Gutenberg · e01.org

← catalogue

Hawkins Electrical Guide v. 01 (of 10)

by N. Hawkins · English · Gutenberg #38384 · 357,363 chars · public domain (US)

The Project Gutenberg eBook of Hawkins Electrical Guide v. 01 (of 10)
    
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.

Title: Hawkins Electrical Guide v. 01 (of 10)

Author: N. Hawkins


        
Release date: December 22, 2011 [eBook #38384]
                Most recently updated: January 8, 2021

Language: English

Other information and formats: www.gutenberg.org/ebooks/38384

Credits: Produced by Juliet Sutherland, Henry Gardiner and the
        Online Distributed Proofreading Team at https://www.pgdp.net


*** START OF THE PROJECT GUTENBERG EBOOK HAWKINS ELECTRICAL GUIDE V. 01 (OF 10) ***




Produced by Juliet Sutherland, Henry Gardiner and the
Online Distributed Proofreading Team at https://www.pgdp.net






       *       *       *       *       *

Transcriber’s Note: The original publication has been replicated
faithfully except as shown in the TRANSCRIBER’S AMENDMENTS at the end of
the text. This etext presumes a mono-spaced font on the user’s device,
such as Courier New. Words in italics are indicated like _this_. Text
emphasized with bold characters or other treatment is shown like =this=.
Superscripts are indicated like this: S^{ta} Maria. Subscripts are
indicated like this: H_{2}O. Footnotes are located near the end of the
work.

       *       *       *       *       *

[Illustration]

[Illustration]




      THE THOUGHT IS IN THE QUESTION THE INFORMATION IS IN THE ANSWER

                                HAWKINS

                            ELECTRICAL GUIDE

                                 NUMBER
                                  ONE

                               QUESTIONS
                                ANSWERS
                                   &
                             ILLUSTRATIONS

                     A PROGRESSIVE COURSE OF STUDY
                 FOR ENGINEERS, ELECTRICIANS, STUDENTS
                    AND THOSE DESIRING TO ACQUIRE A
                          WORKING KNOWLEDGE OF

                    ELECTRICITY AND ITS APPLICATIONS

                          A PRACTICAL TREATISE

                                   by

                           HAWKINS AND STAFF

              THEO. AUDEL & CO.   72 FIFTH AVE. NEW YORK.


                           COPYRIGHTED, 1914,
                                   BY
                           THEO. AUDEL & CO.,
                               NEW YORK.

                     Printed in the United States.




                                PREFACE


_The word “guide” is defined as:_

=_One who leads another in any path or direction; a person who shows or
points out the way, especially by accompanying or going before; more
particularly, one who shows strangers or tourists about; a conductor;
leader, as “let us follow our guide.”_=

_This book, or =“Guide,”= is so called because it =leads= or =points out
the way= to the acquirement of a theoretical and practical knowledge of
Electricity._

_There are several guides, each covering in detail a certain phase of the
broad subject of Electricity and leading the reader progressively, and in
such a way, that he easily grasps, not only the simple fundamental facts,
but the more complex problems, encountered in the study of Electricity.
This is accomplished by the aid of a =very large number of illustrations=,
together with specific explanations, worded in =concise and simple
language=._

_The Guides are written partly in the question and answer form, as this
style of presentation has met with hearty approval, not only from those of
limited education, but also from the better informed._

_Where recourse is had to the question and answer form, the special aim of
the author has been to give short and direct answers, in such plain
language as to preclude a misconception of the meaning. With this in view,
=the answer gives= simply =the information sought by the question=._

_=The answer is limited to one paragraph= so that the reader may
concentrate upon the fact or facts demanded by the question._

_Any enlargement of the answer or specific explanations of items contained
therein, are presented in separate paragraphs printed, in smaller type._

_With this plan of =separating the answer=, as it were, from items of
secondary importance, and making it short and simple, its content is more
forcibly impressed upon the mind of the reader._

_In a text book, it is necessary to illustrate and explain the various
species of commercial apparatus met with in practice, and in this
connection the Publishers desire to call attention to the manner in which
the author has treated what may be classed as the =“descriptive matter.”=
Contrary to the usual custom of giving descriptions of commercial machines
in the main text, where they would occupy considerable space, to the
exclusion of the more important matter, all such descriptions are placed
in small type directly under the illustrations, leaving space for an
adequate presentation of the underlying =principles=, =theories=, and for
the large amount of =practical information= that is essential to obtain a
general knowledge of Electricity and its numerous applications._

_Credit is largely due to Frank D. Graham, B.S., M.S. (Princeton
University), and M.E. (Stevens Institute), practical engineer, for the
authorship of the =Guides=, and for original sketches illustrating
electrical principles and construction._




                     TABLE OF CONTENTS GUIDE NO. 1.


  =INTRODUCTORY CHAPTER=

  =SIGNS AND SYMBOLS=

  =ELECTRICITY=                                                   =1 to 4=

    Nature and source--=kinds of electricity:= static, current,
    dynamic, radiated, positive, negative, atmospheric, frictional,
    resinous, vitreous.

  =STATIC ELECTRICITY=                                           =5 to 26=

    Electrical =attraction and repulsion=--the charge--distribution
    of the charge--free and bound electricity--conductors and
    insulators--=electroscopes=--gold leaf electroscope--electric
    screens--electrification by induction--nature of the induced
    charge--the electrophorus--=condensers=; Leyden jar--=electric
    machines=--action of Toepler-Holtz machine--Wimshurst machines.

  =THE ELECTRIC CURRENT=                                        =27 to 34=

    Volt--ampere--ohm--=Ohm’s law=--production of the electric
    current--current strength--voltage drop in an electric current.

  =PRIMARY CELLS=                                               =35 to 67=

    =The word “battery”=--action of cell--chemical changes;
    polarization--effects of polarization--methods of depolarization--
    depolarizers--depolarizer bag--Volta’s contact law--contact
    series of metals--=laws of chemical action in cell=--
    requirements of a good cell--=single and two fluid cells=--
    the Leclanche cell--Fuller bichromate cell--the Edison
    cell--Grenet bichromate cell--Daniell cell--directions for
    making a Daniell cell--gravity cells--Daniell gravity
    cell--so-called “dry” cells--=points relating to dry cells=--
    care of cells--cleanliness--separating the elements--creeping--
    amalgamated zinc--battery connections.

  =CONDUCTORS AND INSULATORS=                                   =68 to 74=

    The so-called “non-conductors”--=table of conductors and
    insulators=--mode of transmission--effect of heat--heating
    effect of the current--=insulators=--impregnating compounds--
    water as a conductor.

  =RESISTANCE AND CONDUCTIVITY=                                 =75 to 82=

    =Standard of resistance=--conductivity of metals and
    liquids--effect of heat--=laws of electrical resistance=--
    conductivity--specific conductivity--=divided circuits=.

  =ELECTRICAL AND MECHANICAL ENERGY=                            =83 to 92=

    =Definitions:= energy, matter, molecule, work, foot-pound,
    volt-coulomb, ampere-hour, power, horse power, =watt=, kilowatt,
    watt-hour--mechanical equivalent of heat--=British thermal
    unit=--=electrical horse power=--the farad.

  =EFFECTS OF THE CURRENT=                                     =93 to 104=

    =Thermal effect=--use of heat from the current--magnetic
    effect--chemical effect--=electrolysis=--electro-chemical
    series--electric osmose--electric distillation--muscular
    contractions--=electroplating=--electrotyping.

  =MAGNETISM=                                                 =105 to 124=

    Two kinds of magnetism--nature of each--=poles=--magnetic
    field--magnetic force--=magnetic circuit=--magnetic flux--the
    Maxwell--the Gauss--=magnetic effect of the current=--corkscrew
    rule--solenoids--permeability--magnetic saturation--magnetomotive
    force--=reluctance=--analogy between electric and magnetic
    circuits--=hystereses=--residual magnetism.

  =ELECTROMAGNETIC INDUCTION=                                 =125 to 136=

    =Faraday’s discovery=--Faraday’s machine--Faraday’s principle--
    line of force--induction of current--laws of electromagnetic
    induction--rules for direction of induced current--Fleming’s
    rule--Ampere’s rule--the palm rule--=self-induction=.

  =INDUCTION COILS=                                           =137 to 154=

    Self-induction--mutual induction--=primary induction coils=--
    =secondary induction coils=--plain secondary induction
    coils--secondary induction coils with vibrator and condenser;
    =cycle of action=--magnetic vibrators--vibrator adjustment--
    table of induction coil dimensions--table of sparking distances
    in air--=points relating to induction coils=--wiring diagram.

  =THE DYNAMO=                                                =155 to 160=

    Operation--=essential parts=--field magnets--armature--
    =construction of dynamos=--parts; bed plate, field magnets,
    armature, commutator, brushes.

  =THE DYNAMO: BASIC PRINCIPLES=                              =161 to 170=

    =Definitions=--essential parts--=elementary alternator=--
    operation--direction of induced current--application of
    Fleming’s rule--cycle of operation--=the sine curve=; its
    construction and application.

  =THE DYNAMO: CURRENT COMMUTATION=                           =171 to 180=

    How the current is produced--=how direct current is obtained=--
    the commutator--inductors--“continuous current”--action of four
    coil elementary dynamo--=conditions for steadiness of the current=.

  =CLASSES OF DYNAMO=                                         =181 to 198=

    Classification--bipolar and multi-polar dynamos--difference
    between dynamo and magneto--self-exciting dynamo--=the series
    dynamo=--regulation of series dynamo; difficulties experienced--
    =the shunt dynamo=--adaptation--operation--characteristic--
    regulation--=the compound dynamo=--service intended for--
    regulation--over compounding--usual degree of over compounding--
    short shunt--long shunt--voltage of short and long shunt machines
    --separately excited dynamos--=Dobrowolski three wire dynamo.=

  =FIELD MAGNETS=                                             =199 to 220=

    =Object=--essential parts--=classes of field magnet=--multi-polar
    field magnets--construction--choice of materials--design--=pole
    pieces=--eddy current--=laminated fields=--construction to reduce
    reluctance of the magnetic circuit--magnetizing coils--=methods of
    winding=--coil ends--insulation--attachment of coils--coil
    connections--=heating=--ventilation.




                          INTRODUCTORY CHAPTER


The subject matter of this work relates to one of the secrets of creation
which appears to have been intended at the very beginning to be “sought
out.” This idea is expressed in a certain saying copied three or four
thousand years ago by the men of Hezekiah, King of Judah: from Solomon’s
proverbs: “_It is the glory of God to conceal a thing: But the glory of
Kings_ (i.e., _wise men_), _to search out a matter._”

In all that may be said hereafter through the work, it is admitted that
the results recorded are the determinations of experiments performed by an
incredible number of searchers extending through many ages. These
inquiries have been pursued with a generous rivalry which has permitted
discovery to be added to discovery, until the sum total has been wrought
into such exactness that it has been thoughtlessly stated that there is
nothing more, save its application.

It may be well, however, to state a few fundamental facts relating to
electricity: 1, Electricity and magnetism are one and the same thing; 2,
what is really known about it has come as a discovery and not as an
invention. Thus, we say the intrepid explorer discovered the pole, not
that he invented it. So with electricity it has been a subject of
discovery while its many applications to useful purposes have been
veritable inventions; 3, the earth itself is a magnet.

This last is shown by the fact that the earth affects a magnet just as one
magnet affects another. Magnets are bodies, either natural or artificial,
which have the property of attracting iron, and the power, when freely
suspended, of taking a direction toward the poles of the earth. The
natural magnet is sometimes called the _loadstone_. This word is said to
be derived from _loedan_, a Saxon word which signifies to guide. It is an
oxide of iron of a peculiar character, found occasionally in beds of iron
ore. Though commonly met with in irregular masses only a few inches in
diameter, however, loadstones of larger sizes are sometimes found.

By means of simple experiments it may be ascertained that the magnet has
the following general properties, viz: 1, power of attraction; 2, power of
repulsion; 3, power of communicating magnetism to iron or steel; 4,
polarity, or the power of taking a direction toward the poles of the
earth; 5, power of inclining itself toward a point below the horizon.

Speaking generally we may say, that magnetism is a department of
electrical science which treats of the properties and effects of the
magnet. The same terms are also used to denote the unknown cause of
magnetic phenomena, as when we speak of magnetism as excited, imparted,
and so on.

Lightning and the Northern Lights are displays of electricity on a grand
scale. Electricity is a term derived from the Greek word for _amber_, that
being the substance in which a property of the agent now denominated
electricity was first observed.

The ancient Greek philosophers were acquainted with the fact that amber,
when rubbed, acquired the property of attracting light bodies; hence the
effect was denominated electrical and in later times, the term electricity
has been used to denote the unknown cause of electrical phenomena, and
broadly the science which treats of electrical phenomena and their causes.

Electricity, whatever it may prove to be, is not _matter_ nor is it
_energy_; it is however a means or medium of transmitting energy.

    If electricity is to transmit or convey energy along a wire,
    this energy must be imparted to the electricity from some
    external source, that is to say, before electricity can perform
    any work it must be set in motion, against more or less
    resistance. This involves that pressure must be applied, and to
    obtain this pressure, energy must be expended from some external
    source.

Accordingly, in electrical engineering, the first principle to be grasped
is that of _energy_. Without the expenditure of energy no useful work can
be accomplished.

Energy may be defined as _the capacity for performing work_.

Although electricity is not energy, electricity under pressure is a form
of energy spoken of as electrical energy.

In an expenditure of energy in this form, the electricity acts simply as a
transmission agent or medium to transmit the energy imparted to it in
causing it to flow.

    In a similar manner, steam acts as a transmission agent or
    medium to transmit the heat energy of the coal to the steam
    engine, where it is converted into mechanical energy.

As just stated, electricity under pressure is a form of energy, and its
generation is simply a transformation of energy from one form into
another. Usually, mechanical energy is converted into electrical energy,
and a dynamo is employed for effecting the transformation.

    In transforming the mechanical energy of waterfalls into
    electric energy, this natural power of water due to its weight
    and motion is first converted into rotary motion by a turbine or
    water wheel, and then converted into electric energy by a
    dynamo, or an alternator.

    All dynamos are but machines for converting into electric energy
    the energy which is given to them by some prime mover, as a
    steam engine, a gas engine, by hydraulic or even by wind power.

    All electric motors are merely machines for reconverting the
    electric energy which they receive by means of the conducting
    wires or mains, into mechanical energy.

    All electric lamps are contrivances for converting into luminous
    energy a percentage of the electric energy that is supplied
    through the mains.

=Potential and Kinetic Energy.=--_Potential energy_ is the capacity for
performing work which a body possesses _by virtue of its position_.
_Kinetic energy_ is the capacity for performing work which a body
possesses _by virtue of its motion_.

    It must be evident that position or motion given to a body
    enables it to perform work. In the first instance, for example,
    a heavy weight at the top of a high tower possesses potential
    energy. A ten pound weight supported one foot above a plane has
    ten foot pounds of potential energy.

    The flywheel of a steam engine in motion is an example of a body
    possessing kinetic energy. Some of this kinetic energy which was
    stored up in the fly wheel during the working stroke is expended
    in moving the engine over the “dead center,” and any other point
    where no torque is produced by the pressure on the piston.

=Chemical Energy= can be converted into electric energy to a limited
extent by means of the electric battery, but the cost of this energy is so
high that it is commercially feasible only where small quantities are
required, and the cost of production is secondary to the convenience of
generation, as for signalling purposes, the operation of bells and
annunciators, etc.

    The chemical energy of coal and other fuels cannot be directly
    converted into electric energy. For power producing purposes,
    the chemical energy of a fuel is first converted into heat by
    combustion, and the heat thus obtained converted into mechanical
    energy by some form of heat engine, and the mechanical energy
    subsequently transformed into electric energy in an electric
    generator.

_Energy cannot be created or destroyed._ This is the law known as the
=conservation of energy= which has been built up by Helmholtz, Thomson,
Joule and others. It teaches further, that energy can be transmitted from
one body to another or transformed in its manifestations.

    Energy may be dissipated, that is, converted into a form from
    which it cannot be recovered, as is the case with the great
    percentage of heat escaping from the exhaust nozzle of a
    locomotive or in the circulating water of a steamship, but the
    total amount of energy in the universe, it is argued, remains
    constant and invariable.

Following this law comes the doctrine of the =conservation of electricity=
as announced by Lippman, being undoubtedly the outcome of the ideas of
Maxwell and of Faraday as to the nature of electricity. According to their
doctrine, electricity _cannot be created or destroyed, although its
distribution may be altered_.

    Lippman states that every charge of electricity has an opposite
    and equal charge somewhere in the universe more or less
    distributed; that is, the sum of positive charges is always
    equal to the sum of negative charges.

In _altering the distribution of electricity_, we may cause =more= to
appear at one place and =less= at another, or may change it from the
condition of rest to that of motion, or may cause it to spin round in
whirlpools or vortices, which themselves can attract or repel other
vortices. According to this view all our electrical machines and batteries
are merely instruments for altering the _distribution_ of electricity by
moving some of it from one place to another, or for causing electricity,
when accumulated or heaped, together in one place, to do work in
returning to its former distribution.

Electrical engineering has developed largely and widely within a very
short time and its many applications has created so great a demand for
various kinds of electrical apparatus, that their manufacture forms one of
the leading industries.

Electricity is very valuable as a medium for the transmission of energy,
especially to long distances; it is also used to great advantage in
lighting, being free from the disagreeable properties of gas or oil.

Again, electricity finds various applications, in extracting gold from the
ore, pumping and ventilation of mines, traction, telephone, telegraph,
electroplating, therapeutics, etc.

These few, of its many applications will perhaps serve to indicate the far
reaching interest and importance of electricity, and possibly help to
kindle in the student something of the eagerness in his work and
enthusiasm without which he will fail to do justice either to his calling
or to himself.




                           SIGNS AND SYMBOLS


The following signs, symbols and abbreviations are almost universally
employed in descriptive and technical works on electrical subjects.

Although, in the arrangement of the Guides, the direct current and
alternating current matter has been kept separate, it is perhaps advisable
in the case of signs and symbols, to combine those relating to the
alternating current with the direct current and other symbols, making a
single table, rather than have them scattered throughout the work.

      =1. Fundamental.=

  _l_,          Length. cm. = centimeter; in., or ″ = inch, ft. or
                    ′ = foot.
  M,            Mass. gr. = mass of 1 gramme kg. = 1 kilogramme.
  T, _t_,       Time, _s_ = second.

      =2. Derived Geometric.=

  S, _s_,       Surface.
  E,            Volume.
  α, β,         Angle.

      =3. Derived Mechanical.=

  _v_,          Velocity.
  ω,            Angular velocity.
  _r_,          Momentum.
  _a_,          Acceleration.
  _g_,          Acceleration due to gravity = 32.2 feet per second.
  F, _f_,       Force.
  W,            Work.
  P,            Power.
  δ,            Dyne.
  ε,            Ergs,
  ft. lb.,      Foot pound.
  H.P., h.p.    Horse power.
  I.H.P.,       Indicated horse power.
  B.H.P.,       Brake horse power.
  E.H.P.,       Electrical horse power.
  J,            Joule’s equivalent.
  _p_,          Pressure.
  K,            Moment of inertia.

      =4. Derived Electrostatic.=

  _e_,          Pressure difference.
  _i_,          Current.
  _r_,          Resistance.
  _q_,          Quantity.
  _c_,          Capacity.
  _sc_,         Specific inductive capacity.

      =5. Derived Magnetic.=

  _m_,          Strength of pole.
  [Script J],   Intensity of magnetization.
  [Script M],   Magnetic moment.
  [Script H],   Horizontal intensity of earth’s magnetism.
  [Script H],   Field intensity.
  φ,            Magnetic flux.
  [Script B],   Magnetic flux density or magnetic induction.
  [Script H],   Magnetizing force.
  [Script F],   Magnetomotive force.
  [Script R],   Reluctance, magnetic resistance.
  μ,            Magnetic permeability.
  κ,            Magnetic susceptibility.
  ν,            Reluctivity (specific magnetic resistance).

