I find that handwork helps me greatly, as I am bad at my
    drawing and needlework."

    "I love using the saws and hammers. Mother is going to give me
    a set of fretwork tools so that I can put fancy tops to my frames,
    etc. If I had a little sister or brother I would make a motor or
    train, but as I am the only one, I make things for ornaments. Next
    I shall make a table with the two sides to let down, or one with a
    separate leaf to put in. Handwork teaches you to be exact and to
    hold things delicately. It is very awkward to hammer a nail into a
    thin leg of a table or chair, because they wobble over."

    "I think handwork is very interesting and it has taught me
    patience. I am not allowed to read more than half an hour after I
    have done my homework and practice because my eyes are weak, and
    as I am what some people call a bookworm I used to miss reading a
    great deal, but now I do handwork in my spare time. One day I hope
    to complete my doll's house, its garage and furniture, but I have
    not finished the house yet. I like making such things as chairs
    and tables best of all.

    Handwork lessons were unknown to me until
    I came to this school nearly two terms ago, and at first Mamma was
    always telling me that she would not let me do any more at home,
    until I thought of putting paper on the floor, which keeps the
    shavings and sawdust from untidying the floor. I always do this
    now, and when the paper is taken up I do not have so much trouble
    as that of picking the pieces off the mat and then sweeping the
    floor before I go to bed."

    "Handwork also helps to make one accurate and careful; perhaps
    your fingers 'were all thumbs,' as the saying goes, before you
    started handwork, but you find that after say a month your fingers
    would be able to touch a frail thing without breaking it."

    Their desire to make and remake varies between 'pleasure toys' and useful articles; one suspects sometimes a desire to appease the vexation of the 'house-proud' mother when there is much disorder caused at home with shavings and sawdust.

    "I can not only make toys, but useful things such as dish
    stands, brackets, photo frames, also easels to stand photographs
    on."

    "I like handwork. For voluntary work I do handwork, and it is
    also our first lesson on Friday afternoon. I like it because it
    helps us to make useful things. For voluntary work I am making a
    medicine chest. It will be handy, because we always have a great
    deal of medicine at home. Last term I made a knife-box, and it
    was useful, because Mama's was getting old. My favourite tools
    at handwork are the saw and hammer. Next term I want to make a
    writing-case and a Red Cross motor."

    "I enjoy going to handwork very much. The first thing to
    think about, on getting down to the handwork-room, is setting to
    work, and going about everything quietly. Everything in handwork,
    to be done nicely, must be neat, clean, and carefully made and
    put together.

    In handwork I have made an easel (which is a bit
    difficult to fix, unless one has a proper hinge at the back) and
    a picture-frame and a little doll's house, and I would like to
    make another one, as I think it is so interesting planning out
    each little corner for different things, and it helps one to think
    of how they would plan out a home if they had one of their own,
    as perhaps some of us will. I am now making a tram-car, which is
    really very difficult. I have not nearly finished yet, as there is
    such a great deal of work in it."

    "Girls' likings for tools differ, but a file is the nicest
    tool, in my eyes; it makes the rough places quite smooth and
    nice. In my experience of handwork I have made a boat with the
    captain's bridge and riggings, funnels, masts, and railings around
    the edge. I have also made a picture frame and doll's furniture
    for a friend's sister. At home I have made a basement for a doll
    gentleman's house for the servants to live in; I papered it and
    made it look neat and tidy."

    "It is rather nice to see all of the girls making things at
    the tables as busy as bees and it is nice to see their faces when
    they look at the thing which they have just finished."

    "The lesson I enjoy most during the week is the one termed
    handwork, really carpentering on a small scale. There are many
    things you can make, and if you take great pains with them they
    become really pretty little ornaments; in fact, I am thinking of
    having some shelves specially for my toys."

    "When thinking of what measurements to make your toy and
    planning it out in figures I think that it helps you greatly in
    arithmetic. The hardest tool to use, I find, is the saw; you have
    to have a steady hand to use it. When I first took handwork lessons
    I used to think it hard work, but now I think otherwise, and feel
    rather grand when I show my parents the things I have made. The
    most important use of handwork is that when you are older you can
    knock a nail in or mend anything that needs mending in the wooden
    line, instead of having to wait until father, brother, or husband
    comes home tired for them to do it.

    As well as this there might
    come a time when the making of toys would help to earn the daily
    bread."

    "I am making a tram-car now, and when I have finished it I
    want to make a whole set of furniture for a doll's house. The
    hardest part of it will be when I am putting legs on tables or
    chairs. They have to be quite straight or the table will not stand
    up."

    "Sometimes we have just settled a post or a rail in the right
    place with the help of some glue when somebody knocks the table and
    over goes our piece of wood. Then we have 'to grin and bear it.'"

    "Our teacher's name is Miss Polkinghorne, she being very
    skilful and does much better work than us for we are only
    miniatures yet awhile!"

    "When I grow up handwork will be useful to me, for if anything
    breaks I shall know how to mend it, and if I had children I could
    make things to amuse them. Often I do handwork at home. I like
    using the saw better than any other tool. I have made a good many
    things, but I think the best was a little toy motor-car. Handwork
    is my favourite lesson; when I grow up I shall never leave off
    doing handwork. My little sister helps me sometimes. I think she
    will like it. My mother has asked me to make a little thing to put
    match-boxes in."

    "I think that it helps to make you very careful. For when one
    is hammering and the hammer slips you get hurt and that makes one
    careful. The hardest thing to do in a writing-case is to saw the
    piece of wood for the ink division. It is hard to get the exact
    size, but it does not look nice if it does not fit exactly."

    "I like handwork because it is different from any other lesson
    in the week; there is not much writing to do, only to mark on the
    wood certain lengths."

    "I once spent a long time in doing a ship, but I could not
    get on. I spent a very long time in trying to take the paper off a
    tobacco box, but it was not going to come. I then went on with the
    making, but it kept falling to pieces. I took it home, and took
    necessary materials with it; paper for flags and nails. I was a
    long time in doing it, as I took everything apart and scratched all
    of the paper off; but it now looks very much better. Handwork is
    rather a funny kind of occupation for girls, but it teaches us how
    to do things."

    "Handwork is one of the most interesting lessons that there
    is. It helps one to have ideas, and also to be careful. The reason
    why I like it is because I think that most people should have a
    pastime and this is a very pleasant one, and I think most children
    will agree to this point."

    "I have to use many kinds of tools but the nicest is the
    hammer, because when I use it I know I am near the end of a piece
    of work. (It is not that I dislike handwork, but that I am going to
    start something fresh.) I have already made two picture-frames, two
    beds, a swing, a chair, a motor-car, an easel, and I am now making
    another swing. I think I shall try to make a baby's cot after I
    have finished my swing."

    "I prefer to saw wood and stick pieces of wood together to
    hammering nails in the wood, because the nails are sometimes
    difficult to get in, for they very often go in crookedly. When we
    get older and understand handwork more thoroughly we may be able
    to make things for the home, such as knife-boxes and paper-racks;
    the things we make now are mostly pleasure toys that we will amuse
    our younger brothers and sisters with. In most cases it needs a
    great deal of patience, for the things, however simple, have some
    difficult part."

    "I like making toys, so then if you make them nicely you can
    take them home for your little sisters and brothers to play with.
    Handwork gives you ideas about things. We can make very useful
    things such as letter-racks and pipe-racks. I like making furniture
    for dolls' houses--chairs, tables, and sofas. I like making swings.
    Some of us make animals."

    "I do not know very much about handwork, as I have scarcely
    handled a tool before I came here this term, but I think I shall
    always enjoy it very much."

    "I am making a doll's house now, for my little sister (aged
    five), and I think it is teaching me to make myself useful, because
    nobody at home cares for it much, so I will soon be able to mend
    chairs, make brackets, etc., etc."

    "Since we have not been able to have proper firewood at
    home lately, mother has had large wooden boxes to chop (a thing
    I delight in doing), and now and again mother has given me a few
    of them. I tried to make things out of them and soon found it too
    rough: so father has given me some nice polished wood, and he says
    that perhaps soon he will buy me a nice little fret-saw set of
    tools as his are so large and clumsy."

    "I think I like sawing best of all, but I think I like all the
    rest very well; I get quite excited when Thursday and Friday come
    round (for those are the days on which we have handwork)."

    "Mother thinks it is a splendid thing for girls, and I quite
    agree with her. And we both think that it will help me on with my
    geometry (which I'm not very brilliant in, but am trying my best)."

    These compositions were written in school and the extracts have not been corrected, they are just as the children wrote them; we add no commentary, but let them speak for themselves.

    TOY-MAKING IN SCHOOL AND HOME

    CHAPTER I

    TOY-MAKING AND ITS EDUCATIONAL POSSIBILITIES

    One's main object in teaching children how to make toys should be "to teach them how to make toys." Through their efforts to make a beautiful toy they may become more patient, more accurate, more observant, and more nimble with their fingers, but these virtues will come more naturally and readily if the teacher has but one object in view; singleness of purpose is the secret of success.

    Through classes in toy-making rightly conducted the children become more resourceful, more quick at finding the right thing for the right place, happier in some cases--that is to say, the so-called dull child, the child that has no gift for mathematics, no memory for languages, can often find in the handwork class the happiness of doing something well, of producing a praiseworthy and pleasure-giving piece of work.

    It is very necessary to find occupation for backward children, who sometimes drift rather aimlessly through the school, occupation that will develop initiative and involve effort, occupation that will bring disappointments (so often one careless bit of work spoils an almost finished toy), but will also bring the joy of successful achievement.

    The ordinary lessons--English, French, etc.--may be said also to bring their disappointments and joys, but not in the same tangible way as the handwork lesson. The table that will not stand steadily because all its legs have not been carefully cut the right length teaches to a certain type of mind a more forcible lesson than the incorrect sum or French exercise.

    Again, it is very necessary that one lesson period a week should be devoted to an occupation which is of the nature of a hobby; the ordinary history and geography lessons do not often suggest voluntary work for the children's leisure. Indeed, in many cases it is easier to train children to become future clerks and teachers than to train them how to use their leisure. Now handwork classes suggest leisure occupations.

    The children who begin to make their own toys in the lower forms for themselves, when older will want to make them for other little children, when older, too, they will begin to ask how to make useful articles--writing-cases, medicine-chests, knife-boxes, soap-boxes--articles very frequently suggested by their parents and much valued by them when made.

    One need scarcely fear for the future of the child, however dull and mechanical her daily work as a grown-up person may be, if she has abundant interests in life--if she can use and love to use in leisure moments hammer, saw, and file, or if she has some other healthy hobby.

    Still, for those who like the pleasant noise and pleasant mess caused by tools, it is hard to find a happier occupation than toy-making. A toy-maker becomes at once a collector of useful odds and ends, and a collector (that is, one who collects willingly the things he likes) is always a happy person; the toy-maker becomes, too, the contriver, one who can adapt materials to different purposes, and the giver--for the finished article must be disposed of.

    The mere acquisition of knowledge forms the least important part of school work. A large number of facts in connexion with history, geography, French, etc., have rightly to be learnt by heart and are useful to the child in after life, but they do not bring with them necessarily wisdom, nor does the learning of them play such an important part in the child's development as the activity of the child in the handwork class does.

    Some one has wisely said, "If education at school means nothing more to the children than a respectable routine and a few examinations successfully circumvented, then education is a failure; if besides that, it has enlivened the years and counted for something in the general joy of growing, then it has a real value--a value which entitles it to a place among happy memories, perhaps even the highest place of all." Many of us perhaps feel in looking back on our schooldays how many good things we lost for the sake of learning some now forgotten facts; how many good things we lost to be first in class; we confused means with ends, we toiled over our history and learnt it to get full marks in the coming test (we should have toiled over our toy for love of making it and to produce as perfect a one as possible); in after life we would gladly tread some of the by-paths of knowledge, have some hobby, but our rigorous system of training left us no opportunity in young days, and sapped the energy that alone would make it possible in after years.

    No scheme of work then for schooldays must be so rigorous that it leaves no leisure for 'feast days.' Some days, some hours must come back to memory, bringing not only their past happiness, but ideas for present occupation. The happiest days of youth are generally the busiest, days when one had something one really wanted to be busy about for its own sake, not for the sake of marks or for the sake of outstripping one's fellow-pupils, or for the sake of one's future. These busy, happy, idle days are the feast days of youth, days one thinks of as the poet thought when he wrote:

    And none will know the gleam there used to be
    About the feast days freshly kept by me,
    But men will call the golden hour of bliss
    'About this time,' or 'shortly after this.'

    This book on toy-making is not written to advocate the so-called 'primrose path in education,' the 'turn-work-into-play theory,' though undoubtedly the first chapters at least of this book will be attacked by those who fear that education is yielding or is going to yield to a popular clamour for ease.

    For these people, too, Masefield has a message:

    Best trust the happy moments. What they gave
    Makes man less fearful of the certain grave,
    And gives his work compassion and new eyes;
    The days that make us happy make us wise.

    Moreover, every teacher of handwork knows how little ease the busy children in her classes get--in these classes they are never passive listeners or passive learners by heart. They see the need of accuracy, the labour necessary to produce it, they suffer for every mistake they make, they realise some of the joy and pain of creating, and, best of all perhaps, they realise the joy of work--active, muscular work as distinguished from their ordinary scholarly work.

    With regard to the question of work it has been ably said that "No one has yet preached in an adequate way the gospel of work--real hard work--as the most amusing of all occupations--not a noble duty."

    It is somewhat unfortunate that directly one begins to like one's work one is accused of playing.

    To return to toy-making (which is work or play, according to whether one dislikes or likes it)--whether toy-making be taken in the school or not, the teachers will find it a useful hobby. Through it they can amuse themselves and renew their youth; through it they will have an enduring bond of union with their children.

    Our knowledge of history and geography often fails to impress our children; they probably think we are a little foolish to burden our heads with so many facts that seem to have no bearing on to-day; but when we can use our hands and make a toy they see us with other eyes, we are really clever people worth cultivating.

    If toy-making be taken as a form of handwork in school, one enlists at once the interest of the parent--especially of the father--the mother sometimes, not often, objects to the mess. This interest of the parents is a great gain; the father delights in doing a bit of the work--sticking on the difficult funnel, sawing the hard piece of wood; child learns from parent, and parent from child, and in this way the father may again remember half-forgotten ambitions, half-neglected talents, and find in toy-making a profitable occupation, profitable mainly in the fact that any occupation which recalls to the grown-up person his youth, with its fresher outlook on life, must be wholesome.

    Finally, if the handwork classes make the children more 'at home' with themselves and with life, they will have done something; if they help them toward self-realisation they will help them toward the joy the writer speaks of who says, "Joy of life seems to me to arise from a sense of being where one belongs, as I feel right here; of being four-square with the life we have chosen. All the discontented people I know are trying sedulously to be something they are not, to do something they cannot do....

    It is curious, is it not, with what skill we will adapt our sandy land to potatoes and grow our beans with clay, and with how little wisdom we farm the soil of our own natures?"

    CHAPTER II

    GENERAL PRINCIPLES; MATERIALS

    In toy-making in schools it is very necessary to design toys that can be made from materials which are easily obtained. The Board of Education in a report on handwork in the London elementary schools says: "The range of materials used is limited, as a rule, to paper, cardboard, clay, and 'prepared wood' or 'stripwood.' It is perhaps unfortunate that these are almost entirely 'school materials,' in other words materials which are not likely to be much used outside the school, either in the child's home or in after life."

    There is truth in this--to give the child too much 'prepared material' tends to make him less inventive, resourceful, and painstaking, and prevents him from continuing his work at home, where he has not got prepared material. Any series of toys made from the same material--say a series of toys made from match stales or from 'stripwood'--has very limited educational advantages. Toys made from a combination of waste materials are the best--match-boxes, cardboard and wooden boxes of all sizes, mantle-boxes, reels, corks, broom-handles, silver paper, etc., can all play a part in producing an effective, even a beautiful toy.

    Most of the toys described in this book are made from so-called 'waste materials.'

    With regard to infant school work, squares of white paper--cartridge paper or ordinary exercise paper--which the children can colour themselves are better than a too slavish use of the coloured gummed squares supplied to schools. Further directions with regard to materials will be given in connexion with the various toys. It is advisable to use as few tools as possible, both because the fewer tools the less expense and because the fewer tools the more thought and ingenuity required.

    To have a perfect instrument at hand for every need paralyses work, thought, and happiness. Most of the toys in this book are made--if for little ones, with scissors, if for older ones, with hammer, saw, and file.

    A graduated course is necessary. Generally speaking, the little ones from five to seven make their toys of paper, clay, plasticine, and raffia. Children from seven to ten can make simple wooden toys. Wooden toys are the best; many things can be done with wood, impossible with cardboard or paper, and they are so lasting.

    Cardboard modelling is always difficult, and as a rule should not be attempted by children younger than nine. Except that they provide practice in accurate measurement, toys made of paper and cardboard by children of nine or older are disappointing, they crush so quickly.

    Quite strong toys can, however, be made from a combination of wood, cardboard, and paper.

    If really strong paper toys are required (for example, the various articles of doll's furniture, the table and chair, etc., are more valuable if strongly made), an excellent medium can be made by pasting (using ordinary flour paste) two or three sheets of paper together and allowing them to dry thoroughly under pressure. Both or all three sheets must be pasted over before they are brought together to avoid subsequent curling. This will, however, prove too stiff a medium for children younger than five.

    =Skewers= will be found very useful in toy-making. Any ordinary metal skewer is useful for boring holes in cardboard and corks, while the short meat skewers, three inches long (cost twopence per dozen), are an excellent substitute for bradawls when the children are making the early light woodwork models; later on in woodwork a fine workman's bradawl is required, or a drill.

    Wooden skewers are useful for axles of all kinds.

    Another useful boring tool (for making holes in paper, corks, or cardboard) is the metal pin stopper supplied with tubes of seccotine.

    This bores a hole in cardboard or paper that is the right size for a match. When boring holes in cardboard the children will find a cotton reel useful to bore upon; their meat skewer or seccotine pin stopper can then pass through the cardboard into the hole in the reel.

    =Methods of joining Cardboard and Paper Edges.= (1) Leaving a flange. In Fig. 1 the shaded portions represent flanges--flange A is for joining side of house B to C, flanges D, E, F, G are for holding the roof; they must, of course, be bent at right angles to the sides B and H. (Note flange in socket of candlestick, Fig. 49, Chapter IV, and in pigeon-house, Chapter X.)

    [Illustration: FIG. 1]

    If Fig. 1 is made of cardboard, flange A must have the surface of the cardboard pared away, otherwise the joining will be clumsy. The dotted lines represent bends only in the case of paper, but half cuts in the case of cardboard.

    [Illustration: FIG. 2]

    With regard to the size of the flange, this will depend upon the strength of the adhesive used and the stiffness of the material.

    Generally speaking, the larger the flange the better, for a narrow flange tends to turn up and must be held down longer than a wide one.

    A good general rule to remember when joining two pieces of material is this--that it is always the thinner of the two that is to be pasted or glued. This must be borne in mind when using the second method of joining cardboard or paper edges.

    [Illustration: FIG. 3_a_]

    [Illustration: FIG. 3_b_]

    (2) Using paper hinges. The hinge should extend the whole length of the edges that come together, as in Fig. 2, where pieces of cardboard A and B are joined by the hinge a b c d e f. Before pasting the hinge must be folded along b e, care being taken that b e is at right angles to a c and d f.

    The sides, bottom, and roof of the Noah's Ark are joined together by paper hinges (Chapter X).

    (3) Wherever it is necessary to join curved edges, the flange must be cut as in Fig. 3_a_, flange a b c d. Fig. 3_b_ shows paper curved and flanges bent down ready for pasting.

    This is the method used for fastening on paper funnels, the bottom of the paper mug (Fig. 57, Chapter IV), etc.

    =The Making and Fixing of Wheels.= If it is desired to attach movable wheels to any of the toys described in the following chapters (in the early chapters for greater simplicity the wheels are gummed to sides of carts, or to matches, etc.), the following methods are suggested.

    (1) The wheels can be rigidly fixed to the axle--that is, a match end is pushed tight into the cardboard wheel and the axle is free to turn in loose bearings, as in Fig. 4, fixed under the cart or other vehicle or to the sides. These bearings can be cut from cardboard or cartridge paper.

    In Fig. 4 the paper is bent at a right angle along the dotted line, and the rectangular portion is gummed under the cart. If the rectangular portion is gummed to the side of the cart no bend is needed. The parts of the match sticks that pass through the holes must be rounded with sand-paper so that they will turn easily in the holes.

    [Illustration: FIG. 4]

    (2) The axle can be glued to the bottom of the cart and the wheels left free to revolve. The wheels are kept in their places by the following plan. Cut some small cardboard washers, seccotine one near each end of the axle as in Fig. 5_a_, taking care that they do not come under the cart. Slip on the wheels, taking care that the centre hole is punched large enough to allow the wheel to revolve freely. This will be the case if a steel meat skewer (size about 7 inches long) has been used to make the holes. Fix washers outside the wheels to keep them on, as in Fig. 5_b_. These washers keep the wheels from sagging.

    These wheels will revolve if the match stick has been rounded with sand-paper.

    [Illustration: FIG. 5_a_]

    [Illustration: FIG. 5_b_]

    With regard to the arrangement of the toys in this book, roughly they are described in order of difficulty, but for convenience sometimes this order has been departed from. For example, match-box toys have been grouped together, cork animals, etc. The teacher must select her own models from different parts of the book and use them in accordance with her children's ability and her own taste.

    Another important principle to follow is this. The teacher should give as few directions as possible, be as silent as it is possible for a teacher to be. The child has an excellent opportunity in these classes of learning from his own mistakes. This opportunity must not be taken from him; he must be given the chance of finding out his own mistakes.

    Moreover, every difficulty should not be anticipated for the child; nor should too many warnings be given. Let the children set to work as soon as possible and use their tools without too many instructions about them. Let them ask, let them have the pleasure of discovering; every child wants to learn, but not every child wants to be taught.

    All models should be made as large as is reasonably possible; this should be insisted on from the beginning. Lastly, great accuracy (though much to be desired) must not be expected from the child; careful work must be insisted on, but one must learn to recognise the careful work of a child (which is so different from that of the grown-up person) and not heedlessly blame him or her for not reaching perfection.

    Accuracy is so often the outcome of 'lack of vision.' The child so often has that 'vision,' that imaginative outlook on life that floods the mind with ideas, but lacks accurate power of expression, while the grown-up person has the accurate power of expression, but has lost the fresh imagination of youth and all its ideals. We must see to it that we do not dim our children's vision.

