Gutenberg · e01.org
Cover of Encyclopaedia Britannica, 11th Edition, "Electrostatics" to "Engis"
Project Gutenberg cover, or a typographic cover where none is held.

Gutenberg · ebook 35169

Encyclopaedia Britannica, 11th Edition, "Electrostatics" to "Engis"

by Various · English · public domain in the US

  • Language English
  • PG edition 2011
  • Rights public domain (US)
  • Source Project Gutenberg
0%

Contents

    ELSWICK ENGINEERING

    EL TEB ENGINEERS, MILITARY

    ELTON, CHARLES ISAAC ENGIS

    ELECTROSTATICS, the name given to that department of electrical science in which the phenomena of electricity at rest are considered. Besides their ordinary condition all bodies are capable of being thrown into a physical state in which they are said to be electrified or charged with electricity. When in this condition they become sources of electric force, and the space round them in which this force is manifested is called an "electric field" (see ELECTRICITY). Electrified bodies exert mechanical forces on each other, creating or tending to create motion, and also induce electric charges on neighbouring surfaces.

    The reader possessed of no previous knowledge of electrical phenomena will best appreciate the meaning of the terms employed by the aid of a few simple experiments.

    For this purpose the following apparatus should be provided:--(1) two small metal tea-trays and some clean dry tumblers, the latter preferably varnished with shellac varnish made with alcohol free from water; (2) two sheets of ebonite rather larger than the tea-trays; (3) a rod of sealing-wax or ebonite and a glass tube, also some pieces of silk and flannel; (4) a few small gilt pith balls suspended by dry silk threads; (5) a gold-leaf electroscope, and, if possible, a simple form of quadrant electrometer (see ELECTROSCOPE and ELECTROMETER); (6) some brass balls mounted on the ends of ebonite penholders, and a few tin canisters.

    With the aid of this apparatus, the principal facts of electrostatics can be experimentally verified, as follows:--

    Experiment I.--Place one tea-tray bottom side uppermost upon three warm tumblers as legs. Rub the sheet of ebonite vigorously with warm flannel and lay it rubbed side downwards on the top of the tray. Touch the tray with the finger for an instant, and lift up the ebonite without letting the hand touch the tray a second time. The tray is then found to be electrified. If a suspended gilt pith ball is held near it, the ball will first be attracted and then repelled.

    If small fragments of paper are scattered on the tray and then the other tray held in the hand over them, they will fly up and down rapidly. If the knuckle is approached to the electrified tray, a small spark will be seen, and afterwards the tray will be found to be discharged or unelectrified. If the electrified tray is touched with the sealing-wax or ebonite rod, it will not be discharged, but if touched with a metal wire, the hand, or a damp thread, it is discharged at once.

    This shows that some bodies are conductors and others non-conductors or insulators of electricity, and that bodies can be electrified by friction and impart their electric charge to other bodies. A charged conductor supported on a non-conductor retains its charge. It is then said to be insulated.

    Experiment II.--Arrange two tea-trays, each on dry tumblers as before.

    Rub the sheet of ebonite with flannel, lay it face downwards on one tray, touch that tray with the finger for a moment and lift up the ebonite sheet, rub it again, and lay it face downwards on the second tray and leave it there. Then take two suspended gilt pith balls and touch them (a) both against one tray; they will be found to repel each other; (b) touch one against one tray and the other against the other tray, and they will be found to attract each other. This proves the existence of two kinds of electricity, called positive and negative.

    The first tea-tray is positively electrified, and the second negatively. If an insulated brass ball is touched against the first tray and then against the knob or plate of the electroscope, the gold leaves will diverge. If the ball is discharged and touched against the other tray, and then afterwards against the previously charged electroscope, the leaves will collapse. This shows that the two electricities neutralize each other's effect when imparted equally to the same conductor.

    Experiment III.--Let one tray be insulated as before, and the electrified sheet of ebonite held over it, but not allowed to touch the tray. If the ebonite is withdrawn without touching the tray, the latter will be found to be unelectrified. If whilst holding the ebonite sheet over the tray the latter is also touched with an insulated brass ball, then this ball when removed and tested with the electroscope will be found to be negatively electrified.

    The sign of the electrification imparted to the electroscope when so charged--that is, whether positive or negative--can be determined by rubbing the sealing-wax rod with flannel and the glass rod with silk, and approaching them gently to the electroscope one at a time. The sealing-wax so treated is electrified negatively or resinously, and the glass with positive or vitreous electricity.

    Hence if the electrified sealing-wax rod makes the leaves collapse, the electroscopic charge is positive, but if the glass rod does the same, the electroscopic charge is negative. Again, if, whilst holding the electrified ebonite over the tray, we touch the latter for a moment and then withdraw the ebonite sheet, the tray will be found to be positively electrified. The electrified ebonite is said to act by "electrostatic induction" on the tray, and creates on it two induced charges, one of positive and the other of negative electricity.

    The last goes to earth when the tray is touched, and the first remains when the tray is insulated and the ebonite withdrawn.

    Experiment IV.--Place a tin canister on a warm tumbler and connect it by a wire with the gold-leaf electroscope. Charge positively a brass ball held on an ebonite stem, and introduce it, without touching, into the canister. The leaves of the electroscope will diverge with positive electricity. Withdraw the ball and the leaves will collapse. Replace the ball again and touch the outside of the canister; the leaves will collapse. If then the ball be withdrawn, the leaves will diverge a second time with negative electrification.

    If, before withdrawing the ball, after touching the outside of the canister for a moment the ball is touched against the inside of the canister, then on withdrawing it the ball and canister are found to be discharged. This experiment proves that when a charged body acts by induction on an insulated conductor it causes an electrical separation to take place; electricity of opposite sign is drawn to the side nearest the inducing body, and that of like sign is repelled to the remote side, and these quantities are equal in amount.

    Seat of the Electric Charge.--So far we have spoken of electric charge as if it resided on the conductors which are electrified. The work of Benjamin Franklin, Henry Cavendish, Michael Faraday and J. Clerk Maxwell demonstrated, however, that all electric charge or electrification of conductors consists simply in the establishment of a physical state in the surrounding insulator or dielectric, which state is variously called electric strain, electric displacement or electric polarization.

    Under the action of the same or identical electric forces the intensity of this state in various insulators is determined by a quality of them called their dielectric constant, specific inductive capacity or inductivity. In the next place we must notice that electrification is a measurable magnitude and in electrostatics is estimated in terms of a unit called the electrostatic unit of electric quantity.

    In the absolute C.G.S. system this unit quantity is defined as follows:--If we consider a very small electrified spherical conductor, experiment shows that it exerts a repulsive force upon another similar and similarly electrified body. Cavendish and C.A. Coulomb proved that this mechanical force varies inversely as the square of the distance between the centres of the spheres. The unit of mechanical force in the "centimetre, gramme, second" (C.G.S.) system of units is the dyne, which is approximately equal to 1/981 part of the weight of one gramme.

    A very small sphere is said then to possess a charge of one electrostatic unit of quantity, when it repels another similar and similarly electrified body with a force of one dyne, the centres being at a distance of one centimetre, provided that the spheres are in vacuo or immersed in some insulator, the dielectric constant of which is taken as unity.

    If the two small conducting spheres are placed with centres at a distance d centimetres, and immersed in an insulator of dielectric constant K, and carry charges of Q and Q' electrostatic units respectively, measured as above described, then the mechanical force between them is equal to QQ'/Kd^2 dynes. For constant charges and distances the mechanical force is inversely as the dielectric constant.

    Electric Force.--If a small conducting body is charged with Q electrostatic units of electricity, and placed in any electric field at a point where the electric force has a value E, it will be subject to a mechanical force equal to QE dynes, tending to move it in the direction of the resultant electric force. This provides us with a definition of a unit of electric force, for it is the strength of an electric field at that point where a small conductor carrying a unit charge is acted upon by unit mechanical force, assuming the dielectric constant of the surrounding medium to be unity.

    To avoid unnecessary complications we shall assume this latter condition in all the following discussion, which is equivalent simply to assuming that all our electrical measurements are made in air or in vacuo.

    Owing to the confusion introduced by the employment of the term force, Maxwell and other writers sometimes use the words electromotive intensity instead of electric force. The reader should, however, notice that what is generally called electric force is the analogue in electricity of the so-called acceleration of gravity in mechanics, whilst electrification or quantity of electricity is analogous to mass.

    If a mass of M grammes be placed in the earth's field at a place where the acceleration of gravity has a value g centimetres per second, then the mechanical force acting on it and pulling it downwards is Mg dynes.

    In the same manner, if an electrified body carries a positive charge Q electrostatic units and is placed in an electric field at a place where the electric force or electromotive intensity has a value E units, it is urged in the direction of the electric force with a mechanical force equal to QE dynes. We must, however, assume that the charge Q is so small that it does not sensibly disturb the original electric field, and that the dielectric constant of the insulator is unity.

    Faraday introduced the important and useful conception of lines and tubes of electric force. If we consider a very small conductor charged with a unit of positive electricity to be placed in an electric field, it will move or tend to move under the action of the electric force in a certain direction. The path described by it when removed from the action of gravity and all other physical forces is called a line of electric force.

    We may otherwise define it by saying that a line of electric force is a line so drawn in a field of electric force that its direction coincides at every point with the resultant electric force at that point. Let any line drawn in an electric field be divided up into small elements of length. We can take the sum of all the products of the length of each element by the resolved part of the electric force in its direction. This sum, or integral, is called the "line integral of electric force" or the electromotive force (E.M.F.) along this line.

    In some cases the value of this electromotive force between two points or conductors is independent of the precise path selected, and it is then called the potential difference (P.D.) of the two points or conductors. We may define the term potential difference otherwise by saying that it is the work done in carrying a small conductor charged with one unit of electricity from one point to the other in a direction opposite to that in which it would move under the electric forces if left to itself.

    Electric Potential.--Suppose then that we have a conductor charged with electricity; we may imagine its surface to be divided up into small unequal areas, each of which carries a unit charge of electricity. If we consider lines of electric force to be drawn from the boundaries of these areas, they will cut up the space round the conductor into tubular surfaces called tubes of electric force, and each tube will spring from an area of the conductor carrying a unit electric charge.

    Hence the charge on the conductor can be measured by the number of unit electric tubes springing from it. In the next place we may consider the charged body to be surrounded by a number of closed surfaces, such that the potential difference between any point on one surface and the earth is the same.

    These surfaces are called "equipotential" or "level surfaces," and we may so locate them that the potential difference between two adjacent surfaces is one unit of potential; that is, it requires one absolute unit of work (1 erg) to move a small body charged with one unit of electricity from one surface to the next. These enclosing surfaces, therefore, cut up the space into shells of potential, and divide up the tubes of force into electric cells.

    The surface of a charged conductor is an equipotential surface, because when the electric charge is in equilibrium there is no tendency for electricity to move from one part to the other.

    We arbitrarily call the potential of the earth zero, since all potential difference is relative and there is no absolute potential any more than absolute level. We call the difference of potential between a charged conductor and the earth the potential of the conductor. Hence when a body is charged positively its potential is raised above that of the earth, and when negatively it is lowered beneath that of the earth.

    Potential in a certain sense is to electricity as difference of level is to liquids or difference of temperature to heat. It must be noted, however, that potential is a mere mathematical concept, and has no objective existence like difference of level, nor is it capable per se of producing physical changes in bodies, such as those which are brought about by rise of temperature, apart from any question of difference of temperature. There is, however, this similarity between them.

    Electricity tends to flow from places of high to places of low potential, water to flow down hill, and heat to move from places of high to places of low temperature. Returning to the case of the charged body with the space around it cut up into electric cells by the tubes of force and shells of potential, it is obvious that the number of these cells is represented by the product QV, where Q is the charge and V the potential of the body in electrostatic units.

    An electrified conductor is a store of energy, and from the definition of potential it is clear that the work done in increasing the charge q of a conductor whose potential is v by a small amount dq, is vdq, and since this added charge increases in turn the potential, it is easy to prove that the work done in charging a conductor with Q units to a potential V units is 1/2 QV units of work. Accordingly the number of electric cells into which the space round is cut up is equal to twice the energy stored up, or each cell contains half a unit of energy.

    This harmonizes with the fact that the real seat of the energy of electrification is the dielectric or insulator surrounding the charged conductor.[1]

    We have next to notice three important facts in electrostatics and some consequences flowing therefrom.

    (i) Electrical Equilibrium and Potential.--If there be any number of charged conductors in a field, the electrification on them being in equilibrium or at rest, the surface of each conductor is an equipotential surface. For since electricity tends to move between points or conductors at different potentials, if the electricity is at rest on them the potential must be everywhere the same. It follows from this that the electric force at the surface of the conductor has no component along the surface, in other words, the electric force at the bounding surface of the conductor and insulator is everywhere at right angles to it.

    By the surface density of electrification on a conductor is meant the charge per unit of area, or the number of tubes of electric force which spring from unit area of its surface. Coulomb proved experimentally that the electric force just outside a conductor at any point is proportional to the electric density at that point. It can be shown that the resultant electric force normal to the surface at a point just outside a conductor is equal to 4[pi][sigma], where [sigma] is the surface density at that point. This is usually called Coulomb's Law.[2]

    (ii) Seat of Charge.--The charge on an electrified conductor is wholly on the surface, and there is no electric force in the interior of a closed electrified conducting surface which does not contain any other electrified bodies. Faraday proved this experimentally (see Experimental Researches, series xi. S 1173) by constructing a large chamber or box of paper covered with tinfoil or thin metal. This was insulated and highly electrified. In the interior no trace of electric charge could be found when tested by electroscopes or other means.

    Cavendish proved it by enclosing a metal sphere in two hemispheres of thin metal held on insulating supports. If the sphere is charged and then the jacketing hemispheres fitted on it and removed, the sphere is found to be perfectly discharged.[3] Numerous other demonstrations of this fact were given by Faraday. The thinnest possible spherical shell of metal, such as a sphere of insulator coated with gold-leaf, behaves as a conductor for static charge just as if it were a sphere of solid metal.

    The fact that there is no electric force in the interior of such a closed electrified shell is one of the most certainly ascertained facts in the science of electrostatics, and it enables us to demonstrate at once that particles of electricity attract and repel each other with a force which is inversely as the square of their distance.

    We may give in the first place an elementary proof of the converse proposition by the aid of a simple lemma:--

    Lemma.--If particles of matter attract one another according to the law of the inverse square the attraction of all sections of a cone for a particle at the vertex is the same. Definition.--The solid angle subtended by any surface at a point is measured by the quotient of its apparent surface by the square of its distance from that point. Hence the total solid angle round any point is 4[pi].

    The solid angles subtended by all normal sections of a cone at the vertex are therefore equal, and since the attractions of these sections on a particle at the vertex are proportional to their distances from the vertex, they are numerically equal to one another and to the solid angle of the cone.

    Let us then suppose a spherical shell O to be electrified. Select any point P in the interior and let a line drawn through it sweep out a small double cone (see fig. 1). Each cone cuts out an area on the surface equally inclined to the cone axis. The electric density on the sphere being uniform, the quantities of electricity on these areas are proportional to the areas, and if the electric force varies inversely as the square of the distance, the forces exerted by these two surface charges at the point in question are proportional to the solid angle of the little cone. Hence the forces due to the two areas at opposite ends of the chord are equal and opposed.

    [Illustration: FIG. 1.]

    Hence we see that if the whole surface of the sphere is divided into pairs of elements by cones described through any interior point, the resultant force at that point must consist of the sum of pairs of equal and opposite forces, and is therefore zero. For the proof of the converse proposition we must refer the reader to the Electrical Researches of the Hon. Henry Cavendish, p. 419, or to Maxwell's Treatise on Electricity and Magnetism, 2nd ed., vol. i. p.

    76, where Maxwell gives an elegant proof that if the force in the interior of a closed conductor is zero, the law of the force must be that of the inverse square of the distance.[4] From this fact it follows that we can shield any conductor entirely from external influence by other charged conductors by enclosing it in a metal case. It is not even necessary that this envelope should be of solid metal; a cage made of fine metal wire gauze which permits objects in its interior to be seen will yet be a perfect electrical screen for them.