      =6. Derived Electromagnetic.=

  R,            Resistance, ohm.
  O,            do, megohm.
  E,            Volt, pressure.
          E_im        Impressed pressure.
          E_a, E_o    Active pressure; ohmic drop.
          E_v         Virtual pressure.
          E_max       Maximum pressure.
          E_av        Average pressure.
          E_ef        Effective pressure.
          E_i         Inductance pressure.
          E_c         Capacity pressure.
  U,            Difference of pressure, volt.
  I,            Intensity of current, ampere.
          I_im        Impressed current.
          I_a         Active current.
          I_v         Virtual current.
          I_max       Maximum current.
          I_av        Average current.
          I_ef        Effective current.
  Q,            Quantity of electricity, ampere-hour; coulomb.
  C,            Capacity, farad.
  W,            Electric energy, watt-hour; Joule.
  P,            Electric power, watt; kilowatt.
  _p_,          Resistivity (specific resistance) ohm centimeter.
  G,            Conductance, mho.
  γ,            Conductivity (specific conductivity).
  Y,            Admittance, mho.
  Z,            Impedance, ohm.
  X,            Reactance, ohm.
          X_i         Inductance reactance.
          X_c         Capacity reactance.
  B,            Susceptance, mho.
  L,            Inductance (coefficient of Induction), henry.
  _v_,          Ratio of electromagnetic to electrostatic unit of quantity
                    =3×10^{10} centimeters per second approximately.

      =7. Symbols in general use.=

  D,            Diameter.
  _r_,          Radius.
  _t_,          Temperature.
  θ,            Deflection of galvanometer needle.
  N, _n_,       Number of anything.
  π,            Circumference ÷ diameter = 3.141592.
  ω,            2π_f_ = 6.2831 × frequency, in alternating current.
  ~, _f_,       Frequency, periodicity, cycles per second.
  φ,            Phase angle.
  G,            Galvanometer.
  S,            Shunt.
  N, n,         North pole of a magnet.
  S, s,         South pole of a magnet.
  A.C.          Alternating current.
  D.C.          Direct current.
  P.D.          Pressure difference.
  P.F.          Power factor.
  C.G.S.        Centimeter, Gramme, Second system.
  B.&S.         Brown & Sharpe wire gauge.
  B.W.G.        Birmingham wire gauge.
  R.p.m.        Revolutions per minute.
  C.P.          Candle power.
  [--o--],      Incandescent lamp.
  [--X--],      Arc lamp.
  [Symbol: Condenser] OR [Symbol: Condenser]    Condenser.
  [Symbol: Battery of cells]    Battery of cells.
  [Symbol: Dynamo]    Dynamo, or direct current motor.
  [Symbol: Alternator]    Alternator, or alternating current motor.
  [Symbol: Converter]    Converter.
  [Symbol: Static transformer]    Static transformer.
  [Symbol: Inductive resistance]    Inductive resistance.
  [Symbol: Non-inductive resistance]    Non-inductive resistance.




                               CHAPTER I

                              ELECTRICITY


=Nature and Source of Electricity.=--What is electricity? This is a
question that is frequently asked, but has not yet been satisfactorily
answered. It is a force, subject to control under well known laws.

While the nature and source of electricity still remain a mystery, many
things about it have become known, thus, it is positively assured that
electricity never manifests itself except when there is some mechanical
disturbance in ordinary matter.

The true nature of electricity has not yet been discovered. Many think it
a quality inherent in nearly all the substances, and accompanied by a
peculiar movement or arrangement of the molecules. Some assume that the
phenomena of electricity are due to a peculiar state of strain or tension
in the ether which is present everywhere, even in and between the atoms of
the most solid bodies. If the latter theory be the true one, and if the
atmosphere of the earth be surrounded by the same ether, it may be
possible to establish these assumptions as facts.

The most modern supposition regarding this matter, by Maxwell, is that
light itself is founded on electricity, and that _light waves_ are merely
_electromagnetic waves_. The theory “that electricity is related to, or
identical with, the luminiferous ether,” has been accepted by the most
prominent scientists.

But while electricity is still a mystery, much is known about the laws
governing its phenomena. Man has mastered this mighty force and made it
his powerful servant; he can produce it and use it.

Electricity, it is also conceded, is without weight, and, while it is
without doubt, one and the same, it is for convenience sometimes
classified according to its motion, as:

  1. Static electricity, or electricity _at rest_;
  2. Current electricity, or electricity _in motion_;
  3. Magnetism, or electricity _in rotation_;
  4. Electricity _in vibration_ (radiation).

Other useful divisions are:

  1. Positive;
  2. Negative electricity;
  3. Static;
  4. Dynamic electricity.

=Static Electricity.=--This is a term employed to define electricity
produced by friction. It is properly employed in the sense of a static
charge which shows itself by the attraction or repulsion between charged
bodies.

When static electricity is discharged, it causes more or less of a
current, which shows itself by the passage of sparks or a brush discharge;
by a peculiar prickling sensation; by a peculiar smell due to its chemical
effects; by heating the air or other substances in its path; and sometimes
in other ways.[1]

=Current Electricity.=--This may be defined as the quantity of electricity
which passes through a conductor in a given time--or, electricity in the
act of being discharged, or electricity in motion.

An electric current manifests itself by heating the wire or conductor; by
causing a magnetic field around the conductor and by causing chemical
changes in a liquid through which it may pass.

=Dynamic Electricity.=--This term is used to define current electricity to
distinguish it from static electricity.

=Radiated Electricity.=--Electricity in vibration. Where the current
oscillates or vibrates back and forth with extreme rapidity, it takes the
form of waves which are similar to waves of light.

=Positive electricity.=--This term expresses the condition of the point of
an electrified body having the higher energy from which it flows to a
lower level. The sign which denotes this phase of electric excitement is
+; all electricity is either positive or negative.

=Negative Electricity.=--This is the reverse condition to the above and is
expressed by the sign or symbol -. These two terms are used in the same
sense as _hot_ and _cold_.

=Atmospheric Electricity= is the free electricity of the air which is
almost always present in the atmosphere. Its exact cause is unknown.

The phenomena of atmospheric electricity are of two kinds; there are the
well known manifestations of thunderstorms; and there are the phenomena of
continual slight electrification in the air, best observed when the
weather is fine; the Aurora constitutes a third branch of the subject.

[Illustration: FIG. 1.--The electric eel. There are several species
inhabiting the water, and which have the power of producing electric
discharges by certain portions of their organism. The best known of these
are the _Torpedo_, the _Gymnotus_, and the _Silurus_, found in the Nile
and the Tiger. The Electric Ray, of which there are three species
inhabiting the Mediterranean and Atlantic is provided with an electric
organ on the back of its head, as shown in the illustration. This organ
consists of laminæ composed of polygonal cells to the number of 800 or
1000, or more, supplied with four large bundles of nerve fibres; the under
surface of the fish is -, the upper +. In the Surinam eel, the electric
organ goes the whole length of the body along both sides. It is able to
give a very severe shock, and is a formidable antagonist when it has
attained its full length of 5 or 6 feet.]

=Frictional Electricity= is that produced by the friction of one substance
against another.

=Resinous Electricity.=--The kind of electricity produced upon a resinous
substances such as sealing wax, resin, shellac, rubber or amber when
rubbed with wool or fur. Resinous electricity is _negative electricity_.

=Vitreous Electricity.=--A term applied to the positive electricity
developed in a glass rod by rubbing it with silk. This electric charge
will attract to itself bits of pith or paper which have been repelled from
a rod of sealing wax or other resinous substance which had been rubbed
with wool or fur.




                               CHAPTER II

                           STATIC ELECTRICITY


Static electricity may be defined simply as _electricity at rest_; the
term properly applies to an isolated charge of electricity produced by
friction. The presence of static electricity manifests itself by
_attraction_ or _repulsion_.

=Electrical Attraction and Repulsion.=--When a glass rod, or a stick of
sealing wax or shellac is held in the hand and rubbed with a piece of
flannel or cat skin, the parts will be found to have the property of
attracting bodies, such as pieces of silk, wool, feathers, gold leaf,
etc.; they are then said to be _electrified_. In order to ascertain
whether bodies are electrified or not, instruments called _electroscopes_
are used.

There are two opposite kinds of electrification:

  1. Positive;
  2. Negative.

Franklin called the electricity excited upon glass by rubbing it with silk
_positive_ electricity, and that produced on resinous bodies by friction
with wool or fur, _negative_ electricity.

The electricity developed on a body by friction depends on the rubber as
well as the body rubbed. Thus glass becomes negatively electrified when
rubbed with catskin, but positively electrified when rubbed with silk.

[Illustration: FIGS. 2 and 3.--Pith ball pendulum or electroscope; the
figures illustrate also electrical attraction and repulsion.]

The nature of the electricity set free by friction depends on the degree
of polish, the direction of the friction, and the temperature. If two
glass discs of different degrees of polish be rubbed against each other,
that which is most polished is positively, and that which is least
polished is negatively electrified. If two silk ribbons of the same kind
be rubbed across each other, that which is transversely rubbed is
negatively and the other positively electrified. If two bodies of the same
substance, of the same polish, but of different temperatures, be rubbed
together, that which is most heated is negatively electrified. Generally
speaking, the particles which are most readily displaced are negatively
electrified.

In the following list, which is mainly due to Faraday, the substances are
arranged in such order that each becomes positively electrified when
rubbed with any of the bodies following, but negatively when rubbed with
any of those which precede it:

  1. Catskin.
  2. Flannel.
  3. Ivory.
  4. Rock crystal.
  5. Glass.
  6. Cotton.
  7. Silk.
  8. The hand.
  9. Wood.
  10. Metals.
  11. Caoutchouc.
  12. Sealing wax.
  13. Resin.
  14. Sulphur.
  15. Gutta-percha.
  16. Gun cotton.

=The Charge.=--The quantity of electrification of either kind produced by
friction or other means upon the surface of a body is spoken of as a
charge, and a body when electrified is said to be _charged_. It is clear
that there may be charges of different values as well as of either kind.
When the charge of electricity is removed from a charged body it is said
to be _discharged_. Good conductors of electricity are instantaneously
discharged if touched by the hand or by any conductor in contact with the
ground, the charge thus finding a means of escaping to earth. A body that
is not a good conductor may be readily discharged by passing it rapidly
through the flame of a lamp or candle; for the flame instantly carries off
the electricity and dissipates it in the air.

=Distribution of the Charge.=--When an insulated sphere of conducting
material is charged with electricity, the latter passes to the surface of
the sphere, and forms there an extremely thin layer. The distribution of
the charge then, depends on the _extent_ of the surface and not on the
mass.

Boit proved that the charge resides on the surface by the following
experiment:

    A copper ball was electrified and insulated. Two hollow
    hemispheres of copper of a larger size, provided with glass
    handles, were then placed near the sphere, as in fig. 4. So long
    as they did not touch the sphere, the charge remained on the
    latter, but if the hemispheres touched the inner sphere, the
    whole of the electricity passed to the exterior, and when the
    hemispheres were separated and removed the inner globe was found
    to be completely discharged.

The distribution of a charge over an insulated sphere of conducting
material is uniform, provided the sphere is remote from all other
conductors and electrified bodies.

[Illustration: FIG. 4.--Boit’s experiment which proved that the _charge
resides on the surface_.]

Figs. 5 to 8 show, by the dotted lines, the distribution of a charge for
bodies of various shapes. Fig. 6 shows that for elongated bodies, the
charge collects at the ends.

The effects of points is illustrated in fig. 9; when a charged body is
provided with a point as here shown, the current accumulates at the point
to such a high degree of density that it passes off into the air, and if a
lighted candle be held in front of the point, the flame will be visibly
blown aside.

Fig. 10 shows an _electric windmill_ or experimental device for
illustrating the escape of electricity from points. It consists of a vane
of several pointed wires bent at the tips in the same direction, radiating
from a center which rests upon a pivot. When mounted upon the conductor of
an electrostatic machine, the vane rotates in a direction opposite that of
the points. The movement of the vane is due to the repulsion of the
electrified air particles near the points and the electricity on the
points themselves. The motion of the air is called _electric wind_. This
device is also called _electric flyer_, and _electric whirl_.

[Illustration: FIGS. 5 to 8.--Illustrating the distribution of the charge
on conductors of various shapes.]

=“Free” and “Bound” Electricity.=--These terms may be defined as follows:

The expression _free electricity_ relates to the ordinary state of
electricity upon a charged conductor, not in the presence of a charge of
the opposite kind. A free charge will flow away to the earth if a
conducting path be provided.

A charge of electricity upon a conductor is said to be _bound_, when it is
attracted by the presence of a neighboring charge of the opposite kind.

=Conductors and Insulators.=--The term _conductors_ is applied to those
bodies which readily allow electricity to flow through them, in
distinction from _insulators_ or so-called _non-conductors_, which
practically allow no flow of electricity.

Strictly speaking, there is no substance which will prevent the passage of
electricity, hence, the term non-conductors, though extensively used, is
not correct.

[Illustration: FIG. 9.--Experiment to illustrate the effect of pointed
conductors.]

[Illustration: FIG. 10.--Electric windmill which operates by the reaction
due to the escape of the electric charge from the points.]

=Electroscopes.=--These are instruments for detecting whether a body be
electrified or not, and indicating also whether the electrification be
positive or negative. The earliest electroscope devised consisted of a
stiff straw balanced lightly upon a sharp point; a thin strip of brass or
wood, or even a goose quill, balanced upon a sewing needle will serve
equally well. Another form of electroscope is the pith ball pendulum,
shown in figs. 2 and 3. When an electrified body is held near the
electroscope it is attracted or repelled thus indicating the presence and
nature of the charge.

=Gold Leaf Electroscope.=--This form of electroscope, which is very
sensitive, was invented by Bennet. Its operation depends on the fact that
_like charges repel each other_.

[Illustration: FIG. 11.--Gold leaf electroscope; it consists of two strips
of gold foil suspended from a brass rod within a glass jar. Used to detect
the presence and sign of an electric charge.]

The gold leaf electroscope as shown in fig. 11, is conveniently made by
suspending the two narrow strips of gold leaf within a wide mouthed glass
jar, which both serves to protect them from draughts of air and to support
them from contact with the ground. A piece of varnished glass tube is
pushed through the cork, which should be varnished with shellac or with
paraffin wax. Through this passes a stiff brass wire, the lower end of
which is bent at a right angle to receive the two strips of gold leaf,
while the upper end is attached to a flat plate of metal, or may be
furnished with a brass knob.

When kept dry and free from dust it will indicate excessively small
quantities of electricity. A rubbed glass rod, even while two or three
feet from the instrument, will cause the leaves to repel one another. If
the knob be brushed with only a small camel’s hair brush, the slight
friction produces a perceptible effect. With this instrument all kinds of
friction can be shown to produce electrification.

The gold leaf electroscope can be further used to indicate the _kind_ of
electricity on an excited body. Thus, if a piece of brown paper be rubbed
with a piece of india rubber, the nature of the charge is determined as
follows:

[Illustration: FIG. 12.--Distribution of electrification on a charged
hollow sphere. If an insulated conductor _d_ be inserted through the
opening in the sphere and brought in contact with the interior surface and
afterwards carefully removed, it will be found, by testing with the gold
leaf electroscope, that it has received no charge. If touched to the
outside, however, the conductor will receive part of the charge.]

    First charge the gold leaves of the electroscope by touching the
    knob with a glass rod rubbed on silk. The leaves diverge, being
    electrified with positive electrification. When they are thus
    charged the approach of a body which is positively electrified
    will cause them to diverge still more widely; while, on the
    approach of one negatively electrified, they will tend to close
    together. If now the brown paper be brought near the electroscope,
    the leaves will be seen to diverge more, proving the electrification
    of the paper to be of the same kind as that with which the
    electroscope is charged.

    The gold leaf electroscope will also indicate roughly the amount
    of electricity on a body placed in contact with it, for the gold
    leaves open out more widely when the quantity of electricity
    thus imparted to them is greater.

[Illustration: FIGS. 13 and 14.--Electrification produced by rubbing
dissimilar bodies together and then separating them. If the insulated
glass and leather discs A and B be rubbed together, _but not separated_,
no signs of electrification can be detected; but if the discs be drawn
apart a little distance the space between them is found to be an electric
field, and as they separate farther and farther, electric forces will be
found to exist in more and more of the surrounding space, the
electrification being indicated by “lines of force.” It should be noted
that _work has to be done_ in separating the charged discs to overcome the
attraction which tends to hold them together. The stress indicated by the
lines of force consists of a tension or pull in the direction of their
length and a pressure or thrust at right angles to that direction.]

=Electric Screens.=--That the charge on the outside of a conductor always
distributes itself in such a way that there is no electric force within
the conductor was first proved experimentally by Faraday. He covered a
large box with tin foil and went inside with the most delicate
electroscopes obtainable. Faraday found that the outside of the box could
be charged so strongly that long sparks would fly from it without any
electrical effects being observable anywhere inside the box.

    To repeat the experiment in modified form, let an electroscope
    be placed beneath a bird cage or wire netting, as in fig. 15.
    Let charged rods or other powerfully charged bodies be brought
    near the electroscope outside the cage. The leaves will be found
    to remain undisturbed.

[Illustration: FIG. 15.--The electric screen. A screen of wire gauze
surrounding a delicate electrical instrument will protect it from external
electrostatic induction.]

=Electrification by Induction.=--An insulated conductor, charged with
either kind of electricity, acts on bodies in a neutral state placed near
it in a manner analogous to that of the action of a magnet on soft iron;
that is, it decomposes the neutral electricity, attracting the opposite
and repelling the like kind of electricity. The action thus exerted is
said to take place by _influence_ or _induction_.

The phenomenon of electrification by induction may be demonstrated by the
following experiment:

    In fig. 16, let the ebonite rod be electrified by friction and
    slowly brought toward the knob of the gold leaf electroscope.
    The leaves will be seen to diverge, even though the rod does not
    approach to within a foot of the electroscope.

[Illustration: FIG. 16.--Experiment to illustrate electrostatic induction.
The leaves will diverge, even though the charged ebonite rod does not
approach to within a foot of the electroscope.]

This experiment shows that the mere _influence_ which an electric charge
exerts upon a conductor placed in its vicinity is able to produce
electrification in that conductor. This method of producing
electrification is called _electrostatic induction_.

As soon as the charged rod is removed the leaves will collapse, indicating
that this form of electrification is only a temporary phenomenon which is
due simply to the presence of the charged body in the neighborhood.

=Nature of the Induced Charge.=--This is shown by the experiment
illustrated in fig. 17.

    Let a metal ball A be charged by rubbing it with a charged rod,
    and let it then be brought near an insulated metal cylinder B
    which is provided with pith balls on strips of paper C, D, E, as
    shown.

    The divergence of C and E will show that the ends of B have
    received electrical charges because of the presence of A, while
    the failure of D to diverge will show that the middle of B is
    uncharged. Further, the rod which charged A will be found to
    repel C but to attract E.

[Illustration: FIG. 17.--Experiment illustrating the nature of an induced
charge. The apparatus consists of a metal ball and cylinder, both mounted
on insulated stands, pith balls being placed on the cylinder at points C,
D, and E.]

From these experiments, the conclusion is that when a conductor is brought
near a charged body, the end away from the inducing charge is electrified
with the same kind of electricity as that on the inducing body, while the
end toward the inducing body receives electricity of opposite sign.

=The Electrophorus.=--This is a simple and ingenious instrument, invented
by Volta in 1775 for the purpose of procuring, by the principle of
induction, _an unlimited number of charges of electricity from one single
charge_.

It consists of two parts, as shown in fig. 19, a round cake of resinous
material B, cast in a metal dish or “sole” about one foot in diameter, and
a round disc A, of slightly smaller diameter made of metal or of wood
covered with tinfoil, and provided with a glass handle. Shellac, or
sealing wax, or a mixture of resin shellac and Venice turpentine, may be
used to make the cake.

[Illustration: FIGS. 18 and 19.--The electrophorus and method of using.
Charge B; place A in contact with B, and touch A (fig. 18). The disc is
now charged by _induction_ and will yield a spark when touched by the
hand, as in fig. 19.]

To use the electrophorus, the resinous cake B must be first beaten or
rubbed with fur or a woolen cloth, the disc A is then placed on the cake,
touched with the finger and then lifted by the handle. The disc will now
be found to be charged and will yield a spark when touched with the hand,
as in fig. 19.

The “cover” may be replaced, touched, and once more removed, and will thus
yield any number of sparks, the original charge on the resinous plate
meanwhile remaining practically as strong as before.

The theory of the electrophorus is very simple, provided the student has
clearly grasped the principle of induction.

[Illustration: FIGS. 20 to 23.--Illustrating “how the electrophorus
works.”]

When the resinous cake is first beaten with the cat’s skin its surface is
negatively electrified, as indicated in fig. 20. Again, when the metal
disc is placed down upon it, it rests really only on three or four points
of the surface, and may be regarded as an insulated conductor in the
presence of an electrified body. The negative electrification of the cake
therefore acts inductively on the metallic disc or “cover,” attracting a
positive charge to its under side, and repelling a negative charge to its
upper surface, as shown in fig. 21.