    CHAPTER III

    PAPER WORK FOR INFANTS

    =Materials.= White paper of any kind that is not too thick and bends easily, e.g. cartridge paper, plain white foolscap, pages from exercise books. Pieces of coloured paper are introduced into some of the toys. It is better, however, to encourage the children to colour the white paper with chalks. One must remember, however, children's delight in coloured paper and let them have it sometimes. A wall-paper sample book will provide coloured paper, and gummed coloured squares are supplied to most schools. These gummed squares are really too thin for effective toy-making, and there is the temptation to the child to lick them when making models from them.

    =Adhesives.= In many cases the toys can be fastened together by means of paper-fasteners. Where this is not possible the following adhesives are recommended. (1) Gloy--this is clean and fastens the paper fairly securely. (2) Higgins' Vegetable Glue. This has one great advantage over Gloy: it cannot be spilt. A little of it can be put on a piece of paper for each child; this is a great convenience in a large class. (3) Home-made paste of flour and water; this is very clean and wholesome.

    PAPER TOYS FROM THE SQUARE

    The following toys should be made as large as possible, never from a square of less than 4 inches each side. The larger the toy the thicker the paper that can be used and the stronger it is. In the following diagrams, lines to be cut are drawn, lines to be folded are dotted, parts to be cut off are shaded.

    As soon as possible the child should be shown how to make a large brown paper envelope to keep his work in.

    Model 1. =The Rabbit Hutch.= Fold paper into 16 squares as in Fig. 6.

    Cut lines indicated. Draw bars in square A, or fold along T S (Fig. 7) and cut out the bars; the door is drawn and cut in square =B=. Colour the whole yellow or brown to represent wood. Gum L over M; N over M; O over N. The same on the other side. A small paper-fastener makes a good handle. Rabbits and carrots can be cut out of paper to furnish the hutch (Fig. 7).

    [Illustration: FIG. 6]

    From a similar square folded into sixteen squares a =Railway Carriage= can be made. In this case the door is cut in the middle of C D (Fig. 8). Windows and panels are drawn on the paper. A roll of paper is put on top for the light, or a small piece of cork can be used. The wheels are drawn by means of halfpennies, then folded in half; one half is pasted under the carriage, the other appears as in Fig. 8. Three or four carriages can be made and fastened by strips of paper.

    [Illustration: FIG. 7]

    Children delight in chalking the blinds of their carriages in various colours and labelling them 1st, 2nd, or 3rd Class. The top of the carriage should be darkened with pencil or chalk, or a piece of black paper pasted over it.

    [Illustration: FIG. 8]

    =A Luggage Van or Cattle Truck= (Fig. 9) can be made from a square of the same size by cutting off oblong E F (Fig. 6) and gumming L over N and M over L.

    The =Basket= (Fig. 10) is a simple model. One quarter of the square is cut off to form a handle. Cut remaining portion as in Fig. 11, double over corners a, b, c, d, paste corner d over D, c over C, b over B, a over A.

    [Illustration: FIG. 9]

    [Illustration: FIG. 10]

    The basket should be coloured with yellow chalk to represent straw; the handle is fastened on with paper-fasteners.

    [Illustration: FIG. 11]

    Paper fruit, apples and oranges, can be cut out to go in the basket.

    =A Wardrobe.= Fold square into sixteen parts and cut as in Fig. 12. Gum A over C and B over A. Repeat with D E F. Gum a piece of silver paper on the door for a mirror; square H, with its corners cut off, forms ornament on top (Fig. 13). A match is gummed inside, on which clothes are hung. The children can either draw these and cut them out, or cut them out from old fashion plates.

    [Illustration: FIG. 12]

    [Illustration: FIG. 13]

    [Illustration: FIG. 14]

    =An Oak Chest.= Make exactly as for wardrobe, but stand on the long side. Draw panels and colour light brown (Fig. 14). By cutting off the lid and making a handle from it a basket can be made. The children themselves may be able to suggest some of these articles and should be encouraged to.

    =A Sedan Chair= can be made in the same way as the wardrobe (see Fig. 12). Loops of paper are gummed on at A and B (Fig. 15), through which the shafts pass; a window can be cut by folding the door C D G H in half along K L. A piece of coloured paper can be gummed inside the window for a blind; some sort of ornament can be gummed at the top along C D and E F. Panels, etc., can be drawn.

    [Illustration: FIG. 15]

    =A Market Basket= (Fig. 16). Fold square as for wardrobe (Fig. 12), cut off the quarter K L M H. Gum A to B and C to A--the same with D E F. To make lids, halve the quarter K L M H. Gum K to A (outside) and L forms one lid; gum H to D and M forms the other lid. Paper-fasteners may be put in each lid for handles. The handle of basket must be made from another strip of paper. The basket should be suitably coloured before being gummed together.

    [Illustration: FIG. 16]

    =A Cradle= (Fig. 17). Begin with a square (each side four times the diameter of a penny). Fold and gum together as for basket. Cut two round discs of stiff paper the size of a penny. Fold these in half. Gum one half of each disc on to bottom of cradle; the other half forms the rocker. These halves must be made less round by being cut as in Fig. 18, so that the cradle will rock. By means of the penny portions A and B can be cut to form top and bottom of cradle, a strip of paper C D E can be gummed across one end (round A) to form a hood (Fig. 17).

    [Illustration: FIG. 17]

    [Illustration: FIG. 18]

    [Illustration: FIG. 19]

    [Illustration: FIG. 20]

    =A Settee.= Fold a square as for wardrobe (Fig. 12), cut off one quarter, K L M H. Gum A to B, D to E for arms. Cut arms as in Fig. 20.

    For back legs of settee use portion K L M H; gum K to F and H to C (Fig. 19). To strengthen the settee gum a piece of paper over N O and M L. Coloured paper can be pasted on back, sides and seat as shown in drawing. The legs may either be cut out or simply drawn on the paper as in illustration (Fig. 20). The settee will prove a really strong piece of doll's furniture. The children should be allowed to furnish a doll's house with the various articles described in this book. When they have had some practice in making them each child can be allowed to make one piece of furniture for a school doll's house.

    [Illustration: FIG. 21]

    [Illustration: FIG. 22]

    =Table.= Top of table is a square of white cartridge paper. Make the legs from a double square, each square the same size as top of table.

    Fold and cut the double square as in Fig. 21. Bend flaps A B C D carefully along a b. Gum A to B, C to B, D to A to form legs. Gum square top on to A B C D. A square of coloured paper can be gummed on to top of table as in drawing (Fig. 22). Leg E can be gummed to F by means of a paper hinge, or a flange may be provided, as in Fig. 1.

    [Illustration: FIG. 23]

    [Illustration: FIG. 24]

    To make a =Chair= to go with the table. Take a double square the same size as that used for legs of table. Fold into eight as in Fig. 24. Cut in half along a b. Squares A, B, C form front legs, seat and back of chair respectively. Square F is gummed to B, so that E forms back legs.

    The chair must be strengthened by gumming H to C and G to E. Coloured squares can be gummed to seat and back; the rest of the chair can be chalked to represent wood (Fig. 23). A dining-room suite may be made in this way.

    =Side-board.= Begin with two equal squares. Cut and fasten one square together as for rabbit hutch (Fig. 6), but cut two doors. One quarter of the second square must be cut and gummed on to back to form a mirrored top (Fig. 25). A piece of silver paper may be gummed on to back for a mirror. From the rest of the second square plates and dishes can be cut and coloured to go on top and inside sideboard.

    [Illustration: FIG. 25]

    [Illustration: FIG. 26]

    [Illustration: FIG. 27]

    =An Arm-chair.= Begin with square folded into sixteen parts (Fig. 26), cut off one quarter D H N S, again cut off one quarter O P R. Cut remaining square as in diagram. Gum E to A and G to C. Cut these squares to form arms. Gum O to K and R to M to form back legs and sides. To strengthen chair cut off N from D H. Gum H to P and D to B. The corners of B are rounded. Coloured paper can be pasted over the arms and in the middle of back, seat and sides (Fig. 27). Legs can be chalked on P, L, K and M, or cut out as shown in the figure. If preferred the arms are not folded over but cut round. This arm-chair is a strong one and will hold a heavy doll.

    [Illustration: FIG. 28]

    [Illustration: FIG. 29]

    =A Bed.= Fold a double square as in Fig. 28. Cut portions indicated. Gum A B C D to E F G H, the same the other side. Bend up M and N to form head and foot of bed. These can be cut any shape, or simply be coloured to represent beams. Legs can be drawn on or cut out of sides F H K L and B O D P (Fig. 29).

    [Illustration: FIG. 30]

    [Illustration: FIG. 31]

    [Illustration: FIG. 32]

    =A Coal Scuttle.= Begin with a 4-inch square, fold into sixteen parts, cut off a quarter, cut off a quarter again; cut remaining portion as in Fig. 30. Gum A over B, C over B. For the stand take the smallest quarter (Fig. 32), fold and cut as in diagram. Gum A to bottom of coal scuttle, B and C form the supports; a handle can be cut and gummed on as in Fig. 31.

    The children can cut a shovel out of paper to slip in a little paper band at the back (Fig. 31). The coal scuttle should be coloured black, with yellow to represent brass.

    [Illustration: FIG. 33]

    [Illustration: FIG. 34]

    =A Drawing-room Cabinet.= Fold and cut square as in Fig. 33. Gum B over A, C over D. Bend E and K down and cut corners off to form shelves as in Fig. 34. G H can be cut round, or in any way to make suitable top for cabinet. Silver paper can be pasted on where desired for mirrors, doors cut or drawn, etc. From Fig. 33 the children will be able to make a number of simple and effective articles of doll's furniture--namely, doll's dresser, oak settee for hall, dressing-table, wash-stand, writing-case. These the children must be allowed to suggest and think out themselves.

    [Illustration: FIG. 35]

    =A Shop or Stall.= This will hold together without the use of gum. Fold and cut as in Fig. 35. Fold together so that square E N G M covers square G M K T; the same the other side. Bend back C S G Q along S Q to form side (Fig. 36); the same the other side. Fold B F D H along F H for roof, fold B V D W down as in Fig. 36; this portion should have name of shop written on it. Fold A B F C along R S, so that A C coincides with B F. Fold down R B X V so that top of C S G Q lies between R B X V and A R X Z; the same the other side; this folding keeps the shop together.

    Gum can be used if greater strength is desired. From paper the children can cut materials to furnish their stall. From a similar square a piano can be made as in Fig. 37. A piece of paper must be gummed to V B W D to close up the hollow; the sides S C G Q must not be bent back but cut as in Fig. 37 to represent the sides of a piano.

    [Illustration: FIG. 36]

    [Illustration: FIG. 37]

    [Illustration: FIG. 38]

    =Some Simple Tents.= A good imitation of an "A" tent can be made by little ones from a square. Several of these make an excellent encampment for toy soldiers. Fold and cut square as in Fig. 38. To fasten it together paste square 1 to square 2; this forms the back of the tent; edges P O, K L, etc., rest along the ground. Corners L and M must be bent back to form the entrance. Pieces of cotton are fastened along F M and F L for straps for lacing up the entrance (see Fig. 39).

    [Illustration: FIG. 39]

    [Illustration: FIG. 40]

    Fig. 40 shows a drawing of a real "A" tent spread out flat upon the ground. It is made of strips of canvas, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 sewn together. Children can imitate this in paper.

    [Illustration: FIG. 41]

    =A Triangular Tent.= This is very simple. Fold and cut as in Fig. 41.

    Paste A E B over E B D. Cut door at F.

    CHAPTER IV

    MORE PAPER TOYS

    [Illustration: FIG. 42]

    [Illustration: FIG. 43]

    =A Bridge= (Fig. 42). Begin with square (8 inches each side), fold in four and cut off one piece. Fold again in four, folds running in opposite directions to first folds, and cut off one piece. A square, A B C D, remains, divided into nine squares (Fig. 43). Fold A G and F C in halves, cut off shaded portions. Join L E, F N, M Gand H O, and cut off shaded portions. Cut along L R, N S, M P and O Q; bend as in Fig. 42.

    Matches can be gummed on the slopes of the bridge. If a piece of white cardboard or paper is placed underneath a river can be marked on it and paper boats made.

    [Illustration: FIG. 44]

    [Illustration: FIG. 45]

    The children can make a very pretty scene from this. Trees can be coloured and cut out of paper and gummed upright by means of a little flap of paper left at the end of the trunk of the tree. The house can be cut out of a piece of folded paper (Fig. 44) so that it will stand; animals can be cut in a similar way (Fig. 45). Boats are made of plasticine, with paper sails stuck in it. Children can add other animals and think of other additions to the scene.

    [Illustration: FIG. 46]

    [Illustration: FIG. 47]

    [Illustration: FIG. 48]

    =A Punt= (Fig. 46). Begin with a square, fold into sixteen parts, cut off a quarter. Fold in half oblongs A B and C D (Fig. 47). Cut off the shaded portions. Cut along the lines M E, C N, O B, P G. Fold along M K, F N, O L and P H. The child will accomplish this fold more easily if she puts her ruler along a line from K to M and folds the paper over it.

    A coloured band should be chalked round the punt. To fasten it together gum K E M to M E C N, C N F to M E C N and so on the other side. Three seats are fastened inside, made from the quarter cut off the original square. The length of the seat is equal to the distance E C; the height of the seat to half of the distance K E (Fig. 48).

    The punt should be made from a square of cartridge paper, eleven inches each side. It will be found to float well on water.

    [Illustration: FIG. 49]

    [Illustration: FIG. 50]

    =A Candlestick= (Fig. 49). Begin with two squares of coloured paper (sides 4 inches); one forms the bottom of the candlestick; half the other forms the socket. To make the socket fold and cut as in Fig. 50.

    The other half divided lengthways forms the handle. The handle and socket can be fastened on with paper-fasteners or gummed. It looks neater when gummed. A roll of yellow paper or white paper coloured forms the candle; into this roll some cotton-wool is put and into this a piece of red paper for the flame. Children delight in making candlesticks of different colours and decorating their form rooms with them. The candlestick can be strengthened by being gummed on to a piece of cardboard (a post-card will do). A round candlestick can be made in a similar way.

    To make the socket, fold the oblong (Fig. 50) into four parts, leaving a piece, E, over; gum E to A.

    =A Lantern.= Begin with an oblong 8 inches by 5-1/2 inches, A B C D (Fig. 51). Fold along E T K and G H to get flanges. Fold C A B D into half to obtain the line L M, and fold A L M B into four parts to obtain the line L´ M´. Fold A H C G into four parts along Q P, O N and S R.

    Draw the top of the lantern in A H L´ M´, as in Fig. 51, and cut off the shaded portion. Draw or cut windows in the sides of the lantern. Cut the flange abc as in the diagram. Make the candle and the candlestick to fit into the lantern as in Fig. 49. (Note the length of the edge of the candlestick is the width of the lantern E T.) Bend the flanges a, b, c at right angles to the sides and gum the candlestick to these.

    Flange d can be gummed to the edge L´ E, and a door cut in one of the sides, or flange d can be cut off and then side l forms the door.

    Make holes in the tops of the lantern and tie together with thread, as in Fig. 52, or the flanges can be left round the triangular tops and they can be gummed together. Fig. 52 shows the finished model.

    [Illustration: FIG. 51]

    [Illustration: FIG. 52]

    =Colouring the Lantern.= The lantern can be made of black paper (lines must be drawn on the white side), or white paper chalked, or painted black or yellow, etc., according to taste.

    [Illustration: FIG. 53]

    =A Well and Bucket.= The well is made from an oblong about 2-1/2 inches by 10 inches. Fold down one side of the oblong, about 1/2 inch; make cuts along this fold as in Fig. 54. When the paper is bent round to form the well, these cut pieces form the edge of the well (Fig. 53). A B is a piece of cardboard or stiff paper bent, as shown in the diagram, and gummed to the sides of the well. Two holes must first be made in A and B. Then through these holes a piece of cane C is passed. D and E are pieces of cardboard of equal size; holes are made in each end and the strips are glued to each end of the piece of cane.

    Into the other holes are glued two smaller pieces of cane or two matches, F and G, for handles. The well should be coloured red before being fastened together.

    [Illustration: FIG. 54]

    [Illustration: FIG. 55]

    [Illustration: FIG. 56]

    The bucket (Fig. 55) is made from a small oblong. Fold and cut off the shaded parts as in Fig. 56. When the bucket is fastened together stand on a piece of paper and draw round it to get the measurement for a circular disc for the bottom. Cut this out and gum it to the bent edges 1, 2, 3, 4. A handle can be made of string or paper.

    [Illustration: FIG. 57]

    =A Mug= (Fig. 57). This is made like the bucket. The handle is made of a strip of paper fastened to the mug by paper-clips. A band of coloured paper is gummed round the mug; the handle can be made of the same coloured paper as the band.

    [Illustration: FIG. 58]

    =Motor-car.= Begin with a square (8-inch side). Halve it. Fold each half into thirty-two parts. Cut one half as in diagram 58. Gum A to B and D to C, E to F and H to H. This forms the body of the car. The doors must be cut in squares K, M, L, N. From the second half (folded into thirty-two) pieces can be cut to cover exactly the front of the car, and to form seats O and R and backs and sides, S T. See Fig. 59. The wheels are drawn on stiff paper or cardboard by means of halfpennies, cut out and gummed on to the sides. The children of six who made this car enjoyed adding, according to their own ideas, steps, steering-wheel, and other details.

    The car looks more attractive if coloured and if the seats are covered with red paper.

    [Illustration: FIG. 59]

    [Illustration: FIG. 60]

    From a similar square (8-inch side), divided into two (each half divided into thirty-two parts), a =Book-case= can be made (see Fig. 60). One half gummed together as for the motor forms the case; the other half forms the shelves and the ornament on top. A door can easily be added, or two doors, one on each side.

    [Illustration: FIG. 61]

    =A Wigwam.= Begin with half a square (Fig. 61). Fold into thirty-two parts. Draw a curved line from A through B and C to D, and from A through E and F to G. Cut along these lines. Join K with H by a curved line and H with L. Cut along this line. Gum L N to K M. Fold back the corners G and D for the door. Strips of paper can be cut out and gummed inside the wigwam for poles. Designs can be drawn on wigwam as in Fig.

    1. Marks from K to K show where it is laced up. The wigwam should be

    coloured brown, the circles on it red and white or yellow. This model will be found useful when illustrating scenes from Hiawatha. Other simple models to go with this are--a bow, arrows, quiver, canoe. The bow can be made from a piece of cane, the arrows cut out of paper.

    [Illustration: FIG. 62]

    [Illustration: FIG. 63]

    [Illustration: FIG. 64]

    =A Quiver.= Fold square into sixteen parts (Fig. 63). Join A to C, C to D, D to B by curved line; cut along it. Join E with G and bend along it;

    G with F and bend along it. Gum B H G to A K G. Fasten a piece of string as in the drawing (Fig. 64). [Illustration: FIG. 65]

    [Illustration: FIG. 66]

    For =Canoe= begin with an oblong 6-1/2 inches long (Fig. 65); width, twice the diameter of a penny. Fold in half along G H. Make half circles A B C and F E D, at each end, by means of penny. Cut around A B C and D E F. Fold in half along B E. Join A by means of curved line with B E, and F with B E. Cut along A H K F. Gum the canoe together at A B C and F E D. Cut out three seats to go in the middle; make drawings on the canoe. Paddles must be cut to go with canoe (Fig. 66).

    [Illustration: FIG. 67]

    An =Indian Cradle= can be made in the same way as the quiver, but with the point G cut off as in Fig. 67, and markings put on the front to look as though the cradle were laced up. String is attached for hanging the cradle to the mother's back or to a tree.

    Canoe, quiver and cradle look effective cut out of brown paper and chalked with yellow or red chalks.

    [Illustration: FIG. 68]

    [Illustration: FIG. 69]

    =A Clock Tower= (Fig. 69). Begin with an oblong 10 inches by 6 inches.

    Fold in eight parts, and cut off three. Fold the remaining portion A B C D in half along E F; fold A F in half along G H. Fold along as in Fig.

    1. Draw clock faces in squares 1, 2, 3 and 4, a pattern of some kind in

    triangles 5 and 6, and mark bricks on the sides 7, 8, 9, 10; side 7 is gummed over 11, which, therefore, is not seen (Fig. 69).

    [Illustration: FIG. 70]

    [Illustration: FIG. 71]

    [Illustration: FIG. 72]

    =To fasten Tower together.= Fold the sides 8 and 10 at right angles to 9; bend J forward and gum to it both K and L (Fig. 70), and cut off the part of J that projects beyond K and L. Now gum the side 7 to 11, bend O toward J; gum N to O and M to O and cut off the portion of O that projects beyond M and N. A piece of paper, painted to represent slates, can be gummed over the roof, so that it projects slightly, as in Fig. 71.

    [Illustration: FIG. 73]

    A simpler way of fastening the tower together is to gum O to J, M L and N K standing upright as in Fig. 72.

    =A Windmill= can be made in the same way. The sails are made as described in the match-box windmill (Fig. 97).

    =A Lighthouse= (Fig. 73). Take an oblong piece of paper, about 8-1/2 inches by 6 inches. Fold down each shorter edge for 1/2 inch and cut the flanges as described in the case of the bucket (Fig. 56). Bend the flanges inward, curve the paper round and gum together to form the body of the lighthouse. Cut two squares of paper, one smaller than the other, gum the smaller one A to the flanges at the top of the cylinder; colour B blue and gum it to the flanges at the bottom. Make a small lantern, as in Fig. 51, to fit the top of the lighthouse. In this case it is better to gum the triangular tops of the lantern together.

    The door, windows and staircase should be drawn and the lighthouse coloured grey before fastening the cylinder together.

    CHAPTER V

    MATCH-BOX TOYS

    Many simple and effective toys can be made from match-boxes. The great advantage of these toys is that the children can readily supply the materials themselves. In every case the toys explained here have been made by young children, whose ages vary from four to seven. The materials used are match-boxes, matches, paper of different kinds, white, brown, coloured, and cardboard, while in some toys corks and silver paper have been introduced. For sticking paper on to the boxes, gloy or vegetable glue is suitable, but when matches have to be fastened into or on to the boxes it is best to use liquid glue or seccotine. Some of the toys can be made more effective by colouring them with crayons.

    [Illustration: FIG. 74]

    [Illustration: FIG. 75]

    =A Canoe.= To make the canoe (Fig. 74) the inside portion of the match-box is gummed to a piece of stiff paper or cardboard pointed at each end. Strips of paper gummed to the sides of the box form the seats.

