Indoor and Outdoor Recreations for Girls
by Lina Beard · English · Gutenberg #42549 · 383,247 chars · public domain (US)
The Project Gutenberg eBook of Indoor and Outdoor Recreations for Girls
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.
Title: Indoor and Outdoor Recreations for Girls
Author: Lina Beard
Adelia B. Beard
Release date: April 16, 2013 [eBook #42549]
Most recently updated: October 23, 2024
Language: English
Other information and formats: www.gutenberg.org/ebooks/42549
Credits: Produced by Chris Curnow, Emmy and the Online Distributed
Proofreading Team at http://www.pgdp.net (This file was
produced from images generously made available by The
Internet Archive)
*** START OF THE PROJECT GUTENBERG EBOOK INDOOR AND OUTDOOR RECREATIONS FOR GIRLS ***
[Transcriber's Note: Bold text is surrounded by =equal signs= and italic
text is surrounded by _underscores_.]
RECREATIONS FOR GIRLS
[Illustration]
Indoor
and
Outdoor
RECREATIONS FOR GIRLS
BY
Lina Beard and Adelia B. Beard
New York
Charles Scribner's
Sons
1914
COPYRIGHT, 1904, 1906, by
CHARLES SCRIBNER'S SONS
SPECIAL NOTICE
The publishers hereby give warning that the
unauthorized printing of any portion of the text of
this book, and the reproduction of any of the
illustrations or diagrams, are expressly forbidden.
EXPLANATORY NOTE TO NEW EDITION
SINCE the publication of this volume two years ago as "Handicraft and
Recreation for Girls," it has occurred to us that "Recreations" alone
much more accurately defines the contents, for the handicrafts
represented are only those that in effect are recreations. Therefore we
have thought it best to drop the word Handicraft and issue the new
edition under the more appropriate title, "Recreations for Girls."
LINA BEARD
ADELIA B. BEARD.
September, 1906.
PREFACE
THIS book, like a girl's life, is divided into two parts: occupation and
amusement, or handicraft and recreation.
It is not equally divided, for handicraft is so much more like play than
work, and is so entertaining in itself, we find difficulty in drawing a
distinct line between that and recreation. The one insists upon blending
with the other and the book, after all, is a book of entertainment.
With the old handicrafts coming back into favor and new ones constantly
being brought forward, a girl's life may be full of delightful
employment. To work with joyous enthusiasm and self-reliant energy, as
well as to play with light-hearted enjoyment, cannot fail to make her
sensible, wholesome, and happy, and it is with this end in view that we
have written and illustrated the book. Our wish is to help our girl
friends to make the most of their girlhood and to enjoy it to its
fullest extent.
We have had practical experience in the actual working out of all the
various handicrafts and recreations, and therefore give only that which
we know can be well and easily done by the average girl.
Thanks are due to the _Delineator_, _Harper's Bazar_, _Woman's Home
Companion_, and _Good Housekeeping_, for their courtesy in promptly
returning for this work the original drawings and material used in their
respective magazines.
THE AUTHOR.
FLUSHING, August 2, 1904.
CONTENTS
PART I
HANDICRAFT
CHAPTER I. PAGE
SPINNING 3
The Spinning-Wheel, 4; The Spindle, 5; The Distaff, 7;
Thoroughly Cleaned, 8; The Band, 8; To Adjust the Band,
9; The Flax, 10; Practice, 11; How to Spin, 12; When
the Thread Breaks, 12.
CHAPTER II.
WEAVING ON A HOME-MADE LOOM 15
The Pin Loom, 16; The Heddles, 17; The Shuttle, 19; To
Adjust the Warp, 19; The Woof, 20; How to Weave a
Miniature Navajo Blanket, 20; Blankets for Dolls' Beds,
26.
CHAPTER III.
A BALL OF TWINE AND WHAT MAY BE MADE OF IT 27
Making a Little Hammock, 27; How to Tie the Twine, 29;
A School-Bag, 31; Twine Curtains, 34.
CHAPTER IV.
AN ARMFUL OF SHAVINGS, AND WHAT TO DO WITH THEM 36
Selecting the Shavings, 36; A Soft Little Basket, 36;
How to Prepare the Shavings, 37; How to Weave the
Shavings, 39; Bind the Edges, 40; The Handle, 40; A
Handkerchief Case, 41.
CHAPTER V.
PRIMITIVE REED CURTAINS 43
The Reeds, 43; Raw Material, 43; The Twine-Stick Weave,
44; The Finished Curtain, 46; Curtain-Bee Frolic, 48;
Door-way Screens, 49.
CHAPTER VI.
THINGS TO MAKE OF COMMON GRASSES 53
A Grasshopper House, 53; A Doll's Hammock, 56; A
Bouquet-Holder, 58; Weaving a Napkin-Ring, 59.
CHAPTER VII.
POSSIBILITIES OF A CLOTHES LINE 62
Adapted to Decoration, 62; Rope Wood-Basket, 62; Rope
Net Fringe, 65; The Tassels, 65.
CHAPTER VIII.
HOW TO WEAVE A SPLINT BASKET 68
The Material, 68; The Spokes, 68; The Weavers, 70;
Weaving the Basket, 71; Binding Off, 71; Trimming, 73.
CHAPTER IX.
MODELLING IN TISSUE-PAPER 75
Modelling a Chicken, 75; A Turkey, 81; The Sturdy
Little Elephant, 83.
CHAPTER X.
NATURE STUDY WITH TISSUE-PAPER 86
All Flowers from Squares and Circles, 86; The Best
Models, 86; Material, 87; The Carnation, 87; How to Cut
a Circle, 88; The Morning-Glory, 94; The Daffodil, 99.
CHAPTER XI.
A NEW RACE OF DOLLS 103
Dolls of Substance and Form, 103; The Paper, 104; Making
the Head, 104; The Arms, 105; The Body, 105; The Legs,
106; The Feet and Shoes, 107; Doll's Hair, 106; The
Dress, 108; The Cap, 110.
CHAPTER XII.
AN INDIAN ENCAMPMENT ON A PASTRY-BOARD 111
The Ground, 111; The Wigwam, 112; Decorating the Wigwam,
114; The Fire, 114; The Doll Indian, 115; The War
Head-Dress, 116; A Travois, 118; Pipe of Peace, 119; A
Perfect Little Tomahawk, 120; The Chieftain's Shield,
120; Arrow-Heads and Arrows, 122; A Bow That Will
Shoot, 124; The Doll Squaw, 125; Squaw's Chamois Gown,
125; Primitive Loom and Navajo Blanket, 125; Papoose,
130; Cradle for Papoose, 130; Indian Money, 131; Wampum
Necklace, 131.
CHAPTER XIII.
A TOY COLONIAL KITCHEN WITH FAC-SIMILE COLONIAL FURNISHINGS 133
The Floor, 135; The Fireplace, 138; A Hair-pin Crane,
138; Little Dutch Oven, 139; Two Andirons, 141; The
Fire, 142; Iron Pot, 143; The Peel, 144; The Toaster,
144; Pot-Hooks, 145; The Spinning-Wheel, 147; The
Little Spinner, 150; The Costume, 150; Flint-Lock
Rifle, 151; The Bellows, 153; Colonial Pewter Dish,
154; Grandfather's Clock, 155; Colonial Churn, 160.
CHAPTER XIV.
LITTLE PAPER HOUSES OF JAPAN 162
How the People Live, 162; The House, 162; The Floors,
167; The Fence, 168; The Gateway, 169; Birthday
Festivals, 169; The Koi, 171; A Kago, 172.
CHAPTER XV.
SOME ODD THINGS IN RUSSIA 175
The Coronation Cathedral, 175; Door-way, 177; Cupolas,
178; A Russian Peasant Doll, 180; A Little Samovar,
182.
CHAPTER XVI.
POTTERY WITHOUT A POTTER'S WHEEL 185
Primitive Pottery, 185; The Clay, 187; Moulded on
Baskets, 187; The Table, 188; The Roll, 189; To Coil
the Clay, 189.
CHAPTER XVII.
BABY ALLIGATORS AND OTHER THINGS OF CLAY 193
The Head, 195; The Body, 196; The Tail, 196; Coat of
Armor, 197; The Legs and Feet, 198; A Banana, 201; A
Little Bust of Washington, 202.
CHAPTER XVIII.
FUNNY LITTLE APPLE TOYS 206
The Porcupine, 206; Sally Walker's Head, 208; Sally's
Curls, 208; The Indian, 209; A Comical Little Jap, 211;
An Apple Tower, 214.
CHAPTER XIX.
MARVEL PICTURES 215
Mary, 215; Her Dress, 217; Sun-Bonnet, 218; How to Draw
the Lamb, 219; How to Make the Wool Grow, 219; How to
Draw the Goose, 221; How to Feather the Goose, 223.
PART II
RECREATION
CHAPTER XX.
EGG GAMES FOR THE EASTER HOLIDAYS
LIFTING FOR PASCH EGGS 227
How to Prepare the Egg-Shells, 227; Hanging the Eggs, 228;
The Players, 228; The Lifting, 229; The Egg Dance, 230;
Placing the Eggs, 230; Dividing the Players, 230; The
Dance, 230; The Reward, 231; Easter Angling, 231;
Materials for the Game, 231; Fish-poles, 231; Eggs,
232; Rules of the Game, 234; Table Egg-Rolling, 235.
CHAPTER XXI.
MAY DAY AMUSEMENTS 237
How the May King and Queen Are Chosen, 237; Archery, 237;
The Bows, 238; Arrows, 238; Floral Target, 240; Keeping
Score, 243; May Baskets and Spring Flowers, 246; How to
Erect the Pole, 249; Dressing the May-Pole, 250; The
Balls, 252; The Game, 252.
CHAPTER XXII.
HALLOWE'EN REVELS 254
Gold Nuggets, 254; The Mine, 255; The Miners, 255; The
Apple Witch, 256; Witch's Hair, 257; Hat, 257; Broom,
258; Ghost Writing, 259; Four-Leaved Clover, 260;
Apple-seed Fortune Telling; 261; Fortune Bags, 262.
CHAPTER XXIII.
THE MAGIC CLOTH AND WHAT IT WILL DO 264
Magic in India, 264; A Jumping Frog, 264; The Hungry
Birds, 267; To make the Children Talk, 268; Moving
Faces, 269; The High Note, 270.
CHAPTER XXIV.
FINGER PLAYS FOR LITTLE FOLK 273
The Teeter, 273; Church, 275; Steeple, 275; Open Door,
276; The People, 276; The Preacher, 277; Man Chopping
Wood, 277; My Mother's Knives and Forks, 279; My
Father's Table, 280; My Sister's Looking-Glass, 280;
The Little Black Birds, 280; The Baby's Cradle, 281;
Chin Chopper Chin, 282; Build the Tower, 282; The Five
Little Pigs, 285; Little Heads for Little Fingers, 285.
CHAPTER XXV.
HOW TO ARRANGE FRESH FLOWERS 289
Selecting the Flowers, 289; A Number of Nasturtiums,
290; Do not Crowd the Flowers, 290; Green Leaves with
Flowers, 291; Color Schemes, 291; The Vases, 292;
Colorless Transparent Vases, 292; Arrangement, 293;
Flower Lifter, 294; Symmetry, 295; Wild Flowers, 295.
CHAPTER XXVI.
OPEN AIR PLAYHOUSES 298
A Florida Playhouse, 298; Palm Decorations, 298; Other
Decorations, 298; An Umbrella Playhouse, 299; A Real
Teepee, 302; An African Hut, 306; The Floral Tent, 307.
CHAPTER XXVII.
KEEPING STORE 308
The Counter, 308; The Scales, 309; Groceries, 312;
Vegetables, 312; Candy, 313; Wrapping Paper, 313;
Money, 314; Paper Pocket-Books, 314; Keeping Accounts,
316; Bars of Soap, 319; Butter Clay, 319.
CHAPTER XXVIII.
A FROLIC WITH THE ROSES 320
Beauty of the Rose, 320; Rose Petal Fleet, 321; Green
Leaf-Boats, 322; The Lake, 323; A Little Rose Girl,
325; A Garden, 325; A Peachblow Vase, 327; Candied Rose
Petals, 327; Rose Petal Cap, 328; Conventional Designs,
330; A Wreath of Roses, 332; A Rose Book, 332.
CHAPTER XXIX.
A STRAW RIDE PICNIC 333
The Season, 333; Games for the Wagon, 333; Simon Says,
335; Bird Wish, 337; Lines to Be Recited Rapidly, 337;
At the Grounds, 338; Chasing the Deer, 338; The Swing,
338; Teeter-Tarter, 338; The Dinner, 339; Dishes, 339;
Camp-Fire, 342; After Luncheon, 342; Telling Stories,
343; Game of Menagerie, 343.
CHAPTER XXX.
A PAPER CHASE 345
The Hares and Hounds, 345; The Start, 347; False
Scents, 347; The Finish, 348; How to Dress, 348.
PART I
HANDICRAFT
[Illustration: The spinning-wheel shall buzz and whirr.]
CHAPTER I
SPINNING
THERE is so much poetry, romance, and history associated with the
distaff and spindle, and later with the old spinning-wheel, that we have
looked upon them with a feeling almost of awe, certainly with a
reverence for the gentle hands that spun so industriously generations
ago. But it has now occurred to us that we too may set the wheel
a-humming, taking up with enthusiastic eagerness the work laid down by
our great-grandmothers so many years ago. The song of even the athletic
girl will soon be like Martha's when she sings in the market-place:
"I can spin, sir,"
and the wheel will no longer be set aside as a relic of an industry past
and gone.
All the old handicrafts are coming back again, and ere long we shall be
as proud as the maids in Revolutionary times of our hand-spun and
hand-woven fabrics. To be able to spin and weave is to be accomplished
in the newest as well as the oldest of household arts.
[Illustration: Fig. 1.--The slender rod tied at the lower end.]
[Illustration: Fig. 2.--The looped upper end of the rod.]
Is the old spinning-wheel in the attic, neglected and covered with dust,
or in the parlor, decked in all its bravery of blue ribbons and snowy
flax? Bring it out, wherever it may be, and for the first time in many
years it shall buzz and whirr, while a girl's slender fingers part the
flax and a girl's light foot rests upon the treadle. Look well to
The Wheel
and see that none of its parts are missing. There must be the bench, of
course, with its treadle and wheel, then the slender rod which is tied
loosely at the lower end to the cross-piece of the treadle (Fig. 1), and
caught at the looped upper end to the little, curved-metal crank that
extends at right angles from one end of the wheel's axle (Fig. 2).
[Illustration: Fig. 3.--A little peg slipped through two holes.]
The two slanting uprights which hold the wheel in place are slotted at
the upper ends, and in these slots rests the axle. A little peg, slipped
through two holes in one of the uprights, keeps the axle from slipping
out of place (Fig. 3).
The frame that holds
The Spindle
belongs in the position shown in the illustration of the spinning-wheel.
By turning the handle that extends out from the upper end of the bench
this frame may be moved slightly forward or backward when it is
necessary to loosen or tighten the band on the wheel.
[Illustration: Fig. 4.--The leather rings.]
[Illustration: Fig. 5.--One ring in each upright.]
[Illustration: Fig. 6.--The spindle.]
In the two uprights of the spindle-frame there must be leather rings
like Fig. 4, one ring in each upright. The narrow strip extending
outward from the ring is pushed through the hole in the upright, and the
edge of the ring fitted into the little grooves just above and below one
of the holes (Fig. 5). These two leather rings hold the ends of the
spindle, which can be easily taken out and put in by bending one of the
rings backward or slightly turning one of the uprights. Fig. 6 shows the
spindle with the spool, or bobbin, and the small, double-grooved wheel.
The spindle proper is simply the metal rod and horseshoe-shaped piece of
wood with its two rows of little hooks or teeth. Besides the wheel and
spindle there must be
The Distaff
and the arm that holds it. The arm is an upright with a rod extending
out at right angles from the upper end. The lower end of the upright is
slipped into a hole at one corner of the highest part of the bench.
[Illustration: Fig. 7.--The tip of your Christmas tree for a distaff.]
[Illustration: Fig. 8.--Bring the four branches up and tie at the top.]
The distaff, which the mountaineers of Kentucky call the "rock," is a
thing you can make for yourself if your wheel happens to have lost its
own. Many are cut from the top points of pine-trees which grow like Fig.
7, and dogwood also is sometimes used. The tip of your Christmas tree
will be just the thing. Strip off the bark, bring the four branches up,
and tie at the top to the middle stem (Fig. 8). Let the lower end of the
stem extend about four inches below the branches and whittle it down to
fit in the hole in the distaff-arm.
These are all the parts of the spinning-wheel, but before you can "see
the wheels go round" every piece of metal must be
Thoroughly Cleaned
and freed from rust. Rub first with kerosene oil and then with the
finest emery paper. Be very careful in polishing the teeth that you do
not bend or break them, as it will not be easy to have them replaced. In
fact, it is difficult to replace any part of the wheel, and though it
has lasted several generations, careless handling may put it past
repair.
[Illustration: Fig. 9.--Proper size of cord for wheel band.]
When the cleaning is finished, grease with lard the parts where there is
any friction. The slots that hold the axle, the spindle-stem, and the
metal arm, where the treadle-rod rests upon it, all need lubricating.
The best
Band for the Wheel
is hand spun, but at present it is possible to obtain them only of
old-fashioned spinners who make their own bands. You can, however, make
a band of cotton cord, such as is used for cording dresses. Fig. 9 gives
the exact size. The length of cord for a wheel measuring eighteen and a
half inches in diameter is about ten feet five inches. This allows for a
lap of one inch at the joint. Sew together with silk, wrapping and
sewing until the joint is almost invisible.
[Illustration: Fig. 10.--Make a double loop.]
[Illustration: Fig. 11.--The band will cross at the bottom.]
To Adjust the Band
loop it together, making it double (Fig. 10), lift the wheel from the
sockets, and slip the band over it. Fit one part of the band into one of
the grooves of the wheel, the other part into the other groove, allowing
it to cross at the bottom (Letter B, Fig. 11). Take the spindle from its
frame and fit the bands into the groove in the end of the bobbin (Letter
C, Fig. 6) and into the first groove in the small wheel (Letter D, Fig.
6).
The Flax
may be obtained from any linen-thread factory and can be bought by the
pound or half-pound. It is graded by color, the darkest being the
cheapest and the whitest the most expensive. For practice-work the
cheapest is as good as the more expensive. When you have learned to spin
a fine, even thread you may choose the color in reference to the article
you intend to make.
[Illustration: The spinning-wheel.]
Open your hank of flax, take part of it, and spread thinly over the
distaff, wrapping it around and around. Put on several layers, each
almost as thin as a spider-web, extending it out widely and smoothly
each time.
You may think the ribbon tied on the distaff of your parlor wheel is
merely for ornament, but it is not. The bands hold the flax in place
while it is being spun, and a crisp, dainty, pretty-colored ribbon is
just as useful for the purpose as one that is old and faded, and it is
far prettier to look upon. Wrap the ribbon around the flax on the
distaff, beginning at the bottom, cross it, and tie as shown in
illustration of the spinning-wheel.
Though everything is ready, before attempting to spin,
Practice,
simply working the treadle until you can manage that part of the work
mechanically and give your whole attention to your hands.
It seems a simple thing to work the treadle, but you will find that
without previous practice you will forget to make your foot go in the
absorbing interest of getting the flax ready to run on the spindle. Curb
your impatience a little while therefore, and resolutely turn the
distaff, with its pretty load, away from you. Place one foot on the
treadle, give the large wheel a turn to the right, or away from the
spindle, and try to keep a steady, even motion with your foot. The jerks
caused by uneven pedalling will always break the thread, so you must
learn to make the wheel turn smoothly and easily, without hurry and
without stopping. Some spinners place only the toe of the foot on the
treadle, others rest on it the heel also; it matters little which
method you adopt so long as the wheel turns evenly. When you are quite
satisfied that you can keep the wheel going without giving it a thought
you may begin
To Spin.
From the lowest ends of the flax draw down several strands and twist
them with your fingers into a thread long enough to reach easily the
bobbin on the spindle. Pass the end of the thread through the hole in
the end of the spindle nearest to you (Letter A, Fig. 6), carry it
across and over the upper row of teeth and tie to the bobbin (Fig. 6).
Start your wheel going, and, forgetting the action of your foot, give
your undivided attention to drawing out the flax. Hold the strands
lightly with your left hand and with your right keep constantly pulling
them down and at the same time twisting them slightly. See illustration
on first page. All this time you must keep the flax from matting and
tangling and the twist from running up into the mass of flax on the
distaff. Only practice will make perfect in this work, though the knack
may come suddenly and you will wonder at your first clumsy attempts. The
little fluster and excitement one feels in beginning and the hurry to
get the flax into shape for the spindle is a drawback that practice will
also overcome.
When the Thread Breaks,
as it will again and again at first, thread your spindle as before, tie
the new thread to the broken end and begin once more. A better way to
mend the thread when you are really doing good work is to unwind a
little from the bobbin, thread it backward through the spindle, bring
the end up to meet the end from the distaff, and let the two lap three
or four inches; then moisten your fingers and twist the threads
together, making one thread again.
Moistening the Fingers
occasionally is a good thing while twisting, as it makes a smoother
thread. In the old days the spinner kept a cocoa-nut-shell, filled with
water, tied to the lower part of the spindle-frame, into which she
daintily dipped the tips of her fingers when necessary. A finger-bowl or
cup of water near by will answer the same purpose.
[Illustration: The little girl and the little loom.]
CHAPTER II
WEAVING ON A HOME-MADE LOOM
[Illustration]
IT is easier than sewing or knitting or crocheting, and comes so natural
to many of us that one would almost think we should know how to weave
without being taught. Why, even some of the birds do a kind of weaving
in their pretty, irregular fashion, and it was probably from the birds
and other small, wild creatures that the earliest human mothers took
their lessons in weaving, and learned to make the mats for their babies
to sleep on and baskets for carrying their food. No one knows how long
ago these first baskets and mats were woven, but in the beginning
weaving was done without looms. Afterward rude frames were tied together
and hung from the limbs of trees, then softer and more flexible material
was used and finer fabrics were woven. To this day almost the same kind
of looms are used by the Indians in our far Western country, many miles
away from the roar and clatter of machinery, and on them are woven the
wonderfully beautiful Navajo blankets for which Eastern people are
willing to pay such large sums.