If, now, the cover be touched for an instant with the finger, the negative
charge of the upper surface (which is upon the upper surface being
repelled by the negative charge on the cake) will be neutralized by
electricity flowing in from the earth through the hand and body of the
experimenter. The attracted positive charge will, however remain being
bound as it were by its attraction towards the negative charge on the
cake.

[Illustration: FIG. 24.--Lines of force of a charged sphere and a
conductor under induction. The negative electrification on the end _a_ of
the cylinder indicates that a certain number of lines end there, while the
positive electrification on the end _b_ similarly indicates that an
_equal_ number of lines set out from that end. It is one of the
fundamental properties of a conductor that it yields instantly to the
smallest electric force, and that no electric force can be permanently
maintained within the substance of a conductor in which no current is
passing. There can, therefore, be no electrostatic strain and no lines of
force within the material of a conductor where the electric field has
become steady. Hence the lines starting from _b_ are entirely distinct
from those ending at _a_. The two sets are equal in number because no
charge has been given to the cylinder, either positive or negative, and
therefore the sum of all the positive electrifications (or lines starting
from _b_) must be equal to the sum of all the negative electrifications
(or the lines ending at _a_). In all nine lines have been drawn at each
end of the cylinder, leaving the thirteen lines emanating from the sphere
which do not run on to the cylinder. If the cylinder be withdrawn to a
distance from K, it (the cylinder) will be found to show no signs of
electrification.]

Fig. 22 shows the result after the cover has been touched. If, finally,
the cover be lifted by its handle, the remaining positive charge will no
longer be “bound” on the lower surface by attraction, but will distribute
itself on both sides of the cover, and may be used to give a spark. It is
clear that no part of the original charge has been consumed in the
process, which may be repeated as often as desired. As a matter of fact,
the charge on the cake slowly dissipates--especially if the air be damp.
Hence it is needful sometimes to renew the original charge by again
beating the cake with the cat’s skin.

[Illustration: FIG. 25.--Faraday’s ice-pail experiment. An ice-pail P
connected with the gold leaves of an electroscope C, is placed on an
insulating stand S. A charged conductor K, carried by a silk thread, is
lowered into the pail, and finally touches it at the bottom. While it is
being lowered the leaves of the electroscope diverge farther and farther,
until K is well within the pail, after which they diverge no more, even
when K touches the pail or is afterwards withdrawn by the insulating
thread. After withdrawal, K is found to be completely discharged.]

The labor of touching the cover with the finger at each operation may be
saved by having a pin of brass or a strip of tinfoil projecting from the
metallic “sole” on to the top of the cake, so that it touches the plate
each time, and thus neutralizes the negative charge by allowing
electricity to flow in from the earth.

[Illustration: FIGS. 26 to 29.--Explanation of Faraday’s ice pail
experiment. For simplicity the electroscope, insulating stand and silk
thread have been omitted. Only the three principal conductors K, P, and
the earth E are shown. In fig. 26 the ball K is sufficiently close to P to
act inductively on it; six lines are shown as falling on P, and the other
six as passing to E by different paths. Corresponding to the six lines
falling on P from K, six others pass to E from the lower surfaces. In fig.
27 where K is just entering the pail, two lines only pass from K to E
through the dielectric; the remaining ten fall on P, and ten others
starting from the distant parts of P pass to E. In fig. 28, K is so far
within P that none of its lines can reach E through the dielectric; they
all fall on P and from the outside of P an equal number start and pass
through the dielectric to E. It is evident that in this position K can be
moved about within P, without affecting the outside distribution in the
slightest, and that even when K touches P as shown in fig. 29, and when,
therefore, all lines between them disappear, the lines in the dielectric
outside remain just as they are in fig. 28. K is now completely
discharged, since lines no longer emanate from it, hence it can be removed
by the silk cord without disturbing the electrification of P. If K be
again charged and introduced into P it will be again discharged, for the
fact that P is already charged will have no effect on the final result,
provided when K touches P it is well _under cover_.]

Since the electricity thus yielded by the electrophorus is not obtained at
the expense of any part of the original charge, it is a matter of some
interest to inquire whence is the source from which the energy of this
apparently unlimited supply is drawn; for it cannot be called into
existence without the expenditure of some other form of energy. The fact
is, _more work is done in lifting the cover when it is charged_ with the
positive electricity than when it is not charged; for when charged, there
is the force of the electric attraction to be overcome as well as the
force of gravity; this excess force is the real origin of the energy
stored up in the separate charges.

[Illustration: FIGS. 30 and 31.--The Leyden jar and discharger. Its
discovery is attributed to the attempt of Musschenbrock and his pupil
Cuneus to collect the supposed electric “fluid” in a bottle half filled
with water. The bottle was held in the hand and was provided with a nail
to lead the “fluid” down through the cork to the water from the electric
machine. The invention of the Leyden jar is also claimed by Kleist, Bishop
of Pomerania.]

=Condensers; Leyden Jar.=--A _condenser_ is an apparatus for condensing a
large quantity of electricity on a comparatively small surface. The form
may vary considerably, but in all cases it _consists essentially of two
insulated conductors, separated by an insulator and the working depends on
the action of induction_.

A form of condenser generally used in making experiments on static
electricity is the Leyden jar, so named from the town of Leyden where it
was invented. It consists of a glass jar coated inside and out to a
certain height with tinfoil, having a brass rod terminating in a knob
passed through a wooden stopper, and connected to the inner coat by a
loose chain, as shown in fig. 30.

The jar may be charged by repeatedly touching the knob with the charged
plate of the electrophorus or by connecting the inner coating to one knob
of an electrical machine and the outer coating to the other knob.

The discharge of a condenser is effected by connecting the plates having
an opposite charge. This may be done by use of a wire or a discharger, as
shown in fig. 31; the connection is made between the outer coat and the
knob.

When the knob of the discharger is sufficiently close to the knob of the
jar, a bright spark will be observed between the knobs. This discharge
occurs whenever the difference of potential between the coats is great
enough to overcome the resistance of the air between the knobs.

    Let a charged jar be placed on a glass plate so as to insulate
    the outer coat. Let the knob be touched with the finger. No
    appreciable discharge will be noticed. Let the outer coat be in
    turn touched with the finger. Again no appreciable discharge
    will appear. But if the inner and outer coatings be connected
    with the discharger, a powerful spark will pass.

=Electric Machines.=--Various machines have been devised for producing
electric charges such as have been described. The ordinary “static” or
electric machine, is nothing but a continuously acting electrophorus.

Fig. 32 represents the so-called Toepler-Holtz machine. Upon the back of
the stationary plate E, are pasted paper sectors, beneath which are strips
of tinfoil AB and CD called _inductors_.

In front of E is a revolving glass plate carrying discs _l_, _m_, _n_,
_o_, _p_ and _q_, called _carriers_.

To the inductors _AB_ and _CD_ are fastened metal arms _t_ and _u_, which
bring _B_ and _C_ into electrical contact with the discs _l_, _m_, _n_,
_o_, _p_ and _q_, when these discs pass beneath the tinsel brushes carried
by _t_ and _u_.

A stationary metallic rod _rs_ carries at its ends stationary brushes as
well as sharp pointed metallic combs.

The two knobs _R_ and _S_ have their capacity increased by the Leyden jars
_L_ and _L′_.

[Illustration: FIG. 32.--The Toepler-Holtz electric machine.]

[Illustration: FIG. 33.--Principle of Toepler-Holtz electric machine.]

=Action of the Toepler-Holtz Machine.=--The action of the machine
described above is best understood from the diagram of fig. 33. Suppose
that a small + charge is originally placed on the inductor _CD_. Induction
takes place in the metallic system consisting of the discs _l_ and _o_ and
the rod _rs_, _l_ becoming negatively charged and _o_ positively charged.
As the plate carrying _l_, _m_, _n_, _o_, _p_, _q_ rotates in the
direction of the arrow the negative charge on _l_ is carried over to the
position _m_, where a part of it passes over to the inductor _AB_, thus
charging it negatively.

When _l_ reaches the position _n_ the remainder of its charge, being
repelled by the negative electricity which is now on _AB_, passes over
into the Leyden jar _L_.

When _l_ reaches the position _o_ it again becomes charged by induction,
this time positively, and more strongly than at first, since now the
negative charge on _AB_, as well as the positive charge on _CD_, is acting
inductively upon the rod _rs_.

When _l_ reaches the position _u_, a part of its now strong positive
charge passes to _CD_, thus increasing the positive charge upon this
inductor.

In the position _v_ the remainder of the positive charge on _l_ passes
over to _L′_. This completes the cycle for _l_. Thus as the rotation
continues _AB_ and _CD_ acquire stronger and stronger charges, the
inductive action upon _rs_ becomes more and more intense, and positive and
negative charges are continuously imparted to _L′_ and _L_ until a
discharge takes place between the knobs _R_ and _S_.

There is usually sufficient charge on one of the inductors to start the
machine, but in damp weather it will often be found necessary to apply a
charge to one of the inductors by means of the ebonite or glass rod before
the machine will work.

=The Wimshurst Machine.=--The essential parts of an ordinary Wimshurst
machine, as shown in fig. 34, are two insulating plates or drums. On each
plate are fixed a large number of strips of conducting material, which are
equal in size and are equally spaced--radially if on a plate, and
circumferentially if on a drum. The plates, or drums, are made to rotate
in opposite directions. The capacity of the inductors therefore varies
from a maximum when each strip on one plate is facing a strip on the
other, to a minimum when the conducting strips on each plate are facing
blank or insulating portions of the other plate.

    There are three pairs of contact brushes, the members of two of
    the pairs being at opposite ends of diametrical conducting rods
    placed at right angles to one another; the third pair are
    insulated from one another and form the principal collectors,
    the one giving positive and the other negative electricity.

    The plates are revolving in opposite directions; thus if there
    be a charge on one of the conducting segments of one plate and
    an opposite charge on one of the conducting segments on the
    other plate near it, their potential will be raised as the
    rotation of the plates separates them.[2]

[Illustration: FIG. 34.--The Wimshurst Electric Machine.]




                              CHAPTER III

                          THE ELECTRIC CURRENT


The ordinary statement that an electric current is flowing along a wire is
only a conventional way of expressing the fact that the wire and the space
around the wire are in a different state from that in which they are when
no electric current is said to be flowing.

In order to make laymen understand the action of this so called current,
it is generally compared with the flow of water.

In comparing hydraulics and electricity, it must be borne in mind,
however, that there is really no such thing as an “electric fluid,” and
that water in pipes has mass and weight, while electricity has none. It
should be noted, however, that electricity is conveniently spoken of as
having weight in explaining some of the ways in which it manifests itself.

All electrical machines and batteries are merely instruments for moving
electricity from one place to another, or for causing electricity, when
accumulated in one place, to do work in returning to its former level of
distribution.

The _head_ or _pressure_ in a standpipe is what causes water to move
through the pipes which offer _resistance_ to the _flow_.

Similarly, the conductors, along which the electric current is said to
flow, offer more or less _resistance_ to the flow, depending on the
material. Copper wire is generally used as it offers little resistance.

The current must have pressure to overcome the resistance of the conductor
and flow along its surface. This pressure is called _voltage_ caused by
what is known as _difference of potential_ between the source and
terminal.

[Illustration: FIG. 35.--Analogy of the flow of water to the electric
current. The water in the reservoirs A and B stands at different heights.
As long as this difference of level is maintained, water from B will flow
through the pipe R to A. If by means of a pump P the level in B be kept
constant, flow through R will also be maintained. Here, by means of the
work expended on the pump, the level in the reservoir is kept constant;
and in the corresponding case of the electric current, by the conversion
of chemical energy a constant difference of potential is maintained.]

The pressure under which a current flows is measured in _volts_ and the
quantity that passes in _amperes_. The resistance with which the current
meets in flowing along a conductor is measured in _ohms_.

=Ques. What is a volt?=

Ans. A volt is that electromotive force (E. M. F.) which produces a
current of one ampere against a resistance of one ohm.

=Ques. What is an ampere?=

Ans. An ampere is the current produced by an E. M. F. of one volt in a
circuit having a resistance of one ohm. It is that quantity of electricity
which will deposit .005084 grain of copper per second.

=Ques. What is an ohm?=

Ans. An ohm is equal to the resistance offered to an unvarying electric
current by a column of mercury at 32° Fahr., 14.4521 grams in mass, of a
constant cross sectional area, and of the length of 106.3 centimeters.

=Ohm’s Law.=--_In a given circuit, the amount of current in amperes is
equal to the E. M. F. in volts divided by the resistance in ohms; that
is:_

  current = pressure / resistance = volts / ohms

expressed as a formula:

  I = E/R    (1)

in which

  I = current strength in amperes;
  E = electromotive force in volts;
  R = resistance in ohms.

From (1) is derived the following:

  E = IR    (2)

  R = E/I    (3)

From (1) it is seen that the flow of the current is proportional to the
voltage and inversely proportional to the resistance; the latter depends
upon the material, length and diameter of the conductor.

Since the current will always flow along the path of least resistance; it
must be so guarded that there will be no leakage. Hence, to prevent
leakage, wires are _insulated_, that is, covered by wrapping them with
cotton or silk thread or other insulating material. If the insulation be
not effective, the current may leak, and so return to the source without
doing its work. This is known as a _short circuit_.

The conductor which receives the current from the source is called the
_lead_, and the one by which it flows back, the _return_.

When wires are used for both lead and return, it is called a _metallic
circuit_: when the ground is used for the return, it is called a _ground
circuit_. An electric current is said to be:

  1. _Direct_, when it is of unvarying direction;
  2. _Alternating_, when it flows rapidly to and fro in opposite
      directions;
  3. _Primary_, when it comes directly from the source;
  4. _Secondary_, when the voltage and amperage of a primary current have
      been changed by an _induction coil_;
  5. _Low tension_, when its voltage is low;
  6. _High tension_, when its voltage is high.

    A high tension current is capable of forcing its way against
    considerable resistance, whereas, a low tension current must
    have its path made easy.

=Production of the Electric Current.=--To produce a steady flow of water
in a pipe two conditions are necessary. There must first be available a
hydraulic pressure, or, as it is technically called, a “_head_” of water
produced by a pump, or a difference of level or otherwise.

In addition to the pressure there must also be a suitable path or channel
provided for the water to flow through, or there will be no flow, however
great the “head,” until something breaks down under the strain. In the
case just cited, although there is full pressure in the water in the pipe,
there is no current of water as long as the tap remains closed. The
opening of the tap completes the necessary _path_ (the greater part of
which was already in existence) and the water flows.

[Illustration: FIG. 36.--Hydraulic analogy of the electric current. If,
say 10 gallons of water flow in every second into a system of vessels and
pipes of any shape, whether simple or more complicated as shown in the
figure, and 10 gallons flow out again per second, it is evident that
through every cross section of any vessel or pipe of the system 10 gallons
of water pass every second. This follows from the fact that water is an
uncompressible liquid and must be practically of the same density
throughout the system. The water moves slowly where the section is large
and quickly where it is small, and thus the quantity of water that flows
through any part of the system is independent of the cross section of that
part. The same condition holds good for the electric current; if in a
closed circuit a constant current circulates, the same amount of
electricity will pass every cross section per second. Hence the following
law: _The magnitude of a constant current in any circuit is equal in all
parts of the circuit._]

For the production of a steady electric current two very similar
conditions are necessary. There must be a steadily maintained electric
pressure, known under different aspects as “electromotive force,”
“potential difference,” or “voltage.” This alone, however, is not
sufficient. In addition, a suitable conducting path is necessary. Any
break in this path occupied by unsuitable material acts like the closed
tap in the analogous case above mentioned, and it is only when all such
breaks have been properly bridged by suitable material, that is, by
conductors, that the effects which denote the flow of the current will
begin to be manifested.

The necessary electromotive force or voltage required to cause the current
to flow may be obtained:

  1. Chemically;
  2. Mechanically;
  3. Thermally.

In the first method, two dissimilar metals such as copper and zinc called
_elements_, are immersed in an exciting fluid or _electrolyte_.

[Illustration: FIG. 37.--Volta’s “Crown of Cups.” The metallic elements C
and Z each consisted of two metals, the plate C being of copper and the
plate Z of zinc. They were placed, as shown, in the glass vessels, which
contained salt water and ordinary water or lye. Into each vessel, except
the two end ones, the copper end of one arc and the zinc end of the next
were introduced, the series, however long, ending with copper dipping into
the terminal vessel at one end and zinc into that at the other. The
arrangement is almost exactly that of a modern one-fluid primary battery.]

When the elements are connected at their terminals by a wire or conductor
a chemical action takes place, producing a current which flows from the
copper to the zinc. This device is called a _cell_, and the combination of
two or more of them connected so as to form a unit is known as a
_battery_. _The word battery is frequently used incorrectly for a single
cell._ That terminal of the element from which the current flows is called
the _plus_ or _positive pole_, and the terminal of the other element the
_negative pole_.

    Cells are said to be _primary_ or _secondary_ according as they
    generate a current of themselves, or first require to be charged
    from an external source, storing up a current supply which is
    afterwards yielded in the reverse direction to that of the
    charging current.

An electric current is generated mechanically by a _dynamo_. In either
case _no electricity is produced, but part of the supply already existing
is simply set in motion by creating an electric pressure_.

An electric current, according to the third method, is generated directly
from heat energy, as will be later explained; the current thus obtained is
very feeble.

[Illustration: FIG. 38.--Hydrostatic analogy of fall of potential in an
electrical circuit.]

[Illustration: FIG. 39.--Showing method of connecting voltmeter to find
potential difference between any two points as _m_ and _n_ on an
electrical circuit.]

=Strength of Current.=--It is important that the reader have a clear
conception of this term, which is so often used. The exact definition of
the strength of a current is as follows:

_The strength of a current is the quantity of electricity which flows past
any point of the circuit in one second._

    _Example._--If, during 10 seconds, 25 coulombs of electricity
    flow through a circuit, then the average strength of the current
    during that time is 2-1/2 coulombs per second, or 2-1/2
    amperes.

=Voltage Drop in an Electric Circuit.=--A difference of potential exists
between any two points on a conductor through which a current is flowing
on account of the resistance offered to the current by the conductor.

For instance, in the electrical circuit shown in fig. 39, the potential at
the point _a_ is higher than that at _m_, that at _m_ higher than that at
_n_, etc., just as in the water circuit, shown in fig. 38, the hydrostatic
pressure at _a_ is greater than that at _m′_, that at _m′_ greater than
that at _n′_, etc. The fall in the water pressure between _m′_ and _n′_
(fig. 38) is measured by the water head _n’s_.

In order to measure the fall in electrical potential between _m_ and _n_,
(fig. 39), the terminals of a volt meter are placed in contact with these
points as shown. Its reading will give the difference of potential between
_m_ and _n_, in volts, provided that its own current carrying capacity is
so small that it does not appreciably lower the potential difference
between the points _m_ and _n_ by being touched across them; that is,
provided the current which flows through it is negligible in comparison
with that which flows through the conductor which already joins the points
_m_ and _n_.




                               CHAPTER IV

                             PRIMARY CELLS


The word “battery” is a much abused word, being often used incorrectly for
“cell,” as in fig. 40. Hence, careful distinction should be made between
the two terms.

_A battery consists of two or more cells joined together so as to form a
single unit._

There are numerous forms of primary cell; they may be classified as
follows:

1. According to the service for which they are designed;

2. According to the chemical features.

With respect to the first method cells are classified as:

1. Open circuit cells;

    Used for _intermittent work_, where the cell is in service for
    short periods of time, such as in electric bells, signaling
    work, and electric gas lighting. If kept in continuous service
    for any length of time the cell soon polarizes or “runs down,”
    but will recuperate after remaining on open circuit for some
    little time.

2. Closed circuit cells.

    This type of cell is adapted to furnishing current continuously,
    as in telegraphy, etc.

With respect to the second method, cells are classified as:

  1. One fluid;
  2. Two fluid;

=Ques. Describe a primary cell.=

Ans. A primary cell consists of a vessel containing a liquid in which two
dissimilar metal plates are immersed.

    In _one fluid_ cells both metal plates are immersed in the same
    solution. In _two fluid_ cells each metal plate is immersed in a
    separate solution, one of which is contained in a porous cup
    which is immersed in the other liquid.

=Ques. What name is given to the metal plates?=

Ans. They are called _elements_.

=Ques. What is the fluid called?=

Ans. The _electrolyte_ or _exciting fluid_.

    The term “electropoion” is a trade name for the electrolyte
    employed in the Fuller cell.