    Electroscopes and electrometers, therefore, standing in proximity to electrified bodies can be perfectly shielded from influence by enclosing them in cylinders of metal gauze.

    Even if a charged and insulated conductor, such as an open canister or deep cup, is not perfectly closed, it will be found that a proof-plane consisting of a small disk of gilt paper carried at the end of a rod of gum-lac will not bring away any charge if applied to the deep inside portions. In fact it is curious to note how large an opening may be made in a vessel which yet remains for all electrical purposes "a closed conductor." Maxwell (Elementary Treatise, &c., p. 15) ingeniously applied this fact to the insulation of conductors.

    If we desire to insulate a metal ball to make it hold a charge of electricity, it is usual to do so by attaching it to a handle or stem of glass or ebonite.

    In this case the electric charge exists at the point where the stem is attached, and there leakage by creeping takes place. If, however, we employ a hollow sphere and let the stem pass through a hole in the side larger than itself, and attach the end to the interior of the sphere, then leakage cannot take place.

    Another corollary of the fact that there is no electric force in the interior of a charged conductor is that the potential in the interior is constant and equal to that at the surface. For by the definition of potential it follows that the electric force in any direction at any point is measured by the space rate of change of potential in that direction or E = [+-]dV/dx. Hence if the force is zero the potential V must be constant.

    (iii.) Association of Positive and Negative Electricities.--The third leading fact in electrostatics is that positive and negative electricity are always created in equal quantities, and that for every charge, say, of positive electricity on one conductor there must exist on some other bodies an equal total charge of negative electricity. Faraday expressed this fact by saying that no absolute electric charge could be given to matter.

    If we consider the charge of a conductor to be measured by the number of tubes of electric force which proceed from it, then, since each tube must end on some other conductor, the above statement is equivalent to saying that the charges at each end of a tube of electric force are equal.

    The facts may, however, best be understood and demonstrated by considering an experiment due to Faraday, commonly called the ice pail experiment, because he employed for it a pewter ice pail (Exp. Res. vol. ii. p. 279, or Phil. Mag. 1843, 22). On the plate of a gold-leaf electroscope place a metal canister having a loose lid. Let a metal ball be suspended by a silk thread, and the canister lid so fixed to the thread that when the lid is in place the ball hangs in the centre of the canister.

    Let the ball and lid be removed by the silk, and let a charge, say, of positive electricity (+Q) be given to the ball. Let the canister be touched with the finger to discharge it perfectly. Then let the ball be lowered into the canister. It will be found that as it does so the gold-leaves of the electroscope diverge, but collapse again if the ball is withdrawn. If the ball is lowered until the lid is in place, the leaves take a steady deflection.

    Next let the canister be touched with the finger, the leaves collapse, but diverge again when the ball is withdrawn. A test will show that in this last case the canister is left negatively electrified. If before the ball is withdrawn, after touching the outside of the canister with the finger, the ball is tilted over to make it touch the inside of the canister, then on withdrawing it the canister and ball are found to be perfectly discharged.

    The explanation is as follows: the charge (+Q) of positive electricity on the ball creates by induction an equal charge (-Q) on the inside of the canister when placed in it, and repels to the exterior surface of the canister an equal charge (+Q). On touching the canister this last charge goes to earth.

    Hence when the ball is touched against the inside of the canister before withdrawing it a second time, the fact that the system is found subsequently to be completely discharged proves that the charge -Q induced on the inside of the canister must be exactly equal to the charge +Q on the ball, and also that the inducing action of the charge +Q on the ball created equal quantities of electricity of opposite sign, one drawn to the inside and the other repelled to the outside of the canister.

    Electrical Capacity.--We must next consider the quality of a conductor called its electrical capacity. The potential of a conductor has already been defined as the mechanical work which must be done to bring up a very small body charged with a unit of positive electricity from the earth's surface or other boundary taken as the place of zero potential to the surface of this conductor in question. The mathematical expression for this potential can in some cases be calculated or predetermined.

    Potential of a sphere.

    Thus, consider a sphere uniformly charged with Q units of positive
    electricity. It is a fundamental theorem in attractions that a thin
    spherical shell of matter which attracts according to the law of the
    inverse square acts on all external points as if it were concentrated
    at its centre. Hence a sphere having a charge Q repels a unit charge
    placed at a distance x from its centre with a force Q/x^2 dynes, and
    therefore the work W in ergs expended in bringing the unit up to that
    point from an infinite distance is given by the integral

    /x
    W = | Qx^-2 dx = Q/x (1).
    /[oo]

    Capacity of a sphere.

    Hence the potential at the surface of the sphere, and therefore the
    potential of the sphere, is Q/R, where R is the radius of the sphere
    in centimetres. The quantity of electricity which must be given to the
    sphere to raise it to unit potential is therefore R electrostatic
    units. The capacity of a conductor is defined to be the charge
    required to raise its potential to unity, all other charged conductors
    being at an infinite distance. This capacity is then a function of the
    geometrical dimensions of the conductor, and can be mathematically
    determined in certain cases.

    Since the potential of a small charge of
    electricity dQ at a distance r is equal to dQ/r, and since the
    potential of all parts of a conductor is the same in those cases in
    which the distribution of surface density of electrification is
    uniform or symmetrical with respect to some point or axis in the
    conductor, we can calculate the potential by simply summing up terms
    like [sigma]dS/r, where dS is an element of surface, [sigma] the
    surface density of electricity on it, and r the distance from the
    symmetrical centre. The capacity is then obtained as the quotient of
    the whole charge by this potential.

    Thus the distribution of
    electricity on a sphere in free space must be uniform, and all parts
    of the charge are at an equal distance R from the centre. Accordingly
    the potential at the centre is Q/R. But this must be the potential
    of the sphere, since all parts are at the same potential V. Since
    the capacity C is the ratio of charge to potential, the capacity of
    the sphere in free space is Q/V = R, or is numerically the same as its
    radius reckoned in centimetres.

    Capacity of a thin rod.

    We can thus easily calculate the capacity of a long thin wire like a
    telegraph wire far removed from the earth, as follows: Let 2r be the
    diameter of the wire, l its length, and [sigma] the uniform surface
    electric density. Then consider a thin annulus of the wire of width
    dx; the charge on it is equal to 2[pi]r[sigma]/dx units, and the
    potential V at a point on the axis at a distance x from the annulus
    due to this elementary charge is

    _l/2
    / 2[pi]r[sigma]
    V = 2 | -----------------dx = 4[pi]r[sigma] {log_e (1/2 l + [root][r^2 + 1/4 l^2]) - log_e ^r}.
    _/ [root](r^2 + x^2)
    0

    If, then, r is small compared with l, we have V = 4[pi]r[sigma]log_e
    l/r. But the charge is Q = 2[pi]r[sigma], and therefore the capacity
    of the thin wire is given by

    C = 1/2 log_e l/r (2).

    Potential of an ellipsoid.

    A more difficult case is presented by the ellipsoid[5]. We have first
    to determine the mode in which electricity distributes itself on a
    conducting ellipsoid in free space. It must be such a distribution
    that the potential in the interior will be constant, since the
    electric force must be zero. It is a well-known theorem in attractions
    that if a shell is made of gravitative matter whose inner and outer
    surfaces are similar ellipsoids, it exercises no attraction on a
    particle of matter in its interior[6].

    Consider then an ellipsoidal
    shell the axes of whose bounding surfaces are (a, b, c) and (a + da),
    (b + db), (c + dc), where da/a = db/b = dc/c = [mu]. The potential of
    such a shell at any internal point is constant, and the equipotential
    surfaces for external space are ellipsoids confocal with the
    ellipsoidal shell. Hence if we distribute electricity over an
    ellipsoid, so that its density is everywhere proportional to the
    thickness of a shell formed by describing round the ellipsoid a
    similar and slightly larger one, that distribution will be in
    equilibrium and will produce a constant potential throughout the
    interior.

    Thus if [sigma] is the surface density, [delta] the
    thickness of the shell at any point, and [rho] the assumed volume
    density of the matter of the shell, we have [sigma] = A[delta][rho].
    Then the quantity of electricity on any element of surface dS is A
    times the mass of the corresponding element of the shell; and if Q is
    the whole quantity of electricity on the ellipsoid, Q = A times the
    whole mass of the shell. This mass is equal to 4[pi]abc[rho][mu];
    therefore Q = A4[pi]abc[rho][mu] and [delta] = [mu]p, where p is the
    length of the perpendicular let fall from the centre of the ellipsoid
    on the tangent plane. Hence

    [sigma] = Qp/4[pi]abc (3).

    Capacity of an ellipsoid.

    Accordingly for a given ellipsoid the surface density of free
    distribution of electricity on it is everywhere proportional to the
    length of the perpendicular let fall from the centre on the tangent
    plane at that point. From this we can determine the capacity of the
    ellipsoid as follows: Let p be the length of the perpendicular from
    the centre of the ellipsoid, whose equation is x^2/a^2 + y^2/b^2 +
    z^2/c^2 = 1 to the tangent plane at x, y, z. Then it can be shown that
    1/p^2 = x^2/a^4 + y^2/b^4 + z^2/c^4 (see Frost's Solid Geometry, p.
    172). Hence the density [sigma] is given by

    Q 1

    [sigma] = -------- -----------------------------------,
    4[pi]abc [root](x^2/a^4 + y^2/b^4 + z^2/c^4)

    and the potential at the centre of the ellipsoid, and therefore its
    potential as a whole is given by the expression,

    / [sigma]dS Q / dS
    V = | --------- = -------- | ------------------------------------ (4).
    / r 4[pi]abc / r[root](x^2/a^4 + y^2/b^4 + z^2/c^4)

    Accordingly the capacity C of the ellipsoid is given by the equation

    1 1 / dS
    -- = -------- | ---------------------------------------------------------- (5).
    C 4[pi]abc
    / [root](x^2 + y^2 + z^2)[root](x^2/a^4 + y^2/b^4 + z^2/c^4)

    It has been shown by Professor Chrystal that the above integral may
    also be presented in the form,[7]

    1 /[oo] d[lambda]
    -- = 1/2 | -------------------------------------------------------- (6).
    C
    /0 [root]{(a^2 + [lambda])(b^2 + [lambda])(c^2 + [lambda])}

    The above expressions for the capacity of an ellipsoid of three
    unequal axes are in general elliptic integrals, but they can be
    evaluated for the reduced cases when the ellipsoid is one of
    revolution, and hence in the limit either takes the form of a long rod
    or of a circular disk.

    Thus if the ellipsoid is one of revolution, and ds is an element of
    arc which sweeps out the element of surface dS, we have

    /dx\ /py\ 2[pi]b^2
    dS = 2[pi]yds = 2[pi]ydx / ( -- ) = 2[pi]ydx / ( -- ) = -------- dx.
    \ds/ \ b/ p

    Hence, since [sigma] = Qp/4[pi]ab^2, [sigma]dS = Qdx/2a.

    Accordingly the distribution of electricity is such that equal
    parallel slices of the ellipsoid of revolution taken normal to the
    axis of revolution carry equal charges on their curved surface.

    The capacity C of the ellipsoid of revolution is therefore given by
    the expression

    1 1 / dx
    -- = -- | ----------------- (7).
    C 2a
    / [root](x^2 + y^2)

    If the ellipsoid is one of revolution round the major axis a (prolate)
    and of eccentricity e, then the above formula reduces to

    1 1 /1 + e\
    -- = --- log_[epsilon]( ----- ) (8).
    C1 2ae \1 - e/

    Whereas if it is an ellipsoid of revolution round the minor axis b
    (oblate), we have

    1 sin^-1 ae
    --- = ---------- (9).
    C^2 ae

    In each case we have C = a when e = 0, and the ellipsoid thus becomes
    a sphere.

    In the extreme case when e = 1, the prolate ellipsoid becomes a long
    thin rod, and then the capacity is given by

    C1 = a/log_[epsilon] 2a/b (10),

    which is identical with the formula (2) already obtained. In the other
    extreme case the oblate spheroid becomes a circular disk when e = 1,
    and then the capacity C2 = 2a/[pi]. This last result shows that the
    capacity of a thin disk is 2/[pi] = 1/1.571 of that of a sphere of the
    same radius. Cavendish (Elec. Res. pp. 137 and 347) determined in
    1773 experimentally that the capacity of a sphere was 1.541 times that
    of a disk of the same radius, a truly remarkable result for that date.

    Three other cases of practical interest present themselves, viz. the
    capacity of two concentric spheres, of two coaxial cylinders and of
    two parallel planes.

    Capacity of two concentric spheres.

    Consider the case of two concentric spheres, a solid one enclosed in a
    hollow one. Let R1 be the radius of the inner sphere, R2 the inside
    radius of the outer sphere, and R2 the outside radius of the outer
    spherical shell. Let a charge +Q be given to the inner sphere. Then
    this produces a charge -Q on the inside of the enclosing spherical
    shell, and a charge +Q on the outside of the shell. Hence the
    potential V at the centre of the inner sphere is given by V =
    Q/R1 - Q/R2 + Q/R3. If the outer shell is connected to the earth, the
    charge +Q on it disappears, and we have the capacity C of the inner
    sphere given by

    C = 1/R1 - 1/R2 = (R2 - R1)/R1R2 (11).

    Such a pair of concentric spheres constitute a condenser (see LEYDEN
    JAR), and it is obvious that by making R2 nearly equal to R1, we may
    enormously increase the capacity of the inner sphere. Hence the name
    condenser.

    Capacity of two coaxial cylinders.

    The other case of importance is that of two coaxial cylinders. Let a
    solid circular sectioned cylinder of radius R1 be enclosed in a
    coaxial tube of inner radius R2. Then when the inner cylinder is at
    potential V1 and the outer one kept at potential V2 the lines of
    electric force between the cylinders are radial. Hence the electric
    force E in the interspace varies inversely as the distance from the
    axis. Accordingly the potential V at any point in the interspace is
    given by

    /
    E = -dV/dR = A/R or V = -A | R^-1 dR, (12),
    /

    where R is the distance of the point in the interspace from the axis,
    and A is a constant. Hence V2 - V1 = -A log R2/R1. If we consider a
    length l of the cylinder, the charge Q on the inner cylinder is Q =
    2[pi]R1l[sigma], where [sigma] is the surface density, and by
    Coulomb's law [sigma] = E1/4 [pi], where E1 = A/R1 is the force at the
    surface of the inner cylinder.

    Accordingly Q = 2[pi]R1lA/4[pi]R1 = Al/2. If then the outer cylinder
    be at zero potential the potential V of the inner one is

    V = A log (R2/R1), and its capacity C = l/2 log R2/R1.

    This formula is important in connexion with the capacity of electric
    cables, which consist of a cylindrical conductor (a wire) enclosed in
    a conducting sheath. If the dielectric or separating insulator has a
    constant K, then the capacity becomes K times as great.

    Capacity of two parallel planes.

    "Edge effect."

    The capacity of two parallel planes can be calculated at once if we
    neglect the distribution of the lines of force near the edges of the
    plates, and assume that the only field is the uniform field between
    the plates. Let V1 and V2 be the potentials of the plates, and let a
    charge Q be given to one of them. If S is the surface of each plate,
    and d their distance, then the electric force E in the space between
    them is E = (V1-V2)/d. But if [sigma] is the surface density, E =
    4[pi][sigma], and [sigma] = Q/S. Hence we have

    (V1 - V2) d = 4[pi]Q/S or C = Q/(V1 - V2) = S/4[pi]d (13).

    In this calculation we neglect altogether the fact that electric force
    distributed on curved lines exists outside the interspace between the
    plates, and these lines in fact extend from the back of one plate to
    that of the other. G.R. Kirchhoff (Gesammelte Abhandl. p. 112) has
    given a full expression for the capacity C of two circular plates of
    thickness t and radius r placed at any distance d apart in air from
    which the edge effect can be calculated. Kirchhoff's expression is as
    follows:--

    [pi]r^2 r / 16[pi]r(d+t) d + t\
    C = ------- + ------ ( d log_[epsilon] ------------ + t log_[epsilon] ----- ) (14).
    4[pi]d 4[pi]d \ [epsilon]d^2 t /

    In the above formula [epsilon] is the base of the Napierian
    logarithms. The first term on the right-hand side of the equation is
    the expression for the capacity, neglecting the curved edge
    distribution of electric force, and the other terms take into account,
    not only the uniform field between the plates, but also the
    non-uniform field round the edges and beyond the plates.