If it is natural to weave, it should also be natural to make one's own
loom, and
The Pin Loom
is simple in both the making and the working, with material usually
close at hand. The necessary wood you will find at the nearest
carpenter-shop, if not in your own home, and for the rest, a paper of
strong, large-size pins, a yard of colored cord, and one ordinary
carpet-tack are all that is needed.
Make the frame for the loom of a smooth piece of soft pine-board,
fifteen inches long by nine inches wide (Fig. 12). Make the heddles of
two flat sticks, nine inches long, half an inch wide, and one-eighth of
an inch thick (Figs. 13 and 14). From another flat stick of the same
thickness, nine inches long by one inch wide, make the shuttle (Fig.
15).
[Illustration: Fig. 12.--The frame for the loom.]
[Illustration: Fig. 13.--Heddle.]
[Illustration: Fig. 14.--Heddle.]
With a pencil and ruler draw two straight lines across the board, the
first one inch and a half from the top edge, the other two inches and a
half from the bottom edge. This will make the lines just eleven inches
apart. On these lines, beginning one inch from the side edge of the
board, make a row of dots exactly one-quarter of an inch apart,
twenty-nine dots on each line, as in Fig. 12. At each corner of the
board, one inch above the upper line and one inch below the lower line,
draw a short line, and on each short line, three-quarters of an inch
from the side edge, make one dot.
[Illustration: Fig. 15.--The shuttle.]
With a small tack-hammer drive a pin in each of the twenty-nine dots on
each long line, and in each single dot on the four short lines (Fig.
12). When driving in the pins let them all slant evenly outward, the
ones on the top lines slanting toward the upper edge of the board, those
on the lower lines slanting toward the bottom edge, as in Fig. 16. Now
lay your board aside where nothing will be placed on top of it, and make
your heddles.
[Illustration: Fig. 16.--Let the pins slant outward.]
The Heddles
are for lifting the threads of the warp so that the shuttle may be
passed through. One heddle is left perfectly plain, like Fig. 13. The
other is cut in notches on one edge like Fig. 14.
[Illustration: Fig. 17.--The marked-off notches in heddle.]
Along the entire length of one of the sticks rule a line dividing it
exactly in the middle (Fig. 17). On this line, beginning three-quarters
of an inch from the end of the stick, mark off spaces one-quarter of an
inch apart, making thirty-one dots. At the upper edge of the stick mark
off the same number of spaces exactly opposite those on the line. Then
draw straight lines connecting the upper and lower dots, extending the
first and last lines entirely across the stick (Fig. 17.) At a point on
the upper edge, exactly in the middle between the first two lines,
start a slanting line and bring it down to meet the second line where it
touches the long line. Between the second and third lines draw another
slanting line to meet the first at the bottom, forming a V. Leave the
third line, and make another V at the fourth, and so go the length of
the heddle, drawing a V at every other short line. At the top between
the V's make smaller V's, as in Fig. 17. With a sharp knife cut out
these notches, bringing the large ones quite down to the middle line
(Fig. 17). On the end lines just below the middle line bore a hole with
a small gimlet or a hat-pin heated red-hot at Letter A in Fig. 17.
Indeed the notches, too, may be made with a hat-pin by laying the
red-hot end across the edge of the stick at the top of the line, and
pressing it down while rubbing it back and forth. If you are unused to
handling a knife, burning the notches will be the easier way. You can
shape and trim them off afterward with the knife.
[Illustration: The complete pin loom.]
Of the third flat stick make
The Shuttle.
Curve the corners at each end as in Fig. 15. Sharpen one end down to a
thin edge and in the other end cut an eye two inches long and
one-quarter of an inch wide (Fig. 15). Cut your yard of colored cord in
half, pass the end of one piece through one of the holes in the notched
heddle, the end of the other piece through the hole in the opposite end
of the heddle, and tie each end of the cords to one of the pins at the
four corners of the board, drawing the cords taut. This will fasten the
heddle in its place across the loom (Fig. 12).
Near the bottom of the board, directly below the last pin at the right
on the long line, drive the carpet-tack to serve as a cleat for
fastening the end of the warp. All that now remains to be done is
To Adjust the Warp,
and your loom will be ready for weaving. The threads which extend up and
down, or from the top to the bottom of the loom, are called the warp.
Soft, rather coarse knitting-cotton makes a good warp for almost
anything woven on a small loom.
[Illustration: Fig. 18.--Adjusting the warp.]
Tie the end of the warp securely to the first pin on the long line at
the upper left-hand corner of the loom (Fig. 18). Bring the string down
and around the first two pins on the lower line, up again and around the
second and third pins on the upper line, and then down and around the
third and fourth pins on the lower line. Up again, down again, crossing
two pins each time, back and forth until the last pin on the lower line
has been reached. Wrap the warp around this pin several times, and then
around the tack, tying it here so that it cannot slip. The warp must lie
flat on the board where it passes around the pins, and in stringing up
it must be drawn rather tight, though not with sufficient force to pull
the pins out of place.
[Illustration: Fig. 19.--Putting in the second heddle.]
Turn the heddle on edge, the notches up, and slip the threads of the
warp into the notches, one thread in each notch. This, you will see,
divides the warp into upper and lower threads, and forms what is called
the shed. While the threads are separated take the other heddle and darn
it in and out above the first heddle, taking up the lower threads and
bringing the heddle over the upper ones as in Fig. 19.
The Woof
is the thread which crosses the warp and usually covers it entirely. The
material to use for woof will depend upon what you are going to make.
Germantown wool is used for the woof of the miniature Navajo blanket
shown in the illustration. The warp is knitting-cotton.
[Illustration: A Miniature Navajo Blanket.]
This is
The Way to Weave a Navajo
blanket; simpler things you can easily make after this first lesson: Of
Germantown wool you will need three colors, which are the colors most
frequently used by the Indians--red (scarlet), white, and black, about
half a hank of each. Take five yards of white wool, fold one end over a
two-yard length, fold again, and push the double end through the eye of
the shuttle (Fig. 20).
[Illustration: Fig. 20.--The threaded shuttle.]
Tie the long end of the wool to the first pin at the lower left-hand
corner of the loom, on the long line, making a tight knot and pushing it
down close to the board (Fig. 21).
[Illustration: Fig. 21.--Starting the woof.]
With the notched heddle on edge push the shuttle through the shed--that
is, between the upper and lower threads of the warp. Draw it out on the
other side, then turn the heddle down, notched edge toward you, and
stand the plain heddle on edge. This will lift the lower threads of the
warp above the others and make them the upper ones. Push the shuttle
back through the shed, lay the plain heddle flat, and stand up the
notched heddle. Weaving from the left, the notched heddle always stands,
while the plain one lies flat. Weaving from the right, the plain heddle
stands, and the notched one is turned down.
Do not draw the woof tight across the warp. When you have passed the
shuttle through, leave the thread like Fig. 21, and then push it down
firmly with your finger-tips until it lies close to the pins.
A Coarse Comb
with no fine teeth is very good to use for packing the woof, and takes
the place of what is called the lay. While the woof is looped out like
Fig. 21, comb it down toward you with the comb, and it will fit in
evenly between the threads of the warp. As the woof of the Navajo
blanket must be very tightly packed, use first the comb and then your
fingers to push it down and make it compact.
Weave back and forth until all the wool in the shuttle is used. If the
end of the woof extends beyond the last thread of the warp on either
side, turn it back and weave it under and over several threads, and
start a new piece with the end just lapping the old. The ends of the
woof must never be allowed to extend beyond the warp at the sides. It is
not necessary to tie the new piece of woof; the tight packing will hold
it in place.
In this case the new woof must be of the red wool. Weave it across
twice, or once over and back, making a very narrow red stripe, then cut
it off and thread the shuttle with white. Weave the white twice across,
then change to black and weave a stripe one-quarter of an inch wide.
Above the black weave another narrow white stripe and another narrow red
one. Put a long thread of white wool in the shuttle, and weave a white
stripe one inch wide. You will have to thread the shuttle twice for
this, as too long a thread will make so large a bunch that it will be
difficult to pass it through the shed. After the white stripe weave
another black, white, and red stripe like the first, then another
inch-wide white stripe. Once more weave a black, a white, and a red
stripe. Begin with the narrow black, follow with the narrow white, and
then weave a wider red stripe, taking the thread four times across.
After the red the narrow white, and then the narrow black stripe.
This last stripe is the lower border of
The Central Pattern
of the blanket, where your weaving will become more difficult, and at
the same time more interesting.
[Illustration: Figs. 22 and 23.--Weaving the centre stripe.]
Thread the shuttle with a long piece of red wool and weave it once
across from the left, turn back and weave through five threads of the
warp, draw the shuttle out and weave back again to the edge; again weave
through the five threads, then back as shown at B in Fig. 22. Turn here
and do not take up the last thread of the warp; pass the shuttle under
three threads, turn on the next thread, and bring it back under four
threads (C, Fig. 22), once more under the three threads, turning on the
next as before, but passing back under two threads only. Turn on the
next thread (D), and pass under three. Back under two threads (E), turn
as before on the next thread under two, turn, back under two (F), turn,
under one, turn on the next, under two (G), turn, under one, turn on the
next, back under two, and unthread the shuttle, leaving the woof
hanging.
Begin with a new piece of red wool, follow the same direction, and weave
another red point on the next five threads, then a third one which will
take in the last warp-thread on the left. You will notice in the diagram
that the woof always turns twice on the same thread of warp.
When the three red points are finished fill in the spaces between with
black (Fig. 23), then continue to weave the black up into points as you
did the red, making two whole and two half black diamonds. Leave the
woof quite loose when you make a turn in weaving, and the space left
between the red and black will fill up in packing.
Take up the end of the red wool left at the top of the first red point,
and weave in the space between the half and first black diamond, then
break off. Take the next red end and fill in between the two whole
diamonds, then the next, and fill in between the whole and the last half
diamond. This will give you a pattern of black diamonds on a red ground.
Weave the last of the red woof once across, then break off and weave a
black, white, and red stripe like the one forming the lower border of
the pattern. Finish the blanket with the wide white stripes and narrow
colored ones like those first woven.
To take the work from the loom, cut the threads between the pins at the
top of the loom, and with quick but gentle jerks pull it off the lower
row of pins. Tie together the first and third loose ends of the warp
close to the edge of the blanket, then the second and fourth threads,
and so on across, then cut the ends off rather close to the knots.
The little Navajo blanket woven in this way will closely resemble the
real Indian blanket in texture, pattern, and colors.
Blankets for Dolls' Beds
may also be woven of fine white wool and finished with a pretty pink or
blue border at each end. A wash-cloth, soft and pleasant to the touch,
you can weave in half an hour with candle-wick for woof. This should not
be packed tightly, but woven with rather a loose mesh. Then there are
cunning little rag rugs to be made for the dolls' house, with colored
rags for the woof. But so many materials may be woven on your home-made
loom, that it will be a pleasure for you to discover them for yourself.
CHAPTER III
A BALL OF TWINE AND WHAT MAY BE MADE OF IT
RUN to the kitchen and ask the cook to lend you her pastry-board for a
day or two, to use as a support for holding string from which to make a
toy hammock (Fig. 24).
[Illustration: Fig. 24.--The hammock you can make.]
Drive twelve large tacks in a straight line across the top edge of the
board; place the tacks one inch and a half apart (Fig. 25), and with a
pencil draw lightly a line across the board from side to side, one inch
and a half below the tacks. This will guide you in keeping the knots
even. Be sure that the line is perfectly straight; then draw another
line one inch and a half below the first and continue making lines until
the board is covered with them, at equal distances apart and running
across from side to side. Over each tack on the top of the board hang a
piece of string about two yards long (Fig. 26). Being doubled, each
string makes two lengths of one yard each.
[Illustration: Fig. 25.--Tacks in top of board.]
[Illustration: Fig. 26.--Over each tack hang a piece of string.]
Bring the two ends of each strand down evenly together that all the
strings may hang exactly the same in length. Fig. 26 is intended only to
show how to hang the strings and gives but a section of the work.
[Illustration: Fig. 27.--With strong pins fasten the first and fourth
strings to the board.]
With strong pins fasten the first and fourth strings down tight to the
board (see B and E, Fig. 27); then tie the second and third strings
together (C, D, Fig. 27), making the knot H (Fig. 27).
To Tie the Knot,
bring the two strings C and D (Fig. 27) together; hold the upper
portions with the thumb and first finger of the left hand and the lower
parts in the right hand, bring the lower parts up above the left
hand--across and over the portion of string held in the left hand--and
turn them down a trifle, running them under the strings in the left hand
just above the thumb and first finger; pull the lower portion of the
strings through the loop out over the first finger of the left hand as
shown in Fig. 29, O. Tighten the knot with the right hand while holding
it in place on the line with the left. The secret of tying the knot
properly is to hold the two strings together and tie them exactly as one
would tie a knot in a single string.
[Illustration: Fig. 28.--When knot _H_ is secure stick pin in string
_G_.]
[Illustration: Fig. 29.--Tying the knot.]
When the first knot (H, Fig. 27) is tied, take the pin out of the string
E and stick it in the string G, according to Fig. 28. Fasten down the
knot H with another pin, and you will have the knot H and the string G
firm and tight to the board while you tie the two loose strings F and E
together, forming the knot K. Pin this down to the board and remove the
pin from the string G and place it in the string N, leaving M and G free
to be knotted together.
Continue tying the strings in this way until you have made the first row
of knots across the board, always using pins to hold the
boundary-strings securely to the board on each side of the two you are
tying. As each knot is formed, pin it to the board and allow the pins to
remain in the first row until the second row of knots has been made.
Fig. 29 shows the beginning of the third row of knots in the knot P, the
pin being taken from the first knot, H, ready to be placed in the knot
P. Form row after row of meshes by knotting the strings until the
netting comes too near the bottom of the board to work comfortably, then
slip the top loops off from the tacks and hang a portion of the net over
the top of the board, allowing a lower row of meshes to hang on the
tacks.
Fasten the last row of the knots carefully, binding with strong strings
the short loose ends of the strands securely to the string forming the
mesh each side of the knot. Remove the net from the board and make
A Fringe
of string on each side of the hammock. In Fig. 30, T shows how to place
a strand for the fringe under one side of the mesh on the edge of the
net: and S gives the manner of bringing the ends of the strand down over
the string forming the mesh and under the loop made by the centre of the
fringe-strand. Pull the two ends of the strand down evenly, and bring
the knot up close and tight to the hammock-mesh as shown in the finished
fringe in Fig. 30.
[Illustration: Fig. 30.--Making the fringe.]
When you have made the fringe, thread a separate heavy cord through the
loops on each side of the hammock (Fig. 31). Tie the loops together
(Fig. 32) and fasten together the two ends of each cord, making these
two extra last loops long enough to allow of a free swing for the little
hammock, or you can thread a cord of the same as that used in the
hammock through every loop, tying the ends of each piece together
through a brass ring, and instead of one long loop a number will support
the hammock.
[Illustration: Fig. 31.--Heavy cord through loops on end of hammock.]
[Illustration: Fig. 32.--Tie loops together.]
[Illustration: Making a sash-curtain for her room.]
[Illustration: Fig. 33--Your school-bag made of string.]
Fig. 33 shows a strong, serviceable little
School-Bag
which is easier to make than the hammock. Take a piece of heavy cord
twenty inches long, lap one end to the distance of an inch over the
other and sew the two lapped ends firmly together; then bind them neatly
around and around with string. Bring the two edges or sides of the
circle together, forming two ends (V V, Fig. 34). Tie a strong string
on each end (Fig. 34) and fasten each of the strings to the back of a
chair; you will then have a circle of heavy cord securely suspended in
mid-air. Cut twenty-four lengths of twine, each twenty-five inches long;
double each piece and fasten all the strands on the circle of heavy cord
in the same way you made the fringe on the hammock (X X, Fig. 34),
except that this time the strands must be quite a distance apart. Let
all the spaces between the strands be equal. Having fastened the lengths
of twine on the circle, net them together exactly as you netted the
hammock, but you must depend upon your eye to keep the meshes even and
of the same size, as there will be no board with lines to guide you
(Fig. 34). Tie the knots in circular rows, going around on both sides of
the circle for each row. Continue the meshes until within three and a
half inches of the bottom, then tie the two sides together, closing the
bottom of the bag and forming the fringe shown in Fig. 33.
Having finished the bag, untie the strings attached to the two ends and
make two handles of heavy cord or slender rope. Fasten the handles on
their respective sides of the bag. Loop the ends of the handles under
the cord forming the top of the bag, and bring each end up against its
own side of the handle. Sew each of the two ends of the two handles
securely to the handle proper; then bind the sewed portions neatly
together with fine cord as in Fig. 33.
[Illustration: Fig. 34--Making the school-bag.]
With some firm straws and more string we will make
A Sash-Curtain
for the window of your own room, as the little girl is doing in the
illustration. Loop about thirty strands on the same number of tacks, in
the manner in which you hung those for the hammock (Fig. 26). Make one
row of knots, and before forming the next row slide a piece of straw one
inch long over the two strings which are to be knotted together; the
ends of the string must be moistened and brought together in a point in
order that they may more easily be threaded through the straw. The
letter R in Fig. 35 shows the straw with the ends of the string run
through it, and U gives a straw higher up on the strings. After each
straw is put into place, knot the strings immediately underneath to
prevent the straw from sliding out of position.
Fig. 35 shows how to manage the work. It is almost exactly like that of
the hammock, the only difference being the threading on of the straws
which hold the strings in place without a knot at the top (see W in Fig.
35). Let the bottom of the net end in a fringe. Take the loops off from
the tacks when the curtain is finished, and slide them on a straight,
slender stick, which you can fasten to the window by resting the ends of
the stick through loops of tape tacked on the sides of the window-frame
at the right distance up from the ledge of the window.
[Illustration: Fig. 35.--Sliding straws on strings for curtain.]
If possible, let all the net-work be made of pliable, soft material; it
is easier to handle, and the results are much prettier.
Make the curtains of any color you may fancy.
CHAPTER IV
AN ARMFUL OF SHAVINGS AND WHAT TO DO WITH THEM
DO you love to go into a carpenter-shop, with its sweet-smelling woods
and fascinating tangle of white and rose-tinted shavings, and to watch
the carpenter guide his plane along the edge of a board, shaving off so
evenly and smoothly the long curls which look almost as natural as the
ringlets of a little girl? I am sure that many times you have tucked the
ends of the shavings under your hat and scampered off with the curls
streaming out behind or bobbing up and down delightfully at the sides.
It is great fun, yet there is still more entertainment to be found in
these pretty shavings.
Gather an armful, then, choosing the most perfect ones, not too thin,
with firm, smooth edges, and you shall weave them into
A Pretty, Soft Little Basket
like the illustration.
[Illustration: The soft little basket made of shavings.]
[Illustration: Fig. 36--Directly across the centre draw a straight
line.]
[Illustration: Fig. 37--So that the upper edge of B will touch the
dividing line of A.]
Pine-shavings are the best to use, as they are less brittle than those
of harder woods. Select a number and put them to soak in cold water to
make them soft and pliable. Then, lifting out those of an even width,
place them before you on a lap-board or table, and after passing them
between your fingers several times to take the curl out, cut eight
pieces eleven inches long. Directly across the centre of two of the
strips draw a straight line, as in Fig. 36. Place one of these strips,
A, flat on the table and lay the other, B, across it so that the upper
edge of B will touch the dividing line of A and the mark on B will be on
a line with right-hand edge of A, Fig. 37. Under A slide another strip,
C, Fig. 38. Over B and under C slide the strip D, Fig. 39. Over D and
under A pass the strip E, Fig. 40. Under E, over B and under C weave the
strip F, Fig. 41. Under E, over B, and under C weave the strip G, Fig.
42. Over F, under D, over A, and under G weave the strip H, Fig. 43.
This forms a square for the bottom of the basket.
[Illustration: Fig. 38.--Under A slide the strip C.]
[Illustration: Fig. 39.--Over B and under C slip the strip D.]
[Illustration: Fig. 40.--Over D and under A pass E.]
[Illustration: Fig. 41.--Under E, over B and under C weave F.]
Bend up the ends and
Weave the Sides
with longer, narrower shavings which you can make by cutting lengthwise
through the middle of several wide shavings.
[Illustration: Fig. 42.--Under E, over B and under C weave G.]
[Illustration: Fig. 43.--This forms the bottom of the basket.]
If you find any difficulty in keeping in place the part you have woven,
pin it to the board or table with several pins, as in Fig. 44. Bring the
sides up close to the edges of the bottom, then start your weaver at D,
on the inside of the basket (Fig. 44).
[Illustration: Fig. 44.--Bend up the ends now and weave the sides.]
Weave all the way around, turning the corners sharply, until the weaver
meets the first end; lap it over this, cut it off and tuck the last end
under H. Start the next weaver at C, weave it around and tuck under E.
Weave five weavers around the sides of the basket, beginning each time
in a new place that the joints may not all come together, then bend the
upright shavings over the edge of the top weaver, tucking the ends of
each under the third weaver, one inside, the next outside, as they may
come inside or outside the basket (Fig. 45).
[Illustration: Fig. 45--Bend the upright shavings over the top edge.]
Bind the Edge
with two binders the width of the side weavers. Hold one inside, one
outside, and whip them on over and over, taking the stitches with a
narrow strip of shaving as shown in Fig. 46.
[Illustration: Fig. 46.--Bind the edge with two binders.]