=Action of a Primary Cell.=--The fundamental fact on which the
electro-chemical generation of current depends is, that if a plate of
metal be placed in a liquid there is a difference of electrical condition
produced between them of such sort that the metal either takes a lower or
higher electrical potential than the liquid, according to the nature of
the metal and the liquid. If two different metals be placed in one
electrolytic liquid, then there is a difference of state produced between
them, so that, if joined by wire outside the liquid, a current of
electricity will traverse the wire. This current proceeds in the liquid
from the metal which is most acted upon chemically to that which is least
acted upon.

Referring to fig. 41, the construction and action of a simple primary cell
may be briefly described as follows:

Place in a glass jar some water having a little sulphuric or other acid
added to it. Place in it separately two clean strips, one of zinc, Z, and
one of copper, C. This cell is capable of supplying a continuous flow of
electricity through a wire whose ends are brought into connection with
the two strips. When the current flows, the zinc strip is observed to
waste away, its consumption in fact furnishing the energy or electromotive
force required to drive the current through the cell and the connecting
wire. The cell may therefore be regarded as a kind of chemical furnace in
which the fuel is the zinc.

[Illustration: FIG. 40.--Simple primary cell. It consists of two
dissimilar metal plates (such as copper and zinc which are called the
_elements_), immersed in the _electrolyte_ or exciting fluid contained in
the glass jar.]

=Ques. How are the positive and negative elements of a primary cell
distinguished?=

Ans. The plate attacked by the electrolyte is the negative element, and
the one unattacked the positive element.

=Chemical Changes; Polarization.=--The chemical changes which take place
in a simple cell, consisting of zinc and copper elements in an electrolyte
of dilute sulphuric acid, may be briefly described as follows: When the
two elements are connected and the current commences to flow, the
sulphuric acid acts on the surface of the zinc plate and forms sulphate of
zinc. The formation of this new substance necessitates the liberation of
some of the hydrogen contained in the sulphuric acid, and it will be found
that bubbles of free hydrogen gas speedily appear on the surface of the
negative element, that is, on the copper plate.

While the zinc is being dissolved to form zinc sulphate, hydrogen gas is
liberated from the sulphuric acid.

[Illustration: FIG. 41.--Simple primary cell with circuit closed, showing
direction of the current.]

Some bubbles of the gas rise to the surface of the electrolyte and so
escape into the air, _but much of it clings to the surface of the copper
element which thus gradually becomes covered with a thin film of
hydrogen_.

Partly on account of the decreased area of copper plate in contact with
the electrolyte, and partly because the hydrogen tends to produce a
current in the opposite direction, the useful electrical output becomes
considerably diminished and the cell is said to be _polarized_. This state
of affairs may be rectified by stirring up the electrolyte, or by shaking
the cell, so as to assist the hydrogen bubbles to detach themselves from
the surface of the copper plate and make their way to the atmosphere
through the electrolyte. This, however, is only a temporary remedy, as the
polarized condition will soon be reached again, and a further agitation of
the cell will be necessary. Hence, a simple cell of this kind is not
desirable for practical work, and it must be modified to adapt it to
constant use.

When the sulphuric acid in a cell acts in the zinc element and produces
sulphate of zinc, a certain amount of work is done which is manifested
partly in the form of useful electric energy, and partly as heat which
warms the electrolyte and which is thereby lost for all practical
purposes.

=Ques. If the zinc and copper electrodes of a simple cell be not connected
externally what changes take place within the cell?=

Ans. The zinc plate immediately becomes strongly charged with negative
electricity, and the copper plate weakly so. As long as the plates remain
unconnected, and the zinc is pure, no further action takes place.

=Ques. If the electrodes be connected externally what happens?=

Ans. If the plates be connected by a wire outside the electrolyte, the
tendency which dissimilar electrical charges have to neutralize one
another causes a flow of negative electricity through the wire from zinc
to copper, and a positive flow in the opposite direction. The “static”
charge being thus disposed of, a fresh charge is given to the plates by
the action of the acid, which commences to dissolve the zinc. As long as
the wire connects the copper and zinc plates, the acid will continue its
action on the zinc until either acid or zinc is exhausted.

    The reader may ask: how can there be a positive flow when both
    plates are negatively electrified?

    An analogy is the best way to make this point clear: Imagine two
    equal vessels, from each of which the air has been partially
    exhausted, but from one (A) 10 times as much air has been taken
    as from the other (B). Connect A and B by a tube. Now, although
    both vessels have less than the atmospheric pressure, that is,
    both have “negative” pressures, yet a current of air will flow
    from B to A until the pressures in each are equalized; that is,
    until both have equal “negative charges” of air.

There is a second important effect of the acid solution or electrolyte in
a cell. If pure sulphuric acid were used, the first action or production
of an electrical charge on the zinc plate would be the same, but when the
plates were joined by the wire the current would soon cease. The reason
for this lies in the fact that the sulphate of zinc, which is the compound
produced by the acid plus the zinc, being insoluble in pure undiluted
sulphuric acid, remains on the surface of the zinc plate. The coating of
sulphate of zinc thus formed also operates as a protective agent, and no
further electrical charge can be induced until it is removed. The addition
of water to the acid has the effect of allowing the sulphate of zinc to
dissolve, and the zinc plate is left free for further action.

=Ques. What governs the rate of current flow of a primary cell?=

Ans. The size of the elements and their proximity.

=Effects of Polarization.=--The film of hydrogen bubbles affects the
strength of the current of the cell in two ways:

1. It weakens the current by the increased _resistance_ which it offers to
the flow, for bubbles of gas are bad conductors;

2. It weakens the current by setting up an opposing _electromotive
force_.

    Hydrogen is almost as oxidizable a substance as zinc, especially
    when freshly deposited (in the “nascent” state), and is
    electro-positive; hence, the hydrogen itself produces a
    difference of potential, which would tend to start a current in
    the opposite direction to the true zinc-to-copper current. It is
    therefore an important matter to abolish this polarization,
    otherwise the currents furnished by batteries would not be
    constant.

=Methods of Depolarizing.=--One of the chief aims in the arrangement of
the numerous cells which have been devised is to avoid polarization. The
following are the methods usually employed:

1. Chemical methods;

    _a_. Oxidation of the hydrogen by potassium bichromate and by
    nitric acid.

    _b_. Substitution of the hydrogen by some other substance which
    does not give a counter electromotive force of polarization; for
    instance, in the Daniell cell by replacement of the copper in
    copper sulphate by the hydrogen, the copper being deposited on
    the positive pole.

2. Electro-chemical means;

    It is possible by employing double cells, to secure such action
    that some solid metal, such as copper, shall be liberated
    instead of hydrogen bubbles, at the point where the current
    leaves the liquid. This electro-chemical exchange obviates
    polarization.

3. Mechanical methods.

    _a_. Agitation of the liquid or of the positive electrode, in
    order to prevent the accumulation of hydrogen thereon.

    _b_. Corrugating or roughing the positive electrode, as in the
    Smee cell. This causes the hydrogen gas to form in large bubbles
    which rise to the surface more rapidly than the small bubbles
    which form on a smooth electrode.

In the simplest form of cell, as zinc, copper, and dilute sulphuric acid,
no attempt has been made to prevent the evil of polarization, hence, it
will quickly polarize when the current is closed for any length of time,
and may be classified as an open circuit cell.

When polarization is remedied by chemical means, the chemical added is one
that has a strong affinity for hydrogen and will combine with it, thus
preventing the covering of the negative plate with the hydrogen gas.

[Illustration: FIGS. 42 and 43.--Carbon cell and carbon cylinder. Carbon
possesses a natural power to prevent a limited amount of polarization by
absorbing the hydrogen gas coming from the zinc rod; hence it is used in
various shapes for open circuit cells, which gives rise to as many
different names, such as _Samson_, _Hercules_, _Law_, _National_,
_Standard_, etc. In all these types of cell, sal-ammoniac and zinc are
used, and by corrugating the carbon, fluting it, or making concentric
cylinders, special merits are obtained in each case. The carbon element is
usually made in the form of a porous cup, filled with oxide of manganese
to prevent polarization, and then sealed. The zinc rod is inserted through
a porcelain insulator. About 4 to 6 ounces of sal-ammoniac are generally
used for cells of ordinary size. The salt is placed in the jar, water
poured in until it is about two-thirds full, and then stirred till all the
salt is dissolved. When the carbon cylinder is inserted, the solution
should be within 1-1/2 inches of the top of the jar. The electromotive
force is from 1.0 to 1.4 volts for the different forms of carbon cell.]

=Ques. What is a depolarizer?=

Ans. A substance employed in some types of cell to combine with the
hydrogen which would otherwise be set free at the positive electrode and
cause polarization.

    The chemical used for this purpose may be either in a _solid_ or
    _liquid_ form, which gives rise to several types of cell, such
    as cells with a single fluid, containing both the acid and the
    depolarizer, cells with a single exciting fluid and a solid
    depolarizer, and cells with two separate fluids.

    In the two fluid cell, the zinc is immersed in the liquid
    (frequently dilute sulphuric acid) to be decomposed by the
    action upon it, and the negative plate is surrounded by the
    liquid depolarizer, which will be decomposed by the hydrogen gas
    it arrests, thereby preventing polarization.

In _open circuit cells_ polarization does not have much opportunity to
occur, since the circuit is closed for such a short period of time; hence,
these cells are always ready to deliver a strong current when used
intermittently.

In _closed circuit cells_ polarization is prevented by chemical action, so
that the current will be constant and steady till the energy of the
chemicals is expended.

=Ques. What is a depolarizer bag?=

Ans. A cylinder of hemp or other fabric used in place of a porous pot in
some forms of Leclanche cell, and also as a support for the depolarizing
mass in some forms of dry cell where the electrolyte is of a thin
gelatinous nature.

=Volta’s Contact Law.=--When metals differing from each other are brought
into contact, different results are obtained, both as to the kind of
electrification as well as the difference of potentials.

Volta found that iron, when in contact with zinc, becomes negatively
electrified; the same takes place, but somewhat weaker, when iron is
touched with lead or tin. When, however, iron is touched by copper or
silver, it becomes positively electrified. Volta, Seebeck, Pfaff, and
others have investigated the behavior of many metals and alloys when in
contact with each other.

The following lists are so arranged that those metals first in each list
become positively electrified when touched by any taking rank after them:

CONTACT SERIES OF METALS

  _According to Volta_.   _According to Pfaff._
      + zinc                   + zinc
        lead                     cadmium
        tin                      tin
        iron                     lead
        copper                   tungsten
        silver                   iron
        gold                     bismuth
        graphite                 antimony
      - manganese ore            copper
                                 silver
                                 gold
                                 uranium
                                 tellurium
                                 platinum
                               - palladium

Volta laid down a law regarding the position of the metals in his table
which may be stated as follows:

_The difference of potential between any two metals is equal to the sum of
the differences of potentials of all the intermediate members of the
series._

Hence, it is immaterial for the total effect whether the first and the
last are brought into contact directly, or whether the contact is brought
about by means of all or any of the intermediate metals.

    Volta’s law further asserts that when any number of metals are
    brought into contact with each other, but so that the chain
    closes with the metal with which it was begun, the total
    difference must be zero.

=Laws of Chemical Action in the Cell.=--There are two simple laws of
chemical action in the cell:

1. _The amount of chemical action in a cell is proportional to the
quantity of electricity that passes through it._

    One coulomb of electricity in passing through the cell liberates
    .000010352 of a gramme of hydrogen, and causes .00063344 of a
    gramme of zinc to dissolve in the acid.

2. _The amount of chemical action is equal in each cell of a battery
connected in series._

=Requirements of a Good Cell.--=The several conditions which should be
fulfilled by a good cell are as follows:

  1. Its electromotive force should be high and constant;
  2. Its internal resistance should be small;
  3. It should be perfectly quiescent when the circuit is open;
  4. It should give a constant current, and therefore must be free from
      polarization, and not liable to rapid exhaustion;
  5. It should be easily cared for, and if possible, should not emit
      corrosive fumes;
  6. It should be cheap and of durable materials.

=Single and Two Fluid Cells.=--The distinction between a single and a two
fluid cell has already been given. The single fluid cell of Volta with its
zinc and copper plates represents the simplest form of primary cell.

In the _two fluid cell_, the positive (zinc) plate is immersed in the
exciting liquid (usually dilute sulphuric acid) and is decomposed by the
action upon it, while the negative plate is placed in the liquid
depolarizer which is decomposed by the hydrogen arrested by it, thus
preventing polarization.

In some forms of cell, the two liquids are separated by a porous partition
of unglazed earthenware, which, while it prevents the liquids mixing
except very slowly, does not prevent the passage of hydrogen and
electricity.

[Illustration: FIGS. 44 and 45.--Leclanche cell and porous cup. This very
common form of cell is an example of the single fluid type, with a solid
depolarizer surrounding the negative element; the latter is generally
carbon, the positive element being zinc. The liquid used is a strong
solution of ammonium chloride, commonly known as sal-ammoniac, and which
resembles table salt. In the porous cup type of cell, a carbon slab is
placed in the porous cup, and is surrounded by a mixture of small pieces
of carbon and manganese dioxide, the top being covered by means of pitch,
leaving one or two small holes for air and gas to pass through. The
depolarizer will take care of a limited amount of the hydrogen produced
when the cell is on closed circuit, but if the circuit be closed for any
length of time polarization occurs. The cell is thus of the open circuit
class, and will furnish a good current where it is required only
intermittently. Zinc is dissolved only when the cell is being used. This
type of cell, or its modification, is used for gas lighting and bell work.
The cell requires very little attention. Water must be added as the
solution evaporates, and the zinc rod replenished when necessary. The
electromotive force is about 1.48 volts and the internal resistance about
4 ohms.]

Complete depolarization is usually obtained also in single fluid cells,
having in addition a depolarizing solid body, such as oxide of manganese,
oxide of copper, or peroxide of lead, in contact with the carbon pole.
Such cells really do not belong to the single fluid cells, and are
considered in the two fluid class.

A few examples of single and double fluid primary cells will now be
described.

=The Leclanche Cell.=--This cell was invented by Leclanche, a French
electrician, and was the first cell in which sal-ammoniac was used. This
form of cell, as shown in fig. 45, is in general use for electric bells,
its great recommendation being that, once charged, it retains its power
without attention for considerable time.

Two jars are employed in its construction; the outer one is of glass,
contains a zinc rod, and is charged with a solution of ammonium chloride,
called sal-ammoniac.

The inner jar is of porous earthenware, containing a carbon plate, and is
filled with a mixture of manganese peroxide and broken gas carbon. When
the carbon plate and the zinc rod are connected, a steady current of
electricity is set up, the chemical action which takes place being as
follows: _the zinc becomes oxidized by the oxygen from the manganese
peroxide, and is subsequently converted into zinc chloride by the action
of the sal-ammoniac_.

After the battery has been in continuous use for some hours, the manganese
becomes exhausted of oxygen, and the force of the electrical current is
greatly diminished; but if the battery be allowed to rest for a short
time, the manganese obtains a fresh supply of oxygen from the atmosphere,
and is again fit for use.

After about 18 months work, the glass cell will probably require
recharging with sal-ammoniac, and the zinc rod may also need renewing; but
should the porous cell get out of order, it is better to get a new one
than to attempt to recharge it.

The directions for setting up a Leclanche cell are as follows:

    1. Place in the glass jar six ounces of sal-ammoniac, and pour
    in water until the jar is one-third full, then stir thoroughly.

    2. Place the porous cup in the solution, and if necessary add
    water until it rises to within 1-1/2 inches of the top of the
    porous cup.

    3. Put the zinc rod in place and set the cell away (not
    connected up), for about 12 hours, so as to allow the liquid to
    thoroughly soak into the porous cup. This will lower the level
    of the liquid to about one-third the height of the jar. The cell
    will then be ready for use. As the level of the liquid is
    lowered by evaporation, it should be maintained at the stated
    height by adding water.

The Leclanche cell is adapted to open circuit work, being extensively used
for ringing electric bells.

The objections to the Leclanche cell are:

  1. Rapid polarization;
  2. High internal resistance due to porous pot;
  3. Restricted space for electrolyte causing rapid lowering of level of
      liquid by evaporation;
  4. Eating away of the zinc rod at the surface of the liquid, rendering
      the rod useless before the lower part is consumed.

=Fuller Bichromate Cell.=--In the bichromate cells or the chromic acid
cells, bichromate of soda, or bichromate of potassium, is used for the
depolarizer, water and sulphuric acid being added for attacking the zinc.

The Fuller cell is of the two fluid type. A pyramidal block of zinc at the
end of a metallic rod covered with gutta-percha is placed in the bottom of
a porous cup containing an ounce of mercury. The cup is then filled with a
very dilute solution of sulphuric acid or water and placed in a jar of
glass or earthenware containing the bichromate solution and the carbon
plate. The diffusion of the acid through the porous cup is sufficiently
rapid to attack the zinc, which being well amalgamated, prevents local
action; while the hydrogen passes through the porous cup and combines with
the oxygen in the bichromate of potassium. This type of cell has an
electromotive force of 2.14 volts, and is suited to open circuit, or
semi-closed circuit work. The directions for setting up a Fuller cell are
as follows:

    1. To make the “electropoion” fluid, mix together one gallon of
    sulphuric acid and three gallons of water, and in a separate
    vessel, dissolve six pounds of bichromate of potash in two
    gallons of boiling water; then thoroughly mix together the two
    solutions.

    2. Immerse the zinc in a solution of dilute sulphuric acid, and
    then in a bath of mercury, and rub it with a brush or cloth so
    as to reach all parts of the surface.

    3. Pour into the porous cell one ounce (a tablespoonful) of
    mercury, and fill the porous cell with water up to within two
    inches of the top.

    4. Place the porous cell and the carbon plate in the glass jar,
    as in fig. 46, and fill glass jar to within about three inches
    of the top with a mixture of three parts of electropoion fluid
    to two parts of water.

[Illustration: FIGS. 46 and 47.--The telephone standard and compound forms
of the Fuller cell. The type shown in fig. 46 is especially adapted to
long distance telephoning, and that shown in fig. 47 to incandescent
lamps, motors, nickel and other electroplating. The Fuller cell is a
double fluid variety and has the advantage over the Grenet type, in that
the zinc is always kept well amalgamated and does not require removal from
the solution. The Fuller cell is suitable for open and semi-closed circuit
work; its electromotive force is about 2.14 volts.]

    5. The zinc should be lifted out occasionally and the sulphate
    washed off.

    6. The supply of mercury in the porous cell should be
    maintained, so as to have the zinc always well amalgamated.

    7. To renew, clean all deposits from carbon plate and zinc, and
    set up with fresh solution.

=The Edison Cell.=--This is a single fluid cell with a solid depolarizer,
as shown in fig. 48, and is well adapted for use on closed circuits.

[Illustration: FIG. 48.--Edison cell, type R R. The electrolyte used is
caustic soda, the positive element zinc, and the negative element copper
oxide. The Edison cell is suitable for large stationary gas engine
ignition, railroad crossing signals, electroplating, fire alarms,
telephone circuits, etc.]

The positive element is zinc, and the negative element black oxide of
copper. The exciting fluid is a solution of caustic potash. The black
oxide of copper plates are suspended from the cover of the jar by a light
framework of copper, one end of which forms the positive pole of the
battery. A zinc plate is suspended on each side of the copper oxide
element and kept from coming in contact with the latter by means of
vulcanite buttons.

When the cell is in action, the water is decomposed, and the oxygen thus
liberated combines with the zinc and forms oxide of zinc, which combines
with the potash to form a double salt of zinc and potash. The last
combination dissolves as rapidly as it is formed. The hydrogen liberated
by the decomposition of the water reduces the copper oxide to pure
metallic copper. It is highly important that the copper oxide plates be
completely submerged in the solution of caustic potash, and that heavy
paraffin oil be poured on top of the solution to the depth of about 1/4 of
an inch to exclude the air. If oil be not used, the formation of creeping
salts will reduce the life of the battery fully two-thirds. The battery
has a low electromotive force, about 0.7 of a volt, but as the internal
resistance is also very low, quite a large current can be drawn from the
cell.

The _Bunsen Cell_, shown in figs. 49 and 50, is a two fluid cell
constructed with zinc and carbon electrodes. The negative plate is carbon,
the positive plate amalgamated zinc. The excitant is a dilute solution of
sulphuric acid. The top part of the carbon is sometimes impregnated with
paraffin (to keep the acid from creeping up).

The force of the Bunsen cell increases after setting up for about an hour,
and the full effect is not attained until the acid soaks through the
porous cell. Carbons are not affected and last any length of time. The
zinc is slowly consumed through the mercury coating.

=Grenet Bichromate Cell.=--In this cell, as shown in figs. 49 and 50, the
positive element is zinc and the negative element carbon. The electrolyte
is a solution of bichromate of potash in a mixture of sulphuric acid and
water.

