
Gutenberg · ebook 43027
Getting Gold: A Gold-Mining Handbook for Practical Men
by J. C. F. Johnson · English · public domain in the US
Getting Gold: A Gold-Mining Handbook for Practical Men by J. C. F. Johnson is an English public-domain text held from Project Gutenberg (ebook #43027). Text appearing in italic and bold font in the original publication are shown inside _..._ and =...= markup respectively. Some whole numbers and fractional parts are displayed as 10-2/3.
PREFACE TO THE FIRST EDITION
Some years ago the author published a small book entitled “Practical Mining,” designed specially for the use of those engaged in the always fascinating, though not as invariably profitable, pursuit of “Getting Gold.” Of this ten thousand copies were sold, nearly all in Australasia, and the work is now out of print. The London Mining Journal of September 9th, 1891, said of it: “We have seldom seen a book in which so much interesting matter combined with useful information is given in so small a space.”
The gold-mining industry has grown considerably since 1891, and it appeared to the writer that the present would be a propitious time to bring out a similar work, but with a considerably enlarged scope. What has been aimed at is to make “Getting Gold” a compendium, in specially concrete form, of useful information respecting the processes of winning from the soil and the after-treatment of gold and gold ores, including some original practical discoveries by the author. Practical information, original and selected, is given to mining company directors, mine managers, quartz mill operators, and prospectors.
In “Rules of Thumb,” chapters XI. and XII., will be found a large number of useful hints on subjects directly and indirectly connected with gold-mining.
The author’s mining experience extends back thirty years and he therefore ventures to believe with some degree of confidence that the information, original or compiled, which the book contains, will be found both useful and profitable to those who are in any capacity interested in the gold-mining industry.
J. C. F. J.
London, November 1896.
- * * * *
PUBLISHERS’ NOTE TO THE THIRD EDITION
The reviewer in Nature remarked on the First Edition of this book, “It has often been said that the practical man does not write books, but There Is Here a Complete Refutation of the Calumny.” The sale of two large editions has justified the opinion of the reviewer, and shows that the book from the practical man is valued. The Third Edition has been revised throughout and several new figures in the text and eight full-page plates have been added. It is confidently hoped that this new Edition will meet with the same kindly reception as the earlier ones.
November 1904.
CONTENTS
CHAPTER I
INTRODUCTORY. GETTING GOLD
Gold--Poetical and historical references--Its wide
distribution--Remains of ancient works--Old appliances--Modern
appliances anticipated--Labours of alchemists--Deposition
similar to common minerals--How first obtained--The Pactolian
annual miracle--Mode of working auriferous sand and
lodes--Principal sources of gold supply--Transvaal
production--Californian production--Real date of discovery in
Australia--State encouragement for new discoveries--Obstacles
in early Australian production--Australasian production to
date--The world’s wealth--Nuggets--Modern methods--Hydraulicing
cheapest--Definition of “lode”--Igneous and aqueous theories
contrasted--Difference between reef and alluvial gold--Mining
terms explained--Usual exploitation and
treatment--Operations--Stamp battery--Its advantages as
crusher--Usual milling operations pp.
1-12
CHAPTER II
GOLD PROSPECTING
(ALLUVIAL AND GENERAL)
Ignorance of prospectors--Chapter specially addressed to the
inexperienced--Valuable finds mostly accidents--Best way to
obtain elementary knowledge--An assaying experience--What a
prospector should know--Usual geological conditions of most
minerals--Unwise to follow theories blindly--Instances of
unlikely occurrences of gold--Importance of examining
outcrops--Curious matrices for gold--Alluvial and reef
gold--Hints to prospectors--Prospecting for alluvial
gold--Tin dish--Dry blowing--Size of prospecting
shaft--Intricacy of deep leads--How to recognise true
bottom--Gold bearing “gutters”--Difference in working
shallow and wet ground pp.
13-21
CHAPTER III
LODE OR REEF PROSPECTING
Likeliest localities for reefs--Similarity of indications of
minerals--Where first prospecting is done--A practical
example--Ironstone “blows”--Their true origin--Igneous theory
untenable--Usual trend of lodes in Australia--Exceptions
to the rule--Instances of rich deposits apart from
lodes--Sinuosity of lodes--How to trace lodes
demonstrated--Examine all indications--How to recognise gold,
silver, copper, tin--How to ascertain their value--Caution
in sinking--Where to prospect in case of parallel lodes--Usual
underlie in Australia--Size of prospecting shaft--Tip for
mullock--How to distinguish gold from pyrites or
mica--Estimating value from prospect--How to pan--An
amalgamating assay method--Author’s device when antimony
present--Battery, best test--Silver and tin indications--Lode
tin, stream tin, difficulty of recognising tin--Lode tin
always near granite--Minerals often mistaken for tin--How
to discriminate--Tin in Westralia pp.
22-33
CHAPTER IV
THE GENESIOLOGY OF GOLD
(AURIFEROUS LODES)
Igneous theory formerly strongly upheld--Quotation from
Rosales--His arguments combated--Hydro-thermal action--Its
evidences in New Zealand--Professor Lobley’s theory--Author’s
deposition theory confirmed--Later works--Conclusions of
Le Conte--Metamorphic slates and earlier Silurian strata
theory--Format ion of mineral lodes--What was gold
originally?--Metal or metallic salt--Silicate hypothesis
preferred--Explanation of sulphides and silicates of
gold--Bischof’s interesting experiment--Skey’s and other
deposition experiments--How gold took its metallic form--The
Comstock lode--Occurrence of gold in shutes explained--Why
lode junctions are usually rich--Cox’s theory--Instances
of lodes re-forming--Gold as natural sulphide--Newbery’s
theory of gold in pyritous lodes--Probable occurrence in
pyritous ores as sulphide pp.
34-47
CHAPTER V
THE GENESIOLOGY OF GOLD
(AURIFEROUS DRIFTS)
Derivation and occurrence--Old diggers’ “growing”
theory--Deposition experiment illustrating nature--Denudation
of quartz lodes theory--Examples of its probability--Nuggets
require other explanation--Deposition, most rational
theory--Usual alluvial theory combated--Daintree’s and
Wilkinson’s deposition experiments--Spondulix and Lothair
nuggets--Newbery’s deposition experiments--Nugget form
explained--Author’s experiments in manufacture of golden
quartz--Extract from author’s “Deposition of
Gold”--Remarkable nugget--Reason of superiority of alluvial
gold pp. 48-58
CHAPTER VI
GOLD EXTRACTION
Division of methods of treating ores--Scientific extraction
indispensable--Superficial knowledge--German and Australian
methods compared--Schools of Mines--Antiquity of gold
working--Miner’s equipment--Tub, cradle, long tom--How
operated--Hydraulic mining--Extensive Australian
drifts--Extraction of reef gold--Amalgamation--Crushing
appliances--Preference for stampers--The Lemichel
syphon--The Griffin mill--The Huntingdon mill--Dodge
crusher--Krupp Grusonwerk Ball Mill--Premature plant
erecting--Danger of untried processes--Double faulted
lode--Automatic ore feeders--Machinery site--Foundations
for battery--Weight of stamps--Power and water required
for battery--Selection of screen--Fall of tables--Ancient
Egyptian gold washing table--Blanket tables--Successful
treatment of refractory ore in Australia--Methods vary
with ore--Importance of even crushing--Points re
crushing--Best form of stamper box--Cleaning plates--Form
of scraper--Retorting amalgam--Special difficulties, how
to overcome them pp.
59-86
CHAPTER VII
GOLD EXTRACTION
(SECONDARY PROCESSES AND LIXIVIATION)
Choosing the plant---Various ores and their
constituents--Amalgamation--Various concentrators--Percussion
tables--Frue vanner--Pan concentration--Simultaneous grinding
and amalgamating condemned--Watson and Denny pan--Good
machines often condemned--Procedure in ore treatment--Duncan
pan--Calcining--Rotatory amalgamator--Steaming
concentrates--Dry amalgamation--Sulphuric acid and sickened
mercury--Amalgamation without overflow--Experiments--Steam
as an agent in gold extraction--Lixiviation by
chlorine--Various processes--Mount Morgan--Cyanide process pp. 87-99
CHAPTER VIII
CALCINATION OR “ROASTING” OF ORES
Effect of roasting--Various methods--Reverberatory
furnaces--Howell, White, Brückner, Thwaite-Denny, and
Molesworth types of revolving cylinder furnaces--Shaft
type--The Stetefeldt furnace--Chimneys--Depositing chambers pp. 100-108
CHAPTER IX
MOTOR POWER AND ITS TRANSMISSION
Water and steam power--Waterless power plant described--Oil
engines--Electric transmission--Advantages of electric
power--Its possibilities pp. 109-112
CHAPTER X
COMPANY FORMATION AND OPERATIONS
Mining becoming a scientific business--Initial mistakes in
public companies--Self-styled mining experts--How articles
of association are compiled--How directors and officials
are chosen--The usual consequences--Remedies--State
inspectors--Certificates for mine managers--Directors--
Specialists in various branches advisable--Qualifications
of mine managers--Economic advantages of co-operation--Joint
central extraction works--Folly of adopting untried new
processes without full knowledge--Pertinent
quotation--Warning to directors--Robbing mills--How
prevented--Conclusion pp. 113-126
CHAPTER XI
RULES OF THUMB
Living places--A bush bed--Northern Territory
hammock--Purifying water--To obtain water from roots--An
effective filter--Canvas water-bag--Medicine case--Producing
fire--To copy correspondence--Simple telegraphic code--A
serviceable soap--To cross a flooded stream--To make a hide
bucket--To make a “slush lamp” pp. 127-139
CHAPTER XII
RULES OF THUMB
(MINING APPLIANCES AND METHODS)
A temporary forge--Making charcoal--Rough smelting on the
mine--Misfires in blasting--To prevent loss of rich
specimens in blasting--Simple retorting of small quantities
of amalgam--Simple mode of ascertaining nominal H.-P. of
engine--Scaling copper plates--How to supply mercury and
water to mortar-boxes--Power for mills--To avoid loss in
cleaning up--Iron extractor--To silver copper plates--How to
make a dolly, rough windlass, puddler--A makeshift
pump--Squeezing amalgam--Sluice plates--Measuring inaccessible
distances--To set out a right angle with tape--Simple levelling
instruments--Levelling by aneroid barometer--To determine
heights--To find depth of shaft--Plan for re-using
water--Cooling compound for heated bearing--Cleaning greasy
plummer blocks--An excellent anti-friction compound--To
clean brass--A solvent for rust--To protect iron and steel
from rust--To keep machinery from rusting--Fire-lute--
Rope-splicing pp.
140-166
APPENDIX
- SELECTED DATA FOR MINING MEN.
To find lost part of a vein--Calculation of ore
reserves--Hydraulics--Boring--Durability of ropes--Diamond
drilling--Notes on timber--Laying out areas--Mensuration--Mine
surveying problems--Rainfall--Belting notes--Weight and bulk of
materials--Chemical elements and their symbols, &c.--Common
names of chemical substances--Thermometer readings--Freezing,
fusing, and boiling points--Heat values of fuels--Signs and
symbols used in expressing formulas--Weights and measures--To
find contents of a tank--Sizes and weights of corrugated iron
sheets--Thickness and weight of sheet iron--Qualities of
ropes--Atmosphere--Fresh and salt water--Velocity of falling
fluids--Pressure of water--Table of squares and cubes, and
their roots--Wages and interest tables. pp.
167-193
2. AUSTRALASIAN MINING REGULATIONS pp. 194-201
INDEX pp. 203-206
GETTING GOLD
CHAPTER I
INTRODUCTORY
Gold is a name to charm by. It is desired by all nations, and is the one metal the supply of which never exceeds the demand. Some one has aptly said, “Gold is the most potent substance on the surface of our planet.”
Tom Hood sings:
Gold, gold, gold, gold!
Bright and yellow, hard and cold;
Molten, graven, hammered, rolled,
Heavy to get, and light to hold;
Stolen, borrowed, squandered, doled.
That this much appreciated metal is heavy to get is proved by the high value which has been placed on it from times remote to date, and that it is light to hold most of us know to our cost.
We read no farther than the second chapter in the Bible when we find mention of gold. There Moses speaks of “the land of Havilah, where there is gold”; and in Genesis, chapter xxiv., we read that Abraham’s servant gave Rebekah an earring of half a shekel weight, say 4 dwt. 13 grs., and “two bracelets of ten shekels weight,” or about 4½ ozs. Then throughout the Scriptures, and, indeed, in all historic writings, we find frequent mention of the king of metals, and always it is spoken of as a commodity highly prized.
I have sometimes thought, however, that either we are mistaken in the weights used by the Hebrew nation in early days, or that the arithmetic of those times was not quite “according to Cocker.” We read, I. Kings x. and xli., that Solomon in one year received no less than six hundred and three score and six talents of gold. If a talent of gold was, as has been assumed, 3000 shekels of 219 grains each, the value of the golden treasure accumulated in this one year by the Hebrew king would have been £3,646,350 sterling.
Considering that the only means of “getting gold” in those days was a most primitive mode of washing it from river sands, or a still more difficult and laborious process of breaking the quartz from the lode without proper tools or explosives, and then slowly grinding it by hand labour between two stones, the amount mentioned is truly enormous.
Of this treasure the Queen of Sheba, who came to visit the Hebrew monarch, contributed a hundred and twenty talents, or, say, £600,000 worth. Where the Land of Ophir, whence this golden lady came, was really situated has evoked much controversy, but there is now a general opinion that Ophir was on the east coast of Africa, somewhere near Delagoa Bay, in the neighbourhood of the Limpopo and Sabia rivers. It should be mentioned that the name of the “black but comely” queen was Sabia, which may or may not be a coincidence, but it is certainly true that the rivers of this district have produced gold from prehistoric times till now.
The discovery of remarkable ruins in the newly acquired province of Mashonaland, which evince a high state of civilisation in the builders, may throw some light on this interesting subject.
The principal value of gold is as a medium of exchange, and its high appreciation is due, first, to the fact that it is in almost universal request; and, secondly, to its comparative scarcity; yet, oddly enough, with the exception of that humble but serviceable metal iron, gold is the most widely distributed metal known. Few, if any, countries do not possess it, and in most parts of the world, civilised and uncivilised, it is mined for and brought to market. The torrid, temperate, and frigid zones are almost equally auriferous.
Siberia, mid-Asia, most parts of Europe, down to equatorial and southern Africa in the Old World, and north, central, and southern America, with Australasia, in what may be termed the New World, are all producers of gold in payable quantities.
In the earlier ages, the principal source of the precious metal was probably Africa, which has always been prolific in gold. To this day there are to be seen in the southern provinces of Egypt excavations and the remains of old mine buildings and appliances left by the ancient gold-miners, who were mostly State prisoners. Some of these mines were worked by the Pharaohs of, and before, the time of Moses; and in these dreadful places thousands of Israelites were driven to death by the taskmaster’s whip. Amongst the old appliances is one cut out of stone very similar to the amalgamating, or blanket-table, of a modern quartz mill (see p. 79).
The grinding was done between stones, and possibly by means of such primitive mechanism as is used to-day by the natives of Korea.
[Illustration: FIG. 1. KOREAN MILL.]
The Korean Mill is simply a large hard stone shaped as in Fig. 1, to which a rocking motion is given by manual power by means of the bamboo handles while the ore is crushed between the upper and basement stone.
Solomon says “there is no new thing under the sun”; certainly there is much that is not absolutely new in appliances for gold extraction. I lately learned that the principle of one of our newest concentrating machines, the Frue vanner, was known in India and the East centuries ago; and we have it on good authority--that of Pliny--that gold saving by amalgamation with mercury was practised before the Christian era. It will not be surprising then if, ere long, some one claims to have invented the Korean Mill, with improvements.
Few subjects in mineralogical science have evoked more controversy than the origin of gold. In the Middle Ages, and, indeed, down to the time of that great philosopher, Sir Isaac Newton, who was himself bitten with the craze, it was widely believed that, by what was known as transmutation, the baser metals might be changed to gold; and much time and trouble were expended in attempts to make gold--needless to say without the desired result. Doubtless, however, many valuable additions to chemical science, and also some useful metallic alloys, were thus discovered.
The latest startling statement on this subject comes from, of course, the wonderland of the world, America. In a recently published journal it is said that a scientific metallurgist there has succeeded in producing absolutely pure gold, which stands all tests, from silver. Needless to say, if this were true, at all events the much vexed bi-metallic question would be solved at once and for all time.
It is now admitted by all specialists that the royal metal, though differing in material respects in its mode of occurrence from its useful but more plebeian brethren of the mineral kingdom, has yet been deposited under similar conditions from mineral salts held in solution.
The first mode of obtaining this much desired metal was doubtless by washing the sand of rivers which flowed through auriferous strata. Some of these, such as the Lydian stream, Pactolus, were supposed to renew their golden stores miraculously each year. What really happened was that the winter floods detached portions of auriferous drift from the banks, which, being disintegrated by the rush and flow of the water, would naturally deposit in the still reaches and eddies any gold that might be contained therein.
The mode of washing was exactly that carried on by the natives in some districts of Africa to-day. A wooden bowl was partly filled with auriferous sand and mud, and, standing knee-deep in the stream, the operator added a little water, and caused the contents of the bowl to take a circular motion, somewhat as the modern digger does with his tin dish, with this difference, that his ancient prototype allowed the water and lighter particles to escape over the rim as he swirled the stuff round and round. I presume, in finishing the operation, he collected the golden grains by gently lapping the water over the reduced material, much as we do now.
I have already spoken of the mode in which auriferous lode-stuff was treated in early times--i.e., by grinding between stones. This is also practised in Africa to-day, and we have seen that the Koreans, with Mongolian acuteness, have gone a step farther, and pulverise the quartz by rocking one stone on another. In South America the arrastra is still used, which is simply the application of horse or mule power to the stone-grinding process, with use of mercury.
The principal sources of the gold supply of the modern world have been, first, South America, Transylvania in Europe, Siberia in Asia, California in North America, and Australia. Africa has always produced gold from time immemorial.
The later development in the Johannesburg district, Transvaal, which has absorbed so many millions of English capital, is now, after much difficulty and disappointment--thanks to British pluck and skill--producing splendidly. The yield for 1898 was 4,295,609, and for 1903 2,859,477 ounces--a yield never before equalled by lode-mining from one field.
In the year 1847 gold was discovered in California, at Sutor’s sawmill, Sacramento Valley, where, on the water being cut off, yellow specks and small nuggets were found in the tail race. The enormous “rush” which followed is a matter of history and the subject of many romances, though the truth has, in this instance, been stranger than fiction.
The yield of the precious metal in California since that date up to 1888 amounts to £256,000,000.
Following close on the American discovery came that of Australia, the credit of which has usually been accorded to Hargraves, a returned Californian digger, who washed out payable gold at Lewis Ponds Creek, near Bathurst, in 1851. But there is now no reason to doubt that gold had previously been discovered in several parts of that great island continent. It may be news to many that the first gold mine worked in Australia was opened about twelve miles from Adelaide city, S.A., in the year 1848.
This mine was called the Victoria; several of the Company’s scrip are preserved in the Public Library; but some two years previous to this a man named Edward Proven had found gold in the same neighbourhood.
Most Governments nowadays encourage in every possible way the discovery of gold-fields, and rewards ranging from hundreds to thousands of pounds are given to successful prospectors of new auriferous districts. The reward the New South Wales authorities meted out to a wretched convict, who early in this century had dared to find gold, was a hundred lashes vigorously laid on to his already excoriated back. The man then very naturally admitted that the alleged discovery was a fraud, and that the nugget produced was a melted down brass candlestick.
One might have imagined that even in those unenlightened days it would not have been difficult to find a scientist sufficiently well informed to put a little nitric acid on the supposed nugget, and so determine whether it was the genuine article, without skinning a live man first to ascertain. My belief is that the unfortunate fellow really found gold, but, as Mr.
Deas Thompson, the then Colonial Secretary, afterwards told Hargraves in discouraging his reported discovery, “You must remember that as soon as Australia becomes known as a gold-producing country it is utterly spoiled as a receptacle for convicts.”
This, then, was the secret of the unwillingness of the authorities to encourage the search for gold, and it is after all due to the fact that the search was ultimately successful beyond all precedent, that Australia has been for so many years relieved of the curse of convictism, and has ceased once and for all to be a depôt for the scoundrelism of Britain--“Hurrah for the bright red gold!”
From the year 1851 to 1897 the value of the gold raised in the Australasian colonies realised the enormous amount of nearly £550,000,000. One cannot help wondering where it all goes.