Cut two strips the width of your side weavers for
The Handle,
making one twelve inches and the other eleven inches long. One inch from
each end cut notches, as in Fig. 47. Slide the end of the short strip
under the second weaver on one side of the basket and pull it up until
the points catch on the weaver, then tuck the end under the lower weaver
(see illustrations).
[Illustration: Fig. 47.--Notch the ends like this.]
Loop the handle diagonally over the basket and fasten the other end on
the second weaver on the side. Secure the ends of the long strip on the
third weaver, allowing it to cross the other side of the handle at the
top, then bind the two pieces together at the middle by wrapping with a
shaving of the same width over and over. Split this wrapper at the last
end and tuck the two ends in at the sides. Fig. 48 shows the under part
of the handle with one end of the wrapper tucked in.
[Illustration: Fig. 48.--Tuck the two ends in at the sides.]
You can make table-mats, charming little handkerchief-cases, and a
number of other things of the dainty shavings, all on the same principle
as that of the basket.
[Illustration: The handkerchief case.]
To make
The Handkerchief-Case,
weave a square, measuring eight inches, of the narrow shavings, just as
you did for the bottom of the basket. These shavings must be twelve
inches long and you will probably need about thirty-two pieces. When the
square is finished tuck in the ends, as around the edge of the basket,
then bend in three of the corners to meet at the middle and catch with
needle and thread. Sew a quarter of a yard of bright ribbon where the
corners join and another quarter of a yard on the loose corner. (See
illustration.) Put your handkerchiefs in the little pocket, bring up the
loose point, and tie the ribbon in a pretty bow.
CHAPTER V
PRIMITIVE REED CURTAINS
THESE pretty rustic hangings can be made very easily and quickly. They
are light in weight and the general tone of coloring, when the reeds
have been carefully dried at home, is a pleasing soft gray green, with
suggestions here and there of gray browns, reds, and yellows. The
curtains may be either of these reeds or fresh green cat-tails, and even
of the silvered gray stalks left standing from last season. The cost in
actual outlay of money for several curtains need be only a few cents for
cord, staple-tacks or nails, and screw-eyes, but, like the early savage
whose method of work you are imitating, you must collect the
Raw Material
out in the open. So away to the spot where the finest cat-tails grow,
gather a lot of them, cutting the stalks off clean and smooth at the
base, that the cat-tails may not be bent or split, for as reeds in your
curtain they must be as near perfect as possible. Cut the velvety brown
head off from each one, making all of the stalks the same in length;
then, with several long leaves twisted together for string, tie the
stalks into a bundle and march home with the treasure.
[Illustration: Fig. 49.--Beginning a primitive curtain.]
[Illustration: Fig. 50.--Centre of twine tied on long stick.]
An old bamboo fishing-rod, a length of handle from a long-handled
dusting or window brush, or any kind of a long, slender, smooth, round
stick will do for the top curtain-pole from which to hang the reeds. Lay
the pole across a table in front of and parallel to you; then tie the
centres of four pieces of cord of even lengths on it at equal distances
from each other (Fig. 49). Detail of the work is given in Fig. 50. Place
a cat-tail reed up against the four ties, allowing one string from each
tie to come over and the other under the cat-tail (Fig. 51). Cross the
two lengths of each cord over the last cat-tail, bringing the lower
string up and the upper string down (Fig. 52); then lay another reed up
against the crossed strings, carrying the strings in turn over this reed
(Fig. 53). Again bring the lower strings up and the upper down before
placing in another cat-tail, and always alternate the large and small
ends of the reeds as in Fig. 54, in order to have them equally balanced
and to avoid bringing all the small ends on one side and the large ones
on the other side of the curtain.
[Illustration: Fig. 51.--Allow one string to come over and the other
under the cat-tail.]
[Illustration: Fig. 52.--Cross the two lengths of twine.]
[Illustration: Fig. 53.--Lay another cat-tail up against the crossed
strings.]
[Illustration: Fig. 54.--Alternate large and small ends of reeds.]
[Illustration: Fig. 55--Primitive curtain of reeds and twine stitch.]
[Illustration: Fig. 56.--Staple nail in top pole of curtain.]
[Illustration: Fig. 57.--Cord fastened on top pole for rolling up
curtain.]
Continue Crossing the Cord
and adding cat-tails until the curtain is of the desired length. Tie the
ends of the string on each line securely together and tuck them under
the weave, hiding the ends on the wrong side of the curtain (Fig. 55).
At equal short distances from the tips of the head-pole fasten in a
screw-eye large enough to pass readily over the two hooks immediately
above the window where the curtain is to hang (Fig. 55, A, A). On the
centre of the space along the upper side of the top pole, between the
first and second cord and the third and fourth cord, drive in a
staple-nail (Fig. 49, B, B), shown more plainly in Fig. 56. These
staple-nails are for holding in place the long cord used in rolling up
the curtain (Fig. 57, B, B, and Fig. 58, B, B). Thread one end of a
long piece of cord from the back of the curtain through one staple-nail
and the other end through the other staple-nail. Bring both ends of the
cord down over the front of the curtain around the bottom and up over
the back; then tie the ends on the pole (Fig. 57, C, C). Dotted lines
show how the cord runs along the back of the curtain. Have the cord
sufficiently long to allow of the stretch between the two staple-nails B
and B (Figs. 57 and 58), to hang down over the back and extend in a
loop below the bottom edge of the curtain (Fig. 57, D). When you wish to
raise the curtain, pull the bottom loop and up will go the curtain (Fig.
58). These primitive hangings are just the thing for outing cottages on
the sea-shore or log-houses in the mountains. You can have fun weaving
them while at your summer home and in place of the old-fashioned
quilting-bee you might give a
Curtain-Bee Frolic.
The girls and boys could readily make a number of hangings in one
afternoon, and while weaving the reeds together they would weave into
the work all sorts of bright speeches and gay laughter, so that ever
after the curtains would be filled with delightful associations of the
charming summer afternoon. Reed curtains can be fashioned in any width.
If very narrow hangings are in demand, cut your reeds to measure the
length needed for the curtain-width and weave them together with the
same twine cross-weave used in Fig. 55.
[Illustration: Fig. 58.--Cat-tail curtain raised by loop from bottom.]
[Illustration: Fig. 59.--Small end of one cat-tail.]
[Illustration: Fig. 60.--Large end of another.]
[Illustration: Fig. 61.--Wide curtain, each reed of two cat-tails
joined.]
Doorway-Screens
hung on a swinging, armlike rod extending, when open, at right angles
with the doorway, and easily moved forward or backward, are attractive
when of woven reeds, especially if dull, green-colored cord is used in
the manufacture in place of ordinary twine. For very wide out-of-door
veranda-shades, select the strongest cat-tails and dig out about two
inches of pith from the large end of one cat-tail very cautiously to
avoid breaking the sides; then push the small end of another cat-tail
into the opening (Figs. 59, 60, 61); weave these long pieces together as
you wove the single reeds in the first curtain, using extra lines of
weave. If you cannot obtain cat-tails, take other reeds; or cut some
straight, slender poles from shrubs or trees, and weave them into
curtains with colored cord of reds or browns. Such pole-hangings would
be excellent for the open front of your mountain shack or lean-to, and
they could do service in screening the sunlight, when too strong, from
the central open way of your saddle-bag log-house.
[Illustration: Sitting in the orchard]
CHAPTER VI
THINGS TO MAKE OF COMMON GRASSES
A Grasshopper-House
"MAMMY, make me a grasshopper-house."
"Go 'long, chile, I done got 'nough to do 'thout makin' no
hoppergrass-houses."
"Please, mammy, only one, and then I can make them for myself. I'll
watch you just as close. Won't you, mammy?"
"Pick me some grasses, then; I 'low I has to, but don't yo' come
pesterin' me no more after this time.
"Seed-top grasses, honey, seed-top grasses; don't git me none of them
blade kind. Ketch hol' near the top and pull 'em up slow like, then
they'll come out nice and smooth, an' leave they ole rough skins behind,
just like a eel does when you skins him. That's it, you got 'nough now;
bring 'em 'long here an' we'll make the hoppergrass-house.
"Hol' your own hand, honey, you'll learn best that-a-way. Can't forgit
the feelin' of it once you build it on yo' fingers.
[Illustration: Fig. 62.--Put the grass around your middle finger with
the end inside.]
[Illustration: Fig. 63.--Lay the next grass across the first.]
[Illustration: Fig. 64.--Bend back the ends of the first grass.]
[Illustration: Fig. 65.--Put the next grass across your hand.]
"Take one piece o' grass an' put it round yo' middle finger with the
ends inside like this (Fig. 62). Now lay the next piece right across the
first (Fig. 63), an' bend back the ends of the first grass over the
tother an' tuck 'em 'tween yo' fingers just like that (Fig. 64). Put the
next grass across yo' hand (Fig. 65), an' take up the second grass-ends,
bendin' 'em back to keep company with first grass-ends. That makes
another bar (Fig. 66). Now yo' do it an' let mammy see how yo' git
along. That's right, lay the grass across an' put the under ends back
ev'ry time. How many bars has yo' got now? Six? That's 'nough fo' any
hoppergrass, an' is as many as yo' little hand can hol' anyway.
"Now slip it offen yo' fingers, bring the ends together an' tie with a
blade o' grass just above these here blossom ends (see illustration).
There now, yo' done made a hoppergrass-house, an' don' yo' come askin'
yo' ole mammy to stop her work no more."
[Illustration: Fig. 66.--Bend back the second grass ends like the
first.]
[Illustration: Fig. 67.--Tie them together at the root ends.]
[Illustration: Fig. 68.--Lift two of the grasses and tie them
together.]
That is the way the little girls and boys in the South are taught to
make the grasshopper-houses, by the old colored "mammies." They are
funny little cages, and, of course, will not hold a grasshopper or any
other insect, but we like to imagine they will.
There are other things to make of grasses, any one of them requiring
only a few moments' work, and it is a pretty, quiet occupation for
restless little fingers. Sitting in the orchard, nestling like little
partridges amid the tall grasses, all your materials are close at hand.
Reach out and gather some of the long-bladed grass, and we will make
A Doll's Hammock
Some of this grass measures twenty-five inches in length. It does not
grow on stalks, but the blade appears to spring directly from the root,
and it is smooth and pliable. You may find orchard-grass almost any
where, generally in neglected corners and close to fences where the
scythe does not reach.
[Illustration: Fig. 69.--Tie them all in pairs.]
[Illustration: The grasshopper-house.]
Take eight or ten of the blades of this grass and tie them together at
the root-ends as in Fig. 67, drawing the knot tight as in Fig. 68. Stick
a pin through just below the knot and fasten to your knee; then lift two
of the grasses at the right-hand side, and tie them together about one
inch below the pin (Fig. 68). Tie the next two grasses together in the
same manner, the next, and the next, until you have tied them all in
pairs (Fig. 69). Make the second row by separating the pairs of the
first and tying one grass of one pair to the neighboring grass of the
next pair, making the knots one inch below the first row. This leaves
the first and last grasses hanging loose (Fig. 70). On the third row the
first and last grasses are tied in once more (Fig. 70). On the fourth
they are left again, and so they alternate until the hammock is
finished. Keep the rows of knots at even distances apart, and make the
hammock as long as the length of the grass will allow. Leave about three
inches of the grass below the last row of knots, and then tie the ends
together as in the illustration. Swing the little hammock between the
low-hanging branches of a tree; put your dolly in it and let the summer
breezes rock her to sleep while you sing:
Rock-a-by baby in the tree-top.
[Illustration: Fig. 70.--Make the knots of the second row one inch below
the first row.]
[Illustration: The grass hammock.]
A very pretty
Bouquet-Holder
can be made of seed-grasses and one long blade of grass. In this you may
carry the most delicate wild flowers and ferns without wilting them by
the warmth of your hand.
[Illustration: Bouquet-holder made of seed-grass.]
[Illustration: Fig. 71.--Bunch together the seed-grass stalks.]
Bunch together seven fine, strong seed-grass stalks and tie just below
the blossoms, with the root-end of your long-blade grass (Fig. 71). The
stems of the seed-grasses are the spokes, the long grass the weaver.
Turn the blossom-ends down, the stem-ends up, and close to where it is
tied, begin to weave the long grass in and out, under one spoke, over
the next, under the third, over the fourth, going around and around
spirally until the end of the weaver is reached, then tie it to one of
the spokes. Keep forcing the spokes farther and farther apart as you
weave until the holder is shaped like a cone. As you see in the
illustration, the weaver never passes over one of the spokes twice in
succession. In one row it goes over a spoke, in the next row under it,
in the third over again, and so on. In order that it may always come
this way you must have an uneven number of spokes. Four will not do, nor
six, nor eight, but five, seven, or nine spokes will bring the weave out
all right.
A Grass Napkin-Ring
is another thing that can be made by weaving or braiding the grasses.
[Illustration: Grass napkin-ring.]
[Illustration: Fig. 72.--Take one blade from each bunch and cross them.]
[Illustration: Fig. 73.--Bring C over A and D under B and over C.]
Select ten fine long blades of grass, divide them into two bunches of
five each, put the root-ends together, and tie them as when making the
hammock. Pin these two bunches to your knee about two inches apart, and
taking one blade from each bunch, cross them as in Fig. 72, the
right-hand grass A on top of the left-hand grass B. Now bring the
left-hand grass C over A, and the right-hand grass D under B and over C
(Fig. 73). Next weave the left-hand grass E under A and over D, then the
right-hand grass F over B, under C, and over E. Weave the remaining four
grasses in the same way, taking first from one side, then from the
other. When your work has reached the stage shown in Fig. 74, take the
grass A, turn it _under_ and weave it in and out as in Fig. 76, then the
grass B, turn it _over_ and weave until it crosses A (Fig. 76). D comes
next, to be woven until it crosses B, then C, which will cross D. On the
left hand always turn the grasses under before beginning to weave, on
the right hand turn them over before beginning to weave.
[Illustration: Fig. 74--Weave the remaining grasses in the same way.]
[Illustration: Fig. 76.--Turn the grass A under, and weave it in and
out.]
When You Have Woven
or braided a strip about five inches long, untie the two knots at the
top, form the braid into a ring and tie the opposite ends together in
two knots. The groups G and G in Fig. 77 form one knot, the groups H and
H the other knot. Trim the ends off neatly and the napkin-ring will look
like the one in the illustration.
Do not use rough or saw-edged grasses for any of this work, for they
sometimes cut the hands, and the seed-top grasses must not be old enough
to shed their seeds into your eyes. When dry most grass is quite brittle
and will break if you attempt to bend it. The fresh, green, soft and
pliable grasses are the kind you need and these you may always find in
season.
[Illustration: Fig. 77.--Tie the opposite ends together.]
CHAPTER VII
THE POSSIBILITIES OF A CLOTHES-LINE
YOU can form it into graceful patterns of curves and coils, loops and
rings; you can weave it basket-fashion or net it together with brass
curtain-rings, and you can fray it out into soft, pretty tassels. You
can make it into a decorative wood-basket, a grille for an open doorway,
fringe for curtains and portières, or decoration for the top of a wooden
chest. One use will suggest another and you will probably find some way
of adapting the rope that has never yet been thought of.
Hemp rope and cotton, large rope and small, down to the ordinary heavy
twine, all lend themselves to this work.
It requires a rather heavy clothes-line, one considerably lighter,
called by some rope-cord, and a piece of strong twine for the
Wood-Basket
shown in the illustration.
Make the bottom of a board two feet long and sixteen inches wide, and on
each end of the board nail securely one-half of a barrel-hoop (Fig. 78).
From an old broom-stick cut four rounds one inch thick for the feet
(Fig. 79), and fasten one round to each corner underneath the board with
strong screws or wire nails (Fig. 78, Z Z). This is all the wood you
will need for the basket, the rest is to be made entirely of rope.
[Illustration: The wood-basket.]
[Illustration: Fig. 78--On each end nail one-half of a barrel-hoop.]
[Illustration: Fig. 79--For the feet.]
Take your small rope and nail one end of it to the edge of the bottom,
close to one end of one of the barrel-hoops (Fig. 80), then wrap the
hoop with the rope, one row close to another until it is completely
covered. Cut off the rope when it reaches the end of the hoop and nail
it down as you did the first end of the rope in beginning. Fasten a
piece of the heavy rope entirely around the edge of the board, nailing
it at intervals along each side, but leaving loose that at the end edges
until later. Make the
End Pieces
of the basket by looping and twisting the heavy rope into the pattern
shown in Fig. 81, forming as many loops as are required to reach across
the end of the bottom. Wrap and tie one row of the loops to the rope on
the end edge of the board and the side loops to the hoops, using the
twine for this purpose.
[Illustration: Fig. 80.--Nail one end of the small rope to the edge of
the bottom.]
Eight inches from the end of the bottom, underneath but near the side
edge, nail one end of your heavy rope; bring it up slantingly and wrap
and tie it to the hoop just above and touching the top edge of the
loops, stretch the rope tightly across the hoop and tie at the other
side, then carry the end down and fasten underneath the bottom eight
inches from the end of the board (see illustration). Wrap and tie the
top loops of the end piece to the top rope as shown in illustration.
Finish the other end of the basket in the same manner, not forgetting to
nail in place the rope left loose at the end edges. Give the completed
wood-basket several coats of dark varnish. The varnish not only produces
a nice finish, smoothing down both wood and rope, but also stiffens and
helps to hold the rope in place.
[Illustration: Fig. 81.--Make the end pieces like this.]
A Rope Netting
at once simple and effective is made like Fig. 82.
This netting may be made of heavy rope for a grille in an open doorway,
or of lighter rope for fringe. In either case the method is the same.
[Illustration: Fig. 82.--A Rope netting.]
In a board, at regular distances apart, along a straight line, drive a
row of wire nails. It depends upon the size of the rope how far apart
the nails should be placed. For a heavy rope there must be at least four
inches between, and this distance should lessen as the rope decreases in
size.
Cut your rope into pieces four feet in length if it is heavy, not so
long if it is light rope. Loop one piece of rope over each nail and let
it hang down evenly, then bring the first and fourth strands together
and slip on them a small brass curtain or embroidery ring (Letter A,
Fig. 83). Push the ring up to within four inches of the line of nails if
the nails are four inches apart. If the distance between the nails is
three inches the ring must be three inches below the line. Catch the
ring to each strand of rope with needle and thread to hold it in place.
Bring the third and sixth strands together and slip on a ring (Letter B,
Fig. 83). Then the fifth and seventh, and so across the board.
[Illustration: Fig. 83.--Slip on a small brass curtain ring.]
Begin the next row by slipping a ring on the first and second strands,
placing it the same distance below the first row of rings that the first
row of rings is below the line of nails (Letter C, Fig. 83). Bring the
third and fourth strands together with a ring, the fifth and sixth,
continuing the original pairing of the strands until the row is
complete. The third row of rings brings together again the second and
fourth strands, the third and sixth, as in the first row, and the fourth
row of rings goes back to pairing the first and second, third and fourth
strands.
The Tassels
Below the last row of rings wrap and tie the strands together, then
untwist the ends of the rope up to where it is tied and fray it out
until it becomes fluffy. Make the head of the tassel by wrapping closely
with twine a short distance below the ring, or you may slip on several
of the brass rings as a finish.
The board on which you make your netting need not be any longer than is
convenient to handle, for when one part of the netting is finished it
can be taken off the nails and new strands added to carry on the work.
Fig. 84 is an ornamental design suitable for decorating a wooden chest
or, if sewed on cloth, for a hanging. By studying the design you can
easily reproduce it without the aid of description or other diagram.
[Illustration: Fig. 84.--Ornamental design.]
CHAPTER VIII
HOW TO WEAVE A SPLINT BASKET
YOUR enthusiasm will begin when you find how easily the splint can be
cut and shaped after it has soaked for a while in water. It is
delightful to work with, almost as soft and pliable as ribbon, while
having more substance. Although there is apparently such diversity in
the material shown in the illustration, it all comes from one roll of
splint, which is uniform in width and thickness.
[Illustration: Weaving the sides of basket with long weaver.]
A basket measuring about six inches in diameter and three inches in
height is a convenient size on which to learn.
Open Your Roll of Splint,
put two pieces to soak in a bowlful of cold water, and let them remain
twenty minutes. Have ready a clean lap-board, a pair of large scissors,
and an old towel. The lap-board not only serves for a work-table, but
also keeps the water out of your lap.
Wipe the dripping water from the splint, and cut off six pieces nineteen
inches long; then cut these into sixteen strips one-half inch wide, for
the spokes of the basket. Do not attempt to tear the splint, for it will
not tear evenly. From the other piece of splint cut four strips for
weavers, making the first one-half of an inch wide, the next one-fourth
of an inch wide, another one-eighth of an inch wide, and the last
one-sixteenth of an inch wide. Place all the weavers in the water and
leave them until you are ready to begin weaving.
Take Up the Spokes,
one at a time, and pass them between your fingers until they are
perfectly straight and flat; then number them all by writing the number
with a pencil on each end of every spoke; see diagram (Fig. 85). Lay the
spokes in front of you on the lap-board crossing the first four at the
centre (Fig. 85). Place the next four spokes in the spaces between the
ones you have just arranged in the order shown in Fig. 86, then the
remaining eight in the spaces left between these.
[Illustration: Fig. 85.--The first four spokes.]
For instance, the ninth spoke should come between No. 1 and No. 5, the
tenth spoke between No. 5 and No. 3, the eleventh spoke between No. 3
and No. 6, and so on around the circle (Fig. 87). Be sure the lower end
of a spoke fits between the same numbers as the upper end. When all the
spokes are placed hammer a strong pin directly through the centre where
they are crossed, to hold them together while you begin.
[Illustration: Bottom of basket completed.]
[Illustration: Material for weaving basket.]
[Illustration: Small basket with two rows of trimming on different
colored weaver between.]
[Illustration: Lining the basket.]
The Weaving
With the spokes lying in the position shown in diagram (Fig. 87), take
the eighth-inch weaver, and begin to weave it in and out of the spokes.