    The paddle (Fig. 75) is made of a match, to the ends of which paper discs are gummed. To get these circles the children can use farthings and draw round them. The paddle and the seats can be coloured with brown crayons.

    [Illustration: FIG. 76]

    =A Kayak.= For the kayak (Fig. 76) a piece of paper is measured to fit over the box; it is doubled in half and a small hole cut in it, then gummed to the sides of the box.

    =A Motor-car= (Fig. 77). The car consists of a match-box without the cover. The seats are of white paper. The following them measure and cut a piece of paper, A B C D, that will just cover the box from side to side, making bends a c and b d where the edges of the box come. Fold paper into four as in Fig. 78. Cut along e f, and cut off the shaded portions and fold as in Fig. 79. Gum the parts G and M to the side of the box.

    [Illustration: FIG. 77]

    [Illustration: FIG. 78]

    [Illustration: FIG. 79]

    Wheels for all match-box toys are made from stiff paper or cardboard, the circle being drawn from a farthing, or, where larger wheels are necessary, from a halfpenny. The spokes are drawn on the wheels. These can either be gummed to the sides of the match-box, or, if holes are made in the wheels, they can be fastened to each end of a match, which is then glued to the bottom of the box.

    [Illustration: FIG. 80]

    [Illustration: FIG. 81]

    =A House or Barn.= From the covers that are left, after making the canoe and the motor-car, a house or barn can be made (Fig. 80). One cover is cut open and the top bent back as in Fig. 81. A portion of the second cover is cut off (Fig. 82).

    [Illustration: FIG. 82]

    Side A is then gummed to B, and C D is fastened to E F by means of a piece of folded paper covering the whole of the roof. This paper is double the size of C D H G (Fig. 82), is coloured grey or blue to represent slates, and folded along the middle.

    [Illustration: FIG. 83]

    =A Sentry-box.= This is an easy toy to make. The children will notice that one end of a match-box is double--that is, one piece of wood overlaps the other. If they unfasten these and bend them out they form the roof of the sentry box (Fig. 83). A piece of paper can be pasted behind to fill up the hollow. The toy looks more effective if covered entirely with brown paper. A soldier can be cut out of paper, coloured and gummed to the bottom of the box.

    [Illustration: FIG. 84]

    =A Castle.= A castle can be made from the cover. A piece of paper is cut to fit round it, doors and windows are marked on it with pencil or crayon, and one edge is cut to represent battlements (Fig. 84).

    The flagstaff is a match glued inside. A larger castle can be made by fastening two or more covers together.

    =A Jack-in-the-box.= These toys are so simple that the diagrams almost explain themselves. In the case of the Jack-in-the-box the children like to decorate the half-opened match-box with coloured paper. The little figure is made of bits of wool, a piece of cotton is tied round the neck and put through a hole in the top, a match is tied to the cotton to prevent it slipping back; another piece of cotton tied to the waist of the doll pulls it down (Fig. 85).

    [Illustration: FIG. 85]

    [Illustration: FIG. 86]

    =A Belfry.= In the belfry the back of the box at A has been cut out, the bell is made of paper or cardboard, covered with silver paper (Fig. 86).

    A match stick is passed through a hole in the bell, and gummed to each side of the box. Another match is gummed to the bell, and a piece of cotton attached for ringing.

    [Illustration: FIG. 87]

    =A Van= (Fig. 87). The van is made from the inside of a match-box; the cover is of brown paper gummed inside the sides of the box. The seat is also of brown paper, while one end is bent back for the flap of the waggon. The shafts are made of matches.

    [Illustration: FIG. 88]

    =A Milk-cart= (Fig. 88). The can is a cork covered with silver paper, which is used to cover chocolates, etc. The paper can be screwed into a little knob at the top. In Fig. 88 the wheels are the same size. Two are fastened to a match for the axle, which is then glued underneath the box; the third wheel is glued between two matches, which are fastened underneath the box. In Fig. 89 the side wheels are larger and a cardboard set of shafts is made for the small front wheel.

    [Illustration: FIG. 89]

    [Illustration: FIG. 90]

    Fig. 90 shows the shape of these shafts. The shaded portion is bent at right angles to the shaft and glued under the box. The small wheel can be gummed between these shafts, or, if the shafts are fastened on with a space between them, and holes made in each end, a piece of match stick, on which the small wheel is mounted, can be passed through the holes. A match is glued across the back of the box (Fig. 88) to form the bar by means of which the cart is pushed along.

    [Illustration: FIG. 91]

    =A Field Gun.= Fig. 91 shows how the match-box is cut. The gun is made from a roll of brown paper. A piece 4 or 5 inches square is large enough. Yellow bands can be chalked round the cannon. The wheels are made of circular discs, the size of a penny. Shots can be made from silver paper, or from plasticine. [Illustration: FIG. 92]

    =A Field Gun and Limber.= The gun in Fig. 92 is mounted somewhat differently. A is one-third of a match-box cover, with one narrow side cut away, covered with dark grey paper; two holes are made in it opposite each other; the gun has a match or piece of cane passed through it, and the ends of the match or cane pass through the holes in A.

    B is a piece of cardboard or stiff paper shaped as in diagram: the shaded portion is gummed underneath A.

    [Illustration: FIG. 93]

    =The Limber= (Fig. 93). This is made from a match-box (C), covered with dark grey paper and fitted with a cardboard cover E, similarly coloured.

    Match sticks, coloured black, form the shots. The handle consists of two match sticks, or two strips of cardboard, glued together. The wheels must be the same size as those for the gun.

    [Illustration: FIG. 94]

    =A Porter's Truck.= This is made from a box of which three sides have been cut away (Fig. 94). It can be covered with brown paper, and matches can be glued across it. The handles are of matches, the legs of stiff paper fastened to the bottom. The children can make little paper parcels and boxes to put on the truck.

    [Illustration: FIG. 95]

    =A Sweep's Barrow.= The figure (95) shows how the match-box is used. A bundle of matches tied together represents part of the sweep's outfit.

    The broom is made from a roll of paper, the ends of which have been cut into a fringe. The broom and matches can be darkened with crayons or ink.

    [Illustration: FIG. 96]

    [Illustration: FIG. 97]

    =A Windmill= (Fig. 96). Prepare the inside of a match-box as described in the case of the sentry-box, and place it inside its cover, securing it with a little gum. Paste a piece of paper in front to hide the hollow. The sails of the windmill are made of brown paper, cut as in Fig. 97, and gummed to strips of cardboard which form the framework of the sails. The whole can then be fastened to the box by a paper-clip.

    [Illustration: FIG. 98]

    =To make the Sails turn.= Bore two holes through the windmill; round a match stick by rubbing it with sand-paper; glue the sails to one end of it, pass it through the holes and glue a circle of cardboard to the other end to prevent it slipping back. Fig. 98 shows a more complicated but very effective way of making the sails. The paper is cut along the dark lines and bent back along the dotted lines.

    [Illustration: FIG. 99]

    =A Tram-car= (Fig. 99). For this toy two insides of match-boxes are needed. The children could cut and gum to one box a piece of cardboard A B. Then into this box are gummed six matches of the same length. While these are drying the wheels can be made and the top prepared. The top is a box turned over with a piece of paper gummed round the edge. The paper should be coloured yellow. The projecting paper forms the rail round the top of the car. When the matches are quite firm the inverted box is placed over them.

    [Illustration: FIG. 100]

    =A Church= (Fig. 100). This is made from a combination of the barn or house and the castle. A strip of paper can be gummed along both sides to keep the two parts together.

    =A Match-box Train= (Fig. 101). The engine is a match-box turned upside down, to which is gummed a cork covered with red or green paper. The broad end of the cork has been sand-papered to make it more equal to the other end. The funnel is a piece of cardboard blackened and inserted into a slit in the cork. Half a match-box glued to the cork forms the cab. The coal tender is a match-box on wheels; a piece of brown paper can be pasted round one end to form the back and the sides. The simplest way of making a carriage is to fold a piece of paper into three, mark on it the door and the windows and gum it to the inside of the box.

    For this piece of paper the children can get the measurements from the match-box.

    [Illustration: FIG. 101]

    In order to make a long carriage like a real train a child suggested gumming two match-boxes together, end to end.

    When a long train was complete the children at once wanted to make a station (Fig. 102).

    [Illustration: FIG. 102]

    For this purpose two or three match-box covers can be fastened together by covering them with white paper (marked to represent the boards of a platform) and gumming them to a piece of cardboard, A B C D. The paper must be left long enough at each end to be gummed to the cardboard and form the slopes of the platform. The waiting-room or shelter is a match-box gummed to platform as in diagram, with a triangular piece of paper pasted behind to form a roof. A seat can be pasted inside. The name of the station, signals, and a signal-box (a half-opened match-box standing on end) can be added. [Illustration: FIG. 103]

    [Illustration: FIG. 104]

    [Illustration: FIG. 105]

    [Illustration: FIG. 106]

    =A Railway Bridge.= Gum two sets of four match-box covers together as A and B in Fig. 103. Next, take a half-opened match-box (C in Fig. 104), gum cover securely to box, turn it upside down and to it gum cover D, and to this, half a cover E. Fasten this to A by strips of paper gummed on each side (see shaded part in Fig. 105). B has a similar arrangement fastened to it. These portions form the two sides of the bridge, but the steps so obtained are too high and extra paper steps must be made.

    For each of these take a piece of stiff paper L M N O (Fig. 106). L M equals width of match-box; M O equals three times thickness of box.

    Fold in three along T U and R S; fold L U and T S in halves and bend paper to form steps. L Q is gummed to A and R O to E. Repeat for each intermediate step.

    [Illustration: FIG. 107]

    Next cut a piece of cardboard the width of the match-box and long enough to leave a suitable distance between the two ends of the bridge to allow the match-box train to pass through, or two trains to pass each other.

    Gum this to the top of A and B (Fig. 107).

    [Illustration: FIG. 108]

    Next cut a piece of paper F G H J to fit across both parts of the bridge and to project to form railings or a wall, cut out the archway, colour to represent stones or bricks, and gum to bridge; cut and colour a similar piece for the other side (Fig. 108).

    CHAPTER VI

    MORE COMPLICATED MATCH-BOX AND CORK TOYS

    [Illustration: FIG. 109]

    [Illustration: FIG. 110]

    [Illustration: FIG. 111]

    =A Paddle-wheel Steamer= (Fig. 109). The cover of a match-box, A B C D, is covered on top and bottom with two pieces of stiff paper or cardboard pointed at both ends (Fig. 110). A long strip of paper is cut, E F G, etc., and fastened round the cover and projecting cardboard. The box is gummed on to A B C D. The funnel is made of a roll of red paper (Fig. 111). The mast is a roll or strip of paper gummed to inside of box.

    The wheels are strips of paper held together by a paper-fastener, the paper being bent sideways. The paper-fastener clips the wheel to the side of the box. A piece of cotton-wool can be put into the funnel for smoke.

    [Illustration: FIG. 112]

    =A Castle and Drawbridge= (Fig. 112). A and B are match-boxes, with the shorter sides cut off, gummed to a square piece of cardboard (4-inch side). Along the bottom of these a piece of blue paper is gummed to represent the water in the moat. C D F E is a piece of paper with archway cut out, gummed to sides of boxes A and B, and behind this are gummed match-box covers G and H. The drawbridge is a piece of stiff paper hinged to C D, and has match sticks gummed across it. Holes are made in the bridge and wall through which pieces of thread are passed; the ends behind the drawbridge are fastened to a match.

    [Illustration: FIG. 113]

    K is a box turned upside down and gummed to G, H. L and M are covers forming a passage from drawbridge. The castle can be enlarged by adding more boxes.

    =A Lighthouse= (Fig. 113). This toy is made from two corks gummed together and fastened to the cover of a match-box which is gummed to a square of cardboard covered with blue paper. Round the box, paper, cut and coloured to represent rocks, is pasted and paper steps are fastened to one edge. Into the top cork four pieces of matches are inserted and between them is placed a small roll of red paper. A small piece of paper with four holes in it is placed on top of the matches. The corks can be coloured grey, and windows and doors painted on them. The top cork must be filed to fit the lower one, and its upper end filed to make it narrower.

    [Illustration: FIG. 114]

    =An Airship= (Fig. 114). The airship is made from three corks glued together, the thickest cork being in the middle. Matches are inserted at each end. Four matches are inserted into the corks and their other ends glued into a match-box. A piece of black thread is fastened to the matches as shown in the diagram. Matches and corks can be coloured dark grey.

    [Illustration: FIG. 115]

    =A Bristol Biplane= (Fig. 115). A B, C D are two strips of paper, in length about four times the length of a match-box, in width nearly three-quarters the length of a match-box. These are fastened together by match sticks, as shown in the diagram.

    [Illustration: FIG. 116]

    E F is cut from a piece of paper as long as A B and about the width of a match-box. This paper is doubled along E F and marked and cut out as in diagram (Fig. 116); then unfolded and pasted on the bottom of a match-box (G), to which four small cardboard wheels are pasted. A B C D is then gummed along the back of the box G at right angles to E F.

    [Illustration: FIG. 117]

    [Illustration: FIG. 118]

    =A Bird-cage= (Fig. 117). This is made of two small squares of cartridge paper fastened together by matches, as shown. When making the holes the two pieces of paper should be placed together. A piece of cotton is fastened to the matches so that the cage may be hung up. A bird for the cage is made from a small cork, as in Fig. 118. The legs are two halves of a match; the tail must touch the ground in order that the bird may stand.

    [Illustration: FIG. 119]

    =A Travelling Menagerie= (Fig. 119). Cages are made from match-boxes.

    The box is mounted on wheels, match sticks are glued inside the box, and a piece of paper with holes in it is fitted to the tops of the matches.

    [Illustration: FIG. 120]

    Animals are cut out of paper and coloured. If these animals are cut from a folded piece of paper (=Fig. 120=) they will stand.

    [Illustration: FIG. 121]

    The various cages can be harnessed to horses. A caravan to accompany the menagerie is shown in =Fig. 121=. A piece of paper folded in three is gummed to the inside of a match-box.

    On the sides windows are marked, and a round paper chimney is gummed to the top.

    [Illustration: FIG. 122]

    =A Fire-escape= (Fig. 122). The ladder is made from two narrow strips of cardboard; holes are made in these and match sticks inserted. The ends of the matches should be slightly filed or sand-papered. B is a match-box, one end, C, of which is bent forward. To this end strips of cardboard, C D, E F are gummed, and across them other strips, F D and G H. Wheels can be gummed on as in the figure. L and M are cardboard strips gummed to box and ladder to help to keep it in position. Thread could be attached as shown in diagram, and an additional ladder made to stand between L and M.

    [Illustration: FIG. 123]

    =A Mangle.= A is a match-box turned upside down to which are gummed two corks which have been filed to make them perfect cylinders (B and C in Fig. 123).

    The two corks are gummed together and a strip of paper E is bent round them, gummed to their flat ends, and also to the sides of the match-box as at F. K and H are pieces of cardboard shaped as in diagram and marked to imitate the iron legs of a mangle. These pieces are gummed to the inner sides of the match-box to form the legs. G is a circle of cardboard (on which spokes should be marked) fastened as shown in diagram; to this a cardboard or match handle, L, is attached.

    [Illustration: FIG. 124]

    =A Submarine= (Fig. 124). A, B, C are corks filed to the shapes shown in Fig. 124, and glued together. E F is a piece of cardboard, narrow and pointed at each end, gummed to the corks. Before fastening it on holes should be made in it round the edge. Through these small pins are put and pushed into the corks to form a railing, and round them a piece of black cotton is tied. G is a small cork, or a part of a large cork made small by filing, gummed to E F; a match, H, is inserted to represent the periscope. Pins are inserted round G with black cotton tied round them.

    The corks, cardboard and matches should be coloured grey.

    Older children can make this submarine so that it will float. The corks A, B, C must be fastened together by pieces of wire passing through them. The deck is made by filing the corks flat along the top, E F, and pins are inserted around it. Cork G is fastened to B by a pin. A narrow strip of lead is cut and pointed at each end, these ends are bent at right angles and are inserted into slits in A and B.

    This submarine will float well, and makes a very effective little toy.

    It could be painted with grey enamel.

    [Illustration: FIG. 125]

    [Illustration: FIG. 126]

    [Illustration: FIG. 127]

    =A Barrel Organ.= Figs. 125, 126, 127 show how a barrel organ can be made from a cork and match-box cover. A is a match-box cover, a cork; B, is made a perfect cylinder by means of sand-paper, and gummed to side of cover. It is kept in its place by a piece of paper, C D E, which is gummed to cover and also to the cork. Wheels F and G are gummed to the sides or made to revolve on axles as described in Chapter II. The handle K is made of a match stick and bent piece of cardboard. Support H and handles are made of cardboard.

    Note that the piece of paper C D E reaches nearly to the ground. This prevents the toy from overbalancing. Paper, etc., must be suitably coloured. The match-box cover might have brown paper pasted round it.

    CHAPTER VII

    CORK ANIMALS HARNESSED TO SLEDGES, ETC.

    For these toys plenty of corks are necessary, and files or sand-paper; also some pointed instrument, a long nail or bradawl, for making holes in the corks. Four of them are shown in Plate III.

    [Illustration: FIG. 128]

    =Horse and Cart.= Gum wheels (size of penny) and matches for shafts on the match-box as in Fig. 128. File or sand-paper a cork quite smooth and round the edges. Cut a horse's head out of cardboard and colour it, make a slit with a knife in the widest part of the cork, insert the horse's head, insert the tail and four matches for legs. Gum a piece of paper on the horse's back, turn up and gum the ends of a paper strip to form loops for shafts to go through. These shafts can be gummed into the loops or fastened by thread or paper to a collar round the horse's neck. (This latter way is difficult for little children.) The collar is cut out of paper.

    A piece of thread can be put through a hole in the horse's mouth for reins. Paper seats may be added to the cart.

    [Illustration: FIG. 129]

    =A Coster's Donkey Barrow= can be made in the same way, by substituting a donkey's head and cutting the box as in Fig. 129.

    The van described in Chapter V might be harnessed to a horse.

    [Illustration: FIG. 130]

    =Russian Sledge.= To make the sledge cut two runners out of brown paper (as A in Fig. 130), and gum on each side of a match-box. Make two brown-paper seats, C, D, and gum on. Cut part of the cover of a match-box as in =Fig. 131= to form the back of the sledge, B. Gum a brown-paper hood round this. A narrow strip of brown paper, E, is bent and fastened on as in diagram. A match or piece of cane, F, is gummed in front of the box, and to this the horses are harnessed. The horses are made as already described. A piece of silk or thread is looped round their necks and gummed under the straps of the outside horses, then tied to match stick, F.

    [Illustration: FIG. 131]

    This toy and some of those following will be found very useful to illustrate geography lessons.

    =A Reindeer Sledge= (Fig. 132). Make the reindeer as the other animals.

    For the sledge the bottom of a match-box, A, and a piece of brown paper are needed. The brown paper should be in length one and a half times the length of the match-box and broad enough to wrap round a match-box and cover every side except one narrow side. Fold the paper in two along C B. Draw the runners on the doubled paper and cut out as in Fig. 133. Cut the straps E O and G P along the top K F and L H; double them along M and N. Gum M K F and N L H to the bottom of the match-box, A. Do the same on the other side; pieces M K F, etc., may be cut shorter for convenience in gumming. A piece of brown paper forms the back, D (Fig. 132).

    Finally, a piece of paper just the size of the match-box can be pasted over A to make the sledge look tidy.

    [Illustration: FIG. 132]

    [Illustration: FIG. 133]

    [Illustration: FIG. 134]

    =The Howdah= on the elephant's back, the next model, is a simple one, though difficult for some little fingers. A is a little paper case, in which four halves of matches are glued, a square piece of paper with a little fringe cut round is gummed on the top (Fig. 134).

    =South African Trek waggon= (Fig. 135). This is made from two match-box covers, A and B, fastened together by a strip of paper; two match-boxes, C and D, are gummed to the top; part of one box, D, is cut away as in the figure. A strip of brown paper must be gummed along A and B, and a piece along the bottom of boxes C and D; the outsides of C and D may be left their ordinary blue colour. A piece of bluish-grey paper, E, is folded in three and gummed inside the sides of boxes C and D, as in figure; three or four divisions should be pencilled on each paper side.

    The wheels are cut out of cardboard--the large wheels should be somewhat larger than a penny, the small wheels a little smaller--these are gummed to the sides. F is a strip of brown paper, through which a piece of thread passes to fasten the waggon to a stick, G, gummed across the oxen's backs; this can be fastened to a stick, H, and so on. Five pairs of oxen should be yoked to the waggon in this way.

    [Illustration: FIG. 135]

    [Illustration: FIG. 136]

    =An Irish Jaunting-car= (Fig. 136). This toy is made from one match-box.

    First two cardboard wheels are cut out. These are gummed on each side of the match-box cover as in Fig. 137. The box is then cut in half (Fig.

    1. and each half gummed to the cover, e.g. E F G H (Fig. 138) is

    gummed to A B C D (=Fig. 137=).

    [Illustration: FIG. 137]

    [Illustration: FIG. 138]

    [Illustration: FIG. 139]

    [Illustration: FIG. 140]

    Two pieces of brown paper are bent as in Fig. 139, and gummed on, L M N O to H G J K, to form foot-rests. A piece of paper bent as in Fig. 140 and gummed on to the front closes up the hollow cover and forms the back of the driver's seat. A similar piece without the top, P, is gummed to the other end. Before putting on the seat the top may be covered with coloured paper, to represent the upholstered part of the car. Shafts of cardboard or cane are cut out and gummed underneath the seat to the cover and a cork horse is harnessed to them.

    [Illustration: FIG. 141]

    =A Mexican Cart with Ox Team.= A match-box is cut as shown in Fig. 141.

    Two pieces of narrow cardboard are cut the length of the box; holes are made in these and four matches are inserted in each. These matches are then glued inside the sides of the box.

    [Illustration: CORK ANIMALS]

    [Illustration: PLATE III NOAH'S ARK] While these matches are drying the wheels can be made. The wheels are very large (the diameter nearly equal to the length of the box); they must be shaded to represent solid wood. Two strips of cardboard, A and B, are gummed on as in the figure.

    A strip of brown paper gummed underneath the box forms the shaft, which can be gummed or tied to a match lying across the oxen, just behind their horns. This match is tied to the horns; this is the correct way of harnessing oxen.

    [Illustration: FIG. 142]

    =A Donkey with Panniers.= The panniers can be made of brown paper, in the same way as the mug described in Chapter IV; they are gummed to a strip of paper, which can be fastened to the donkey's back (Fig. 142).