Mulhall gives the existing money of the world at 2437 million pounds, of which 846 millions are paper, 801 millions silver, and 790 millions gold. From 1830 to 1880 the world consumed by melting down plate, &c., 4230 tons of silver more than it mined. From 1800 to 1870 the value of gold was about 15½ times that of silver. From 1870 to 1880 it was 16·7 times the value of silver and now exceeds it over twenty times. In 1700 the world had 301 million pounds of money, and in 1860, 1180 million pounds sterling. In 1894 the current gold was worth about £800,000,000.
The gold first worked for in Australia, as in other places, was of course alluvial, by which is usually understood loose gold in nuggets, specks, and dust, lying in drifts which were once the beds of long extinct streams and rivers, or possibly the moraines of glaciers, as in New Zealand.
Further on the differences will be mentioned between “alluvial” and “reef” or lode gold, for that there is a difference in origin in many occurrences, is, I think, provable. I hold, and hold strongly, that true alluvial gold is not always derived from the disintegration of lodes or reefs. For instance, the “Welcome Nugget” certainly never came from a reef. No such mass of gold, or anything approaching it, has ever yet been taken from a quartz matrix. It was found at Bakery Hill, Ballarat, in 1858, weight 2195 ozs., and sold for £10,500. This was above its actual value.
The “Welcome Stranger,” a still larger mass of gold, was found amongst the roots of a tree at Dunolly, Victoria, in 1869, by two starved out “fossickers” named Deeson and Oates. The weight of this, the largest authenticated nugget ever found, was 2268½ ozs., and it was sold for £10,000, but it was rendered useless as a specimen by the finders, who spent a night burning it to remove the adhering quartz.
But the ordinary digger neither hopes nor expects to unearth such treasures as these. He is content to gather together by means of puddling machine, cradle, long tom, or even puddling tub and tin dish, the scales, specks, dust, and occasional small nuggets ordinarily met with in alluvial “washes.”
Having sunk to the “wash,” or “drift,” the digger, by means of one or more of the appliances mentioned above, proceeds to separate the gold from the clay and gravel in which it is found. Of course in large alluvial claims, where capital is employed, such appliances are superseded by steam puddlers, buddles, and other machinery, and sometimes mercury is used to amalgamate the gold when very fine.
Hydraulicing is the cheapest form of alluvial mining, but can only be profitably carried out where extensive drifts, which can be worked as quarry faces, and unlimited water exist in the same neighbourhood. When such conditions obtain a few grains of gold to the yard or ton will pay handsomely.
[Illustration: FIG. 2. LODE FORMATION IN SLATE AND SANDSTONE.]
Lode, or reef mining, is a more expensive and complicated process, requiring much skill and capital. First, let me explain what a lode really is. The American term is “ledge,” and it is not inappropriate or inexpressive. Imagine then a ledge, or kerbstone, continuing to unknown depths in the earth at any angle varying from perpendicular to nearly horizontal. This kerbstone is totally distinct from the rocks which enclose it; those on one side may be slate, on the other, sandstone (Fig.
2); but the lode, separated usually by a small band of soft material known to miners as “casing,” or “fluccan,” preserves always an independent existence, and in many instances is practically bottomless so far as human exploration is concerned.
There are, however, reefs or lodes which are not persistent in depth.
Sometimes the lode formation is found only in the upper and newer strata, and cuts out when, say, the basic rocks (such as granite, &c.) are reached. Again, there is a form of lode known among miners as a “gash” vein (Fig. 3). It is sometimes met with in the older crystalline slates, particularly when the lode runs conformably with the cleavage of the rock.
[Illustration: FIG. 3. GASH VEIN.]
Much ignorance is displayed on the subject of lode formation and the deposition of metals therein, even by mining men of long experience.
Many still insist that lodes, particularly those containing gold, are of igneous origin, and point to the black and brown ferro-manganic outcrops in confirmation. It must be admitted that often the upper portions of a lode present a strong appearance of fire agency, but exactly the same appearance can be caused by oxidation of iron and manganese in water.
It may now be accepted as a proven fact that no true lode has been formed, or its metals deposited except by aqueous action. That is to say, the bulk of the lode and all its metalliferous contents were once held in solution in subterranean waters, which were ejected by geysers or simply filtered into fissures formed either by the shrinkage of the earth’s crust in process of cooling or by volcanic force.
It is not contended that the effect of the internal fires had no influence on the formation of metalliferous veins, indeed, it is certain that they had, but the action was what is termed hydro-thermal (hot water); and such action we may see in progress to-day in New Zealand, where hot springs stream or spout above the surface, when the silica and lime impregnated water, reduced in heat and released from pressure, begins forthwith to deposit the minerals previously held in solution.
Hence the formation of the wondrous White and Pink Terraces, destroyed by volcanic action some sixteen years since, which grew almost while you watched. So rapidly was the silica deposited that a dead beetle or ti-tree twig left in the translucent blue water for a few days became completely coated and petrified.
Gold differs in its mode of occurrence from other metals in many respects; but there is no doubt that it was once held in aqueous solution and deposited in its metallic form by electro-chemical action.
It is true we do not find oxides, carbonates, or bromides of gold in Nature, nor can we feel quite sure that gold now exists naturally as a sulphide, chloride, or silicate, though the presumption is strongly that it does. If so, the deposition of the gold may be ceaselessly progressing.
Generally reef gold is finer as to size of the particles, and, as a rule, inferior in quality to alluvial. Thus, in addition to the extra labour entailed in breaking into one of the hardest of rocks, quartz, the madre de oro (“mother of gold”) of the Spaniards, there is the additional labour required to pulverise the rock so as to set free the tiniest particles of the noble metal it so jealously guards. There is also the additional difficult operation of saving and gathering together these small specks, and so producing the massive cakes and bars of gold in their marketable state.
Having found payable gold in quartz on the surface, the would-be miner has next to ascertain two things. First, the strike or course of the lode; and secondly, its underlie, or dip. The strike, or course, is the direction of the lode lengthwise.
In Australia the term “underlie” is used to designate the angle from the perpendicular at which the lode lies in its enclosing rocks, and by “dip” the angle at which it dips or inclines lengthwise on its course.
Thus, at one point the cap of a lode may appear on the surface, and some distance further the cap may be hundreds of feet below. Usually a shaft is sunk in the “reef” to prove the underlie, and a level, or levels, driven on the course to ascertain its direction underground, also if the gold extends, and if so, how far. This being proved, next a vertical shaft is sunk on the hanging or upper wall side, and the reef is either tapped thereby, or a cross-cut driven to intersect it.
We will now assume that our miners have found their lode payable, and have some hundreds of tons of good gold-bearing stone in sight or at the surface. They must next provide a reducing plant.
Of means for crushing or triturating quartz there is no lack, and every year gives us fresh inventions for the purpose, each one better than that which preceded it, according to its inventor. Most practical men, however, prefer to continue the use of the stamper battery, which is virtually a pestle and mortar on a large scale. Why we adhere to this form of pulverising machine is that, though somewhat wasteful of power, it is easily understood, its wearing parts are cheaply and expeditiously replaced, and it is so strong that even the most perversely stupid workman cannot easily break it or put it out of order.
The stone, being pounded into sand of such degree of fineness as the gold requires, passes through a perforated iron plate called a “grating,” or “screen,” on to an inclined surface of copper plates faced with mercury, having small troughs, or “riffles,” containing mercury, placed at certain distances apart.
The crushed quartz is carried over these copper “tables,” as they are termed, thence over the blanket tables--that is, inclined planes covered with coarse serge, blankets, or other flocculent material--so that the heavy particles may be caught in the hairs, or is passed over vanners or concentrating machines. The resulting “concentrates,” consisting for the most part of sulphides of iron, copper, and lead, are washed off from time to time and reserved for secondary treatment.
First, they are roasted to get rid of the sulphur, arsenic, &c, which would interfere with the amalgamation or lixiviation, and then either ground to impalpable fineness in one of the many triturating pans with mercury, or treated by chlorine or cyanogen.
If, however, we are merely amalgamating, then at stated periods the battery and pans are cleared out, the amalgam rubbed or scraped from the copper plates and raised from the troughs and riffles. It is then squeezed through chamois leather, or good calico will do as well, and retorted in a large iron retort, the nozzle of which is kept in water so as to convert the mercurial vapour again to the metallic form. The result is a spongy cake of gold, which is either sold as “retorted” gold or smelted into bars.
The other and more scientific methods of extracting the precious metal from its matrices, such as lixiviation or leaching, by means of solvents (chlorine, cyanogen, hyposulphite of soda, &c), will be more fully described further on.
CHAPTER II
GOLD PROSPECTING--ALLUVIAL AND GENERAL
It is purposed in this chapter to deal specially with the operation of searching for valuable mineral by individuals or small working parties.
It is well known that much disappointment and loss accrue through lack of knowledge by prospectors, who with all their enterprise and energy are often very ignorant, not only of the probable locality, mode of occurrence, and widely differing appearance of the various valuable minerals, but also of the best means of locating and testing the ores when found. It is for the information of such as these that this chapter is mainly intended, not for scientists or miners of large experience.
All of us who have had much to do with mining know that the majority of the best mineral finds have been made by the purest accident; often by men who had no mining knowledge whatever; and that many valuable discoveries have been delayed, or, when made, abandoned as not payable, from the same cause--ignorance of the rudiments of mineralogy and mining. I have frequently been asked by prospectors, when inspecting new mineral fields, what rudimentary knowledge will be most useful to them and how it can be best obtained.
If a man can spare the time a course of lessons at some accredited school of mines will be, undoubtedly, the best possible training; but if he asks what books he should read in order to obtain some primary technical instruction, I reply: First, an introductory text-book of geology, which will tell him in the simplest and plainest language all he absolutely requires to know on this important subject.
Every prospector should understand elementary geology so far as general knowledge of the history of the structure of the earth’s crust and of the several actions that have taken place in the past, or are now in operation, modifying its conditions. He may with advantage go a few steps further and learn to classify the various formations into systems, groups, and series: but he can acquire all that he need absolutely know from this useful little 2_s._ 6_d._ book.
Next, it is advisable to learn something about the occurrence and appearance of the valuable minerals and the formations in which they are found. For all practical purposes I can recommend Cox and Ratte’s “Mines and Minerals,” one of the Technical Education series of New South Wales, which deals largely with the subject from an Australian standpoint, and is therefore particularly valuable to the Australian miner, but which will be found applicable to most other gold-bearing countries.
I must not, however, omit to mention an admirably compiled multum in parvo volume prepared by Mr. G.
Goyder, jun., Government Assayer and Assay Instructor at the School of Mines, Adelaide. It is called the “Prospectors’ Pocketbook,” costs only one shilling, is well bound, and of handy size to carry. In brief, plain language it describes how a man, having learned a little of assaying, may cheaply provide himself with a portable assay plant, and fluxes, and also gives considerable general information on the subject of minerals, their occurrence and treatment.[1]
[1] Another excellent and really practical book is Prof. Cole’s
“Practical Aids in Geology” (second edition), 10_s._ 6_d._
It may here be stated that twenty-one years ago the author did a large amount of practical silver assaying on the Barrier Hill, which was not then so accessible a place as it is now, and got closely correct results from a number of different mines, with an extemporised plant almost amusing in its simplicity.
All I took from Adelaide were a small set of scales capable of determining the weight of a button down to 20 ozs. to the ton, a piece of cheese cloth to make a screen or sieve, a tin ring 1½ in. diameter, by 1/2 in. high, a small brass door knob to use as a cupel mould, and some powdered borax, carbonate of soda, and argol for fluxes; while for reducing lead I had recourse to the lining of a tea-chest, which lead contains no silver--John Chinaman takes good care of that.
My mortar was a jam tin, without top or bottom, placed on an anvil; the pestle a short steel drill. The blacksmith at Mundi Mundi Station made me a small wrought iron crucible, also a pair of bent tongs from a piece of fencing-wire. The manager gave me a small common red flower pot for a muffle, and with the smith’s forge (the fire built round with a few blocks of talcose schist) for a furnace, my plant was complete.
I burned and crushed bones to make my bone-dust for cupelling, and thus provided made nearly forty assays, some of which were afterwards checked in Adelaide, in each instance coming as close as check assays generally do. Nowadays one can purchase cheaply a very effective portable plant, or after a few lessons a man may by practice make himself so proficient with the blowpipe as to obtain assay results sufficiently accurate for most practical purposes.
Coming then to the actual work of prospecting. What the prospector requires to know is, first, the usual locality of occurrence of the more valuable minerals; secondly, their appearance; thirdly, a simple mode of testing. With respect to occurrence, the older sandy and clay slates, chlorite slates, micaceous, and hornblendic schists, particularly at or near their junction with the intrusive granite and diorite, generally form the most likely geological country for payable mineral lodes, particularly gold, silver and tin.
But those who have been engaged in practical mining for long, finding by experience that no two mineral fields are exactly alike in all their characteristics, have come to the conclusion that it is unwise to form theories as to why metals should or should not be found in certain enclosing rocks or matrices. Some of the best reef gold got in Victoria has been obtained in dead white, milky-looking quartz almost destitute of base metal.
In South Australia reef gold is almost invariably associated with iron, either an oxide, as “gossan;” or ferruginous calcite, “limonite;” or granular silica, conglomerated by iron, the “ironstone” which forms the capping or outcrop of many of our reefs, and which is often rich in gold.
But to show that it is unsafe to decide off-hand in what class of matrix metals will or will not be found, I may say that in my own experience I have seen payable gold in the following materials:--
Quartz, dense and milky, also in quartz of nearly every colour and appearance, saccharoidal, crystalline, nay, even in clear glass-like six-sided prismatic crystals, and associated with silver, copper, lead, arsenic, iron as sulphide, oxide, carbonate, and tungstate, antimony, bismuth, nickel, zinc, lead, and other metals in one form or another; in slate, quartzite, mica schist, granite, diorite, porphyry, felsite, calcite, dolomite, common carbonate of iron, siliceous sinter from a hot spring, as at Mount Morgan; as alluvial gold in drifts formed of almost all these materials; and once, perhaps the most curious matrix of all, a small piece of apparently alluvial gold, naturally imbedded in a shaly piece of coal.
This specimen, I think, is in the Sydney Museum. One thing, however, the prospector may make sure of: he will always find gold more or less intimately associated with silica (quartz) in one or other of its many forms, just as he will always find cassiterite (oxide of tin) in the neighbourhood of granite containing muscovite (white mica), which so many people will persist in terming talc. It is stated to be a fact that tin has never been found more than about two miles from such granite.
From what has been said of its widely divergent occurrence, it will be admitted that the Cornish miners’ saying with regard to metals generally applies with great force to gold: “Where it is, there it is”: and “Cousin Jack” adds, with pathetic emphasis, “and where it is generally, there I ain’t.”
I have already spoken of the geological “country rock” in which reef gold is most likely to be discovered--i.e., the junction of the slates and schists with the igneous or metamorphic (altered) rocks, or in this vicinity. Old river beds formed of gravelly drifts in the same neighbourhood may probably contain alluvial gold, or shallow deposit of “wash,” or hillsides and valleys will often carry good surface gold.
This is sometimes due to the denudation, or wearing away, of the hills containing quartz veins--that is, where the alluvial gold really was derived from such veins, which, popular opinion to the contrary, is not always the case.
Much disappointment and loss of time and money would often be prevented if prospectors would realise that all alluvial gold does not come from the quartz veins or reefs; and that following up an alluvial lead, no matter how rich, will not inevitably develop a payable gold lode.
Sometimes gold, evidently of reef origin, is found in the alluvial; but in that case it is generally fine as regards the size of the particles, more or less sharp-edged, or crystalline in form if recently shed; while such gold is often of poorer quality than the true alluvial which occurs in mammillary (breast-like) nuggets, and is of a higher degree of purity as gold.
The ordinary non-scientific digger will do well to give credence to this view of the case, and will often thereby save himself much useless trouble. Sometimes also the alluvial gold, coarser in size than true reef-born alluvial, is derived almost in situ from small quartz “leaders,” or veins, which the grinding down of the face of the slates has exposed; these leaders in time being also broken and worn, set free the gold they have contained, which does not, as a rule, travel far, but sometimes becomes waterworn by the rubbing over it of the disintegrated fragments of rock.
But the heavy, true alluvial gold, in great pure masses, mammillary, or botryoidal (like a bunch of grapes) in shape, have assuredly been formed by accretion on some metallic base, from gold salts in solution, probably chloride, possibly sulphide or silicate.
Nuggets, properly so-called, are never found in quartz lodes; but, as will be shown later, a true nugget having all the characteristics of so-called waterworn alluvial may be artificially formed on a small piece of galena, or pyrites, by suspending the base metal in the loop of a thread in a weak solution of chloride of gold in which a few hard-wood chips are thrown.
Prospecting for alluvial gold at shallow depths is a comparatively easy process, requiring no great amount of technical knowledge. Usually the first gold is got at or near the surface and then traced to deep leads, if such exist.
At Mount Brown Gold-field, N.S.W., in 1881, I saw claimholders turning out to work equipped only with a small broom made of twigs and a tin dish. With the broom they carefully swept out the crevices of the decomposed slate as it was exposed on the surface, and putting the resulting dust and fragments into the tin dish proceeded to dry blow it.
In “dry blowing” the operator takes the dish about half full of dirt, and standing with his back or side to the wind, if there be any, begins throwing the stuff up and catching it, or sometimes slowly pouring it from one dish to another, the wind in either case carrying away the finer particles. He then proceeds to reduce the quantity by carefully extracting the larger fragments of rock, till eventually he has only a handful or so of moderately fine “dirt” which contains any gold there may be.
If in good sized nuggets it is picked out, if in smaller pieces or fine grains the digger slowly blows the sand and dust aside with his breath, leaving the gold exposed. This process is both tedious and unhealthy, and of course can only be carried out with very dry surface dirt. The material in which the gold occurred at Mount Brown was composed of broken slate and alluvium with a few angular fragments of quartz.
Yet, strange to say, the gold always had a waterworn appearance, probably due to erosion by drifting sand as is so often the case in Westralian so-called alluvial.
Dry blowing is now much in vogue on the West Australian fields owing to the scarcity of water; but the great objection is first, the large amount of dust the unfortunate dry blower has to carry about his person, and secondly, that the peck of dirt which is supposed to last most men a lifetime has to be made a continuous meal of every day.
[Illustration: FIG. 4. PUDDLING TUB.]
[Illustration: PLATE I.--TUB PUDDLING To face p. 18]
For wet alluvial prospecting the appliances, besides pick and shovel, are puddling tub (Fig. 4 and Pl. I.), tin dish, and cradle (Fig. 5 and Pl. II.); the latter, a man handy with tools can easily make for himself.
[Illustration: FIG. 5. SECTIONAL SKETCH OF CRADLE.]
In sinking, the digger should be careful (1) to avoid making his shaft inconveniently small, and (2) not to waste his energy by sinking a huge “new chum” hole, which usually starts by being about three times too large for the requirements at the surface, but narrows in like a funnel at 10 feet or less. A shaft, say 4 feet by 2 feet 6 inches and sunk plumb, the ends being half rounded, is large enough for all requirements to a considerable depth, though I have seen smart men, when they were in a hurry to reach the drift, get down in a shaft even less in size.
The novice who is trying to follow or to find a deep lead must fully understand that the present bed of the surface river may not, in fact seldom does, indicate the ancient watercourses long since buried either by volcanic or diluvial action, which contain the rich auriferous deposits for which he is seeking; and much judgment and considerable underground exploration are often required to decide on the true course of leads. Only by a careful consideration of all the geological surroundings can an approximate idea be obtained from surface inspection alone; and the whole probable conditions which led to the present contour of the country must be carefully taken into account.
How am I to know true bottom when I see it? asks the inexperienced digger. Well, nothing but long experience and intelligent observation will prevent mistakes at times, particularly in deep ground; but as a general rule, though it may sound paradoxical, you may know the bottom by the top.
That is, we will assume you are sinking in, say, 10 to 12 feet ground in a gully on the bank of which the country rock is exposed, and is, say, for instance, a clay slate or sandy slate set at a certain angle; then, in all probability--unless there be a distinct fault or change in the country rock between the slate outcrop and your shaft--the bottom will be a similar slate, standing at the same angle; and this will very probably be overlaid by a deposit of pipeclay, formed by the decomposition of the slates.
From the crevices of these slates, sometimes penetrating to a considerable distance, you may get gold, but it is a useless attempt to sink through them. If the outcropping strata be a soft calcareous (limey) sandstone or soft felspathic rock, and that be also the true “bottom,” great care should be exercised, or one is apt to sink through the bed rock, which may be very loose and decomposed. I have known mistakes made in this way when many feet have been sunk, and driven through what was actually bed rock, though so soft as to deceive even men of experience.