Start it under spoke No. 1 about two and one-half inches from the
centre, bring it over No. 9, under No. 5, over No. 10, under No. 3,
over, under, over, under, until it has crossed spoke No. 16; then skip
No. 1, bring the weaver under No. 9, and weave another row. You will
find it necessary to skip one spoke at the beginning of each row, in
order to make a continuous under-and-over weave. Weave five rows with
the eighth-inch weaver, then slide the end under the last row, lapping
it an inch or so and running it under several spokes, to hide the joint.
Slip the first end under a spoke also. During this part of the work your
main endeavor must be to weave in a perfect circle. The illustration
shows the bottom of the basket completed.
[Illustration: Fig. 86.--Eight spokes in place.]
Before bending the spokes for the sides of the basket, let them soak
in the water a few minutes, then place the work on the lap-board, the
same side up as when started, and carefully bend the spokes up at
right-angles with the bottom (Fig. 88). Start a half-inch weaver inside
the basket, close to the bottom, and weave under and over until the row
is complete; then, allowing for a lap of about three inches, cut the
weaver off and slide the end under the first end of the weaver, making
the invisible joint by tucking each end under a spoke. Start the next
row a little beyond the joint of the first row, that the joining may not
all come in one place. Weave five rows of the half-inch weaver, then two
rows of the fourth-inch weaver and then bind off (Fig. 89).
[Illustration: Fig. 87.--All of the spokes in place.]
[Illustration: Fig. 88.--Bend the spokes up.]
Binding Off
Cut the spokes off evenly, leaving about two inches extending above the
top of the basket, then put the basket in the water, spokes down, and
soak until pliable. Bend each spoke down snugly over the top weaver, and
slip the end through the next weaver, pushing it down until its end is
hidden under one of the weavers. Bend one spoke inside, the next outside
the basket, according as they come inside or outside of the top weaver
(Fig. 89).
[Illustration: Fig. 89.--Binding off.]
This binding off holds the top weaver in place and makes the basket very
firm; but the spokes must be protected from wear where they are bent,
and it is necessary to put a double band around the edge. For this band
cut two pieces of the fourth-inch weaver which will go around the basket
and lap about an inch. Place one piece along the inside edge, the other
along the outside edge of the basket, and with the sixteenth-inch weaver
bind them to the top weaver, as shown in Diagram 90. Fasten the end by
taking several cross-stitches with the narrow weaver, passing it under
the inside band only, and tucking the end under the same band.
[Illustration: Fig. 90.--Putting on the band.]
The Trimming
Many splint baskets are trimmed with twisted loops of the same material.
For this trimming take one of the half-inch weavers and cut a thread's
width off its edge, making it just a trifle narrower than the other
weaver. Insert the end of this weaver under a spoke at the top of the
basket (letter A, Diagram 91), give a twist to the left, and pass it
beneath the next spoke, as shown in Diagram 91, letter B. Pull the loop
down and flatten it a little with your thumb, then twist the weaver
again, this time to the right, and slip the end under the next spoke,
letter C. Continue this around the basket, and make the joint of the
trimming as you did the other joints, by lapping the ends and slipping
them under the spokes, which makes the last loop of double thickness.
[Illustration: Fig. 91.--Making the trimming.]
The small basket shown in the illustration has two rows of trimming, and
between them is run a weaver of another color pulled out into loops at
the sides.
The illustration on the first page of this chapter shows a large basket
with four rows of trimming and handles. The handles are made of the
fourth-inch weaver, which is brought around twice, making a ring of
double thickness. The ring is then wrapped with the eighth-inch weaver,
and fastened to the basket with loops of the same. The weaving of this
large basket differs from the smaller one, in that the weaver is not cut
at the end of each row, but is continued around row after row. For a
large basket the half-inch weaver can be used in this way, but in a
small basket the slant of the weaver as it runs around is too apparent.
If a long weaver is used in a small basket it must not be more than
one-eighth of an inch in width.
While baskets of the natural white splint are extremely dainty, color
certainly gives variety and adds interest to the work, and the splints
will take dye readily. You might also line your basket with silk of a
color to harmonize with the splint.
The white-ash splint one and one-half inches wide comes in rolls of
twenty-five yards, and a roll will make several medium-sized baskets.
The material may be obtained of almost any kindergarten supply firm.
CHAPTER IX
MODELLING IN TISSUE-PAPER
A FEW cents will be sufficient to buy enough tissue-paper to model
good-sized elephants, too large to stuff into the Christmas stocking,
for they measure six or seven inches in length and stand four or five
inches high; and you can make chickens nearly life-size, and the queer
little turkeys, too.
You must select paper of the necessary color, and fold, roll, fold,
squeeze, fold, tie, with here a little pull and there a little pat, a
spreading out, a pinching in; that is all. There is no sewing, no
pasting, no pinning, merely modelling and tying, using only tissue-paper
and string.
These animals are very substantial and unique. They are not at all thin
or flat, but well rounded out and lifelike, with character and
independence enough to stand alone--just the kind your little brother
and sister will be delighted with, for they may play with the toys free
from all danger of hurts or bruises. To
Make the Chicken
select a sheet of tissue-paper of a soft yellow color, cut it through
the centre, fold into two pieces. Take one of the halves and gather up
the long edge where it has been cut (Fig. 92), then gather the opposite
edge (Fig. 93). Crease the paper as it is folded by holding one end with
the right hand (Fig. 92), and drawing the paper several times through
the partially closed left hand. This will cause it to retain the
creases, as seen in Fig. 93.
[Illustration: Fig. 92.--The beginning of the paper chicken.]
[Illustration: Fig. 93--Second step in modelling chicken.]
[Illustration: Fig. 94.--Third step in modelling chicken.]
[Illustration: Fig. 95.--Fourth step in modelling chicken.]
[Illustration: Fig. 96.--Fifth step in modelling chicken.]
[Illustration: Fig. 97.--Head and body of chicken.]
[Illustration: Fig. 98.--Modelling the chicken's legs.]
Roll a separate piece of paper into a little wad and lay it on the
creased strip (Fig. 93) about one-fourth of the distance from one end.
Bend the short end of the strip over the wad of paper, as in Fig. 94;
then fold up the strip where the end of the short fold lies, bend this
over the first fold (Fig. 95) and bring the loose end on the bottom of
the three layers. Fig. 96 shows a wad of paper inserted at one end of a
strip of creased paper folded over and over three times, making four
layers, two on top and two on the bottom of the paper wad. Wind a string
around the paper tight up to the wad and tie it securely to form the
head (Fig. 97). You now have the body and head of the chicken. Make the
legs and feet of a strip of paper about sixteen inches long and seven
and one-half wide. Gather up the two long sides with your fingers as you
did the paper in Fig. 93; crease the paper, then wind each leg with
string, leaving one inch free at each end to form the feet (Fig. 98).
Lift up the free end of the folded paper (Fig. 97) and place the centre
of the legs (Fig. 98) midway under the last fold as in Fig. 99. Tie the
end of the loose layer of the body securely on the body, and you will
have the foundation ready for the beak, wings, and tail (Fig. 100).
[Illustration: Fig. 99.--Modelling body and legs of chicken.]
[Illustration: Fig. 100.--Partially modelled ready for beak, wings and
tail.]
[Illustration: Fig. 101.--The beak of chicken.]
[Illustration: Fig. 102.--Modelling beak on chicken.]
[Illustration: Fig. 103.--Paper chicken nearly finished.]
[Illustration: Fig. 104.--Hungry little paper chicken.]
Cut a square of the same kind of tissue paper, measuring nine and
one-half inches on all four sides; fold diagonally twice across the
square as when making a paper pin-wheel. The centre of the square is
exactly where the diagonal lines meet and cross; pinch the centre
portion up into a beak and tie it with a string (Fig. 101); then fit the
beak over the centre of the chicken's head, bringing the paper entirely
over the head on all sides; tie the square around the chicken's neck
close up to the head (Fig. 102). The two points A and B of the square
must form the wings, while C is carried backward over the under portion
of the body and D back over the upper part, the two ends C and D being
brought together and tied tight up to the body to form the tail. In Fig.
103 you will see exactly how to pinch up the wing if you notice
particularly the upper part of the wing B, next to the body. The wing A
on Fig. 103 shows how the two wings must be tied close to, but not on,
the body. When each wing is tied, make the tail of C and D by tying the
extensions together as explained above; that done, bend down the legs,
spread out the wings and tail, open out and flatten the feet, then
stand the little chicken on a level surface (Fig. 104). Remember always
to crease the tissue-paper with the grain of the paper; if you attempt
to cross the grain the paper will be very apt to tear.
The Turkey
[Illustration: Fig. 105.--The astonished paper turkey.]
[Illustration: Fig. 106.--Modelling turkey's body.]
[Illustration: Fig. 107.--Legs and feet of turkey.]
[Illustration: Fig. 108.--Head modelled on turkey.]
(Fig. 105) is also modelled from half a sheet of tissue-paper as near
the general color of a turkey as can be found. Make Fig. 92 and Fig. 93
of the paper; then fold Fig. 93 five and three-quarter inches from one
end (Fig. 106, F). Three inches from this end tie the two layers
together (Fig. 106, G). Fold the strips back and tie a string through
the lower loop up over the loose top layer (Fig. 106, H). Wind the
extreme end of the paper (Fig. 106, O), with string to form the beak
(Fig. 107), bend the beak down and tie it to the neck to form the top of
the head (Fig. 108, P). Make the legs and feet as you did those for the
chicken (Fig. 98) and slide them through the body so that one fold of
the body will be above and two beneath the legs (Fig. 107). Cut the
wings from a separate piece of tissue-paper (Fig. 109). Let the paper
measure seven inches on the widest side, five on the opposite side, and
four and one-half on each of the other sides. Pinch the paper together
through the centre and tie (Fig. 110). Gather up one wing, so that it
will not tear, and slip it through the body, immediately over the legs,
with the widest side toward the front (Fig. 105), leaving the other wing
out free on the other side of the turkey. Bend down the legs, spread the
tail out fan shape and bend it up; open out the wings and drop them
downward and forward (Fig. 105). Flatten out the feet and stand up the
turkey (Fig. 105).
[Illustration: Fig. 109.--Paper for turkey wings.]
[Illustration: Fig. 110.--Turkey wings.]
[Illustration: Fig. 111.--Elephant modelled of tissue-paper.]
The Elephant
(Fig. 111) will require two sheets of brown tissue-paper for its body,
head, and trunk, which are all made of a single strip of paper. Unfold,
spread out and fit the two sheets of tissue-paper together; then gather
up one side, as in Fig. 92, crease and gather up the other side (Fig.
93). Bind one end with black thread to the distance of four and one-half
inches to form the trunk; then fold the remainder of the strip into four
layers, beginning with the free end of the paper; fold over and over
three times. This gives the body and head. Bind black thread around the
folds next to the trunk to form the head. Make four legs of two pieces
of paper in the same way you formed those of the chicken (Fig. 98), only
the elephant's legs must be very much thicker. Slide the legs through
the body between the two layers of paper, shove the front legs forward
and the hind legs backward. For the tail use a small strip of the brown
tissue-paper. Wrap it around and around with black thread to within an
inch of the bottom and cut this end up into fringe. Fasten the tail on
the elephant with black thread, pass the thread between the first and
second layers of paper forming the back of the body of the animal and
tie the tail on the outside threads which cross from side to side of the
elephant; bend the top of the tail over the thread, as you would hang a
garment on a clothes-line, and tie the bent-over end down on to the tail
proper. Shape the ears like Fig. 112, pinch together the end S and tuck
it under the thread which separates the head from the body. Allow the
long side, M, to form the front of the ears. You can add white ivory
tusks if desired. Roll up two white writing-paper lighters and push an
end of each up in the head under the trunk, forming one tusk on each
side.
[Illustration: Fig. 112.--Elephant's ear.]
In making these little creatures do not forget that you must do some
modelling, bending and shaping them with your fingers, squeezing up the
paper where it stands out too far, and gently pulling it out in places
where it flattens too much. The heads can be turned to suit the fancy,
the bodies inclined this or that way, or they may stand stiff and erect.
You might model a number of chickens, of different-colored paper, some
yellow, some white, and others black, like real chickens; or make
several turkeys and two or three elephants, some of the latter with
tusks and others without. The toys when finished will cause exclamations
of delight and approval. They are simple and easy to put together,
something which will not cost much and yet be worth many times the
amount expended for the necessary material to manufacture. The little
animals are attractive, substantial toys, entirely different from the
common ones which any girl or boy with sufficient pocket money may
purchase.
CHAPTER X
NATURE STUDY WITH TISSUE-PAPER
A natural flower, some tissue-paper, a pair of scissors, a spool of
thread, and nimble fingers are all you need.
There are no patterns, only circles and squares and strips of paper
which you gather here, spread out there, wrap and tie some place else
and, with deft fingers, model into almost exact reproductions of the
natural flower before you.
With its unfamiliar terms to be committed to memory and the many parts
of the flower to be distinguished, botany is apt to prove dry and
tiresome to the little child, but to study nature by copying the flowers
in this marvellously adaptable material is only a beautiful game which
every child, and indeed many grown people, will delight in. The form of
the flower, its name and color, may, by this means, be indelibly stamped
upon the memory, and a good foundation laid for further study.
The Best Models
Ordinary garden flowers and those most easily procured make the best
models. The carnation-pink, the morning-glory, and the rarer blossoms of
the hibiscus, are well adapted to the work, also the daffodil and some
of the wonderful orchids.
Even holly with its sharp-spiked leaves and scarlet berries and the
white-berried, pale-green mistletoe may be closely copied. All these and
many more are made on the same principle and in so simple a manner even
quite a little child may succeed in producing very good copies from
Nature.
Material
Buy a sheet of light pink tissue-paper, another of darker pink, and one
of the darkest red you can find. Then a sheet of light yellow-green and
one of dark green. Have a table "cleared for action" and place your
paper on the right-hand side, adding a pair of scissors and a spool of
coarse thread, or, better still, of soft darning-cotton.
[Illustration: Carnations modelled from tissue-paper.]
With all this you are to copy the
Carnation-pink
which someone has given you or you have growing in your own garden. Make
one of your light pink paper, one of the darker pink, and another of the
rich, deep red to have a variety.
Lay your natural flower down on the left-hand side of the table, away
from your material but quite within easy reach, for it must be consulted
frequently. Seat yourself comfortably and don't work hurriedly.
[Illustration: Fig. 113.--Fold the square diagonally through the
centre.]
The first thing necessary in this system of squares and circles is to
know
How to Cut a Circle Quickly,
easily and accurately, and always without a pattern. Here is a method
which never fails:
[Illustration: Fig. 114.--The first triangle.]
Cut a square the size you wish to make your circle. That is, if you want
a circle with a diameter of four inches cut a four-inch square (Fig.
113). Fold the square diagonally through the centre according to the
dotted line on Fig. 113, and you have the triangle (Fig. 114). Fold this
at the dotted line and it will make another triangle (Fig. 115). Again
fold through the middle and you have the third triangle (Fig. 116). Fold
once more and Fig. 117 is the result. Measure the distance from the
edge, B, to the centre A in Fig. 117 and mark the same distance on the
other side of the angle shown by the dot, C (Fig. 117). With your
scissors cut across from C to B, curving the edge slightly, as shown by
the dotted line from C to B (Fig. 118). Fig. 119 is the circle still in
its folds. Fig. 120 is the circle opened, the dotted lines indicating
where it has been folded.
[Illustration: Fig. 115.--Second triangle.]
[Illustration: Fig. 116.--Third triangle.]
Your eye will soon become sufficiently accurate to enable you to gauge
the distance from A to B, and you can then cut from C to B without
measuring.
[Illustration: Fig. 117.--Fold once more.]
[Illustration: Fig. 118.--Cut from C to B, curving the edge.]
[Illustration: Fig. 119.--The circle still in its folds.]
Before Beginning Your Flower
take up the natural one and examine it carefully. You will notice that
it has a great many petals crowded closely together and that their
edges are pointed like a saw. You will also see that the green calyx is
wrapped snugly around the lower part of the flower and that it, too, has
a pointed edge.
[Illustration: Fig. 120.--The circle opened.]
Now hold the pink off at arm's length. The separateness of the petals
disappears and you see them only as a mass; the points on the edges are
not noticeable except as they give the flower a crimped appearance, and
the edge of the calyx looks almost straight. It is this last appearance
or the impression of the flower that you are to produce rather than its
many and separate little parts. So now to work.
[Illustration: Fig. 121.--The petals.]
[Illustration: Fig. 122.--Crimp the edge with your fingers.]
[Illustration: Fig. 123.--Draw these through your hand to bring them
closely together.]
[Illustration: Fig. 124.--Make a slender lighter.]
Cut Two Squares for Each Pink,
one measuring five and one-quarter inches, the other four and
three-quarter inches, and turn them into circles (Fig. 121) by the
method just explained. Take one of the circles at the centre, where the
folding lines cross, with the tips of the fingers of your left hand and
pinch it together; then, while still holding it, crimp the edge with the
fingers of your right hand (Fig. 122). Do this always with every kind of
flower, whether it is made of circles or squares. Without loosening your
hold of the centre, draw the paper lightly through your right hand
several times, then crimp the edge again, this time with the blade of
your scissors. Treat all the circles alike, then place a small circle
inside a larger one and draw them through your hand to bring them
together, pinching them closely until within a little over an inch of
the edge (Fig. 123). Make a slender lighter of ordinary writing-paper
(Fig. 124), snip off the point of the flower (D, Fig. 123), open the
other end a little and push the lighter through until its head is
hidden. This forms the stem. Wrap and tie with thread at the bottom of
the flower (Fig. 125), and again where the petals spread. This last is
to be but temporary, as you will remove the thread when the flower is
sufficiently pressed together to hold its shape.
[Illustration: Fig. 126.--The calyx.]
[Illustration: Fig. 125.--Wrap and tie at the bottom and where the
petals spread.]
[Illustration: Fig. 127.--Wrap the paper spirally around the stem.]
From your light-green paper cut a circle measuring three and one-quarter
inches through its diameter and cut it in two to make the half circle
for the calyx (Fig. 126). Remove the thread that holds the flower just
below its petals and wrap the calyx closely around the lower part, tying
it at the bottom; then cut a narrow strip of dark-green paper and wrap
it spirally around the stem, beginning at the top (Fig. 127). Let the
wrapper extend a little below the lighter and twist the end to hold it
in place. Spread the petals of your flower as much like the natural
blossom as possible.
Leaves
[Illustration: Fig. 128.--The leaves.]
For the leaves cut a strip of dark-green paper six inches long and
three-quarters of an inch wide (Fig. 128). Find the centre by folding
the paper end to end and making the crease shown by dotted line in Fig.
128. Gather it along this line, not with needle and thread--we use no
needle in this work--but with your fingers, and pinch it together; then
twist each end into a point (Fig. 129). With the sharp point of your
scissors punch a hole directly through the centre (E, Fig. 129), and
push the point of the stem through the hole, bringing the leaves as far
up on the stem as you find them on the natural flower; then wrap and tie
them in place.
[Illustration: Fig. 129.--Twist each end into a point.]
The Bud
is made of a circle of dark-green paper the diameter of which is three
and one-quarter inches (Fig. 130). Gather this circle between your
fingers as you did the others and crimp the edge with the scissors. It
will then form a little bag or cup like Fig. 131. Slip the bag over the
head of a lighter and tie at the bottom as in Fig. 132. If the bud does
not take the proper shape at first, model it with your fingers until it
is correct. Start the wrapping of the stem just above where the bud is
tied and finish as you did the stem of the pink. Use small leaves on the
bud stem, having the strip of paper just as wide, but considerably
shorter than for the leaves on the stem of the open flower.
[Illustration: Fig. 130.--The bud.
Fig. 131.]
It is wonderful how very natural these blossoms appear. At a short
distance no one would think they are not the real, old and familiar
pinks. Only the fragrance is missing, and that may also be supplied and
a spicy odor given by enclosing a whole clove in the heart of each
flower.
The Morning-Glory
From your pale-pink paper you can make the delicately beautiful
morning-glory. Have the natural flower with its stem and leaves to copy
from, even if the blossom is not the color you want. As with the pink,
it is the general form and appearance we strive for in the
morning-glory, not the detail.
[Illustration: Fig. 132.--Slip the bag over the head of a lighter.]
Make your pink circles with a diameter of about seven inches. It is
always better to have your flowers a trifle larger than the natural
ones, rather than smaller.
But one circle is required for each morning-glory. Crimp this in your
fingers and draw through your hand as you did the circles for the pinks;
then, pinching it together to within one and one-half inches of the
edge, hold it in your left hand and flatten out the top as in Fig. 133.
See that the fulness is evenly distributed, and pull and straighten out
the edges until you are satisfied with its appearance.
[Illustration: Morning-glory modelled from tissue-paper.]
[Illustration: Fig. 133.--Flatten out the top of the flower.]
A piece of bonnet-wire makes the best stem if you wish to give the true
viney effect of the growth. If it is only the blossom you are making, a
paper lighter will answer. When you use the wire bend one end over to
form a small loop; this is to keep the stem from slipping through the
flower. Pass the straight end of the wire through the centre of the
flower and draw it down until the loop is hidden.
[Illustration: Fig. 134.--Green square for calyx.]
[Illustration: Fig. 135.--Draw the edges down.]
[Illustration: Fig. 136.--Form a leaf-shaped point.]
Make
The Calyx
of a square of light-green paper measuring about four and one-half
inches. Fold the square four times through the centre to form the
creases shown by the dotted lines in Fig. 134. Hold the square at the
centre and draw the edges down as in Fig. 135; then bring the two edges
together in gathers, just below one of the corners, to form a
leaf-shaped point as in Fig. 136. Gather below each corner, tie as in
Fig. 137, and twist each corner into a sharp point like F, Fig. 137.
Draw the calyx through your hand, bringing the points together (Fig.
138). Push the calyx up on the stem and tie just at the base of the
flower, then tie again about three-quarters of an inch below and wrap
the remainder of the calyx close to the stem. Wind the stem with
light-green tissue-paper and bend it as the natural one is bent and
curved.