    Guard plates.

    In practice we can avoid the difficulty due to irregular distribution
    of electric force at the edges of the plate by the use of a guard
    plate as first suggested by Lord Kelvin.[8] If a large plate has a
    circular hole cut in it, and this is nearly filled up by a circular
    plate lying in the same plane, and if we place another large plate
    parallel to the first, then the electric field between this second
    plate and the small circular plate is nearly uniform; and if S is the
    area of the small plate and d its distance from the opposed plate, its
    capacity may be calculated by the simple formula C = S/4[pi]d.

    The
    outer larger plate in which the hole is cut is called the "guard
    plate," and must be kept at the same potential as the smaller inner or
    "trap-door plate." The same arrangement can be supplied to a pair of
    coaxial cylinders. By placing metal plates on either side of a larger
    sheet of dielectric or insulator we can construct a condenser of
    relatively large capacity. The instrument known as a Leyden jar (q.v.)
    consists of a glass bottle coated within and without for three parts
    of the way up with tinfoil.

    Systems of condensers.

    If we have a number of such condensers we can combine them in
    "parallel" or in "series." If all the plates on one side are connected
    together and also those on the other, the condensers are joined in
    parallel. If C1, C2, C3, &c., are the separate capacities, then
    [Sigma](C) = C1 + C2 + C3 + &c., is the total capacity in parallel. If
    the condensers are so joined that the inner coating of one is
    connected to the outer coating of the next, they are said to be in
    series.

    Since then they are all charged with the same quantity of
    electricity, and the total over all potential difference V is the sum
    of each of the individual potential differences V1, V2, V3, &c., we
    have

    Q = C1V1 = C2V2 = C3V3 = &c., and V = V1 + V2 + V3 + &c.

    The resultant capacity is C = Q/V, and

    C = 1/(1/C1 + 1/C2 + 1/C3 + &c.) = 1/[Sigma](1/C) (15).

    These rules provide means for calculating the resultant capacity when
    any number of condensers are joined up in any way.

    If one condenser is charged, and then joined in parallel with another
    uncharged condenser, the charge is divided between them in the ratio
    of their capacities. For if C1 and C2 are the capacities and Q1 and Q2
    are the charges after contact, then Q1/C1 and Q2/C2 are the potential
    differences of the coatings and must be equal. Hence Q1/C1 = Q2/C2 or
    Q1/Q2 = C1/C2. It is worth noting that if we have a charged sphere we
    can perfectly discharge it by introducing it into the interior of
    another hollow insulated conductor and making contact. The small
    sphere then becomes part of the interior of the other and loses all
    charge.

    Measurement of Capacity.--Numerous methods have been devised for the
    measurement of the electrical capacity of conductors in those cases in
    which it cannot be determined by calculation. Such a measurement may
    be an absolute determination or a relative one. The dimensions of
    a capacity in electrostatic measure is a length (see UNITS, PHYSICAL).
    Thus the capacity of a sphere in electrostatic units (E.S.U.) is the
    same as the number denoting its radius in centimetres.

    The unit of
    electrostatic capacity is therefore that of a sphere of 1 cm.
    radius.[9] This unit is too small for practical purposes, and hence a
    unit of capacity 900,000 greater, called a microfarad, is generally
    employed. Thus for instance the capacity in free space of a sphere 2
    metres in diameter would be 100/900,000 = 1/9000 of a microfarad. The
    electrical capacity of the whole earth considered as a sphere is about
    800 microfarads. An absolute measurement of capacity means, therefore,
    a determination in E.S. units made directly without reference to any
    other condenser.

    On the other hand there are numerous methods by which
    the capacities of condensers may be compared and a relative
    measurement made in terms of some standard.

    Relative determinations.

    One well-known comparison method is that of C.V. de Sauty. The two
    condensers to be compared are connected in the branches of a
    Wheatstone's Bridge (q.v.) and the other two arms completed with
    variable resistance boxes. These arms are then altered until on
    raising or depressing the battery key there is no sudden deflection
    either way of the galvanometer. If R1 and R2 are the arms' resistances
    and C1 and C2 the condenser capacities, then when the bridge is
    balanced we have R1 : R2 = C1 : C2.

    Another comparison method much used in submarine cable work is the
    method of mixtures, originally due to Lord Kelvin and usually called
    Thomson and Gott's method. It depends on the principle that if two
    condensers of capacity C1 and C2 are respectively charged to
    potentials V1 and V2, and then joined in parallel with terminals of
    opposite charge together, the resulting potential difference of the
    two condensers will be V, such that

    (C1V1 - C2V2)
    V = ------------- (16);
    (C + C)

    and hence if V is zero we have C1 : C2 = V2 : V1.

    The method is carried out by charging the two condensers to be
    compared at the two sections of a high resistance joining the ends of
    a battery which is divided into two parts by a movable contact.[10]
    This contact is shifted until such a point is found by trial that the
    two condensers charged at the different sections and then joined as
    above described and tested on a galvanometer show no charge. Various
    special keys have been invented for performing the electrical
    operations expeditiously.

    A simple method for condenser comparison is to charge the two
    condensers to the same voltage by a battery and then discharge them
    successively through a ballistic galvanometer (q.v.) and observe the
    respective "throws" or deflections of the coil or needle. These are
    proportional to the capacities. For the various precautions necessary
    in conducting the above tests special treatises on electrical testing
    must be consulted.

    Absolute determinations.

    In the absolute determination of capacity we have to measure the ratio
    of the charge of a condenser to its plate potential difference. One of
    the best methods for doing this is to charge the condenser by the
    known voltage of a battery, and then discharge it through a
    galvanometer and repeat this process rapidly and successively. If a
    condenser of capacity C is charged to potential V, and discharged n
    times per second through a galvanometer, this series of intermittent
    discharges is equivalent to a current nCV.

    Hence if the galvanometer
    is calibrated by a potentiometer (q.v.) we can determine the value of
    this current in amperes, and knowing the value of n and V thus
    determine C. Various forms of commutator have been devised for
    effecting this charge and discharge rapidly by J.J. Thomson, R.T.
    Glazebrook, J.A. Fleming and W.C. Clinton and others.[11] One form
    consists of a tuning-fork electrically maintained in vibration of
    known period, which closes an electric contact at every vibration and
    sets another electromagnet in operation, which reverses a switch and
    moves over one terminal of the condenser from a battery to a
    galvanometer contact.

    In another form, a revolving contact is used
    driven by an electric motor, which consists of an insulating disk
    having on its surface slips of metal and three wire brushes a, b, c
    (see fig. 2) pressing against them. The metal slips are so placed
    that, as the disk revolves, the middle brush, connected to one
    terminal of the condenser C, is alternately put in conductive
    connexion with first one and then the other outside brush, which are
    joined respectively to the battery B and galvanometer G terminals.
    From the speed of this motor the number of commutations per second can
    be determined.

    The above method is especially useful for the
    determinations of very small capacities of the order of 100
    electrostatic units or so and upwards.

    [Illustration: FIG. 2.]

    Dielectric constant.--Since all electric charge consists in a state of strain or polarization of the dielectric, it is evident that the physical state and chemical composition of the insulator must be of great importance in determining electrical phenomena. Cavendish and subsequently Faraday discovered this fact, and the latter gave the name "specific inductive capacity," or "dielectric constant," to that quality of an insulator which determines the charge taken by a conductor embedded in it when charged to a given potential.

    The simplest method of determining it numerically is, therefore, that adopted by Faraday.[12] He constructed two equal condensers, each consisting of a metal ball enclosed in a hollow metal sphere, and he provided also certain hemispherical shells of shellac, sulphur, glass, resin, &c., which he could so place in one condenser between the ball and enclosing sphere that it formed a condenser with solid dielectric. He then determined the ratio of the capacities of the two condensers, one with air and the other with the solid dielectric.

    This gave the dielectric constant K of the material. Taking the dielectric constant of air as unity he obtained the following values, for shellac K = 2.0, glass K = 1.76, and sulphur K = 2.24.

    TABLE I.--Dielectric Constants (K) of Solids (K for Air = 1).

    +----------------------------------+-------+--------------------+
    | Substance. | K. | Authority. |
    +----------------------------------+-------+--------------------+
    | Glass, double extra dense flint, | | |
    | density 4.5 | 9.896 | J. Hopkinson |
    | Glass, light flint, density 3.2 | 6.72 | " |
    | Glass, hard crown, density 2.485 | 6.61 | " |
    | / | 2.24 | M. Faraday |
    | | | 2.88 | Coullner |
    | Sulphur . . . . . . . . . . .< | 3.84 | L.

    Boltzmann |
    | | | 4.0 | P.J. Curie |
    | \ | 2.94 | P.R. Blondlot |
    | / | 2.05 | Rosetti |
    | | | 3.15 | Boltzmann |
    | Ebonite . . . . . . . . . . .< | 2.21 | Schiller |
    | \ | 2.86 | Elsas |
    | India-rubber, pure brown | 2.12 | Schiller |
    | India-rubber, vulcanized, grey | 2.69 | " |
    | Gutta-percha | 2.462 | J.E. H.

    Gordon |
    | / | 1.977 | Gibson and Barclay |
    | | | 2.32 | Boltzmann |
    | Paraffin . . . . . . . . . . .< | 2.29 | J. Hopkinson |
    | \ | 1.99 | Gordon |
    | / | 2.95 | Wallner |
    | Shellac . . . . . . . . . . .< | 2.74 | Gordon |
    | \ | 3.04 | A.A. Winkelmann |
    | / | 6.64 | I. Klemencic |
    | | | 8.00 | P.J.

    Curie |
    | Mica . . . . . . . . . . . . .< | 7.98 | E.M.L. Bouty |
    | \ | 5.97 | Elsas |
    | Quartz-- | | |
    | along optic axis | 4.55 | P.J. Curie |
    | perp. to optic axis | 4.49 | P.J. Curie |
    | Ice at -23 deg. |78.0 | Bouty |
    +----------------------------------+-------+--------------------+

    Since Faraday's time, by improved methods, but depending essentially upon the same principles, an enormous number of determinations of the dielectric constants of various insulators, solid, liquid and gaseous, have been made (see tables I., II., III. and IV.). There are very considerable differences between the values assigned by different observers, sometimes no doubt due to differences in method, but in most cases unquestionably depending on variations in the quality of the specimens examined. The value of the dielectric constant is greatly affected by the temperature and the frequency of the applied electric force.

    TABLE II.--Dielectric Constant (K) of Liquids.

    +----------------------------+--------+--------------+
    | Liquid. | K. | Authority. |
    +----------------------------+--------+--------------+
    | Water at 17 deg. C. | 80.88 | F. Heerwagen |
    | " " 25 deg. C. | 75.7 | E.B. Rosa |
    | " " 25.3 deg. C. | 78.87 | Franke |
    | Olive oil | 3.16 | Hopkinson |
    | Castor oil | 4.78 | " |
    | Turpentine | 2.15 | P.A.

    Silow |
    | " | 2.23 | Hopkinson |
    | Petroleum | 2.072 | Silow |
    | " | 2.07 | Hopkinson |
    | Ethyl alcohol at 25 deg. C.| 25.7 | Rosa |
    | Ethyl ether | 4.57 | Doule |
    | " " | 4.8 | Bouty |
    | Acetic acid | 9.7 | Franke |
    +----------------------------+--------+--------------+

    TABLE III.--Dielectric Constant of some Bodies at a very low
    Temperature (-185 deg. C.) (Fleming and Dewar).

    +----------------+-----------+------------+
    | Substance. | K | K |
    | | at 15 | at -185 |
    | | deg. C. | deg.

    C. |
    +----------------+-----------+------------+
    | Water | 80 | 2.4 to 2.9 |
    | Formic acid | 62 | 2.41 |
    | Glycerine | 56 | 3.2 |
    | Methyl alcohol | 34 | 3.13 |
    | Nitrobenzene | 32 | 2.6 |
    | Ethyl alcohol | 25 | 3.1 |
    | Acetone | 21.85 | 2.62 |
    | Ethyl nitrate | 17.7 | 2.73 |
    | Amyl alcohol | 16 | 2.14 |
    | Aniline | 7.5 | 2.92 |
    | Castor oil | 4.78 | 2.19 |
    | Ethyl ether | 4.25 | 2.31 |
    +----------------+-----------+------------+

    The above determinations at low temperature were made with either a steady or a slowly alternating electric force applied a hundred times a second. They show that the dielectric constant of a liquid generally undergoes great reduction in value when the liquid is frozen and reduced to a low temperature.[13]

    The dielectric constants of gases have been determined by L. Boltzmann and I. Klemencic as follows:--

    TABLE IV.--Dielectric Constants (K) of Gases at 15 deg. C. and 760 mm.
    Vacuum = 1.

    +---------------------+------------+------------+------------+
    | | Dielectric | | Optical |
    | Gas. | Constant | [root]K. | Refractive |
    | | K. | | Index. |
    | | | | [mu]. |
    +---------------------+------------+------------+------------+
    | Air | 1.000590 | 1.000295 | 1.000293 |
    | Hydrogen | 1.000264 | 1.000132 | 1.000139 |
    | Carbon dioxide | 1.000946 | 1.000475 | 1.000454 |
    | Carbon monoxide | 1.000690 | 1.000345 | 1.000335 |
    | Nitrous oxide | 1.000994 | 1.000497 | 1.000516 |
    | Ethylene | 1.001312 | 1.000656 | 1.000720 |
    | Marsh gas (methane) | 1.000944 | 1.000478 | 1.000442 |
    | Carbon bisulphide | 1.002900 | 1.001450 | 1.001478 |
    | Sulphur dioxide | 1.00954 | 1.004770 | 1.000703 |
    | Ether | 1.00744 | 1.003720 | 1.00154 |
    | Ethyl chloride | 1.01552 | 1.007760 | 1.001174 |
    | Ethyl bromide | 1.01546 | 1.007730 | 1.00122 |
    +---------------------+------------+------------+------------+

    In general the dielectric constant is reduced with decrease of temperature towards a certain limiting value it would attain at the absolute zero. This variation, however, is not always linear. In some cases there is a very sudden drop at or below a certain temperature to a much lower value, and above and below the point the temperature variation is small.

    There is also a large difference in most cases between the value for a steadily applied electric force and a rapidly reversed or intermittent force--in the last case a decrease with increase of frequency. Maxwell (Elec. and Magn. vol. ii. S 788) showed that the square root of the dielectric constant should be the same number as the refractive index for waves of the same frequency (see ELECTRIC WAVES).

    There are very few substances, however, for which the optical refractive index has the same value as K for steady or slowly varying electric force, on account of the great variation of the value of K with frequency.

    There is a close analogy between the variation of dielectric constant of an insulator with electric force frequency and that of the rigidity or stiffness of an elastic body with the frequency of applied mechanical stress. Thus pitch is a soft and yielding body under steady stress, but a bar of pitch if struck gives a musical note, which shows that it vibrates and is therefore stiff or elastic for high frequency stress.

    Residual Charges in Dielectrics.--In close connexion with this lies the phenomenon of residual charge in dielectrics.[14] If a glass Leyden jar is charged and then discharged and allowed to stand awhile, a second discharge can be obtained from it, and in like manner a third, and so on. The reappearance of the residual charge is promoted by tapping the glass.

    It has been shown that this behaviour of dielectrics can be imitated by a mechanical model consisting of a series of perforated pistons placed in a tube of oil with spiral springs between each piston.[15] If the pistons are depressed and then released, and then the upper piston fixed awhile, a second discharge can be obtained from it, and the mechanical stress-strain diagram of the model is closely similar to the discharge curve of a dielectric. R.H.A.

    Kohlrausch called attention to the close analogy between residual charge and the elastic recovery of strained bodies such as twisted wire or glass threads. If a charged condenser is suddenly discharged and then insulated, the reappearance of a potential difference between its coatings is analogous to the reappearance of a torque in the case of a glass fibre which has been twisted, released suddenly, and then gripped again at the ends.