    [Illustration: FIG. 143]

    [Illustration: FIG. 144]

    =A Persian Method of Travelling.= The bottoms of the panniers, X and Y (Fig. 143), are made from a small square of paper folded and cut as in Fig. 144. A is gummed on B and D on C; H on G and E on F. The hood is made of a piece of brown paper gummed inside the paper boxes X and Y.

    The panniers can be gummed to a strip of paper, the middle of which is gummed to the donkey's back.

    [Illustration: FIG. 145]

    =An Eskimo Sledge= (Fig. 145). The sledge is made of a match-box turned upside down; one end, A, is bent back as in diagram; the other end, B, is cut in half, bent outward and shaped as in diagram. A match, C, is glued to the ends, and to this is tied the thread that harnesses the dogs. A team consists of twelve dogs.

    [Illustration: FIG. 146]

    =A Seal= can be made from a cork as in Fig. 146, and placed on the sledge.

    [Illustration: FIG. 147]

    =A Belgian Milk-cart= (Fig. 147). Two pieces of cardboard, A, are gummed inside a match-box; cover the box with paper, colour it green and mark as in the figure. Small corks should be filed to resemble milk cans. The carts generally contain six, three large and three small cans; they are yellow in colour. Two pieces of cane, or two match sticks, D and C, are glued under the cart for shafts; the ends are slipped through pieces of looped paper gummed to the backs of the dogs. A piece of string tied to the ends of the shafts and round the dogs fastens them to the cart. The dogs are grey, and one is often smaller than the other.

    [Illustration: FIG. 148]

    =Russian Dog Sledge= (Fig. 149). This is made from a piece of paper folded along C D (Fig. 148); draw the sledge and cut out as in the diagram; bend along K L M. When opened out the sledge appears as in Fig.

    1. Runners A B and E F are fastened together by strips of paper.

    [Illustration: FIG. 149]

    A seat may be gummed over G and H. A piece of thread attached as in the figure harnesses the sledge to five dogs, made of corks.

    CHAPTER VIII

    MORE CORK TOYS

    [Illustration: FIG. 150]

    [Illustration: FIG. 151]

    [Illustration: FIG. 152]

    [Illustration: FIG. 153]

    [Illustration: FIG. 154]

    =Cork Boats.= Besides the submarine described in Chapter VI, many other boats can be made from corks, all of which will float well. The corks are joined together by pieces of wire passing through the middle. For the keel cut a narrow strip of lead (not more than 1/4 inch wide); point both ends, bend them up at right angles as in Fig. 150; make slits in the corks and push in the pointed ends of the lead. The keel is made more secure by driving pins or thin nails through the lead and the corks. The keel also helps to hold the corks firmly together and prevents them from slipping round on the connecting wire.

    =A Steamer= (Fig. 151). Select three corks, as uniform in size as possible. Cut and file part of their round surface quite flat as in Fig.

    1. Shape the bow and stern. The funnels are made of two small corks,

    fastened by pins. The masts consist of pieces of cane or thin sticks.

    =A Sailing-boat.= A very pretty little sailing-boat can be made, as in Fig. 153. The sails are of glazed lining. The edges of this do not fray, so the sails do not require hemming, and as they must be as light as possible, this is a great advantage.

    The gaff, A, is tied with thread to the mast, also the boom, B; both are pieces of cane, to which the mainsail, D, is sewn. The end of the boom is tied by cotton to a piece of wire at the stern, shaped as in Fig.

    1. Care must be taken that the lead keel is exactly in the middle, and

    that the sails and masts are not too heavy, otherwise the boat will blow over on its side.

    =A Paddle-boat.= Two pieces of cork pinned on each side of the steamer and cut as in Fig. 155, or even left round, make very realistic-looking paddle wheels. Other models, such as a dreadnought, a fishing smack, etc., are easily made.

    [Illustration: FIG. 155]

    =A Flying Proa of the Ladrones= (Fig. 156). These boats are used chiefly in East Indian waters. They are remarkable for their speed. Bow and stern are equally sharp pointed. One side of the proa is flat, and in a straight line from bow to stern (Fig. 157), but the other is rounded as in other vessels. The outrigger prevents the boat from turning over.

    [Illustration: FIG. 156]

    [Illustration: FIG. 157]

    In the model the outrigger is made of a cork fastened to the side of the boat by match sticks or pieces of cane.

    [Illustration: FIG. 158]

    [Illustration: FIG. 159]

    =An Eskimo Canoe= is very easily made by pointing the ends very sharply and hollowing out a hole in the centre (Fig. 158). Fig. 159 shows an =Egyptian Dahabieh=. For this boat it is better to use four corks, as two sails are carried.

    [Illustration: FIG. 160]

    In the =Double Canoe= (Fig. 160) the two boats are joined by a thin piece of wood, A. A slanting hole is drilled in A for the mast. Mast and yards are best made of cane. These little boats look wonderfully effective on the water.

    [Illustration: FIG. 161]

    [Illustration: FIG. 162]

    [Illustration: FIG. 163]

    [Illustration: FIG. 164]

    =Cork Wrestlers= (Fig. 165). This is a very amusing toy and is very easily made. Cut and file two corks to the shape shown in =Fig. 161=.

    Drill a hole through the shoulders (a a) and hips (b b), and flatten these for the limbs to work against. The arms and legs are made of cardboard. Cut out the legs as in =Fig. 162= and make holes in them.

    Pass a piece of stout wire through the hips and the holes in the legs and double the ends over, so that the legs will not slip off, but let them be loose enough to move freely.

    In shaping the legs make them bend slightly at the knee, as this makes the figures more life-like in their movements.

    The arms must be cut out in pairs as in =Fig. 163=. Make holes near the shoulders and one at c. Then fasten the arms to the body in the same way as the legs.

    The heads are made of cork, the eyes, mouth, etc., being marked in ink.

    Cut a slit across the neck and one across the top of the body. Fasten the head to the body by inserting, with the help of a pen-knife, a strip of calico into both these slits, so that the head is fairly close to the body (Fig. 164). The heads will move about as the figures wrestle. Paint the legs and arms.

    [Illustration: FIG. 165]

    Pass a piece of thread through the holes c. Hold one end of the thread steady and move the other about and you will cause the little figures to wrestle in a most life-like manner. If it is necessary to make the figures heavier, little pieces of lead may be glued to the feet.

    [Illustration: FIG. 166]

    [Illustration: FIG. 167]

    Similar little wrestlers (Fig. 167) can be made from two wooden clothes-pegs (Fig. 166). Cut the pegs in two along the dotted line. The upper part forms the head and body of a wrestler, and the lower parts are used for the legs. Drill holes through the bodies (at A in Fig. 166) and through the legs at the thin ends; fasten these to the body with wire.

    For the arms two pieces of thin, flat wood are necessary, about 3 inches in length. Bore holes at each end and in the middle, shape them roughly with a pen-knife to represent the joined hands of the wrestlers. Fix these pieces to the bodies and work them as described in the case of the cork wrestlers.

    =Swiss Musical Figures.= These amusing little toys were first invented by the Swiss. They are not musical in the sense that they produce any sound, but they dance about to music when placed on a piano lid, or on any flat surface which vibrates.

    The figures should be small and light and are easily cut out from a cork.

    [Illustration: FIG. 168]

    [Illustration: FIG. 169]

    Shape a cork as in Fig. 168 and hollow out the centre (A). Cut out arms and legs of thin cardboard. Fasten the legs to a piece of wire passing through the hollow in the cork (B C in Fig. 168), so that they hang loosely. Fasten the arms to the shoulders with wire. Make four tiny holes in the bottom rim, E, with a pin; get some stiff bristles (from an old clothes brush), glue them into the holes and when firm cut them level, so that the figure stands upright, with the feet a little above the ground. A head is then made of cork, and a little dress and bonnet of paper added. This little figure, resting on the bristles, is affected by the slightest vibration.

    Other figures, such as a soldier, a clown, or animals, such as a dancing bear or a monkey, can be made on the same principle.

    CHAPTER IX

    CARDBOARD AND PAPER SHIPS (PLATE IV)

    An interesting series of ships can be made of cardboard and paper. These ships can be used to illustrate the history lesson or to illustrate a lesson on the evolution of the ship.

    =Materials.= Cardboard of medium thickness (thin cardboard will bend and thick is difficult to cut), white paper--cartridge paper or ordinary exercise paper--and coloured paper or chalks, scissors and pen-knife, ruler.

    [Illustration: FIG. 170]

    [Illustration: CARDBOARD AND PAPER SHIPS SCHOONER (Part II, Chapter XIV)]

    [Illustration: PLATE IV CARDBOARD AND PAPER SHIPS]

    =The Viking Ship= (Fig. 170). Give the children oblong pieces of cardboard, A B C D, about 8-1/2 inches by 2-1/2 inches. A line, E F, drawn across the middle of the cardboard gives the top of the ship.

    The ship is then drawn on the cardboard, and the shaded part of the cardboard is cut away. Dragons' or serpents' heads are drawn on paper, cut out and gummed on to the stern and prow (as G and H); a tongue cut from red paper can be added to each dragon. (The 'dragon ships' were, as a rule, the largest, the 'serpent ships' being smaller and better adapted to sailing.) The mast is cut out of cardboard and gummed behind the ship; the sail is cut out of paper and gummed to the mast.

    The shields are cut out of cardboard and pasted along the sides. The ship may be painted white, blue, red, or any combination of colours; the warriors' shields were also of different colours. The sails were generally in coloured stripes, blue and white or red and white. Masts brown. For teachers who want to be historically accurate the following notes on the viking ship may be useful.

    The viking ship (from ninth century on-wards) was clincher-built, caulked with hair, and iron fastened. One ship we know to have been 78 feet long by 15-1/2 feet of extreme breadth; the ships varied in length from 50 to 150 feet. They had from twelve to thirty-five seats for rowers. Generally both ends of the vessel were alike, so that it could be steered from either end by the paddle, which was used everywhere until the invention of the rudder.

    Standards and pennants were used, and possibly the two-armed iron anchor (for the Romans used it), so the children can cut out pennants and anchors for their ships.

    Children delight in naming their ships and should be given some of the 'real' old names to choose from. These old names generally referred to the figure-head, which was of wood or metal, in the shape of the head of a dragon, deer, bird or other animal--e.g. Dragon, Serpent, Raven, Deer of the Surf, Sea-king's Deer, Horse of the Sea, Sea-bird, etc. To support the boat two pieces of cardboard are cut and folded, as N P O Q (Fig. 171). The cardboard must be half cut with a pen-knife along the line R S, so that it can be bent easily.

    [Illustration: FIG. 171]

    The portion N R P S is gummed to the back of the ship, R S O Q bent at right angles to N P R S forms the support, with corner S T Q cut off, so that the ship tilts a little backward.

    =A Phoenician Warship=, 480 B.C. (Fig. 172). This is made, as the viking ship, from oblong A B C D; pieces of paper, E and F, with railings drawn on them, are gummed on each end; a stern ornament, G, is cut out of paper and gummed at one end. (When a vessel was captured in olden days this was kept as a trophy.)

    [Illustration: FIG. 172]

    Small circles are drawn along the side of the ship to represent the holes for the oars, or holes may be made in the cardboard and matches or strips of cardboard passed through for oars.

    A device of the sun (common to Carthaginian vessels) should be drawn on the sail and prow. The ship can be coloured in stripes yellow and red, with one blue band near the top; stern ornament red and yellow; sail yellow with red sun.

    The ships represented in Fig. 173 and in Plate IV are made in the same way. In all these a piece of cardboard forms the foundation. Masts, high funnels, anything likely to bend, should also be cut from cardboard, but sails, stern or prow ornaments, railings, flags, etc., are best cut out of paper. By means of a needle and cotton, rigging can be added to the ships.

    [Illustration: FIG. 173]

    =A Tudor Ship= (Fig. 173). Tudor ships are difficult, because of their elaborate and lofty forecastle and poops. A simplified one is shown in the figure. This can be easily managed by the children if an oblong A B C D is given them, divided into six parts lengthways, or if the oblong E B F D is given them. In the latter case the poop and forecastle are cut out of paper and gummed on separately. The ship is coloured red, yellow and blue, the sails white. The ship may be decorated with many flags.

    The =Cunarder= has red funnels, with a black band at the top and two black lines underneath.

    The =Super-Dreadnought= should be coloured dark grey. Children will delight to make, in a similar way, a Roman galley, Columbus' Santa Maria, in which he discovered America, the Black Prince, in which Sir Philip Sidney's body was carried to England, Britain's first =Ironclad=, etc.

    Instead of cardboard supports pieces of wood (about 1/4 inch thick, 1 inch wide, the length equal to that of the ship) can be half sawn through along the middle line and the ship inserted in this slit; or pieces of wood (cubes) may be glued to the back. In the first case the surface of the wood should be painted blue to represent water.

    CHAPTER X

    CARDBOARD AND PAPER TOYS INVOLVING USE OF RULER, SET-SQUARE, SCISSORS,

    AND KNIFE

    =Materials.= The cardboard used should not be too thick; medium thickness is best (threepence a sheet). Almost any paper that is not too thin can be used for making hinges. All kinds of cardboard boxes will be found of great use in making shops, engines, etc.

    =Tools.= Scissors with round points are safer for children to use, though perhaps not quite so suitable for the work.

    Knives. For little children the carton knife, consisting of a small blade projecting not more than a quarter of an inch from the handle, is the best, as the smallness of the blade does much to prevent the children cutting their fingers.

    For older children the "London" or "Leipsic" pattern is suitable, or they can use their pen-knives. These can be sharpened quite well on an ordinary knifeboard.

    Rulers. The "non-slip" safety ruler is the best. It grips the paper well, and the depression between the raised edges enables the children to hold it steady when cutting.

    =Adhesives.= Higgins' vegetable glue or seccotine.

    [Illustration: FIG. 174]

    =A Pigeon-house= (Fig. 178). On a piece of cartridge paper draw an oblong 8 inches by 2 inches, and divide it into four squares (Fig. 174).

    On the top of each construct an equilateral triangle. Make a flange about 1/4 inch on the sides of the triangles, as shown in Fig. 174, and on the sides of the squares. Cut and fold back the doorways. Fold and gum together. Flanges 1, 2, 3, 4 should be folded in. Draw and cut out a square, side 2-1/2 inches (Fig. 175); gum the house on to this.

    [Illustration: FIG. 175]

    For the post draw an oblong 8 inches by 2-1/2 inches (Fig. 177). Fold into five lengths (1/2 inch wide). Draw J K and L M 1/2 inch from the ends of oblong E F G H. Cut along the lines, cut off the shaded portions, and fold along the dotted lines. Gum the two outer portions over each other to make a four-sided post.

    [Illustration: FIG. 176]

    [Illustration: FIG. 177]

    [Illustration: FIG. 178]

    For the base cut a square, the side 3 inches (Fig. 176), and to this gum the flanges at L M. Gum the house to the flanges at J K. To make the top stronger, a second square (the side 2-1/2 inches) can be cut; the flanges at L M are gummed to this, and then the house is fastened on.

    Other easily made farmhouse models are a hen-coop, a barn, a pigsty, the farmhouse itself, etc.

    =The Noah's Ark= (Plate III). As this is a fairly large toy, it is best made from separate pieces of cardboard hinged together by strips of paper. If it is cut from one or two pieces, the size of the cardboard is somewhat unmanageable.

    The following Noah's Ark is of a suitable size for holding cork animals.

    Two pieces of cardboard are cut, 8-1/2 inches by 4 inches (Fig. 179).

    Cut two other pieces, 3-1/2 inches by 6 inches. Mark and cut these out as A and C. In one side, A, a door is cut. A paper-fastener is put in to form the handle. On the other sides windows may be drawn and coloured.

    When fastening the pieces together the children must be very careful that the bend of the hinge is straight.

    [Illustration: FIG. 179]

    Fig. 179 shows the pieces of the Noah's Ark hinged together. The children will find it easier if they paste the hinges on A and C first and let them dry thoroughly; then they can fasten A to B and C to B and D, and lastly D to A, but B must be firmly hinged to A before C is attached, and so on with the other parts. However, there is plenty of work to be done while the children are waiting for the paste to dry. (In their eagerness to finish toys the children often want to paste or glue too many things together at once.)

    For the bottom of the ark a piece of cardboard, 13-1/2 inches by 5 inches, is cut and pointed at each end.

    For the roof the children can get the measurements themselves. The long side of the ark is 8-1/2 inches, so that if the roof projects 1/2 inch on each side of this the length will be 9-1/2 inches. They must measure E F (Fig. 179); this will be about 2-1/2 inches. Now, the roof must cover E F and F G and project about a 1/2 inch beyond E and G, so that the width of the roof must be 6 inches. Therefore, they must cut a piece of cardboard 9-1/2 inches by 6 inches. Down the middle of this a half cut is made, along which the cardboard is folded.

    A stronger method is to cut the roof in half and hinge the two pieces together by a piece of paper cut and coloured to represent tiles; thus the roof will open and shut easily without breaking. The roof can be coloured or covered with blue paper.

    When the body of the ark is complete, it must be placed on to the bottom, so that it stands in the middle. Two hinges on each long side will be sufficient to keep the ark steady, but hinges can also be made for the shorter sides. The hinges are more easily put on the outside, but would look neater if fastened inside the ark.

    One half of the roof is fastened by paper hinges to three sides of the ark; the other half opens and shuts.

    A strip of cardboard, the width of the door, is cut to form a gangway for the animals to enter the ark. Across this matches should be glued.

    [Illustration: FIG. 180]

    [Illustration: FIG. 181]

    Very effective animals can be made from corks, as explained in Chapter VII. Easily made animals are the elephant, camel, giraffe, horse and donkey. The children will suggest other possible animals, e.g. a hedgehog, or porcupine, a small cork with pins stuck in it, etc.

    Noah and his wife and children can be made from corks. A cork is filed round the narrowest end to form the head (Fig. 180). Eyes, mouth, etc., can be marked in ink. Round Noah is pasted a piece of coloured paper to form a cloak, open in front; this, with the help of match sticks for legs, enables him to stand. Half matches form the arms. A piece of round paper gummed to the head forms a hat.

    Noah's wife (Fig. 181) has a piece of coloured paper round her body to form a skirt, on which she stands.

    =A Dog Kennel= (Fig. 182). This toy is made of either cardboard or stiff paper, on lines similar to those of the Noah's Ark.

    The bottom and the sides can be made from one piece, 7-1/2 inches by 4 inches (Fig. 183). Half cuts are made along H A and B C. In fixing the front of the kennel it will be noticed that the bottom and the sides project beyond it. The back portion can be fixed to coincide with the edges of the bottom and sides. The roof can be measured and fixed as described in the Noah's Ark. Planks can be indicated by drawing lines across the sides and the roof. The kennel may be fastened to two strips of wood, Y and X.

    [Illustration: FIG. 182]

    [Illustration: FIG. 183]

    =A Shop.= This can be made like the Noah's Ark, except that the bottom will, of course, be a rectangle, and one long side must be left open. The children can turn cardboard boxes of different kinds into shops quite easily. Perhaps one of the easiest shops to make is the butcher's. The inside can be covered with white paper, upon which the children have drawn tiles in blue or green pencil. A little paying-desk (Fig. 184) can be made of brown paper and gummed to one of the walls.

    Tables can be made of cardboard, or of wood if the children have begun woodwork. Joints of meat drawn on cardboard, and coloured with red pencil, look very realistic when cut out. To hang these the children can hammer nails half way into a piece of stripwood and glue it to the wall.

    The joints can be attached to the nails by pieces of string.

    [Illustration: FIG. 184]

    Other toys that can be made in a similar way from stiff paper or cardboard are castles, houses, a sentry-box.

    =A Wheelbarrow= (Fig. 188). This toy is made of cardboard of medium thickness. Fig. 185 shows how the bottom and the sides are cut out from one piece. Half cuts are made along the dotted lines. Small holes are made at D and C for the axle of the wheel.

    Figs. 186 and 187 show the two ends of the barrow. Before placing them in position a little seccotine should be put round their edges; with the help of this and the slits they will be quite firm.

    The wheel is about 7/8 inches in radius. It is mounted on an axle made of a rounded match stick or piece of cane. Two small pieces of cork can be filed to the shape of E and F in Fig. 189, and holes made through them. They are then slipped on to the axle on each side of the wheel (Fig. 189) to prevent the latter from wobbling. The legs are made of strips of cardboard about 1/4 inch wide and 2-1/2 inches long (Fig. 190).

    A very slight half cut is made along the dotted line, so that part of the leg, K, may be bent straight when H is gummed to the side of the wheelbarrow.

    Fig. 191 shows another method of making the legs. A half cut is made along the dotted line, H is bent back at right angles to K and is gummed to the side of the barrow. The slant of the dotted line is the same as the slant of the sides of A in Fig. 186.

    [Illustration: FIG. 185]

    [Illustration: FIG. 186]

    [Illustration: FIG. 187]

    [Illustration: FIG. 188]

    [Illustration: FIG. 189]

    [Illustration: FIG. 190]

    [Illustration: FIG. 191]

    This toy could also be made of three-ply wood with a fret-saw. The sides and bottom would then have to be cut in three separate pieces.

    CHAPTER XI

    SIMPLE WOODWORK

    Children as young as seven can begin woodwork, but the little strength they possess for sawing makes it necessary to give them prepared wood, called stripwood. There is no need, however, to begin woodwork in too great a hurry, so many are the toys which the children can make with match-boxes, corks, paper and files, and the more familiar the child gets with his ruler and with simple measurements, the better able he is to saw to advantage. Woodwork may well be postponed to the age of eight or nine, then the child can begin to measure accurately and be introduced by degrees to the mysteries of set-squares, try-squares and T-squares.

    [Illustration: FIG. 192]

    The following tools are necessary when beginning easy woodwork with children from seven to ten years of age; other tools, described in Part II, can be added as the children advance in age and in ambition:

    1. Bench-hooks, against which children can press their strips of wood

    and hold them firmly. A simple one is shown in Fig. 192. C is a piece of hard wood about 8 inches square, A is a strip of hard wood against which the child can hold her wood, B is a strip of wood that presses against the table.

    1. Try-squares.
    1. A brass-back saw with a blade about 6 inches long.
    1. A light hammer.
    1. Files--these are very cheap. Some must be round; the others should be

    8-inch files, 1/2 cut (one safe edge).

    1. Bradawls (or meat skewers).
    1. A pair of pincers.

    Other materials required will be liquid glue, sand-paper, nails--useful ones are 3/4 and 1/2 veneer pins.