[Illustration: Fig. 137.--Twist each corner into a point.]
Make several buds of the pink paper, following the directions given for
the green bud of the pink; then twist each bud at the point and add a
calyx.
The wilted flower shown in the illustration is made by taking one of the
morning-glories you have just finished and actually wilting it by
drawing the flower together and creasing and pressing it to resemble the
partially closed and drooping natural blossom.
Only a piece of dark-green paper six inches square is required to model
two almost perfectly shaped morning-glory leaves.
[Illustration: Fig. 138.--Bring the points together.]
[Illustration: Fig. 139.--Gather along one of the creases.]
[Illustration: Fig. 140.--The morning-glory leaves.]
Fold the square twice diagonally across from corner to corner to find
its centre; then begin at one corner and gather along one of the
creases until you reach the centre (Fig. 139). Start again at the
opposite corner, gather along the crease to the centre, then wrap and
tie (Fig. 140). Pinch each leaf from underneath along the crease in the
middle, to give the depression at the midrib. Straighten the leaf out a
little at its widest part and you will find you have made a pair of
leaves which are surprisingly natural. Wrap and tie these to the stem
and make as many more as you think are needed.
The Daffodil
is of such a different nature it hardly seems possible that it can be
made on the same principle as the other flowers, yet the work is
practically the same.
[Illustration: Daffodils modelled from tissue-paper.]
[Illustration: Fig. 141.--For the two extra petals.]
[Illustration: Fig. 142.--Pinch and tie in place.]
[Illustration: Fig. 144.--Cut off the ragged end.]
[Illustration: Fig. 145.--Fit each loose petal between two of the
others.]
[Illustration: Fig. 143.--Bring together the fan of paper below the
petal.]
Match the tint of your natural daffodil in yellow tissue-paper as nearly
as possible, and then cut two squares for each flower measuring about
five and one-half inches. Fold the squares crosswise and diagonally
through the centre as you did for the calyx of the morning-glory (Fig.
134), and cut one square in half along one of its diagonal folds (Fig.
141). Gather the square two and a quarter inches below each corner and
tie as in Fig. 137, but do not twist the points. This gives you four
petals, but as the daffodil has six, you must make two more from the
triangular halves of the square you have just cut. Gather each triangle
across from side to side, according to the dotted line in Fig. 141, and
pinch and tie in place as in Fig. 142, making sure the petal is of
exactly the same size as those on the square. Bring together the fan of
paper left below the petal and wrap and tie as in Fig. 143, then cut off
the ragged end (Fig. 144). Draw the petals of the square together as
you did the calyx, and insert the stem made of a paper lighter. Put in
place the two extra petals, pushing the wrapped ends down into the heart
of the flower; fit each loose petal between two of the others and tie
(Fig. 145).
[Illustration: Fig. 146.--Pinch the cup together.]
[Illustration: Fig. 147.--Slip the cup on your finger like a thimble.]
[Illustration: Fig. 148.--Insert the stem of the cup into the centre of
the flower.]
Turn back to the bud of the pink (Fig. 130), and from a circle of the
yellow paper, with a diameter of four inches, make the cup (Fig. 131),
using the scissors to give a fine crimp to the edges. Pinch the cup
together at the bottom almost half-way up and tie (Fig. 146); slip it on
your finger like a thimble and press it into shape like Fig. 147. Insert
the point or stem of the cup into the centre of the flower and tie in
place just below the petals (Fig. 148).
Cut a two and three-quarter-inch square from light-brown paper and
divide it diagonally in half for the calyx. Examine your natural
daffodil and notice how loosely the calyx seems to be wrapped around the
flower. Imitate this by leaving the point loose at the top, while you
wrap the bottom of the calyx closely around the stem. Allow the wrapping
for the stem to cover the lower part of the brown calyx. Make several
long, narrow leaves from strips of dark-green paper, two inches wide and
of varying lengths. Twist one end of each leaf into a point and,
gathering the other end, draw it through your hands until it stands up
stiffly. Wrap each leaf partly around the stem and tie in place,
following as closely as possible the natural growth of the leaf on the
stem. Bend the stem just below each flower, being careful not to break
the paper lighter which forms it.
If you use thread the color of the flowers for tying and green for the
stems the effect will be almost perfect.
CHAPTER XI
A NEW RACE OF DOLLS
LIKE the little animals, these dolls are modelled of tissue-paper and
they are equally substantial and durable. The dolls, as well as their
dresses, shoes, and bonnets, are made without taking a stitch or using
glue or paste. Nothing could be prettier or more suitable to hang on the
Christmas-tree than these little ladies decked out in their fluffy
tissue-paper skirts, and nothing will give greater delight to the
children.
[Illustration: Here she comes. Little Miss Muffett.]
To make
Little Miss Muffett
you will need eight sheets of white tissue-paper, two sheets of flesh
pink, not too deep in color, a quarter of a sheet of light-brown or
yellow, and a small piece of black. Her underclothes will require one
sheet of white and her dress and bonnet one sheet of any color you
consider most becoming.
[Illustration: Fig. 149.--Creased tissue-paper for making doll.]
[Illustration: Fig. 150.--Six sheets of tissue-paper folded together for
making doll.]
[Illustration: Fig. 151.--Head of doll.]
[Illustration: Fig. 152.--Head tied on body.]
Take one sheet of the white paper at a time and draw it lengthwise
through your hands, creasing or crimping it as in Fig. 149. Do this to
all the eight sheets. Then, pulling six of them partly open, place them
evenly one on top of another and fold through the middle (Fig. 150).
Take another sheet of the crimped paper and roll it into a ball like
Fig. 151. Open the folded paper, place the ball in the middle, bring the
paper down over the ball and wrap and tie just below with coarse linen
thread or white darning-cotton (Fig. 152). This is the head, which you
must model into shape with your fingers, squeezing it out to make it
fuller and rounder at the back and pinching it to give a chin to the
face. Fold another crimped sheet like Fig. 153 for the arms. You will
notice the ends do not quite reach the folds. The space left should
measure a little over one inch. Crimp half a sheet of the pink paper
and with it cover the arms; allow the pink to extend equally at each end
beyond the white and fold over the ends, tying them as in Fig. 154. Then
tie the loose ends down as in Fig. 155. Open the paper just below the
head, slip the arms in place and tie below (Fig. 156).
[Illustration: Fig. 153.--Beginning the arms.]
[Illustration: Fig. 154.--Pink paper over arms.]
[Illustration: Fig. 155.--Outside of arms tied over inside.]
Spread out your smooth sheet of pink paper, place the doll's head
directly in the centre and draw the paper down over head and body; keep
it as smooth as possible over the face and wrap and tie at the neck
(Fig. 157). Push the pink paper up on the shoulders and cut a slit about
six inches long lengthwise through the middle of the entire mass of
paper, as shown in Fig. 157. Wrap and tie each of the legs (Fig. 158)
and tie once more under the arms (Fig. 161). Fold the bottom edges under
and model the feet in shape (Fig. 158). The wrappings at the thighs and
knees take slanting lines, which give a more natural shape to the legs
than if the thread were simply wrapped round and round as at the ankles.
[Illustration: Fig. 156.--Arms in place.]
Paint the Face
of Little Miss Muffett with water-colors, placing the features low on
the head to give a babyish look, and make the eyes large and mouth
small. Color the cheeks and chin a deeper pink, and put little touches
of red just above the eyes near the inner corners and little streaks of
blue just below the eyes.
[Illustration: Fig. 157.--The pink skin of tissue-paper over doll.]
[Illustration: Fig. 158.--Modelling legs of doll.]
Miss Muffett's curls are furnished by
The Wig,
which you are to make of brown or yellow paper, or black if you want a
little brunette.
Cut a circle seven and one-half inches in diameter, and on the edge cut
a fringe one inch in depth (Fig. 159). This is the hair, which you must
curl by drawing it lightly over the blade of a penknife or scissors
(Fig. 159).
Fit the wig on Miss Muffett's head, holding it in place with pins until
you can tie it on just back of the curls (Fig. 161).
[Illustration: Fig. 159.--The wig.]
Now for the little lady's clothes. To make
The Shoes,
which will be her first article of dress, cut out of the black
tissue-paper two circles measuring four and one-half inches in diameter
(Fig. 160); place one foot in the middle of a circle, draw the paper up
around the ankle and wrap a number of times before tying. Put the other
shoe on the other foot in the same manner, and your doll will look like
Fig. 161.
[Illustration: The shoe.]
[Illustration: Fig. 160.--Pattern of shoe.]
Miss Muffett's Lingerie
consists of a union garment (Fig. 162) and a white skirt (Fig. 163).
From one end of your remaining sheet of white paper cut a strip about
seven inches wide, and at the middle cut a slit half-way up (Fig. 162).
Draw this through your hands to crimp it, the creases to run lengthwise,
that is, from top to bottom. Fit the little garment to the body, tying
it just below the arms and again above the knees, where it will form
ruffles.
Cut the white skirt in a circle seventeen inches in diameter with a
circular opening in the centre (Fig. 163). Crimp the skirt and put it on
over the feet, not the head, of the doll, wrapping and tying it in place
around the waist.
Not only may tissue-paper be purchased in all colors, with their various
shades and tints, but in pretty little checks, plaids, and figures as
well, so Miss Muffett may have a dress equal in appearance to the cotton
or silk gown of her china sisters.
[Illustration: Fig. 161.--Ready to be dressed.]
Cut the skirt of
The Dress
after the white skirt pattern (Fig. 163), and the waist like the smaller
circle (Fig. 164), which has one slit, from outer to inner edge, added
to the opening at the centre.
[Illustration: Fig. 162.--Union garment.]
[Illustration: Fig. 163.--White skirt.]
[Illustration: Fig. 164.--Waist pattern.]
[Illustration: Fig. 165.--Pattern for sun-bonnet.]
[Illustration: Fig. 166.--Bonnet folded.]
This waist circle should measure ten inches in diameter. Do not crimp
the dress skirt, but put it on in all its crisp freshness, and tie in
place at the waist-line. Adjust the waist on Miss Muffett, bringing the
slit opening at the back. It looks very much like a cape now, doesn't
it? But draw the fulness in at the bottom and around the arms at the
shoulders, and you have a little waist with full short sleeves. Tie the
waist rather high, and bring it down to bag slightly over the skirt as
shown in the illustration of Miss Muffett. Cut
The Sun-Bonnet
of the same paper as the dress. Fig. 165 shows the pattern, which is ten
inches long and nine inches wide. Fold the straight edge over three
times, according to the dotted lines in Fig. 165, making the folds one
and one-quarter inches wide. Fig. 166 shows the bonnet folded, and the
dotted line around the curve indicates where it is to be gathered in at
the neck.
[Illustration: The sun-bonnet.]
Fit Fig. 166 on Miss Muffett's head, allowing the folded edge to extend
slightly beyond her face, then draw the bonnet down at the back and
gather it in with your fingers until it sits snugly to the neck. Through
the middle of the fold, one inch from each end, puncture a hole, and
through these two holes pass the thread that goes around the back of the
bonnet and ties under Miss Muffett's chin. See illustration of
sun-bonnet.
CHAPTER XII
AN INDIAN ENCAMPMENT
AN Indian encampment for your very own! A wigwam, camp-fire, Indian
travois, blanket-weaving loom, gorgeous feathered head-dress, bow,
arrows and shield, tomahawk, wampum, and a little copper-colored papoose
in its funny stiff cradle, hanging on a tree entirely alone! Does not
all that sound delightful? The complete scene can actually be made to
appear in your room at home.
Take for
The Ground
a common pastry-board or any kind of board of the desired size--about
nineteen by twenty-six inches--and for grass cover one side and the four
edges of the board with a piece of light-green cotton flannel stretched
tight, fleece side up, and tacked to the under side of the board.
Sprinkle sand and small stones on the grass at one side of the wigwam,
to show where the grass has been worn off by the tramping of the
Indians, the bronco pony, and the dog, for all Indians possess dogs of
some description. If you have a toy dog of suitable size, stand him by
the fire where he will be comfortable. Before the red men owned horses,
a dog was always used to drag the travois, and to this day the braves
care as much for a dog as does any pale-faced boy--which is saying
much, for a white boy and any kind of a dog make devoted friends and
comrades.
[Illustration: Fig. 167.--Home-made compass.]
Now that we have our camping-ground, the first thing we must do is to
Put Up the Wigwam
for shelter. Draw an eight-inch diameter circle on the grass near one
end of the ground. Fold a strip of paper lengthwise, stick a pin through
one end of the paper and drive it down into the board where you wish the
centre of the circle, push the point of a lead pencil through the other
end of the paper four inches from the pin; keep the pin steady while you
move the pencil around many times until a circle appears plainly on the
grass (Fig. 167).
[Illustration: Fig. 168.--Pole sharpened to flat point.]
Cut twelve slender sticks eleven inches long and sharpen the heavy end
of each into a flat point (Fig. 168). The sticks must be straight, for
they are wigwam-poles. Tie three poles together two inches from their
tops and spread out the sharpened ends at nearly equal distances apart
on the circle line; mark the spots where they rest and bore gimlet-holes
in each place through the cloth into the wood. Enlarge each hole with a
penknife and insert the poles, pushing the sharpened points down firmly
into the holes (Fig. 169). Add seven more poles around the circle,
keeping the spaces between all about even. Sink these last poles in the
ground as you did the first three; then tie the tops together around
the first three poles, and you will have the wigwam framework of ten
poles standing strong and firm.
[Illustration: Fig. 169.--First three poles planted firmly in edge of
circle for wigwam.]
[Illustration: Fig. 170.--Cover for wigwam.]
Make the cover of unbleached or brown-tinted cotton cloth cut like Fig.
170. Mark the curved lower edge with the home-made compass used for the
grass circle. Fasten the pin and pencil in the paper strip nine and
one-half inches apart; draw almost a half circle, then an inch and a
half from the spot A (Fig. 170), where the pin is stationed, begin to
cut the opening for the top of the wigwam poles, B (Fig. 170). Slash the
point C in as far as D, sew pieces of cloth over the points E and E,
leaving the opening at dotted lines to form pockets for the smoke-poles.
Cut two rows of little holes on each side of the upper part of the
wigwam to run the pinsticks through when fastening the wigwam together
(Fig. 171).
Now comes the fun of decorating the cover. Pin the cloth out flat and
smooth, and paint in brilliant red, yellow, black, green, white, and
blue the designs given in Fig. 170. When finished, fit the cover over
the wigwam-poles and with short, slender sticks pin the fronts together.
Peg the lower edge down to the ground with short black pins and slide a
pole in each pocket of the smoke-flaps E and E (Fig. 170). Bring the
poles around and cross them at the back of the wigwam. As you do this
you will exclaim with delight at the result, for the little wigwam will
be very realistic.
In front of your wigwam or tepee
Build a Make-Believe Fire
of bits of orange and scarlet tissue-paper mixed in with short twigs,
and then you must manufacture something to cook in. Bore a hole in the
ground near the fire and fit in the fire-pole, making it slant over to
one side and hang directly above the fire. Place a stone over the
embedded end of the pole to keep it firm. Suspend an acorn kettle or any
little kettle of the right size for the Indians to use on the pole and
the camp will begin to look cosey for the red men to enjoy. Hunt up a
jointed doll about five inches high, paint it copper color, ink its
hair, and the doll will be a fairly
Good Indian.
If you can find a Zulu doll of the required size, with long, straight
black hair, and give him a wash of dull red paint, you can turn him into
a fine Indian. Failing these dolls, make an Indian doll of dull red
raffia or cloth. This you can do if you try, and remember to have your
red man a little more slender than store dolls; most of these are rather
too stout to make good Indians.
[Illustration: Fig. 171.--Wigwam with make-believe camp-fire.]
Real chiefs like Turning Eagle, Swift Dog, Crazy Bull, and others, wore
gorgeous feather headdresses, and gloried in the strange war bonnets,
not because they were gay and startling, but for the reason that each
separate feather in the head-band meant that the owner had performed a
brave deed of which the tribe was proud, and the greater the number of
brave deeds the greater the number of feathers; consequently the longer
the bonnet-trail. This explains the real meaning of the common
expression, "A feather in your cap."
[Illustration: Fig. 172.--Pattern for war bonnet.]
Your Indian must be a mighty chief and will need a very long-trailing
War Bonnet.
Cut the head-dress like Fig. 172 of white paper. Paint all the paper
horse-hair tips on the paper eagle feathers red, the tops of the
feathers black, and the band in which they are fastened yellow, red, and
green, leaving white spaces between the colors (Fig. 173). Cut out, then
turn the end of the band F (Fig. 172) until the loop fits the Indian's
head, and glue the end of the loop on the strip (Fig. 173). Paste
fringed yellow paper around each of the chieftain's feet, fringed edge
uppermost, to serve as moccasins. Part the Indian's hair at the back,
bring the two divisions in front, one on each side of the head, and wind
each with scarlet worsted as the real Indian wears his hair, then wrap
around your red man a soft, dull-colored cloth extending from the waist
to the knees. Pin the drapery in place and the chief will be ready to
take charge of his bronco pony, which may be any toy horse you happen to
possess. The horse in the illustration is an ordinary cloth toy.
[Illustration: Fig. 173.--Indian war bonnet.]
[Illustration: Fig. 174.--Tie the four poles together and tie thongs
across centre for your travois.]
Red men are not fond of remaining long in one place, and naturally your
Indian will soon want to break camp and carry his belongings elsewhere.
Help him prepare by making
A Travois.
You will need four slender poles, two fifteen and one-half inches long,
one five and one-half and another six and one-half inches long. Bind the
six-and-a-half-inch pole across the two long poles four inches from
their heavy ends; fasten the five-and-a-half-inch pole across the long
poles two and one-half inches above the first cross-piece. Instead of
thongs of buffalo hide, such as the real red man would use, take narrow
strips of light-brown cloth to form the rude net-work over the space
bounded by the four poles. Tie the top ends of the long poles together
(Fig. 174), then tie the travois to the horse, as in Fig. 175. In most
of these conveyances the thongs are tied across one way only, from short
pole to short pole, forming a ladder-like arrangement.
[Illustration: Fig. 175.--Travois ready for camping outfit.]
[Illustration: Fig. 176.--Different parts of straw calumet.]
[Illustration: Fig. 177.--Calumet finished.]
A chief must always have his
Calumet,
or "pipe of peace," to smoke and pass around the council circle, when
all the leaders of the different tribes meet to talk over important
matters concerning the welfare of their people. Real calumets are
generally large and of goodly length, some of them being four feet long.
They are made of dull-red stone, which, when first cut from the large
mass, is soft enough to be carved out with a knife; later the pipe
becomes hard and capable of receiving a polish. But as the red stone is
not within our reach, we must use dull red-colored straw for the
calumet. Soak the straw in hot water to render it less brittle. Then cut
a three-inch length piece; make a hole in it a short distance from one
end (Fig. 176, G) and insert a three-quarter inch length of straw for
the pipe bowl (Fig. 176, H). For the mouthpiece take a half-inch length
of white straw (Fig. 176, I), and slide it in the other end of the pipe.
Glue both bowl and mouthpiece in place and decorate the calumet with
red, green, and white silk floss tied on the pipe stem (Fig. 177).
The Tomahawk
must not be forgotten. Soak a stick two and one-half inches long in hot
water; when it is pliable, split an end down one inch, no more (Fig.
178, J), and in true Indian fashion bind a stone hatchet (Fig. 178, K)
between the split sides of the stick handle with thongs of hide. Whittle
the little hatchet from a piece of wood, cover it with glue, then with
sand. When dry it will be difficult for others to believe that the
implement is not of real stone. Instead of thongs use thread (Fig. 179).
[Illustration: Fig. 178.--Handle and hatchet for tomahawk.]
[Illustration: Fig. 179.--Tomahawk ready for use.]
The Chieftain's Shield
is of hide taken from the neck of the bull bison; the piece must be
twice the required size for a finished shield to allow for the necessary
shrinkage. Over a fire built in a hole in the ground the skin is
stretched and pegged down. When heated, it is covered with a strong glue
made from the hoofs and joints of the bison, which causes the hide to
contract and thicken. As this process goes on the pegs are loosened and
again adjusted until the skin ceases to contract and absorb the glue.
Then the hide is much smaller and thicker than at first. When it has
slowly cooled, the skin is cut into a circle and decorated. Though
pliable, the shield is strong enough to ward off blows from arrows or
spears.
[Illustration: Fig. 180.--Diagram for shield.]
[Illustration: Fig. 181. Eagle feather of paper.]
[Illustration: Fig. 182.--Decorated Indian shield.]
Bison hide is something you cannot obtain, so take writing paper for the
shield. Cut it into a circle an inch and a half in diameter, with an
extension for the handle (Fig. 180). Glue the free end of the handle on
the opposite side of the back of the shield. Make ten paper eagle
feathers (Fig. 181), hang seven on the bottom of the shield with red
thread, after first decorating the centre of the shield with given
designs and the edge with colored bands, using any or all of the
following colors, but no others: positive red, blue for the sky, green
for the grass, yellow for the sun, white for the clouds and snow, and
black. To the Indian color is a part of religion. Purple, pinks, and
some other colors, the red man, loyal to his beliefs, can never bring
himself to use. Attach two of the remaining feathers at the top and
another on the centre of the shield, as shown in Fig. 182.
The Indian makes his
Arrow-heads
of triangular flakes of flint chipped from a stone held between his
knees and struck with a rude stone hammer. The pieces knocked off are
carefully examined, and only those without flaws are kept. Stones for
arrow-heads must be very hard. When found, the red men bury them in wet
ground and build fires over them, causing the stones to show all cracks
and checks. This enables the arrow-maker to discard those unfitted for
his work.
[Illustration: Fig. 183.--Paper flint arrow-head.]