    For further information on the qualities of dielectrics the reader is
    referred to the following sources:--J. Hopkinson, "On the Residual
    Charge of the Leyden Jar," Phil. Trans., 1876, 166 [ii.], p. 489,
    where it is shown that tapping the glass of a Leyden jar permits the
    reappearance of the residual charge; "On the Residual Charge of the
    Leyden Jar," ib. 167 [ii.], p. 599, containing many valuable
    observations on the residual charge of Leyden jars; W.E. Ayrton and J.
    Perry, "A Preliminary Account of the Reduction of Observations on
    Strained Material, Leyden Jars and Voltameters," Proc. Roy.

    Soc.,
    1880, 30, p. 411, showing experiments on residual charge of condensers
    and a comparison between the behaviour of dielectrics and glass fibres
    under torsion. In connexion with this paper the reader may also be
    referred to one by L. Boltzmann, "Zur Theorie der elastischen
    Nachwirkung," Wien. Acad. Sitz.-Ber., 1874, 70.

    Distribution of Electricity on Conductors.--We now proceed to
    consider in more detail the laws which govern the distribution of
    electricity at rest upon conductors. It has been shown above that the
    potential due to a charge of q units placed on a very small sphere,
    commonly called a point-charge, at any distance x is q/x. The
    mathematical importance of this function called the potential is that
    it is a scalar quantity, and the potential at any point due to any
    number of point charges q1, q2, q3, &c., distributed in any manner, is
    the sum of them separately, or

    q1/x1 + q2/x2 + q3/x3 + &c. = [Sigma](q/x) = V (17),

    where x1, x2, x3, &c., are the distances of the respective point
    charges from the point in question at which the total potential is
    required. The resultant electric force E at that point is then
    obtained by differentiating V, since E = -dV/dx, and E is in the
    direction in which V diminishes fastest. In any case, therefore, in
    which we can sum up the elementary potentials at any point we can
    calculate the resultant electric force at the same point.

    We may describe, through all the points in an electric field which
    have the same potential, surfaces called equipotential surfaces, and
    these will be everywhere perpendicular or orthogonal to the lines of
    electric force. Let us assume the field divided up into tubes of
    electric force as already explained, and these cut normally by
    equipotential surfaces. We can then establish some important
    properties of these tubes and surfaces. At each point in the field the
    electric force can have but one resultant value. Hence the
    equipotential surfaces cannot cut each other.

    Let us suppose any other
    surface described in the electric field so as to cut the closely
    compacted tubes. At each point on this surface the resultant force has
    a certain value, and a certain direction inclined at an angle [theta]
    to the normal to the selected surface at that point. Let dS be an
    element of the surface.

    Then the quantity E cos [theta]dS is the
    product of the normal component of the force and an element of the
    surface, and if this is summed up all over the surface we have the
    total electric flux or induction through the surface, or the surface
    integral of the normal force mathematically expressed by [int]E cos
    [theta]dS, provided that the dielectric constant of the medium is
    unity.

    We have then a very important theorem as follows:--If any closed
    surface be described in an electric field which wholly encloses or
    wholly excludes electrified bodies, then the total flux through this
    surface is equal to 4[pi]- times the total quantity of electricity
    within it.[16] This is commonly called Stokes's theorem. The proof is
    as follows:--Consider any point-charge E of electricity included in
    any surface S, S, S (see fig. 3), and describe through it as centre a
    cone of small solid angle d[omega] cutting out of the enclosing
    surface in two small areas dS and dS' at distances x and x'.

    Then the
    electric force due to the point charge q at distance x is q/x, and the
    resolved part normal to the element of surface dS is q cos[theta]/x^2.
    The normal section of the cone at that point is equal to dS
    cos[theta], and the solid angle d[omega] is equal to dS cos[theta]/x^2.
    Hence the flux through dS is qd[omega]. Accordingly, since the total
    solid angle round a point is 4[pi], it follows that the total flux
    through the closed surface due to the single point charge q is 4[pi]q,
    and what is true for one point charge is true for any collection
    forming a total charge Q of any form.

    Hence the total electric flux
    due to a charge Q through an enclosing surface is 4[pi]Q, and
    therefore is zero through one enclosing no electricity.

    [Illustration: FIG. 3.]

    Stokes's theorem becomes an obvious truism if applied to an
    incompressible fluid. Let a source of fluid be a point from which an
    incompressible fluid is emitted in all directions. Close to the source
    the stream lines will be radial lines. Let a very small sphere be
    described round the source, and let the strength of the source be
    defined as the total flow per second through the surface of this small
    sphere. Then if we have any number of sources enclosed by any surface,
    the total flow per second through this surface is equal to the total
    strengths of all the sources.

    If, however, we defined the strength of
    the source by the statement that the strength divided by the square
    of the distance gives the velocity of the liquid at that point, then
    the total flux through any enclosing surface would be 4[pi] times the
    strengths of all the sources enclosed. To every proposition in
    electrostatics there is thus a corresponding one in the hydrokinetic
    theory of incompressible liquids.

    Let us apply the above theorem to the case of a small
    parallel-epipedon or rectangular prism having sides dx, dy, dz
    respectively, its centre having co-ordinates (x, y, z). Its angular
    points have then co-ordinates (x [+-] 1/2 dx, y [+-] 1/2 dy, z [+-]
    1/2 dz). Let this rectangular prism be supposed to be wholly filled up
    with electricity of density [rho]; then the total quantity in it is
    [rho] dx dy dz. Consider the two faces perpendicular to the x-axis.
    Let V be the potential at the centre of the prism, then the normal
    forces on the two faces of area dy.dx are respectively

    /dV 1 d^2V \ /dV 1 d^2V \
    - ( -- + -- ---- dx ) and ( -- - -- ---- dx ),
    \dx 2 dx^2 / \dx 2 dx^2 /

    and similar expressions for the normal forces to the other pairs of
    faces dx.dy, dz.dx. Hence, multiplying these normal forces by the
    areas of the corresponding faces, we have the total flux parallel to
    the x-axis given by -(d^2V/dx^2)dx dy dz, and similar expressions for
    the other sides. Hence the total flux is

    /d^2V d^2V d^2V\
    - ( ---- + ---- + ---- ) dx dy dz
    \dx^2 dy^2 dz^2/

    and by the previous theorem this must be equal to 4[pi][rho]dx dy dz.

    d^2V d^2V d^2V
    Hence ---- + ---- + ---- + 4[pi][rho] = 0 (18).
    dx^2 dy^2 dz^2

    This celebrated equation was first given by S.D. Poisson, although
    previously demonstrated by Laplace for the case when [rho] = 0. It
    defines the condition which must be fulfilled by the potential at any
    and every point in an electric field, through which [rho] is finite
    and the electric force continuous. It may be looked upon as an
    equation to determine [rho] when V is given or vice versa. An exactly
    similar expression holds good in hydrokinetics, provided that for the
    electric potential we substitute velocity potential, and for the
    electric force the velocity of the liquid.

    The Poisson equation cannot, however, be applied in the above form to
    a region which is partly within and partly without an electrified
    conductor, because then the electric force undergoes a sudden change
    in value from zero to a finite value, in passing outwards through the
    bounding surface of the conductor. We can, however, obtain another
    equation called the "surface characteristic equation" as
    follows:--Suppose a very small area dS described on a conductor having
    a surface density of electrification [sigma]. Then let a small, very
    short cylinder be described of which dS is a section, and the
    generating lines are normal to the surface.

    Let V1 and V2 be the
    potentials at points just outside and inside the surface dS, and let
    n1 and n2 be the normals to the surface dS drawn outwards and inwards;
    then -dV1/dn1 and -dV2/dn2 are the normal components of the force over
    the ends of the imaginary small cylinder. But the force perpendicular
    to the curved surface of this cylinder is everywhere zero. Hence the
    total flux through the surface considered is -{(dV1/dn1) +
    (dV2/dn2)}dS, and this by a previous theorem must be equal to
    4[pi][sigma]dS, or the total included electric quantity. Hence we have
    the surface characteristic equation,[17]

    (dV1/dn1) + (dV2/dn2) + 4[pi][sigma] = 0 (19).

    Let us apply these theorems to a portion of a tube of electric force.
    Let the part selected not include any charged surface. Then since the
    generating lines of the tube are lines of force, the component of the
    electric force perpendicular to the curved surface of the tube is
    everywhere zero. But the electric force is normal to the ends of the
    tube. Hence if dS and dS' are the areas of the ends, and +E and -E'
    the oppositely directed electric forces at the ends of the tube, the
    surface integral of normal force on the flux over the tube is

    EdS - E'dS' (20),

    and this by the theorem already given is equal to zero, since the tube
    includes no electricity. Hence the characteristic quality of a tube of
    electric force is that its section is everywhere inversely as the
    electric force at that point. A tube so chosen that EdS for one
    section has a value unity, is called a unit tube, since the product of
    force and section is then everywhere unity for the same tube.

    In the next place apply the surface characteristic equation to any
    point on a charged conductor at which the surface density is [sigma].
    The electric force outward from that point is -dV/dn, where dn is a
    distance measured along the outwardly drawn normal, and the force
    within the surface is zero. Hence we have

    -dV/dn = 4.0[pi][sigma] or [sigma] = -(1/4 [pi])dV/dn = E/4[pi].

    The above is a statement of Coulomb's law, that the electric force at
    the surface of a conductor is proportional to the surface density of
    the charge at that point and equal to 4[pi] times the density
    .[18]

    If we define the positive direction along a tube of electric force as
    the direction in which a small body charged with positive electricity
    would tend to move, we can summarize the above facts in a simple form
    by saying that, if we have any closed surface described in any manner
    in an electric field, the excess of the number of unit tubes which
    leave the surface over those which enter it is equal to 4[pi]-times
    the algebraic sum of all the electricity included within the surface
    .

    Every tube of electric force must therefore begin and end on
    electrified surfaces of opposite sign, and the quantities of positive
    and negative electricity on its two ends are equal, since the force E
    just outside an electrified surface is normal to it and equal to
    [sigma]/4[pi], where [sigma] is the surface density; and since we have
    just proved that for the ends of a tube of force EdS = E^1dS', it
    follows that [sigma]dS = [sigma]'dS', or Q = Q', where Q and Q' are
    the quantities of electricity on the ends of the tube of force.
    Accordingly, since every tube sent out from a charged conductor must
    end somewhere on another charge of opposite sign, it follows that the
    two electricities always exist in equal quantity, and that it is
    impossible to create any quantity of one kind without creating an
    equal quantity of the opposite sign.

    [Illustration: FIG. 4.]

    We have next to consider the energy storage which takes place when
    electric charge is created, i.e. when the dielectric is strained or
    polarized. Since the potential of a conductor is defined to be the
    work required to move a unit of positive electricity from the surface
    of the earth or from an infinite distance from all electricity to the
    surface of the conductor, it follows that the work done in putting a
    small charge dq into a conductor at a potential v is v dq. Let us then
    suppose that a conductor originally at zero potential has its
    potential raised by administering to it small successive doses of
    electricity dq.

    The first raises its potential to v, the second to v'
    and so on, and the nth to V. Take any horizontal line and divide it
    into small elements of length each representing dq, and draw vertical
    lines representing the potentials v, v', &c., and after each dose.
    Since the potential rises proportionately to the quantity in the
    conductor, the ends of these ordinates will lie on a straight line and
    define a triangle whose base line is a length equal to the total
    quantity Q and height a length equal to the final potential V.

    The
    element of work done in introducing the quantity of electricity dq at
    a potential v is represented by the element of area of this triangle
    (see fig. 4), and hence the work done in charging the conductor with
    quantity Q to final potential V is 1/2 QV, or since Q = CV, where C is
    its capacity, the work done is represented by 1/2 CV^2 or by 1/2 Q^2/C.

    If [sigma] is the surface density and dS an element of surface, then
    [int][sigma]dS is the whole charge, and hence 1/2 [int] V[sigma]dS is
    the expression for the energy of charge of a conductor.

    We can deduce a remarkable expression for the energy stored up in an
    electric field containing electrified bodies as follows:[19] Let V
    denote the potential at any point in the field. Consider the integral

    1 / / / | /dV\^2 /dV\^2 /dV\^2 |
    W = ----- | | | |(----) + (----) + (----) | dx dy dz. (21)
    8[pi]
    /// |\dx/ \dy/ \dz/ |

    where the integration extends throughout the whole space unoccupied by
    conductors. We have by partial integration

    / / / /dV\^2 / / dV / / / d^2V
    | | |(----) dx dy dz = | | V -- dy dz - | | | V ---- dx dy dz,
    /// \dx/ // dx /// dx^2

    and two similar equations in y and z. Hence

    1 / / / | /dV\^2 /dV\^2 /dV\^2 |
    ----- | | | | (----) + (----) + (----) | dx dy dz =
    8[pi]
    /// | \dx/ \dy/ \dz/ |

    1 / / dV 1 / / /
    ----- | | V -- dS - ----- | | | V[nabla]V dx dy dz (22)
    8[pi]
    // dn 8[pi]///

    where dV/dn means differentiation along the normal, and [nabla] stands

    d^2 d^2 d^2
    for the operator ---- + ---- + ----. Let E be the resultant electric
    dx^2 dy^2 dz^2

    force at any point in the field. Then bearing in mind that [sigma] =
    (1/4 [pi])dV/dn, and [rho] = -(1/4 [pi])[nabla]V, we have finally

    1 / / / 1 / / 1 / / /
    ----- | | | E^2dv = -- | | V[sigma]dS + -- | | | V[rho]dv.
    8[pi] /// 2 // 2 ///

    The first term on the right hand side expresses the energy of the
    surface electrification of the conductors in the field, and the second
    the energy of volume density (if any). Accordingly the term on the
    left hand side gives us the whole energy in the field.

    Suppose that the dielectric has a constant K, then we must multiply
    both sides by K and the expression for the energy per unit of volume
    of the field is equivalent to 1/2 DE where D is the displacement or
    polarization in the dielectric.

    Furthermore it can be shown by the application of the calculus of
    variations that the condition for a minimum value of the function W,
    is that [nabla]V = 0. Hence that distribution of potential which is
    necessary to satisfy Laplace's equation is also one which makes the
    potential energy a minimum and therefore the energy stable. Thus the
    actual distribution of electricity on the conductor in the field is
    not merely a stable distribution, it is the only possible stable
    distribution.

    [Illustration: FIG. 5.]

    Method of Electrical Images.--A very powerful method of attacking
    problems in electrical distribution was first made known by Lord
    Kelvin in 1845 and is described as the method of electrical
    images.[20] By older mathematical methods it had only been possible to
    predict in a few simple cases the distribution of electricity at rest
    on conductors of various forms. The notion of an electrical image may
    be easily grasped by the following illustration: Let there be at A
    (see fig. 5) a point-charge of positive electricity +q and an infinite
    conducting plate PO, shown in section, connected to earth and
    therefore at zero potential.

    Then the charge at A together with the
    induced surface charge on the plate makes a certain field of electric
    force on the left of the plate PO, which is a zero equipotential
    surface. If we remove the plate, and yet by any means can keep the
    identical surface occupied by it a plane of zero potential, the
    boundary conditions will remain the same, and therefore the field of
    force to the left of PO will remain unaltered.

    This can be done by
    placing at B an equal negative point-charge -q in the place which
    would be occupied by the optical image of A if PO were a mirror, that
    is, let -q be placed at B, so that the distance BO is equal to the
    distance AO, whilst AOB is at right angles to PO. Then the potential
    at any point P in this ideal plane PO is equal to q/AP - q/BP = O,
    whilst the resultant force at P due to the two point charges is
    2qAO/AP^3, and is parallel to AB or normal to PO.

    Hence if we remove
    the charge -q at B and distribute electricity over the surface PO with
    a surface density [sigma], according to the Coulomb-Poisson law,
    [sigma] = qAO/2[pi]AP^3, the field of force to the left of PD will
    fulfil the required boundary conditions, and hence will be the law of
    distribution of the induced electricity in the case of the actual
    plate. The point-charge -q at B is called the "electrical image" of
    the point-charge +q at A.

    We find a precisely analogous effect in optics which justifies the
    term "electrical image." Suppose a room lit by a single candle. There
    is everywhere a certain illumination due to it. Place across the room
    a plane mirror. All the space behind the mirror will become dark, and
    all the space in front of the mirror will acquire an exalted
    illumination. Whatever this increased illumination may be, it can be
    precisely imitated by removing the mirror and placing a second lighted
    candle at the place occupied by the optical image of the first candle
    in the mirror, that is, as far behind the plane as the first candle
    was in front.