[Illustration: FIGS. 49 and 50.--American and French forms of Grenet cell.
The elements are zinc and carbon. In the Grenet cell, a zinc plate is
suspended by a rod between two carbon plates, so that it does not touch
them, and when the cell is not in use the zinc is withdrawn from the
solution by raising and fastening the rod by means of a set screw, as the
acid attacks the zinc when the cell is on open circuit. This cell has an
electromotive force of over 2 volts at first, and gives a strong current
for a short time, but the liquid soon becomes exhausted, as will be noted
by the change in the color of the solution from an orange to a dark red,
and must be replenished. The zinc should be kept well amalgamated and out
of the solution except when in use. It is a good type of cell for
experimental work. To make the electrolyte take 3 ounces of finely
powdered bichromate of potash and 1 pint of boiling water; stir with a
glass rod and after it is cool, add slowly, stirring all the time, 3
ounces of sulphuric acid. The electrolyte may also be prepared as follows:
take 4 ounces of bichromate of soda, 1-1/4 pints of boiling water, and 3
ounces of sulphuric acid.]

The cell consists of a glass bottle containing the electrolyte and fitted
with a lid from which the elements are supported. There is a zinc plate in
the center and a carbon plate on each side. The two carbon plates are
connected to the same terminal, thus forming a large negative surface, and
the zinc plate to a terminal on the top of the brass rod to which it is
attached. This rod slides through a hole in the lid so that the zinc
plate can be lifted out of the electrolyte when the cell is not at work,
thus preventing wasteful consumption of zinc and of the electrolyte.
Bichromate cells give a strong current, the electromotive force of a
single cell being 2 volts.

[Illustration: FIG. 51.--The Bunsen cell. This is a two fluid cell and has
a bar of carbon immersed in strong nitric acid contained in a porous cup.
This cup is then placed in another vessel, containing dilute sulphuric
acid, and immersed in the same liquid, is a hollow cylindrical plate of
zinc, which nearly surrounds the porous cup. The hydrogen, starting at the
zinc, traverses by composition and recomposition, the sulphuric acid; it
then passes through the porous partition, and enters into chemical action
with the nitric acid, so that none of it reaches the carbon. Water is
produced by this action, which in time dilutes the acid, and orange
colored poisonous fumes of nitric oxide rise from the battery. If the
nitric acid first be saturated with nitrate of ammonia, the acid will last
longer and the fumes be prevented. Strong sulphuric acid cannot be used in
any battery; one part of sulphuric acid is generally added to 12 parts by
weight, or 20 by volume, of water. _Grove_ used a strip of _platinum
instead of carbon_ in his cell. A solution of bichromate of potassium is
frequently substituted for the nitric acid in the porous cup, thereby
avoiding disagreeable fumes. Bunsen’s and Grove’s cells produce powerful
and constant currents, and are well adapted for experiments, but they
require frequent attention, and are expensive, so that they are little
used for work of long duration. The electromotive force of these cells is
from 1.75 to 9.51 volts.]

=Daniell Cell.=--This is one of the best known and most widely used forms
of primary cell. It is a double fluid cell, composed of an inner porous
vessel containing an electrolyte of either dilute sulphuric acid or
dilute zinc sulphate solution, and an outer vessel containing a saturated
solution of copper sulphate.

A zinc rod is placed in the inner electrolyte, and a thin plate of sheet
copper in the outer electrolyte. Sometimes this arrangement of the
elements is modified, the outer vessel being made of copper and serving as
the copper plate. This would then contain the copper sulphate solution,
while the zinc sulphate and the zinc rod would be contained in the porous
pot as before.

The chemical reactions which take place in a Daniell cell are as follows:

    The zinc dissolves in the dilute acid, thus producing zinc
    sulphate, and liberating hydrogen gas. The free hydrogen passes
    through the walls of the porous pot, but when it reaches the
    copper sulphate solution it displaces some of the copper
    therefrom, and combines with this solution, forming sulphuric
    acid. The copper, which is thus set free, is deposited on the
    surface of the copper plate. In this way polarization is
    avoided, and a practically constant current is obtained.

    When the zinc sulphate solution is employed in place of dilute
    acid, a similar series of chemical reactions occur, except that
    the zinc is liberated instead of hydrogen.

Daniell cells are used especially for electroplating, electrotyping and
telegraphic work. The electromotive force of a single cell is 1.079 volts.

=Directions for Making a Daniell Cell.=--The simple Daniell cell shown in
fig. 52 may be easily made as follows: The outer vessel A, consists of a
glass jar (an ordinary glass jam jar will do) containing a solution of
sulphuric acid (1 part in 12 to 20 parts of water), and a zinc rod B.

Inside the jar is placed a porous pot C containing a strip of thin sheet
copper D, and a saturated solution of sulphate of copper (also called
“blue stone” and “blue vitrol”).

The zinc is preferably of the Leclanche form, which will be found to be
cleaner, more durable, and cheaper than a zinc sheet. The porous pot
should be dipped in melted paraffin wax, both top and bottom, to prevent
the solution mingling too freely and “creeping.” A few crystals of copper
sulphate are placed in the pot as shown.

[Illustration: FIG. 52.--Simple Daniell cell for closed circuit work. To
maintain a constant current for an indefinite time, it is only necessary
to maintain the supply of copper crystals and zinc. The cell as shown in
the figure is easily made by following the direction given in the
accompanying text.]

In mixing the sulphuric acid and water, _the acid should be added to the
water--never the reverse._ Zinc sulphate is sometimes used instead, as it
reduces the wasteful consumption of the zinc, but it should be pure.

With care the cell will last for weeks. When it weakens or “runs down,” an
addition of sulphuric acid to the outer jar and a few more crystals
placed in the porous pot will put the cell in good condition.

[Illustration: FIG. 53.--Daniell gravity cell, “crowfoot” pattern. This is
a two fluid cell in which gravity instead of a porous cup is depended upon
to keep the liquids separate. The two solutions consist of copper sulphate
and dilute sulphuric acid, the elements being made of zinc and copper.]

=Gravity Cells.=--In a two liquid cell, instead of employing a porous cell
to keep the two liquids separate, it is possible, where one of the liquids
is heavier than the other, to arrange that the heavier liquid shall form a
stratum at the bottom of the cell, the lighter floating upon it. Such
arrangements are called _gravity cells_; but the separation is never
perfect, the heavy liquid slowly diffusing upwards.

=Daniell Gravity Cell.=--In this cell, shown in fig. 53, the same elements
are used as in the ordinary Daniell cell, but the porous pot is dispensed
with, the two solutions being separated by the action of gravity as
explained in the preceding paragraph.

[Illustration: FIG. 54.--Partz acid gravity cell. In this form of cell,
the electrolyte which surrounds the zinc is either magnesium sulphate or
common salt. The depolarizer is a bichromate solution which surrounds the
perforated carbon plate located in the bottom of the jar. A vertical
carbon rod fits snugly into the tapered hole in the carbon plate, and
extends through the cover forming the positive pole. The depolarizer,
being heavier than the electrolyte, remains at the bottom of the jar, and
the two liquids are thus kept separate. This depolarizer is placed on the
market in the form of crystals, known as sulpho-chromic salt, made by the
action of sulphuric acid upon chromic acid. When dissolved, its action is
similar to that of the chromic acid solution. After the cell has been set
up with everything else in place, the crystals are introduced into the
solution, near the bottom of the jar, through the vertical glass tube
shown, and slowly dissolve and diffuse over the surface of the carbon
plate. When the cell current weakens a few tablespoonfuls of the salt
introduced through the tube will restore the current to its normal value.
The cell should remain undisturbed to prevent the solution from mixing.
Its electromotive force is from 1.9 to 2 volts, and the 6 in. × 8 in. size
has an internal resistance of about .5 ohm. Since the depolarizer is quite
effective, the cell may be used on open or closed circuit work.]

The copper sulphate solution, being the heavier of the two, rests at the
bottom of the battery jar, while the dilute sulphuric acid remains at the
top. To suit this arrangement the copper and zinc elements are located as
shown, the copper elements being at the bottom, and the zinc element,
shaped like a crow’s foot (hence the name “crowfoot cell”) is suspended at
the top.

The absence of the porous pot decreases the internal resistance, but the
electromotive force is the same as in the ordinary type of Daniell cell.

[Illustration: FIG. 55.--Wheelock cell; the elements are carbon and zinc.
To set up, place the grid in the bottom of the jar and fill its two
troughs each about half full of mercury. Place the porous cell in position
on the grid so that it sits perfectly upright, resting in the recess of
the latter. The zincs stand with lower ends resting in mercury in the
troughs of the grid. Into the porous cell, to a height of _only
two-thirds_ full, pour solution consisting of equal parts water and
sulphuric acid, by measure. Add to this 1/2 pound nitrate soda, 1 ounce
chromic acid. This solution may be made up in the above proportion and
kept in covered receptacle in any desired quantity, ready for use. In the
outer jar for 6 × 8 size, 2-1/2 pints of water, and 1/2 gill sulphuric
acid, 1 part sulphuric acid to 20 parts water, or as much sulphuric acid
as it will take without boiling. When a charge becomes exhausted it may be
renewed by adding sulphuric acid and salts in the proportions given above,
after drawing out with syringe enough of the old solutions to make room
for the additions, but the best action is obtained with entirely new
solutions. Zincs must be kept thoroughly amalgamated by keeping a good
supply of mercury in the troughs.]

When a current is produced by a Daniell cell:

  1. Copper is deposited on the copper plate;
  2. Copper sulphate is consumed;
  3. The sulphuric acid remains unchanged in quantity;
  4. Zinc sulphate is formed;
  5. Zinc is consumed.

    If, however, the copper sulphate solution be too weak, the water
    is decomposed instead of the copper sulphate, and hydrogen is
    deposited on the copper plate. This deposit of hydrogen lowers
    the voltage, hence care should be taken to maintain an adequate
    supply of copper sulphate.

The voltage of a Daniell cell varies from about 1.07 volt to 1.14 volt,
according to the density of the copper sulphate solution and the amount of
zinc sulphate present in the dilute sulphuric acid.

=“Dry” Cells.=--It is often necessary to use cells in places where there
is considerable jarring or motion, as for automobile or marine ignition.
The ordinary cell is not well adapted to this service on account of the
liability of spilling the electrolyte, hence, the introduction of the
so-called dry cell.

A dry cell is composed of two elements, usually zinc and carbon, and a
liquid electrolyte. A zinc cup closed at the bottom and open at the top
forms the negative electrode; this is lined with several layers of
blotting paper or other absorbing material.

The positive electrode consists of a carbon rod placed in the center of
the cup; the space between is filled with carbon--ground coke and dioxide
of manganese mixed with an absorbent material. This filling is moistened
with a liquid, generally sal-ammoniac. The top of the cell is closed with
pitch to prevent leakage and evaporation. A binding post for holding the
wire connections is attached to each electrode and each cell is placed in
a paper box to protect the zincs of adjacent cells from coming into
contact with each other when finally connected together to form a
battery.

=Points Relating to Dry Cells.=--The following instructions on the care
and operation of dry cells should be carefully noted and followed to get
the best results:

[Illustration: FIGS. 56 and 57.--Round and rectangular types of the
so-called “dry” cell.]

    1. In renewing dry cells (or any other kind of cell), a greater
    number should never be put in series than was originally
    required to do the work, because the additional cells increase
    the voltage beyond that required, which causes more current than
    is necessary to flow through the coil. This increased current
    flow shortens the life of the battery.

    2. In connecting dry cells in places where there is vibration,
    heavy copper wire should not be used, because vibration will
    cause it to break.

    3. Water should not be allowed to come in contact with the paper
    covers of the cells because they form the insulation, hence,
    when moist, current will leak across from one cell to another,
    resulting in running down the battery.

    4. Dry cells will deteriorate when not in use, making it
    necessary to renew them about every sixty days. The reason dry
    cells deteriorate is because the moisture evaporates. Freezing,
    exposure to heat, and vibration which loosens the sealing,
    causes the evaporation.

    5. Weak cells can be strengthened somewhat by removing the paper
    jacket, punching the metal cup full of small holes, and then
    placing in a weak solution of sal-ammoniac, allowing the cells
    to absorb all they will take up. This is only to be recommended
    in cases of emergency when they are hard to get.

[Illustration: FIGS. 58 to 63.--Various zincs; fig. 58 Fuller; fig. 59
Daniell; fig. 60 Leclanche square; fig. 61 Leclanche round; fig. 62
Sampson; fig. 63, bottle.]

    6. The average voltage of a dry cell when new is one and
    one-half volts, while the amperage ranges from about twenty-five
    to fifty amperes according to size.

    7. A dry cell when fresh should show from =20= to =25= amperes
    when tested; the date of manufacture should also be noted as
    fresh cells are most efficient.

    8. Dry cells should be tested with an ammeter, care being taken
    to do it quickly as the ammeter being of a very low resistance
    short circuits the cell. A volt meter is not used in testing
    because, while the cells are not giving out current, their
    voltage remains practically the same, and a cell that is very
    weak will show nearly full voltage. When no ammeter is at hand,
    the battery current may be tested by disconnecting the end of
    one of the terminal wires and snapping it across the binding
    post of the other terminal; the intensity of the spark produced
    will indicate the condition of the battery.

=Points Relating to the Care of Cells.=--To get the best results from
primary cells, they should receive proper attention and be maintained in
good condition. The instructions here given should be carefully followed.

[Illustration: FIGS. 64 to 66: Various carbons; fig. 61 Cylindrical form;
fig. 65 Calland star; fig. 66, wheel.]

=Cleanliness.=--In the care of batteries, cleanliness is essential in
order to secure best results. Zincs and coppers should be thoroughly
cleaned every time a cell is taken out of use. The zinc, after being
thoroughly cleaned, should be rubbed with a little mercury. This prevents
local action. Porous cups should be soaked in clean water four or five
hours and then wiped dry.

The terminals of each cell should be thoroughly cleansed and scraped
bright so as to get good contact of the connecting wires and thus avoid
extra resistance in the circuit.

=Separating the Elements.=--Obviously the positive and negative elements
of a cell must not be in contact within the exciting fluid; they should be
separated by a space of 3/8 to 1/2 inch. In the case of cells without
porous cups, periodic attention must be given to ensure this condition
being maintained.

[Illustration: FIGS. 67 to 69.--Various zincs: fig. 67 Crowfoot; fig. 68
Lockwood; fig. 69 fire alarm.]

=Creeping.=--As evaporation of the electrolyte takes place in a cell, it
increases in strength, and crystals are left on the sides of the jar
previously wetted by the solution, the action being very marked when the
solution is a saturated one. The space between these crystals and the side
of the jar acts as a number of capillary tubes, and draws up more liquid,
which itself evaporates and deposits crystals above the former ones. So
that finally the film of crystals passes over the edge of the jar and
forms on the outside, thus making a kind of syphon which draws off the
liquid. This action may, to a great extent, be prevented by warming the
edges of the glass, or stoneware, jars, and of the porous pots, before the
cells are made up, and dipping them while warm into some paraffin wax
melted in warm oil, a precaution that should always be carried out when a
dense solution of zinc sulphate is employed in the cell.

=Amalgamated Zinc.=--To “amalgamate” a piece of zinc, dip it into dilute
sulphuric acid to clean its surface, then rub a little mercury over it by
means of a piece of rag tied on to the end of a stick, and lastly, leave
the zinc standing for a short time in a dish to catch the surplus mercury
as it drains off.

[Illustration: FIGS. 70 and 71.--Two forms of copper element: fig. 70,
regular form for crowfoot cell; fig. 71, signal pan bottom copper.]

The action of the amalgamated zinc is not well understood; by some it is
considered that amalgamating the zinc prevents local currents by the
amalgam _mechanically_ covering up the impurities on the surface of the
zinc and preventing their coming into contact with the liquid. By others
it is thought that amalgamating the zinc protects it from local action by
causing a film of hydrogen gas to adhere to it. This theory is based on
the fact that while no action takes place when amalgamated zinc is placed
in dilute sulphuric acid at ordinary atmospheric pressure, the creation of
a vacuum above the liquid causes a rapid evolution of hydrogen, which,
however, stops on the readmission of the air.

Amalgamating a zinc causes it to act as a somewhat more positive substance
than before, therefore the voltage of a cell containing amalgamated zinc
is slightly higher than that of a cell constructed with unamalgamated
zinc.

[Illustration: FIG. 72.--Diagram of a series battery connection: four
cells are shown connected by this method. If the cell voltage be one and
one-half volts, the pressure between the (+) and (-) terminals of the
_battery_ is equal to the product of the voltage of a single cell
multiplied by the number of cells. For four cells it is equal to six
volts.]

The addition of a very small amount of zinc to mercury causes the mercury
to act as if it were zinc alone, arising perhaps from the amalgam having
the effect of bringing the zinc to the surface.

=Battery Connections.=--There are three methods of connecting cells to
form a battery; they may be connected:

  1. In series;
  2. In parallel;
  3. In series multiple.

A series connection consists in joining the positive pole of one cell to
the negative pole of the other, as shown in fig. 72; this adds the voltage
of each cell.

    Thus, connecting in series four cells of one and one-half volts
    each will give a total of six volts.

Fig. 73 illustrates a parallel or multiple connection; this is made by
connecting the positive terminal of one cell with the positive terminal of
another cell and the negative terminal of the first cell with the negative
terminal of the second cell.

[Illustration: FIG. 73.--Diagram of a multiple or parallel connection.
When connected in this manner the voltage of the battery is the same as
that of a single cell, but the current is equal to the amperage of a
single cell multiplied by the number of cells. Thus with 1-1/2 volt 15
ampere dry cells, the combination or battery connected as shown would give
4 × 15 = 60 amperes at a pressure of 1-1/2 volts.]

[Illustration: FIG. 74.--Diagram of a series multiple connection. Two sets
of cells are connected in series and the two batteries thus formed,
connected in parallel. The pressure equals the voltage of one cell,
multiplied by the number of cells in one battery, and the amperage, that
of one cell multiplied by the number of batteries. This form of connection
is objectionable unless all the cells be of equal strength. If old cells
be placed on one side and new cells on the other, current will flow (as in
fig. 75) from the stronger through the weaker until the pressure of all
the cells thus becomes equal. This process therefore wastes some of the
energy of the strong cells.]

_A paralleled or multiple connection adds the amperage of each cell; that
is, the amperage of the battery will equal the sum of the amperage of each
cell._

    For instance, four cells of twenty-five amperes each would give
    a total of one hundred amperes when connected in parallel.

A series multiple connection, fig. 74, consists of two series sets of
cells connected in parallel. In series multiple connections the voltage of
each set of cells or battery must be equal, or the batteries will be
weakened, hence each battery of a series multiple connection should
contain the same number of cells.

_The voltage of a series multiple connection is equal to the voltage of
one cell multiplied by the number of cells in one battery, and the
amperage is equal to the amperage of one cell multiplied by the number of
batteries._

[Illustration: FIG. 75.--Diagram to illustrate incorrect wiring. The
current pressure of the six cell battery being greater than that of the
smaller unit, current will flow from the former through the latter until
the pressure of the six cells is equal to that of the four cells.]

Fig. 75 shows an incorrect method of wiring in series multiple connection.
If the circuit be open, the six cells, on account of having more
electromotive force than the four cells, will overpower them and cause a
current to flow in the direction indicated by the arrows until the
pressure of the six cells has dropped to that of the four. This will use
up the energy of the six cells, but will not weaken the four cell battery.
This action can be corrected by placing a two-way switch in the circuit at
the junction of the two negative terminals so that only one battery can be
used at a time.




                               CHAPTER V

                       CONDUCTORS AND INSULATORS


Bodies differ from each other in a striking manner in the freedom with
which the electric current moves upon them. If the electric current be
imparted to a certain portion of the surface of glass or wax, it will be
confined strictly to that portion of the surface which originally receives
it, by contact with the source of electricity; but if it be in like manner
imparted to a portion of the surface of a metallic body, it will
instantaneously diffuse itself uniformly over the entire extent of such
metallic surface, exactly as water would spread itself uniformly over a
level surface on which it is poured.[3]

Bodies in which the electric current moves freely are called _conductors_,
and those in which it does not move freely are called _insulators_. There
is, however, no substance so good a conductor as to be devoid of
resistance, and no substance of such high resistance as to be a
_non-conductor_.

_Mention should be made here of the misuse of the word non-conductor; the
so-called “non-conductors” are properly termed insulators._

The bodies named in the following series possess conducting power in
different degrees in the order in which they stand, the most efficient
conductor being first, and the most efficient insulator being last in the
list.