Though you cannot make a real flint arrow-head, you can manufacture a
toy one. Take a piece of stiff pasteboard and cut it like Fig. 183. Let
the length be a trifle over half an inch. Cover the arrow-head all over
with a light coat of glue, then dip it in sand, and the arrow-head will
come out as if made of stone. Were it actually hard stone and large size
you would be obliged, as the Indians do, to trim and shape more
perfectly the point and edges of the arrow-head. You would hold a pad of
buckskin in your left hand to protect it from the sharp flint, and on
your right hand would be a piece of dressed hide to guard it from the
straight piece of bone, pointed on the end, which you would use to
strike off little bits of stone along both edges, working cautiously as
you neared the point in order not to break it. But such work will not be
needed on your arrow-head.
[Illustration: Fig. 184.--Insert arrow-head in shaft.]
[Illustration: Fig. 185.--Arrow-head and shaft bound together.]
For
The Shaft
hunt up a piece of wood strong and straight. Cut it three inches in
length, remove the bark and scrape the wood until it is about the
thickness of an ordinary match. Notch one end and split the other end
down one-quarter of an inch, insert the arrow-head (Fig. 184), then bind
the shaft and head together with thread (Fig. 185), in place of the wet
sinew an Indian would use for a real arrow, after he had first fastened
the head in the shaft with glue from buffalo hoofs.
[Illustration: Fig. 186.--Paper feather for arrow.]
[Illustration: Fig. 187.]
Cut three paper feather strips (Fig. 186), each an inch in length, paint
black bands on them, bend at dotted line and glue the feathers on the
shaft one-quarter of an inch from the notch, allowing them to stand out
at angles equally distant from each other (Fig. 187). Bind the
extensions L and M (Fig. 186) to the shaft, and tie tufts of white and
red worsted on immediately above the feathers to help in finding the
arrow (Fig. 188). Paint the shaft in brilliant colors.
Almost any kind of wood that has a spring will make
A Good Bow
for your little Indian. Cut the piece of wood four inches long and an
eighth of an inch wide. Scrape it flat on one side and slightly rounded
on the other, notch the stick at each end, wind the centre with red
worsted and paint the bow in bright hues (Fig. 189). Tie a strong thread
in one notch and bring it across to the other notch; tighten until it
bends the bow centre half an inch from the straight thread; tie the
thread around the notch (Fig. 190). Now try the wee weapon; hold it
vertically and shoot the little arrow into the air. It will fly very
swiftly away, landing many yards from where you stand.
[Illustration: Fig. 188.--Finished arrow.]
[Illustration: Fig. 189.--Bow ready for string.]
[Illustration: Fig. 190. Bow string.]
Make the bow case (Fig. 192) of ordinary wrapping paper cut like Fig.
191, three and a half inches long and two and a half inches wide. Fold
the paper lengthwise through the centre and glue the sides together
along the dotted lines; then fringe the edge up to the dotted line and
decorate with gay paint.
[Illustration: Fig. 191.--Cut bow case like this]
[Illustration: Fig. 192.--Bow case finished.]
Dress the jointed doll squaw in a fringed
Chamois-Skin Gown;
fold the skin and let one half form the front, the other half the back.
Cut the garment like the half N, in Fig. 193, stitch the sides together,
stitch the under part of the sleeves together and fringe both sleeves
and bottom of the dress (O, Fig. 193). Belt the gown in with scarlet
worsted and load the squaw down with strands of colored beads; then seat
her on the grass (Fig. 194) while you make the primitive loom for her to
use in weaving one of the famous
Navajo Blankets.
[Illustration: Fig. 193.--Squaw's chamois dress.]
Paint a two by four inch piece of white cotton cloth with a blanket
design in red and black, with white between the markings, and pin it
securely on a board (Fig. 195). Tie stones to a pole six inches in
length (Fig. 196); with long stitches fasten the stone-weighted pole to
the bottom edge of the painted cloth blanket (Fig. 197).
[Illustration: Fig. 194.--Squaw doll make-believe weaving Navajo blanket
on primitive loom.]
Two inches above the blanket attach a six-inch pole to the board with
pins and use a coarse needle and heavy thread to make the warp. Run the
thread through the wrong side of the blanket and up around the pole.
Cross it on the under side of the long thread (P, Fig. 197) which
extends from blanket to pole.
[Illustration: Fig. 195.--Indian blanket pinned on board.]
[Illustration: Fig. 196.--Stones tied to pole for bottom of loom.]
[Illustration: Fig. 197.--Building primitive loom.]
Carry the thread along the pole a short distance, loop it over (Q, Fig.
197) and bring the thread down through the right side of the blanket.
Take a long stitch and again carry the thread up over the pole. Continue
until the warp is entirely across the blanket. Pin another pole six and
a half inches long, three-quarters of an inch above the top pole, and
fasten the two poles together by tying loops of string across from one
to the other (Fig. 198).
[Illustration: Fig. 198.--Primitive loom ready for frame.]
Make the loom frame of two seven-inch poles four and a half inches apart
and crossed at the top by another seven-inch pole, the three firmly tied
together and made to stand erect on the grass by planting the two
upright poles in holes bored through the cloth grass into the board
ground. Hang the loom on this frame by winding a narrow strip of cloth
loosely around the top of the frame and top of loom (Fig. 194).
[Illustration: Fig. 199.--Natural twig and tissue-paper tree.]
Find a stout, short-branched twig for
The Tree
(Fig. 199). Sharpen the bottom and drive it into a hole in the ground.
For the foliage cut a fringe of soft green and olive-brown tissue-paper
folded lengthwise in strips. Crimp the strips with a blade of the
scissors, then open out the fringe; gather each one through the centre,
give the paper a twist, and the two ends will form bunches of foliage.
Work the twisted centre of one piece down into a crack at the top of the
tree. Over across this at right angles in another opening, fit in the
second twist of paper foliage and crown all with a bunch standing
upright as shown at Fig. 199.
[Illustration: Fig. 200.--The little papoose you can make.]
[Illustration: Cradle for papoose.]
A solemn
Little Papoose
bound in its stiff cradle is one of the drollest things imaginable.
Paint a small doll copper color, make its hair black, and bind the baby
in a cradle cut from brown pasteboard (Fig. 200). Cut along heavy line
and bend forward the tongue R along the dotted line, bring the strap S
across and glue the end on the under side of the cradle; then line the
cradle with white tissue-paper and place the Indian child on it; spread
a piece of vivid red tissue-paper over the infant, bringing the sides of
the cover on the under side of the cradle, where you must glue them.
Fold over the lower end of the paper and glue that also on the back of
the cradle. Paint the cradle and portions of the cover white, green,
black, and yellow (Fig. 200); then hang the cradle and baby on the limb
of the tree (Fig. 199), where the little papoose will be safe while his
squaw-mother works at her weaving.
The red men use queer money which they call
Wampum.
It is made of shells found usually along the borders of rivers and
lakes. The Indians cut the thick part of the shell into cylinders about
an inch long, bore holes lengthwise through the centres and string them
like beads on fine, strong sinews (Fig. 201), but this money is not as
pretty as glass beads, for it resembles pieces of common clay pipe
stems. A certain number of hand-breadths of wampum will buy a gun, a
skin, a robe, or a horse, and when presented by one chief to another the
wampum means good-will and peace. Of course, you will want to supply
your Indians with their own kind of money. You can string the wampum
into a necklace and decorate the strand with eagle claws, bright beads,
and tufts of gay worsted.
[Illustration: Fig. 201. Wampum, Indian money.]
[Illustration: Fig. 202. Buffalo claw cut from wood.]
Find some beads much smaller, but as near as possible in color and form
to real wampum, and string them with tiny eagle claws made of wood cut
like Fig. 202, only smaller. Paint the claws very dark gray, almost
black, and bore a hole through the heavy end with a hat-pin heated red
hot. The claws will then string easily and give quite a savage
appearance to the necklace (Fig. 203).
Let the colored worsted tufts, which must take the place of hair, be
bright-red, and the strands of round beads on each side of the necklace
of various colors (Fig. 203).
[Illustration: Fig. 203.--Indian necklace of wampum, eagle claws, tufts
of hair, and bone beads.]
Indians when they cannot obtain beads use gayly colored porcupine quills
for their embroidery. You need not try the embroidery, but be sure to
make the entire Indian encampment with everything pertaining to it.
CHAPTER XIII
A TOY COLONIAL KITCHEN WITH FAC-SIMILE COLONIAL FURNISHINGS.
WOULD it not be fun to see a yoke of real live oxen come slowly walking
into the kitchen dragging a load of logs? That is what many of the
colonial boys and girls saw every day, and frequently the boys helped
their fathers cut the logs which were for the big kitchen fireplace. And
such a fireplace! Large enough for the huge, roaring fire and the
chimney-seats also. These were placed close against the sides of the
opening, making fine places for the boys and girls to sit and listen to
thrilling tales of adventure or delightful fairy stories.
[Illustration: A LITTLE COLONIAL KITCHEN, DRAWN FROM ONE MADE BY THE
AUTHOR.
Fig. 204.]
The kitchen in those days was the chief apartment and the most
interesting room in the house. Who would want to go into the stiff, prim
"best room" when they could be so much more comfortable in the spacious
kitchen where everyone was busy and happy, and where apples could be
hung by a string in front of the fire to roast and made to spin cheerily
when the string was twisted, that all sides might be equally heated? Any
girl or boy to-day would be only too glad of a chance to sit on a log
in front of such a fire and watch red apples turn and sputter as the
heat broke the apple skin, setting free the luscious juice to trickle
down the sides.
As the Indian's first thought was for shelter, and he put up his wigwam,
so the early settler's first thought was for shelter, and he built, not
a wigwam, but a log-house with a kitchen large enough to serve as a
general utility room. It was filled with various things, and all
articles in it were used constantly. Everything not brought from the
mother country the settlers made by hand. The colonial kitchen you can
build may be of gray or white cardboard. Old boxes, if large enough,
will answer the purpose.
[Illustration: Fig. 205.--Kitchen floor.]
I will tell you exactly how I built the colonial kitchen seen in Fig.
204. I made the floor (Fig. 205), the two side walls both alike (Fig.
206), the back wall (Fig. 207), and the interior of the fireplace (Fig.
208) of light-gray cardboard. I cut all the heavy lines, scored and
then bent all the dotted lines.
[Illustration: Fig. 206.--Side wall.]
[Illustration: Fig. 207.--Back wall.]
Now you do the same thing. Get your measurements correct and be careful
to make the lines perfectly straight. Before putting the kitchen
together, fasten the rustic brackets, cut from a branching twig (Fig.
209), on the wall above the mantel-piece to support the flintlock gun.
Take two stitches through the wall around each twig, as shown in Fig.
210, at the dots A and A and B and B (Fig. 207).
[Illustration: Fig. 208.--Interior of fireplace.]
Every colonial fireplace boasted of
A Strong Crane
upon which to hang the pots and kettles over the fire. One end of the
crane was bent down and attached to the side chimney wall by iron rings.
These rings allowed the crane to turn so that the extending iron rod
could be swung forward to receive the hanging cooking utensils and then
pushed back, carrying the pot and kettles over the fire for the contents
to cook. The crane was black and of iron. A hair-pin (Fig. 211) makes a
fine crane. Bend yours, as shown in Fig. 212, then with two socket-rings
made with stitches of black darning-cotton fasten the crane to the side
of the chimney at the dots C and C (Fig. 207), and tie a piece of the
darning-cotton on the little crane immediately below the lower
socket-ring; bring the thread diagonally across to the top arm of the
crane an inch and a quarter from the free end and again tie it securely
(Fig. 213).
[Illustration: Fig. 209.--A forked twig for the bracket.]
[Illustration: Fig. 210.--Put the brackets up in this way.]
[Illustration: Fig. 211.--The crane is made of a hair-pin.]
[Illustration: Fig. 212.--The crane.]
Bend the two sides of
The Fireplace
F and F (Fig. 207) as in Fig. 213. Bend forward the interior of the
fireplace (Fig. 208) at dotted lines, and fit Fig. 208 on the back of
Fig. 207 to form the inside of the fireplace and the mantel-piece. Slide
the slashed top strips of the sides of the fireplace D,D,D,D (Fig. 207),
back of the slashed strips D,D,D,D (Fig. 208), which will bring the two
centres E and E of the sides in Fig. 208 behind F and F in Fig. 207,
and will thus form two layers on the sides of the chimney. Push the edge
G and G of Fig. 208 through the slit G and G in Fig. 207 to form the
mantel-piece, then bend down the edge of mantel-piece along dotted line.
[Illustration: Fig. 213.--Back wall, showing crane hung and oven door
open.]
You must have
An Oven
at one side of the great fireplace for baking the wholesome "rye and
Indian" bread, and the delicious home-made apple, pumpkin, rice and
cranberry pies. In colonial days thirty large loaves of bread or forty
pies would often be baked at one time, so spacious were the ovens. These
side-ovens used to be heated by roaring wood fires built inside of them
and kept burning for hours. When the oven was thoroughly hot the cinders
and ashes were brushed out and in went the pies with a lot of little
ones called "patties," for the children. When these were cooked to a
golden brown each child was given his own piping hot "patty."
Make your box-like oven according to Fig. 214, cut the heavy lines,
score and bend the dotted lines. Bring the side H to the side I; lap I
over H so that the two slits, J and J, will exactly fit one over the
other; then bend the back down and run the flap J on the back through
the two slits J on the side, and the flap K through the slit K.
[Illustration: Fig. 214.--The oven.]
Adjust the oven back of the oven door L (Fig. 207), and fasten it tight
on the wall by sliding the flap M of the oven (Fig. 214) through the
slit M (Fig. 207) above the oven door; bend it down flat against the
wall. Bring the bottom oven-flap N in through and over the lower edge of
the oven door-way N (Fig. 207) and bend that also flat against the wall
(Fig. 213). The two side oven flaps will rest against the back of the
wall on each side of the oven door-way.
Now that is finished firm and strong, and you can
Put the Kitchen Together
in a few moments. Lay the floor (Fig. 205) down flat on a table; bend up
the two diagonal sides O and O, and slide the slit P in the side wall
(Fig. 206) down into the slit P of the floor (Fig. 205), bringing the
wall (Fig. 206) in front of the upturned floor-piece O (Fig. 205). In
the same way fasten the other side wall on the floor. Slip the two slits
Q and Q of the back wall (Fig. 207) down across the top slits (Q, Fig.
206) of the side walls. While bringing the back wall (Fig. 207) down to
the floor, slide its outside strips S and S over and outside of the
upturned pieces of the floor, S and S (Fig. 205), to hold them in place.
[Illustration: Fig. 215.--Pattern for andiron.]
As soon as the Indian's wigwam was up, he had a brisk fire to cook by,
for after shelter came food. The white man did likewise after his house
was built. Though he had andirons to help with his fire, even then to
Lay the Fire
in the immense fireplace required some skill. Cut two andirons of
cardboard (Fig. 215), bend at dotted lines, paint black, and the
andirons will stand alone and look like real ones (Fig. 216).
[Illustration: Fig. 216.--The andiron.]
[Illustration: Fig. 217.--The flames.]
Cut from red, orange, yellow, and black tissue-paper flames like Fig.
217; bend at dotted line and paste the mingled flames one at a time and
turned in varying directions on a piece of cardboard made to fit the
bottom of the fireplace. Adjust the little black andirons to the fire
and glue them in place; select a large log for the "back-log," and a
more slender one to lay across the front of the andirons. Place smaller
wood in between with the flames, and scatter a few bits of black paper
on the hearth underneath to appear like fallen charred wood. When
finished the fire should look as if it were actually sparkling, roaring,
and blazing (Fig. 218).
[Illustration: Fig. 218.--The flames leap up the chimney.]
[Illustration: Fig. 219.--Cut the shell in half.]
Your fire is ready, so you must hurry and get the
Great Iron Pot
to hang over the flames. Break an egg in halves as indicated by dotted
lines in Fig. 219; even off the edge of the larger half shell with a
pair of scissors, paste a strip of tissue-paper over the edge and glue
on a stiff paper handle (Fig. 220). Cut three pieces of heavy, stiff
paper like Fig. 221, bend at dotted line and pinch the two lower corners
on part T together to form the pot legs (Fig. 222). Turn the egg-shell
upside down and fasten the legs on by gluing the flap U (Fig. 221) on
the bottom of the shell; the legs should enable the pot to stand
upright. Turn the egg-shell into iron by painting the handle and outside
of the pot jet black (Fig. 223). Swing the crane forward, hang on the
pot, pretend you have something to cook in it, then move the crane back
over the fire.
[Illustration: Fig. 220.--A strip of paper for the handle.]
[Illustration: Fig. 221.--Cut the pot leg like this.]
[Illustration: Fig. 222.--Bend the pot leg like this.]
[Illustration: Fig. 223.--Paint the pot black.]
Remember all the time you are playing, that this is the way your
colonial ancestors cooked.
In days of long ago, they had many other
Odd Utensils
One of the easiest for you to make is the long-handled iron shovel
called a "peel" (Fig. 224), used to place bread and pie in the great
oven. Cut the peel from stiff cardboard, paint it black and stand it up
by the side of the chimney (Fig. 204). Trace the toaster (Fig. 225) on
cardboard, paint it black, bend up the four semicircular rings and bend
down the two feet, one on each side (Fig. 226).
[Illustration: Fig. 224.--A queer shovel called the "peel."]
[Illustration: Fig. 225.--Make the toaster by this pattern.]
Chicken and other eatables were placed between the front and back rings
on the toaster and broiled before the fire, which was so hot that it
was necessary to have long handles on all cooking utensils.
[Illustration: Fig. 226.--The toaster.]
[Illustration: Fig. 227.--Make a pot-hook like this.]
Several pieces of iron of varying lengths, generally made into the shape
of the letter S, were called "pot-hooks"; they hung on the crane. Make
two or three pot-hooks of cardboard and paint them black (Fig. 227).
When you are not using the little toaster, bend up the handle and hang
it on a pin stuck in the wall (Fig. 204).
[Illustration: Fig. 228.--The spinning-wheel and jointed doll
spinning.]
[Illustration: Fig. 229.--Spokes.]
Just look at your little colonial friend, Thankful Parker! (Fig. 228).
The tiny maid seems almost to be stepping lightly forward and backward
as she spins out long threads of the soft, warm yarn, singing softly all
the while a little old-fashioned song. How busily she works, and listen!
you can all but hear the wheel's cheery hum, hum, hum! That's the way
the real colonial dames used to spin. Such a
Spinning-Wheel
belonged to every family, for all had to do their own spinning or go
without the yarn, as they could obtain no assistance from others.
[Illustration: Fig. 231.--Small wheel.]
[Illustration: Fig. 232.--Stand.]
[Illustration: Fig. 233.--Wheel brace.]
Cut from cardboard the spokes (Fig. 229) for your miniature colonial
spinning-wheel, the tire (Fig. 230), and the two small wheels (Fig.
231). Bend forward the fan-shaped ends of each spoke (Fig. 229) and glue
the tire (Fig. 230) around on them; let one edge of tire lie flush on
the edges of the bent ends of the spokes.
[Illustration: Fig. 230.--Tire of wheel.]
With the exception of the square spaces AA and BB on the stand (Fig.
232) cut the heavy lines and the little holes; score, then bend the
dotted lines. Bend down the long sides and the ends fitting the corners
against and on the inside of the same letters on the sides, glue these
in place and you have a long, narrow box with two extensions on one side
(HH and GG). Bend these extensions, also their ends II and JJ, and glue
the ends on the inside of the opposite side of the box against the
places marked II and JJ.
Turn the box over, bringing the level smooth side uppermost. Cut out the
wheel brace (Fig. 233), turn it over on the other side, then bend AA
backward and BB forward, and glue the brace on the box-like stand (Fig.
232) on the squares AA and BB. See Fig. 228.
[Illustration: Fig. 234.--Upright.]
Make the upright (Fig. 234) of wood; shave both sides of the end, KK,
until it is flat and thin, then glue a small wheel (Fig. 231) on each
side, raising the wheels above the wood that the flat end of the
upright may reach only to their centres. Glue the wheels together to
within a short distance of their edges.
With the red-hot end of a hat-pin bore the hole LL through the front of
the upright, and below bore another hole, MM, through the side. Make the
screw (Fig. 238) and the block (Fig. 239) of wood. Run the screw through
the side hole MM in the upright (Fig. 234), and push the screw on
through the hole in the top of the block (Fig. 239). Break off more than
half of a wooden toothpick for the spindle (Fig. 236) and pass it
through the hole LL (Fig. 234).
[Illustration: Fig. 235.--Hub.]
Make the hub (Fig. 235) of wood and thread it in through the wheel and
brace (Fig. 233), to hold the wheel in place. Use two wooden toothpicks,
with the ends broken off (Fig. 237), for legs; insert these slantingly
into the holes, GG (Fig. 232), on the under part of the stand, allowing
the top ends to reach up and rest against the under side of the top of
the stand. Spread out the bottom ends of the legs.
[Illustration: Fig. 236.--Spindle.]
[Illustration: Fig. 237.--Leg.]
[Illustration: Fig. 238.--Screw.]
[Illustration: Fig. 239.--Block.]
Run the upright (Fig. 234) through the single hole near one end of the
stand (Fig. 232) and pass it down through the under hole on HH. The
lower part of the upright forms the third leg. See that all three legs
set evenly when the wheel stands, and that the box part is raised
slightly higher at the upright end, slanting downward toward the other
end (Fig. 228). Glue the three legs firmly in place.
Connect the two small wheels (Fig. 231) and the large wheel together by
passing a string between the small wheels and over around the outside of
the tire of the large wheel, fastening it on here and there with a
little glue (Fig. 228). Twist a piece of raw cotton on the spindle and
tie a length of white darning-cotton to the end of the cotton (Fig.
228).
[Illustration: Fig. 241.--Hair-pin.]
[Illustration: Fig. 240.--Do her hair up in this fashion.]