    So the potential distribution in the space due to the
    electric point-charge +q as A together with -q at B is the same as
    that due to +q at A and the negative induced charge erected on the
    infinite plane (earthed) metal sheet placed half-way between A and B.

    [Illustration: FIG. 6.]

    The same reasoning can be applied to determine the electrical image of
    a point-charge of positive electricity in a spherical surface, and
    therefore the distribution of induced electricity over a metal sphere
    connected to earth produced by a point-charge near it. Let +q be any
    positive point-charge placed at a point A outside a sphere (fig. 6) of
    radius r, and centre at C, and let P be any point on it. Let CA = d.
    Take a point B in CA such that CB.CA = r^2, or CB = r^2/d. It is easy
    then to show that PA : PB = d : r. If then we put a negative
    point-charge -qr/d at B, it follows that the spherical surface will be
    a zero potential surface, for

    q/PA - rq/d . 1/PB = 0 (24).

    Another equipotential surface is evidently a very small sphere
    described round A. The resultant force due to these two point-charges
    must then be in the direction CP, and its value E is the vector sum of
    the two forces along AP and BP due to the two point-charges. It is not
    difficult to show that

    E = -(d^2 - r^2)q/rAP^3 (25),

    in other words, the force at P is inversely as the cube of the
    distance from A. Suppose then we remove the negative point-charge, and
    let the sphere be supposed to become conductive and be connected to
    earth. If we make a distribution of negative electricity over it,
    which has a density [sigma] varying according to the law

    [sigma] = -(d^2 - r^2)q/4[pi]rAP^3 (26),

    that distribution, together with the point-charge +q at A, will make a
    distribution of electric force at all points outside the sphere
    exactly similar to that which would exist if the sphere were removed
    and a negative point charge -qr/d were placed at B. Hence this charge
    is the electrical image of the charge +q at A in the spherical
    surface.

    We may generalize these statements in the following theorem, which is
    an important deduction from a wider theorem due to G. Green. Suppose
    that we have any distribution of electricity at rest over conductors,
    and that we know the potential at all points and consequently the
    level or equipotential surfaces. Take any equipotential surface
    enclosing the whole of the electricity, and suppose this to become an
    actual sheet of metal connected to the earth. It is then a zero
    potential surface, and every point outside is at zero potential as far
    as concerns the electric charge on the conductors inside.

    Then if U is
    the potential outside the surface due to this electric charge inside
    alone, and V that due to the opposite charge it induces on the inside
    of the metal surface, we must have U + V = 0 or U = -V at all points
    outside the earthed metal surface. Therefore, whatever may be the
    distribution of electric force produced by the charges inside taken
    alone, it can be exactly imitated for all space outside the metal
    surface if we suppose the inside charge removed and a distribution of
    electricity of the same sign made over the metal surface such that its
    density follows the law

    [sigma]= -(1/4 [pi])dU/dn (27),

    where dU/dn is the electric force at that point on the closed
    equipotential surface considered, due to the original charge alone.

    BIBLIOGRAPHY.--For further developments of the subject we must refer
    the reader to the numerous excellent treatises on electrostatics now
    available. The student will find it to be a great advantage to read
    through Faraday's three volumes entitled Experimental Researches on
    Electricity
    , as soon as he has mastered some modern elementary book
    giving in compact form a general account of electrical phenomena. For
    this purpose he may select from the following books: J. Clerk Maxwell,
    Elementary Treatise on Electricity (Oxford, 1881); J.J.

    Thomson,
    Elements of the Mathematical Theory of Electricity and Magnetism
    (Cambridge, 1895); J.D. Everett, Electricity, founded on part iii.
    of Deschanel's Natural Philosophy (London, 1901); G.C. Foster and
    A.W. Porter, Elementary Treatise on Electricity and Magnetism
    (London, 1903); S.P. Thompson, Elementary Lessons on Electricity and
    Magnetism
    (London, 1903).

    When these elementary books have been digested, the advanced student
    may proceed to study the following: J. Clerk Maxwell, A Treatise on
    Electricity and Magnetism
    (1st ed., Oxford, 1873; 2nd ed. by W.D.
    Niven, 1881; 3rd ed. by J.J. Thomson, 1892); Joubert and Mascart,
    Electricity and Magnetism, English translation by E. Atkinson
    (London, 1883); Watson and Burbury, The Mathematical Theory of
    Electricity and Magnetism
    (Oxford, 1885); A. Gray, A Treatise on
    Magnetism and Electricity
    (London, 1898).

    In the collected
    Scientific Papers of Lord Kelvin (3 vols., Cambridge, 1882), of
    James Clerk Maxwell (2 vols., Cambridge, 1890), and of Lord Rayleigh
    (4 vols., Cambridge, 1903), the advanced student will find the means
    for studying the historical development of electrical knowledge as it
    has been evolved from the minds of some of the master workers of the
    19th century. (J. A. F.)

    FOOTNOTES:

    [1] See Maxwell, Elementary Treatise on Electricity (Oxford, 1881),
    p. 47.

    [2] See Maxwell, Treatise on Electricity and Magnetism (3rd ed.,
    Oxford, 1892), vol. i. p. 80.

    [3] Maxwell, Ibid. vol. i. S 74a; also Electrical Researches of the
    Hon. Henry Cavendish
    , edited by J. Clerk Maxwell (Cambridge, 1879),
    p. 104.

    [4] Laplace (Mec. Cel. vol. i. ch. ii.) gave the first direct
    demonstration that no function of the distance except the inverse
    square can satisfy the condition that a uniform spherical shell
    exerts no force on a particle within it.

    [5] The solution of the problem of determining the distribution on an
    ellipsoid of a fluid the particles of which repel each other with a
    force inversely as the nth power of the distance was first given by
    George Green (see Ferrer's edition of Green's Collected Papers, p.
    119, 1871).

    [6] See Thomson and Tait, Treatise on Natural Philosophy, S 519.

    [7] See article "Electricity," Encyclopaedia Britannica (9th
    edition), vol. viii. p. 30. The reader is also referred to an article
    by Lord Kelvin (Reprint of Papers on Electrostatics and Magnetism,
    p. 178), entitled "Determination of the Distribution of Electricity
    on a Circular Segment of a Plane, or Spherical Conducting Surface
    under any given Influence," where another equivalent expression is
    given for the capacity of an ellipsoid.

    [8] See Maxwell, Electricity and Magnetism, vol. i. pp. 284-305
    (3rd ed., 1892).

    [9] It is an interesting fact that Cavendish measured capacity in
    "globular inches," using as his unit the capacity of a metal ball, 1
    in. in diameter. Hence multiplication of his values for capacities by
    2.54 reduces them to E.S. units in the C.G.S. system. See Elec.
    Res.
    p. 347.

    [10] For fuller details of these methods of comparison of capacities
    see J.A. Fleming, A Handbook for the Electrical Laboratory and
    Testing Room
    , vol. ii. ch. ii. (London, 1903).

    [11] See Fleming, Handbook for the Electrical Laboratory, vol. ii.
    p. 130.

    [12] Faraday, Experimental Researches on Electricity, vol. i. S
    1252. For a very complete set of tables of dielectric constants of
    solids, liquids and gases see A. Winkelmann, Handbuch der Physik,
    vol. iv. pp. 98-148 (Breslau, 1905); also see Landolt and Bornstein's
    Tables of Physical Constants (Berlin, 1894).

    [13] See the following papers by J.A. Fleming and James Dewar on
    dielectric constants at low temperatures: "On the Dielectric Constant
    of Liquid Oxygen and Liquid Air," Proc. Roy. Soc., 1897, 60, p.
    360; "Note on the Dielectric Constant of Ice and Alcohol at very low
    Temperatures," ib., 1897, 61, p. 2; "On the Dielectric Constants of
    Pure Ice, Glycerine, Nitrobenzol and Ethylene Dibromide at and above
    the Temperature of Liquid Air," id. ib. p. 316; "On the Dielectric
    Constant of Certain Frozen Electrolytes at and above the Temperature
    of Liquid Air," id. ib. p.

    299--this paper describes the cone
    condenser and methods used; "Further Observations on the Dielectric
    Constants of Frozen Electrolytes at and above the Temperature of
    Liquid Air," id. ib. p. 381; "The Dielectric Constants of Certain
    Organic Bodies at and below the Temperature of Liquid Air," id. ib.
    p. 358; "On the Dielectric Constants of Metallic Oxides dissolved or
    suspended in Ice cooled to the Temperature of Liquid Air," id. ib. p.
    368.

    [14] See Faraday, Experimental Researches, vol. i. S 1245; R.H.A.
    Kohlrausch, Pogg. Ann., 1854, 91; see also Maxwell, Electricity
    and Magnetism
    , vol. i. S 327, who shows that a composite or
    stratified dielectric composed of layers of materials of different
    dielectric constants and resistivities would exhibit the property of
    residual charge.

    [15] Fleming and Ashton, "On a Model which imitates the behaviour of
    Dielectrics." Phil. Mag., 1901 [6], 2, p. 228.

    [16] The beginner is often puzzled by the constant appearance of the
    factor 4[pi] in electrical theorems. It arises from the manner in
    which the unit quantity of electricity is defined. The electric force
    due to a point-charge q at a distance r is defined to be q/r^2, and
    the total flux or induction through the sphere of radius r is
    therefore 4[pi]q. If, however, the unit point charge were defined to
    be that which produces a unit of electric flux through a
    circumscribing spherical surface or the electric force at distance r
    defined to be 1/4 [pi]r^2, many theorems would be enunciated in
    simpler forms.

    [17] See Maxwell, Electricity and Magnetism, vol. i. S 78b (2nd
    ed.).

    [18] Id. ib. vol. i. S 80. Coulomb proved the proportionality of
    electric surface force to density, but the above numerical relation E
    = 4[pi][sigma] was first established by Poisson.

    [19] See Maxwell, Electricity and Magnetism, vol. i. S 99a (3rd
    ed., 1892), where the expression in question is deduced as a
    corollary of Green's theorem.

    [20] See Lord Kelvin's Papers on Electrostatics and Magnetism, p.
    144.

    ELECTROTHERAPEUTICS, a general term for the use of electricity in therapeutics, i.e. in the alleviation and cure of disease. Before the different forms of medical treatment are dealt with, a few points in connexion with the machines and currents, of special interest to the medical reader, must first be given.

    Faradism.--For the battery required either for faradism or galvanism, cells of the Leclanche type are the most satisfactory. Being dry they can be carried in any position, are lighter, and there is no trouble from the erosion of wires and binding screws, such as so often results from wet cells. The best method of producing a smooth current in the secondary coil is for the interruptor hammer to vibrate directly against the iron core of the primary coil.

    For this it is best that the interruptor be made of a piece of steel spring, as a high rate of interruption can then be maintained, with a fairly smooth current in the secondary coil. This form of interruptor necessitates that the iron core be fixed, and variation in the primary induced current is arranged for by slipping a brass tube more or less over the iron core, thus cutting off the magnetic field from the primary coil.

    The secondary current (that obtained from the secondary coil) can be varied by keeping the secondary coil permanently fixed over the primary and varying the strength of the primary current. Where, as suggested above, the iron core is fixed, the primary and secondary induced currents will be at their strongest when the brass tube is completely withdrawn.

    As there is no simple means of measuring the strength of the faradic current, it is best to start with a very weak current, testing it on the muscles of one's own hand until these begin to contract and a definite sensory effect is produced; the current can then be applied to the part, being strengthened only very gradually.

    Galvanism.--For treatment by galvanism a large battery is needed, the simplest form being known as a "patient's battery," consisting of a variable number of dry cells arranged in series. The cells used are those of Leclanche, with E.M.F. (or voltage) of 1.5 and an internal resistance of .3 ohm. Thus the exact strength of the current is known; the number of cells usually employed is 24, and when new give an E.M.F. of about 36 volts.

    By using the formula C = E/R, where E is the voltage of the battery, R the total resistance of battery, electrodes and the patient's skin and tissues, and C the current in amperes, the number of cells required for any particular current can be worked out. The resistance of the patient's skin must be made as low as possible by thoroughly wetting both skin and electrodes with sodium bicarbonate solution, and keeping the electrodes in very close apposition to the skin.

    A galvanometer is always fitted to the battery, usually of the d'Arsonval type, with a shunt by means of which, on turning a screw, nine-tenths of the inducing current can be short-circuited away, and the solenoid only influenced by one-tenth of the current which is being used on the patient. In districts where electric power is available the continuous current can be used by means of a switchboard.

    A current of much value for electrotherapeutic purposes is the sinusoidal current, by which is meant an alternating current whose curve of electromotive force, in both positive and negative phase, varies constantly and smoothly in what is known as the sine curve. In those districts supplied by an alternating current, the sinusoidal current can be obtained from the mains by passing it through various transformers, but where the main supply is the direct or constant current, a motor transformer is needed.

    Static Electricity.--For treatment by static electricity the Wimshurst type of machine is the one most generally used. A number of electrodes are required; thus for the application of sparks a brass ball and brass roller electrode, for the "breeze" a single point and a multiple point electrode, and another multiple point electrode in the form of a metal cap that can be placed over the patient's head.

    The polarity of the machine must always be tested, as either knob may become positive or negative, though the polarity rarely changes when once the machine is in action. The oldest method of subjecting a patient to electric influence is that in which static electricity is employed. The patient is insulated on a suitable platform and treated by means of charges and discharges from an electrical machine. The effect is to increase the regularity and frequency of the pulse, raise the blood pressure and increase the action of the skin.

    The nervous system is quieted, sleep being promoted, the patient often becoming drowsy during the application. If while the patient is being treated a point electrode is brought towards him he feels the sensation of a wind blowing from that point; this is an electric breeze or brush discharge. The breeze is negative if the patient is positively charged and vice versa. The "breeze discharge" treatment is especially valuable in subduing pain of the superficial cutaneous nerves, and also in the treatment of chronic indolent ulcers.

    Quite recently this form of treatment has been applied with much success to various skin lesions--psoriasis, eczema and pruritus. Static electricity is also utilized for medical purposes by means of "sparks," which are administered with a ball electrode, the result being a sudden muscular contraction at the point of application.

    The electrode must be rapidly withdrawn before a second spark has time to leap across, as this is a severe form of treatment and must be administered slowly. It is mainly employed for muscular stimulation, and the contractions resulting from spark stimulation can be produced in cases of nerve injury and degeneration, even when the muscles have lost their reaction to faradism. The sensory stimulation of this form of treatment is also strong, and is useful in hysterical anaesthesia and functional paralysis.

    Where a milder sensory stimulation is required friction can be used, the electrode being in the form of a metal roller which is moved rapidly outside the patient's clothing over the spine or other part to be treated. The clothing must be dry and of wool, and each additional woollen layer intensifies the effect.

    Another method of employing electricity at high potential is by the employment of high frequency currents. There are two methods of application: that in which brush discharges are made use of, with undoubtedly good effects in many of the diseases affecting the surface of the body, and that in which the currents of the solenoid are made to traverse the patient directly. The physiological value of the latter method is not certain, though one point of interest in connexion with it is that whereas statical applications raise the blood pressure, high frequency applications lower it.

    It has been used in the case of old people with arterio-sclerosis, and the reduction of blood pressure produced is said to have shown considerable permanence.

    The Faradic Current.--G.B. Duchenne was the first physician to make use of the induced current for treatment, and the term "faradization" is supposed to be due to him. But in his day the differences between the two currents available, the primary and the secondary, were not worked out, and they were used somewhat indiscriminately.

    Nowadays it is generally accepted that the primary current should be used for the stimulation of deep-lying organs, as stomach and intestines, &c., while the secondary current is employed for stimulation of the limb muscles and the cutaneous sensory nerves. The faradic current is also used as a means of diagnosis for neuro-muscular conditions.

    When the interrupted current is used to stimulate the skin over a motor nerve, all the muscles supplied by that nerve are thrown into rapid tetanic contraction, the contraction both beginning and ceasing sharply and suddenly with the current. This is the normal reaction of the nerve to faradism. If the muscle be wasted from disuse or some local cause unconnected with its nerve-supply, the contraction is smaller, and both arises and relaxes more slowly.