The formation, however, must be the guide, and except in some specially difficult cases, a man can soon tell when he is really on bed rock or “bottom.”
On an alluvial lead the object of every one is to “get on the gutter,” that is, to reach the lowest part of the old underground watercourse, through which for centuries the gold may have been accretionising from the percolation of the mineral-impregnated water; or, when derived from reefs or broken down leaders, the flow of water has acted as a natural sluice wherein the gold is therefore most thickly collected. Sometimes the lead runs for miles and is of considerable width, at others it is irregular, and the gold-bearing “gutter” small and hard to find.
In many instances, for reasons not readily apparent, the best gold is not found exactly at the lowest portion of these narrow gutters, but a little way up the sides. This fact should be taken into consideration in prospecting new ground, for many times a claim has been deserted after cleaning up the “bottom,” and another man has got far better gold considerably higher up on the sides of the gutter.
For shallow alluvial deposits, where a man quickly works out his 30 by 30 feet claim, it may be cheaper at times to “paddock” the whole ground--that is, take all away from surface to bottom, but if he is in wet ground and he has to drive, great care should be taken to properly secure the roof by means of timber. How this may best be done the local circumstances only can decide. In loose or treacherous ground careful attention should be given to timbering, i.e., securing the ground to prevent caving in.
[Illustration: PLATE II.--CRADLING]
CHAPTER III
LODE OR REEF PROSPECTING
The preceding chapter dealt more especially with prospecting as conducted on alluvial fields. I shall now treat of preliminary mining on lodes or “reefs.”
As has already been stated, the likeliest localities for the occurrence of metalliferous deposits are at or near the junction of the older sedimentary formations with the igneous or intrusive rocks, such as granites, diorites, &c. In searching for payable lodes, whether of gold, silver, copper, or even tin in some forms of occurrence, the indications are often very similar.
The first prospecting is usually done on the hilltops or ridges, because, owing to denudation by ice or water which have bared the bedrock, the outcrops are there more exposed, and thence the lodes are followed down through the alluvial covered plains, partly by their “strike” or “trend,” and sometimes by other indicating evidences, which the practical miner has learned to know.
For instance, a lesson in tracing the lode in a grass covered country was taught me many years ago by an old prospector who had struck good gold in the reef at a point some distance to the east of what had been considered the true course. I asked him why he had opened the ground at that particular place. Said he, “Some folks don’t use their eyes. You stand here and look towards that claim on the rise where the reef was last struck. Now, don’t you see there is almost a track betwixt here and there where the grass and herbage is more withered than on either side?
Why? Well, because the hard quartz lode is close to the surface all the way, and there is no great depth of soil to hold the moisture and make the grass grow.”
I have found this simple lesson in practical prospecting of use since.
But the strike or course of a quartz reef is more often indicated by outcrops, either of the silica itself or ironstone “blows,” as the miners call them, but the term is a misnomer, as it argues the easily disproved igneous theory of veins of ejection, meaning thereby that the quartz with its metalliferous contents was thrown out in a molten state from the interior of the earth. This has in no case occurred, and the theory is an impossible one. True lodes are veins of injection formed by the infiltration of silicated waters carrying the metals also in solution.
This water filled the fissures caused either by the cooling of the earth’s crust, or formed by sudden upheavals of the igneous rocks.
Sometimes in alluvial ground the trend of the reef will be revealed by a track of quartz fragments, more or less thickly distributed on the surface and through the superincumbent soil. Follow these, and at some point, if the lode be continuous, a portion of its solid mass will generally be found to protrude and can then again be prospected.
There is no rule as to the trend or strike of lodes, except that a greater number are found taking a northerly and southerly course than one which is easterly and westerly. At all events, such is the case in Australia, but it cannot be said that either has the advantage in being more productive. Some of the richest mines in Australasia have been in lodes running easterly and westerly, while gold, tin, and copper, in great quantity and of high percentage to the ton, have been got in such mines as Mount Morgan, Mount Bischoff, and the Burra, which contain no lodes properly so-called.
Mount Morgan is the richest and most productive gold mine in Australasia and amongst the best in the world.
Its yield for 1895 was 128,699 oz. of gold, valued at £528,700.
Dividends paid in 1895, £300,000.
This mine was opened in 1886. Up to May 31, 1897, the total yield was 1,631,981 ozs. of gold, sold at £6,712,187, from which £4,400,000 have been paid in dividends. (See Mining Journal, for Oct. 9, 1897).
Mount Morgan shareholders have, in other words, divided over 43½ tons of standard gold.
The Burra Burra copper mine, about 100 miles from Adelaide, in a direction a little to the east of north, was found in 1845 by a shepherd named Pickett. It is singularly situated on bald hills standing 130 ft. above the surrounding country. The ores obtained from this mine have been chiefly red oxides, very rich blue and green carbonates, including malachite, and also native copper. The discovery of this mine, supporting, as it did at one time a large population, marked a new era in the history of the colony. The capital invested in it was £12,320 in £5 shares, and no subsequent call was ever made upon the shareholders.
The total amount paid in dividends was £800,000. After being worked by the original owners for some years the mine was sold to a new company, but during the last few years it has not been worked, owing in some degree to the low price of copper and also to the fact that the deposit originally operated upon apparently became exhausted. For many years the average yield was from 10,000 to 13,000 tons of ore, averaging 22 to 23 per cent. of copper. It is stated that, during the twenty-nine and a half years in which the mine was worked, the company expended £2,241,167 in general expenses. The output of ore during the same period amounted to 234,648 tons, equal to 51,622 tons of copper.
This, at the average price of copper, amounted to a money value of £4,749,224. The mine stopped working in 1877.
Mount Bischoff, Tasmania, has produced, since the formation of the Company to December 1895, 47,263 tons of tin ore. It is still in full work and likely to be for years to come.
Each of these immense metalliferous deposits was found outcropping on the summit of a hill of comparatively low altitude. There are no true walls nor can the ore be traced away from the hill in lode form. These occurrences are generally held to be due to hydro-thermal or geyser action.
Then again lodes are often very erratic in their course. Slides and faults throw them far from their true line, and sometimes the lode is represented by a number of lenticular (double-pointed in section) masses of quartz of greater or less length, either continuing point to point or overlapping, “splicing,” as the miners call it (Fig. 6). Such formations are very common in West Australia. All this has to be considered and taken into account when tracing the run of stone.
[Illustration: FIG. 6. LENTICULAR VEIN.]
The tyro also must carefully remember that in rough country where the lode strikes across hills and valleys, the line of the cap or outcrop will apparently be very sinuous owing to the rises and depressions of the surface. Many people even now do not understand that true lodes or reefs are portions of rock or material differing from the surrounding and enclosing strata, and continuing down to unknown depths at varying angles.
Therefore, if you have a north and south lode outcropping on a hill and crossing an east and west valley, the said lode, underlying east, when you have traced its outcrop to the lowest point in the valley, between the two hills, will be found to be a greater or less distance, according to the angle of its dip or underlie, to the east of the outcrop on the hill where it was first seen. If it be followed up the next hill it will come again to the west, the amount of apparent deviation being regulated by the height of the hills and depth of the valley.
A simple demonstration will make this plain. Take a piece of half-inch pine board, 2 ft. long and 9 in. wide, and imagine this to be a lode; now cut a half circle out of it from the upper edge with a fret saw and lean the board say at an angle of 45° to the left, look along the top edge, which you are to consider as the outcrop on the high ground, the bottom of the cut being the outcrop in the valley, and it will be seen that the lowest portion of the cut is some inches to the right; so it is with the lode, and in rough country very nice judgment is required to trace the true course.
For indications, never pass an ironstone “blow” without examination.
Remember the pregnant Cornish saying with regard to mining and the current aphorism, “The iron hat covers the golden head.” “Cousin Jack,” put it “Iron rides a good horse.” The ironstone outcrop may cover a gold, silver, copper, or tin lode.
If you are searching for gold, the presence of the royal metal should be apparent on trial with the pestle and mortar; if silver, either by sight in one of its various forms or by assay, blowpipe or otherwise; copper will reveal itself by its peculiar colour, green or blue carbonates, red oxides, or metallic copper. It is an easy metal to prospect for, and its percentage is not difficult to determine approximately. Tin is more difficult to identify, as it varies so greatly in appearance.
Having found your lode and ascertained its course, you want next to ascertain its value. As a rule (and one which it will be well to remember) if you cannot find payable metal, particularly in gold “reef” prospecting, at or near the surface, it is not worth while to sink, unless, of course, you design to strike a shoot of metal which some one has prospected before you. The idea is exploded that auriferous lodes necessarily improve in value with depth. The fact is that the metal in any lode is not, as a rule, equally continuous in any direction, but occurs in shoots dipping at various angles in the length of the lode, in bunches or sometimes in horizontal layers.
Nothing but actual exploiting with pick, powder, and brains, particularly brains, will determine this point.
Where there are several parallel lodes and a rich chute has been found in one and the length of the payable ore ascertained, the neighbouring lodes should be carefully prospected opposite to the rich spot, as often similar valuable deposits will thus be found. Having ascertained that you have, say, a gold reef payable at surface and for a reasonable distance along its course, you next want to ascertain its underlie or dip, and how far the payable gold goes down.
As a general thing in many parts of Australia--though by no means an inflexible rule--a reef running east of north and west of south will underlie east; if west of north and east of south it will go down to the westward and so round the points of the compass till you come to east and west; when if the strike of the lodes in the neighbourhood has come round from north-east to east and west the underlie will be to the south; if the contrary was the case, to the north. It is surprising how often this mode of occurrence will be found to obtain.
But I cannot too strongly caution the prospector not to trust to theory but to prove his lode and his metal by following it down on the underlie. “Stick to your gold” is an excellent motto. As a general thing it is only when the lode has been proved by an underlie shaft to water level and explored by driving on its course for a reasonable distance that one need begin to think of vertical shafts and the scientific laying out of the mine.
A first prospecting shaft need not usually be more than 5 ft. by 3 ft. or even 5 ft. by 2 ft. 6 in., particularly in dry country. One may often see in hard country stupid fellows wasting time, labour, and explosives in sinking huge excavations as much as 10 ft. by 8 ft. in solid rock, sometimes following down 6 inches of quartz.
When your shaft is sunk a few feet, you should begin to log up the top for at least 3 ft. or 4 ft., so as to get a tip for your “mullock” and lode stuff. This is done by getting a number of logs, say 6 inches diameter, lay one 7 ft. log on each side of your shaft, cut two notches in it 6 ft. apart opposite the ends of the shaft, lay across it a 5 ft. log similarly notched, so making a frame like a large Oxford picture frame. Continue this by piling one set above another till the desired height is attained, and on the top construct a rough platform and erect your windlass (Fig. 7).
If you have an iron handle and axle I need not tell you how to set up a windlass, but where timber is scarce you may put together the winding appliance described in the chapter headed “Rules of Thumb.”
[Illustration: FIG. 7. DOUBLE WINDLASS WITH LOGGED UP BRACE.]
If you have “struck it rich” you will have the pleasure of seeing your primitive windlass grow to a “whip,” a “whim,” and eventually to a big powerful engine, with its huge drum and Eiffel tower-like “poppet heads” or “derrick,” with their great spindle pulley wheels revolving at dizzy speed high in air.
“How shall I know if I have payable gold so as to save time and trouble in sinking?” says the novice. Truly it is a most important part of the prospector’s art, whether he be searching for alluvial or reef gold or any other valuable metal.
I presume you know gold when you see it?
[Illustration: PLATE III.--WHIN. To face p. 28.]
If you don’t, and the doubtful particle is coarse enough, take a needle and stick the point into the questionable specimen. If gold the steel point will readily prick it; if pyrites or yellow mica the point will glance off or only scratch it.
The great importance of the first prospect from the reef is well shown by the breathless intensity with which the two bearded, bronzed pioneer prospectors in some trackless Australian wild bend over the pan in which the senior “mate” is slowly reducing the sample of powdered lode stuff.
How eagerly they examine the last pinch of “black sand” in the corner of the dish. Prosperity and easy times, or poverty and more “hard graft” shall shortly be revealed in the last dexterous turn of the pan. Let us hope it is a “pay prospect.”
The learner, if he be far afield and without appliances of any kind, can only guess his prospect. An old prospector will judge from six ounces of lode stuff within a few pennyweights of what will be the yield of a ton.
I have seen many a good prospect broken with the head of a pick and panned in a shovel, but for reef prospecting you should have a pestle and mortar. The handiest for travelling is a mortar made from a mercury bottle cut in half, and a not too heavy wrought iron pestle with a hardened face. To be particular you require a screen in order to get your stuff to regulated fineness. The best for the prospector, who is often on the move, is made from a piece of cheesecloth stretched over a small hoop.
If you would be more particular take a small spring balance or an improvised scale, such as is described in Mr. Goyder’s excellent little book, p. 14, which will enable you to weigh down to one-thousandth of a grain. It is often desirable to burn your stone before crushing, as it is thus more easily triturated and will reveal all its gold; but remember, that if it originally contained much pyrites, unless a similar course is adopted when treated in the battery, some of the gold will be lost in the pyrites.
Having crushed your gangue to a fine powder you proceed to pan it off in a similar manner to that of washing out alluvial earth, except that in prospecting quartz one has to be much more particular, as the gold is usually finer. The pan is taken in both hands, and enough water to cover the prospect by a few inches is admitted. The whole is then swirled round, and the dirty water poured off from time to time till the residue is clean quartz sand and heavy metal.
Then the pan is gently tipped, and a side to side motion is given to it, thus causing the heavier contents to settle down in the “corner” or angle. Next the water is carefully lapped in over the side, the pan being now tilted at a greater angle until the lighter particles are all washed away. Nearly all the water is got rid of, and the pan is then once more righted, and the small amount of remaining water is passed over the pinch of heavy mineral a few times, when the gold will be revealed in a streak along the bottom.
In this operation, as in all others, only practice will make perfect, and a few practical lessons are worth whole pages of written instruction.
To make an amalgamating assay that will prove the amount of gold which can be got from a ton of your lode, take a number of samples from different parts, both length and breadth. The drillings from the blasting bore-holes collected make the best test.
When finely triturated weigh off one or two pounds, place in a black iron pan (it must not be tinned), with 4 ozs. of mercury, 4 ozs. salt, 4 ozs. soda, and about half a gallon of boiling water; then, with a stick, stir the pulp constantly, occasionally swirling the dish as in panning off, till you feel certain that every particle of the gangue has come in contact with the mercury; then carefully pan off into another dish so as to lose no mercury.
Having got your amalgam clean squeeze it through a piece of chamois leather, though a good quality of new calico previously wetted will do as well. The resulting pill of hard amalgam can then be wrapped in a piece of brown paper, placed on an old shovel, and the mercury driven off over a hot fire; or a clay tobacco pipe, the mouth being stopped with clay, makes a good retort (see “Rules of Thumb,” pipe and potato retorting).
The residue will be retorted gold, which, on being weighed and the result multiplied by 2240 for a 1 lb. assay, or by 1120 for 2 lb., will give the amount of gold per ton which an ordinary battery might be expected to save. Thus 1 grain to the pound, 2240 lbs. to the ton, would show that the stuff contained 4 oz. 13 dwt. 8 gr. per ton.
If there should be much base metal in your sample such as say stibnite (sulphide of antimony), a most troublesome combination to the amalgamator--instead of the formula mentioned above add to your mercury about one dwt. of zinc shavings or clippings, and to your water sufficient sulphuric acid to bring it to about the strength of vinegar (weaker, if anything, not stronger), place your material preferably in an earthenware or enamelled basin if procurable, but iron will do, and intimately mix by stirring and shaking till the mercury has taken up all it can. Retort as before described. This device is my own invention.
Never use the same pan for mercury and for prospecting, as the mercury hides the gold by coating it.
The only genuine test after all is the battery, and that, owing to various causes, is often by no means satisfactory. First, there is a strong, almost unconquerable temptation to select the stone, thus making the testing of a few tons give an unduly high average; but more often the trouble is the other way. The stuff is sent to be treated at some inefficient battery with worn-out mortars, shaky foundations, and uneven tables, sometimes with the plates not half amalgamated, or coated with impurities, the whole concern superintended by a man who knows as little about the treatment of auriferous quartz by the amalgamating or any other process as a dingo does of the differential calculus.
Result: 3 dwt. to the ton in the retort, 30 dwt. in the tailings, and a payable claim declared a “duffer.”
When the lode is really rich, particularly if it be carrying coarse gold, and owing to rough country, or distance, a good battery is not available, excellent results in a small way may be obtained by the somewhat laborious, but simple, process of “dollying.” A dolly is a one man power single stamp battery, or rather an extra sized pestle and mortar (see “Rules of Thumb,” p. 152).
Silver lodes and lodes which frequently carry more or less gold, are often found beneath the dark ironstone “blows,” composed of conglomerates held together by ferric and manganic oxides; or, where the ore is galena, the surface indications will frequently be a whitish limey track, sometimes extending for miles, and nodules or “slugs” of that ore will generally be found on the surface from place to place.
Most silver ores are easily recognisable, and readily tested by means of the blowpipe or simple fire assay. Sometimes the silver on being tested is found to contain a considerable percentage of gold, as in the great Comstock lode in Nevada. Ore from the big Broken Hill silver lode, New South Wales, also contains an appreciable quantity of the more precious metal. A natural alloy of gold, termed electrum, contains 20 per cent. silver.
Tin, lode, and stream, or alluvial, occurs only as an oxide, termed cassiterite, and yet you can well appreciate the compliment one Cornish miner pays to another whose cleverness he wishes to commend, when he says of him, “Aw, he do knaw tin,” when you look at a representative collection of tin ores. In various shapes, from sharp-edged crystals to mammillary-shaped nuggets of wood-tin; from masses of 30 lbs. weight to a fine sand, like gunpowder, in colour black, brown, grey, yellow, red, ruby, white, and sometimes a mingling of several colours, it does require much judgment to know tin.
Stream tin is generally associated with alluvial gold. When such is the case both the gold and the tin can be saved, for the yellow metal is much heavier. As the tin ore is an oxide which is not susceptible to amalgamation, the gold can be readily separated by means of mercury.
Lode tin sometimes occurs in similar quartz veins to those in which gold is got, and is occasionally associated with gold. Tin is also found, as at Euriowie, in dykes, composed of quartz crystals and large scales of white mica, traversing the older slates. A similar occurrence takes place at Mount Shoobridge and at Bynoe Harbour, in the Northern Territory of South Australia; indeed, one could not readily separate the stone from these three places if it were mixed.
As before stated tin will never be found far from granite, and that granite must have white mica as one of its constituents. It is seldom found in the darker coloured rocks, or in limestone country, but it sometimes occurs in gneiss, mica schist, and chlorite schist. Numerous other minerals may be mistaken for tin, such as common tourmaline or schorl, garnet, wolfram (a tungstate of iron with manganese), rutile or titanic acid, blackjack or zinc blende, together with magnetic, titanic, and specular iron in fine grains.
The readiest way of determining whether the ore is tin is by weight, and by scratching or crushing, when, what is called the “streak” is obtained. The colour of the tin streak is whitey-grey, which, when once known, is not easily mistaken. The specific gravity is about 7·0.
Wolfram, which is most like it, is a little heavier, from 7·0 to 7·5, but its streak is red, brown, or blackish-brown. Rutile is much lighter, 4·2, and the streak light-brown; tourmaline is only 3·2. Blackjack is 4·3, and its streak yellowish-white. I have seen several pounds’ weight to the dish got in some of the New South Wales shallow sinking tin-fields, and, as a rule, payable gold was also present. Twenty-three years ago I told Western Australian people that the neighbourhood of the Darling range would produce rich tin, which it has done lately; there is promise of a great development of the tin industry here. The tin “wash” in question is reported to yield payable gold.
Metals are easily distinguished from non-metals by their lustre, toughness, fusibility, opaqueness, conductivity, and rusting. Most metals can be bent, twisted, drawn, and hammered to a degree not possible in non-metals.
Sodium, potassium, lithium, and in a somewhat less degree, calcium, strontium, and barium, will rust almost immediately when exposed to moist air, and their white rusts quickly dissolve in water. Another group of metals, zinc, lead, magnesium, and antimony, have white rusts which are not soluble in water. Their rusts form a thin, adherent coating, which gives the surface of the metal a dull appearance without altogether concealing it. At higher temperatures than ordinary, if the metals are finely divided, the chemical energy of rusting is so great that the metals burn with a vivid light and give off a dense white smoke.