    With regard to wood, children as young as seven should be given prepared lengths (schools are commonly supplied with the so-called satin walnut, machine-planed, see next chapter), from which they can saw portions for making simple objects, such as picture frames, ladders, gates, objects which consist of different lengths of wood nailed across each other.

    A word of advice is necessary with regard to sand-paper; this varies in coarseness from No. 00 to No. 3, every sheet being stamped. It should never be used until all work with edged tools is finished, as the particles of sand left on the surface dull an edged tool. When using sand-paper on a flat surface it should be wrapped round a rectangular block of wood. All corners should be left as sharp as they are left by the edged tools and rarely sand-papered. Lastly, always sand-paper with the grain.

    The bradawl varies in size or diameter of the steel shaft from 1/16 inch to 1/8 inch or 3/16 inch. The legitimate purpose of the bradawl is to bore holes in wood so as to ensure the passage of a nail or screw in the right direction, and to facilitate its entrance into the wood.

    Three words of advice might be remembered by teachers beginning woodwork:

    (1) Don't begin it too soon; don't begin woodwork with children of seven and eight because others do; wait until they are really ready, until they have the necessary strength. There is plenty for them to do in measuring and cutting out paper toys and toys of thin cardboard; they will enjoy the woodwork the more when it comes.

    (2) Simple doll's furniture, chairs and tables, are not easy for the child to make.

    (3) Leave behind as soon as possible prepared stripwood and its everlasting gates, railings, bridges, or picture frames.

    Suggestions for Teachers who are beginning Woodwork with their Forms. Let the children measure out and cut a square of wood to support the merry-go-round, make the stand for the swinging boats and great wheel (Chapter XIV). Make the Noah's Ark and dog kennel described in Chapter X.

    A very simple toy for beginners is a =Flat-bottomed Boat=. A flat, oblong piece of wood is marked out as in Fig. 193, the bow and stern are cut as indicated; the three dots down the central line indicate the position of the masts. These can be made of wooden meat skewers or of pieces of strip wood (1/4" × 1/4") rounded toward the top.

    [Illustration: FIG. 193]

    Nails are driven through the bottom of the boat so that they project about half an inch above the surface; on to these points the masts are hammered, having first had a little glue applied to the base; nails are hammered carefully round the sides for railings, with cotton intertwined. Funnels of red paper, little squares of wood for cabins, paper or cardboard lifebuoys and anchors, a captain's bridge, etc., may be added (see Fig. 194).

    [Illustration: FIG. 194]

    Children delight in tying thread from mast to mast (a ridge must be filed round the tops of the masts to keep the cotton from slipping down) and in decorating this thread with flags.

    Instead of nails, stripwood (1/4" × 1/4") may be glued or nailed along the sides, and a piece of wood nailed over the bow (Fig. 195). These boats will float on water if they are not too heavily laden with cabins, etc. Fig. 196 shows a fishing-boat complete.

    [Illustration: FIG. 195]

    A reel will be found very useful as an anvil when driving the nails through the bottom of the boat to hold the masts. The child should hold his piece of wood--through which he is driving a nail--in such a position that when the point comes through the wood, the nail makes its passage down the hole in the middle of the reel. As soon as the point has been driven through to a certain distance, the child can lift up his wood and examine--and if need be correct--the direction of the nail before fixing on the mast.

    [Illustration: FIG. 196]

    Hammering must be done with the hammer held with the hand well back from the head, and each blow struck so that the flat face of the hammer falls exactly upon the head of the nail. Gentle but firm blows are necessary; heavy blows are likely to bend the nails. All bent nails should be at once drawn out.

    CHAPTER XII

    MATERIALS

    =Nails.= The nails used in the making of the toys described in the following chapters are made of very fine wire, with fine points. The wire commonly used for such nails is 17 gauge, but a finer gauge (21) is better for light woodwork, for it does not split the wood so easily. The nails vary in length from 1/4 inch to 2 inches, increasing by eighths of an inch. The most useful sizes are veneer pins 1/2 inch in length and 3/4 inch in length.

    Panel pins have small heads.

    =Liquid Glue.= Though this is dearer than ordinary glue (it can be obtained in small bottles, price 4-1/2d), it is always ready for use, and is not affected by exposure to the air, except that it thickens and hardens from evaporation. If spread thinly over the wood it holds the various pieces firmly together. When fastening different pieces of wood together it is well, whenever possible, both to glue and nail them.

    =Wood.= (1) Satin walnut is one of the easiest woods to work, and is adapted for a wide range of work, but it is liable to warp and twist badly unless properly seasoned.

    For handwork in school, and for toy-making generally, satin walnut machine-planed can be had in the following useful sizes. They are supplied in lengths of 2 feet and are done up in bundles of 100.

    (a) 2' × 1/4" × 1/4" about 2s. 9d. per bundle.
    (b) 2' × 1/4" × 1/2" " 3s. " "
    (c) 2' × 1/2" × 1/2" " 3s. 3d. " "
    (d) 2' × 1/4" × 1" " 4s. " "
    2' × 1/4" × 4" " 9s. " "

    In the toys described in the following chapters satin walnut lengths (a), (b), (c), and (d) are referred to simply as stripwood.

    (2) Round dowel rods in beech or birch 3/16 inch to 7/8 inch diameter and 36 inches long are useful for axles and for the perches for the swinging animals, etc. These dowel rods cost 3s. to 10s. per 100. Dowels are made by planing up a strip square in section, then planing off the corners, and finally the resulting eight corners. They are now nearly round, and can be made quite so by hammering them through a hole in a piece of hard wood or metal.

    (3) Sawn laths such as builders use are perhaps the cheapest material that it is possible to get. These can be got from builders' and timber-merchants' yards at a cost of about 9d. to 1s. per bundle of 100.

    Each lath is 3' 6" × 1" × 3/16".

    (4) "Three-ply" is composed of three thin layers of wood glued together under pressure. The grain of the centre layer is laid at right angles to that of the other two, so as to give additional strength and to avoid warping. "Three-ply" will not split easily and should be used for the jointed animals and swinging animals described in Chapter XX.

    Ply-wood is usually sold in thicknesses varying from 1/8 inch to 1/4 inch. Price of three-ply boards in large squares for cutting up:

    1/8 in. thick, 47" × 38", 3/4d. per sq. foot.
    3/16 " 53" × 34", 1d. " "
    1/4 " 72" × 48", 1-3/4d. " "

    =Match Stales.= These are sometimes useful in toy-making, though ordinary matches that have been used generally serve as well. Match stales may be obtained from Messrs Bryant & May's, Fairfield Works, Bow, E., at 1s. per bundle (about 1500 to the bundle). These are supplied without brimstone, 4-5/8 inches long, and thicker than the matches in common use.

    Most of the wood so far described is prepared wood (with the exception of builders' laths), and is ready for use at once; it has merely to be sawn to the right length or the right size. But it is well to get the children away as soon as possible from dependence upon this "prepared material" and to encourage them to use "waste material."

    If there is a kitchen or tuck shop in connexion with the school this will supply the children with useful wooden and cardboard boxes of various sizes. The wooden boxes in which Fry's, Cadbury's, etc., chocolates are packed are most useful in toy-making. The wood is easy to saw and fairly free from knots.

    If no school kitchen or tuck shop exists a grocer, for a few pence, will supply a delightful collection of wooden boxes, sweet-boxes, soap-boxes, boxes that have contained bovril, etc. The greater part of every wooden toy in this book has been made from materials such as these.

    To avoid expense one should begin at once to collect useful boxes; this adds to the enjoyment of toy-making. A tobacconist will often give away his cigar-boxes, the wood of which is a pretty brown colour and very useful. Unfortunately, it is sometimes so thin that it is very liable to split. It is difficult, too, to get the paper off some boxes, and the children who resort to washing, scrubbing, and sometimes boiling (!) the wood do not improve it. However, all waste wood has to be prepared in some way; generally the file and sand-paper will make it ready for use.

    Other materials that are invaluable to the toy-maker and should be carefully preserved are old broom handles, reels, and the round rods of various sizes that one often comes across.

    Lead plays an important part in many toys; sheet lead can be bought in pennyworths; lead buttons can also be bought. Chains are also useful (for example, in Part II, in the drawbridge, the siege tower, etc.), so toy watch chains or any odd pieces should be preserved, as these chains look more effective than those made of wire. Very good chain can be bought from an ironmonger's--price, 3d. a yard.

    CHAPTER XIII

    SOME DIFFICULTIES IN TOY-MAKING

    I. =Gluing.= Generally when pieces of wood are fastened together, both glue and nails should be used; the glue prevents the wood from revolving on the nails, and the nails hold when sometimes a sudden jar will cause pieces of wood that are glued to separate. However, if glueing be well done, it will serve well without nailing, and it is often convenient to use glue only when making small toys or when adding a piece of wood to a delicate toy that will not stand the shock of the hammer. To apply glue so that the pieces of wood that it fastens shall hold together permanently, the following points should be borne in mind:

    (1) The layer of glue should be so thin that the seam will scarcely be seen.

    (2) The glue must be perfectly free from sawdust, shavings, etc., and so must the wood.

    (3) Glue must be evenly and thinly applied to both the surfaces that are to be joined.

    (4) The surfaces to be joined must be perfectly smooth.

    (5) Time must be given for the glue to dry. Children often want to touch too soon.

    II. =Nailing.= Generally in nailing holes should first be made for the nail with a fine bradawl or drill. The holes for the nails should be made just large enough to allow them to stand upright in them without being held. The points or heads of nails that project should always be filed away.

    III. =Sand-papering.= A holder for sand-paper should be used, as by simply holding the sheet in the fingers it is impossible to retain the perfect flatness of the surface. A holder can be bought for twopence.

    Sand-paper should always be applied with a very light pressure, lest it wear away the surface unequally.

    IV. =Filing.= Filing should be resorted to as little as possible. Avoid filing the sawn edges. Children often saw carelessly, relying on the file to remedy defects. The file, however, is useful when cutting discs, to make the circle perfect. Round files are very useful in finishing off round holes and in enlarging them when required. The sharp edges of triangular files can be used for making notches, such as those in the deck-chair (Part II, Chapter III).

    V. =The Making of Wheels.= The child toy-maker often finds wheels somewhat of a problem. There are, however, several ways of making or getting them.

    [Illustration: FIG. 197]

    (1) Small reels make good wheels for trams, motor-cars or trains. They require no sawing. Fig. 197 shows how they are fastened on. A is a block of wood glued and nailed on to the axle, B C, which is made of stripwood, 1/4 × 1/4 inch, or 1/2 × 1/4 inch; the ends, F B and G C, are rounded so that the reels can revolve easily on them. The bottom of the car is glued to the block. The reels can be placed quite under the bottom of the car, as in diagram, or they can project. For a train the wheels should be placed underneath.

    (2) Large reels may be sawn into several thicknesses. These make excellent wheels, but are very difficult to saw even with a mitre block.

    It is hard to hold them steady and there is some danger of the children sawing their fingers.

    (3) Broom handles, round rods, etc., are easily sawn up and make excellent wheels. Holes have to be drilled through them and enlarged with round file for the axle, or a hole the right size can be made at once with the brace and bit. (For use of which see Part II.)

    (4) Wheels can be made with the brace and centre-bit. The way for the centre-bit must be prepared by using a small-sized pin-bit. The wood must be laid perfectly flat, the brace and bit held perfectly perpendicular, only a little pressure applied upon the knob and the crank turned slowly. The boring must be done half way through from each side of the wood, and this will liberate a disc of wood 1 inch in diameter, or 1-1/4 inch, according to the size of the centre-bit.

    (5) There is a little instrument sold called a circle-cutter (price, 2s.), designed for cutting small circular pieces of wood from satin walnut board. It is so constructed that it will cut circles of any size up to 5 inches in diameter. This, however, is difficult for children to use.

    (6) For large wheels or table-tops a circle can be drawn in a square, the corners sawn off, the obtuse corners sawn off again and then filed perfectly round. This is rather a laborious method, but quite successful. Holes can be made in the centre with a bradawl and enlarged with a round file.

    (7) Cardboard Wheels. Wheels can be cut out of cardboard with scissors and pen-knife (the latter is necessary only if the spokes are to be cut out). If several cardboard wheels of the same size are gummed together, a wheel strong enough for any toy in this book can be made. The edges can be filed to make them perfectly even. Cardboard washers prevent the wheels from wobbling.

    (8) The fret-saw (see Part II) is very useful for making wheels.

    (9) The wooden tops of gloy bottles make very good wheels indeed (especially for motor-cars). They are ready for use at once, as they have a hole in the centre. Also the tin tops of Le Page's liquid glue make excellent small wheels; a hole can easily be made in the centre by means of a hammer and a long nail or the pin stopper of a tube of seccotine.

    (10) Wheels can be bought. A sheet of four wheels costs a penny. This is the least satisfactory course.

    Of the various ways of making wheels described above, the methods best suited to little ones are (1), (3), (6), (7), and (9). The axles should be narrow strips of wood, with the ends rounded. Round rods do not make good axles, because they cannot be fastened securely to the bottom of the vehicle, the nailing being a difficult matter for the children. In fastening the axles to vans, carts, etc., there is no need for block A (Fig. 197); the latter is only introduced when the wheels have to be under the vehicle; in other cases the axle can be glued and nailed directly to the bottom.

    =Colouring the Finished Toy.= A well-made toy is beautiful without paint, which is often used merely to hide bad work and give a false appearance of finish. Children generally like the wooden toys, which they have made, uncoloured, until the grown-up person suggests paint.

    However, some toys should be coloured; for example, the swinging animals described in Chapter XX. If the wood has been well sand-papered water-colour paints can be used. Older children can use oil paints or penny tins of enamel. But let the children realise the beauty of plain wood; the drawbridge in Part II is far more effective in white wood, with the stones marked out in pencil or crayon, than if painted.

    CHAPTER XIV

    MERRY-GO-ROUND, SWINGING BOATS, AND GREAT WHEEL

    A toy children delight to make is the =Merry-go-round= (Plate V). It has been made successfully by children from six to twelve. A square piece of stout cardboard (10-inch side) forms the bottom; this can be covered with brown paper or coloured paper. A reel is glued in the middle. Into this reel a stick (about 11 inches long) is fastened securely. Another piece of cardboard is cut round (diameter, 10 inches), and has a reel glued in the middle; this reel fits on the top of the stick and must turn freely.

    If the stick is square the top must be rounded to fit the reel. A handle for turning the top can be made from a reel, a piece of cork filed round or a piece of wood. Cork horses, six or eight in number, are made as described in Chapter VII. Paper bands of various colours are gummed round the middle of each horse. These horses are fastened to the top disc by pieces of cane, which may be gummed into the top disc, or simply passed through the holes and bent over.

    [Illustration: FIG. 198]

    [Illustration: FIG. 199]

    Paper boys and girls can be cut out to ride on the horses. They will sit on quite steadily if cut out as in Fig. 199. A piece of paper is folded in two along A B, and a little sailor boy drawn; the figure is cut out, the two halves remaining joined along C D. Both sides should be suitably coloured. The figure will be found to have four hands; one raised one on one side, and one lower one on the other, should be cut away. The heads are then gummed together. When placed on horseback the sailor may have his arms folded round the cane. Little girls in sun-bonnets can be cut out in the same way.

    [Illustration: FIG. 200]

    Fig. 198 shows a very simple merry-go-round made by a large class, and more suited to the work of a large form than the first one described.

    Two square pieces of cardboard (3-1/2-inch sides) form the top and bottom. Small reels are glued on as in the first merry-go-round.

    Four pieces of stout cane are pushed into holes in the top piece of cardboard, and the bottom of each piece of cane is split so that it holds a horse cut out of paper.

    The children themselves will think of various ways of altering and improving this toy. Fig. 200 shows how match-boxes may be hung round for cars; match-boxes and horses may also be hung alternately. The children delight in decorating the top of their merry-go-round and the stick with coloured paper.

    [Illustration: FIG. 201]

    Older children (nine to twelve) like to make the bottom and top of wood; in this case the top may be octagonal in shape. The central pillar, instead of being supported by a reel, can then be fastened as in Fig. 201, by four triangular supports (of which only two are shown).

    =Swinging Boats= (Plate VI). This is another simple and effective toy that little ones can make and play with. The wooden stand can only be made by children of eight and older; a simpler stand can have a cardboard bottom, the supports being reels, the posts stripwood (1/4" × 1/4"), sand-papered to fit reels, and the cross-beam a strip of cardboard with holes in it.

    The boats are match-boxes. Four strips of thick paper, all equal in length (a little longer than the match-box), are cut out and gummed inside the box, as A B, C D, etc., in Fig. 202. A match stick, H, passes through these strips of paper where they cross and projects on each side. Pieces of thread are tied to each end of the projecting ends.

    These threads fasten the car to the cross-beam.

    [Illustration: PLATE V A MERRY-GO-ROUND]

    [Illustration: FIG. 202]

    Paper seats should be put in the box; it can be covered with coloured paper, and the strips A B, E F, etc., either chalked or covered with coloured paper. The children delight in making and decorating these swinging boats, and then swinging little dolls.

    =A Great Wheel= (Plate VI). Two circular pieces of cardboard are glued to a large reel; four match sticks are fastened into holes opposite each other, and to these match-boxes are attached, as explained in the previous toy. A round rod or wooden skewer passes through the reel and through two holes drilled in the wooden supports of the stand. A slight touch will set the wheel spinning. Before putting the wheel together, the sides may be painted.

    [Illustration: FIG. 203]

    Fig. 203 shows another possible shape for the top of the supports. This hollow can be quite easily filed out with a round file. Older children might like to make a pulley, as shown in Fig. 204, by means of which the wheel can be turned. The pulley wheels, A and B, are each made of three cardboard circles gummed together, the inner one, in both cases, being of smaller diameter. A is glued to axle F G.

    [Illustration: FIG. 204]

    A smaller axle, J H, is fixed into a hole in the support lower down. A hole is made in the wheel, B, into which a match is glued for a handle.

    B must turn freely on the axle, J H, and is prevented from slipping off by a nail driven through the axle. A small elastic band connects the two wheels.

    CHAPTER XV

    FLYING AIRSHIPS, GONDOLAS, AND BIRDS (PLATE VI)

    These toys are made in a somewhat similar manner to the merry-go-round.

    Get a large reel (diameter about 1-1/2 inches). Next saw a piece of stripwood, A B, 1/4" × 1/4" × 12-1/4". Glue and nail to the ends of this cross-pieces of the same stripwood, 4-1/2 inches long. Make holes for nails with a fine drill, otherwise the stripwood may split. Glue and nail A B across the top of the reel as in Fig. 205.

    [Illustration: FIG. 205]

    Cut two pieces of stripwood, 1/4" × 1/4" × 6". Glue and nail cross-pieces 4-1/4 inches long to one end of each of these. Glue and nail them to the reel as in figure.

    Next glue and nail another large reel to the centre of a board about 4 inches by 5-3/4 inches. Get a dowel rod that will fit the reels (diameter about 1/4 inch), or file the ends of a square stick to fit; this central pillar should be about 13 inches high. Glue this pillar into the reel on the board and fit the other reel with the cross-pieces on the top of the pillar.

    [Illustration: FIG. 206]

    The cars must next be made; they will hang by two strings from the ends of the cross-pieces (Fig. 206). Grooves may be filed round the ends of the cross-pieces for tying the cotton, or holes can be drilled in the ends before the cross-pieces are fastened on.

    The cars are made of paper, cardboard or wood. Fig. 207 shows the pattern of a car. It should be 4-1/2 inches long and 2 inches wide.

    The dotted lines show where the paper is to be bent, or in the case of cardboard half cut and bent.

    The width of the bottom of the car is 2 inches, the roof 2-3/4 inches; this allows for bending, and makes a curved roof. The doors can be made to meet if desired; in this case each door will be 1 inch wide.

    Five, four or three windows may be cut in the sides, and windows in the doors.

    Paper seats may be fitted inside.

    To hang the car a rod is cut, about 5 inches long, E F in Fig. 206, and grooves are filed at each end. This is glued to the top of the car, with the ends projecting. Pieces of cotton attach the beam E F to the cross-piece. (Length of cotton, about 7 inches.)

    [Illustration: FIG. 207]

    A reel may be glued on the top of the arms for turning the airships; cotton may be wound round this, and when pulled causes the cars to revolve. Into the hole of the top reel may be inserted a stick bearing a flag.

    Paint the cars according to taste.

    When the top reel is set spinning the cars fly round and outward in a delightful manner, gradually returning to a vertical position as the speed lessens.

    =Gondolas.= For the cars gondolas may be substituted, as in Fig. 208.

    These gondolas form simple and effective paper toys, even if not attached to revolving arms.

    Draw on stout paper or cardboard and cut out the two sides, A A, as in Fig. 208. The total length of the boat should be 9 inches.

    Next draw a line on a piece of paper, a´ b´ in Fig. 209, the same length as a b in Fig. 208. Divide the line into three parts at c´ and d´. a´ c´ represents the length a c in Fig. 208; c´ d´ (not shown to scale), the length of the cabin c d. If the full length of the gondola is 9 inches, the length a b will be about 8-1/2 inches, and the length a c should be 3 inches; this makes the length of the cabin, c d, about 1-3/4 inches. Draw two lines at c´ and d´ at right angles to a´ b´. Make e f and g h (Fig.

    209) equal to the widest part of the gondola. (If the length of 9 inches has been decided on, the width of the gondola should be 1-1/4 inches.) Complete triangles a´ f e and g b´ h as in Fig. 209; draw flanges as in diagram and cut out. Two other triangles exactly the same size with flanges will be required.

    [Illustration: FIG. 208]

    [Illustration: FIG. 209]

    Now fasten together the bows, B, and the sterns, C, of the sides, A A (Fig. 208), with seccotine, taking care that no gum comes below the line a b. Gum the triangle a´ f e (Fig. 209) to the sides, A A, as in Fig. 208. Point a must come at the very end of the sides A, and the surface of a f e forms the deck. Gum triangle g h b´ to the sides, A, in the same way (Fig. 208). Now gum the other two triangles to the bottom of the gondola. Their apexes will probably come at about K and M in Fig. 208.

    The positions of these points can be determined by finding out at what spot the triangle brings the sides A A closely together; try to keep them as far from ends a and b as possible.

    [Illustration: SWINGING BOATS AND GREAT WHEEL

    (Chapter XIV)]

    [Illustration: PLATE VI FLYING GONDOLAS, ETC.]

    The space left between the two bottom triangles has a piece of paper gummed over it.

    [Illustration: FIG. 210]

    Fig. 210 shows the shape of the cabin and the measurements required for a cabin for a gondola of 9 inches. Four gondolas should be made. They should be painted black and red, or black and yellow, according to taste.