    But if the lesion lies in the nerve itself, as in Bell's palsy, the muscles no longer show any response when the nerve is stimulated, and this is known as the reaction of degeneration in the nerve. It is usually preceded by a condition of hyperexcitability. These results are applied to distinguish between functional paralysis and that due to some organic lesion, as in the former case the reaction of faradism will be as brisk as usual.

    Also at the beginning of most cases of infantile paralysis many more groups of muscles appear to be affected than ultimately prove to be, and faradism enables the physician to distinguish between those groups of muscles that are permanently paralysed owing to the destruction of their trophic centre, and those muscles which are only temporarily inhibited from shock, and which with proper treatment will later regain their full power.

    In the testing of muscles electrically that point on the skin which on stimulation gives the maximum contraction for that muscle is known as the "motor point" for that muscle. It usually corresponds to the entry of the motor nerve. Faradic treatment may be employed in the weakness and emaciation depending on any long illness, rickets, anaemia, &c. For these cases it is best to use the electric bath, the patient being placed in warm water, and the two electrodes, one at the patient's back and the other at his feet, being connected with the secondary coil.

    The patient's general metabolism is stimulated, he eats and sleeps better and soon begins to put on weight. This is especially beneficial in severe cases of rickets. In the weakness and emaciation due to neurasthenia, especially in those cases being treated by the Weir Mitchell method (isolation, absolute confinement to bed, massage and overfeeding), a similar faradic bath is a very helpful adjunct. In tabes dorsalis faradic treatment will often diminish the anaesthesia and numbness in the legs, with resulting benefit to the ataxy.

    Perhaps the most beneficial use of the faradic current is in the treatment of chronic constipation--especially that so frequently met with in young women and due to deficient muscular power of the intestinal walls. In long-standing cases the large intestine becomes permanently dilated, and its muscular fibres so attenuated as to have no power over the intestinal contents. But faradism causes contraction at the point of stimulation, and the peristaltic wave thus started slowly progresses along the bowel.

    All that is needed is a special electrode for introduction into the bowel and an ordinary roller electrode. The rectal electrode consists of a 6-inch wire bearing at one end a small metal knob and fitted at the other into a metal cup which screws into the handle of the electrode. The only part exposed is the metallic knob; the rest is coated with some insulating material. The patient reclines on a couch on his back, the rectal electrode is connected, and having been vaselined is passed some three inches into the rectum.

    A current is started with the secondary coil in such a position as to give only an extremely weak current. The roller electrode is then wetted with hot water and applied to the front of the abdomen. At first the patient should feel nothing, but the current should slowly be increased until a faint response is perceptible from the abdominal muscles. This gives the required strength, and the roller electrode, pressed well into the abdominal wall, should very slowly be moved along the course of the large intestine beginning at the right iliac fossa.

    Thus a combination of massage and faradic current is obtained, and the results are particularly satisfactory. Treatment should be given on alternate days immediately after breakfast, and should be persevered with for six or eight weeks. The patient can be taught to administer it to himself.

    The Galvanic, Continuous or Direct Current.--In using the galvanic or direct current the electrode must be covered with padded webbing or some other absorbent material, the metal of the electrode never being allowed to come in contact with the skin. The padding by retaining moisture helps to make good contact, and also helps to guard against burning the skin. But when a continuous current of 3 am. or more is passed for more than 5 min. the electrodes must be raised periodically and the skin inspected. If the current be too strong or applied for too long a time, small blisters are raised which break and are very troublesome to heal.

    Nor does the patient always feel much pain when this occurs. Also the electrodes must be remoistened every five or six minutes, as they soon become dry, and the skin will then be burnt. It is best to use a solution of sodium bicarbonate. Again, the danger of burning the skin depends on the density of the current per sq. in. of electrode, so that a strong current through a small electrode will burn the skin, whereas the same current through a larger electrode will produce a beneficial effect.

    If the patient be immersed up to his neck in an electric bath, much stronger currents can be passed without causing either pain or injury, as in this case the whole area of the skin in contact with the water acts as an electrode. In passing the current it must be remembered that the negative electrode or kathode is the more painful of the two, and its action more stimulating than the positive electrode or anode, which is sedative. If a muscle be stimulated over its motor point, it will contract with a sharp twitch and then become quiescent.

    With normal muscle the KCC (kathodal closure contraction) is stronger than that produced by the closure of the current at the anode ACC (anodal closure contraction). And if the muscle be normal the opening contraction KOC and AOC are not seen. When a galvanic current is passed along a nerve its excitability is increased at the kathode and diminished at the anode. The increased excitability at the kathode is katelectrotonus, and the lowered excitability at the anode anelectrotonus.

    But since in a patient the electrode cannot be applied directly to the nerve, the lines of force from the electrode pass into the nerve both in an upward and downward direction, and hence there are two poles produced by each electrode. If the current be suddenly reversed, so that what was the anode becomes the kathode, a stronger contraction is obtained than by simply making and breaking the current.

    To avoid the four poles on the nerve to be tested, it is found most satisfactory to have one electrode placed at some distance, on the back or chest, not on the same limb.

    As explained above, when the nerve supplying a muscle is diseased it no longer responds to the faradic current. On further testing this with the galvanic or continuous current it responds, but the contraction is not brisk but begins slowly and relaxes slowly, though the contraction as a whole may be larger than that of a normal muscle. This excessive contraction is known as hyperexcitability to galvanism. This form of contraction is that obtained when the muscle fibre itself is stimulated.

    Again, whereas in normal muscle KCC > ACC, when the nerve is degenerated KCC = ACC or ACC > KCC. Also in the more severe forms of nerve injury tetanic contractions may be set up in the paralysed muscles, by closure of the current either at the anode or kathode. These charges are known as the reaction of degeneration or RD, and are of great value in diagnosis. They occur only after sudden or acute damage to the nerve cells of the anterior horn of the spinal cord, or to the motor nerve fibres proceeding from these cells.

    Thus RD is present in infantile paralysis, acute neuritis, &c., but absent in progressive muscular atrophy where the wasting of nerve and muscle takes place extremely slowly. The reaction of degeneration in the nerve is shown by disappearance of reaction to either kind of current, preceded for some days by hyperexcitability to either current.

    Where the muscle wasting is due to a lesion in the muscle alone, as in ischaemic myositis (usually due to injury from tight bandaging or badly applied splints), no reaction of degeneration is found; the only change is a loss of power in the contraction. If the damage to the anterior horn cells be only very slight, there may only be partial RD, and the prognosis is given according to the extent of RD. From this account it is clear that the greatest value of the continuous current lies in its use in diagnosis.

    But it is also applied extremely successfully, in combination with massage, to cases of infantile paralysis. Wrist drop from lead poisoning and lead neuritis of all kinds, reflex muscular atrophy and the muscular wasting of hemiplegia, are all benefited by the continuous current; the severe pain of sciatica, and the inflammation of the nerve sheath in these cases, can be arrested more quickly by galvanic treatment than in any other way. Nearly all forms of neuritis, both of the cranial and other nerves, are best treated by the continuous current. The action in all cases is to stimulate the natural tendency to repair, very largely by improving the circulation through the injured parts.

    Another effect of an electric current is electrolysis, and the phenomena of electrolytic conduction involve not merely the ionization of the compounds, but also the setting in motion of the ions towards their respective poles. Solutions which conduct electric currents are called electrolytes, and in the case of the human body the electrolyte is the whole mass of the saline constituents in solution throughout the body.

    When a current is passed through an electrolyte, dissociation into ions takes place, the ions which are freed round the anode being called anions and those which are freed round the kathode being called kations.

    The anions carry negative charges and are consequently attracted by the positive electricity of the anode. The kations carry positive charges, hence they are repelled by the anode and attracted by the kathode. But a certain number of molecules do not dissociate, and hence in an electrolytic solution there are neutral molecules, anions and kations.

    The chemical actions, and thus the antiseptic, remedial or toxic effects of electrolytes, are due to the actions of their ions. The phosphides and phosphates may be taken as examples. Some are extremely toxic, while others are quite harmless. But it is to the phosphorus ion that the toxic or therapeutic effect is due. In the phosphates the phosphorus is part of a complex ion possessing quite different properties to those of the phosphorus ion of the phosphides. The strikingly different effects of the sulphates and sulphides are due to similar conditions, as also of many other compounds.

    There are certain solvents, as alcohol, chloroform, glycerin and vaseline which do not dissociate electrolytes, and consequently the latter become inert when mixed with these solvents.

    These solutions do not conduct electricity, and hence ionic effects are extremely slow. A vaseline ointment containing 5% of phenol makes a good dressing for an ulcer of the leg, and produces no irritant effect, but a 5% aqueous solution may be both caustic and toxic. Since the toxic or therapeutic action of a solution is due to its ions, the action must be proportional to the number of ions in a given volume, that is, the action of an electrolyte depends on the degree of dissociation.

    Thus a strong acid is one that is much dissociated, a weak acid one that has undergone but little dissociation and so on. In 1896-1897 it was shown that the bactericidal action of salts varies with their degree of dissociation and therefore depends on the concentration of the active ions.

    In the medical application of these facts it must be remembered that when an ion is introduced into the body by electrolysis, it is probably forced into the actual cellular constituents of the body, whereas the drug administered by one of the usual methods though circulating in the blood may perhaps never gain access to the cell itself. Hence the different effects that have been recorded between a drug administered by the mouth or subcutaneously and the same administered by electrolysis.

    Thus a solution of cocaine injected subcutaneously produces quite different effects to that introduced by electrolysis. By the latter method it produces anaesthesia but does not diffuse, and the anaesthesia remains strictly limited to the surface covered by the electrode. It would appear that the ion is never introduced into the general circulation but into the cell plasma.

    In the technical working of medical electrolysis the most minute precautions are required. The solution of the drug must be made with as pure water as possible, recently distilled. The spongy substance forming the electrode must be free from any trace of electrolytic substances.

    Hence all materials used must be washed in distilled water. Absorbent cotton answers all requirements and is easily procured. The area of introduction can be exactly circumscribed by cutting a hole in a sheet of adhesive plaster which is applied to the skin and on which the electrolytic electrodes are pressed. The great advantage of electrolytic methods is that it enables general treatment to be replaced by a strictly local treatment, and the cells can be saturated exactly to the degree and depth required.

    Strong antiseptics and materials that coagulate albumen cannot be introduced locally by ordinary methods, as the skin is impermeable to them, but by electrolysis they can be introduced to the exact depth required. The local effects of the ions depend on the dosage; thus a feeble dose of the ions of zinc stimulates the growth of hair, but a stronger dose produces the death of the tissue. Naturally the different ions produce different effects.

    Thus the ions of the alkalis and magnesium are caustic, those of the alkaline earthy metals produce actual mortification of the tissue and so on.

    According to the ion chosen the effect may be caustic in various degrees, antiseptic, coagulating, producing vascular or nervous changes, &c., &c. And again electrolysis can also be used for extracting from the body such ions as are injurious, as uric and oxalic acid from a patient suffering from gout.

    One of the latest advances is the treatment of ankylosed joints by the electrolytic method, the electrolyte used being chloride of sodium, and the marvellous results being attributed to the introduction of the chlorine ions. This sclerolytic property of the current is applicable to all parts of the body accessible to the current. Old cases of rheumatic scleritis, entirely unaffected by the routine treatment of salicylates and iodide, have often cleared up entirely under electrolytic treatment.

    Cases of chronic iritis with adhesions and old pleural adhesions are also suited for this method of procedure. Certain menstrual troubles of women and also endometritis yield rapidly to electrolysis with a zinc anode. Before this method of introduction, the zinc salts, though excellent disinfectants, acted only on the surface in consequence of their coagulating action on the albuminoids, but by the electric current, under the influence of a difference of potential, the zinc iron will penetrate to any desired depth.

    Cases of rodent ulcer unaffected by all other methods of treatment have been cured by electric kataphoresis with zinc ions, and the method is now being applied to the treatment of inoperable malignant tumours. As very strong currents are required for this latter, the patient has first to be anaesthetized by a general anaesthetic. Another direction in which electric ions are being used is that of the induction of local anaesthesia before minor surgical operations.

    Cocaine is the drug used, the resulting anaesthesia is absolute, and the operation can be made almost bloodless by the admixture of suprarenal extract.

    ELECTROTYPING, an application of the art of electroplating (q.v.) to typography (q.v.). In copying engraved plates for printing purposes, copper may be deposited upon the original plate, the surface of which is first rendered slightly dirty, by means of a weak solution of wax in turpentine or otherwise, to prevent adhesion. The reversed plate thus produced is then stripped from the first and used as cathode in its turn, with the result that even the finest lines of the original are faithfully reproduced.

    The electrolyte commonly contains about 1-1/2 lb. of copper sulphate and 1/2 lb. of strong sulphuric acid per gallon, and is worked with a current density of about 10 amperes per sq. ft., which should give a thickness of 0.000563 in. of copper per hour. As time is an object, the conditions alluded to in the article on COPPER as being favourable to the use of high current densities should be studied, bearing in mind that a tough copper deposit of high quality is essential.

    Moulds for reproducing plates or art-work are often taken in plaster, beeswax mixed with Venice turpentine, fusible metal, or gutta-percha, and the surface being rendered conductive by powdered black-lead, copper is deposited upon it evenly throughout. For statuary, and "undercut" work generally, an elastic mould--of glue and treacle (80:20 parts)--may be used; the mould, when set, is waterproofed by immersion in a solution of potassium bichromate followed by exposure to sunlight, or in some other way.

    The best results, however, are obtained by taking a wax cast from the elastic mould, and then from this a plaster mould, which may be waterproofed with wax, black-leaded, and used as cathode. In art-work of this nature the principal points to be looked to in depositing are the electrical connexions to the cathode, the shape of the anode (to secure uniformity of deposition), the circulation of the electrolyte, and, in some cases, the means for escape of anode oxygen. Silver electrotyping is occasionally resorted to for special purposes.

    ELECTRUM, ELECTRON (Gr. [Greek: elektron], amber), an alloy of gold and silver in use among the ancients, described by Pliny as containing one part of silver to four of gold. The term is also applied in mineralogy to native argentiferous gold containing from 20 to 50% of silver. In both cases the name is derived from the pale yellow colour of electrum, resembling that of amber.

    ELEGIT (Lat. for "he has chosen"), in English law, a judicial writ of execution, given by the Statute of Westminster II. (1285), and so called from the words of the writ, that the plaintiff has chosen (elegit) this mode of satisfaction. Previously to the Statute of Westminster II., a judgment creditor could only have the profits of lands of a debtor in satisfaction of his judgment, but not the possession of the lands themselves.

    But this statute provided that henceforth it should be in the election of the party having recovered judgment to have a writ of fieri facias (q.v.) unto the sheriff on lands and goods or else all the chattels of the debtor and the one half of his lands until the judgment be satisfied. Since the Bankruptcy Act 1883 the writ of elegit has extended to lands and hereditaments only. (See further EXECUTION.)

    ELEGY, a short poem of lamentation or regret, called forth by the decease of a beloved or revered person, or by a general sense of the pathos of mortality. The Greek word [Greek: elegeia] is of doubtful signification; it is usually interpreted as meaning a mournful or funeral song. But there seems to be no proof that this idea of regret for death entered into the original meaning of [Greek: elegeia].

    The earliest Greek elegies which have come down to us are not funereal, although it is possible that the primitive [Greek: elegeia] may have been a set of words liturgically used, with music, at a burial. When the elegy appears in surviving Greek literature, we find it dedicated, not to death, but to war and love. Callinus of Ephesus, who flourished in the 7th century, is the earliest elegist of whom we possess fragments. A little later Tyrtaeus was composing his famous elegies in Sparta.

    Both of these writers were, so far as we know, exclusively warlike and patriotic. On the other hand, the passion of love inspires Mimnermus, whose elegies are the prototypes not only of the later Greek pieces, and of the Latin poems of the school of Tibullus and Propertius, but of a great deal of the formal erotic poetry of modern Europe. In the 6th century B.C., the elegies of Solon were admired; they are mainly lost.

    But we possess more of the work of Theognis of Megara than of any other archaic elegist, and in it we can observe the characteristics of Greek elegy best. Here the Dorian spirit of chivalry reaches its highest expression, and war is combined with manly love.