The permanency of these rusts and their protective character are utilised in white paints.
A third group of metals have coloured rusts, e.g., silver, copper, and iron. A fourth group never rust, such as gold and platinum, which occur as metals in the gangue, not as ore from which the metal is produced. In the case of the other metals it is an advantage that they are found in the rust or ore condition, as they can be manufactured much more easily than native metal.
CHAPTER IV
THE GENESIOLOGY OF GOLD--AURIFEROUS LODES
Up to a comparatively recent time it was considered heretical for any one to advance the theory that gold had been deposited where found by any other agency than that of fire. As late as 1860 Mr. Henry Rosales convinced himself, and apparently the Victorian Government also, that quartz veins with their enclosed metal had been ejected from the interior of the earth in a molten state. His essay, which is very ingenious and cleverly written, obtained a prize which the Government had offered, but probably Mr.
Rosales himself would not adduce the same arguments in support of the volcanic or igneous theory to-day. His phraseology is very technical; so much so that the ordinary inquirer will find it somewhat difficult to follow his reasoning or understand his arguments, which have apparently been founded only on the occurrence of gold in some of the earlier discovered quartz lodes, and the conclusions at which he arrived are not borne out by later experience.
He says:--“While, however, there are no apparent signs of mechanical disturbances, during the long period that elapsed from the cooling of the earth’s surface to the deposition of the Silurian and Cambrian systems, it is to be presumed that the internal igneous activity of the earth’s crust was in full force, so that on the inner side of it, in obedience to the laws of specific gravity, chemical attraction, and centrifugal force, a great segregation of silica in a molten state took place.
This molten silica continually accumulating, spreading, and pressing against the horizontal Cambro-Silurian beds during a long period at length forced its way through the superincumbent strata in all directions; and it is abundantly evident, under the conditions of this force and the resistance offered to its action, that the line it would and must choose would be along any continuous and slightly inclined diagonal, at times crossing the strata of the schists, though generally preferring to develop itself and egress between the cleavage planes and dividing seams of the different schistose beds.”
He goes on to say, “Another argument to the same end (i.e., the igneous origin) may be shown from the fact that the auriferous quartz lodes have exercised a manifest metamorphic action on the adjacent walls or casing; they have done so partly in a mineralogical sense, but generally there has been a metamorphic alteration of the rock.” Mr.
Rosales then tells his readers, what we all know must be the case, that the gold would be volatilised by the heat, as would be also the other metals, which he says, were in the form of arseniurets and sulphurets; but he fails to explain how the sublimated metals afterwards reassumed their metallic form. Seeing that, in most cases, they would be hermetically enclosed in molten and quickly solidifying silica they could not be acted on to any great extent by aqueous agency. Neither does Mr.
Rosales’s theory account at all for auriferous lodes; which below water level are composed of a solid mass of sulphide of iron with traces of other sulphides, gold, calcspar, and a comparatively small percentage of silica. Nor will it satisfactorily explain the auriferous antimonial silica veins of the New England district, New South Wales, in which quantities of angular and unaltered fragments of slate from the enclosing rocks are found imbedded in the quartz.
With respect to the metamorphism of the enclosing rocks to a greater degree of hardness, which Mr. Rosales considered was due to heat, it should be remembered that these rocks in their original state were much softer and more readily fusible than the quartz, consequently all would have been molten and mingled together instead of showing as a rule clearly defined walls.
It is much more rational to suppose that the increased hardness imparted to the slates and schists at or near their contact with the lode is due to an infiltration of silica from the silicated solution which at one time filled the fissure. Few scientists can now be found to advance the purely igneous theory of lode formation, though it must be admitted that volcanic action has probably had much influence not only in the formation of mineral veins, but also on the occurrence of the minerals therein.
But the action was hydro-thermal, just such as was seen in course of operation in New Zealand a few years ago when, in the Rotomahana district, one could actually see the growing of the marvellous White and Pink Terraces formed by the release of silica from the boiling water exuding from the hot springs, which water, so soon as the heat and pressure were removed, began to deposit its silica very rapidly; while at the Thames Gold-field, in the same country hot, silicated water continuously boiled out of the walls of some of the lodes after the quartz had been removed and re-deposited a siliceous sinter thereon.
On this subject I note the recently published opinions of Professor Lobley, a gentleman whose scientific reputation entitles his utterances to respect, but who, when he contends that gold is not found in the products of volcanic action is, I venture to think, arguing from insufficient premisses. Certainly his theories do not hold good either in Australasia or America where gold is often, nay, more usually, found at, or near, either present or past regions of volcanic action.
It is always gratifying to have one’s theories confirmed by men whose opinions carry weight in the scientific world. About twenty-four years ago I first published certain theories on gold deposition, which, even then, were held by many practical men, and some scientists, to be open to question. Of late years, however, the theory of gold occurrence by deposition from mineral salts has been accepted by all but the “mining experts” who infest and afflict the gold mining camps of the world.
These opine that gold ought to occur in “pockets” only (meaning thereby their own).
Recently Professor Joseph Le Conte, at a meeting of the American Institute of Mining Engineers, criticised a notable essay on the “Genesis of Ore Deposits,” by Bergrath F. Posepny. The Professor’s general conclusions are:
- “Ore deposits, using the term in its widest sense, may
take place from any kinds of waters, but especially from alkaline
solutions, for these are the natural solvents of metallic
sulphides, and metallic sulphides are usually the original form of
such deposits.”
- “They may take place from waters at any temperature and any
pressure, but mainly from those at high temperature and under heavy
pressure, because, on account of their great solvent power, such
waters are heavily freighted with metals.”
- “The depositing waters may be moving in any direction, up
coming, horizontally moving, or even sometimes down-going, but
mainly up-coming; because by losing heat and pressure at every step
such waters are sure to deposit abundantly.”
- “Deposits may take place in any kind of waterways--in open
fissures, in incipient fissures, joints, cracks, and even in porous
sandstone, but especially in great open fissures, because these are
the main highways of ascending waters from the greatest depths.”
- “Deposits may be found in many regions and in many kinds
of rocks, but mainly in mountain regions, and in metamorphic and
igneous rocks, because the thermosphere is nearer the surface, and
ready access thereto through great fissures is found mostly in
these regions and in these rocks.”
These views are in accordance with nearly all modern research into this interesting and fruitful subject.
Among the theories which they discredit is that ore bodies may usually be assumed to become richer in depth. As applied to gold lodes the teaching of experience does not bear out this view.
If it be taken into account that the time in which most of our auriferous siliceous lodes were formed was probably that indicated in Genesis as before the first day or period when “the earth was without form and void, and darkness was upon the face of the deep,” it will be realised that the action we behold now taking place in a small way in volcanic regions, was probably then almost universal. The crust of the earth had cooled sufficiently to permit water to lie on its surface, probably in hot shallow seas, like the late Lake Rotomahana.
Plutonic action would be very general, and volcanic mud, ash, and sand would be ejected and spread far and wide, which, sinking to the bottom of the water, may possibly be the origin of what we now designate the azoic or metamorphic slates and schists, as also the early Cambrian and Silurian strata.
These, from the superincumbent weight and internal heat, became compacted, and, in some cases, crystallised, while at the same time, from the ingress of the surface waters to the heated regions below, probably millions of geysers were spouting their mineral impregnated waters in all directions; and in places where the crust was thin, explosions of super-heated steam caused huge upheavals, rifts, and chasms, into which these waters returned, to be again ejected, or to be the cause of further explosions.
Later, as the cooling-process continued, there would be shrinkages of the earth’s crust causing other fissures; intrusive granites further dislocated and upheaved the slates.
About this age, probably, when really dry land began to appear, came the first formation of mineral lodes, and the waters, heavily charged with silicates, carbonates of lime, sulphides, &c., in solution, commenced to deposit their contents in solid form when the heat and pressure were removed.
I am aware that part of the theory here propounded as to the probable mode of formation of the immense sedimentary beds of the Archaic or Azoic period is not altogether orthodox--i.e., that the origin of these beds is largely due to the ejection of mud, sand, and ashes from subterraneous sources, which, settling in shallow seas, were afterwards altered to their present form. It is difficult, however, to believe that at this very early period of geologic history so vast a time had elapsed as would be required to account for these enormous depositions of sediment, if they were the result only of the degradation of previously elevated portions of the earth’s surface by water agency.
Glacial action at that time would be out of the question.
But what about the metals? Whence came the metallic gold of our reefs and drifts? What was it originally--a metal or a metallic salt, and if the latter, what was its nature?--chloride, sulphide, or silicate, one, or all three? I incline to the latter hypothesis. All three are known, and the chemical conditions of the period were favourable for their natural production. Assuming that they did exist, the task of accounting for the mode of occurrence of our auriferous quartz lodes is comparatively simple. Chloride of gold is at the present day contained in sea water and in some mineral waters, and would have been likely to be more abundant during the Azoic and early Paleozoic period.
Sulphide of gold would have been produced by the action of sulphuretted hydrogen; hence probably our auriferous pyrites lodes, while silicate of gold might have resulted from a combination of gold chlorides with silicic acid, and thus the frequent presence of gold in quartz be accounted for.
A highly interesting and instructive experiment, showing how gold might be, and probably was, deposited in quartz veins, was carried out by Professor Bischof some years ago. He, having prepared a solution of chloride of gold, added thereto a solution of silicate of potash, whereupon, as he states, the yellow colour of the chloride disappeared, and in half an hour the fluid turned blue, and a gelatinous dark-blue precipitate appeared and adhered to the sides of the vessel.
In a few days moss-like forms were seen on the surface of the precipitate, presumably approximating to what we know as dendroidal gold--that is, having the appearance of moss, fern, or twigs. After allowing the precipitate to remain undisturbed under water for a month or two a decomposition took place, and in the auriferous silicate specks of metallic gold appeared.
From this the Professor argues, and with good show of reason, that as we know now that the origin of our quartz lodes was the silicates contained in certain rocks, it is probable that a natural silicate of gold may be combined with these silicates. If this can be demonstrated, the reason for the almost universal occurrence of gold in quartz is made clear.
About 1870, Mr. Skey, analyst to the New Zealand Geological Survey Department, made a number of experiments of importance in respect to the occurrence of gold. These experiments were summarised by Sir James Hector in an address to the Wellington Philosophical Society in 1872.
Mr. Skey’s experiments disproved the view generally held that gold is unaffected by sulphur or sulphuretted hydrogen gas, and showed that these elements combined with avidity, and that the gold thus treated resisted amalgamation with mercury. Mr. Skey proved the act of absorption of sulphur by gold to be a chemical act, and that electricity was generated in sufficient quantity and intensity during the process to decompose metallic solutions.
Sulphur in certain forms had long been known to exercise a prejudicial effect upon the amalgamation of gold, but this had always been attributed to the combination of the sulphur with the quicksilver used. Now, however, it is certain that the sulphurising of the gold must be taken into account. We must remember that the particles of gold in the stone may be enveloped with a film of auriferous sulphide, by which they are protected from the solvent action of the mercury.
The sulphurisation of the gold gives no ocular manifestation by change of colour or perceptible increase of weight, as in the case of the formation of sulphides of silver, lead and other metals, on account of the extremely superficial action of the sulphur, and hence probably the existence of the gold sulphide escaped detection by chemists.
Closely allied to this subject is the investigation of the mode in which certain metals are reduced from their solutions by metallic sulphides, or, in common language, the influence which the presence of such substances as mundic and galena may exercise in effecting the deposit of pure metals, such as gold, in mineral lodes. The close relation which the richness of gold veins bears to the prevalence of pyrites has been long familiar both to scientific observers and to practical miners. The gold is an after deposit to the pyrites, and, as Mr.
Skey was the first to explain, due to its direct reducing influences. By a series of experiments Mr. Skey proved that the reduction of the metal was due to the direct action of the sulphide, and showed that each grain of iron pyrites, when thoroughly oxidised, will reduce 12¼ grains of gold from its solutions as chloride. He also included salts of platina and silver in this general law, and demonstrated that solutions of any of these metals traversing a vein rock containing certain sulphides would be decomposed, and the pure metal deposited.
We are thus enabled to comprehend the constant association of gold, or native alloys of gold and silver, in veins which traverse rocks containing an abundance of pyrites, whether they have been formed as the result of either sub-aqueous volcanic outbursts or by the metamorphism of the deeper-seated strata which compose the superficial crust of the earth.
Mr. Skey also showed by very carefully conducted experiments that the metallic sulphides are not only better conductors of electricity than has hitherto been supposed, but that when paired they were capable of exhibiting strong electro-motive power. Thus, if galena and zinc blende in acid solutions be connected in the usual manner by a voltaic pair, sulphuretted hydrogen is evolved from the surface of the former, and a current generated which is sufficient to reduce gold, silver or copper from their solutions in coherent electro-plate films.
The attributing of this property of generating voltaic currents, hitherto supposed to be almost peculiar to metals, to the common sulphides found in metalliferous veins, led Mr. Skey to speculate how far the currents discovered to exist in such veins by Mr. E. F.
Fox might be produced by the gradual oxidation of mixed sulphides, and his conclusion is that veins containing bands of different metallic sulphides, bounded by continuing walls, and saturated with mineral waters, may constitute under some circumstances a large voltaic battery competent to produce electro-deposition of metals, and that the order of the deposit of these mineral lodes will be found to bear a definite relation to the order in which the sulphides rank in the table of their electro-motive power.
These researches may lead to some clearer comprehension of the law which regulates the distribution of auriferous veins, and may explain why in some cases the metal should be nearly pure, while in others it is so largely alloyed with silver.
The following extract was lately clipped from a mining paper. If true, the experiment is interesting:--
“An American scientist has just concluded a very interesting
and suggestive experiment. He took a crushed sample of rich ore
from Cripple Creek, which carried 1,100 ozs. of gold per ton, and
digested it in a very weak solution of sodium chloride and sulphate
of iron, making the solution correspond as near as practicable to
the waters found in Nature. The ore was kept in a place having a
temperature little less than boiling water for six weeks, when all
the gold was dissolved, except what would be equal to one ounce
per ton.
A few small crystals of pyrite were then placed in the
bottle of solution, and the gold began immediately to precipitate
on them. It was noticeable, however, that the pyrite crystals which
were free from zinc, galena, or other extraneous matter received no
gold precipitate. Those which had such foreign associations were
beautifully covered with fine gold crystals.”
Experimenting in a somewhat similar direction about eight years ago, I found that the West Australian mine water, mentioned on page 85, with the addition of an acid, was a solvent of gold. The idea of boiling it did not occur to me, as the action was fairly rapid in cold water.
Assuming, then, that gold originally existed as a mineral salt, when and how did it take metallic form? Doubtless, just in the same manner as we now (by means of well-known reagents which are common in nature) precipitate it in the laboratory. With regard to that found in quartz lodes finely disseminated through the gangue, the change was brought about by the same agency which caused the silicic acid to solidify and take the form in which we now see it in the quartz veins.
Silica is soluble in solutions of alkaline carbonates, as shown in New Zealand geysers; the solvent action being increased by heat and pressure, so also would be the silicate or sulphide of gold. When, however, the waters with their contents were released from internal pressure and began to lose their heat the gold would be precipitated together with the salts of some other metals, and would, where the waters could percolate, begin to accretionise, thus forming the heavy or specimen gold of some reefs.
On this class of deposition I shall have more to say when treating of the origin of alluvial gold in the form of nuggets.
Mr. G. F. Becker, of the United States Geological Survey, writing of the geology of the Comstock lode, says:--“Baron Von Richthofen was of opinion that fluorine and chlorine had played a large part in the ore deposition in the Comstock, and this the writer is not disposed to deny; but, on the other hand, it is plain that most of the phenomena are sufficiently accounted for on the supposition that the agents have been merely solutions of carbonic and hydrosulphuric acids. These reagents will attack the bisilicates and felspars.
The result would be carbonates and sulphides of metals, earths, alkalies, and free quartz, but quartz and sulphides of the metals are soluble in solutions of carbonates and sulphides of the earths and alkalies, and the essential constituents of the ore might, therefore, readily be conveyed to openings in the vein where they would have been deposited on relief of pressure and diminution of temperature. An advance boring on the 3000 ft. level of the Yellow Jacket struck a powerful stream of water at 3065 ft.
(in the west country), which was heavily charged with hydrogen sulphide, and had a temperature of 170° F., and there is equal evidence of the presence of carbonic acid in the water of the lower levels. A spring on the 2700 ft. level of the Yellow Jacket which showed a temperature of about 150° F., was found to be depositing a sinter largely composed of carbonates.”
It may be worth while here to speak of the probable reason why gold, and indeed, almost all the metals generally occur in chutes in the lodes; and why, as is often the case, these chutes are found to be more or less in a line with each other in parallel lodes, and why also the junction of two lodes is frequently specially productive. The theory with respect to these phenomena which appears most feasible is, that at these points certain chemical action has taken place, by which the deposition of the metals has been specially induced.
Generally a careful examination of the enclosing rocks where the chute is found will reveal some points of difference from the enclosing rocks at other parts of the course of the lode, and when ore chutes are found parallel in reefs running on the same course, bands or belts of similar country rock will be found at the productive points.
From this we may fairly reason that at these points the slow stream filling the lode cavity met with a reagent percolating from this particular band of rock, which caused the deposition of its metals; and, indeed, I am strongly disposed to believe that the deposition of metals, particularly in some loose lodes, may even now be proceeding. But as in Nature’s laboratory the processes, if certain, are slow, this theory may be difficult to prove.
Why the junction of lodes is often found to be more richly metalliferous than neighbouring parts is probably because there the depositing reagents met. This theory is well put by Mr. S. Herbert Cox, late of Sydney, in his useful book, “Mines and Minerals.” He says:--“It is a well-known fact in all mining districts that the junctions of lodes are generally the richest points, always supposing that this junction takes place in ‘kindly country,’ and the explanation of this we think is simple on the aqueous theory of filling of lodes.
The water which is traversing two different channels of necessity passes through different belts of country, and will thus have different minerals in solution. As a case in point, let us suppose that the water in one lode contained in solution carbonates of lime, and the alkalies and silica derived from a decomposition of felspars; and that the other, charged with hydrosulphuric acid, brought with it sulphide of gold dissolved in sulphide of lime.
The result of these two waters meeting would be that carbonate of lime would be formed, hydrosulphuric acid would be set free, and sulphide of gold would be deposited, as well as silica, which was formerly held in solution by the carbonic acid.”
Most practical men who have given the subject attention will, I think, be disposed to coincide with this view, though there are some who hold that the occurrence of these parallel ore chutes and rich deposits at the junctions of lodes is due to extraneous electrical agency. Of this, however, I have failed to find any satisfactory evidence.
There is, however, proof that lodes are actually re-forming and the action observed is very interesting as showing how the stratification in some lodes has come about. The growth of silica on the sides of the drives has occurred in some of the mines on the Thames gold-fields, New Zealand (p. 36), where in some cases the deposition was so rapid as to be noticeable from day to day, whilst the big pump, which drained all the mines in the vicinity, was actually choked by siliceous deposits.
In old auriferous workings which have been under water for years, in many parts of the world, formations of iron and silica have been found on the walls and roof, while in mining tunnels which have been long unused stalactites composed of silica and calcite have formed. Then, again, experiments made by the late Professor Cosmo Newbery, in Victoria, showed that a distinctly appreciable amount of gold, iron, and silica (the latter in granular form) could be extracted from solid mine timber, which had been submerged for a considerable time.
This reaction then must be in progress at the present time, and doubtless under certain conditions pyrites would eventually take the place of the timber, as is the case with some of the long buried driftwood found in Victorian deep leads. Again, we know that the water from some copper mines is so charged with copper sulphate that if scrap iron be thrown into it, the iron will be taken up by the sulphuric acid, and metallic copper deposited in its place. All this tends to prove that the deposition of metals from their salts, though probably not now as rapid as formerly, is still ceaselessly going on in some place or another where the necessary conditions are favourable.
Quite unexpectedly I lately came across these lines in Dryden’s Annus Mirabilis, verse cxxxix.:--
“As those who unripe veins in mines explore,
On the rich bed again the warm turf lay,
Till time digests the yet imperfect ore,
And know it will be gold another day.”
Is there “any new thing under the sun?”
With regard to auriferous pyritous lodes, it does not appear even now to be clear, as some scientists assert, that their gold is never found in chemical combination with the sulphides of the base metals. On the contrary, I think much of the evidence points in the other direction.
I have long been of opinion that it is really so held in many of the ferro-sulphides and arsenio-ferro sulphides. On this subject Mr. T.
Atherton contributed a short article in 1891 to the Australian Mining Standard which is worthy of notice.