    The gondolas are hung from cross-pieces, like the airships, but the arms should be 12-1/2 inches, and the cross-pieces 9 inches; the strings must be of different lengths, since the bow is higher than the stern. Seats may be put in the cabins if desired.

    [Illustration: FIG. 211]

    =Flying Birds.= Cut four arms as for the gondolas (stripwood 1/4" × 1/4" will do), drill small holes at one end, glue and nail them to a reel.

    Cut four short arms 3-1/2 inches and glue them on between the long arms as in Fig. 211.

    The birds are made of cardboard and corks. The birds from the long arms should hang low down, and the birds from the short arms higher up. Cane may be used for hanging the birds to the arms. The outer circle may be hung with sea-gulls (Fig. 212), and the inner circle with swallows (Fig. 213), or all the birds may be swallows. When the reel is turned quickly the birds in flight are very effective.

    [Illustration: FIG. 212]

    Fig. 212 shows how the sea-gull is made out of a cork and four pieces of cardboard (one for the head, two for the wings, one for the tail). Paint the cork white, paint eyes and a beak, mark a few feathers on the wings.

    Figs. 213, 214, 215 show how the swallow is made.

    [Illustration: FIG. 213]

    [Illustration: FIGS. 214, 215]

    CHAPTER XVI

    FIRE-ENGINE, MOTOR-LORRY, AND STEAM-ROLLER (PLATE VII)

    [Illustration: FIG. 216]

    =A Fire-engine= (Fig. 216). For this toy two cardboard boxes are required, one about 6" × 2" × 2", A in Fig. 216, and the other, B, 3" × 2" × 2". The cardboard case that contains Le Page's glue is a suitable size for B. Make holes through both sides of A, about 1 inch from one end, for the axle of the large wheels, and holes through B at K and J for the pieces of cane that support the ladders. Gum B to A and cover both with red paper. D is part of a round mantle-box, and the funnel, E, a roll of paper. Both are coloured yellow, F is a piece of stripwood, 1/2 inch by 1/4 inch, cut the right length and glued to B and to two supports, H.

    A similar piece is fastened on the other side.

    These are for the firemen to stand on. They may be left their natural colour or coloured grey. The seat, C, is a piece of stripwood, 1/2 inch by 1/2 inch, with a paper back, and L M are match sticks glued to the sides. G, the foot-rest, is made of cardboard and fastened to box, B, by two wedge-shaped pieces of wood. The ladders are made of strips of cardboard, with half matches as rungs. N is a piece of cardboard gummed underneath A and projecting from it 1/2 inch for the fireman's stand.

    This stand, seat, foot-rest, ladders, etc., should be coloured red. The small wheel is about 2 inches in diameter. The diameter of the large wheel can be measured when the smaller wheels are in position.

    [Illustration: FIG. 217]

    =A Motor-lorry= (Fig. 217). The foundation is a piece of stout cardboard or wood. A is an open box gummed to this, and covered with paper, suitably coloured. B is part of a box cut as in figure and gummed to A.

    Inside B a wooden seat, D, is fixed. C is a smaller box, gummed upside down. The size of the lorry will depend upon the boxes procurable. It can also be made of wood, in which case the windows, D and E, and the curved portion of B can be cut out with a fret-saw (see Part II). Both this toy and the fire-engine look very effective made of wood.

    [Illustration: PLATE VII FIRE-ENGINE, MOTOR-LORRY AND STEAM-ROLLER]

    =A Steam-roller= (Fig. 218). Fig. 219 shows the foundation of the steam-roller, A B, C D, etc., are pieces of stripwood, 1/4 inch by 1/4 inch. The front roller is made of a small mantle-box about 2-5/8 inches in length. The cover is glued on, holes are made at each end and a round, wooden axle passed through. The ends of the axle should be filed flat as in Fig. 220, so that A and C (Fig. 219) can be glued to them.

    The roller may be painted black. Cut a piece of cardboard, 6-1/2 inches by 4-1/4 inches. Bend this round so that it fits between A B and C D (Fig. 219); place the roller in position, mark with pencil the portions of cardboard that cover the roller and cut these off (see the shaded parts in Fig. 221).

    [Illustration: FIG. 218]

    Fig. 222 shows the construction from cardboard of the part of the cab marked G in Fig. 218. Half cuts are made along the dotted lines; the axle of the side wheels passes through the openings X and Y.

    Fig. 223 shows the part of the cab marked H in Fig. 218.

    Next cut a strip of wood, 4-1/4" × 1/4" × 1/4", for an axle for the side wheels, and round the ends; the wheels are 3 inches in diameter.

    Fasten these to the axle. Now glue the ends of the axle for the front roller to A and C. While this is drying colour the cardboard parts of the engine dark green. Bend J (Fig. 221) and glue this part to the inner sides of A B and C D. Cover the part marked K (Fig. 218) with paper; the part underneath K may remain uncovered. Glue the axle of the side wheels in position behind J, with just sufficient space for G to slip in between the engine and the axle. When the axle is secure glue G and H in position; G is glued to the inner sides of D C and B A, H is glued to the inner sides of blocks E and F.

    The supports, O and N (Fig. 218), are 4-1/2" × 1/4" × 1/4".

    [Illustration: FIG. 219]

    [Illustration: FIG. 220]

    [Illustration: FIG. 221]

    [Illustration: FIG. 222]

    [Illustration: FIG. 223]

    M and L are 4-1/4" × 1/4" × 1/4". These supports are 1/4 inch shorter, as they stand on the axle of the side wheels. The roof is of cardboard coloured green. Q is a cardboard wheel glued to L, and joined to the dome by a strip of cardboard, T, bent as in Fig. 223. a is inserted into a slit in the cork, and b is gummed to the wheel. The steps, R, are made of stiff paper. The funnel and the dome are made of corks.

    CHAPTER XVII

    GIPSY CARAVAN AND BATHING MACHINE

    The foundation of the =Caravan= is a piece of wood or cardboard, 6-3/4 inches by 4 inches. The sides are made of stiff paper or cardboard. For each of the long sides draw a rectangle, 6 inches by 4-1/2 inches, and to each side add 1/2-inch flanges. Make the two ends as follows:

    [Illustration: FIG. 224]

    Draw E F (Fig. 225) 4 inches, mark off E K and F L 1/2 inch each; erect perpendiculars K O and L P; with E as centre and radius, 4-1/2 inches (i.e. height of side A in Fig. 224) cut K O at G, find point H in the same way, join G E and H F. Find M, the centre of E F; with M as centre and radius M G describe an arc from G to H. Mark flanges along the top, G H, to which the roof can be gummed, and a flange at the bottom. In front and at the sides draw and colour the windows, which may be made to open. At the back cut out a door (Fig. 226). Colour the sides a light brown.

    Fasten up the caravan by the flanges; the base projects 3/4 inch at the front.

    [Illustration: FIG. 225]

    [Illustration: FIG. 226]

    [Illustration: FIG. 227]

    The roof is made of brown paper and should be cut to project about 1/4 inch over the sides and end of the caravan. It is then gummed to the flanges. The chimney is a roll of brown paper.

    The wheels should be at least 2 inches in diameter. Steps can be made of cardboard and paper, as in Fig. 227.

    [Illustration: FIG. 228]

    [Illustration: FIG. 229]

    =A Bathing Machine= (Fig. 228). This is similar to the Noah's Ark. The measurements are as follows: Base, 4 inches by 3 inches; sides, 4 inches by 4-1/2 inches. Measurements for the ends are given in Fig. 229. The roof should be cut to project about 1/4 inch over the sides and end of the machine. Cut a door in one end. Paint the machine in red and white stripes, mark the windows on each side and a number in front.

    The wheels should be about 1-1/2 inches in diameter. Steps may be added.

    CHAPTER XVIII

    A TRAIN AND RAILWAY STATION (PLATE VIII)

    =A Train.= (1) The Engine (Fig. 230). The body of the engine, A, is a long mantle-box or a piece of old curtain pole, about 4-1/2 inches long. The wooden bottom, B C, is 6-1/2 inches by 2-1/4 inches. A is glued to B C and kept in position by wooden blocks, E and F. The funnel and the dome are made from corks or pieces of round wood; their ends must be slightly concave, so that they may fit securely to A. A ring of cardboard is gummed to the top of the funnel, which may have a hole in it to take a piece of cotton-wool for smoke. The rim of the funnel and the dome are coloured yellow. The boiler can be covered with dark green or dark red paper.

    The buffers are pieces of round rod, to which cardboard discs are gummed.

    [Illustration: FIG. 230]

    The cab is made of cardboard, as shown in Fig. 231, and is coloured to match the engine. G K L M is gummed to the back of A (Fig. 230), and its sides are fastened to the footplate by the flanges.

    Fig. 232 shows the roof of the cab; the length, N O, is equal to the arc, G H K.

    [Illustration: FIG. 231]

    [Illustration: FIG. 232]

    The wheels should be about 1-1/2 inches in diameter and are fastened underneath B C, as described in Chapter XIII. Strips of cardboard, coloured black (D in Fig. 230), are glued to the wooden blocks behind the wheels.

    [Illustration: FIG. 233]

    (2) The Tender (Fig. 233) can be made in various ways. The bottom is best made of wood, 4 inches by 2-1/4 inches. The sides may be made of wood, 4 inches by 1-1/2 inches; the back must be cut to fit exactly between the sides. When the back and the sides are glued in position two wedge-shaped blocks may be glued into the corners for strength. The buffers and the wheels as in the engine.

    The sides of the tender may also be cut out of one piece of cardboard and fastened to the bottom by flanges. It should be coloured to match the engine. Pieces of cork dipped in ink make realistic coal.

    [Illustration: FIG. 234]

    [Illustration: FIG. 235]

    [Illustration: FIG. 236]

    (3) A Cattle Truck (Fig. 234). The foundation is a piece of wood, 4 inches by 2-1/4 inches. The sides may be cut from one piece of cardboard (Fig. 235) and coloured to represent bars, as in Fig. 234. It may also be made of wood as follows: Cut eight thin strips of wood, 4-1/2 inches by 1/4 inch, A B C D, etc., and eight pieces 1-3/4 inches by 1/4, J K L M in Fig. 234. The pieces are glued together to form the sides, as in Fig. 236. The length of the cross-bar, X, can be obtained by measuring the distance between Y and Z. Glue the sides to the bottom and to each other. Wedges may be glued in the corners for strength.

    [Illustration: FIG. 237]

    (4) A Carriage (Fig. 237). The bottom is of wood, 4-1/2 inches by 2-1/4 inches. The carriage is made of cardboard, on the same principle as the cattle truck, according to the measurements given in Fig. 237.

    The upper part of the door may be cut out and the lower part be made to open. The windows may be cut out or coloured with light blue pencil.

    The interior should be coloured or covered with paper to represent upholstering, etc. Before fastening the cardboard to the bottom, glue to the corners of the bottom small blocks of wood, 1 inch high, as supports for the cardboard seats, which should be gummed across them and be suitably coloured. Cut the cardboard for the top and leave flanges for fastening it to the ends of the carriage. The top and the ends are coloured black or dark brown. A little piece of round wood or cork, coloured black, is gummed to the top for a lamp. The step is made of stiff brown paper. Small screw eyes are screwed in the ends of the various parts of the train, which can be linked together by wire loops.

    =A Railway Station.= This station is a suitable size for the train already described.

    [Illustration: TRAIN AND STATION, SIGNAL-BOX AND SIGNAL

    (Part II, Chapter XII)]

    [Illustration: PLATE VIII RED CROSS MOTOR AND TAXI-CABS

    (Chapter XIX and Part II, Chapter III)]

    A (Fig. 238) is a piece of wood or cardboard, about 2 feet by 8 inches, standing on supports made of two match-boxes gummed together. B and C are pieces of cardboard fastened by flanges to A. D is a piece of cardboard gummed to supports E and F to cover the hollow in front; this and the platform may be suitably coloured. The railings are of cardboard and are fastened to a piece similar to D. Advertisements may be cut from papers and fastened to the posts behind the railings; also the name of the station in the same way (see Plate VIII).

    [Illustration: FIG. 238]

    The =Ticket-Office and Waiting-Room= is shown in Fig. 239. This may be made from a cardboard box of suitable size, or from cardboard (according to the measurements given). The bar before the ticket-office is made of match sticks. Tram tickets form good advertisements for the walls.

    Additions to station:

    (1) Porter's truck. See Chapter V.

    (2) Milk-cans. Corks covered with silver paper. See Chapter V.

    (3) Flower-pots. A cork filed the right shape and painted is used. The shrubs are cut out of cardboard, coloured and fastened into a slit in the cork (Fig. 240).

    (4) Lamp-posts (Fig. 241). A piece of round rod is placed in a reel or a cork to make it stand. The lamp is cut out of stiff paper, coloured as in the diagram, and is inserted in a slit at the top of the rod. A small piece of cane is passed through a hole near the top for the cross bar.

    (5) Benches and seats of various kinds may be made from cardboard.

    (6) Figures of men, women, etc., may be cut from illustrated papers and a strip of cardboard gummed behind them to make them stand upright.

    (7) Small boxes of various kinds may be placed on the platform for luggage.

    In country districts, where the station buildings are of a simple design, the children may be encouraged to make sketches of these, and to bring to the models described above such modifications as are to be found in their own locality. In Part II (Chapter XII) models of working signals and a signal-box are described.

    [Illustration: FIG. 239]

    [Illustration: FIG. 240]

    [Illustration: FIG. 241]

    CHAPTER XIX

    RED CROSS MOTOR AND TAXI-CAB (PLATE VIII)

    =Red Cross Motor.= Begin with a piece of wood 6-1/2" × 4" × 1/8". Glue and nail to this two pieces of stripwood, 1/2" × 1/4" × 4-1/4", A B and C D in Fig. 242.

    [Illustration: FIG. 242]

    [Illustration: FIG. 243]

    Next cut out a piece of wood 4 inches by 2 inches (a piece of cigar-box will do for this, or a piece of stout cardboard)--E in Figs. 242 and 243.

    Saw out the corners F and G, so that the piece of wood E will fit between the strips C D and A B. Saw slits at H and K to hold the cardboard hood. Glue E in position as in Fig. 242. A seat must be placed in front of E; it should measure about 2-1/4 inches by 5/8 inch, and may be glued to a piece of stripwood, 1/2" × 1/4" × 1-1/2", which is glued to E as in Fig. 243.

    [Illustration: FIG. 244]

    The bonnet is made of two pieces of stripwood, M and N, 1/2" × 1/2" × 2-1/2"; these are glued together and glued on as in Fig. 242. A piece of wood, P, well smoothed and with edges rounded, is glued over M and N. R is a piece of wood 4 inches by 1 inch, with the corners cut off or rounded. The hood is made of a piece of thin cardboard, 5 inches by 9-1/4 inches, cut as in Fig. 244.

    [Illustration: FIG. 245]

    This hood may be painted grey or khaki-colour, and a cross painted in red on the sides, or cut out of red paper and gummed on.

    [Illustration: FIG. 246]

    The hood is glued inside the strips of wood A B and C D in Fig. 242, and fits into the slits H and K in E.

    For axles and wheels see Chapter XIII.

    Figs. 245 and 246 show another kind of van, made of cane and brown linen.

    =A Taxi-cab.= Begin with a piece of wood, 6 inches by 3 inches. Cut out two pieces of cardboard (medium thickness), 2-1/2 inches by 2-1/2 inches. Draw doors on them and cut out as in Fig. 247. These pieces are painted the colour desired for the taxicab.

    [Illustration: FIG. 247]

    Cut out a piece of wood, 2-1/2 inches by 3 inches, for the back, A B.

    Cut two blocks of stripwood, 1/2" × 1/2" × 1" (C in Fig. 248), to be glued on to the bottom to support the seat and back, A B. When glueing these blocks in position see that they are about 1/8 inch from the end, and not quite close to the edges. If additional strength is required these blocks may be nailed as well as glued; the back, A B, is nailed and glued to these blocks.

    Now cut two pieces of stripwood, 1/4" × 1/4" × 2-1/2". Glue these posts 2-1/2 inches from the back, A B (D E in Fig. 248).

    Now glue on the sides. Side F is glued to post D E, to block C and to back A B; the other side is glued in the same way. A cardboard seat may be glued across the blocks and painted the colour desired for the interior.

    [Illustration: FIG. 248]

    [Illustration: FIG. 249]

    Now to make the front of the cab. Cut a piece of cardboard of medium thickness, 2-1/2 inches by 3 inches, G in Fig. 250. Draw and cut out the windows (the shaded portion of Fig. 250). To the bottom of G glue a piece of stripwood, H, 1/2 inch by 1/2 inch, leaving a strip of cardboard 1/8 inch wide on each side. H is for the driver's seat. Now glue the front, G, to the posts E D (Fig. 248), and the block H to the bottom.

    [Illustration: FIG. 250]

    Two cardboard seats, cut as in Fig. 251, should next be fastened by paper hinges to the inside of G.

    To make the top of the cab cut a piece of cardboard, 4-1/2 inches by 3 inches (Fig. 252). Make a half cut along A B and bend. Glue portion K to the back of the car A B, and L to the tops of the posts E D and to the sides F. If necessary a paper hinge can be used to fasten the top L to the front G.

    A cardboard seat about 1 inch wide is glued to the block H for the driver. The sides of this seat (M in Fig. 248) are made of pieces of wood, 1-1/2" × 1" × 1/8", one corner being rounded as in the figure, and they are glued to each side of the block H. Two pieces of cane should be glued on each side and to the roof.

    [Illustration: FIG. 251]

    [Illustration: FIG. 252]

    [Illustration: FIG. 253]

    [Illustration: FIG. 254]

    To make the bonnet, first cut the piece of wood P, 3 inches by 1-1/8 inches (Fig. 253). Two round cardboard discs, R and S, with centres painted red are glued at each corner. Next two pieces of wood the shape of Q in Figs. 249 and 253 are cut out. One piece, R, is glued to P, and P is glued to the bottom 1-1/2 inches from the front (see Fig. 248). The other piece, Q, is glued in front. A piece of cardboard, 1-1/2 inches by 3-1/2 inches, is cut as in Fig. 254; half cuts are made along the dotted lines. It is painted as in the diagram. This piece of cardboard is bent along the dotted lines and glued round Q and R to form the bonnet.

    Two pieces of wood, 1/4" × 1/4" × 3/4" (S and T in Fig. 253) are glued in front on each side of the bonnet; these have round pieces of cardboard gummed to them to represent lanterns.

    A number should be glued behind and in front of the car and a steering wheel added.

    The wheels may be made of wood or cardboard; diameter about 2 inches (see Chapter XIII).

    CHAPTER XX

    SWINGING AND JOINTED ANIMALS (PLATE IX)

    The peacock, monkey, and other animals with long tails can be cut from cardboard, and by means of lead buttons attached to their tails be made to swing realistically on a perch.

    It is difficult in some animals to get the balance correct and the position natural. If the drawings in this book are carefully enlarged and the lead buttons placed on the spot (A) indicated, they will be found to produce satisfactory animals. They look most effective and move more readily when made from three-ply wood with the fret-saw (see Part II), but this work is beyond the ten-year-old child. Children of ten and younger can, however, make them quite well of cardboard (the thicker the cardboard, providing the children can cut it with scissors, the better).

    A set made of wood by the teacher will form a delightful plaything for very little ones, and even material for nature lessons.

    The =Mouse= (Fig. 259) should be drawn on cardboard, cut out, and both sides coloured. If grey cardboard is used, eyes, whiskers, etc., can be drawn in sepia. Two lead buttons (about the size of halfpennies) are glued one on each side of the tail (at A); pieces of paper should then be glued over the buttons and painted to match the tail.

    Children will find it easier to draw these animals if a piece of cardboard is given them on which the animal to be drawn will just fit.

    The colouring should be as simple as possible to be effective. The stand is similar to that for the swinging boats, but with a rounded bar, on which the part of the animal marked B will rest.

    The =Cat= (Fig. 256), enlarged, made more fierce-looking and with stripes painted on it makes a very terrifying tiger, ready to spring.

    The =Monkey= (Fig. 265) may have another monkey swinging from his tail, and so on.

    Animals with movable limbs can also be cut from three-ply wood (see Part II) or cardboard. If cut from cardboard the various joints are fastened by small paper-fasteners.

    [Illustration: FIG. 255]

    [Illustration: FIG. 256]

    [Illustration: FIG. 257]

    [Illustration: FIG. 258]

    [Illustration: FIG. 259]

    [Illustration: FIG. 260]

    [Illustration: FIG. 261]

    [Illustration: FIG. 262]

    [Illustration: FIG. 263]

    [Illustration: FIG. 264]

    [Illustration: FIG. 265]

    [Illustration: PLATE IX SWINGING AND JOINTED ANIMALS]

    [Illustration: FIG. 266]

    [Illustration: FIG. 267]

    [Illustration: FIG. 268]

    [Illustration: FIG. 269]

    [Illustration: FIG. 270]

    [Illustration: FIG. 271]

    [Illustration: FIG. 272]

    [Illustration: FIG. 273]

    [Illustration: FIG. 274]

    [Illustration: FIG. 275]

    [Illustration: FIG. 276]

    [Illustration: FIG. 277]

    [Illustration: FIG. 278]

    To make the =Elephant= cut out two pieces the shape of A for the body (Fig. 279), and make four holes in each piece as in the diagram. Next, cut out four legs, and fasten two to each portion of the body by little paper-fasteners, then cut out the tail and fasten it between the two pieces that form the body; cut out two ears and the head; one fastener will hold the ears, the sides and the head together; the head is inside the two bodies, the ears outside.

    [Illustration: FIG. 279]

    The =Giraffe= (Fig. 255) can be made in a similar way.

    The =Butterfly= and the =Dragon-fly= (Figs. 274 and 275) have their wings and feelers cut out of cartridge paper and gummed on to cardboard bodies, so that when the animals swing their wings wave in a realistic manner.

    Fig. 277 shows how cardboard =Crabs= and =Lobsters= can be mounted amid under-sea surroundings.

    PART II

    CHAPTER I

    ADDITIONAL TOOLS

    Besides the tools mentioned in Part I, viz., bench-hook, hammer, saw, file, bradawl, pincers, the following additional tools will be found of service, though some of these are luxuries, and generally it is best to use as few as possible:

    1. A larger saw, for sawing rougher and larger wood than stripwood,

    e.g. a Tenon Saw, length 8 to 16 inches; 10 to 16 points to an inch, price about one and ninepence.