    The elegy, in its calm movement, seems to have begun to lose currency when the ecstasy of emotion was more successfully interpreted by the various rhythmic and dithyrambic inventions of the Aeolic lyrists. The elegy, however, rose again to the highest level of merit in Alexandrian times. It was reintroduced by Philetas in the 3rd cent. B.C., and was carried to extreme perfection by Callimachus. Other later Greek elegists of high reputation were Asclepiades and Euphorion.

    But it is curious to notice that all the elegies of these poets were of an amatory nature, and that antiquity styled the funeral dirges of Theocritus, Bion and Moschus--which are to us the types of elegy--not elegies at all, but idylls. When the poets of Rome began their imitative study of Alexandrian models, it was natural that the elegies of writers such as Callimachus should tempt them to immediate imitation.

    Gallus, whose works are unhappily lost, is known to have produced a great sensation in Rome by publishing his translation of the poems of Euphorion; and he passed on to the composition of erotic elegies of his own, which were the earliest in the Latin language. If we possessed his once-famous Cytheris, we should be able to decide the question of how much Propertius, who is now the leading figure among Roman elegists, owed to the example of Gallus.

    His brilliantly emotional Cynthia, with its rich and unexampled employment of that alternation of hexameter and pentameter which had now come to be known as the elegiac measure, seems, however, to have settled the type of Latin elegy. Tibullus is always named in conjunction with Propertius, who was his contemporary, although in their style they were violently contrasted. The sweetness of Tibullus was the object of admiration and constant imitation by the Latin poets of the Renaissance, although Propertius has more austerely pleased a later taste.

    Finally, Ovid wrote elegies of great variety in subject, but all in the same form, and his dexterous easy metre closed the tradition of elegiac poetry among the ancients. What remains in the decline of Latin literature is all founded on a study of those masters of the Golden Age.

    When the Renaissance found its way to England, the word "elegy" was introduced by readers of Ovid and Propertius. But from the beginning of the 16th century, it was used in English, as it has been ever since, to describe a funeral song or lament. One of the earliest poems in English which bears the title of elegy is The Complaint of Philomene, which George Gascoigne began in 1562, and printed in 1576. The Daphnaida of Spenser (1591) is an elegy in the strict modern sense, namely a poem of regret pronounced at the obsequies of a particular person. In 1579 Puttenham had defined an elegy as being a song "of long lamentation."

    With the opening of the 17th century the composition of elegies became universal on every occasion of public or private grief. Dr Johnson's definition, "Elegy, a short poem without points or turns," is singularly inept and careless. By that time (1755) English literature had produced many great elegies, of which the Lycidas of Milton is by far the most illustrious. But even Cowley's on Crashaw, Tickell's on Addison, Pope's on an Unfortunate Lady, those of Quarles, and Dryden, and Donne, should have warned Johnson of his mistake.

    Since the 18th century the most illustrious examples of elegy in English literature have been the Adonais of Shelley (on Keats), the Thyrsis of Matthew Arnold (on Clough), and the Ave atque Vale of Mr Swinburne (on Baudelaire). It remains for us to mention what is the most celebrated elegy in English, that written by Gray in a Country Churchyard. This, however, belongs to a class apart, as it is not addressed to the memory of any particular person.

    A writer of small merit, James Hammond (1716-1742), enjoyed a certain success with his Love Elegies in which he endeavoured to introduce the erotic elegy as it was written by Ovid and Tibullus. This experiment took no hold of English literature, but was welcomed in France in the amatory works of Parny (1753-1814), in those of Chenedolle (1769-1833), and of Millevoye (1782-1816). The melancholy and sentimental elegies of the last named are the typical examples of this class of poetry in French literature.

    Lamartine must be included among the elegists, and his famous "Le Lac" is as eminent an elegy in French as Gray's "Country Churchyard" is in English. The elegy has flourished in Portugal, partly because it was cultivated with great success by Camoens, the most illustrious of the Portuguese poets. In Italian, Chiabrera and Filicaia are named among the leading national elegists. In German literature, the notion of elegy as a poem of lamentation does not exist.

    The famous Roman Elegies of Goethe imitate in form and theme those of Ovid; they are not even plaintive in character.

    ELEGIAC VERSE has commonly been adopted by German poets for their elegies, but by English poets never. Schiller defines this kind of verse, which consists of a distich of which the first line is a hexameter and the second a pentameter, in the following pretty illustration:--

    "In the hexameter rises the fountain's silvery column.
    In the pentameter aye falling in melody back."

    The word "elegy," in English, is one which is frequently used very incorrectly; it should be remembered that it must be mournful, meditative and short without being ejaculatory. Thus Tennyson's In Memoriam is excluded by its length; it may at best be treated as a collection of elegies. Wordsworth's Lucy, on the other hand, is a dirge; this is too brief a burst of emotion to be styled an elegy. Lycidas and Adonais remain the two unapproachable types of what a personal elegy ought to be in English. (E. G.)

    ELEMENT (Lat. elementum), an ultimate component of anything, hence a fundamental principle. Elementum was used in Latin to translate the Greek [Greek: stoicheion] (that which stands in a [Greek: stoichos], or row), and is a word of obscure origin and etymology. The root of Lat. alere, to nourish, has been suggested, thus making it a doublet of alimentum, that which supports life; another explanation is that the word represents LMN., the first three letters of the second part of the alphabet, a parallel use to that of ABC.

    Apart from its application in chemistry, which is treated below, the word is used of the rudiments or principia of any science or subject, as in Euclid's Elements of Geometry, or in the "beggarly elements" ([Greek: taptocha stoicheia], of St Paul in Gal. iv. 9); in mathematics, of a fundamental concept involved in an investigation, as the "elements" of a determinant; and in electricity, of a galvanic (or voltaic) "element" in an electric cell (see BATTERY: Electric).

    In astronomy, "element" is used of any one of the numerical or geometrical data by which the course of a varying phenomenon is computed; it is applied especially to orbital motion and eclipses. The "elements of an orbit" are the six data by which the position of a moving body in its orbit at any time may be determined.

    The "elements of an eclipse" express and determine the motion of the centre of the shadow-axis, and are the data necessary to compute the phenomena of an eclipse during its whole course, as seen at any place.

    In architecture the term "element" is applied to the outline of the design of a Decorated window, on which the centres for the tracery are found. These centres will all be found to fall on points which, in some way or other, will be equimultiples of parts of the openings.

    Chemical Elements.

    Ancient ideas.

    Like all other scientific concepts, that of an element has changed its meaning many times in many ways during the development of science. Owing to their very small amount of real chemical knowledge, the generalizations of the ancients were necessarily rather superficial, and could not stand in the face of the increasing development of practical chemistry. Nevertheless we find the concept of an element as "a substance from which all bodies are made or derived" held at the very beginning of occidental philosophy.

    Thales regarded "water" as the element of all things; his followers accepted his idea of a primordial substance as the basis of all bodies, but they endeavoured to determine some other general element or elements, like "fire" or "spirit," or "love" and "hatred," or "fire," "water," "air" and "earth." We find in this development an exact parallelism to the manner in which scientific ideas generally arise, develop and change.

    They are created to point out the common part in a variety of observed phenomena, in order to get some leading light in the chaos of events. At first almost any idea will do, if only it promises some comprehensive arrangement of the facts; afterwards, the inconsistencies of the first trial make themselves felt; the first idea is then changed to meet better the new requirements.

    For a shorter or longer time the facts and ideas may remain in accord, but the uninterrupted increase of empirical knowledge involves sooner or later new fundamental alterations of the general idea, and in this way there is a never-ceasing process of adaptation of the ideas to the facts. As facts are unchangeable by themselves, the adaptation can be only one-sided; the ideas are compelled to change according to the facts.

    We must therefore educate ourselves to regard the ideas or theories as the changing part of science, and keep ourselves ready to accept even the most fundamental revision of current theories.

    The first step in the development of the idea of elements was to recognize that a single principle would not prove sufficient to cover the manifoldness of facts.

    Empedocles therefore conceived a double or binary elementary principle; and Aristotle developed this idea a stage further, stating two sets of binary antagonistic principles, namely "dry-wet" and "hot-cold." The Aristotelian or peripatetic elements, which played such a great role in the whole medieval philosophy, are the representatives of the several binary combinations of these fundamental properties, "fire" being hot and dry, "air" hot and wet, "water" cold and wet, "earth" cold and dry.

    According to the amount of these properties found in any body, these elements were regarded as having taken part in forming this body. Concerning the reason why only these properties were regarded as fundamental, we know nothing. They seem to be taken at random rather than carefully selected; they relate only to the sense of touch, and not to vision or any other sense, possibly because deceptions in the sense of touch were regarded as non-existent, while the other senses were apparently not so trustworthy.

    At any rate, the Aristotelian elements soon proved to be rather inadequate to meet the requirements of the increasing chemical knowledge; other properties had therefore to be selected to represent the general behaviour of chemical substances, and in this case we find them already much more "chemical" in the modern sense.

    Elements of the alchemists.

    Among the various substances recognized by the chemists, certain classes or groups readily distinguished themselves. First the metals, by their lustre, their heaviness, and a number of other common properties.

    According to the general principle of selecting a single substance as a representative of the group, the metallic properties were represented by "mercury." The theoreticians of the middle ages were rather careful to point out that common mercury (the liquid metal of to-day) was not at all to be identified with "philosophical" mercury, the last being simply the principle of metallic behaviour.

    In the same way combustibility was represented by "sulphur," solubility by "salt," and occasionally the chemically indifferent or refractory character by "earth." According to the subsistence and preponderance of these properties in different bodies, these were regarded as containing the corresponding elements; conversely, just as experience teaches the chemist every day that by proper treatment the properties of given bodies may be changed in the most various ways, the observed changes of properties were ascribed to the gain or loss of the corresponding elements.

    According to this theory, which accounted rather well for a large number of facts, there was no fundamental objection against trying to endow base metals with the properties of the precious ones; to make artificial gold was a task quite similar to the modern problem of, e.g. making artificial quinine.

    The realization that there is a certain natural law preventing such changes is of much later date. It is therefore quite unjust to consider the work of the alchemists, who tried to make artificial gold, as consummate nonsense. A priori there was no reason why a change from lead to gold should be less possible than a change from iron to rust; indeed there is no a priori reason against it now.

    But experience has taught us that lead and gold are chemical elements in the modern sense, and that there is a general experimental law that elements are not transformable one into another. So experience taught the alchemists irresistibly that in spite of the manifoldness of chemical changes it is not always possible to change any given substance into another; the possibilities are much more limited, and there is only a certain range of substances to be obtained from a given one.

    The impossibility of transforming lead or copper into noble metals proved to be only one case out of many, and it was recognized generally that there are certain chemical families whose members are related to one another by their mutual transformability, while it is impossible to bridge the boundaries separating these families.

    Work of Robert Boyle.

    The man who brought all these experiences and considerations into scientific form was Robert Boyle. He stated as a general principle, that only tangible and ponderable substances should be recognized as elements, an element being a substance from which other substances may be made, but which cannot be separated into different substances. He showed that neither the peripatetic nor the alchemistic elements satisfied this definition.

    But he was more of a critical than of a synthetical turn of mind; although he established the correct principles, he hesitated to point out what substances, among those known at his time, were to be considered as elements. He only paved the way to the goal by laying the foundations of analytical chemistry, i.e. by teaching how to characterize and to distinguish different chemical individuals.

    Further, by adopting and developing the corpuscular hypothesis of the constitution of the ponderable substances, he foreshadowed, in a way, the law of the conservation of the elements, viz. that no element can be changed into another element; and he considered the compound substances to be made up from small particles or corpuscles of their elements, the latter retaining their essence in all combinations.

    This hypothesis accounts for the fact that only a limited number of other substances can be made from a given one--namely, only those which contain the elements present in the given substance. But it is characteristic of Boyle's critical mind that he did not shut his eyes against a serious objection to his hypothesis. If the compound substance is made up of parts of the elements, one would expect that the properties of the compound substance would prove to be the sum of the properties of the elements.

    But this is not the case, and chemical compounds show properties which generally differ very considerably from those of the compounds. On the one hand, the corpuscular hypothesis of Boyle was developed into the atomic hypothesis of Dalton, which was considered at the beginning of the 19th century as the very best representation of chemical facts, while, on the other hand, the difficulty as to the properties of the compounds remained the same as Boyle found it, and has not yet been removed by an appropriate development of the atomic hypothesis.

    Thus Boyle considered, e.g. the metals as elements. However, it is interesting to note that he considered the mutual transformation of the metals as not altogether impossible, and he even tells of a case when gold was transformed into base metal. It is a common psychological fact that a reformer does not generally succeed in being wholly consistent in his reforming ideas; there remains invariably some point where he commits exactly the same fault which he set out to abolish. We shall find the same inconsistency also among other chemical reformers.

    Even earlier than Boyle, Joachim Jung (1587-1657) of Hamburg developed similar ideas. But as he did not distinguish himself, as Boyle did, by experimental work in science, his views exerted only a limited influence amongst his pupils.

    Phlogiston theory.

    In the times following Boyle's work we find no remarkable outside development of the theory of elements, but a very important inside one.

    Analytical chemistry, or the art of distinguishing different chemical substances, was rapidly developing, and the necessary foundation for such a theory was thus laid. We find the discussions about the true elements disappearing from the text-books, or removed to an insignificant corner, while the description of observed chemical changes of different ways of preparing the same substance, as identified by the same properties, and of the methods for recognizing and distinguishing the various substances, take their place.

    The similarity of certain groups of chemical changes, as, for example, combustion, and the inverse process, reduction, was observed, and thus led to an attempt to shape these most general facts into a common theory. In this way the theory of "phlogiston" was developed by G.E. Stahl, phlogiston being (according to the usual way of regarding general properties as being due to a principle or element) the "principle of combustibility," similar to the "sulphur" of the alchemists.

    This again must be regarded as quite a legitimate step justified by the knowledge of the time. For experience taught that combustibility could be transferred by chemical action, e.g. from charcoal to litharge, the latter being changed thereby into combustible metallic lead; and according to Boyle's principle, that only bodies should be recognized as chemical elements, phlogiston was considered as a body.

    From the fact that all leading chemists in the second half of the 18th century used the phlogiston theory and were not hindered by it in making their great discoveries, it is evident that a sufficient amount of truth and usefulness was embodied in this theory.

    It states indeed quite correctly the mutual relations between oxidation and reduction, as we now call these very general processes, and was erroneous only in regard to one question, which at that time had not aroused much interest, the question of the change of weight during chemical processes.

    Lavoisier's reform.

    It was only after Isaac Newton's discovery of universal gravitation that weight was considered as a property of paramount interest and importance, and that the question of the changes of weight in chemical reactions became one worth asking. When in due time this question was raised, the fact became evident at once, that combustion means not loss but gain of weight. To be sure of this, it was necessary to know first the chemical and physical properties of gases, and it was just at the same time that this knowledge was developed by Priestley, Scheele and others. Lavoisier was the originator and expounder of the necessary reform.

    Oxygen was just discovered at that time, and Lavoisier gathered evidence from all sides that the theory of phlogiston had to be turned inside out to fit the new facts.

    He realized that the sum total of the weights of all substances concerned within a chemical change is not altered by the change. This principle of the "conservation of weight" led at once to a simple and unmistakable definition of a chemical element. As the weight of a compound substance is the sum of the weights of its elements, the compound necessarily weighs more than any of its elements.

    An element is therefore a substance which, by being changed into another substance, invariably increases its weight, and never gives rise to substances of less weight. By the help of this criterion Lavoisier composed the first table of chemical elements similar to our modern ones. According to the knowledge of his time he regarded the alkalis as elements, although he remarked that they are rather similar to certain oxides, and therefore may possibly contain oxygen; the truth of this was proved at a later date by Humphry Davy.

    But the inconsistency of the reformer, already referred to, may be observed with Lavoisier. He included "heat and light" in his list of elements, although he knew that neither of them had weight, and that neither fitted his definition of an element; this atavistic survival was subsequently removed from the table of the elements by Berzelius in the beginning of the 19th century.