He says, referring to an occurrence of a Natural Sulphide of Gold:--“The existence of gold, in the form of a natural sulphide in conjunction with pyrites, has often been advanced theoretically, as a possible occurrence; but up to the present time has, I believe, never been established as an actual fact.” During my investigations on the ore of the Deep Creek mines, Nambucca, New South Wales, I found in them what I believe to be gold existing as a natural sulphide.
The lode is a large irregular one of pure arsenical pyrites carrying, in addition to gold and silver, nickel and cobalt. It exists in a felsite dyke immediately on the coast. Surrounding it on all sides are micaceous schists, and in the neighbourhood about half a mile distant is a large granite hill about 800 feet high.
In the lode and its walls are large quantities of pyrophyllite, and in some parts of the mine there are deposits of pure white translucent mica, but in the ore itself it is a yellow or pale olive green, and is never absent from the pyrites.
From the first I was much struck with the exceedingly fine state of division in which the gold existed in the ore. After roasting and very carefully grinding down in an agate mortar, I have never been able to get any pieces of gold exceeding one-thousandth of an inch in diameter, and the greater quantity is very much finer than this. Careful dissolving of the pyrites and gangue so as to leave the gold intact failed to find it in any larger diameter. As this was a very unusual experience in investigations on many other kinds of pyrites, I was led further into the matter.
Ultimately, after a number of experiments, there was nothing left but to test for gold existing as a natural sulphide. Taking 200 gr. of gold from a sample assaying 17 oz. fine gold per ton, grinding it finely and heating for some hours with yellow sodium sulphide--on decomposing the filtrate and treating for gold I got a result at the rate of 12 oz. per ton. This was repeated several times with the same result.
This sample came from the lode at the 140 ft. level, whilst samples from the higher levels where the ore is more oxidised, although carrying the gold in exactly the same degree of fineness, do not give as high a percentage of auric sulphide.
It would appear that all the gold in the pyrites (and I have never found any gold existing apart from the pyrites) has originally taken its place there as a sulphide.
The following is an analysis of a general sample insoluble in nitro-sulphuric acid:--
20·532 per cent, consisting of {Silica 13·940 per cent.
{Alumina 6·592 ”
Lime 0·903 ”
Sulphur 16·584 ”
Arsenic 33·267 ”
Iron 27·720 ”
Cobalt 0·964 ”
Nickel Traces.
(5 oz. 3 dwt. 8 gr. per ton) Gold --
(0 oz. 16 dwt.
0 gr. ” ) Silver --
-------
Total 99·970 ”
Professor Newbery, who made many valuable suggestions on the subject, says, speaking of gold in pyritous lodes:--
“As it (the gold salt) may have been in the same solution
that deposited the pyrites, which probably contained its iron in
the form of proto-carbonate with sulphates, it was not easy at
first to imagine any ordinary salt of iron; but this I find can
be accomplished with very dilute solutions in the presence of an
alkaline carbonate and a large excess of carbonic acid, both of
which are common constituents of mineral waters, especially in
Victoria. This is true of chloride of gold, and if the sulphide is
required in solution, it is only necessary to charge the solution
with an excess of sulphuretted hydrogen.
In this manner both
sulphides may be retained in the same solution, depositing gradually
with the escape of the carbonic acid.”
Pyritous lodes usually contain a considerable proportion of calcareous matter, mostly carbonates, and consequently it appears not improbable that the gold may remain in some instances as a sulphide, particularly in samples of pyrites, in which it cannot be detected even by the microscope until by calcination the iron sulphide is changed to an oxide, wherein the gold may be seen in minute metallic specks. The whole subject is full of interest, and careful scientific investigation may lead to astonishing results.
CHAPTER V
THE GENESIOLOGY OF GOLD--AURIFEROUS DRIFTS
Having considered the origin of auriferous lodes, and the mode by which in all probability the gold was conveyed to them and deposited as a metal, it is necessary also to inquire into the derivation of the gold of our auriferous drifts, and the reasons for its occurrence therein.
When quite a lad on the Victorian alluvial fields, I frequently heard old diggers assert that gold grew in the drifts where found. At the time we understood this to mean that it grew like potatoes; and, although not prepared with a scientific argument to prove that such was not so, the idea was generally laughed at. I have lived to learn that these old hard-heads were nearer the truth than possibly they clearly realised, and that gold does actually grow or agglomerate; and, indeed, is probably even now thus growing, though it is likely that the chemical and electric action in the mineral waters flowing through the drifts is not in this age nearly so active as formerly.
Most boys have tried the experiment of dipping a clean-bladed knife into sulphate of copper, and so depositing on the steel a film of copper, which adheres closely until worn away. This is a simple demonstration of a hydro-metallurgical process, though probably young hopeful is not aware of the fact; and it is really by an enlargement of this process that our beautiful and artistic gold-and silver-plated ware is produced.
In the great laboratory of Nature similar chemical depositions have taken place in the past, and may still be in progress; indeed, there is sound scientific reason to suppose that in certain localities this is even now the case, and that in this way much of our so-called alluvial gold has been formed, that is, by the deposition on metallic bases of the gold held in solution.
We will, however, take, to begin with, the generally accepted theory as to the occurrence of alluvial gold. First, let it be said, that certain alluvial gold is unquestionably derived from the denudation of quartz lodes. Such is the gold dust found in many Asiatic and African rivers, in the great placer mines of California, as also the gold dust gained from the beach sand on the west coast of New Zealand, or in the enormous alluvial drifts of the Shoalhaven Valley, New South Wales.
Of the first, many fabulous tales are told to account for its being found in particular spots each summer after the winter floods, and miraculous agency was asserted, while the early beachcombers of the Hokitika district found an equally ridiculous derivation for their gold, which was always more plentiful after heavy weather. They imagined that the breakers were disintegrating some abnormally rich auriferous reefs out at sea, and that the resultant gold was washed up on the beach.
The facts are simply, with regard to the rivers, that the winter floods break down the drifts in the banks and agitate the auriferous detritus, thus acting as natural sluices, and cause the metal to accumulate in favourable spots; whilst on the New Zealand coast the heavy seas breaking on the shingly beach, carry off the lighter particles, leaving behind the gold, which is so much heavier. These beaches are composed, as also are the “terraces” behind, of enormous glacial and fluvial deposits, all containing more or less gold, and extend inland to the foot of the mountains.
It is almost certain that the usually fine gold got by hydraulicing in Californian cañons, in the gullies of the New Zealand Alps, and the great New South Wales drifts, is largely the result of the attrition of the boulders and gravel of moraines, which has thus freed, to a certain extent, the auriferous particles. But when we find large nuggety masses of high carat gold in the beds of dead rivers, another origin has to be sought.
As previously stated, there is fair reason to assume that at least three salts of gold have existed, and, possibly, may still be found, in Nature--silicate, sulphide, and chloride. All of these are soluble and in the presence of certain reagents, also existing naturally, can be deposited in metallic form. Therefore, if, as is contended, reef gold was formed with the reefs from solutions in mineral waters, by inferential reasoning it can be shown that much of our alluvial gold was similarly derived.
The commonly accepted theory, however, is that the alluvial gold of our drifts has been ground out of the solid siliceous lodes by glacial and fluvial action, and that the auriferous leads have been formed by the natural sluicing operations of former streams. To this, however, there are several insuperable objections.
First, how comes it that alluvial gold is usually superior in purity to the “reef” gold immediately adjacent? Second, why are masses of gold, such as the huge nuggets found in Victoria and New South Wales, never been discovered in lodes? Third, why are these heavy masses which, from their specific gravity, should be found only at the very bottom of the drifts, if placed there by water action, sometimes found in all positions from the surface to the bottom of the wash? And, lastly, why is it that when an alluvial lead is traced up to, or down from, an auriferous reef, that the light, angular gold lies close to the reef, while the heavy masses are often bedded much farther away?
Any one who has worked a ground sluice knows how extremely difficult it is with a strong head of water to shift from its position an ounce of solid gold.
What, then, would be the fluvial force required to move the Welcome Nugget? Under certain circumstances, Niagara itself would not be equal to the task.
The generally smooth appearance of alleged alluvial gold is adduced as an argument in favour of its having been carried by water from its original place of deposit, and thus in transit become waterworn; while some go so far as to say that it was shot out of the reefs in a molten state. The latter idea has been already disposed of, but if not, it may be dismissed with the statement that the heat which would melt silica in the masses met with in lodes would sublimate any gold contained, and dissipate it, not in nuggets but in fumes.
With regard to the assumed waterworn appearance of alluvial gold, I have examined with the microscope the smooth surface of more than one apparently waterworn nugget, and found that it was not scratched and abraded, as would have been the case had it been really waterworn, but that it presented the same appearance, though infinitely finer in grain, as the surface of a piece of metal fresh from the electrical plating-bath.
Let us then try if we cannot suggest, if not a complete answer to the many perplexing problems which trouble the alluvial miner, at least a theory that will bear investigation, and by the application of which many apparent paradoxes may be explained. While admitting that certain alluvial gold has been ground out of its siliceous matrix, and distributed and re-collected by water action, we may inquire what would be the result if we extend the experiment of the boy and knife, or the electro-metallurgical bath to alluvial drifts, and show that it is not only possible, but almost certain, that similar action has obtained, and may now be occurring.
Mr. Daintree, of the Victorian Geological Survey, many years ago discovered accidentally that gold chloride would deposit its metal on a metallic base in the presence of any organic substance. Mr. Daintree found that a piece of undissolved gold in a bottle containing chloride of gold in solution had, owing to a portion of the cork having fallen into the liquid, grown or accretionised so much that it could not be extracted through the neck. This led Mr.
Charles Wilkinson, who has contributed much to our scientific knowledge of metallurgy, to experiment further in the same direction.
He says: “Using the most convenient salt of gold, the terchloride, and employing wood as the decomposing agent, in order to imitate as closely as possible the organic matter supposed to decompose the solution circulating through the drifts, I first immersed a piece of cubic iron pyrites taken from the coal formation of Cape Otway, far distant from any of our gold rocks, and therefore less likely to contain gold than other pyrites. The specimen (No. 1) was kept in dilute solution for about three weeks, and is completely covered with a bright film of gold.
I afterwards filed off the gold from one side of a cube crystal to show the pyrites itself and the thickness of the surrounding coating, which is thicker than ordinary notepaper. If the conditions had continued favourable for a very lengthened period, this specimen would doubtless have formed the nucleus of a large nugget. Iron, copper, and arsenical pyrites, antimony, galena, molybdenite, zinc blende, and wolfram were treated in the above manner with similar results. In the above experiments a small chip of wood was employed as the decomposing agent.
In one instance I used a piece of leather. All through the wood and leather gold was disseminated in fine particles, and when cut through the characteristic metallic lustre was brightly reflected. The first six of these sulphides were also operated upon simply in the solution without organic matter, but they remained unaltered.”
Wilkinson found that when the solution of gold chloride was as strong as, say, four grains to the ounce of water, that the pyrites or other base began to decompose, and the iron sulphide changed to yellow oxide, the “gossan” of our lodes, and that though the gold was deposited, this occurred in an irregular way, and it was coated with a dark brown powdery film something like the “black gold,” often found in drifts containing much ferruginous matter. Such were the curious Victorian nuggets Spondulix and Lothair.
Professor Newbery also made a number of similar experiments, and arrived at like results. He states as follows: “I placed a cube of galena in a solution of chloride of gold, with free access of air, and put in organic matter; gold was deposited as usual, in a bright metallic film, apparently completely coating the cube. After a few months the film burst along the edges of the cube, and remained in that state with the cracks open without any further alteration in size or form being apparent.
Upon removing it a few days ago and breaking it open, I found that a large portion of the galena had been decomposed, forming chloride and sulphate of lead and free sulphur, which were mixed together, encasing a small nucleus of undecomposed sulphate of lead. The formation of these salts had exerted sufficient force to burst open the gold coating, which upon the outside had the mammillary form noticed by Wilkinson, while the inside was rough and irregular with crystals forcing their way into the lead salts.
Had this action continued undisturbed, the result would have been a nugget with a nucleus of lead salts, or if there had been a current to remove the results of the decomposition, a nugget without a nucleus of foreign matter.”
But Newbery also made another discovery which still further establishes the probability of the accretionary growth of gold in drifts. In the first experiments both investigators used organic substances as the reagent to cause the deposit of gold on its base, and in each case these substances whether woodchips, leather, or even dead flies, were found to be so absolutely impregnated with gold as to leave a golden skeleton when afterwards burned. Timber found in the Ballarat deep leads has been proved to be similarly impregnated.
Newbery found that gold could also be deposited on sulphurets without any other reagent. He says: “In our mineral sulphurets, however, we have agents which are not only capable of reducing gold and silver from solution, but besides are capable of locating them when so reduced in coherent and bulky masses. Thus the aggregation of the nuggety forms of gold from solution becomes a still more simple matter, only one reagent being necessary, so that there is a greater probability of such depositions obtaining than were a double process necessary.
Knowing the action of sulphides, the manner or the mode of formation of a portion at least of these nuggets seems apparent. Conceive a stream or river fed by springs rising in a country intersected by auriferous reefs, and consequently in this case carrying gold in solution; the drift of such a country must be to a greater or lesser extent pyritous, so that the débris forming the beds of these streams or rivers will certainly contain nodules of such matters disseminated or even stopping them in actual contact with the flow of water.
It follows, then, from what has been previously affirmed, that there will be a reduction of gold by these nodules, and that the metal thus reduced will be firmly attached to them, at first in minute spangles isolated from each other, but afterwards accumulating and connecting in a gradual manner at that point of the pyritous mass most subject to the current until a continuous film of some size appears.
This being formed the pyrites and gold are to a certain extent polarised, the film or irregular but connected mass of gold forming the negative, and the pyrites the positive end of a voltaic pair; and so according as the polarisation is advanced to completion the further deposition of gold is changed in its manner from an indiscriminate to an orderly and selective deposition concentrated upon the negative or gold plate.
The deposition of gold being thus controlled, its loss by dispersion or from the crumbling away of the sustaining pyrites is nearly or quite prevented, a conservative effect which we could scarcely expect to obtain if organic matter were the reducing agent. Meanwhile there is a gradual wasting away of the pyrites or positive pole, its sulphur being oxidised to sulphuric acid and its iron to sesquioxide of iron, or hematite, a substance very generally associated with gold nuggets.
According to the original size of the pyritous mass, the protection it receives from the action of oxidising substances other than gold, the strength of the gold solution, length of exposure to it, the rate of supply and velocity of stream, will be the size of the gold nugget. As to the size of a pyritous mass necessary to produce in this manner a large nugget, it is by no means considerable.
A mass of common pyrites (bisulphide of iron) weighing only 12 lbs. is competent for the construction of the famous ‘Welcome Nugget,’ an Australian find having weight equal to 152 lbs. avoirdupois. Such masses of pyrites are by no means uncommon in our drifts or the beds of our mountain streams. Thus we find that no straining of the imagination is required to conceive of this mode of formation for the huge masses of gold found in Australia in particular, such as the Welcome Nugget, 184 lbs.
9 oz.; the Welcome Stranger, a surface nugget, 190 lbs. after smelting; the Braidwood specimen nugget, 350 lbs., two-thirds gold; besides many other large masses of almost virgin gold which have been obtained from time to time in the alluvial diggings.”
The author has made a number of experiments in the same direction, but more with the idea of demonstrating how possibly gold may in certain cases have been deposited in siliceous formations after such formations had solidified. Some of the results were remarkable and indeed unexpected. I found that I could produce artificial specimens of auriferous quartz from stone which had previously contained no gold whatever, also that it was not absolutely necessary that the stone so treated should contain any metallic sulphides.
The following was contributed by the author and is from the “Transactions” of the Australasian Institute of Mining Engineers for 1893:--
“THE DEPOSITION OF GOLD.
“The question as to how gold was originally deposited in our
auriferous lodes is one to which a large amount of attention has
been given, both by mineralogists and practical miners, and
which has been hotly argued by those who held the igneous theory
and those who pronounced for the aqueous theory. It was held by
the former that as gold was not probably existent in nature in
any but its metallic form, therefore it had been deposited in
its siliceous matrix while in a molten state, and many ingenious
arguments were adduced in support of this contention.
Of late,
however, most scientific men, and indeed many purely empirical
inquirers (using the word empirical in its strict sense) have
come to the conclusion that though the mode in which they were
composed was not always identical, all lodes, including
auriferous formations, were primarily derived from
mineral-impregnated waters which deposited their contents in
fissures caused either by the cooling of the earth’s crust or by
volcanic agency.
“The subject is one which has long had a special attraction for
the writer, who has published several articles thereon, wherein
it was contended that not only was gold deposited in the lodes
from aqueous solution, but that some gold found in form of
nuggets had not been derived from lodes but was nascent in its
alluvial bed; and for this proof was afforded by the fact that
certain nuggets have been unearthed having the shape of an
adjacent pebble or angular fragment of stone indented in them.
Moreover, no true nugget of any great size has ever been found
in a lode such as the Welcome, 2159 oz., or the Welcome
Stranger, 2280 oz.; while it was accidentally discovered some
years ago that gold could be induced to deposit itself from its
mineral salt to the metallic state on any suitable base, such as
iron sulphide.
“Following out this fact, I have experimented with various salts
of gold, and have obtained some very remarkable results. I have
found it practicable to produce most natural looking specimens
of auriferous quartz from stone which previously, as proved by
assay, contained no gold whatever. Moreover, the gold, which
penetrates the stone in a thorough manner, assumes some of the
more natural forms. It is always more or less mammillary, but at
times, owing to causes which I have not yet quite satisfied
myself upon, is decidedly dendroidal, as may be seen in one of
the specimens which I have submitted to members.
Moreover, I
find it possible to moderate the colour and to produce a
specimen in which the gold shall be as ruddy yellow as in the
ferro-oxide gangue of Mount Morgan, or to tone it to the pale
primrose hue of the product of the Croydon mines.
“I note that the action of the bath in which the stone is
treated has a particularly disintegrating effect on many of the
specimens. Some, which before immersion were of a particularly
flinty texture, became in a few weeks so friable that they could
be broken up by the fingers. So far as my experiments have
extended they have proved this, that it was not essential that
the silica and gold should have been deposited at the one time
in auriferous lodes.
A non-auriferous siliceous solution may
have filled a fissure, and, after solidifying, some volcanic
disturbance may have forced water impregnated with a gold salt
through the interstices of the lode formation, when, if the
conditions were favourable, the gold would be deposited in
metallic forms. I prefer, for reasons which will probably be
understood, not to say exactly by what process my results are
obtained, but submit specimens for examination.
“(1) Piece of previously non-gold bearing stone. Locality near
Adelaide, now showing gold freely in mammillary and dendroidal
form.
“(2) Stone from New South Wales, showing gold artificially
introduced in interstices and on face.
“(3) Stone from West Australia, very glassy looking, now
thoroughly impregnated with gold; the mammillary formation
being particularly noticeable.
“(4) Somewhat laminated quartz from Victoria, containing a
little antimony sulphide. In this specimen the gold not only
shows on the surface but penetrates each of the laminations, as
is proved by breaking.
“(5) Consists of fragments of crystallised carbonate of lime
from Tarrawingee, in which the gold is deposited in spots, in
appearance like ferrous oxide, until submitted to the magnifying
glass.
“The whole subject is worthy of much more time than I can
possibly give it. The importance lies in this: That having found
how the much desired metal may have been deposited in its
matrix, the knowledge should help to suggest how it may be
economically extracted therefrom.”
A very remarkable nugget weighing 16¾ oz. was sluiced from near the surface in one of my own mining properties at Woodside, South Australia, some years ago, which illustrated the nuclear theory very beautifully.
This nugget is very irregular in shape, fretted and chased as though with a jeweller’s graving tool, showing plainly the shape of the pyritous crystals on which it was formed while the interstices were filled with red hematite iron just as found in artificially formed nuggets on a sulphide of iron base.
The author has a nugget from the same locality weighing about 1½ oz. which exhibits in a marked degree the same characteristics, as indeed does most of the alluvial gold found in the Mount Lofty Ranges; also a nugget from near the centre of Australia weighing four ounces, in which the original crystals of pyrites are reproduced in gold just as an iron horse-shoe, placed in a launder through which cupriferously impregnated water flows, will in time be changed to nearly pure copper and yet retain its shape.
Now with regard to the points I have put (p. 36) as to the apparent anomalies of occurrence of alluvial gold.