    1. An Archimedean Drill. This is useful for making small holes when

    there is danger of the wood splitting, however when once this drill is used, the worker never again feels inclined to use a bradawl or any other kind of boring tool. A quite useful and efficient drill can be bought for sixpence. Care must be taken that the drill bits or drill points do not break, for being quite slender and made of tempered steel they are rather fragile. A set of twelve drill points in assorted sizes in a metal case may be bought for sixpence. (For hints on the use of drill, see under fret-saw.)

    1. The Cramp or clamp is a contrivance used for holding boards

    together. An adjustable G cramp is a handy article for small work. There are several models of G cramps; that shown in the plate costs twopence.

    1. A Rasp or rough file for removing from boxes either paper or the

    names that are sometimes stamped on them.

    1. Brace and Bit. The smallest-sized brace, which has a sweep of 5

    inches, is the most convenient for children. Bits are of many patterns.

    The most common form is the Centre-bit which will cut holes from 3/8 inch to 1-1/2 inches in diameter.

    The Pin-bit or shell-bit of the smallest bore is used to make small-sized holes for screws, etc., but more especially when making preparation for using the centre-bit.

    A Centre-bit 1-3/4 inches in diameter costs ninepence; a brace and bit (3/4 inch diameter) together costs one and threepence; this latter bit is useful for boring holes in wheels for axles, etc.

    However the brace and bit is somewhat of a luxury and can be done without, for holes made with the Archimedean drill can always be enlarged to the required size, by means of round files and patience.

    1. The Mitre-block is a piece of beech-wood carefully squared and

    rebated so as to present throughout its length a rectangular step-like recess in which the wood to be mitred is placed in order to be cut at the necessary angle.

    In the raised part are three saw kerfs, two at an angle of 45° with the sides of the mitre-block and one half-way between these at right angles to the sides. The inclination of the saw-cuts at an angle of 45° is to the right and left respectively, so that when these angles are brought together in the mitred joint they may form a perfect right angle (90°).

    The mitre-block is a luxury, but it is useful in squaring off the ends of the wood, making picture frames, making the crane (Chapter V), etc., price sixpence.

    A Compass, Protractor, Ruler, Try-square and well-sharpened Pencil will be found useful in making nearly every toy.

    A Plane is not necessary for any of the toys described in the following chapters, but is mentioned here in case anyone should require one for reducing the thickness of wood or straightening a surface. The most economical one is a Jack-plane fitted with a smoothing-plane iron.

    The Jack-plane thus equipped may be used for reducing thicknesses of material (this is the real function of the Jack-plane) as well as for planing up surfaces true and smooth (the purpose of the smoothing-plane).

    The Jack-plane iron has its cutting edge slightly rounded in order to gouge out the wood and thus reduce thickness quickly, the smoothing-plane iron is ground to a straight edge.

    If both these irons are bought, the plane becomes both a Jack-and a smoothing-plane.

    The Stanley Bailey adjustable iron plane is a good one. No. 5 size, 14 inches long, is recommended.

    [Illustration: PLATE X USEFUL TOOLS

    1. Fret-saw
    2. 'Non-slip' safety ruler
    3. Card knife (London pattern)
    4. Craft knife
    5. G cramp
    6. Round-nose pliers
    7. Brass back metal saw
    8. Mitre block
    9. Tenon saw
    10. Archimedean drill
    11. Try square
    12. File
    13. Bradawl
    14. Brace and bit
    15. Carton knife]

    However, as we have said before, it can be done without. The first four tools are the really necessary ones.

    The Preservation of Tools. Keep tools in a dry atmosphere in a wooden box. Have them instantly dried after grinding and whenever they have been in contact with wet. Iron or steel parts should be frequently rubbed over with a piece of oily rag (if grease is used it must be free from salt). A speck of rust must be removed at once with fine emery-paper and oil.

    A generous coating of oil or vaseline should be given when tools are laid aside for some time.

    The Sharpening of Tools. Chisels, planes and knives are sharpened on oilstones. The Lily-white and the Rosy-red Washita oilstones are perhaps the best natural stones on the market. With regard to the oil used, machine, engine, neat's foot and sweet oils are all suitable. Clean the stone after use.

    Knives are sharpened at an angle on both sides, and will therefore have one side rubbed on the stone a few times and will then be turned over to rub the other side.

    Pen-knives can be sharpened on the ordinary kitchen knifeboard.

    CHAPTER II

    CAPSTAN, DREADNOUGHT, LINER

    [Illustration: FIG. 280]

    Saw a square piece of wood, side 4-1/3 inches, A B C D (Fig. 280). Cut two others, sides 2-1/2 inches. Saw the corners of these and make them octagons.[1] Drill a hole through the centre of E (Fig. 281). Into this hole glue a wooden meat skewer or round rod that will pass through the hole of a large reel. Glue and nail E to A B C D. Round the sides of F (Fig. 280) drill eight holes about 1/4 inch deep. Make levers of wood to fit these holes as in Fig. 280. Match sticks could be used. Now glue F to the top of the reel, G, taking care that the centre of F is over the centre of the reel. Place the reel over the axle, round which it can be turned.

    The capstan can be used for dragging along a toy boat by means of a string tied to the boat and wound round the reel.

    [1] To make an octagon from a square A B C D. Draw A D and B C (Fig. 282). With centre C and radius C O mark points E and K, with centre D and same radius mark M and G, and so on. Join E F, G H, J K, etc.

    [Illustration: FIG. 282]

    [Illustration: FIG. 281]

    A =Dreadnought=. The bottom of the boat is made from a piece of wood 9-3/4 inches by 2-1/2 inches. Shape the bow as in Fig. 283. To this glue another piece of wood, A B C, shaped to fit over the first, and about 6 inches in length. The two pieces can also be nailed together.

    [Illustration: FIG. 283]

    Cut a piece of wood, D, 2-3/4 inches by 1-1/2 inches, and glue and nail it to A B C. When these pieces are secure drill a hole through them at E for the mast. To carry the guns at the stern, shape two pieces of wood, G and F, in the form of circles or octagons, and glue and nail them in their place. The mast has holes drilled through it to hold pieces of cane.

    Nail 1/4 inch nails round one end of D and tie black thread round them.

    The guns are made of small rolls of brown paper, narrower at one end and painted black or grey. They are glued in position. The guns H and K, are fastened to a small piece of wood, L, to raise them above the level of the deck.

    The funnels are made of pieces of round wood or rolls of paper. The whole boat is painted grey, and rigged with black thread.

    A =Liner= (Fig. 284). The foundation of the boat is a piece of wood 10-1/2 inches by 1-1/2 inches, and about 1/4 inch in thickness, or thicker if possible. Shape the bow as in the figure. Round the stern.

    [Illustration: FIG. 284]

    Cut two pieces of cardboard 7-1/2 inches by 1-1/2 inches. These are for the decks (Fig. 286), and their stern ends must be shaped to correspond to the stern of the boat. Place them together on the foundation and make holes right through along their edges about 1/2 inch apart.

    [Illustration: FIG. 285]

    Cut two pieces of stripwood 1/2" × 1/4" × 6-1/2". Place them one over the other and drill a hole (1/4 inch in diameter) at P, about 1-3/4 inches from one end; this hole is to receive the mast, B. Along each piece of stripwood mark little doors and windows or port-holes. Glue each piece of stripwood along the middle of each cardboard deck, as in Fig. 285, having made holes in the cardboard corresponding to the holes P drilled in the stripwood.

    Now glue the stripwood of one piece to the middle of the cardboard of the other piece, taking care that the holes in each piece of cardboard are over each other (Fig. 286). While these pieces are drying, drill a hole about 2 inches from the bow for the mast A; drill holes along the edge of the bow (C D E), 1/3 an inch apart. Cut pieces of cane 7/8 inch to fit through the holes in the cardboard, and pieces about 3/8 inch in length for railings round the bow. Now glue the stripwood, G, to the boat so that ends H and K correspond with the edge of the stern.

    While this is drying prepare the masts. The mainmast is about 4 inches in length; this length allows it to stand 3 inches above the upper cardboard deck; the foremast is about 5 inches. Round the foremast glue a circular piece of cardboard, M, resting on a nail passing through the mast. Hammer a nail through at L for a spar, and put a piece of cane through a hole at N.

    [Illustration: FIG. 286]

    Glue the masts into position. Put in a nail at O in the stern, and a piece of cane, D, at the bow. Hammer in three nails in side D C and three on the other side for rigging. Insert the strips of cane through the holes in the cardboard; put a little glue into the holes in the wooden deck, and tap the cane in very gently; put the smaller pieces of cane into the holes round the bow. Tie cotton round the pieces of cane as in Fig. 284; tie cotton to masts, etc.

    The funnels are made of rolls of paper. If the liner is a Cunarder, the funnels should be red with black bands round the top and two black lines lower down. The wooden sides of the boat are painted dark brown.

    CHAPTER III

    MOTOR-CAR (PLATE VIII), SWINGING CRADLE, DECK-CHAIR

    A piece of flat wood 2-1/2 inches by 5-1/2 inches forms the bottom of the car. Two pieces of wood, 5-1/2 inches by 1 inch, are marked out and sawn as in Fig. 287. If it is found too difficult to saw out the corner pieces E F G and H K L, piece A E C M can be cut right off, by sawing along a line E M; G M H N can be cut off by sawing along lines G M and H N, the same with L N B D.

    [Illustration: FIG. 287]

    The corners E, F, G, H, K, L should be rounded with a file, as shown in the plate. The two side-pieces are then glued at each side of the bottom. Front and back pieces are then cut, and fitted between the bottom and sides; also a top to fit over A E, and seats to fit over G H and L B.

    These seats are then provided with backs and arms as shown in the plate. Axles and wheels should be made and put on as described in Part I, Chapter XIII. The wheels should be 1/2 an inch thick and have the edges rounded to represent the tyre. Lastly the steering pillar, with cardboard wheel attached, is fixed into bottom.

    A drawback to this toy is that it is made of so many separate pieces of wood, but children delight in it and can make it most successfully.

    Children from nine to twelve have turned out most effective motor-cars.

    =A Swinging Cradle= (Fig. 288). The cradle is a wooden box, 5 inches by 2-3/4 inches, and 2 inches deep. Before nailing this together, holes must be drilled in the two short sides, large enough to take a wooden axle about 1/4 inch in diameter.

    A and B are two pieces of stripwood 1/4" × 1/2" × 5"; their tops are rounded and holes similar to those in the cradle are drilled in them about 1-1/2 inches from the top.

    A is fastened to E, which is 4 inches in length, by means of triangular pieces of wood, C and D, which are glued and nailed to A and E.

    [Illustration: FIG. 288]

    F and K are wider pieces of wood, 5 inches by 1 inch. E is glued and nailed to F; a wider space must be left on one side of E so that the supports, H and G, can be fastened securely to F. G and H are 5-1/2" × 1/2" × 1/4".

    For the axles on which the cradle swings two pieces of stripwood, 1/4" × 1/4" × 1-1/4" must be cut and rounded, passed through holes in A and B, and glued securely to the holes in the sides of the cradle.

    =A Deck-chair= (Fig. 289). Two pieces of stripwood, 1/4" × 1/4" × 6", A B, C D, are taken. These are nailed and glued to E and F, each 2-1/4 inches. E and F should not be placed too near the ends of A B and C D, as the wood may split when the nails are driven in. E and F may be rounded. For the smaller frame of the chair, cut two pieces of stripwood, 5 inches in length. To get the measurements for the bars, M and L, place G H and J K inside A B C D as in Fig. 289, and measure distances G J and H K. This must be done very accurately.

    Before nailing G H and J K together, notches must be cut in them as in Fig. 290. The wood is partly sawn through at N and O, and the notch is then filed out, the safe edge of the file being turned towards N and O. To make the support, two pieces of wood are cut 2 inches in length, Q R and U V in Fig. 291, which shows how the length of the piece of wood S, which fastens Q R and U V together, is obtained. Frame G K is now nailed to frame A D (Fig. 289). Fix the point for the nail at T about 2 inches from H and B.

    When hammering the nail in at T, the bars A B and G H should rest upon the edge of the bench or table.

    [Illustration: FIG. 289]

    [Illustration: FIG. 290]

    [Illustration: FIG. 291]

    From A and C measure distances of 2-1/2 inches to R and V respectively.

    To these points nail the arms of the support, Q R and U V.

    A piece of coloured print or casement cloth is fastened to E and L.

    Other toys which can be made in a similar manner are a camp-stool, a clothes-horse, a screen.

    CHAPTER IV

    A TRAM-CAR

    This toy is made of wood, cardboard and paper (cartridge).

    A piece of wood, E F G H (Fig. 292), 8-1/2 inches by 2-1/4 inches is required for the bottom of the car, and two pieces, A B C D, 5 inches by 1-1/2 inches, for the sides.

    The supports (1, 2, 3, 4, 5, 6) are pieces of stripwood 1/4" × 1/4" × 3-1/2".

    [Illustration: FIG. 292]

    Glue three of these to one of the sides as in Fig. 293, allowing A B C D to project beyond them for a space equal to the thickness of the wooden bottom of the car, E F G H. This forms one side of the car; make the other in the same way.

    Fig. 294 shows how the sides and seats are fastened to the bottom of the car.

    The seat is a piece of stripwood 1/4" × 1/2" × 5".

    The top of the car is made of thick cardboard cut as in Fig. 295 to the given measurements. Before the top is fastened on strips of cartridge paper are gummed round its sides. These strips are about an inch wide, and are doubled in half; one half is gummed to the cardboard as in Fig.

    1. The other half bends downward and the names of places to which the

    car runs are printed on it. Similar pieces are gummed to the top and bent upward to form the railings round the top (Fig. 297.)

    [Illustration: FIG. 293]

    These pieces are painted yellow and edged with dark brown. Fig. 298 shows the entrance to the interior of car. J and K are pieces of cardboard, coloured yellow, and glued into position; L is a similarly coloured piece of cardboard or paper glued to supports 1 and 4. The other entrance is finished off in the same way.

    Cut two pieces of cardboard, 4-1/2 inches by 1-1/2 inches, as in Fig.

    1. Make half-cuts along the dotted lines. These pieces are bent round

    and glued to the ends of the bottom of the car (M, N, O in Fig. 292).

    These are also coloured yellow and their edges are dark brown.

    [Illustration: FIG. 294]

    The wheels are put on as the wheels of the engine (Part I, Chapter XIII).

    Cut two pieces of cartridge paper (P in Fig. 292), colour as described before, and gum under each end of car.

    Part Q is a piece of cardboard one inch wide, coloured like M N O, and gummed along the side, so that it covers at least half the wheels.

    The top can now be glued on. Thin strips of wood or pieces of cane (S and T in Fig. 292 and 296) are gummed in position.

    The steps into the car are made of cartridge paper coloured black.

    Fig. 300 shows the simplest way of making the stairs leading to the top of the car.

    [Illustration: FIG. 295]

    [Illustration: FIG. 296]

    [Illustration: FIG. 297]

    W Y is a piece of cardboard, 1 inch wide, to which pieces of stiff paper are gummed as in diagram. X is a flap of paper which fastens the steps to the top of the car.

    [Illustration: FIG. 298]

    [Illustration: FIG. 299]

    [Illustration: FIG. 300]

    [Illustration: FIG. 301]

    [Illustration: FIG. 302]

    [Illustration: FIG. 303]

    Seats for the Top. Pieces of cartridge paper are cut out, 1-3/4 inches by 3/4 inch, and coloured yellow. These are folded and cut as in Figs. 301 and 302. Part a is gummed to the side of the car, flap b is gummed to the floor. The second seat is gummed back to back to the first seat (Fig. 303). The top of the car will hold about six of these double seats. Single seats can be gummed in the corners.

    Steering-wheels are made as in Fig. 292. The top is of cardboard, cut or marked as in the figure and coloured black. This is gummed to a round rod, about 1-3/4 inches in length, which is fastened to the end of the car (N in Fig. 292). A similar steering-wheel is fastened to the other end.

    CHAPTER V

    A CRANE

    =A Crane.= Foundation, Arm, Pulley. Cut a piece of wood about 5-1/2 inches by 4-1/2 inches (H in Fig. 304). Cut a second piece a square, A, side 2-1/2 inches. Cut off the corners. This forms a stand on which the crane, etc., is fastened.

    Cut a piece of stripwood, 1/4" x 1/2" x 8". This is the arm of the crane, C, and is usually inclined at an angle of 45° to 60°. To support this arm cut B with sides about 3/4 inch, angles 45° or 60° and 30°.

    [Illustration: FIG. 304]

    [Illustration: FIG. 305]

    Cut two pieces of stripwood 1/4 inch by 1/4 inch, each 2 inches in length; shape like E and F in Fig. 305. These can now be glued and nailed to the arm C, projecting an inch beyond.

    A wheel for the pulley is cut from a round rod about 3/4 inch in diameter.

    If a groove is to be made round the circumference, the wheel should be about 1/4 to 3/8 inch thick. The groove is made with a file. A simple way to make the groove is to cut two cardboard discs a little larger in diameter than the wheel and glue them to each side of the wheel, in which case the latter need not be quite so thick. A hole is drilled through the wheel and enlarged by a round file to 1/4 inch in diameter.

    A piece of wood is now rounded for an axle, so that the wheel turns on it easily. This must fit tightly between E and F. Pass it through the wheel and glue it in position (G in Fig. 305).

    Winding Gear. Cut two pieces of stripwood, 1/4" x 1/2" x 2", J and K in Fig. 304. Round their tops, drill and enlarge holes in them.

    A hole must now be made through the centre of A, to enable this part to rotate on the foundation H, so that the crane may swing round in any direction. One of the simplest ways of doing this is to use a rivet, but if such is not procurable a screw may be used; the hole in A is made large enough for A to turn easily on the pivot which can be screwed into H. Before this is done, pieces J and K are fastened to A about one inch apart. To do this, drive nails right through A in correct positions, glue the ends of J and K and hammer them on to the nails. The head of the nail should rest on a piece of metal when the wood is being hammered down on its point.

    The support B should now be glued and nailed to A. When B is firmly fixed the arm C is fastened to it. The hole in the centre of A must be left clear.

    A is now riveted or screwed to H. A wooden axle, P, is made to pass through holes in J and K, and to the ends of this axle wheels are glued. (The figure shows one only.) The wheels can be made from reels, or several discs of cardboard gummed together. Before glueing on the wheels, wooden handles, L, are fastened to them. A wooden handle O is fastened to A. This is used for turning the crane. A piece of stout thread is tied to and wound round P and passed over the pulley. To the end of this a hook is fastened, made from wire or a bent pin. Bags can be made and filled with sawdust, etc.

    [Illustration: PLATE XI A CRANE]

    CHAPTER VI

    WINDMILL, WATER-WHEEL, AND WELL

    =Windmill= (Plate XII). Cut a square of wood, side 5 inches. This is the stand A in Fig. 306. To the centre of this glue a large reel, B.

    Next cut two 4-inch squares of wood and drill through their centres holes of about 1/4 inch in diameter. Glue one to the top of the reel so that the holes coincide. Next cut and glue into position the supports, C. For these stripwood 1/2 inch by 1/2 inch can be used.

    Cut two pieces of wood, 4 inches by 6 inches. These form two sides of the windmill; glue and nail them to the other 4-inch square, which forms the bottom of the windmill.

    [Illustration: FIG. 306]

    [Illustration: FIG. 307]

    [Illustration: FIG. 308]

    [Illustration: FIG. 309]

    Next cut two pieces of wood as in Fig. 307, for the other sides of the windmill. Drill a small hole in each at D about 1-1/2 inches from the top.

    On one of these sides mark and paint a door and windows as in Fig. 308, and over the door make a small roof, like the roof over the porch of the signal-box (Chapter XII). The windows and door may be cut out with a fret-saw and the door hinged on by means of a strip of strong linen.

    Glue and nail these sides in position. Make and fix the roof.

    The Sails. For these, two strips of wood, 1/4 inch square and 12 inches long, are necessary.

    In the centre of each of these, cut a slot half-way through the wood so that one may fit tightly into the other (F in Fig. 309). The sails are made of cardboard, and are rectangular in shape, measuring 5 inches by 2 inches. They are coloured light brown, with dark markings on them, as shown in the plate. Shape each end of the arms of the sails as in Fig. 309. This is easily done by filing, if the wood is fairly soft.

    Saw half-way through the wood at E, and file, or cut off the wood with a pen-knife. To this flat surface the sails are glued, so that they may be inclined to the wind. Now glue the two arms together, and when they are firm make a hole through the middle, F, where the arms cross. Take a short steel knitting needle, about 6-3/4 inches; fix one end into this hole with glue; then glue a small piece of cardboard or wood over it, and a cork washer behind, to keep the sails from touching the walls of the windmill; pass the needle through the holes in the sides of the windmill and glue a little knob of wood to the other end to prevent the needle slipping back.

    If a needle cannot be obtained, an old bicycle spoke, or even a wooden meat skewer, will do, but in the latter case the holes in the walls must be made larger, and the sails fixed to the end of the skewer by a small nail.

    Now glue a piece of round rod into the reel (H in Fig. 306) so that it projects about an inch. Place the mill on this stand, so that the rod passes through the hole in the bottom of the mill. The mill can be turned round in any direction so that the sails may catch the wind. Make a small ladder to reach the door.

    A very pretty but somewhat more difficult windmill is shown in Fig. 310.

    It is made of cardboard. The foundation, platform and railings can be made as described in the case of the lighthouse (Chapter XIII).

    The truncated hexagonal pyramid forming the body of the windmill is made as follows. With centre O (Fig. 311), and a radius of about 10 inches, describe an arc, A B.

    From any point on this arc mark off six spaces, each 2 inches.

    [Illustration: FIG. 310]

    [Illustration: FIG. 311]

    [Illustration: FIG. 312]

    Join the several points to each other and to O. With radius about 3 inches make arc C D. Join points where C D cuts radii, by dotted lines. Draw the flanges; make half cuts along the dotted lines, cut out along the dark lines, and fold into shape. Fasten together with seccotine; turn in the flanges at the bottom, and fasten them to the platform.

    The Top of the Windmill can be cut from one piece of cardboard. Draw square, A B C D (Fig. 312), large enough to project beyond top of hexagonal pyramid (side of square should be about 3 inches). On the middle of D C draw M K = 4 inches, and draw a similar line on A B. Join A J, J B, K D and K C, by curved lines. Produce A B and D C both ways.

    Make B F, C E, D H, A G, equal in length to arc B J. Draw the flange E F P O. Make holes in the middle of A J B and D K C through which the knitting-needle (on which the sail is fastened) may pass. Draw flanges on B J, J A, etc. Make half cuts along the dotted lines, and cut along the dark lines.