=TABLE OF CONDUCTORS AND INSULATORS=

                         { Silver
                         { Copper
                         { Aluminum
                         { Zinc
                         { Brass (according to composition)
                         { Platinum
                         { Iron
  Good conductors[4]     { Nickel
  (metals and alloys)    { Tin
                         { Lead
                         { German silver (copper 2 parts, zinc 1,
                             nickel 1)
                         { Platinoid (German silver 49 parts, tungsten 1
                             part)
                         { Antimony
                         { Mercury
                         { Bismuth.

                         { Charcoal and coke
                         { Carbon
                         { Plumbago
                         { Acid solutions
  Fair conductors        { Sea water
                         { Saline solutions
                         { Metallic ores
                         { Living vegetable substances
                         { Moist earth.

                         { Water
                         { The body
                         { Flame
                         { Linen
                         { Cotton
  Partial conductors     { Mahogany    }
                         { Pine        }  Dry woods
                         { Rosewood    }
                         { Lignum Vitæ }
                         { Teak
                         { Marble.

                         { Slate
                         { Oils
                         { Porcelain
                         { Dry leather
                         { Dry paper
                         { Wool
                         { Silk
                         { Sealing wax
                         { Sulphur
  Insulators, or         { Resin
  so-called              { Gutta-percha
  non-conductors.        { Shellac
                         { Ebonite
                         { Mica
                         { Jet
                         { Amber
                         { Paraffin wax
                         { Glass (varies with quality)
                         { _Dry_ air.

[Illustration: FIGS. 76 to 78.--Various covered wires. fig. 76, single;
fig. 77, duplex; fig. 78, automobile high tension cable.]

The earth is a good conductor; much difficulty is frequently experienced
by the wires making contact with some substance that will conduct the
electricity to the earth. This is called “grounding.”

[Illustration: FIGS. 79 to 81.--Standard porcelain insulators. Fig. 79,
tube type; figs. 80 and 81, grooved insulators.]

=Mode of Transmission.=--The exact nature of electricity is not known, yet
the laws governing its action, under various conditions are well
understood, just as the laws of gravitation are known, although the
constitution of gravity cannot be defined. Electricity, though not a
substance, can be associated with matter, and its transmission requires
energy. While it is neither a gas nor a liquid, its behavior sometimes is
similar to that of a fluid so that it is said to “flow” through a
conductor. This expression of flowing does not really mean that there is
an actual movement in the wire, similar to the flow of water in a pipe,
but is a convenient expression for the phenomena involved.

=Effect of Heat.=--The conducting power of bodies is affected in different
ways by their temperature. In the metals it is diminished by elevation of
temperature; but in all other bodies, and especially in liquids, it is
augmented. Some substances which are insulators in the solid state, become
conductors when fused.

    Sir H. Davy found that glass raised to a red heat became a
    conductor; and that sealing wax, pitch, amber, shellac, sulphur,
    and wax, became conductors when liquefied by heat.

=Heating Effect of the Current.=--If a current of electricity pass over a
conductor, no change in the heat condition of the conductor will be
observed as long as its transverse section is so considerable as to leave
sufficient space for the free passage of the current. But, if this
thickness be diminished, or the quantity of electricity passing over it be
augmented, or, in general, if the ratio of the electricity to the
magnitude of the space afforded to it be increased, the conductor will be
found to undergo an elevation of temperature, which will be greater, the
greater the quantity of the electricity and the less the space supplied
for its passage.

[Illustration: FIG. 82.--Standard two wire porcelain cleat.]

These heat effects are manifested in different degrees in different
metals, according to their varying conducting powers.

The poorest conductors, such as platinum and iron, suffer much greater
changes of temperature by the same charge than the best conductors, such
as gold and copper.

The charge of electricity, which only elevates the temperature of one
conductor a small amount, will sometimes render another incandescent, and
will vaporize a third.

=Insulators=.--The term insulator is used in two ways: 1, as in insulating
substance or medium, and 2, as a specially formed piece of some insulating
material, such as glass, porcelain, etc. No substance has the power of
absolutely preventing the passage of electric currents between conductors
but many have sufficient insulating power for practical purposes. The
properties to be desired in a good insulating material are:

  1. Permanence;
  2. High power of resisting breakdown;
  3. Mechanical strength;
  4. Fairly high dielectric or insulation resistance;
  5. Special qualities for the use to which the material is to be put.

Permanence is the most important quality, and is the one least easily
attained. The power of resisting breakdown is a complex quality, for it is
not solely dependent on mere puncturing pressure, but also on mechanical
goodness, and to a certain extent on the insulation resistance. It cannot
be easily determined by a simple laboratory test, but must be found by
experience of actual service conditions.

=Impregnating Compounds.=--These are used for the treatment of fibrous
materials. They increase the insulating properties of the fibrous
materials, render them moisture proof and able to withstand the effect of
heat with less rapid deterioration.

When wires or cables are to be used under water, they must be made
impervious, and great care must be taken to prevent the water penetrating
and thus injuring the insulation.

=Water as a Conductor.=--Water, whether in the liquid or vaporous form, is
a conductor, though of an order greatly inferior to the metals. This fact
is of great importance in electrical phenomena. The atmosphere contains,
suspended in it, always more or less aqueous vapor, the presence of which
impairs its insulating property.

The best insulators become less efficient if their surface be moist, the
electricity passing by the conducting power of the moisture. This
circumstance also shows why it is necessary to dry previously the bodies
on which it is desired to develop electricity by friction.




                               CHAPTER VI

                      RESISTANCE AND CONDUCTIVITY


_Resistance is that property of a substance that opposes the flow of an
electric current through it._

The practical electrician has to measure electrical resistance,
electromotive forces, and the capacities of condensers. Each of these
several quantities is measured by comparison with ascertained standards,
the particular methods of comparison varying, however, to meet the
circumstances of the case.

Ohm’s law states that the strength of a current due to an electromotive
force falls off in proportion as the resistance in the circuit increases.
It is therefore possible to compare two resistances with one another by
finding out in what proportion each will cause the current of a constant
battery to fall off.[5]

_Silver is taken as the standard, with the percentage of 100, and the
conductivity of all other metals is expressed in hundredths of the
conductivity of silver._

=Conductivity of Metals and Liquids.=--The metals in general, conduct
well, hence their resistance is small, but metal wires must not be too
thin or too long, or they will resist too much, and permit only a feeble
current to pass through them. The liquids in the battery do not conduct
nearly so well as the metals, and different liquids have different
resistances. Pure water will hardly conduct at all, unless the voltage be
very high.

Salt and saltpetre dissolved in water are good conductors, and so are
dilute acids, though strong sulphuric acid is a bad conductor. Gases are
bad conductors.

=Effect of Heat.=--Another very important fact concerning the resistance
of conductors is that the resistance in general increases with the
temperature. While this fact is true regarding metals, it does not apply
to non-metals. The resistance of different metals does not increase in the
same proportion. Iron at 100 degrees C, has lost 39 per cent. of the
conducting power it possessed at zero, while silver loses but 23 per cent.

=Laws of Electrical Resistance.=--Resistances in a circuit may be of two
kinds:

1. Resistance of the conductors;

2. Resistance due to imperfect contact.

    The latter kind of resistance is affected by pressure, for when
    the surfaces of two conductors are brought into more intimate
    contact the current passes more freely from one conductor to the
    other.

The following are the laws of the resistance of conductors:

1. _The resistance of a conducting wire is proportional to its length._

    If the resistance of a mile of telegraph wire be 13 ohms, that
    of fifty miles will be 50 × 13 = 650 ohms.

2. _The resistance of a conducting wire is inversely proportional to the
area of its cross section_, and therefore in the usual round wires _is
inversely proportional to the square of its diameter._

    Ordinary telegraph wire is about 1/6th of an inch thick; a wire
    twice as thick would conduct four times as well, having four
    times the area of cross section; hence an equal length of it
    would have only 1/4th the resistance.

3. _The resistance of a conducting wire of given length and thickness
depends upon_ the material of which it is made--that is, upon the specific
resistance _of the material_.

=Conductivity.=--This is _the inverse of resistance_. The term expresses
the capability of a substance to conduct the electric current.

If the symbol Y represent the conductivity of a substance, and I the
current then:

   I/Y = its resistance;

and if R represent the resistance of a substance, then

   I/R = its conductivity.

Good conductors of heat are also good conductors of electricity.

=Specific Conductivity.=--The figure which indicates the relation between
one substance and another as to their capacity to conduct electricity is
called _specific_ or _relative conductivity_. Taking the specific
conductivity of silver as 100, that of pure copper is 96.

The specific resistance of a substance is the reverse of its relative
conductivity. The specific resistance of a metal is generally expressed in
millionths of an ohm as the resistance of a centimeter cube of that metal
between opposite sides.

The following table gives the data for a few metals:

                          Specific Resistance               Specific
  Substance.                in Microhms.                  Conductivity.

  Silver                        1.609                        100.
  Copper                        1.642                         96.
  Gold                          2.154                         74.
  Iron (soft)                   9.827                         16.
  Lead                         19.847                          8.
  German Silver                21.470                          7.5
  Mercury (liquid)             96.146                          1.6

The specific resistance of copper is therefore:

  1.642 / 1,000,000 ohms, or 1.642 microhms.[6]

=Divided Circuits.=--If a circuit be divided, as in fig. 83, into two
branches at A, uniting again at B, the current will also be divided, part
flowing through one branch and part through the other.

_The relative strength of current in the two branches will be proportional
to their conductivities._

This law will hold good for any number of branch resistances connected
between A and B. Conductivity is, as shown before, the reciprocal of
resistance.

    EXAMPLE--If, in fig 83, the resistance of R = 10 ohms, and R′ =
    20 ohms, the current through R will be to the current through R′
    as 1/10 to 1/20; or, as 2:1, or, in other words, 2/3 of the
    total current will pass through R and 1/3 through R′. The joint
    resistance of the two branches between A and B will be less than
    the resistance of either branch singly, because the current has
    increased facilities for travel. In fact, the joint conductivity
    will be the sum of the two separate conductivities.

    Taking again the resistance of R = 10 ohms and R′ = 20 ohms, the
    joint conductivity is

    1/10 + 1/20 = 3/20

    and the joint resistance is equal to the reciprocal[7] of 3/20

    or 6-2/3

[Illustration: FIG. 83.--Divided circuit with two conductors _in
parallel_.]

In most cases the resistance of the different branches will be alike. This
simplifies the calculations considerably. Take, for instance, two branches
of 100 ohms resistance each and find the joint resistance.

    SOLUTION: 1/100 + 1/100 = 2/100; the reciprocal is 100/2 = 50
    ohms, or, in other words, the joint resistance is one-half of
    the resistance of a single branch, and each branch, of course,
    will carry one-half of the total current in amperes.

    With three branches of equal resistance, the joint resistance
    will be 1/3; with four branches 1/4; with 100 branches 1/100 of
    the resistance of a single branch.

[Illustration: FIG. 84.--Hydraulic analogy for divided circuits. In the
system of pipes shown, water flows from A B to C D through the six
vertical pipes 1 to 6, the greatest amount going through the one which
offers the least resistance. If pipes 1 to 6 all have the same dimensions,
equal quantities of water will flow through them. It follows that the
resistance which the water encounters diminishes with the increase in the
number of pipes between A B and C D. The electrical circuit presents the
same conditions: the greater the number of parallel connections
(corresponding to the pipes 1 to 6) the less is the resistance encountered
by the current.]

If, for instance, the resistance of an incandescent lamp hot be 180 ohms,
the joint resistance of 100 such lamps connected in multiple is

  180/100 = 1.8 ohms.

If the electromotive force of the system is to be, say 110 volts, then,
according to Ohm’s law, the current for 100 lamps is:

  110/1.8 = 61.11 amperes.

giving for each lamp a current of

  110/180 = .61 ampere.

In the case of two branches only, the following rule may be applied also:

_Multiply the two resistances and divide the product by their sum._

Written as a formula:

  Joint resistance = (R × R′)/(R + R′)

    Again, assuming that R = 10 ohms and R′ = 20 ohms:

    Joint resistance (10 × 20)/(10 + 20) = 200/30 = 6-2/3 ohms.

This rule _cannot_ be employed for more than two branches at a time.

    EXAMPLE--A current of 42 amperes flows through three conductors
    in _parallel_ of 5, 10 and 20 ohms resistance respectively. Find
    the current in each conductor.

    SOLUTION: Joint Conductance = 1/5 + 1/10 + 1/20 = 7/20.

    Supposing the current to be divided into 7 parts, 4 of these
    parts would flow in the first conductor 2 in the second and 1 in
    the third.

    The whole current is 42 amperes.

    4/7 of 42 = 24.
    2/7 of 42 = 12.
    1/7 of 42 = 6.

    Current in first conductor = 24 amperes. }
       “    “  second  “       = 12  “       } Ans.
       “    “  third   “       = 6   “       }




                              CHAPTER VII

                    ELECTRICAL AND MECHANICAL ENERGY


The production of electricity is simply a transformation of energy from
one form into another, usually mechanical energy is changed into
electrical energy and a dynamo is simply a device for effecting the
transformation.

    Prof. Fessenden truly remarks there are two independent
    properties of matter--gravity and inertia--and these give two
    ways of defining force and energy.

It should always be remembered that electricity is something real,
although not easily defined. And then, too, while it is not matter and not
energy, yet under proper conditions (it having the power of doing work) it
is convenient to speak of its performances as electric energy. The
following questions and answers, although few in number, may present the
subject with clearness.

=Ques. What is energy?=

Ans. Energy is the capacity for doing work.

    Steam under pressure is an example, a spring bent ready to be
    released is another form, again, water stored in an elevated
    tank has capacity for doing work. These examples illustrate
    _potential energy_, as distinguished from _kinetic energy_.
    Potential energy may be defined as _energy due to position_, and
    kinetic energy, as _energy due to momentum_.

=Ques. What is matter?=

Ans. Matter is anything occupying space, and which prevents other matter
occupying the same space at the same time.

=Ques. What name is given the smallest quantity of matter which can
exist?=

Ans. The atom.

    An atom means that which cannot be cut, scratched, or changed
    in form and that cannot be affected by heat or cold or any known
    force; although inconceivably small, atoms possess a definite
    size and mass.

=Ques. What is a molecule?=

Ans. A molecule is composed of two or more atoms.

=Ques. What is the behaviour of these minute bodies?=

Ans. They are perpetually in motion, vibrating with incredible velocities.

=Ques. Why at this point are definitions of energy and of matter most
useful?=

Ans. Because, as stated, all electric action is an exhibition of energy,
and energy must act through matter as its medium.

=Ques. What is the difference between electricity and magnetism?=[8]

Ans. The ultimate nature of neither is known. There are, however, some
differences. To sustain a current of electricity requires energy. To
sustain magnetism requires no energy. A current of electricity is always
accompanied by a magnetic field of peculiar form. Magnetism alone cannot
produce electricity. Electricity can do work; but magnetism cannot in the
same sense--and alike with electricity, neither can it exist without
contact with matter.

=Ques. How is energy transmitted from one part of a material substance to
another?=

Ans. Gradually and successively. It requires a medium and also time.

=Ques. What is the principal use or function in mechanics of electricity?=

Ans. It is purely that of transmission. It corresponds to ropes, shafts
and fluids as a medium of conveying and translating power or work.

=Ques. What is work?=

Ans. Work is the overcoming of resistance through a certain distance.

    As a quantity of water moving from a higher to a lower level
    will do work, so also will a quantity of electricity falling
    through a difference of potential.

=Ques. How is work measured?=

Ans. In foot pounds.

=Ques. What is a foot pound?=

Ans. The amount of work done in raising a weight of one pound one foot or
the equivalent, overcoming a pressure of one pound through a distance of
one foot.

=Ques. What is the electrical unit of work?=

Ans. The _volt-coulomb_.

    A volt-coulomb of work is performed when one ampere of current
    flows for one second in a circuit whose resistance is one ohm,
    when the pressure is one volt.

=The Ampere-Hour.=--A gallon of water may be drawn from a hydrant in a
minute, or in an hour; it is still one gallon. So in electricity, a given
amount of the current, say one _coulomb_, may be obtained in a second or
in an hour.

_The ampere is the unit rate of flow._

What is called the electric current is simply the relation of any quantity
of electricity passed to the time it is passing; that is

    quantity in coulombs = current in amperes × time in seconds, or
    simply

    coulomb = ampere × second.

Again:

    10 coulombs = 2 amperes × 5 seconds = 10 amperes × 1 second =
    1 ampere × 10 seconds, etc.

One _ampere-hour_ is simply another way of saying 3,600 coulombs. Of
course 3,600 coulombs of electricity may be obtained in any desired time.
It all depends on the rate of flow or the current strength in amperes.

    For instance, 2 amperes in 1/2 hour, or 4 amperes in 1/4 hour
    will also give one ampere-hour of 3,600 coulombs.

It is well to keep the distinction between coulombs and amperes in mind,
as even in text books very lately published these units are confounded. To
illustrate further the difference between coulombs and amperes, the
following example is given.

    It is sometimes estimated that the quantity of electricity in a
    flash of lightning is 1/10 coulomb, and the duration of the
    discharge 1/20000 part of a second. What is the current in
    amperes?

    Now since

    coulombs = amperes × seconds                            (1)

    solving (1) for the current,

    amperes = coulombs/seconds                              (2)

    substituting the given values in (2),

    amperes= (1/10) / (1/20000) = 2000

=Power.=--The term power means _the rate at which work is done;_ it is
usually expressed as _the number of foot pounds done in one minute_, that
is

  power = (foot pounds) / minutes

_Power exerted for a certain time produces work._

=Ques. What is the mechanical unit of power?=

Ans. The horse power.

=Ques. What is one horse power?=

Ans. 33,000 foot pounds per minute.

    The unit is due to James Watt as being the power of a strong
    London draught horse to do work during a short interval and used
    by him to measure the power of his steam engines. One horse
    power = 33,000 ft. lbs. per minute = 550 ft. lbs. per sec. =
    1,980,000 ft. lbs. per hour.

=Ques. What is one horse power hour?=

Ans. Work done at the rate of one horse power for one hour.

=Ques. What is the electrical unit of power?=

Ans. The watt.

=Ques. What is a watt?=

Ans. It is the power due to a current of one ampere flowing at a pressure
of one volt. One watt = one ampere × one volt. It is equal to one joule
per second.

=Ques. What is a kilowatt?=

Ans. 1,000 watts.

=The Watt-Hour.=--The elements which may be measured are, however, not
only the volume of current, the unit of which is the ampere, and time, the
unit of which is the hour, but also the _pressure_, the unit of which is
the volt.

It is evident that a perfect system of electrical measurement should take
account of the total amount of energy consumed, and should depend not only
upon the volume of current, but _also upon the pressure_ at which the
current is applied.

The basis of such a system if provided in a unit which is the product of
the two units of current and pressure, and which is termed a _volt-ampere_
or _watt_.

_The watt-hour represents the amount of work done by an electric current
of one ampere strength flowing for one hour under a pressure of one
volt._

    EXAMPLE--An incandescent lamp taking one-half an ampere of
    current on a circuit having a pressure of 100 volts, or a lamp
    taking one ampere on a circuit having a pressure of 50 volts,
    would each be consuming 50 watts of energy, and this multiplied
    by the number of hours would give the total number of watt-hours
    for any definite time.

_The watt, then, is an accurate and complete unit of measurement and is
generally applicable to all forms of electrical consumption._

[Illustration: FIG. 85.--Tyndall’s experiment illustrating the production
of heat by friction. A brass tube about 7 inches in length and 3/4 of an
inch in diameter, is fixed on a small wheel. By means of a cord passing
round a much larger wheel, this tube can be rotated with any desired
velocity. The tube is three parts full of water, and is closed by a cork.
In making the experiment, the tube is pressed between a wooden clamp,
while the wheel is rotated with some rapidity. The water rapidly becomes
heated by the friction, and its temperature soon exceeds the boiling
point. The pressure caused by the formation of steam forces out the cork
and projects it to a height of several yards.]

    A watt of electrical energy corresponds to 1/746 of a horse
    power of mechanical energy; hence, if a lamp or motor require
    energy equivalent to 1/746 of a horse power for one hour, it
    might be said to take one watt-hour.

=Mechanical Equivalent of Heat.=--The eminent English physicist, James
Prescott Joule, worked for more than forty years in establishing the
relation between _heat_ and _mechanical work_; he stated the doctrine of
the conservation of energy and discovered the law, known as Joule’s law,
for determining the relation between the heat, current pressure, and time
in an electric circuit.

=Ques. What is heat?=

Ans. A form of energy.

    Heat is produced in the agitation of the molecules of
    matter--the energy expended in agitating these molecules is
    transformed into heat.