The explanation for alluvial gold being of finer quality as a rule than reef is probably that while gold and silver, which have a considerable affinity for each other, were presumably dissolved from their salts and held in solution in the same mineral water, they would in many cases not be deposited together, for the reason that silver is most readily deposited in the presence of alkalies, which would be found in excess in mineral waters coming direct from the basic rocks, while gold is induced to precipitate more quickly in acid solutions, which would be the character of the waters after they had been exposed to atmospheric action and to contact with organic matters.
This, then, may explain not only the comparatively greater purity of the alluvial gold, but also why big nuggets are found so far from auriferous reefs, and also why heavy masses of gold have been frequently unearthed from among the roots even of living trees, but more particularly in drifts containing organic matter, such as ancient timber.
All, then, that has been adduced goes to establish the belief that the birthplace of our gold is in certain of the earlier rocks comprising the earth’s crust, and that its appearance as the metal that is valued so highly is the result of electro-chemical action, such as we can demonstrate in the laboratory.
CHAPTER VI
GOLD EXTRACTION
We now come to a highly important part of our subject, the practical treatment of ores and matrixes for the extraction of the metals contained. The methods employed are multitudinous, but may be divided into four classes, namely, washing, amalgamating with mercury, chlorinating, cyaniding and other leaching processes, and smelting.
The first is used in alluvial gold and tin workings and in preparing some silver, copper, and other ores for smelting, and consists merely in separating the heavier metals and minerals from their gangues by their greater specific gravity in water. The second includes the trituration of the gangue and the extraction of its gold or silver by means of mercury.
Chlorinating and leaching generally is a process whereby metals are first changed by chemical action into their mineral salts, as chloride of gold, nitrate of silver, sulphate of copper, and being dissolved in water are afterwards re-deposited in the metallic form by means of well-known reagents.
In really successful mining it is in the last degree important that the mode of extraction of metals in the most scientific manner should be thoroughly understood, but as a general rule the science of metallurgy is but very superficially grasped even by those whose special business it is to treat ore bodies in order to extract their metalliferous contents, and whether in quartz crushing mill, lixiviating, or smelting works there is much left to be desired in the method of treating our ores.
My attention was recently attracted to an article written by Mr. F. A.
H. Rauft, M.E., from which I make the following extract:
He says, speaking of the German treatment of ores and the mode
of procedure in Australia, “It is high time that Government stepped
in and endeavoured by prompt and decisive action to bring the mining
industry upon a sound and legitimate basis. Though our ranges abound
in all kinds of minerals that might give employment to hundreds of
thousands of people, mining is carried on in a desultory, haphazard
fashion. There is no system, and the treatment of ores is of
necessity handed over to the tender mercies of men who have not even
an idea of what an intricate science metallurgy has become in older
countries.
During many years of practical experience I have never
known a single instance where a lode, on being worked, gave a return
according to assay, and I have never known any mine where some of
the precious metals could not be found in the tailings or slag.
The
Germans employ hundreds of men in working for zinc which produces
some two or three per cent. to the ton; here the same percentage of
tin could hardly be made payable, and this, mark you, is owing not
to cheaper labour alone, but chiefly to the labour-saving appliances
and the results of the researches of such gigantic intellects
as Professor Kerl and many others, of whom we in this country
never even hear.
Go into any of the great mining works of central
Germany, and you may see acres covered by machinery ingeniously
constructed to clean, break, and sort, and ultimately deliver the
ores into trucks or direct into the furnace, and the whole under the
supervision of a youngster or two.
When a parcel of ore arrives at
any of the works, say Freiberg or Clausthal, it is carefully assayed
by three or four different persons and then handed over to practical
experts, who are expected to produce the full amount of precious
metal according to assay; and if by any chance they do not, a fixed
percentage of the loss is deducted from their salary; or, if the
result is in excess of this assay which is more frequently the case,
a small bonus is added to their pay. Compare this system with our
own wasteful, reckless method of dealing with our precious metals,
and we may hide our heads in very shame.”
All really practical men will, I think, endorse Mr. Rauft’s opinion.
Well organised and conducted schools of mines will gradually ameliorate this unsatisfactory state of things, and I hope before long that we shall have none but qualified certificated men in our mines. In the meantime a few practical hints, particularly on that very difficult branch of the subject, the saving of gold, will, it is hoped, be found of service.
The extraction of gold from the soil is an industry so old that its first introduction is lost in the mist of ages. As before stated, gold is one of the most widely disseminated of the metals, and man, so soon as he had risen from the lowest forms of savagery, began to be attracted by the kingly metal, which he found to be easily fashioned into articles of ornament and use, and to be practically non-corrodable.
What we now term the dish or pan, then, doubtless generally a wooden bowl, was the appliance first used; but they had also an arrangement, somewhat like our modern blanket tables, over which the auriferous sand was passed by means of a stream of water. The sands of some of the rivers from which portions of the gold supply of the old world was derived are still washed over year after year in exactly the same manner as was employed, probably, thousands of years ago, the labour, very arduous, being often carried on by women, who, standing knee deep in water, pan off the sand in wooden bowls much as the digger in modern alluvial fields does with his tin dish.
The resulting gold often consists of but a grain or two of fine gold-dust, which is carefully collected in quills, and so exported or traded for goods.
The digger of to-day having discovered payable alluvial dirt at such a depth as to permit of its being profitably worked by small parties of men with limited or no capital, procures first a half hogshead for a puddling tub, a “cradle,” or “long tom,” and tin dish. The “wash dirt,” as the auriferous drift is usually termed, contains a considerable admixture of clay of a more or less tenacious character, and the bulk of this has to be puddled and so disintegrated before the actual separation of the gold is attempted in the cradle or dish.
This is done in the tub by constantly stirring with a shovel, and changing the water as it becomes charged with the floating argillaceous, or clayey, particles.
The gravel is then placed in the hopper of the cradle which separates the larger stones and pebbles, the remainder passing down over inclined ledges as the cradle is slowly rocked and supplied with water. At the bottom of each ledge is a riffle to arrest the particles of gold.
Sometimes, when the gold is very fine, amalgamated copper plates are introduced and the lower ledges are covered with green baize to act as blanket tables and catch gold which might otherwise be lost.
A long tom (Fig. 8) is a trough some 12 feet in length by 20 inches in width at the upper end, widening to 30 inches at the lower end; it is about 9 inches deep and has a fall of 1 inch to a foot. An iron screen is placed at the lower end (cut off in the manner shown in diagram) where large stones are caught, and below this screen is the riffle box, 12 feet long, 3 feet wide, and having the same inclination as the upper trough. It is fitted with several riffles in which mercury is sometimes placed.
[Illustration: FIG. 8. LONG TOM.]
Much more work can be done with this appliance than with the cradle, which it superseded. Of course, the gold must be coarse and water plentiful.
When, however, the claim is paying, and the diggings show signs of some permanency, a puddling machine is constructed. This is described and illustrated in Chapter XII., called “Rules of Thumb.”
Hydraulicing and ground sluicing is a very cheap and effective method of treating large quantities of auriferous drift, and, given favourable circumstances, such as a plentiful supply of water with good fall and extensive loose auriferous deposits, a very few grains to the ton or load can be made to give payable returns.
[Illustration: FIG. 9. FLUME, GREAT SOUTHERN GOLD-FIELD,
SHOALHAVEN, N.S.W.]
[Illustration: FIG. 10. MONITOR AT WORK, GREAT SOUTHERN
GOLD-FIELD.]
The water is conveyed in flumes (Fig. 9), or pipes to a point near where it is required, thence in wrought iron pipes gradually reduced in size and ending in a great nozzle somewhat like that of a fireman’s hose. The “Monitor,” as it is sometimes called, is generally fixed on a movable stand, so arranged that the strong jet of water can be directed to any point by a simple adjustment (Fig. 10).
A “face” is formed in the drift, and the water played against the lower portion of the ledge, which is quickly undermined, falls, and is soon washed away in the stream of water, which is conducted through sluices with riffles, and sometimes over considerable lengths of amalgamated copper plates. This class of mining has been most extensively carried out in California and New Zealand, and some districts of Victoria, but the truly enormous drifts of the Shoalhaven district in New South Wales must in the near future add largely to the world’s gold supply.
These drifts are auriferous from grass roots to bed rock, extend for nearly fifty miles, and are in places as much as 300 feet deep. Want of capital and want of knowledge has hitherto prevented them being profitably worked on a large scale.
The extraction of reef gold from its matrix is a much more complicated process, and the problem how most effectively to obtain that great desideratum--a complete separating and saving operation--is one which taxes the skill and evokes the ingenuity of scientific men all over the world. The difficulty is that as scarcely any two gangues, or matrixes, are exactly alike, the treatment which is found most effective on one mine will often not answer in another.
Much also depends on the proportion of gold to the ton of rock under treatment, as the most scientific and perfect processes of lixiviation hitherto adopted will not pay, even when all other conditions are favourable, if the amount of gold is much under half an ounce to the ton and even then will leave but a very small profit. If, however, the gold is “free,” and the lode large, a very few pennyweights (or “dollars,” as the Americans say) to the ton will pay handsomely.
The mode of extraction longest in vogue, and after all the cheapest and most effective, for free milling ores where the gold is not too fine, is amalgamation with mercury, which metal has a strong affinity for gold, silver, and copper.
As to crushing appliances, I shall not say much. “Their name is legion for they are many,” and the same may be said of concentrators. It may be old-fashioned, but I admit my predilection is still in favour of the stamper-battery, for the reason that though it may be slower in proportion to the power employed, it is simple and not liable to get out of order, a great advantage when one has so often to depend on men who bring to their work a supply principally of main strength and stupidity. For the same reason I prefer the old draw and lift, and plunger pumps to newer but more complicated water-lifters.
On both these points, however, I am constrained to admit that my opinion has recently been somewhat shaken.
I have lately seen two appliances which appear to mark a new era in the scientific progress of mining. One is the “Griffin Mill,” the other the “Lemichel Siphon Élévateur.”
The first is in some respects on the principle of the Huntingdon Mill.
The latter, if the inventor is to be believed, and the results seem to show he may, will be a wonderful factor in developing not only mining properties where a preponderance of water is the trouble, but also in providing an automatic, and therefore extremely cheap, mode of water-raising and supply, which in simplicity is thus far unexampled.
Atmospheric pressure alone is relied on. The well-known process of the syphon is the basis, but with this essential difference, that a large proportion of the water drawn up to the apex of the syphon is super-elevated to heights regulated by the fall obtained in the outlet leg. This elevation can be repeated almost indefinitely by returning the waste water to the reservoirs.
The Lemichel Syphon (Fig. 11) is a wonderful, yet most simple application of natural force. The inlet leg of the syphon is larger in diameter than the outlet leg, and is provided at the bottom with a valve or “clack.” The outlet leg has a tap at its base. At the apex are two chambers, with an intermediary valve, regulated by a counterpoise weighted lever. The first chamber has also a vertical valve and pipe.
When the tap of the outlet leg is turned, the water flows as in an ordinary syphon, but owing to the rapid automatic opening and shutting of the valve in the first chamber about 45 per cent. of the water is diverted, and may be raised to a height of many feet above the top of the syphon.
It need not be impressed on practical men that if this invention will perform anything like what is claimed for it, its value can hardly be calculated. After a careful inspection of the appliance in operation, I believe it will do all that is stated.
Another invention is combined with this which, by a very small expenditure of fuel, will enable the first point of atmospheric pressure to be attained. In this way the unwatering of mines may be very inexpensively effected, or water for irrigation purposes may be raised from an almost level stream (Fig. 11).
[Illustration: FIG. 11. “LEMICHEL” SYPHON.]
[Illustration: FIG. 12. “GRIFFIN” MILL.]
The Griffin Mill is a centrifugal motion crusher with one roller only, which, by an ingenious application of motive force, revolves in an opposite direction to its initial momentum, and which evolves a force of 6000 lb. against the tire, which is only 30 inches in diameter. For hard quartz the size should be increased by at least 6 inches. It is claimed for this mill that it will pulverise to a gauge of 900 holes to the square inch from 1½ to 2½ tons per hour, or, say roughly, 150 tons per week.
The Huntingdon mill (Fig. 13) is a good crusher and amalgamator where the material to be operated on is comparatively soft, but does not do such good work when the stone is of a hard flinty nature.
[Illustration: FIG. 13. HUNTINGDON MILL.]
A No. 4 Dodge stone-breaker working about 8 hours will keep a five foot Huntingdon Mill going 24 hours, and an automatic feeder is necessary.
For that matter both are almost essential for an ordinary stamper battery, and will certainly increase the crushing capacity and do better work from the greater regularity of the feed.
A 10 h.-p. (nominal) engine of good type is sufficient for Huntingdon mill, rock breaker, self-feeder and steam pump. A five foot mill under favourable circumstances will crush about as much as eight head of medium weight stamps.
[Illustration: FIG. 14. STONE-BREAKER.]
[Illustration: FIG. 15. STONE-BREAKER (SECTIONAL VIEW).]
The Grusonwerk Ball Mills (Fig. 16), made by Krupp of Germany, as also that made by the Austral Otis Company, Melbourne, are fast and excellent triturating appliances for either wet or dry working, but are specially suitable only for ores when the gold is fine and evenly distributed in the stone. The trituration is effected by revolving the stone in a large cylinder together with a number of steel balls of various sizes, the attrition of which with the rock quickly grinds it to powder of any required degree of fineness.
[Illustration: FIG. 16. GRUSONWERK BALL MILL.]
Probably more mines have been ruined by bad mill management than by bad mining, though every experienced man must have seen in his time many most flagrant instances of bungling in the latter respect. Shafts are often sunk on the wrong side of the lode or too near or too far away therefrom, while instances have not been wanting where the (mis)manager has, after sinking his shaft, driven in the opposite direction to that where the lode should be found.
A common error is that of erecting machinery before there is sufficient ore in sight to make it certain that enough can be provided to keep the plant going. In mines at a distance from the centre of management it is almost impossible to check mistakes of this description, caused by the ignorance or over sanguineness of the mine superintendent, and they are often as disastrous as they are indefensible. Another fertile source of failure is the craze for experimenting with untried inventions, alleged to be improvements on well-known methods.
A rule in the most scientific of card games, whist, is “when in doubt lead trumps.” It might be paraphrased for mining thus: “When in doubt about machinery use that which has been proved.” Let some one else do the experimenting.
[Illustration: FIG. 17. DOUBLE FAULTED LODE.]
The success of a quartz mine depends as much on favourable working conditions as on its richness in gold. Thus it may be that a mine carrying 5 or 6 oz. of gold to the ton but badly circumstanced as to distance, mountainous roads, lack of wood and water, in some cases a plethora of the latter, or irregularly faulted country (Fig. 17), may be less profitable than another showing only 5 or 6 dwt., but favourably situated.
It is usually desirable to choose for the battery site, when possible, the slope of a hill which consists of rock that will give a good foundation for your battery.
The economical working depends greatly on the situation, which is generally fixed more or less, in the proximity of the water. The advantages of having ample water for battery purposes, or of using water as a motive power, are so great that it is very often desirable to construct a tramway of considerable length, when, by so doing, that power can be utilised; hence most quartz mills are placed near streams, or in valleys where catchment dams can be effectively constructed, except, of course, in districts where much water has to be pumped from the mine.
If water-power can be used, the water-motor will necessarily be placed as low as possible, in order to obtain the fullest available power. One point is essential. Special care must be taken to keep the appliances above highest flood-level. If the water in the stream is not sufficient to carry off the tailings, the battery should be placed at such a height as to leave sufficient slope for tailings’ dumps. This is more important when treating ore of such value that the tailings are worth saving for secondary treatment. In this case provision should be made for tailings, dams, or slime pits.
Whether the battery is worked by water, steam, or gas power, an ample supply of water is absolutely necessary, at least until some thoroughly effective mode of dry treatment is established. If it can be possibly arranged the water should be brought in by gravitation, and first cost is often least cost; but where this is impossible, pumps of sufficient capacity, not only to provide the absolute quantity used, but to meet any emergency, should be erected.
The purer the water the better it will be for amalgamating purposes, and in cold climates it is desirable to make provision for heating the water supplied to the battery. This can be done by means of steam from the boiler led through the feed tanks; but where the boiler power is not more than required, waste steam from the engine may be employed, but care must be taken that no greasy matter comes in contact with the plates. The exhaust steam from the engine may be utilised by carrying it through tubes fitted in an ordinary 400 gallon tank.
Reducing appliances have often to be placed in districts where the water supply is insufficient for the battery. When this is so every available means must be adopted for saving the precious liquid, such as condensing the exhaust steam from the engine. This may be done by conducting it through a considerable length of ordinary zinc piping, such as is used for carrying the water from house roofs. Also tailings pits should be made, in which the tailings and slimes are allowed to settle, and the cleared water is pumped back to be again used.
These pits should, where practicable, be cemented. It is usual, also, to have one or two tailings dams at different levels; the tailings are run into the upper dam, and are allowed to settle; the slimes overflow from it into the lower dam, and are there deposited, while the cleared water is pumped back to the battery. Arrangements are made by which all these reservoirs can be sluiced out when they are filled with accumulated tailings.
It is well not to leave the sluicing for too long a period, as when the slimes and tailings are set hard they are difficult to remove.
Where a permanent reducing plant is to be erected, whatever form of mill may be adopted, it is better for many reasons to use automatic ore feeders. Of these the best two I have met are the “Tulloch” (Fig. 18), and “Challenge” (Fig. 19) either of which can be adapted to any mill and both do good work.
By their use the reducing capacity of the mill is increased, and the feeding being regular the wear and tear is decreased, while by the regulated feeding of the “pulp” in the battery box or mortar can be maintained at any degree of consistency which may be found desirable, and thus the process of amalgamation will be greatly facilitated. The only objection which can be urged against the automatic feeder is that the steel points of picks, gads, drills, and other tools may be allowed to pass into the mortar or mill, and thus cause considerable wear and tear. A remedy for this is suggested (p. 148).
[Illustration: PLATE IV.--TAIL RACE To face p. 74]
[Illustration: FIG. 18. TULLOCH AUTOMATIC ORE FEEDER.]
[Illustration: FIG. 19. CHALLENGE AUTOMATIC ORE FEEDER.]
If local conditions are favourable and the management good, some mines have paid well with a yield of from 1½ to 4 dwts. of gold per ton of ore; but others have not paid with much higher yields in test crushings.
Great judgment is required in selecting the best possible site for the class of crushing machinery decided upon. The crusher should be as high as can be managed so as to give a good clear run for the tailings and room for the concentrators and amalgamators, &c., below the copper plates and blanket strakes. Solid, strong foundations are essential; many failures are due to a neglect of this point.
In a stamp mill (Fig. 20) the foundations are usually made of hard-wood logs about 5 to 6 feet long, set on end, the bottom end resting on rock and set round with cement concrete. These are bolted together, and the “box” or mortar is bolted to them. The horizontal logs to carry the “horses” or supports for the battery frame should also be of good size, and solidly and securely bolted. The same applies to your engine bed, but whether it be of timber, or mason work, above all things provide that the whole of your work is set out square and true to save after wear and friction. Fig. 21 represents a 10-head stamp mill.
My experience has been that the most effective weight for stamps and height for drop largely depends on the nature of the rock foundation. I have usually found that with medium stamps, say 7½ to 8 cwt. with fair drop and lively action, about 80 falls per minute, the best results were obtained, but the tendency of modern mill men is towards the heavier stamps, 10 cwt. and even heavier.
Great improvements have been made in stamp mills since the sixteenth century, as is evident by comparing Fig. 21A with Figs. 20 and 21; even in the writer’s time they have been considerable.
To find the horse power required to drive a battery, multiply the weight of one stamp by the number of stamps in the battery; the height of lift in feet by the number of lifts per minute; add one-third of the product for friction, and the result will be the number of feet-lbs. per minute; divide this by 33,000 which is the number of feet-lbs. per minute equal to 1 h.-p. and the result will be the h.-p. required.
Thus if a stamp weighs 800 lbs. and you have five in the box, and each stamp has a lift of 9 in. = 0·75 ft. and strikes 80 blows per minute, then ÷ 800 × 5 × 0·75 × 80 = 240,000; one third of 240,000 = 80,000, which added to 240,000 = 320,000; and 320,000 divided by 33,000 = 9·7 h.-p. or 1·9 h.-p. each stamp.
[Illustration: FIG. 20. STAMP MILL, SHOWING PART OF FOUNDATIONS.]
[Illustration: FIG. 21. 10-HEAD STAMP MILL.]
The total weight of a battery, including stamper box, stampers, &c, may be roughly estimated at about 1 ton per stamp. Medium weight stampers, including shank, cam, disc, head, and shoe, weigh from 600-700 lbs., and need about 3/4 h.-p. to work them.