    Before fastening the top together, put a very small paper-clip through the middle of square, A B C D, and fasten it to a square of cardboard of the same size, so that it turns freely on it. This second square will be gummed to the top of the hexagonal pyramid, so that the top of the windmill may be turned in any direction. Bend up A J B and D K C at right angles to square, A B C D. Bend up B C E F and A D H G and gum them to the flanges of A J B and D K C; gum flange F O to A D H G. The sails are made as already described.

    =A Water-wheel= (Plate XII). The Wheel. Cut two discs of cardboard, 4 inches in diameter. Make holes in the centre, glue them to a small reel (about an inch high), and pass a round rod through for an axle. This wheel is an overshot water-wheel--that is, one that receives the water shot over the top, and must be fitted with 'buckets.' These receive the water at the top of the wheel and retain it until they reach the lowest point (see Fig. 313).

    The 'buckets' may be made of stiff paper or thin cardboard. Cut pieces 1 inch in width, and in length the distance of the two wheels apart plus 1/2 an inch. Mark these out as in Fig. 314, where a b is the distance between the wheels, and c, d, e, f are flanges for fastening the bucket to the wheels. Fold as in Fig. 315. Make at least twelve of these buckets; divide the wheel into twelve parts, and fasten the buckets between the wheels.

    [Illustration: WINDMILL AND WATERMILL]

    [Illustration: PLATE XII DRAWBRIDGE

    (Chapter VII)]

    To make the toy technically correct, the buckets should rest against a solid wheel contained within the two outer ones, as in Fig. 313, so that no water can run down toward the centre of the wheel. This can be easily managed, if desired, in the following manner:

    Before fastening the wheels to the reel, cut a long strip of paper, with flanges, as in Fig. 316, in which a b is the distance between the two outer wheels. Describe a smaller circle on one of the wheels, about 3 inches in diameter; glue the reel in position, then bend down the flanges of this strip of paper (Fig. 316), and gum these round the smaller circle of the wheel. Now gum the other wheel to the reel and to the flanges of the paper.

    [Illustration: FIG. 313]

    [Illustration: FIG. 314]

    [Illustration: FIG. 315]

    [Illustration: FIG. 316]

    [Illustration: FIG. 317]

    [Illustration: FIG. 318]

    The wheel should be painted brown, with spokes marked in darker colour.

    The plate shows the wheel and the mill-house. A hole is made in the side of the house, into which the axle of the wheel is inserted; the other end is held by the upright standard shown in the plate. The shoot may be made of cardboard; it should slope a little and should come just over the top of the wheel, which revolves freely beneath it.

    A chimney may be made of a cork, one end being cut on the slant, so that it stands upright on the roof, which is made of cardboard. The whole should be suitably coloured.

    An Undershot Wheel. This wheel is very simple to make. It has a number of float-boards arranged round it and is turned by a stream of water moving against the float-boards at its lowest point (Fig. 317).

    Fig. 318 shows how the float-boards, which are made of cardboard, are fastened between the wheels. With this undershot wheel, the shoot represented in the plate is not required.

    [Illustration: FIG. 319]

    =A Well= (Fig. 319). The round part of the well is made from a mantle-box or other round box. A is a fairly deep box turned upside down, with a circle cut out into which the mantle-box fits closely. This gives a fair depth. Cover the well with paper coloured to represent bricks; colour the box, A, green. The cardboard roof is glued to posts, D, and to triangular pieces of wood, B and C, glued to each side of D.

    Holes are drilled through the posts to take the roller, E, which is a round rod about 1/2 an inch in diameter. Drill small holes in it at each end. Push a pin from the end F through the side post into the roller.

    Bind a piece of wire to form a handle, G, and push one end of this into the roller. Bend a piece of wire or pin to form a hook, tie this to a piece of string, wind it round the roller and fasten the other end of the string to roller with seccotine. If a small chain is used this can be fastened by one of its links to the roller with a staple, and should be so fastened before the roller is put in position.

    CHAPTER VII

    DRAWBRIDGE AND SIEGE TOWER

    =A Drawbridge= (Plate XII). Two pieces of wood for the front, H and I (Fig. 320), must first be sawn 11 inches by 2-1/2 inches. The white wood of chocolate boxes, etc., is the best.

    Next two strips of wood, 7" × 1/4" × 1/4" are cut (satin walnut stripwood will do)--D E and F G in Fig. 321.

    The bridge is made of a piece of white wood, 2-5/8 inches by 5-1/4 inches. The posts, D E and F G, are nailed to the bridge so that the bridge turns on the nails. (Note that the bridge is nailed about 3-1/4 inches from bottom of post.)

    Next two lengths of stripwood, R S, are sawn 10" × 1/2" × 1/4", these are nailed to pieces H and I (nails are about 8-1/2 inches from bottom), so that the portions R T project about 5-1/2 inches. The strips R S turn freely on their nails.

    [Illustration: FIG.

    Edition notice Project Gutenberg source, credits & licence

    The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.

    Title
    Toy-Making in School and Home
    Author
    R. K. Polkinghorne
    Release date
    May 27, 2014 [eBook #45775]
    Language
    English
    Credits
    E-text prepared by Richard Tonsing, Chris Curnow, and the Online Distributed Proofreading Team (http://www.pgdp.net) from page images generously made available by Internet Archive (https://archive.org)
    Most recently updated
    October 24, 2024
    Transcriber and production notes
    Transcriber's note:
    
    Punctuation and spelling were made consistent when a
    predominant preference was found in this book; otherwise they
    were not changed.
    
    Simple typographical and spelling errors were corrected.
    
    P. 99 added "or" between "bridges," & "picture". Seemed to make
    more sense than "and" which could also have been used.
    Front matter as received (title page, contents)
    Note: Project Gutenberg also has an HTML version of this
          file which includes the original illustrations.
          See 45775-h.htm or 45775-h.zip:
          (https://www.gutenberg.org/cache/epub/45775/pg45775-images.html)
          or
          (https://www.gutenberg.org/files/45775/45775-h.zip)
    
    
          Images of the original pages are available through
          Internet Archive. See
          https://archive.org/details/toy-makinginscho00polkuoft
    
    
    Transcriber's note:
    
          Text enclosed by underscores is in italics (_italics_).
    
          Text enclosed by equal signs is in bold face (=bold=).
    
          A carat character is used to denote superscription. A
          single character following the carat is superscripted
          (example: C^5).
    
    
    
    
    
    TOY-MAKING IN SCHOOL AND HOME
    
    
    [Illustration: PLATE I A SCENE IN TOYLAND _Fr._]
    
    
    TOY-MAKING IN SCHOOL AND HOME
    
    by
    
    R. K. & M. I. R. POLKINGHORNE
    
    The County Secondary School Streatham
    
    
    
    
    
    
    
    London
    George G. Harrap & Company
    2 & 3 Portsmouth Street Kingsway W.C.
    1916
    
    The Riverside Press Limited, Edinburgh
    Great Britain
    Header as received
    The Project Gutenberg eBook of Toy-Making in School and Home
        
    This eBook is for the use of anyone anywhere in the United States and
    most other parts of the world at no cost and with almost no restrictions
    whatsoever. You may copy it, give it away or re-use it under the terms
    of the Project Gutenberg License included with this eBook or online
    at www.gutenberg.org. If you are not located in the United States,
    you will have to check the laws of the country where you are located
    before using this eBook.
    
    Title: Toy-Making in School and Home
    
    Author: R. K. Polkinghorne
            M. I. R. Polkinghorne
    
    
            
    Release date: May 27, 2014 [eBook #45775]
                    Most recently updated: October 24, 2024
    
    Language: English
    
    Other information and formats: www.gutenberg.org/ebooks/45775
    
    Credits: E-text prepared by Richard Tonsing, Chris Curnow, and the Online Distributed Proofreading Team (http://www.pgdp.net) from page images generously made available by Internet Archive (https://archive.org)
    Full Project Gutenberg licence
        
    
    Updated editions will replace the previous one—the old editions will
    be renamed.
    
    Creating the works from print editions not protected by U.S. copyright
    law means that no one owns a United States copyright in these works,
    so the Foundation (and you!) can copy and distribute it in the United
    States without permission and without paying copyright
    royalties. Special rules, set forth in the General Terms of Use part
    of this license, apply to copying and distributing Project
    Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
    concept and trademark. Project Gutenberg is a registered trademark,
    and may not be used if you charge for an eBook, except by following
    the terms of the trademark license, including paying royalties for use
    of the Project Gutenberg trademark. If you do not charge anything for
    copies of this eBook, complying with the trademark license is very
    easy. You may use this eBook for nearly any purpose such as creation
    of derivative works, reports, performances and research. Project
    Gutenberg eBooks may be modified and printed and given away—you may
    do practically ANYTHING in the United States with eBooks not protected
    by U.S. copyright law. Redistribution is subject to the trademark
    license, especially commercial redistribution.
    
    
    START: FULL LICENSE
    
    THE FULL PROJECT GUTENBERG™ LICENSE
    
    PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
    
    To protect the Project Gutenberg™ mission of promoting the free
    distribution of electronic works, by using or distributing this work
    (or any other work associated in any way with the phrase “Project
    Gutenberg”), you agree to comply with all the terms of the Full
    Project Gutenberg License available with this file or online at
    www.gutenberg.org/license.
    
    Section 1. General Terms of Use and Redistributing Project Gutenberg
    electronic works
    
    1.A. By reading or using any part of this Project Gutenberg
    electronic work, you indicate that you have read, understand, agree to
    and accept all the terms of this license and intellectual property
    (trademark/copyright) agreement. If you do not agree to abide by all
    the terms of this agreement, you must cease using and return or
    destroy all copies of Project Gutenberg electronic works in your
    possession. If you paid a fee for obtaining a copy of or access to a
    Project Gutenberg electronic work and you do not agree to be bound
    by the terms of this agreement, you may obtain a refund from the person
    or entity to whom you paid the fee as set forth in paragraph 1.E.8.
    
    1.B. “Project Gutenberg” is a registered trademark. It may only be
    used on or associated in any way with an electronic work by people who
    agree to be bound by the terms of this agreement. There are a few
    things that you can do with most Project Gutenberg electronic works
    even without complying with the full terms of this agreement. See
    paragraph 1.C below. There are a lot of things you can do with Project
    Gutenberg electronic works if you follow the terms of this
    agreement and help preserve free future access to Project Gutenberg
    electronic works. See paragraph 1.E below.
    
    1.C. The Project Gutenberg Literary Archive Foundation (“the
    Foundation” or PGLAF), owns a compilation copyright in the collection
    of Project Gutenberg electronic works. Nearly all the individual
    works in the collection are in the public domain in the United
    States. If an individual work is unprotected by copyright law in the
    United States and you are located in the United States, we do not
    claim a right to prevent you from copying, distributing, performing,
    displaying or creating derivative works based on the work as long as
    all references to Project Gutenberg are removed. Of course, we hope
    that you will support the Project Gutenberg mission of promoting
    free access to electronic works by freely sharing Project Gutenberg
    works in compliance with the terms of this agreement for keeping the
    Project Gutenberg name associated with the work. You can easily
    comply with the terms of this agreement by keeping this work in the
    same format with its attached full Project Gutenberg License when
    you share it without charge with others.
    
    1.D. The copyright laws of the place where you are located also govern
    what you can do with this work. Copyright laws in most countries are
    in a constant state of change. If you are outside the United States,
    check the laws of your country in addition to the terms of this
    agreement before downloading, copying, displaying, performing,
    distributing or creating derivative works based on this work or any
    other Project Gutenberg work. The Foundation makes no
    representations concerning the copyright status of any work in any
    country other than the United States.
    
    1.E. Unless you have removed all references to Project Gutenberg:
    
    1.E.1. The following sentence, with active links to, or other
    immediate access to, the full Project Gutenberg License must appear
    prominently whenever any copy of a Project Gutenberg work (any work
    on which the phrase “Project Gutenberg” appears, or with which the
    phrase “Project Gutenberg” is associated) is accessed, displayed,
    performed, viewed, copied or distributed:
    
        This eBook is for the use of anyone anywhere in the United States and most
        other parts of the world at no cost and with almost no restrictions
        whatsoever. You may copy it, give it away or re-use it under the terms
        of the Project Gutenberg™ License included with this eBook or online
        at www.gutenberg.org. If you
        are not located in the United States, you will have to check the laws
        of the country where you are located before using this eBook.
      
    1.E.2. If an individual Project Gutenberg electronic work is
    derived from texts not protected by U.S. copyright law (does not
    contain a notice indicating that it is posted with permission of the
    copyright holder), the work can be copied and distributed to anyone in
    the United States without paying any fees or charges. If you are
    redistributing or providing access to a work with the phrase “Project
    Gutenberg” associated with or appearing on the work, you must comply
    either with the requirements of paragraphs 1.E.1 through 1.E.7 or
    obtain permission for the use of the work and the Project Gutenberg
    trademark as set forth in paragraphs 1.E.8 or 1.E.9.
    
    1.E.3. If an individual Project Gutenberg electronic work is posted
    with the permission of the copyright holder, your use and distribution
    must comply with both paragraphs 1.E.1 through 1.E.7 and any
    additional terms imposed by the copyright holder. Additional terms
    will be linked to the Project Gutenberg License for all works
    posted with the permission of the copyright holder found at the
    beginning of this work.
    
    1.E.4. Do not unlink or detach or remove the full Project Gutenberg
    License terms from this work, or any files containing a part of this
    work or any other work associated with Project Gutenberg.
    
    1.E.5. Do not copy, display, perform, distribute or redistribute this
    electronic work, or any part of this electronic work, without
    prominently displaying the sentence set forth in paragraph 1.E.1 with
    active links or immediate access to the full terms of the Project
    Gutenberg License.
    
    1.E.6. You may convert to and distribute this work in any binary,
    compressed, marked up, nonproprietary or proprietary form, including
    any word processing or hypertext form. However, if you provide access
    to or distribute copies of a Project Gutenberg work in a format
    other than “Plain Vanilla ASCII” or other format used in the official
    version posted on the official Project Gutenberg website
    (www.gutenberg.org), you must, at no additional cost, fee or expense
    to the user, provide a copy, a means of exporting a copy, or a means
    of obtaining a copy upon request, of the work in its original “Plain
    Vanilla ASCII” or other form. Any alternate format must include the
    full Project Gutenberg License as specified in paragraph 1.E.1.
    
    1.E.7. Do not charge a fee for access to, viewing, displaying,
    performing, copying or distributing any Project Gutenberg works
    unless you comply with paragraph 1.E.8 or 1.E.9.
    
    1.E.8. You may charge a reasonable fee for copies of or providing
    access to or distributing Project Gutenberg electronic works
    provided that:
    
        • You pay a royalty fee of 20% of the gross profits you derive from
            the use of Project Gutenberg works calculated using the method
            you already use to calculate your applicable taxes. The fee is owed
            to the owner of the Project Gutenberg trademark, but he has
            agreed to donate royalties under this paragraph to the Project
            Gutenberg Literary Archive Foundation. Royalty payments must be paid
            within 60 days following each date on which you prepare (or are
            legally required to prepare) your periodic tax returns. Royalty
            payments should be clearly marked as such and sent to the Project
            Gutenberg Literary Archive Foundation at the address specified in
            Section 4, “Information about donations to the Project Gutenberg
            Literary Archive Foundation.”
        
        • You provide a full refund of any money paid by a user who notifies
            you in writing (or by e-mail) within 30 days of receipt that s/he
            does not agree to the terms of the full Project Gutenberg™
            License. You must require such a user to return or destroy all
            copies of the works possessed in a physical medium and discontinue
            all use of and all access to other copies of Project Gutenberg™
            works.
        
        • You provide, in accordance with paragraph 1.F.3, a full refund of
            any money paid for a work or a replacement copy, if a defect in the
            electronic work is discovered and reported to you within 90 days of
            receipt of the work.
        
        • You comply with all other terms of this agreement for free
            distribution of Project Gutenberg™ works.
        
    
    1.E.9. If you wish to charge a fee or distribute a Project
    Gutenberg™ electronic work or group of works on different terms than
    are set forth in this agreement, you must obtain permission in writing
    from the Project Gutenberg Literary Archive Foundation, the manager of
    the Project Gutenberg™ trademark. Contact the Foundation as set
    forth in Section 3 below.
    
    1.F.
    
    1.F.1. Project Gutenberg volunteers and employees expend considerable
    effort to identify, do copyright research on, transcribe and proofread
    works not protected by U.S. copyright law in creating the Project
    Gutenberg™ collection. Despite these efforts, Project Gutenberg™
    electronic works, and the medium on which they may be stored, may
    contain “Defects,” such as, but not limited to, incomplete, inaccurate
    or corrupt data, transcription errors, a copyright or other
    intellectual property infringement, a defective or damaged disk or
    other medium, a computer virus, or computer codes that damage or
    cannot be read by your equipment.
    
    1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
    of Replacement or Refund” described in paragraph 1.F.3, the Project
    Gutenberg Literary Archive Foundation, the owner of the Project
    Gutenberg™ trademark, and any other party distributing a Project
    Gutenberg™ electronic work under this agreement, disclaim all
    liability to you for damages, costs and expenses, including legal
    fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
    LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
    PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
    TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
    LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
    INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
    DAMAGE.
    
    1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
    defect in this electronic work within 90 days of receiving it, you can
    receive a refund of the money (if any) you paid for it by sending a
    written explanation to the person you received the work from. If you
    received the work on a physical medium, you must return the medium
    with your written explanation. The person or entity that provided you
    with the defective work may elect to provide a replacement copy in
    lieu of a refund. If you received the work electronically, the person
    or entity providing it to you may choose to give you a second
    opportunity to receive the work electronically in lieu of a refund. If
    the second copy is also defective, you may demand a refund in writing
    without further opportunities to fix the problem.
    
    1.F.4. Except for the limited right of replacement or refund set forth
    in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
    OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
    LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
    
    1.F.5. Some states do not allow disclaimers of certain implied
    warranties or the exclusion or limitation of certain types of
    damages. If any disclaimer or limitation set forth in this agreement
    violates the law of the state applicable to this agreement, the
    agreement shall be interpreted to make the maximum disclaimer or
    limitation permitted by the applicable state law. The invalidity or
    unenforceability of any provision of this agreement shall not void the
    remaining provisions.
    
    1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
    trademark owner, any agent or employee of the Foundation, anyone
    providing copies of Project Gutenberg™ electronic works in
    accordance with this agreement, and any volunteers associated with the
    production, promotion and distribution of Project Gutenberg™
    electronic works, harmless from all liability, costs and expenses,
    including legal fees, that arise directly or indirectly from any of
    the following which you do or cause to occur: (a) distribution of this
    or any Project Gutenberg work, (b) alteration, modification, or
    additions or deletions to any Project Gutenberg work, and (c) any
    Defect you cause.
    
    Section 2. Information about the Mission of Project Gutenberg
    
    Project Gutenberg is synonymous with the free distribution of
    electronic works in formats readable by the widest variety of
    computers including obsolete, old, middle-aged and new computers. It
    exists because of the efforts of hundreds of volunteers and donations
    from people in all walks of life.
    
    Volunteers and financial support to provide volunteers with the
    assistance they need are critical to reaching Project Gutenberg’s
    goals and ensuring that the Project Gutenberg collection will
    remain freely available for generations to come. In 2001, the Project
    Gutenberg Literary Archive Foundation was created to provide a secure
    and permanent future for Project Gutenberg and future
    generations. To learn more about the Project Gutenberg Literary
    Archive Foundation and how your efforts and donations can help, see
    Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
    
    Section 3. Information about the Project Gutenberg Literary Archive Foundation
    
    The Project Gutenberg Literary Archive Foundation is a non-profit
    501(c)(3) educational corporation organized under the laws of the
    state of Mississippi and granted tax exempt status by the Internal
    Revenue Service. The Foundation’s EIN or federal tax identification
    number is 64-6221541. Contributions to the Project Gutenberg Literary
    Archive Foundation are tax deductible to the full extent permitted by
    U.S. federal laws and your state’s laws.
    
    The Foundation’s business office is located at 41 Watchung Plaza #516,
    Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
    to date contact information can be found at the Foundation’s website
    and official page at www.gutenberg.org/contact
    
    Section 4. Information about Donations to the Project Gutenberg
    Literary Archive Foundation
    
    Project Gutenberg™ depends upon and cannot survive without widespread
    public support and donations to carry out its mission of
    increasing the number of public domain and licensed works that can be
    freely distributed in machine-readable form accessible by the widest
    array of equipment including outdated equipment. Many small donations
    ($1 to $5,000) are particularly important to maintaining tax exempt
    status with the IRS.
    
    The Foundation is committed to complying with the laws regulating
    charities and charitable donations in all 50 states of the United
    States. Compliance requirements are not uniform and it takes a
    considerable effort, much paperwork and many fees to meet and keep up
    with these requirements. We do not solicit donations in locations
    where we have not received written confirmation of compliance. To SEND
    DONATIONS or determine the status of compliance for any particular state
    visit www.gutenberg.org/donate.
    
    While we cannot and do not solicit contributions from states where we
    have not met the solicitation requirements, we know of no prohibition
    against accepting unsolicited donations from donors in such states who
    approach us with offers to donate.
    
    International donations are gratefully accepted, but we cannot make
    any statements concerning tax treatment of donations received from
    outside the United States. U.S. laws alone swamp our small staff.
    
    Please check the Project Gutenberg web pages for current donation
    methods and addresses. Donations are accepted in a number of other
    ways including checks, online payments and credit card donations. To
    donate, please visit: www.gutenberg.org/donate.
    
    Section 5. General Information About Project Gutenberg electronic works
    
    Professor Michael S. Hart was the originator of the Project
    Gutenberg concept of a library of electronic works that could be
    freely shared with anyone. For forty years, he produced and
    distributed Project Gutenberg eBooks with only a loose network of
    volunteer support.
    
    Project Gutenberg eBooks are often created from several printed
    editions, all of which are confirmed as not protected by copyright in
    the U.S. unless a copyright notice is included. Thus, we do not
    necessarily keep eBooks in compliance with any particular paper
    edition.
    
    Most people start at our website which has the main PG search
    facility: www.gutenberg.org.
    
    This website includes information about Project Gutenberg,
    including how to make donations to the Project Gutenberg Literary
    Archive Foundation, how to help produce our new eBooks, and how to
    subscribe to our email newsletter to hear about new eBooks.

    Source: Project Gutenberg ebook #45775. Public-domain status is recorded per item; the licence text above is reproduced unchanged.

    Source
    Project Gutenberg
    Record
    ebook 45775
    Rights
    public domain (US)
    Rendered
    2026-11-21
    Completeness
    First 200,000 characters rendered.