Stretch the thread across to the hand of your colonial-dressed doll,
glue it in place, and the next time your mother attends a meeting of the
Society of Colonial Dames tell her to show your little maid Thankful
Parker and her spinning-wheel. When you
Dress the Doll
coil her hair up on top of her head (Fig. 240) and fasten it in place
with common pins (Fig. 241). Make the straight bang look as nearly as
possible as though the hair were drawn up into a Pompadour such as was
worn in Colonial times.
[Illustration: Fig. 242.--Pattern of cap.]
[Illustration: Fig. 243.--The cap.]
[Illustration: Fig. 244.--Cap band.]
[Illustration: Fig. 245.--Pattern of kerchief.]
Make the cap (Fig. 243) of thin white material cut like Fig. 242, and
the band (Fig. 244) of the same color as the dress. Cut the thin white
kerchief like Fig. 245, and fold it as in Fig. 246. Fig. 247 gives the
design for the dress waist, and Fig. 248 the sleeve. The skirt is a
straight piece gathered into a waistband. The apron (Fig. 249) is white.
When the doll is dressed it should resemble little Thankful Parker (Fig.
228). An
Old-Fashioned Flintlock Rifle
with its long, slender barrel was used almost daily by our forefathers
for securing game as food.
[Illustration: Fig. 246.--Fold the kerchief like this.]
[Illustration: Fig. 247.--Pattern of waist.]
[Illustration: Fig. 248.--Pattern of sleeve.]
[Illustration: Fig. 249.--The apron.]
The gun was kept hanging in plain sight over the kitchen mantel-piece,
ready for defence at a moment's notice, for in those early days wolves
and other wild animals were numerous and dangerous, and enemies were
also likely to appear at any time.
[Illustration: Fig. 250.--Lock and band of tinfoil.]
[Illustration: Fig. 251.--Make this part of pasteboard.]
You should have one of those queer old guns to adorn your kitchen wall.
Get some heavy tinfoil off the top of a bottle, or take a collapsible
tube and from it cut a wide strip like Fig. 250, one narrow, straight
strip and two medium-wide straight strips, four in all. Cut the butt end
of the gun (Fig. 251) of stiff cardboard. Break a piece measuring four
and one-half inches from a common coarse steel knitting-needle for your
gun-barrel and use a slender, round stick, or the small holder of a
draughtsman's pen, cutting it a trifle more than three and one-half
inches in length for the ramrod groove.
[Illustration: Fig. 252.--A pin for a ramrod.]
[Illustration: Fig. 253.--Slide the paper end in the wood like this.]
In the centre of one end of the stick bore a deep hole with the red-hot
point of a hat-pin and insert the pointed end of an ordinary pin for a
ramrod (Fig. 252). Split the other end of the stick up through the
centre not quite half an inch and work the butt end of the gun in the
opening (Fig. 253).
[Illustration: Fig. 254.--Ready for the tinfoil bands.]
Lay the gun-barrel above the wooden part (Fig. 254) and fasten the two
together with the four bands of tinfoil (Fig. 255), allowing the top
part of Fig. 250 to stand up free to represent the flintlock. We must be
content without a trigger unless you can manage to make one by bending
down and cutting a part of Fig. 250. Paint the butt and wooden portion
of the gun brown before binding on the barrel, and you will find that
you have made a very real-looking little rifle to hang upon the rustic
brackets over the mantel-piece.
[Illustration: Fig. 255.--Colonial flintlock made of knitting-needle and
small pen-holder.]
When the fire in your big kitchen fireplace needs brightening, use the
Little Bellows
to send fresh air circulating through the smouldering embers. The
bellows are easy to make. Cut two pieces of pasteboard like Fig. 256,
and cut two short strips of thin paper. Paste one edge of each strip to
each side of one piece of cardboard bellows, fold the strips across the
centre (Fig. 256), and attach the free ends of the folded strips to the
other piece of pasteboard bellows, forming a hinge-like connection on
each side between the two pasteboard sides. Paste the points of the two
sides together up as far as the dotted line (Fig. 256). When thoroughly
dry you can work the bellows by bringing the handles together and
opening them as you would real bellows (Fig. 257).
[Illustration: Fig. 257.--The finished bellows.]
[Illustration: Fig. 256.--Cut the bellows by this pattern.]
Heavy tinfoil must furnish material for your
Pewter Ware;
much of it has the same dull, leaden color and the peculiar look of old
pewter. Should the pieces of tinfoil you find be twisted and uneven, lay
them on a table and smooth out the creases with scissors or the dull
edge of a knife-blade; then cut out round, flat pieces and holding one
at a time in the palm of your left hand, round up the edges by rolling
the ball of a hat-pin around and around the plate; press rather hard and
soon the edges will begin to crinkle and turn upward (Fig. 258). You may
mould some deeper than others and have a row of different-sized pewter
plates on the kitchen mantel-piece, and you can make a wee pie in the
deepest plate, open the oven-door and shove the pastry into the oven
with the little iron peel. Try it.
[Illustration: Fig. 258.--Colonial pewter dish made of tinfoil.]
[Illustration: Fig. 259.--The warp.]
The colonial kitchen would be incomplete without a bright,
Home-like Rag Rug
to place over the bare board floor, and it will be fun for you to weave
it. Take a piece of smooth brown wrapping-paper the size you want your
mat, fold it crosswise through the centre and cut across the fold (Fig.
259), making a fringe of double pieces which we will call the warp.
Unfold the paper and weave various colored tissue-strips in and out
through the brown foundations (Fig. 260), until the paper warp is all
filled in with pretty, bright colors. You can weave the rug "hit or
miss" or in stripes wide or narrow as you choose, only make the rugs as
pretty as possible.
[Illustration: Fig. 260.--Weave the rug in this way.]
Now we must manufacture a fine
Old Colonial Clock
[Illustration: Fig. 261.--Colonial clock with movable weights.]
[Illustration: Fig. 262.--The clock is cut in one piece.]
(Fig. 261). It would never do to forget the clock, for poor little
Thankful would not know how long her many loaves of bread were baking in
the big oven, and the bread might burn. Cut Fig. 262 of cardboard and
score all dotted lines, except NN-OO, which forms the hinge of the door.
Mark this with a pinhole at top and bottom, turn the cardboard over and
draw a line from pinhole to pinhole; then score it on this line that the
door may open properly outward. Try to draw the face of the clock
correctly. Make it in pencil first so that any mistake may be erased and
corrected. When you have the face drawn as it should be, go over the
pencil lines with pen and ink. Begin the face with a circle (Fig. 263).
Make it as you made the circle for the wigwam, only, of course, very
much smaller. Above the circle, at the distance of half the diameter of
the circle, draw a curve with your home-made compass (Fig. 264).
Lengthen the compass a little and make another curve a trifle above the
first (Fig. 265). Connect the lower curve with the circle by two
straight lines (Fig. 266), draw a small circle above the large one (Fig.
267), connect the two circles by two scallops (Fig. 268), and bring the
upper curve down into a square (Fig. 269). The small top circle stands
for the moon; draw a simple face on it like Fig. 270, then make the
numbers on the large circle (Fig. 271) and also the hands (Fig. 272).
Both numbers and hands must be on the same circle on the clock. They are
on two different circles in the diagrams that you may see exactly how to
draw them.
[Illustration: Fig. 263.--Draw the circle.]
[Illustration: Fig. 264.--Then a curve above the circle.]
[Illustration: Fig. 265.--Another curve above the first one.]
[Illustration: Fig. 266.--Connect the lower curve with the circle by two
lines.]
Leave Fig. 269 white, but paint the other portions of the clock a light
reddish brown with black lines above and below the door, and a black
band almost entirely across the bottom edge of the front of the clock
that the clock may appear to be standing on feet. Gild the three points
on the top to make them look as if made of brass.
Be sure that the four holes in the top (Fig. 262) are fully large enough
to allow a coarse darning-needle to be passed readily through them; then
bend the clock into shape, fitting the extension PP over the extension
QQ; the two holes in PP must lie exactly over those in QQ. Glue the
clock together, using the blunt end of a lead-pencil, or any kind of a
stick, to assist in holding the sides and tops together until the glue
is perfectly dry.
[Illustration: Fig. 267.--Draw a small circle above the large one.]
[Illustration: Fig. 268.--Connect the two circles by two scallops.]
[Illustration: Fig. 269.--Extend line of upper circle down to form a
square.]
[Illustration: Fig. 270.--Make this face in the small circle.]
[Illustration: Fig. 271.--Put the numbers on the clock face in this
way.]
[Illustration: Fig. 272.--Make the hands of the clock like these.]
Thread a piece of heavy black darning-cotton in the largest-sized long
darning-needle you can find; on one end of the thread mould a
cylinder-shaped piece of beeswax, cover it with thin tinfoil, then open
the clock-door and hold the clock with its head bent outward and
downward from you. Look through the open door and see the holes on the
inside of the top; run your needle through one of these holes and
across the top on the outside, bringing it down through the other hole
into the clock. Slip the needle off the thread and mould another piece
of beeswax on the free end of the thread, make it the same size and
shape as the first weight, cover this also with tinfoil and you will
have clock-weights (Fig. 273) for winding up the old-fashioned
timepiece. Gently pull down one weight and the other will go up, just as
your colonial forefathers wound their clocks. When the weight is pulled
down in the real clock it winds up the machinery, and the clock
continues its tick, tack, tick, like the ancient timepiece Longfellow
tells us of, stationed in the hall of the old-fashioned country-seat.
[Illustration: Fig. 273.--Weights for winding the clock.]
[Illustration: Fig. 274.--Pattern of the churn.]
[Illustration: Fig. 275.--The churn.]
Do you like real country buttermilk, and have you ever helped churn? If
you live in the city or for some other reason are not able to make the
butter, you can still enjoy manufacturing a little
Colonial Churn
that will look capable of producing the best sweet country butter (Fig.
275).
[Illustration: Fig. 276--Cork lid to the churn.]
[Illustration: Fig. 278.--Dasher.]
[Illustration: Fig. 279.--Push the end of the handle through the
dasher.]
[Illustration: Fig. 280.--Cut end of handle pasted on the dasher.]
[Illustration: Fig. 277.--Handle of the dasher.]
[Illustration: Fig. 281.--Put the handle of the dasher through the lid.]
Cut Fig. 274 of heavy paper or light-weight cardboard; mark three bands
on it (Fig. 275). Make your churn much larger than pattern, have it deep
enough to stand as high as Fig. 275. Glue the sides together along the
dotted lines, turn up the circular bottom and glue the extensions up
around the bottom of the churn. Fit a cork in the top for the churn-lid
and make a hole through the centre of the cork for the handle of the
dasher (Fig. 276). Make the handle by rolling up a strip of paper as you
would roll a paper lighter. Glue the loose top end of the handle on its
roll; then cut the large end of the handle up a short distance through
its centre (Fig. 277). Cut the dasher (Fig. 278) from cardboard, slide
it over the divided end of handle (Fig. 279), bend the two halves of the
handle-end in opposite directions, and glue them on the dasher as shown
in Fig. 280. Slip the handle of dasher through the cork lid (Fig. 281),
and fit the lid in the churn (Fig. 275). Paint the churn and handle of
dasher a light-yellow-brown wood color, the bands black, and when dry
you can work the dasher up and down the same as if the churn were a real
one. Stand the churn in your kitchen not far from the fire so that
little Thankful may attend to the cooking while she is churning.
CHAPTER XIV
LITTLE PAPER HOUSES OF JAPAN
FRAGILE, quaint and full of sunshine and color are the typical houses of
Japan. They are so simple in construction a child might almost build
them, generally only one story in height and always without a cellar,
chimneys, fireplaces, windows, and even without a door. Yet the dainty
abodes are flooded with light and fresh air. How is it managed? Simply
by sliding the entire front of the house to one side, leaving the
building wide open. Often the back walls, too, are opened, and in some
houses the sides also. These cottages are usually part wood and part
paper. It seems strange to think of people actually living in paper
dwellings, but the Japanese understand how to manufacture strong,
durable paper. They delight in making all sorts of paper, from the
tough, well-nigh indestructible kind to the delicate, filmy variety, and
it is adapted to innumerable uses. In Japan people not only build paper
walls, but the very poor wear paper clothing.
We will make our
Japanese House
entirely of paper (Fig. 282). Take medium-weight water-color paper, or
any kind that is stiff enough and not too brittle, cut a piece sixteen
inches long and seventeen inches wide and on it mark the plan of the
large room (Fig. 283). This should measure sixteen inches across the
back from A to A, seventeen inches along the side from A to B, and
thirteen inches across the front from B to C. The back division forms
the foliage and the back of the room, the centre division the roof, and
the front division the front and sides of the room.
[Illustration: Fig. 282.--The little paper house.]
[Illustration: Fig. 283.--Plan of large room.]
No paste is used in making the building; the design is merely cut out,
bent into shape, and fastened together with projecting tongues run
through slits. Cut all the heavy lines, lightly score, then bend all the
dotted lines, except the two immediately across the front of the room at
top and bottom. This front is five inches wide and four and a half
inches high, with two openings in it and a portion extending down in
front to form the little porch. Make a pinhole at each end of the two
lines forming top and bottom of the front of the room A and B, then turn
the paper over and draw a top line and a bottom line across on the wrong
side of the paper from pin-point to pin-point. Score these on the wrong
side of the paper, for they must bend from that side in order to extend
inward from the right side to form the projection of the roof and the
top landing of the veranda. Fasten the room together, then cut out the
floor (Fig. 284), slide it in place and also the steps (Fig. 285),
marking straight lines across the diagram to indicate steps.
[Illustration: Fig. 284.--Floor of large room.]
Build the small room (Fig. 286) in the same way that you made the large
one. Cut it from a piece of paper nine and one-half inches wide and
thirteen and one-half inches long. This room has no floor. When finished
run the tongues extending out on the back of the room through the
remaining four slits at the side of the foliage on the back of the large
room (Fig. 283). Work carefully and you will be fully repaid.
[Illustration: Fig. 285.--The steps.]
Paint the roof of each room in little black squares with white markings
between to represent black tiling. Paint the outside of the house
yellow, the back wall of the large room pale blue, the floor light
brown. Paint the back of the small room mottled green and pink. Make a
band of light blue edged with black across the outside top of the front
opening and a red band across the bottom. Let the projecting veranda be
yellow, with vines across the lower part. Edge the openings of the large
room with two narrow bands, one purple the other black, and mark black
lines from side to side crossed with lines running from top to bottom
to form a lattice-like work on the side of the smaller opening (Fig.
282).
[Illustration: Fig. 286.--Plan of small room.]
The sides of the house are supposed to be formed of paper-covered
screens which slide in grooves and may be removed entirely when
desired. The interior of a real Japanese house is divided into rooms
merely by the use of sliding paper screens, and the entire floor may
readily be thrown into one large apartment, there being no solid
partitions as in our houses. Cut out flat round paper lanterns, paint
them with the gayest of colors and make the small top and bottom bands
black; then with needle and thread fasten the lanterns along the top
front of the large opening of the small room (Fig. 282).
You need not be concerned in the least about furnishing the little
house: it does not need any furniture, for the Japanese have no stoves,
chairs, tables, knives or forks, carpets, bedsteads, washstands,
bookcases, desks, framed pictures, nor any comforts like ours.
The Floors
are covered with clean, thick, soft matting rugs and are just the place
for girls and boys to play, and have a good time running about in their
stocking feet, for in Japan people always take off their shoes before
entering a house and everyone goes either stocking-footed or barefooted
when indoors, so the floor-mats are kept free from dust.
Of course, men, women, and children all sit on the floor; and when
Breakfast is Ready
the floor is set instead of a table, and each person receives his own
little lacquer tray placed on the floor, or on a low wooden stool, with
the individual portion of rice in a delicate china bowl, pale tea in
dainty teacups and shredded or diced raw fish in china a queen might
envy. On the tray are also a pair of ivory chopsticks, which even a
little child can manage skilfully, in place of the spoon, knife, or
fork that our girls or boys would use. The Japanese do not have bread,
butter, milk, or coffee, and never any meat, but they cultivate a
mammoth radish which is cut up, pickled and eaten with relish. For
dinner they take pale tea, rice, and fish, and for supper fish, pale
tea, and rice. Often the fish is cooked, sweetmeats are served and
pickled radish also, but frequently the breakfast consists of merely a
bowl of cold rice. These unique people do not seem to think or care much
about their food; many times they deny themselves a meal that they may
spend the money on a feast of flowers in some garden where they can
enjoy gazing upon masses of exquisite cherry blossoms, chrysanthemums,
or other flowers. No nation in the world loves flowers more than the
Japanese, and none can rival them in the beautiful arrangement of their
blossoms.
When night comes the natives
Never Go to Bed,
for there are no beds. Soft silk or cotton comforts are brought to each
person, and the people roll themselves up in the comforts and sleep any
place they wish on the floor, using little wooden or lacquer benches for
pillows; usually these have a roll of soft paper on the top, making them
a little more comfortable. Take a comfort and try sleeping on the floor
with some books under your head and you will know how it feels to sleep
in Japanese style.
Every Japanese house should have its
Fenced-in Garden.
Make your fence of paper cut according to Fig. 287, and mark the pattern
(Fig. 288) on it with two tones of yellow paint. Paint the convex top of
the gate-way a bright red with narrow black border, and mark the white
gate-posts with black Japanese lettering like Fig. 289. Paint the
remaining portions of the gate-way yellow, the edges black. Fig. 282
will help you to grasp the idea of the fence and gate-way. The names of
the streets are not on the corners as in our cities, so a panel of white
wood is nailed to the gate-posts with both the name of the street and
householder on it, and often a charm sign is added.
[Illustration: Fig. 287.--Fence and gate-way.]
[Illustration: Fig. 288.--Draw this pattern on the fence.]
Put up the fence by slipping the upper tongues on each end through the
slit on the outside front edge of each room, then sliding the lower
tongues of the fence through the lower outside edges of rooms and
porches (Fig. 282).
[Illustration: Fig. 289.--Signs for gate-posts.]
Both boys and girls have fine times in Japan, and they are as happy as
the day is long. On the fifth day of the fifth month the boys reign
supreme, and their relatives and friends vie with each other in their
endeavors to render the day a happy one for the little fellows. All
Japan is alive and anxious to celebrate the occasion. Quaint flags in
the shape of enormous fish swim in the air and float over the towns,
forming bright masses of color. Every home that is blessed with one or
more boys displays a fish banner for each son, the younger the child the
larger the fish, and the proudest house is the one that can boast of the
greatest number of fish flying from its bamboo pole. Every Japanese
boy's birthday is celebrated on this day with great rejoicing, no matter
at what time of the year he was born.
[Illustration: Fig. 290.--Upper half of koi.]
[Illustration: Fig. 291.--Under half of koi.]
[Illustration: Fig. 292.--The koi--emblem of undaunted determination.]
[Illustration: Fig. 293.--Boy's birthday pole.]
Make
Several Fish
for the pole to be placed in front of the little paper house; they look
very comical, bobbing and swinging high in air with their wide-open
mouths. Cut Fig. 290 of white tissue-paper, also Fig. 291, which is a
trifle larger than the first and is slashed along three edges. Lay Fig.
290 on top of Fig. 291; bend the flaps over and paste them on Fig. 290.
Form a little hoop of a strip of stiff paper with the ends pasted
together; blow the fish open, then paste the hoop on the inside of the
open edge of the head to form its immense mouth. When dry mark the fish
with red paint like Fig. 292. Tie a thread on the two opposite sides of
the mouth and with another thread attach the loop to a slender stick on
the end of which you have fastened a gold disk made of two pieces of
gilt paper. This is intended to represent the rice ball with which the
real fish are fed. The fish banners are hollow so that the wind may fill
them, causing the fish to rise and fall as the breeze comes and goes.
Push the end of your fish-pole through the centre of a small box-lid or
button mould (Fig. 293) and stand the decoration outside the gate-way of
the little house. The fish used on this eventful day are the famous
carp, which the natives call _koi_, the unconquerable. The Japanese carp
stands for good cheer, indomitable will, perseverance and fortitude, and
it is used to impress these virtues upon the boys, but all the good
qualities named are fully as necessary for girls even though the
Japanese do not mention the fact, but girls are not forgotten. The
nation gives them the third day of the third month for their festival.
It is called the
"Feast of Dolls,"
and is a gala day for little girls. Dolls and gorgeously dressed images,
representing the Mikado, nobles, and ladies, are brought out and placed
on exhibition, along with beautiful jars containing queer little trees
and rare vases filled with flowers. The day is made a joyous one and a
day long to be remembered by the little girls.
[Illustration: Fig. 294. Pattern of kago.]
There are no sidewalks in Japan, the pavements being laid lengthwise
through the centre of the streets, and on this path people stroll or
hurry along. Mingled with the others are the Japanese laboring men,
called coolies, carrying between them
The Kago,
which swings from a pole the ends of which rest on the men's shoulders.
The _kago_ is a sort of canopied hammock chair. You can easily fashion a
tiny one from paper and straw. Cut Fig. 294 of stiff paper, make it
three inches long and at the broadest part an inch and a quarter wide.
Paint the _kago_ yellow, and to form the framework sew on each end a
piece of heavy broom straw, jointed grass, or straw which has been
limbered by soaking, and cut a piece six and three-quarter inches long
for each side. Bring the side straws together beyond each end and bind
them (Fig. 295). Then hunt up a slender round stick six inches long and
sew the _kago_ on it by means of thread loops at each end (Fig. 296).
Make the canopy of a piece of stiff paper three and one-half inches long
and two and one-quarter inches wide, paint it yellow, and with stitches
only at each end sew it firmly on the pole over the seat of the _kago_
(Fig. 297).
[Illustration: Fig. 295.--Bind the edges of the kago with grass or straw
like this to make the frame.]
[Illustration: Fig. 296.--Tie the kago to the pole.]
[Illustration: Fig. 297.--Sew the top on over the pole.]
[Illustration: Fig. 298.--The little lady rides in her kago.]