[Illustration: FIG. 86.--Joules’ experiment on the mechanical equivalent
of heat, in which he caused paddle-wheels to rotate in a vessel of water
by means of falling weights _W_. The amount of work done by gravity upon
the weights in causing them to descend through any distance _d_ was equal
to their weight _W_ times the distance. If the weights descended slowly
and uniformly, this work was all expended in overcoming the resistance of
the water to the motion of the paddle-wheels through it; that is, it was
wasted in eddy currents in the water. Joule measured the rise in the
temperature of the water and found that the mean of his three best trials
gave 427 gram meters as the amount of work required to develop enough heat
to raise a gram of water one degree. He then repeated the experiment,
substituting mercury for water, and obtained 425 gram meters as the work
necessary to produce a calorie of heat. The difference between these
numbers is less than was to have been expected from the unavoidable errors
in the observations. He then devised an arrangement in which the heat was
developed by the friction of iron on iron, and again obtained 425. This
corresponds to 772 foot pounds, but later experiments show that the
correct value is 778 foot pounds.]

=Ques. How is heat measured?=

Ans. In British thermal units (B.t.u.).

=Ques. What is the British thermal unit?=

Ans. The quantity of heat required to raise the temperature of 1 lb. of
pure water 1° Fahr., at or near 39.1° F., the temperature of maximum
density.

=Ques. What is the mechanical equivalent of heat?=

Ans. The number of foot pounds of mechanical energy equivalent to one
British thermal unit.

    Joule’s experiments 1843-50 gave the figure 772 ft. lbs. which
    is known as Joule’s equivalent. Later experiments gave higher
    figures, and _the present accepted value is 778 ft. lbs._, that
    is: 1 B.t.u. = 778 ft. lbs.

=Electrical Horse Power.=--It is desirable to establish the relation
between _watts_ and _foot pounds_ in order to determine the _capacity_ of
an electric generator or motor in terms of _horse power._

One watt is equivalent to one joule per second or 60 joules per minute.
One joule in turn, is equivalent to .7374 ft. lbs., hence 60 joules equal:

  60 × .7374 = 44.244 ft. lbs.

Since one horse power = 33000 ft. lbs. per minute, the electrical
equivalent of one horse power is

  33000 ÷ 44.244 = 746 watts.

or,

  746 / 1000 = .746 kilowatts (K.W.)

Again, one kilowatt or 1000 watts is equivalent to

  1000 ÷ 746 = 1.34 horse power.

=The Farad.=--The measure constructed to hold a gallon of water may be
called the gallon measure. The capacity of a condenser which would contain
a charge of one coulomb under one volt pressure is the _farad._ It may
seem strange that there is a unit of quantity and another of capacity to
hold that quantity, when in the case of water the term “gallon” may
suffice for the measure and the liquid it can hold. Electricity in this
respect, however, corresponds to a _compressible fluid_ or a _gas_.

A gallon measure may hold a gallon of gas or ten; it depends entirely upon
the pressure. So a condenser of a certain size may hold any number of
coulombs, according to the electrical pressure.

The farad being inconveniently large for practical use, one-millionth of a
farad, called a _microfarad_, is generally adopted.




                              CHAPTER VIII

                         EFFECTS OF THE CURRENT


The term “electric current,” in the present state of our knowledge, should
be regarded as denoting the existence of a state of things in which
certain definite experimental effects are produced, for some of which
there certainly is no analogy exhibited in ordinary hydraulic currents.
The following are the most important of these effects:

  1. Thermal effect;
  2. Magnetic effect;
  3. Chemical effect.

It is rather to these effects than to any imaginary current flow in the
conductor that the mind of the reader should be directed.

With this preliminary caution, which should never be lost sight of, the
use of familiar words and expressions connected with the flow of water in
pipes is justified in order to avoid roundabout and cumbrous phrases
which, though perhaps more nearly in accord with present knowledge of the
facts, would not tend to clearness or conciseness.

The three most important effects of the current just mentioned, may be
presented in more detail as follows:

1. The _Thermal effect:_--

    The conductor along which the current flows becomes heated. The
    rise of temperature may be small or great according to
    circumstances, but some heat is always produced.

2. The _Magnetic effect;_

    The space both outside and inside the substance of the
    conductor, but more especially the former, becomes a “magnetic
    field” in which delicately pivoted or suspended magnetic needles
    will take up definite positions and magnetic materials will
    become magnetized.

[Illustration: FIG. 87.--Lenz’s apparatus for measuring the heat given off
by an electric current. It consisted of a wide mouthed stoppered bottle
fixed upside down, with its stopper, _b_ in a wooden box; the stopper was
perforated so as to give passage to two thick platinum wires, connected at
one end with binding screws, _s_, while their free ends were provided with
platinum cones by which the wires under investigation could be readily
affixed; the vessel contained alcohol, the temperature of which was
indicated by a thermometer fitted in a cork inserted in a hole made in the
bottom of the vessel. The current is passed through the platinum wires,
and its strength measured by means of a galvanometer interposed in the
circuit. By observing the increase of temperature in the thermometer in a
given time and knowing the weight of the alcohol, the mass of the wire,
the specific heat, and the calorimetric values of the vessel, and of the
thermometer, compared with alcohol, the heating effect which is produced
by the current in a given time can be calculated.]

3. The _Chemical effect;_--

    If the conductor be a liquid which is a chemical compound of a
    certain class called _electrolytes_, the liquid will be
    decomposed at the places where the current enters and leaves
    it.

=Thermal Effect.=--If a quantity of electricity were set flowing in a
closed circuit and the latter offered no _resistance_, it would flow
forever, just as a wagon set rolling along a circular railway would never
stop if there were no _friction_.

[Illustration: FIG. 88.--The Seebeck effect: If in a complete metallic
circuit having junctions of dissimilar metals, the junctions are at
different temperatures, then generally a steady current will flow in the
circuit as long as the differences of the temperatures of the junction is
maintained. To demonstrate this, a piece of copper K bent in the shape
seen in the figure, was placed on a block of bismuth A B, carrying a
pivoted magnetic needle N S; as soon as the equality of temperatures was
altered by either heating or cooling one of the junctions of the two
metals, the needle indicated a current which continued to flow as long as
the difference of temperature was maintained at the junctions. The
movement of the needle indicated the direction in which the current
flowed. If, for instance, the north junction B were heated, the N pole
moved eastwards, showing that at the heated junction the current flows
from the bismuth to the copper, at the cold junction from the copper to
the bismuth.]

When matter in motion is stopped by friction, the energy of its motion is
converted into heat by the friction thus causing the matter to come to
rest. Similarly, when electricity in motion, that is, an electric current
is stopped by resistance, the energy of its flow is transformed into heat
by the resistance of the circuit.

If the terminals of a battery be joined by a short thick wire of low
resistance, most of the heat will be developed in the battery, whereas, if
a thin wire of high resistance be used it will become hot, while the
battery itself will remain comparatively cool.

To investigate the development of heat by a current, Joule and Lenz used
instruments on the principle of fig. 87, in which a thin wire joined to
two stout conductors is enclosed within a glass vessel containing alcohol,
into which is placed a thermometer. The resistance of the wire being
known, its relation to the other resistances can be calculated. Joule
found that the number of heat units developed in a conductor is
proportional to:

  1. The resistance;
  2. The square of the current strength;
  3. The time that the current lasts.

Joules’ law may be stated as follows:

_The heat generated in a conductor by an electric current is proportional
to the resistance of the conductor, the time during which the current
flows, and the square of the strength of the current._

    The quantity of heat in calories may be calculated by use of the
    equation,

    calories per second = volts × amperes × .24.      (1)

    The total number of calories H developed in t seconds will be
    given by

    H = P.D. × C × t × .24.      (2)

    EXAMPLE--If a current of 10 amperes flows in a wire whose
    terminals are at a potential difference of 12 volts, how much
    heat will be developed in 5 minutes?

    Substituting in equation (2):

    10 × 12 × (60 × 5) × .24 = 8640 calories.

    Since by Ohm’s Law potential difference = I × R substituting IR
    for P.D. in (2)

    H = I^{2} R × t × .24

=Use of Heat from Electric Current.=--In the transmission of electricity
from place to place, it is very desirable that none of the energy be
expended in heating the conductor. Hence copper wires of the proper size
must be used.

In wiring a building for electric lights, the insurance rules require that
the wires be of a certain size and that they be put up in a certain
manner. Otherwise they will not insure a building against fire.

It is often desirable, however, to use the electric current for the
purpose of producing heat. The carbons of the arc and incandescent lamps
are intensely heated that they may produce light. Coils of German silver
wire or other high resistance wire are heated by the passage of a current
through them. In this manner the electric stove is made.

Soldering coppers, smoothing irons, and baking ovens are heated in a
similar manner.

=Magnetic Effect.=--An electric current flowing in a wire causes it to be
surrounded by a _magnetic field_, which consists of _lines of force_
encircling the wire. The field is strongest near the wire and diminishes
gradually in strength at increasing distances therefrom. The presence of
this magnetic field is shown by various experiments and the subject is
fully explained in chapter IX on _magnetism_.

=Chemical Effect.=--Pats van Trostwyk (1789) pointed out that an electric
discharge was capable of decomposing water; to show this he used gold
wires, which he allowed to dip in water, connecting one of them with the
inner, and another with the outer coating of a Leyden jar, and passing the
discharge through the water. The gas bubbles collected proved to consist
of oxygen and hydrogen gas.

Nicholson and Carlisle (1800) dipped a copper wire which was connected
with one of the poles of a voltaic pile into a drop of water, which
happened to be on the plate connected with the other pole; gas bubbles
appeared, and the drop of water became smaller and smaller.

    This experiment was repeated in a somewhat different manner, the
    brass wires from a pile being brought under a tube filled with
    water and closed at the top. Gas bubbles were produced by the
    wire in connection with the negative pole of the pile, and the
    water was observed to diminish gradually. At the positive wire,
    on the contrary, no gas came off, but the metal lost its
    metallic lustre, became dark, and finally crumbled away. The gas
    which had collected in the tube proved to be hydrogen; while on
    examining the black mass it was found that the constituents of
    brass, viz., copper and zinc, had become oxidized.

[Illustration: FIG. 89.--An electrolytic cell. The parts are: A, cell; B,
electrolyte; C, positive electrode or cathode; D, negative electrode or
cathode.[9]]

=Electrolysis.=--_Electric analysis_ or more briefly _electrolysis_ was
the term applied by Faraday to the process of decomposing a liquid by the
passage of a current of electricity through it.

The vessel containing the liquid is known as an _electrolytic cell._ In
fig. 89, A is the cell, which may be of glass or of any other suitable
material, and B is the liquid which is to be electrolyzed. Current enters
by the _positive electrode_ C, also known as the _anode_, traverses the
liquid, and leaves by the _negative electrode_, or _cathode_, D.

[Illustration: FIG. 90.--Modern apparatus for decomposing water by
electrolysis. Platinum electrodes P and P′ are placed at the bottom of two
upright tubes O and H, and are connected to the terminals T and T′ by
platinum wires, which are fused through the glass of the tubes. These
tubes have glass stop cocks S and S′ at their upper ends, and at their
lower ends are connected by a short glass tube, from the center of which
rises the large central tube which expands with a bulb at its upper end,
which is open at the top. The three tubes can be filled with acidulated
water from the central tube, the previously contained air being allowed to
escape through the stop cocks, which are afterwards closed. If it be so
filled, and the terminal T be attached to the positive and T′ to the
negative pole of a suitable battery, bubbles of gas will be observed to
rise from the plates P and P′, and finding their way to the top of the
respective tubes, will displace the liquid, which will be driven into the
open central tube. The gas rising from the anode P is oxygen (O), and that
rising from the cathode P′ is hydrogen (H). If the tubes are graduated,
the latter will be found to occupy about twice the volume of the former.
The proportion is theoretically 2 to 1; however, on account of the
different solubilities of the two gases in water, oxygen being the more
soluble of the two, is deficient in quantity.]

The passage of current through the water splits up its molecules into
their constituent atoms of oxygen and hydrogen, the former being given off
in bubbles at the anode, and the latter at the cathode.

When current is passed through a solution of copper sulphate between
platinum electrodes, the liquid is decomposed, atoms of copper being
deposited at the cathode, bubbles of oxygen being given off at the anode,
and sulphuric acid being formed in the liquid, which latter becomes more
and more acid as the copper is withdrawn.

[Illustration: FIG. 91.--Grotthuss’ theory of electrolysis. Grotthuss in
(1806), announced his theory that the molecules in an electrolyte have
their individual electro-positive and electro-negative atoms charged
positively and negatively respectively. In an ordinary liquid, for
instance in water, the molecules are arranged indifferently, like row 1,
with their positive and negative ends pointing in all directions. When the
charged plates A and B connected to the + and - poles of a battery are
inserted in the water, the molecules under the action of the laws of
electrostatic action turn as shown in row 2, so that all the hydrogen or
shaded ends (+) are turned towards the (-) plate B and all the oxygen or
unshaded ends (-) towards the (+) plate A. All along the row the
electrical forces are supposed to tear the molecules asunder, depositing H
on B and O on A. The atoms in the middle of the liquid, however,
recombine, for the hydrogen atoms in their journey towards B meet the
oxygen atoms travelling in the opposite direction, and we get the state of
affairs represented in row 3. The next step is to rotate once more the
atoms into the positions shown in row 2, and so on. In this way the theory
accounts for the products only appearing at the electrodes and not in the
body of the liquid.]

If, however, the anode be of copper instead of platinum, no sulphuric acid
will be formed, neither will oxygen be given off at the anode. As copper
is deposited at the cathode, an equal quantity will be dissolved at the
anode, so that the original constitution of the liquid is maintained.

The atoms separated from each other by the electric current were called
_ions_ by Faraday; those going to the anode being _anions_, and those
going to the cathode being _kathions_.

Anions are generally regarded as _electro-negative_, because they move as
if attracted to the positive electrode, while kathions are regarded as
_electro-positive_.

In order to explain the transfer of electricity and the transfer of matter
through the electrolyte, Grotthuss put forward the hypothesis that when
two metal plates at different potentials are placed in a cell, the effect
produced in the liquid is that the molecules of the liquid arrange
themselves in innumerable chains, as shown in fig. 91, in which every
molecule has its atoms pointing in a certain direction, the
electro-positive atom being attracted towards the cathode and the
electro-negative towards the anode. An interchange then takes place all
along the line, the free atoms appearing at the electrodes, and every atom
discharging a minute charge of electricity upon the electrode at which it
is liberated.

=Electro-chemical Series.=--This is an arrangement of the metals in a
series in such a manner that the most electro-positive is at one end and
the most electro-negative at the other.

The order of the metals varies with the electrolyte in which the metals
are tested.

The following table shows such series for the most common metals, in three
different solutions:

  _Sulphuric acid._        _Hydrochloric acid._     _Caustic potash._

       Zinc                      Zinc                    Zinc
       Cadmium                   Cadmium                 Tin
       Tin                       Tin                     Cadmium
       Lead                      Lead                    Antimony
       Iron                      Iron                    Lead
       Nickel                    Copper                  Bismuth
       Bismuth                   Bismuth                 Iron
       Antimony                  Nickel                  Copper
       Copper                    Silver                  Nickel
       Silver                    Antimony                Silver
       Gold
       Platinum

Faraday stated several laws of electrolysis, as follows:

1. _The quantity of an ion liberated in a given time is proportional to
the quantity of electricity that has passed through the voltameter[10] in
that time._

2. _The quantity of an ion liberated in a voltameter is proportional to
the electro-chemical equivalent of the ion._

3. _The quantity of an ion liberated is equal to the electro-chemical
equivalent of the ion multiplied by the total quantity of electricity that
has passed._

=Electric Osmose.=--Porret observed that if a strong current be led into
certain liquids as if to electrolyze them, a porous partition being placed
between the electrodes, the current mechanically carries part of the
liquid through the porous diaphragm, so that the liquid is forced to a
higher level on one side than on the other. This phenomenon is known as
_electric osmose_.

=Electric Distillation.=--Closely connected with the preceding phenomenon
is that of the _electric distillation of liquids_. It was noticed by
Beccaria that _an electrified liquid evaporates more rapidly than one not
electrified_.

    Gernez has recently shown that in a bent closed tube, containing
    two portions of liquid, one of which is made highly + and the
    other highly -, the liquid passes over from + to -. This
    apparent distillation is not due to difference of temperature,
    nor does it depend on the extent of surface exposed, but is
    effected by a slow creeping of the liquid along the interior
    surface of the glass tubes. Bad conductors, such as turpentine,
    do not thus pass over.

[Illustration: FIG. 92.--Effect of the electric current on a frog’s legs;
discovered in 1678 by Galvani.]

=Muscular Contractions.=--It was discovered in 1678 that when a portion of
muscle of a frog’s leg, hanging by a thread of nerve bound with a silver
wire, was held over a copper support so that both nerve and wire touched
the copper, the muscle immediately contracted.

    More than a century later Galvani’s attention was drawn to the
    subject by his observation of spasmodic contractions in the legs
    of freshly killed frogs under the influence of the “return
    shock” experienced every time a neighboring electric machine was
    discharged.

    The limbs of the frog, prepared as directed by Galvani, are
    shown in fig. 92. After the animal has been killed the hind
    limbs are detached and skinned; the crural nerves and their
    attachments to the lumbar vertebrae remaining. For some hours
    after death the limbs retain their contractile power. The frog’s
    limbs thus prepared form an excessively delicate galvanoscope.

=Electroplating.=--This is the process of depositing a layer or coating of
a rarer metal upon the surface of a baser, or of a metal upon any
conducting surface, by electrolysis.

The electric current used may be obtained from a battery or other source.
The battery has its positive plate connected to a rod extending across a
trough or tank containing the plating bath.

Suspended from the rod are anodes of gold, silver, or copper or whatever
metal from which a deposit is desired. The other plates of the battery or
the negative elements, are connected with another rod across the trough,
to which are suspended the articles to be plated.

=Electrotyping.=--This is the process by which, type, wood cuts, etc., are
reproduced in copper by the process of electroplating. A mould is first
made of the set type in wax; this mould is next coated with black lead to
give it a metallic surface, as the wax is an insulator; the mould is then
subjected to the process of electro deposition, resulting in the formation
of a film of copper on the prepared surface.

The copper shell is removed from the mould by applying hot water; the
shell is then backed up with electrotype metal to render it strong enough
for use.

Almost all the illustrations in this book, for example, are printed from
electrotype copies, and not from the original wood blocks, which would not
wear so well.




                               CHAPTER IX

                               MAGNETISM


=Magnetism.=--The ancients applied the word “magnet,” _magnes lapes_, to
certain hard black stones which possess the property of attracting small
pieces of iron, and as discovered later, to have the still more remarkable
property of pointing north and south when hung up by a string. At this
time the magnet received the name of _lodestone_ or “leading stone.” It is
commonly, though incorrectly, spelled loadstone.

[Illustration: FIG. 93.--Simple compass. It consists of a magnetic needle
resting on a steel pivot, protected by a brass case covered with glass,
and a graduated circle marked with the letters N, E, S, W, to indicate the
cardinal points; _a b_ is a lever which arrests the needle by pushing it
against the glass when the button _d_ is pressed.]

=Ques. Describe two kinds of magnetism.=

Ans. Magnets have two opposite kinds of magnetism or magnetic poles, which
attract or repel each other in much the same way as would two opposite
kinds of electrification.

=Ques. What is the nature of each kind of magnetism?=

Ans. One has a tendency to move toward the north and the other toward the
south.

[Illustration: FIGS. 94 to 96.--Simple _bar magnet_ and _horse shoe
magnet_ with _keeper_. These are known as _permanent magnets_ in
distinction from _electromagnets_. The horse shoe magnet will attract more
than the bar magnet because both poles act together. A piece of soft iron,
or keeper is placed across the ends of a horse shoe magnet to assist in
preventing the loss of magnetism.]

[Illustration: FIGS. 97 and 98.--Horizontal magnetic needle, and magnetic
“dip” needle. A magnetic needle consists of a small bar magnet, supported
upon a pivot or suspended so that it is free to turn in a horizontal or
vertical plane. The form of magnetic needle illustrated in fig. 97 is
arranged to show the magnetic meridian; the needle moves upon a
perpendicular axis or pivot _ab_. In fig. 98, the needle _sn_ turns upon a
horizontal axis _ab_. This needle indicates the dip or inclination, that
is, the angle which it makes with the horizontal plane, due to the fact
that in most places the lines of force are not horizontal. In the northern
hemisphere the N pole of the needle is depressed, in the southern
hemisphere the S pole is similarly affected. When used, the dip needle
must be set so that the plane in which the needle swings contains the
magnetic meridian, as indicated by the horizontal needle.]