[Illustration: FIG. 21A. SIXTEENTH CENTURY STAMP MILL.]
The quantity of water required for the effective treatment of gold bearing rock in a stamper battery varies according to the composition of the material to be operated upon, but generally it is more than the inexperienced believe. For instance, “mullocky” lode stuff, containing much clayey matter or material carrying a large percentage of heavy metal, such as titanic iron or metallic sulphides, will need a larger quantity of water per stamp than clean quartz. A fair average quantity would be 750 to 1000 gallons per hour for each box of five stamps. In general practice I have seldom found 1000 gallons per hour more than sufficient.
As to the most effective mesh for the screen or grating, that depends largely on the size of the gold particles contained in the gangue. The finer the particles the closer must be the mesh, so that nothing but careful experiment will enable the battery manager to decide this most important point. The American slotted screens are best; they wear better than the punched gratings and can be used of finer gauge. Woven steel wire gauze is employed with good effect in some mills where specially fine trituration is required. This class of screen requires special care as it is somewhat fragile, but with intelligent treatment does good work.
The fall or inclination of the tables, both copper and blanket strakes, is also regulated by the class of ore. If it should be heavy then the fall must be steeper. A fair average drop is 3/4 inch to the foot. Be careful that your copper tables are thoroughly water-tight, for, remember, where water will percolate, mercury will penetrate.
The blanket tables are simply a continuation of the mercury tables, but covered with strips of coarse blanket, green baize, or other flocculent material, intended to arrest the heavier metallic particles which have not been amalgamated.
The blanket table is, however, a very unsatisfactory concentrator at best, and is giving place to mechanical concentrators of various descriptions.
I have a device at present unpatented which will do away with the necessity for blanket tables or copper plates, as by the expenditure of from 1/2 to 1 h.-p. every particle of free gold after leaving the boxes must come within the embrace of a mercury amalgam. No cleaning of plates is required.
An ancient Egyptian gold washing table is shown in Fig. 22. It is a representation of an old stone table such as is referred to in p. 2, which was used by the Egyptians in treating the gold ores of Lower Egypt. The ore was first ground, it is likely by means of some description of stone arrastra, and then passed over the sloping table with water, the gold being retained in the riffles. In these the material would probably be mechanically agitated. Although for its era ingenious it will be plain to practical men that if the gold were fine the process would be very ineffective.
Possibly, but of this I have no evidence, mercury was used to retain the gold in the riffles, for, as previously stated, this method was known to the ancients.
[Illustration: FIG 22. WASHING TABLE OF STONE WITH RIFFLES.]
At a mine at which I was managing director the lode was almost entirely composed of sulphide of iron, carbonate of lime or calcspar, with a little silica. In this case it was found best to crush without mercury, then run the pulp into pans, where it was concentrated. The concentrates were calcined in a common reverberatory furnace, and afterwards amalgamated with mercury in a special pan; the results were very satisfactory; but it does not follow that this process would be the most suitable for a slightly different lode stuff.
I was lately consulted with respect to the treatment of a pyritic ore in a very promising mine, but could not recommend the above treatment, because though the pyrites in the gangue was similar, the bulk of the lode consisted of silica, consequently there would be a great waste of power in triturating the whole of the stuff to what, with regard to much of it, would be an unnecessary degree of fineness. I am of opinion that in cases such as this, where it is not intended to adopt the chlorination or cyanogen process, it will be found most economical to crush to a coarse gauge, concentrate, calcine the concentrates, and finally amalgamate in some suitable amalgamator.
Probably for this mode of treatment Krom rolls would be found more effective reducing agents than stampers, as with them the bulk of the ore can be broken to any required gauge and there would consequently be less loss in “slimes.”
The great art in effective battery work is to crush your stuff to the required fineness only, and then to provide that each particle is brought into contact with the mercury either in box, trough plate, or pan. To do this the flow of water must be carefully regulated; it should not carry the stuff off too quickly nor allow the troughs and plates to be choked. In cold weather the water may be warmed by passing the feed-pipe through a tank into which the steam from the engine exhausts, and this will be found to keep the mercury bright and lively. But be careful no engine oil or grease mingles with the water, as grease on the copper tables will absolutely prevent amalgamation.
The first point, then, is to effectively crush the gangue, the degree of fineness being regulated by the fineness of the gold itself. This being done, then comes the question of saving the gold. If the quartz be clean, and the gold unmixed with base metal, the difficulty is small.
All that is required is to ensure that each particle of gold shall be taken up by the mercury.
The main object is to arrest the gold at the earliest possible stage; therefore, if you are treating clean stone containing free gold, either coarse or fine, I advise the use of mercury in the boxes, for the reason that a considerable proportion of the gold will be caught thereby, and settling to the bottom, or adhering to amalgamated plates in the boxes, where such are used, will not be afterwards affected by the crushing action, which might otherwise break up, or “flour,” the mercury.
On the whole, I rather favour the use of mercury in the box at any time, unless the ore is very refractory--that is, contains too great a proportion of base metals, particularly sulphides of iron, arsenic, &c., when the result will not be satisfactory, but may entail great loss by the escape of floured mercury carrying with it particles of gold. Intelligent experience will assist the battery manager to adopt the right system.
The crushed stuff--generally termed the “pulp”--passes from the boxes through the “screens” or “gratings,” and so on to the “tables”--i.e., sheets of copper amalgamated on the upper surface with mercury, and sometimes electroplated with silver and afterwards treated with mercury.
Unless the quartz is very clean, and, consequently light, I am opposed to the form of stamper box with mercury troughs cast in the “lip,” nor do I think that a trough under the lip is a good arrangement, as it usually gets so choked and covered with the heavy clinging base metals as to make it almost impossible for the gold to come in contact with the mercury. It will be found better where the gold is fine, or the gangue contains much base metal, to run the pulp from the lip of the battery into a “distributor.”
The distributor is a wooden box the full width of the stamper box or mortar, having a perforated iron bottom set some three to four inches above the first copper plate, which should come up under the lip. The effect of this arrangement is that the pulp is dashed on to the plate by the falling water, and the gold at once coming in contact with the mercury begins to accumulate and attract that which follows, till the amalgam becomes piled in little crater-shaped mounds, and thus 75 per cent. of the gold is saved on the top plate.
I have tried a further adaptation of this process when treating ores containing a large percentage of iron oxide, where the bulk of the gold is impalpably fine, and contained in the “gossan.” At the end of the blanket table, or at any point where the crushed stuff last passes before going to the “tailings heap” or “sludge pit,” a “saver” is placed. The saver is a strong box about 15 in. square by 3 ft. high, one side of which is removable, but must fit tight.
Nine slots are cut inside at 4 in. apart, and into these are fitted nine square perforated copper plates, having about eighty to a hundred 1/4 in. holes in each; the perforations should not come opposite each other. These plates are to be amalgamated on both sides with mercury, and the top plate “fed” from time to time with mercury, in which a very little sodium has been placed.
If acid ores are being treated, zinc should be employed in place of sodium, and to prevent the plates becoming bare, if the stuff is very poor, thick zinc amalgam may be used with good effect; but in that case discontinue the sodium, and occasionally, if required, say once or twice in the day, mix an ounce of sulphuric acid in a half gallon of water and slowly pour it into the launder above the saver. Underneath the “saver” you require a few riffles, or troughs, to catch any waste mercury, but if not overfed there should be no waste.
This automatic appliance sometimes arrests a considerable quantity of gold.
We now come to the subsidiary processes of battery work, the “cleaning” of plates, and “scaling” same when it is desired to get all the gold off them, the cleaning and retorting of amalgam, and of the mercury, smelting gold, &c.
Plates should be tenderly treated, kept as smooth as possible, and when cleaning up after crushing, in your own battery, the amalgam--except, say, at half-yearly intervals--should be removed with a rubber only; the rubber is simply a square of black india-rubber or soft pine wood.
[Illustration: FIG. 23. SCRAPER.]
When crushing rich ore, and you want to get nearly all the gold off your plates, the scraper (Fig. 23) may be resorted to. This is usually made by the mine blacksmith from an old flat file which is cut in half, the top turned over, beaten out to a sharp blade, and kept sharp by touching it up on the grinding-stone. This, if carefully used, will remove the bulk of the amalgam without injury to the plate.
Various methods of “scaling” plates will be found among “Rules of Thumb.”
Where base metals are present in the lode stuff frequent retortings of the mercury, say not less than once a month, will be found to have a good effect in keeping it pure and active. For this purpose, and in order to prevent stoppage of the machinery, a double quantity is necessary, so that half may be used alternately.
Less care is required in retorting the mercury than in treating the amalgam, as the object in the one case is more to cleanse the metal of impurities than to save gold, which will for the most part have been extracted by squeezing through the chamois leather or calico.
A good strong heat may therefore at once be applied to the retort and continued, the effect being to oxidise the arsenic, antimony, lead, &c., which, in the form of oxides, will not again amalgamate with the mercury, but will either lie on its surface under the water, into which the nozzle of the retort is inserted, or will float away on the surface of the water. I have also found that covering the top of the mercury with a few inches of broken charcoal when retorting has an excellent purifying effect.
In retorting amalgam, much care and attention is required.
First, never fill the retort too full, give plenty of room for expansion; for, when the heat is applied, the amalgam will rise like dough in an oven, and may be forced into the discharge pipe, the consequence being a loss of amalgam or the possible bursting of the retort. Next, be careful in applying the heat, which should be done gradually, commencing at the top. This is essential to prevent waste and to turn out a good-looking cake of gold, which all battery managers like to do, even if they purpose smelting into bars.
Sometimes special difficulties crop up in the process of separating the gold from the amalgam. At the first “cleaning up” on the Frasers Mine at Southern Cross, West Australia, great consternation was excited by the appearance of the retorted gold, which, as an old miner graphically put it, was “as black as the hind leg of a crow,” and utterly unfit for smelting, owing to the presence of base metals. Some time after this I was largely interested in the Blackborne mine in the same district when a similar trouble arose. This I succeeded in surmounting, but a still more serious one was too much for me--i.e., the absence of payable gold in the stone.
I give here an extract from the Australian Mining Standard, of December 9th, 1893, with reference to the mode of cleaning the amalgam which I adopted.
NEW METHOD OF SEPARATING GOLD FROM IMPURE AMALGAM.
I had submitted to me lately a sample of amalgam from a mine in West Australia which amalgam had proved a complete puzzle to the manager and amalgamator. The Mint returns showed a very large proportion of impurity, even in the smelted gold. When retorted only, the Mint authorities refused to take it after they had treated the first two cakes, one of 119 oz., which yielded only 35 oz. 5 dwt. standard gold, and one of 140 oz., which gave 41 oz. 10 dwt. The gold smelted on the mine was nearly as bad proportionately.
Thus, 128 oz. smelted down at the Mint to 87 oz. 8 dwt. and 109 oz. to 55 oz. 10 dwt. The impurity was principally iron, a most unusual thing in my experience, and was due to two causes revealed by assay of the ore and analysis of the mine water, viz., an excess of arsenate of iron in the stone, and the presence in large proportions of mineral salts, principally chloride of calcium CaCl_{2}, sodium NaCl, and magnesium MgCl_{2}, in the mine water used in the battery. The exact analysis of the water was as follows:--
Carbonate of Iron FeCO₃ 2·76 grains per gallon
Carbonate of Calcium CaCO₃ 7·61 ” ”
Sulphate of Calcium CaSO₄ 81·71 ” ”
Chloride of Calcium CaCl₂ 2797·84 ” ”
Chloride of Magnesium MgCl₂ 610·13 ” ”
Chloride of Sodium or
Common Salt NaCl 5072·65 ” ”
----------
Total solid matter 8572·70 = 19·5 oz. to the
gallon.
It will be seen, then, that this water is nearly four times more salt than that of the sea. The effect of using a water of this character, as I have previously found, is to cause the amalgamation of considerable quantities of iron with the gold as in this case.
I received 10 oz. of amalgam, and having found what constituted its impurities proceeded to experiment as to its treatment. When retorted on the mine it was turned out in a black cake so impure as almost to make it impossible to smelt properly. I found the same result on first retorting, and after a number of experiments which need not be recapitulated, though some were fairly effective, I hit on the following method, which proved to be most successful and will probably be so found in other localities where similarly unfavourable conditions prevail.
I took a small ball of amalgam, placed it in a double fold of new fine-grained calico, and after soaking in hot water put it under a powerful press. The weight of the ball before pressing was 1583 gr.
From this 383 gr. of mercury were expressed and five-eighths of a grain of gold was retorted from this expressed mercury. The residue, in the form of a dark, grey, and very friable cake, was powdered up between the fingers and retorted, when it became a brown powder; it was afterwards calcined on a flat sheet in the open air; result, 510 gr. of russet-coloured powder. Smelted with borax, the iron oxide readily separated with the slag; result, 311 gr. gold 871-1000 fine; a second smelting brought this up to 914-1000 fine. Proportion of smelted gold to amalgam, one-fifth.
The principal point about this mode of treatment is the squeezing out of the mercury, whereby the amalgam goes into the retort in the form of powder, thus preventing the slagging of the iron and enclosure of the gold. The second point of importance is thorough calcining before smelting.
Of course it would be practicable, if desired, to treat the powder with hydrochloric acid, and thus remove all the iron, but in a large way this would be too expensive, and my laboratory treatment, though necessarily on a small scale, was intended to be on a practical basis.
The amalgam at this mine was in this way afterwards treated with great success.
For the information of readers who do not understand the chemical symbols it may be said that
FeCO₃ is carbonate of iron;
CaCO₃ is carbonate of calcium;
CaSO₄ is sulphate of calcium;
CaCl₂ is chloride of calcium;
MgCl₂ is chloride of magnesium;
NaCl is chloride of sodium, or common salt
CHAPTER VII
GOLD EXTRACTION--SECONDARY PROCESSES AND LIXIVIATION
Before any plan is adopted for treating the ore in a new mine the management should very seriously and carefully consider the whole circumstances of the case, taking into account the quantity and quality of the lode stuff to be operated on, and ascertain by analysis what are its component parts, for, as before stated, the treatment which will yield most satisfactory results with a certain class of gangue on one mine will sometimes, even when the material is apparently similar, prove a disastrous failure in another.
Some time since I was glad to note that the manager of what has since become a very prominent Australian mine strongly discountenanced the purchase of any extracting plant until he was fully satisfied as to the character of the bulk of the ore he would have to treat. It would be well for the pockets of shareholders and the reputation of managers if more of our mine superintendents followed this prudent and sensible course.
Having treated on gold extraction with mercury by amalgamated plates and their accessories, something must be said about secondary modes of saving in connection with the amalgamation process. The operations described hitherto have been the disintegration of the gold-bearing material and the extraction therefrom of the coarser free gold.
But it must be understood that most auriferous lode stuff contains a proportion of sulphides of various metals, wherein a part of the gold, usually in a very finely divided state, is enclosed, and on this gold the mercury has no influence. Also many lodes contain hard heavy ferric ores, such as titanic iron, tungstate of iron, and hematite, in which gold is held.
In others, again, are found considerable quantities of soft powdery iron oxide or “gossan,” and compounds such as limonite, aluminous clay, &c., which, under the action of the crushing mill become finely divided and float off in the water as “slimes,” carrying with them atoms of gold, often microscopically small. To save the gold in such matrixes as these is an operation which even the best of our mechanical appliances have not yet fully accomplished.
Where there is not too great a proportion of base metals on which the solvent will act, and when the material is rich enough in gold to pay for the extra cost of treatment, chlorination or cyanisation are the best modes of extraction yet practically adopted.
Presuming, however, that we are working by the amalgamation process, and have crushed our stone and obtained the free gold, the next requirement is an effective concentrator to secure the heavy base metals which hold a percentage of gold. There are many, and some do excellent work, but do not act equally well in all circumstances. The first and most primitive is the blanket table (p. 79); but it can hardly be said to be very effective, and requires constant attention and frequent changing and washing of the strips of blanket.
Instead of blanket tables percussion tables are sometimes used, to which a jerking motion is given against the flow of the water and pulp, and by this means the heavier minerals are gathered towards the upper part of the table, and are removed when concentrated. I have seen this appliance doing fairly good work, but it is by no means a perfect concentrator.
Another form of “shaking table” is one with a lateral motion, and this, whether with amalgamated plates, or provided with small riffles, or covered with blanket, keeps the pulp lively and encourages the retention of the heavier particles, whether of gold or base metals containing gold. There has also been devised a rocking table, the action of which is analogous to that of the ordinary miner’s cradle. This appliance, working somewhat slowly, swings on rockers from side to side, and is usually employed in mills where, owing to the complexity of the ore, difficulties have been met with in amalgamating the gold.
Riffles are provided and even very fine gold is sometimes effectively recovered by their aid.
The Frue vanner will, as a rule, act well when the pulp is sufficiently and consistently fine. It is an adaptation of the old simple apparatus used in China and India for washing gold dust from river sand. The original consisted of an endless band of strong cloth or closely woven matting, run on two horizontal rollers placed about seven feet apart, one being some inches lower than the other. The upper is caused to revolve by means of a handle. The cloth is thus dragged upwards against a small stream of water and sand fed to it by a second man, the first man not only turning the handle but giving a lateral motion to the band by means of a rope tied to one side.
[Illustration: FIG. 24. FRUE VANNER.]
Chinamen were working these forerunners of the Frue vanner fifty years ago in Australia, and getting fair returns.
The Frue vanner (Fig. 24) is an endless india-rubber band drawn over an inclined table, to which a revolving and side motion is given by ingenious mechanism, the pulp being automatically fed from the upper end, and the concentrates collected in a trough containing water in which the band is immersed in its passage under the table; the lighter particles wash over the lower end. The only faults with the vanner are--first, it is rather slow; and secondly, though so ingenious it is just a little complicated in construction for the average non-scientific operative.
Of pan concentrators there is an enormous selection, the principle in most being similar--i.e., a revolving muller, which triturates the sand, so freeing the tiny golden particles and admitting of their contact with the mercury. The mistake with respect to most of these machines is the attempt to grind and amalgamate in one operation.
Even when the stone under treatment contains no deleterious compounds the simple action of grinding the hard siliceous particles has a bad effect on the quicksilver, causing it to separate into small globules, which either oxidising or becoming coated with the impurities contained in the ore will not reunite, but wash away in the slimes and take with them a percentage of the gold. As a grinder and concentrator, and in some cases as an amalgamator, when used exclusively for either purpose, the Watson and Denny pan (Fig.
25) is effective; but although successfully used at one mine I know, the mode there adopted would, for reasons previously given, be very wasteful in many other mines.
[Illustration: FIG. 25. WATSON AND DENNY PAN.]
There is much misconception, even among men with some practical knowledge, as to the proper function of these saving appliances; and sometimes good machines are condemned because they fail to perform work they were not intended for.
It cannot be too clearly realised that the correct order of procedure for extracting the gold held in combination with base metals is--first, reduction of the particles to a uniform gauge and careful concentration only; next, the dissipation, usually by simple calcination, of substances in the concentrates inimical to the thorough absorption of the gold by the mercury; and lastly, the amalgamation of the gold and mercury.
For general purposes, where the gangue has not been crushed too fine, I think the Duncan pan will usually be found effective in saving the concentrates. In theory it is an enlargement of the alluvial miner’s tin dish, and the motion imparted to it is similar to the eccentric motion of that simple separator.
The calcining may be effectively carried out in an ordinary reverberatory furnace, the only skill required being to prevent over “roasting” and so slagging the concentrates; or not sufficiently calcining so as to remove all deleterious constituents; the subject, however, is fully treated in Chapter VIII.
For amalgamating I prefer some form of settler to any further grinding appliance, but I note also improvements in the rotary amalgamating barrel, which, though slow, is, under favourable conditions, an effective amalgamator. The introduction of steam under pressure into an iron cylinder containing a charge of concentrates with mercury is said to have produced good results, and I am quite prepared to believe such would be the case, as we have long known that the application of steam to ores in course of amalgamation facilitates the process considerably.
Some twenty-five years since I also was engaged on the construction of a dry amalgamator in which sublimated mercury was passed from a retort through the descending gangue in a vertical cylinder, the material falling therefrom through an aperture into a revolving settler, the object being to save water on mines in dry country.
The model, about quarter size, was completed, when my attention was called to an American invention, in which the same result was stated to be attained more effectively by blowing the mercury spray through the triturated material by means of a steam jet. I had already encountered a difficulty, since found so obstructive by experimentalists in the same direction, that is, the getting of the mercury back into its liquid metallic form.