Either buy a little
Japanese Umbrella
or make one of a disk of green tissue-paper folded and crimped from
centre to edge. Use a heavy broom straw for the handle and lighter ones
for the ribs; stick them in, gluing them only to the centre, which is
now the top of the umbrella; wind the top of the umbrella, the ribs, and
the handle firmly together with black thread. The umbrella will not open
but looks well closed. Place a tied bundle of red tissue-paper and the
green umbrella on top of the yellow _kago_ and fasten them securely in
place with black thread (Fig. 298). Fold a piece of soft,
lavender-colored material on the seat of the _kago_ as a comfort for the
doll to sit on; then fit in a little Japanese doll or any kind of doll
dressed and painted to resemble a little Jap. The doll's head should
reach up, or almost up, to the canopy. Pull part of the comfort over the
doll and fasten her snugly up in a sitting position. Make a gay paper
fan and attach it to one of the doll's hands, and the little lady will
be ready to go on her journey.
CHAPTER XV
SOME ODD THINGS IN RUSSIA
IN his own country the Czar is almost worshipped by the people, and when
his coronation takes place, crowds of loyal Russians flock to Moscow,
the former in hopes of obtaining a glimpse of their beloved ruler, or at
least of seeing portions of the grand procession, the beautiful
decorations and the gay festivities which always form part of the
jubilant occasion.
For centuries the great white Czars have been crowned in the
Cathedral of the Assumption,
which, though not large, is magnificent, and is the most important
building in all Russia. The structure stands, surrounded by many other
sacred edifices, in an enclosure known as the Kremlin, situated in the
centre of the city of Moscow. Its white walls support a vaulted roof of
soft, dull green crowned with golden cupolas, each cupola surmounted by
a shining golden cross. The interior is resplendent almost beyond
description with its rich coloring, its jewel-framed paintings, its
sculptures, its gold, silver, and precious stones, its priceless robes
and holy relics.
[Illustration: Fig. 299.--Miniature Cathedral of the Assumption.]
To give a true conception of the wonderful interior of the sacred
cathedral to one who has never seen it, is impossible, but we can gain
an idea of the general appearance of the exterior by making a miniature
Cathedral of the Assumption (Fig. 299). Find, or make, a firm white
pasteboard box seven inches long, five and one-quarter inches wide, and
four and one-half inches high; this is for the body of the building.
Fold a strip of paper seven inches in length, crosswise, through the
centre, and bring the ends together, making another fold crosswise
through the centre of the doubled strip, which will give four layers of
paper of equal length. Cut this into a scallop three-quarters of an inch
deep, open out the strip and you will have four scallops, each one and
three-quarters inch wide, at its base. Lay the strip in turn along each
of the top edges of the sides of the box, and mark the box around the
edges of the scallops, drawing four scallops on the two long sides of
the box, and three on each of the short sides. Cut out the scallops on
top of the box; then take the cover of the box, which must form the roof
of the structure, and remove the bent-down sides; trim off with scissors
the extreme edge of one long side and one short side, until the cover
forms a tight fit in the top of the box, but may, with gentle pressure,
be made to slide down one inch. Fasten the roof in place at each corner
by running a strong pin from the outside wall through into the roof,
until the pin is embedded its full length in the roof.
[Illustration: Fig. 300.--The Door-way.]
[Illustration: Fig. 301. The door.]
[Illustration: Fig. 302.--Door window.]
[Illustration: Fig. 303.--Upper window.]
[Illustration: Fig. 304.--Lower front windows.]
[Illustration: Fig. 305.--Lower side windows]
Now cut the
Door-way
(Fig. 300) of light reddish-brown paper; make it three inches high and
one and one-half inch wide. Let the door proper (Fig. 301) be of inked
paper an inch and a half high by an inch and a quarter wide, the
door-window (Fig. 302) one inch and a quarter high by three-quarters of
an inch wide. Cut the upper row of windows like Fig. 303 and the lower
front windows according to Fig. 304. Make the lower side windows double
(Fig. 305). The door-arch (Fig. 306) must be a trifle over two and
one-quarter inches long. Curve the arch by drawing it across a blade of
the scissors, paint it green on both sides, bend down the slashed
portion, and paste the arch over the door-way, as in Fig. 299.
[Illustration: Fig. 306.--The door-arch.]
[Illustration: Fig. 307.--The paper cross.]
[Illustration: Fig. 308.--A cross on the top of each cupola.]
Make five
Cupolas
of white writing-paper. For each cupola, cut a piece of paper five
inches long. Let the first be three inches wide and the remaining four
two and one-quarter inches wide; slash up the bottom edge of each cupola
one-quarter of an inch; then half an inch below the top edge of each
cupola paste a row of narrow, three-quarter-inch high windows cut from
inked paper (Fig. 303). When the windows are on, paste the two ends of
each cupola together, lapping them one-quarter of an inch. Bend out the
lower slashed edge and glue the highest cupola on top of the centre of
the roof; fasten the other four on the roof near the corners and at
equal distances from the centre (Fig. 299). Have ready five half
egg-shells and glue one on the top of each cupola. Then cut five paper
crosses (Fig. 307), each measuring about two inches in height,
including the lower slashed portion. Fasten a cross on top of each
egg-shell (Fig. 308). Gild all the crosses and shells, bringing the gilt
down into a narrow band on the paper below the shells. On the edge of
each shell paste a narrow black-painted paper strip (Fig. 309),
adjusting it so that the gilt on the white paper will show below the
points.
[Illustration: Fig. 309.--A narrow black strip.]
To Make the Roof
fasten a five-eighths-inch wide strip of paper along and over the
scalloped top edge of the four sides of the building, using strong paste
or glue for the purpose (Fig. 310); be sure that the strip is on even
and firm; then let it dry. Paint the entire flat roof and flat top
surface of the scallops green, using the same paint selected for the
door-arch. Oil paint is best. Be careful not to spatter green on the
white and gold cupolas.
[Illustration: Fig. 310.--Fasten a strip of paper along the edge.]
When finished, place your little cathedral up high on a level with your
eyes, turn it until you have the view which is given in Fig. 299, and
you can very easily imagine just how the real Cathedral of the
Assumption appears.
Thousands of girls, boys, and grown-up men and women in freezing, snowy
Russia,
Sleep On Their Stoves
every night during the long winter months. How strange it would seem to
be away up on top of a great warm stove, built of brick and nearly as
high as the ceiling! The Russians do not bother about making the bed, or
rather the stove, for they have no sheets, blankets, or bedspreads. When
it is time to retire, the inmates climb up on top of the great
whitewashed stove and sleep just as they are, in the clothing they wear
during the day.
[Illustration: Fig. 311.--Dress a doll like a Russian.]
[Illustration: Fig. 312.--Half of cap.]
If you would know how the average Russian looks,
Dress a Doll Like a Russian
(Fig. 311). Cut two halves of a muslin cap (Fig. 312) and sew them
together (Fig. 313). Sew in strands of tan-colored darning cotton on a
line around the cap, midway from top and bottom (A-B, Fig. 312), and
also sew a line of tan-colored strands on each side of the middle
stitching of the white cap, until the lower fringe is reached. Fig. 314
shows the fringe of hair partially sewed on the cap. Glue this cap on
the doll's head, smooth down the hair and cut it off straight around,
making the hair a trifle shorter at the back than the front.
[Illustration: Fig. 313.--The cap.]
[Illustration: Fig. 314.--The fringe of hair partially sewed on.]
Cut another piece of cloth (Fig. 315), and sew in a fringe of the
tan-colored cotton (Fig. 316); glue this on the doll to form the beard,
and trim off the edges. Paint the moustache on the face, making it the
color of the hair. Russians, as a rule, are blonds, having either red or
lighter-colored hair.
[Illustration: Fig. 315.--Another piece of cloth.]
[Illustration: Fig. 316.--The beard.]
Make the trousers loose and bind them to the doll below the knees. The
Russian leather boots which the natives wear always reach up over the
trousers, and you can make such boots by painting the doll's feet black
and sewing straight pieces of black material on the doll for boot-legs,
allowing the cloth to be long enough to wrinkle around the ankle.
Try to make the boots appear as if laced up the front, for many wear
them so in Russia. The blouse should be loose and belted in at the
waist, hanging straight and square around the bottom. In case your doll
has real hair, omit the wig and cut the real hair in Russian style.
These people never use their immense stove for heating a teakettle,
though they drink tea upon all occasions. To make tea they resort to a
samovar, which is a curious brass or copper vessel, shaped something
like an urn. When the tea is ready, it is poured into tall glasses, a
slice of lemon is put in each glass, and the tea drunk scalding hot. The
beverage is called _chai_, and the Russians enjoy it so much that they
often take twenty glasses in succession. When one desires sugar, it is
not put in the tea, but held in one hand, and a portion bitten off from
time to time between the swallows of tea.
[Illustration: Fig. 317.--A little Russian samovar.]
If you will empty an egg-shell of its contents and get a sheet of white
writing-paper, a small square box, a piece of yellow sealing-wax, some
liquid gilt, and five gilt beads, four about the size of large peas, and
the fifth a trifle larger, we can manufacture
A Little Russian Samovar
like Fig. 317. Should you have no box, make one of pasteboard one inch
square and half an inch high; if you cannot get the beads, use small,
round buttons. The four beads or buttons are feet for the samovar.
Fasten one on each corner of the bottom of the box with sealing-wax,
then glue the broken centre of the large end of the egg-shell on the
middle of the top of the box. Cut the handles from paper according to
Fig. 318, making each handle one inch and a half long and half an inch
wide. Run the half of one handle over the edge of a blade of the
scissors; this will cause the paper to curl. Turn the handle over and
curl the other half in the opposite direction; bend the handle at the
dotted line, one-quarter of an inch from the lower edge, and paste it on
one side of the samovar, midway between top and bottom. Make the other
handle in the same way, and fasten it on the opposite side.
[Illustration: Fig. 318. The handle.]
[Illustration: Fig. 319.--The faucet.]
[Illustration: Fig. 320.--The different parts of the samovar.]
Cut the faucet (Fig. 319) of paper one inch wide; roll the paper up from
the bottom, bringing the handle on top; bend the handle straight up,
and bend the spout down in front of the handle. Glue the other end of
the faucet to the front of the samovar with sealing-wax, placing it near
the bottom, half-way between the two handles.
Make the top chimney of a roll of paper a generous inch in width. Paste
the loose edge of the paper down on the roll, and pierce a hole in the
roll one-quarter inch from the bottom, making it large enough to admit
the end of a match. Glue a burned match in this hole, allowing the main
part to extend out one-quarter of an inch from the chimney. Fasten a
small, round, flat button on the end, and attach a round paper disk
three-quarters of an inch in diameter to the top of the chimney,
crowning the disk with the large bead.
Fig. 320 gives all the different parts of the samovar and shows as
nearly as possible how they should be put together. When the samovar is
finished, gild it all over, and you will have a unique little creation
that would delight the heart of a Russian.
CHAPTER XVI
POTTERY WITHOUT A POTTER'S WHEEL
ALMOST every girl at one time in her life has loved dearly to make
mud-pies, and it is not strange, for her mother, grandmother, and many,
many times great-great-grandmother before her delighted in making
mud-pies. The last, the primitive women of our race, made them to some
purpose, for they were the inventors of pottery. The home-making,
house-keeping instinct was strong even in these women, who had no houses
to keep, and they did their best with the material at hand.
First they wove rude baskets for holding and carrying food; then they
learned that cooked food was better than uncooked and could be preserved
much longer, so they made baskets of a closer weave and cooked in them
by means of water heated by hot stones; finally, they tried cooking over
the fire in shallow baskets lined with clay. The clay came out of the
basket baked and hard, and behold, they had a new kind of
vessel--fire-proof and water-proof.
We may imagine with what joy they welcomed this addition to their meagre
store of home-making utensils and with what patient industry they strove
to improve upon this discovery.
[Illustration: Making coiled pottery]
They used their baskets as moulds to hold the soft clay, and they
fashioned the clay without moulds into shapes suggested by natural
objects. The sea-shells furnished inspiration and many vessels were made
in their beautiful forms.
The first potter was a woman, even as the first basket-maker was a
woman, and, coming down to our own times, the important discovery of the
production of exquisite colors and blending of colors in the Rookwood
pottery was made by a woman.
Discovered, developed, and still, in many cases, carried on by women,
surely pottery is a woman's art, and as a girl inheriting the old
instincts, you may find it the simplest and most natural means of
expressing your individuality and love of the beautiful. Beginning as
these gentle savages began, using their primitive method, you may be
inspired to study deeper into the art, and perhaps become the discoverer
of some new process that will give to the world a still more beautiful
pottery.
Even the smallest girls may do something in
Coiled Pottery,
for it is very simple and easy at first, growing more difficult only as
one grows ambitious to attempt more intricate forms.
The Clay
ready for use you will find at any pottery. If it is dry break into
small pieces, put it in a large stone jar, and cover with cold water;
let it stand until thoroughly soaked through and then stir with a stick
until well mixed, and work with your hands--squeezing and kneading until
free from lumps and perfectly smooth. When it is dry enough not to be
muddy, and is of the consistency of dough, it is in good working
condition.
Keep the clay always in the jar and closely covered that it may not
again become too dry.
Besides the clay you will need a table to work on, a pastry-board, a
thin block of wood about twelve inches square, a wet sponge for cleaning
and moistening your fingers, and several simple tools.
The Table.
If you stand at your work, a tall office stool with rotating seat will
be just the thing you want, for by turning the seat this way and that
you may look at your work from all sides without disturbing its
position. Any kind of ordinary table will answer the purpose, however.
On top of the table or stool place your pastry-board, and at the
right-hand side the sponge, which must be kept quite damp.
[Illustration: Fig. 321.--A short, flat stick.]
[Illustration: Fig. 322.--The tools. Piece of round stick sharpened at
each end.]
You will want but
Few Tools
as most of the work is done by the fingers alone. A short, flat stick,
sharpened on one side like the blade of a knife (Fig. 321), an old
penknife, a piece of round stick sharpened at each end like Fig. 322,
and some emery-paper are all you will need at first.
On the pastry-board place a large lump of clay, then take a handful of
the clay and begin to make
The Roll
by turning it lightly between your hands (Fig. 323). When the clay
lengthens out lay it on the board, and roll under your hands, as perhaps
you have done when making dough snakes. Keep your clay snake of an even
size its entire length, be careful not to flatten any part, and continue
to roll it with a light touch until it is about the thickness of your
little finger. Place your square block on the stand before you, and in
the centre begin
To Coil the Clay
(Fig. 324). When you have made a disk about two and one-half inches in
diameter, lift the roll and build up the sides, coiling slowly round and
round, pinching it slightly as you go, with the last row always resting
on the one just beneath (Fig. 325).
[Illustration: Fig. 323.--Turn it lightly between your hands.]
[Illustration: Fig. 324.--Begin to coil the clay.]
Unless you have made a very long roll, which is not easy to handle at
first, you will soon have to stop coiling for lack of material. Do not
use all of the first roll, but allow the end to rest on the table, where
it can be joined to the new roll you are to make. Pinch the end of the
new roll to that of the old and round the joint between your hands.
[Illustration: Fig. 325.--Lift the roll and build up the sides.]
Continue coiling until you have made a cup-shaped vessel three inches
high, then break off the roll and flatten the end to meet the surface of
the brim. Moisten your fingers on the sponge, and smooth the inside of
the cup, holding the walls in place with your left hand curved around
the outside (Fig. 326). Do not press too hard with either hand, but
slide your fingers gently round and round over the inner surface. When
the coils on the inside have become well flattened mix a little clay and
water into a paste, and spread it on, filling any cracks that may still
be left between the coils, constantly smoothing all the time.
[Illustration: Fig. 326.--Smooth the inside of the cup.]
You will find that this process has, at first, the effect of broadening
the base and lowering the sides of the cup, and until you have quite
mastered the method you must allow for the broadening and flattening of
your work. Your cup, with a base of two and one-half inches and sides
three inches in height, will now probably be a saucer measuring about
four inches across the bottom, and not more than one inch and a half in
height. It matters little, though, at this stage what shapes you turn
out. Do your best with each piece, and if the work flattens turn it into
a pretty dish by pinching the edge to form a little lip, and adding a
handle like Fig. 327.
[Illustration: Fig. 327.--Turn it into a pretty dish.]
As you are working without a wheel the symmetry of your pottery must
depend entirely upon your eye and hand, therefore keep turning the block
upon which it stands that no irregularity may be overlooked.
When you add ornaments or handles see that the roll of clay from which
you make them adheres closely to the vessel. Add soft clay to the joints
and smooth until the whole seems to be of one piece.
[Illustration: Fig. 328.--The outside corrugated by the coil.]
In your first attempts leave the outside of the pottery corrugated by
the coils (Fig. 328); later work you may smooth, making a surface equal
to that turned on a wheel. Do not try to finish a piece in one day; it
is much better to allow it to harden a little and become set, then make
it as smooth as you can with your tools, levelling the edges and taking
away extra thicknesses. If this cannot be done at one time, set the work
away once more covered with a damp cloth and it will keep in good
working condition for any length of time, but remember, the cloth must
be kept damp, otherwise the clay will harden.
When you have perfected your piece of pottery to your satisfaction put
it away to dry, _not_ in the sun. Several days later, after it has
become quite hard, go over the surface again with knife and emery-paper,
scraping and rubbing down until it is entirely smooth and free from
flaws. The work will then be ready to take to the potter for firing.
The color of clay changes in firing, and your little piece of pottery
will probably come back to you almost the color of old ivory. One cannot
be very positive about the color, however, for clays vary, and perhaps
yours may be of a kind that will fire another color. The potter will
glaze your work for you if you wish, or leave it in the bisque. Nothing
has been said about what
Shapes to Make the Pottery,
for that will depend much upon your own taste and ability. Rather low,
flat, dish shapes are most easily handled and variations in the cup or
flower-pot shape. After these may come the jars and vases. Set a
well-shaped piece of pottery before you as a model to copy, until you
have ideas of your own to carry out, and learn to handle your clay
before attempting too ambitious a subject.
CHAPTER XVII
BABY ALLIGATORS AND OTHER THINGS OF CLAY
THE first chance you have go to Florida; you will be charmed with all
you see. Go where the sky is bluest, where winter is changed to summer,
where the wild mocking-bird, the Kentucky cardinal, the scarlet tanager,
the blue jay and a host of other birds are on most friendly terms with
girls and boys. Go where the wild squirrels live unmolested in the
beautiful great live-oaks, whose branches are hung with long, soft gray
moss which swings and sways with the slightest breeze. There you will
find the home of many baby alligators, queer little things whose eyes
are provided with three eyelids; one is transparent and slides across
sidewise like a window-glass to keep the water out of the eyes when the
little fellows want to see what is going on beneath the surface. A
number of baby alligators in a dry, sunny spot, will delight in piling
upon each other four and five deep. The young owner of twenty of these
pets declares that on such occasions all the alligators sleep except one
who, wide-awake, acts as sentinel. At the approach of anyone he will
swing his long tail over all his companions to awaken them and warn them
of the danger that may be near. Fig. 329 was modelled from a baby
alligator who conducted himself in a most dignified and exemplary manner
when placed flat down on a shingle lying on a table; but first he had to
be held in position for a moment in order to recover from the excitement
caused by being taken from his out-of-door home and brought into strange
quarters.
[Illustration: Fig. 329.--Alligator modelled from life.]
It is not difficult to model a
Baby Alligator of Clay.
[Illustration: Fig. 330.--Clay for modelling alligator.]
[Illustration: Fig. 331.--Clay rolled between the hands.]
[Illustration: Fig. 332.--Beginning the head.]
[Illustration: Fig. 333.--Extra pieces on for eyes and nose.]
[Illustration: Fig. 334.--Head almost in shape.]
[Illustration: Fig. 335.--Head finished.]
All you need for the work is a lump of soft clay, a hat-pin, your
fingers, and determination to succeed. Take a piece of clay (Fig. 330)
and roll it between your hands until it resembles Fig. 331. Push the two
ends together, causing the roll to hump up slightly near the centre, lay
it down on a board or any hard, flat surface, and with the fingers
carefully pat, squeeze, and push it into the form of Fig. 332. Gently
smooth out all roughness; then nip off little pieces of clay from the
big lump for the nose and two eyes; stick them on as in Fig. 333. Again
smooth the rough edges until the clay looks like Fig. 334. With a little
careful modelling you can make the head exactly like Fig. 335. Mark the
eyes, mouth, and nose with the flat point of the pin. If portions of the
head become too thick, take off some of the clay, and if at any time the
head is worked down too thin fill in the hollow spots with clay. In
modelling one can always pinch off pieces here and there when necessary;
or add little bits, smooth it all down, and the places altered will
never show the marks of the change.
When the head is finished cover it with a wet cloth to keep the clay
moist, and begin to make
The Body.
[Illustration: Fig. 336.--Clay for body of alligator.]
[Illustration: Fig. 337.--Body of alligator.]
Mould another piece of clay like Fig. 336. Run the ball of your thumb
along the sides, making the body the form of Fig. 337, broader and
thicker through the centre than at the two ends. For the tail pull from
the large lump a smaller amount of clay, roll it and model it like Fig.
338, larger at one end than at the other. The last portion (Fig. 339),
like the others, is flat on the bottom, and with the exception of a
small triangle at the heavy end of the tail the two sides meet at the
top, forming a sharp ridge which decreases in height as it tapers down
to a point at the extreme end. As each part is finished keep it moist
with a wet cloth, and when the four sections are made place them in a
row (Fig. 340), then join them together, rounding all the edges
slightly. Fig. 341 shows how to mark the back of the alligator.
[Illustration: Fig. 338.--Section of tail.]
[Illustration: Fig. 339.--Tail of alligator.]
[Illustration: Fig. 340.--Ready to be put together.]
[Illustration: Fig. 341.--Marking the back.]
[Illustration: Fig. 342.--Roll a small piece of clay.]
Live alligators, you know, are encased in a natural
Showing first 200,000 characters. Full text: gutenberg.org/ebooks/42549