=Ques. Where is the magnetism the strongest?=

Ans. In two regions called the _poles_.

=Ques. Describe the distribution of magnetism in a long shaped magnet.=

Ans. The strongest magnetism resides in the ends, while all around the
magnet half way between the poles there is no attraction at all.

[Illustration: FIG. 99.--Magnetic poles. If a bar magnet be plunged into
iron filings and then lifted, as illustrated in the figure, a mass of
filings will cling to the ends of the magnet but not to the middle. The
ends are called the _poles_ of the magnet.]

=Ques. How are the poles designated?=

Ans. They are called the _north pole_ and the _south pole_.

=Ques. What is the distinguishing feature of each?=

Ans. The north pole points approximately to the earth’s geographical
north, while the south pole of a magnet points approximately to the
earth’s geographical south.

    The north pole is the positive (+) pole and the south pole is
    the negative. The north and south poles were formerly called in
    France, the austral and boreal poles respectively.

=Magnetic Field.=--When a straight bar magnet is held under a piece of
card board upon which iron filings are sprinkled, the filings will arrange
themselves in curved lines radiating from the poles. If a horse shoe
magnet be held at right angles to the plane of the card board, the filings
will arrange themselves in curved lines, as shown in fig. 108. These lines
are called _magnetic lines of force_ or simply _lines of force_; they show
that the medium surrounding a magnet is in a state of stress, the space so
affected being called the _magnetic field_.

[Illustration: FIG. 100.--Badly magnetized bar. Properly magnetized
magnets have only two poles; it is possible, however, by special or
careless magnetization, to produce magnets with more than two poles, but
no process will produce a magnet with a single pole. If an abnormal magnet
with more than two poles be dipped into iron filings, the latter will
adhere at places other than the two ends, as shown in the illustration.
The polarities are alternately N and S; that is, the regions N, B, N, have
north polarity, while A and C have south polarity. These are known as
_consequent poles_.]

[Illustration: FIGS. 101 to 107.--Effect of breaking a magnet into several
parts. If a magnetized needle be broken, each part will be found to be a
complete magnet having a N and S pole. The sub-division may be continued
indefinitely, but always with the same result as indicated in the figure.
This is evidence of the correctness of the molecular theory of magnetism,
which states that _the molecules of a magnet are themselves minute magnets
arranged in rows with their opposite poles in contact_.]

=Ques. What is the extent and character of the magnetic field?=

Ans. The influence of a magnet is supposed to extend in all directions
indefinitely, however, the effect is very slight beyond a comparatively
limited area.

[Illustration: FIG. 108.--The region about a magnet in which its magnetic
forces can be detected is called the _magnetic field_. This can be
represented graphically by placing a piece of cardboard over the magnet
and sprinkling iron filings on the paper, gently tapping at the same time.
Each filing becomes a temporary magnet by _induction_, and sets itself,
like the compass needle, in the direction of the _line of force_ of the
magnetic field.]

[Illustration: FIG. 109.--Tracing lines of force with a suspended magnet.
If a small magnetic needle, suspended by a thread, be held near a magnet,
it will point in some fixed direction depending on the proximity of the
poles of the magnet. The direction taken by the magnet is called the
direction of the force at the point, and if the suspended needle be moved
forward in the direction of the pole, it will trace out a curved line
which will be found to start from one of the poles, and end at the other.
Any number of such lines can be traced; the space filled by these lines of
force is called the _magnetic field_.]

[Illustration: FIG. 110.--Magnetic action: _Unlike poles of magnets
attract each other_.]

[Illustration: FIG. 111.--Magnetic action: _Like poles of magnets repel
each other_.]

=Magnetic Force.=--This is the force with which a magnet attracts or
repels another magnet or any piece of iron or steel. The force varies with
the distance, being greater when the magnet is nearer and less when the
magnet is farther off. The following are the laws relating to magnetic
force:

1. _Like magnetic poles repel one another; unlike magnetic poles attract
one another._

2. _The force exerted between two magnetic poles varies inversely as the
square of the distance between them._

=Magnetic Circuit.=--The path taken by magnetic lines of force is called a
magnetic circuit; the greater part of such a circuit is usually in
magnetic material, but there are often one or more air gaps included. The
total number of lines of force in the circuit is known as the _magnetic
flux_.

=Ques. How is magnetic flux measured?=

Ans. By a unit called the maxwell.

    Named after James Clerk Maxwell the Scottish physicist.

=Ques. What is the maxwell?=

Ans. _The amount of magnetism passing through every square centimetre of a
field of unit density._

=Ques. What is the unit of field strength?=

Ans. The gauss.

=Ques. What is a gauss?=

Ans. _The intensity of field which acts on a unit pole with a force of one
dyne. It is equal to one line of force per square centimetre_. Named
after Karl Friedrich Gauss, the German mathematician.

=The Magnetic Effect of the Current.=--Hans Christian Oerstead, the Danish
scientist, discovered in 1819 that a magnet tends to set itself at right
angles to a wire carrying an electric current. He also found that the way
in which the needle turns, whether to the right or left of its usual
position, depends: 1, upon the position of the wire that carries the
current, whether it be above or below the needle, and 2, on the direction
in which the current flows through the wire.

[Illustration: FIG. 112.--Illustrating Maxwell’s “corkscrew rule” for
relative directions of current and lines of force. According to the rule:
_the direction of the current and that of the resulting magnetic force are
in the same relation to each other as is the forward travel and rotation
of an ordinary corkscrew_, Thus, in the figure, if a current flow through
the wire _ab_ in the direction from _a_ to _b_, the magnetic lines will
encircle the wire in the direction of the curved arrow _ro_ which shows
the direction in which the corkscrew must be turned to advance in the
direction of the arrow _n_.]

To keep these movements in mind numerous rules have been suggested, of
which the following will be found convenient:

=Corkscrew Rule=.--_If the direction of travel of a right handed corkscrew
represent the direction of the current in a straight conductor, the
direction of rotation of the corkscrew will represent the direction of the
magnetic lines of force._

[Illustration: FIG. 113.--Experiment showing direction of lines of force
in the magnetic field surrounding a conductor carrying an electric
current. A piece of copper wire is pierced through the center of a sheet
of cardboard, and carried vertically for two or three feet then bent
around to the terminals of a battery or other source of current. If iron
filings be sprinkled over the card while the current is passing, they will
arrange themselves in circles around the wire, thus indicating the form of
the magnetic field surrounding the conductor. Compass needles may also be
used to show the direction of the lines of force at any point.]

[Illustration: FIG. 114.--Right hand rule to determine the direction of
magnetic field around a conductor carrying a current. The thumb of the
right hand is placed along the conductor, pointing in the direction in
which the current is flowing, then, if the fingers be partly closed, as
shown in the illustration, the finger tips will point in the direction of
the magnetic whirls.]

=Ques. What is the effect of a current flowing in a loop of wire?=

Ans. If, in figs. 116 and 117, the current flow in the direction indicated
by the arrow, the lines for magnetic force are found to surround the loop
as shown; all the lines leave on one side of the loop and return on the
other; accordingly, a north pole is formed on one side, and a south pole
on the other.

[Illustration: FIG. 115.--Right hand palm rule to determine the direction
of the magnetic field around a conductor carrying a current: Place the
palm of the outstretched right hand above and to the right side of the
wire with the fingers pointing in the direction of the current, and the
thumb extended at right angles, that is, pointing downward. The direction
in which the thumb points will indicate the direction of the magnetic
whirls.]

[Illustration: FIG. 116.--Lines of force of a circular loop. If a current
flow through the loop in the direction indicated, the lines of force both
inside and outside the loop, will cross the plane of the loop at right
angles, and all those which cross the loop on the inside will pass through
the plane in one direction (downwards in the figure), while all on the
outside will return through the plane in the opposite direction.]

=Solenoids.=--A solenoid consists of a spiral of conducting wire wound
cylindrically so that, when an electric current passes through it, its
turns are nearly equivalent to a succession of parallel circular circuits,
and it acquires magnetic properties similar to those of a bar magnet.

[Illustration: FIG. 117.--Lines of force of a circular loop. If the loop
pass through a piece of cardboard at right angles to its plane, and the
current flow as indicated, the dotted lines on the cardboard will
represent the direction of the lines of force in the plane of the
cardboard. The student should verify the lines of force as here given by
applying the corkscrew rule.]

=Ques. What is the character of the lines of force of a solenoid in which
a current is flowing?=

Ans. The lines of force must be thought of as closed loops linked with the
current. The conductor conveying the current passes through all the loops
of force, and these are, so to speak, threaded or slung on the
current-line of flow, as in fig. 116.

=Ques. What is the distribution of the lines of force?=

Ans. The lines of force form continuous closed curves running through the
interior of the coil; they issue from one end and enter into the other end
of the coil, as shown in fig. 117.

=Ques. What are the properties of a solenoid?=

Ans. A solenoid has north and south poles, and in fact possesses all the
properties of an ordinary permanent magnet, with the important difference
that the magnetism is entirely under control.

    Since a solenoid carrying a current attracts and repels by its
    extremities the poles of a magnet, two such solenoids will
    attract and repel each other.

[Illustration: FIG. 118.--Magnetic field of a solenoid. This is best
observed by cutting a piece of cardboard and fitting it around the
solenoid, as shown. If iron filings be sprinkled on the cardboard and a
current passed through the solenoid, the character of the field is
indicated. With the current in the direction shown, it will be found that
wherever small compass needles are placed, the direction in which their
north poles turn is along arrows marked on the card. The card only
exhibits the field in one of the sectional planes of the coil, but it is
obvious that the field is the same for all sectional planes.]

=Ques. How does the magnetic strength of a solenoid vary?=

Ans. It is proportional to the strength of the electric current passing
through it.

=Ques. On what, besides the current strength, does the magnetizing power
of a solenoid depend?=

Ans. _The magnetic effect or the magnetizing power is proportional to the
number of turns of wire composing the coil._

=Ques. How may the magnetizing power of a solenoid be increased?=

Ans. By inserting in the solenoid an _iron core_ or round bar of soft
iron.

[Illustration: FIG. 119.--Right hand rule for polarity of a solenoid: If
the solenoid be grasped in the right hand, so that the fingers point in
the direction in which the current is flowing in the wires, the thumb
extended will point in the direction of the north pole.]

=Ques. Describe the action of an iron core.=

Ans. At first, the presence of an iron core greatly increases the strength
of the field; after a time, however, as the strength of the current
flowing in the exciting coils is increased, the _conductibility_ of the
iron for the lines of force appears to decrease, until a point is
eventually reached when the presence of the iron core appears to have no
effect in increasing the strength of the field.

=Permeability.=--Permeability is a measure of the ease with which
magnetism passes through any substance. It is defined as: _the ratio
between the number of lines of force per unit area passing through a
magnetizable substance, and the magnetizing force which produces them_.

[Illustration: FIGS. 120 and 121.--Illustrating the effect of introducing
an iron core into a solenoid. In the upper figure, the air space or “air
core” surrounded by the solenoid offers considerable resistance to the
passage of magnetic lines, allowing only a small number to pass through.
If a piece of iron be introduced, as in the lower figure, the number of
lines will be greatly increased. The number of lines B passing through a
unit cross section of the iron core divided by the number of lines H,
passing through a unit cross section of the air core is called the
_permeability_ and designated by the Greek letter μ.]

In other words, it is the ratio of flux density to magnetizing force.
Permeability is a measure of the ease with which magnetism passes through
any substance. The permeability of good soft wrought iron is sometimes
3000 times that of air, varying with the quality of the iron.

=Ques. What is the effect of increasing the magnetization?=

Ans. The magnetic permeability decreases as the magnetization increases.

=Ques. What is magnetic saturation?=

Ans. The state of a magnet which has reached the highest degree of
magnetization.

[Illustration: FIG. 122.--Action of currents on solenoids. To demonstrate
this fact experimentally, a solenoid is constructed as shown, so that it
can be suspended by two pivots in the cups _a_ and _c_. The solenoid is
then movable about a vertical axis, and if a rectilinear current QP be
passed beneath it, which at the same time traverses the wires of the
solenoid, the latter is seen to turn and set at right angles to the lower
current; that is, in such a position that its circuits are parallel to the
fixed current; moreover, the current in the lower part of each of the
circuits is in the same direction as in the rectilinear wire. If, instead
of passing a rectilinear current below the solenoid, it be passed
vertically on the side, an attraction or repulsion will take place,
according as the two currents in the vertical wire, and in the nearest
part of the solenoid, are in the same or in contrary directions.]

    A magnet, just after being magnetized, will appear to have a
    higher degree of magnetism than it is able to retain
    permanently; that is, it will appear to be super-saturated,
    since it will support a greater weight immediately after being
    magnetized than it will after its armature has been once
    removed.

For all practical purposes, magnetic saturation may be defined as: That
point of magnetization where _a very large increase in the magnetizing
force does not produce any perceptible increase in the magnetization_.

From tests it has been shown that permeability increases with the flux
density up to a certain point and then decreases, indicating that the iron
is approaching a state of saturation.

=Magnetomotive Force.=--This is a force similar to electromotive force,
that is, magnetic pressure. When a coil passes around a core several
times, its magnetizing power, or magnetomotive force, (m.m.f.) is
proportional both to the strength of the current and to the number of
turns in the coil. The product of the current passing through the coil
multiplied by the number of turns composing the coil is called the _ampere
turns_.

It is known by experiment that one ampere turn produces 1.2566 units of
magnetic pressure, hence:

  magnetic pressure = 1.2566 × turns × amperes

that is,

  magnetomotive force (m.m.f.) = 1.2566 × n × I.

The unit of magnetic pressure is the _gilbert_ (named after William
Gilbert, the English physicist) and is equal to

  1 ÷ 1.2566 ampere turn = .7958 ampere turn.

=Reluctance.=--The magnetic pressure (magnetomotive force) acting in a
magnetic circuit encounters a certain opposition to the production of a
magnetic field, just as electromotive force in an electric circuit
encounters opposition to the production of a current. In the magnetic
circuit this opposition is called the _reluctance_; it is simply _magnetic
resistance_ and may be defined as: _the resistance offered to the magnetic
flux by the substance magnetized, being the ratio of the magnetomotive
force to the magnetic flux_.

The unit of reluctance or magnetic resistance is the _oersted_ (named
after Hans Christian Oersted, the Danish physicist) and is defined as:
_the reluctance offered by a cubic centimetre of vacuum_.

[Illustration: FIG. 123.--Mutual action of solenoids. When two solenoids
traversed by a current are allowed to act on each other, one of them being
held in the hand and the other being movable about a vertical axis, as
shown in the figure, attraction and repulsion will take place just as in
the case of two magnets (see figs. 110 and 111).]

=Analogy Between Electric and Magnetic Circuits.=--The total number of
magnetic lines of force, or magnetic flux, produced in any magnetic
circuit will depend on the magnetic pressure (m.m.f.) acting on the
circuit and the total reluctance of the circuit, just as the current in
the electrical circuit depends upon the electrical pressure and the
resistance of the circuit.

To make this plain, Ohm’s law states that

  electric current = electromotive force / resistance or I = E/R

expressed in units

  amperes = volts / ohms

The resistance, as already explained, depends on the materials of which
the circuit is composed, and their geometrical shape and size.

Similarly, in the magnetic circuit, the total number of magnetic lines
produced by a given magnetizing solenoid depends on the magnetic pressure,
the material composing the circuit, and its shape and size.

That is,

  magnetic flux = magnetomotive force / reluctance

expressed in units, the equation becomes:

  maxwells = gilberts / oersteds

_The gilbert is the unit of magnetomotive force, equivalent to the
magnetomotive force of .7958 ampere turn._

It should be noted that in the electric circuit resistance causes heat to
be generated and therefore energy to be wasted, but in the magnetic
circuit reluctance does not involve any similar waste of energy.

=Ques. Upon what does the reluctance of a magnetic circuit depend?=

Ans. _The reluctance is directly proportional to the length of the
circuit, and inversely proportional to its cross sectional area_.

    The reluctance of a magnetic circuit is calculated according to
    the following equation:

      reluctance = length in centimetres / (permeability × cross section
         in square centimetres)

=Hysteresis.=--The term hysteresis has been given by Ewing to the subject
of _lag of magnetic effects behind their causes_. Hysteresis means to “lag
behind,” hence its application to denote the _lagging of magnetism, in a
magnetic metal, behind the magnetizing flux which produces it_.

=Ques. What is the cause of hysteresis?=

Ans. It is due to the friction between the molecules of iron or other
magnetic substance which requires an expenditure of energy to change their
positions.

[Illustration: FIGS. 124 and 125.--Experiment illustrating the molecular
theory of magnetism. Coarse steel filings are placed inside a small glass
tube and the contents magnetized. It will be found that filings which at
first had no definite arrangement will rearrange themselves under the
influence of magnetic force, and assume symmetrical positions, each one
lying in line with, or parallel to its neighbor, as shown in the lower
figure.]

=Ques. When do the molecules change their positions?=

Ans. Both in the process of magnetization and demagnetization.

=Ques. What becomes of the loss of energy due to hysteresis?=

Ans. It is converted into heat in changing the positions of the molecules
during magnetization and demagnetization.

    Ewing gives the value for the energy in ergs dissipated per
    cubic centimetre, for a complete cycle of doubly reversed strong
    magnetization for a number of substances as follows:

    Substance                                           Energy dissipated
                                                               (ergs)
    Very soft annealed iron                                     9,300
    Less  “      “       “                                     16,300
    Hard drawn steel wire                                      60,000
    Annealed     “     “                                       70,000
    Same steel glass hard                                      76,000
    Piano steel wire annealed                                  94,000
      “     “    “   normal temper                            116,000
      “     “    “   glass hard                               117,000

    Approximately 28 foot pounds of energy are converted into heat
    in making a double reversal of strong magnetization in a cubic
    foot of iron.

=Residual Magnetism.=--When a mass of iron has once been magnetized, it
becomes a difficult matter to entirely remove all traces when the
magnetizing agent has been removed, and, as a general rule, a small amount
of magnetism is permanently retained by the iron. This is known as
_residual magnetism_, and it varies in amount with the quality of the
iron.

Well annealed, pure wrought iron, as a rule, possesses very little
residual magnetism, while, on the other hand, wrought iron, which contains
a large percentage of impurities, or which has been subjected to some
hardening process, such as hammering, rolling, stamping, etc., and cast
iron, possess a very large amount of residual magnetism.

Residual magnetism in iron is of great importance in the working of the
_self-exciting_ dynamo, and is, indeed, the essential principle of this
class of machine.

    That is, without residual magnetism in the field magnet core,
    the dynamo when started would not generate any current unless it
    received an initial excitation from an external source.




                               CHAPTER X

                       ELECTROMAGNETIC INDUCTION


The word _induction_, introduced by Faraday, has various meanings so far
as it relates to electricity. It signifies, in general, phenomena produced
in bodies by the influence of other bodies, having no necessary material
connection with them.

_A body charged with electricity causes or “induces” charges on
neighboring bodies._ The process in this case is called _electrostatic
induction_.

A magnet induces magnetism in neighboring masses of iron or other magnetic
materials by the process of _magnetic induction_.

Again, a moving magnet induces electric currents in neighboring conductors
by the process of _electromagnetic induction_.

=Faraday’s Discovery.=--All dynamos of whatever form, are based upon the
discovery made by Faraday[11] in 1831, which may be stated as follows:

_Electric currents are generated in conductors by moving them in a
magnetic field, so as to cut magnetic lines of force._

=Ques. What does the expression “cut lines of force” mean?=

Ans. A conductor, forming part of an electric circuit, _cuts lines of
force_ when it moves across a magnetic field in such manner as to _alter_
the number of magnetic lines of force which are embraced by the circuit.

    It is important to clearly understand the meaning of this
    expression, which will be later explained in more detail.

[Illustration: FIG. 126.--Faraday’s dynamo which embodies his discovery in
1831 of _electromagnetic induction_, the principle upon which all dynamos
work, as well as induction coils, transformers, and other electrical
apparatus.]

=Faraday’s Machine.=--After various experiments, Faraday made his “new
electrical machine” as shown in fig. 126. This piece of apparatus is
preserved and was shown in perfect action by Prof. S. P. Thompson in a
lecture delivered April 11th, 1891, after an interval of sixty years.

    It consists of a horse shoe magnet and a copper disc attached to
    a shaft and supported so as to turn freely. The magnet is so
    placed that its inter-polar lines of force traverse the disc
    from side to side. There are tw

Showing first 200,000 characters. Full text: gutenberg.org/ebooks/38384