This difficulty can be largely obviated by my own device of using a very weak solution of sulphuric acid (it can hardly be too weak) and adding a small quantity of zinc to the mercury. It is perfectly marvellous how some samples of mercury “sickened” or “floured” by bad treatment, may be brought back to the bright, clean, easy flowing metal by a judicious use of these inexpensive materials.
Thus it will probably be found practicable to crush dry and amalgamate semi-dry by passing the material in the form of a thin pasty mass to a settler, as in the old South American arrastra, and, by slowly stirring, recover the mercury, and with it the bulk of the gold.
The following is from the Australian Mining Standard, and was headed “Amalgamation Without Overflow”:
“Recent experiments at the Ballarat School of Mines have proved
that a deliverance from difficulties is at hand from an unexpected
quarter. The despised Chilian mill and Wheeler pan, discarded at
many mines, will solve the problem, but the keynote of success is
amalgamation without overflow. Dispense with the overflow and the
gold is saved.
“Two typical mines--the Great Mercury Proprietary Gold Mine,
of Kuaotunu, N.Z., the other, the Pambula, N.S.W.--have lately
been conducting a series of experiments with the object of saving
their fine gold in an economical manner. The last and best trials
made by these companies were at the Ballarat School of Mines, where
amalgamation without overflow was put to a crucial test, in each
case with the gratifying result that ninety-six per cent. of the
precious metal was secured.
What this means to the Great Mercury
Mine, for instance, can easily be imagined when it is understood
that notwithstanding all the latest gold-saving adjuncts during the
last six months 1260 tons of ore, worth £4. 17_s._ 10-2/3_d._ a ton,
have been put through for a saving of £1 9_s._ 1-2/3_d._ only; or
in other words over two-thirds of the gold has gone to waste (for
the time being) in the tailings, and in the tailings at the present
moment lie the dividends that should have cheered shareholders’
hearts.
“And now for the modus operandi, which, it must be remembered,
is not hedged in by big royalties to any one, rights, patent or
otherwise. The ore to be treated is first calcined, then put through
a rock-breaker or stamper battery in a perfectly dry state. If the
battery is used, ordinary precautions, of course, must be taken
to prevent waste, or the dust becoming obnoxious to the workmen.
The ore is then transferred to the Chilian mill and made to the
consistency of porridge, the quicksilver being added.
When the
principal work of amalgamation is done (experience soon teaching the
amount of grinding necessary), from the Chilian mill the paste (so
to say) is passed to a Wheeler or any other good pan of a similar
type, when the gold-saving operation is completed.”
This being an experiment in the same direction as my own, I tried it on a small scale. I calcined some very troublesome ore till it was fairly “sweet,” triturated it, and having reduced it with water to about the consistency of invalid’s gruel, put it into a little berdan pan made from a “camp oven,” which I had used for treating small quantities of concentrates, and from time to time drove a spray of mercury, wherein a small amount of zinc had been dissolved, into the pasty mass by means of a steam jet, added about half an ounce of sulphuric acid and kept the pan revolving for several hours. The result was an unusually successful amalgamation and consequent extraction--over ninety per cent.
Steam--or to use the scientific term, hydro-thermal action--has played such an important part in the deposition of metals that I cannot but think that under educated intelligence it will prove a powerful agent in their extraction. Twenty-five years ago I obtained some rather remarkable results from simply boiling auriferous ferro-sulphides in water. There is in this alone an interesting, useful, and profitable field for investigation and experiment.
The most scientific and perfect mode of gold extraction (when the conditions are favourable) is lixiviation by means of chlorine, potassium cyanide, or other aurous solvent, for by this means as much as 98 per cent. of the gold contained in suitable ores can be converted into its mineral salt, and being dissolved in water, re-deposited in metallic form for smelting; but lode stuff containing much lime would not be suitable for chlorination, or the presence of a considerable proportion of such a metal as copper, particularly in metallic form, would be fatal to success, while cyanide of potassium will also attack metals other than gold, and hence discount the effect of that solvent.
The earlier practical applications of chlorine to gold extraction were known as Mears’ and Plattner’s processes, and consisted in placing the material to be operated on in vats with water, and introducing chlorine gas at the bottom, the mixture being allowed to stand for a number of hours, the minimum about twelve, the maximum forty-eight. The chlorinated water was then drawn off containing the gold in solution which was deposited as a brown powder by the addition of sulphate of iron.
Great improvements on this slow and imperfect method have been made of late years, among the earlier of which was that of Messrs. Newbery and Vautin. They placed the pulp with water in a gas-tight revolving cylinder, into which the chlorine was introduced, and atmospheric air to a pressure of 60 lb. to the square inch was pumped in.
The cylinder with its contents was revolved for two hours, then the charge was withdrawn and drained nearly dry by suction, the resultant liquid being slowly filtered through broken charcoal on which the chloride crystals were deposited, in appearance much like the bromo-chlorides of silver ore seen on some of the black manganic oxides of the Barrier silver mines.
The charcoal, with its adhering chlorides, was conveyed to the smelting-house and the gold smelted into bars of extremely pure metal.
Messrs. Newbery and Vautin claimed for their process decreased time for the operation with increased efficiency.
At Mount Morgan, when I visited that mine in the eighties, they were using what might be termed a composite adaptation process. Their chlorination works, the largest in the world, were putting through 1500 tons per week. The ore as it came from the mine was fed automatically into Krumm roller mills, and after being crushed and sifted to regulation gauge was delivered into trucks and conveyed to the roasting furnaces, and thence to cooling floors, from which it was conveyed to the chlorinating shed.
Here were long rows of revolving barrels, on the Newbery-Vautin principle, but with this marked difference, that the pressure in the barrel was obtained from an excess of the gas itself, generated from a charge of chloride of lime and sulphuric acid. On leaving the barrels the pulp ran into settling vats, somewhat on the Plattner plan, and the clear liquid having been drained off was passed through a charcoal filter, as adopted by Newbery and Vautin. The manager, Mr.
Wesley Hall, stated that the estimated cost per ton was not more than 30_s._, and he expected shortly to reduce that when he began making his own sulphuric acid. As he was obtaining over 4 oz. to the ton the process was paying very well, but it will be seen that the price would be prohibitive for poor ores unless they could be concentrated before calcination.
The Pollok process is a newer, and stated to be a cheaper mode of lixiviation by chlorine. It is the invention of Mr. J. H. Pollok, of Glasgow University, and a strong Company was formed to work it. With him the gas is produced by the admixture of bisulphate of sodium (instead of sulphuric acid, which is a very costly chemical to transport) and chloride of lime. Water is then pumped into a strong receptacle containing the material for treatment and powerful hydraulic pressure is applied. The effect is stated to be the rapid change of the metal into its salt, which is dissolved in the water and afterwards treated with sulphate of iron, and so made to resume its metallic form.
It appears, however, to me that there is no essential difference in the pressure brought to bear for the quickening of the process. In each case it is an air cushion, induced in the one process by the pumping in of air to a cylinder partly filled with water, and in the other by pumping in water to a cylinder partly filled with air.
The process of extracting gold from lode stuff and tailings by means of cyanide of potassium is now largely used and may be thus briefly described:--It is chiefly applied to tailings, that is, crushed ore that has already passed over the amalgamating and blanket tables. The tailings are placed in vats, and subjected to the action of solutions of cyanide of potassium of varying strengths down to 0·2 per cent. These dissolve the gold, which is leached from the tailings, passed through boxes in which it is precipitated either by means of zinc shavings, electricity, or other precipitant. The solution is made up to its former strength and passed again through fresh tailings.
When the tailings contain a quantity of decomposed pyrites, partly oxidised, the acidity caused by the freed sulphuric acid requires to be neutralised by an alkali, caustic soda being usually employed.
When “cleaning up,” the cyanide solution in the zinc precipitating boxes is replaced by clean water. After careful washing in the box, to cause all pure gold and zinc to fall to the bottom, the zinc shavings are taken out. The precipitates are then collected, and after calcination in a special furnace for the purpose of oxidising the zinc, are smelted in the usual manner.
The following description of an electrolytic method of gold deposition from a cyanide solution was given by Mr. A. L. Eltonhead before the Engineers’ Club of Philadelphia.
A description of the process is as follows:--“The ore is crushed to a certain fineness, depending on the character of the gangue. It is then placed in leaching vats, with false bottoms for filtration, similar to other leaching plants. A solution of cyanide of potassium and other chemicals of known percentage is run over the pulp and left to stand a certain number of hours, depending on the amount of metal to be extracted. It is then drained off and another charge of the same solution is used, but of less strength, which is also drained.
The pulp is now washed with clean water, which leaches all the gold and silver out, and leaves the tailings ready for discharge, either in cars or sluiced away by water, if it is plentiful.
“The chemical reaction of cyanide of potassium with gold is as follows, according to Elsner:--
₂Au + ₄KCy + O + H₂O = ₂KAuCy₂ + ₂KHO.
That is, a double cyanide of gold and potassium is formed.
“All filtered solutions and washings from the leaching vats
are saved and passed through a precipitating ‘box’ of novel
construction, which may consist either of glass, iron or wood,
and be made in any shape, either oval, round, or rectangular--if
the latter, it will be about 10 ft. long, 4 ft. wide and 1 ft.
high--and is partitioned off lengthwise into five compartments.
Under each partition, on the inside or bottom of the ‘box,’ grooves
may be cut a quarter-to a half-inch deep, extending parallel with
the partitions to serve as a reservoir for the amalgam, and give a
rolling motion to the solution as it passes along and through the
four compartments.
The centre compartment is used to hold the lead
or other suitable anode and electrolyte.
“The anode is supported on a movable frame or bracket, so it
may be moved either up or down as desired, it being worked by
thumb-screws at each end.
“The electrolyte may consist of saturated solutions of soluble
alkaline metals and earths. The sides or partitions of each
compartment dip into the mercury, which must cover the ‘box’ evenly
on the bottom to the depth of about a half-inch.
“Amalgamated copper strips or discs are placed in contact with
the mercury and extended above it, to allow the gold and silver
solution of cyanide to come in contact.
“The electrodes are connected with the dynamo; the anode of
lead being positive and the cathode of mercury being negative. The
dynamo is started, and a current of high amperage and low voltage
is generated, generally 100 to 125 amperes, and with sufficient
pressure to decompose the electrolyte between the anode and the
cathode.
“As the gas is generated at the anode, a commotion is created
in the liquid, which brings a fresh and saturated solution of
electrolyte between the electrodes for electrolysis, and makes it
continuous in its action.
“The solution of double cyanide of gold, silver, and potassium,
which has been drained from the leaching vats, is passed over the
mercury in the precipitating ‘box’ when the decomposition of the
electrolyte by the electric current is being accomplished, the
gold and silver are set free and unite with the mercury, and are
also deposited on the plates or discs of copper, forming amalgam,
which is collected and made marketable by the well-known and tried
methods. The above solution is regenerated with cyan
Edition notice Project Gutenberg source, credits & licence
The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.
Transcriber and production notes
Transcriber’s Notes
A few obvious misprints have been corrected (for example,
“thorinum” for thorium), but in general the original spelling
has been retained. Inconsistent use of hyphens and punctuation
were left unchanged.
The italics markup has been removed from table headings. Text
appearing in small capitalisation has been converted to title case.Front matter as received (title page, contents)
Trancribers Note.
Text appearing in italic and bold font in the original
publication are shown inside _..._ and =...= markup respectively.
Some whole numbers and fractional parts are displayed as 10-2/3.
GETTING & GOLD.
GRIFFIN’S STANDARD PUBLICATIONS.
Fourth Edition, Revised. Fully Illustrated. 21s.
=THE METALLURGY OF GOLD=. By T. KIRKE ROSE, D.Sc. Lond.,
Assoc. R.S.M., Chemist and Assayer to the Royal Mint.
“Adapted for all who are interested in the Gold Mining Industry,
being free from technicalities as far as possible, but is more
particularly of value to those engaged in the industry.”--_Cape
Times._
“A Comprehensive Practical Treatise on this important
subject.”--_The Times._
* * * * *
Medium 8vo. With numerous Plates, Maps, and Illustrations. 21s. net.
=CYANIDING GOLD AND SILVER ORES=: A Practical Treatise on the Cyanide
Process. By H. FORBES JULIAN, and EDGAR SMART, A.M.I.C.E.
“A handsome volume of 400 pages which will be a valuable book of
reference for all associated with the process.”--_Mining Journal._
* * * * *
Large Crown 8vo. Third English Edition. Fully Illustrated, 7s. 6d.
=THE CYANIDE PROCESS OF GOLD EXTRACTION=. By Professor JAMES PARK,
F.G.S., M.Inst.M.M.
“We can confidently recommend this book as a thoroughly
practical work, and congratulate the author at its continued
success.”--_Chemical News._
* * * * *
In Crown 8vo. Illustrated. Fancy Cloth Boards. Price 4s. 6d.
=GOLD SEEKING IN SOUTH AFRICA=; A Handbook of Hints for intending
Explorers, Prospectors, and Settlers. By THEO. KASSNER, Mine
Manager.
“The Prospector ought to include this book in his library of
reference, and the stay-at-home reader will be interested and
informed by its contents.”--_Mining World._
* * * * *
Third Edition, Revised. With Illustrations. Handsome cloth, 5s.
=PROSPECTING FOR MINERALS=. By S. HERBERT COX, Assoc. R.S.M., M.Inst.
M.M., F.G.S., &c.
“This EXCELLENT HANDBOOK will prove a perfect _vade-mecum_
to those engaged in the practical work of Mining and
Metallurgy.”--_Times of Africa._
* * * * *
Large 8vo. Cloth. Fully Illustrated. 12s. 6d. net.
=METALLURGICAL ANALYSIS AND ASSAYING=: A THREE YEARS’ COURSE FOR
STUDENTS OF SCHOOLS OF MINES. By W. A. MACLEOD, B.A., B.Sc.,
A.O.S.M., and CHAS. WALKER, F.C.S.
“The publication of this volume tends to prove that the teaching
of metallurgical analysis and assaying in Australia rests in
competent hands.”--_Nature._
* * * * *
In Large 4to. Library Style. Beautifully Illustrated with 20
Plates, many in Colours, and 94 Figures in the Text. £2, 2s. net.
=PRECIOUS STONES=: THEIR PROPERTIES, OCCURRENCES, AND USES. By Dr. MAX
BAUER. Translated by L. J. SPENCER, M.A. (Cantab.), F.G.S.
“The plates are remarkable for their beauty, delicacy, and
truthfulness. A glance at them alone is a lesson on precious
stones.”--_Athenæum._
* * * * *
London: CHARLES GRIFFIN & CO., Limited, Exeter St., Strand.
[Illustration: THE PROSPECTOR.--DISHWASHING OR PANNING
_Frontispiece_]
=GETTING GOLD=:
=A PRACTICAL TREATISE=
FOR
=PROSPECTORS, MINERS, AND STUDENTS=.
BY
=J. C. F. JOHNSON, F.G.S.,=
MEMBER OF THE AUST. INST. OF MINING ENGINEERS;
AUTHOR OF “PRACTICAL MINING,” “THE GENESIOLOGY OF GOLD,” ETC.
=THIRD EDITION.=
_=WITH 50 ILLUSTRATIONS AND 8 PLATES.=_
[Illustration: CHARLES GRIFFIN AND COMPANY LIMITED 1820]
LONDON:
CHARLES GRIFFIN AND COMPANY, Limited;
EXETER STREET, STRAND.
1904.
[_All rights reserved._]
* * * * *Header as received
The Project Gutenberg eBook of Getting Gold: A Gold-Mining Handbook for Practical Men
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.
Title: Getting Gold: A Gold-Mining Handbook for Practical Men
Author: J. C. F. Johnson
Release date: June 24, 2013 [eBook #43027]
Most recently updated: October 23, 2024
Language: English
Other information and formats: www.gutenberg.org/ebooks/43027
Credits: Produced by Kevin Handy, Sue Fleming, John Hagerson and
the Online Distributed Proofreading Team at
http://www.pgdp.netFull Project Gutenberg licence
Updated editions will replace the previous one—the old editions will
be renamed.
Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for an eBook, except by following
the terms of the trademark license, including paying royalties for use
of the Project Gutenberg trademark. If you do not charge anything for
copies of this eBook, complying with the trademark license is very
easy. You may use this eBook for nearly any purpose such as creation
of derivative works, reports, performances and research. Project
Gutenberg eBooks may be modified and printed and given away—you may
do practically ANYTHING in the United States with eBooks not protected
by U.S. copyright law. Redistribution is subject to the trademark
license, especially commercial redistribution.
START: FULL LICENSE
THE FULL PROJECT GUTENBERG™ LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg™ mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase “Project
Gutenberg”), you agree to comply with all the terms of the Full
Project Gutenberg License available with this file or online at
www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project Gutenberg
electronic works
1.A. By reading or using any part of this Project Gutenberg
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the person
or entity to whom you paid the fee as set forth in paragraph 1.E.8.
1.B. “Project Gutenberg” is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg
electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation (“the
Foundation” or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg mission of promoting
free access to electronic works by freely sharing Project Gutenberg
works in compliance with the terms of this agreement for keeping the
Project Gutenberg name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg License when
you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg work. The Foundation makes no
representations concerning the copyright status of any work in any
country other than the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg License must appear
prominently whenever any copy of a Project Gutenberg work (any work
on which the phrase “Project Gutenberg” appears, or with which the
phrase “Project Gutenberg” is associated) is accessed, displayed,
performed, viewed, copied or distributed:
This eBook is for the use of anyone anywhere in the United States and most
other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg™ License included with this eBook or online
at www.gutenberg.org. If you
are not located in the United States, you will have to check the laws
of the country where you are located before using this eBook.
1.E.2. If an individual Project Gutenberg electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase “Project
Gutenberg” associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg
trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg License for all works
posted with the permission of the copyright holder found at the
beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg.
1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg License.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg work in a format
other than “Plain Vanilla ASCII” or other format used in the official
version posted on the official Project Gutenberg website
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original “Plain
Vanilla ASCII” or other form. Any alternate format must include the
full Project Gutenberg License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg works
unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg electronic works
provided that:
• You pay a royalty fee of 20% of the gross profits you derive from
the use of Project Gutenberg works calculated using the method
you already use to calculate your applicable taxes. The fee is owed
to the owner of the Project Gutenberg trademark, but he has
agreed to donate royalties under this paragraph to the Project
Gutenberg Literary Archive Foundation. Royalty payments must be paid
within 60 days following each date on which you prepare (or are
legally required to prepare) your periodic tax returns. Royalty
payments should be clearly marked as such and sent to the Project
Gutenberg Literary Archive Foundation at the address specified in
Section 4, “Information about donations to the Project Gutenberg
Literary Archive Foundation.”
• You provide a full refund of any money paid by a user who notifies
you in writing (or by e-mail) within 30 days of receipt that s/he
does not agree to the terms of the full Project Gutenberg™
License. You must require such a user to return or destroy all
copies of the works possessed in a physical medium and discontinue
all use of and all access to other copies of Project Gutenberg™
works.
• You provide, in accordance with paragraph 1.F.3, a full refund of
any money paid for a work or a replacement copy, if a defect in the
electronic work is discovered and reported to you within 90 days of
receipt of the work.
• You comply with all other terms of this agreement for free
distribution of Project Gutenberg™ works.
1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg™ electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from the Project Gutenberg Literary Archive Foundation, the manager of
the Project Gutenberg™ trademark. Contact the Foundation as set
forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg™ collection. Despite these efforts, Project Gutenberg™
electronic works, and the medium on which they may be stored, may
contain “Defects,” such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
of Replacement or Refund” described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg™ trademark, and any other party distributing a Project
Gutenberg™ electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg™ electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg™
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg work, and (c) any
Defect you cause.
Section 2. Information about the Mission of Project Gutenberg
Project Gutenberg is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.
Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg’s
goals and ensuring that the Project Gutenberg collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non-profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation’s EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state’s laws.
The Foundation’s business office is located at 41 Watchung Plaza #516,
Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
to date contact information can be found at the Foundation’s website
and official page at www.gutenberg.org/contact
Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation
Project Gutenberg™ depends upon and cannot survive without widespread
public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine-readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.
The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular state
visit www.gutenberg.org/donate.
While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.
International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate.
Section 5. General Information About Project Gutenberg electronic works
Professor Michael S. Hart was the originator of the Project
Gutenberg concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg eBooks with only a loose network of
volunteer support.
Project Gutenberg eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.
Most people start at our website which has the main PG search
facility: www.gutenberg.org.
This website includes information about Project Gutenberg,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.Source: Project Gutenberg ebook #43027. Public-domain status is recorded per item; the licence text above is reproduced unchanged.