    In this way the question of what substances are to be regarded as chemical elements had been settled satisfactorily in a qualitative way, but it is interesting to realize that the last step in this development, the theory of Lavoisier, was based on quantitative considerations. Such considerations became of paramount interest at once, and led to the concept of the combining weights of the elements.

    J.B. Richter's work.

    The first discoveries in this field were made in the last quarter of the 18th century by J.B. Richter. The point at issue was a rather commonplace one: it was the fact that when two neutral salt solutions were mixed to undergo mutual chemical decomposition and recombination, the resulting liquid was neutral again, i.e. it did not contain any excess of acid or base.

    In other words, if two salts, A'B' and A" B", composed of the acids A' and A" and the bases B' and B", undergo mutual decomposition, the amount of the base B' left by the first salt, when its acid A' united with the base B" to form a new salt A'B", was just enough to make a neutral salt A"B' with the acid A" left by the second salt.

    At first sight this looks quite simple and self-evident,--that neutral salts should form neutral ones again and not acid or basic ones,--but if this fact is once stated very serious quantitative inferences may be drawn from it, as Richter showed. For if the symbols A', A", B', B" denote at the same time such quantities of the acids and bases as form neutral salts, then if three of these quantities are determined, the fourth may be calculated from the others.

    This follows from the fact that by decomposing A'B' with just the proper amount of the other salt to form A'B", the remaining quantities B' and A" exist in exactly the ratio to form a neutral salt A" B'. It is possible, therefore, to ascribe to each acid and base a certain relative weight or "combining weight" by which they will combine one with the other to form neutral salts. The same reasoning may be extended to any number of acids and bases.

    It is true that Richter did not find out by himself this simplest statement of the law of neutrality which he discovered, but he expressed the same consequence in a rather clumsy way by a table of the combining weights of different bases related to the unit amount of a certain acid, and doing the same thing for the unit weight of every other acid. Then he observed that the numbers in these different tables are proportionate one to another. The same holds good if the corresponding series of the combining weights of acids for unit weights of different bases were tabulated. It was only a little later that a Berlin physicist, G.E.

    Fischer, united the whole system of Richter's numbers simply into a double table of acids and bases, taking as unit an arbitrarily chosen substance, namely sulphuric acid. The following table by Fischer is therefore the first table of combining weights.

    Bases. Acids.
    Alumina 525 | Fluoric 427
    Magnesia 615 | Carbonic 577
    Ammoniac 672 | Sebacic 706
    Lime 793 | Muriatic (hydrochloric) 712
    Soda 859 | Oxalic 755
    Strontiane 1329 | Phosphoric 979
    Potash 1605 | Formic 988
    Baryte 2222 | Sulphuric 1000
    | Succinic 1209
    | Nitric 1405
    | Acetic 1480
    | Citric 1683
    | Tartaric 1694

    It is interesting again to notice how difficult it is for the discoverer of a new truth to find out the most simple and complete statement of his discovery. It looks as if the amount of work needed to get to the top of a new idea is so great that not enough energy remains to clear the very last few steps. It is noteworthy also to observe how difficult it was for the chemists of that time to understand the bearing of Richter's work. Although a summary of his results was published in Berthollet's Essai de statique chimique, one of the most renowned chemical books of that time, nobody dared for a long time to take up the scientific treasure laid open for all the world.

    John Dalton's atomic theory.

    At the beginning of the 19th century the same question was taken up from quite another standpoint. John Dalton, in his investigations of the behaviour of gases, and in order to understand more easily what happened when gases were absorbed by liquids, used the corpuscular hypothesis already mentioned in connexion with Boyle.

    While he depicted to himself how the corpuscles, or, as he preferred to call them, the "atoms" of the gases, entered the interstices of the atoms of the liquids in which they dissolved, he asked himself: Are the several atoms of the same substance exactly alike, or are there differences as between the grains of sand? Now experience teaches us that it is impossible to separate, for example, a quantity of pure water into two samples of somewhat different properties.

    When a pure substance is fractionated by partial distillation or partial crystallization or partial change into another substance by chemical means, we find constantly that the residue is not changed in its properties, as it would be if the atoms were slightly different, since in that case e.g. the lighter atoms would distil first and leave behind the heavier ones, &c. Therefore we must conclude that all atoms of the same kind are exactly alike in shape and weight.

    But, if this be so, then all combinations between different atoms must proceed in certain invariable ratios of the weights of the elements, namely by the ratio of the weights of the atoms. Now it is impossible to weigh the atoms directly; but if we determine the ratio of the weights in which oxygen and hydrogen combine to form water, we determine in this way also the relative weight of their atoms.

    By a proper number of analyses of simple chemical compounds we may determine the ratios between the weights of all elementary atoms, and, selecting one of them as a standard or unit, we may express the weight of all other atoms in terms of this unit. The following table is Dalton's (Mem. of the Lit. and Phil. Soc. of Manchester (II.), vol. i. p. 287, 1805).

    Table of the Relative Weights of the Ultimate Particles of Gaseous
    and other Bodies.

    Hydrogen 1 | Nitrous oxide 13.7
    Azot 4.2 | Sulphur 14.4
    Carbone 4.3 | Nitric acid 15.2
    Ammonia 5.2 | Sulphuretted hydrogen 15.4
    Oxygen 5.5 | Carbonic acid 15.3
    Water 6.5 | Alcohol 15.1
    Phosphorus 7.2 | Sulphureous acid 19.9
    Phosphuretted hydrogen 8.2 | Sulphuric acid 25.4
    Nitrous gas 9.3 | Carburetted hydrogen from
    Ether 9.6 | stagnant water 6.3
    Gaseous oxide of carbone 9.8 | Olefiant gas 5.3

    Dalton at once drew a peculiar inference from this view. If two elements combine in different ratios, one must conclude that different numbers of atoms unite. There must be, therefore, a simple ratio between the quantities of the one element united to the same quantity of the other.

    Dalton showed at once that the analysis of carbon monoxide and of carbonic acid satisfied this consequence, the quantity of oxygen in the second compound being double the quantity in the first one. A similar relation holds good between marsh gas and olefiant gas (ethylene). This is the "law of multiple proportions" (see ATOM). By these considerations Dalton extended the law of combining weights, which Richter had demonstrated only for neutral salts, to all possible chemical compounds.

    While the scope of the law was enormously extended, its experimental foundation was even smaller than with Richter. Dalton did not concern himself very much with the experimental verification of his ideas, and the first communication of his theory in a paper on the absorption of gases by liquids (1803) attracted as little notice as Richter's discoveries. Even when T. Thomson published Dalton's views in an appendix to his widely read text-book of chemistry, matters did not change very much. It was only by the work of J.J. Berzelius that the enormous importance of Dalton's views was brought to light.

    Work of J.J. Berzelius.

    Berzelius was at that time busy in developing a trustworthy system of chemical analysis, and for this purpose he investigated the composition of the most important salts. He then went over the work of Richter, and realized that by his law he could check the results of his analyses. He tried it and found the law to hold good in most cases; when it did not, according to his analyses, he found that the error was on his own side and that better analyses fitted Richter's law.

    Thus he was prepared to understand the importance of Dalton's views and he proceeded at once to test its exactness. The result was the best possible. The law of the combining weights of the atoms, or of the atomic weights, proved to hold good in every case in which it was tested. All chemical combinations between the several elements are therefore regulated by weight according to certain numbers, one for each element, and combinations between the elements occur only in ratios given by these weights or by simple multiples thereof.

    Consequently Berzelius regarded Dalton's atomic hypothesis as proved by experiment, and became a strong believer in it.

    At the same time W.H. Wollaston had discovered independently the law of multiple proportions in the case of neutral and acid salts. He gave up further work when he learned of Dalton's ideas, but afterwards he pointed out that it was necessary to distinguish the hypothetical part in Dalton's views from their empirical part. The latter is the law of combining weights, or the law that chemical combination occurs only according to certain numbers characteristic for each element. Besides this purely experimental law there is the hypothetical explanation by the assumption of the existence of atoms.

    As it is not proved that this explanation is the only one possible, the existence of the law is not a proof of the existence of the atoms. He therefore preferred to call the characteristic combining numbers of the elements not "atomic weights" but "chemical equivalents."

    Although there were at all times chemists who shared Wollaston's cautious views, the atomic hypothesis found general acceptance because of its ready adaptability to the most diverse chemical facts. In our time it is even rather difficult to separate, as Wollaston did, the empirical part from the hypothetical one, and the concept of the atom penetrates the whole system of chemistry, especially organic chemistry.

    If we compare the work of Dalton with that of Richter we find a fundamental difference. Richter's inference as to the existence of combining weights in salts is based solely on an experimental observation, namely, the persistence of neutrality after double decomposition; Dalton's theory, on the contrary, is based on the hypothetical concept of the atom.

    Now, however favourably one may think of the probability of the existence of atoms, this existence is really not an observed fact, and it is necessary therefore to ask: Does there exist some general fact which may lead directly to the inference of the existence of combining weights of the elements, just as the persistence of neutrality leads to the same consequence as to acids and bases? The answer is in the affirmative, although it took a whole century before this question was put and answered. In a series of rather difficult papers (Zeits. f. Phys.

    Chem. since 1895, and Annalen der Naturphilosophie since 1902), Franz Wald (of Kladno, Bohemia) developed his investigations as to the genesis of this general law. Later, W.

    Ostwald (Faraday lecture, Trans. Chem. Soc., 1904) simplified Wald's reasoning and made it more evident.

    The general fact upon which the necessary existence of combining weights of the elements may be based is the shifting character of the boundary between elements and compounds. It has already been pointed out that Lavoisier considered the alkalis and the alkaline earths as elements, because in his time they had not been decomposed.

    As long as the decomposition had not been effected, these compounds could be considered and treated like elements without mistake, their combining weight being the sum of the combining weights of their (subsequently discovered) elements. This means that compounds enter in reaction with other substances as a whole, just as elements do. In particular, if a compound AB combines with another substance (elementary or compound) C to form a ternary compound ABC, it enters this latter as a whole, leaving behind no residue of A or B.

    Inversely, if a ternary compound ABC be changed into a binary one AB by taking away the element C, there will not be found any excess of A or B, but both elements will exhibit just the same ratio in the binary as in the ternary compound.

    Experimentally this important fact was proved first by Berzelius, who showed that by oxidizing lead sulphide, PbS, to lead sulphate, PbSO4, no excess either of sulphur or lead could be found after oxidation; the same held good with barium sulphite, BaSO3, when converted into barium sulphate, BaSO4. On a much larger scale and with very great accuracy the inverse was proved half a century later by J.S.

    Stas, who reduced silver chlorate, AgClO3, silver bromate, AgBrO3, and silver iodate, AgIO3, to the corresponding binary compounds, AgCl, AgBr and AgI, and searched in the residue of the reaction for any excess of silver or halogen. As the tests for these substances are among the most sensitive in analytical chemistry, the general law underwent a very severe test indeed. But the result was the same as was found by Berzelius--no excess of one of the elements could be discovered.

    We may infer, therefore, generally that compounds enter ulterior combinations without change of the ratio of their elements, or that the ratio between different elements in their compounds is the same in binary and ternary (or still more complicated) combinations.

    This law involves the existence of general combining weights just in the same way as the law of neutrality with double decomposition of salts involves the law of the combining weights of acids and bases. For if the ratio between A and B is determined, this same ratio must obtain in all ternary and more complicated compounds, containing the same elements.

    The same is true for any other elements, C, D, E, F, &c., as related to A. But by applying the general law to the ternary compound ABC the same conclusion may be drawn as to the ratio A : C in all compounds containing A and C, or B : C in the corresponding compounds. By reasoning further in the same way, we come to the conclusion that only such compounds are possible which contain elements according to certain ratio-numbers, i.e. their combining weight. Any other ratio would violate the law of the integral reaction of compounds.

    As to the law of multiple proportions, it may be deduced by a similar reasoning by considering the possible combinations between a compound, e.g. AB, and one of its elements, say B. AB and B can combine only according to their combining weights, and therefore the quantity of B combining with AB is equal to the quantity of AB which has combined with A to form AB. The new combination is therefore to be expressed by AB2.

    By extending this reasoning in the same way, we get the general conclusion that any compounds must be composed according to the formula A_m B_n C_p..., where m, n, p, &c., are integers.

    The bearing of these considerations on the atomic hypothesis is not to disprove it, but rather to show that the existence of the law of combining weights, which has been considered for so long as a proof of the truth of this hypothesis, does not necessarily involve such a consequence. Whether atoms may prove to exist or not, the law of combining weights is independent thereof.

    Atomic weight determinations.

    Two problems arose from the discoveries of Dalton and Berzelius. The first was to determine as exactly as possible the correct numbers of the combining weights. The other results from the fact that the same elements may combine in different ratios. Which of these ratios gives the true ratio of the atomic weights? And which is the multiple one?

    Both questions have had most ample experimental investigation, and are now answered rather satisfactorily. The first question was a purely technical one; its answer depended upon analytical skill, and Berzelius in his time easily took the lead, his numbers being readily accepted on the continent of Europe.

    In England there was a certain hesitation at first, owing to Prout's assumption (see below), but when Turner, at the instigation of the British Association for the Advancement of Science, tested Berzelius's numbers and found them entirely in accordance with his own measurements, these numbers were universally accepted. But then a rather large error in one of Berzelius's numbers (for carbon) was discovered in 1841 by Dumas and Stas, and a kind of panic ensued. New determinations of the atomic weights were undertaken from all sides.

    The result was most satisfactory for Berzelius, for no other important error was discovered, and even Dumas remarked that repeating a determination by Berzelius only meant getting the same result, if one worked properly.

    In later times more exact measurements, corresponding to the increasing art in analysis, were carried out by various workers, amongst whom J.S.

    Stas distinguished himself. But even the classical work of Stas proved not to be entirely without error; for every period has its limit in accuracy, which extends slowly as science extends. In recent times American chemists have been especially prominent in work of this kind, and the determinations of E.W. Morley, T.W. Richards and G.P. Baxter rank among the first in this line of investigation.

    During this work the question arose naturally: How far does the exactness of the law extend? It is well known that most natural laws are only approximations, owing to disturbing causes. Are there disturbing causes also with atomic weights? The answer is that as far as we know there are none. The law is still an exact one. But we must keep in mind that an absolute answer is never possible. Our exactness is in every case limited, and as long as the possible variations lie behind this limit, we cannot tell anything about them. In recent times H.

    Landolt has doubted and experimentally investigated the law of the conservation of weight.

    Landolt's experiments were carried out in vessels of the shape of an inverted U, each branch holding one of the substances to react one on the other. Two vessels were prepared as equal as possible and hung on both sides of a most sensitive balance. Then the difference of weight was determined in the usual way by exchanging both the vessels on the balance. After this set of weighings one of the vessels was inverted and the chemical reaction between the contained substances was performed; then the double weighing was repeated.

    Finally also the second vessel was inverted and a third set of weighings taken. From blank experiments where the vessels were filled with substances which did not react one on the other, the maximum error was determined to 0.03 milligramme.

    The reactions experimented with were: silver salts with ferrous sulphate; iron on copper sulphate; gold chloride and ferrous chloride; iodic acid and hydriodic acid; iodine and sodium sulphite; uranyl nitrate and potassium hydrate; chloral hydrate and potassium hydrate; electrolysis of cadmium iodide by an alternating current; solution of ammonium chloride, potassium bromide and uranyl nitrate in water, and precipitation of an aqueous solution of copper sulphate by alcohol.

    In most of these experiments a slight diminution of weight was observed which exceeded the limit of error distinctly in two cases, viz. silver nitrate with ferrous sulphate and iodic acid with hydriodic acid, the loss of weight amounting from 0.068 to 0.199 mg. with the first and 0.047 to 0.177 mg. with the second reaction on about 50 g. of substance.

    As each of these reactions had been tried in nine independent experiments, Landolt felt certain that there was no error of observation involved. But when the vessels were covered inside with paraffin wax, no appreciable diminution of weight was observed.

    These experiments apparently suggested a small decrease of weight as a consequence of chemical processes. On repeating them, however, and making allowance for the different amounts of water absorbed on the surface of the vessel at the beginning and end of the experiment, Landolt found in 1908 (Zeit. physik. Chem. 64, p. 581) that the variations in weight are equally positive and negative, and he concluded that there was no change in weight, at least to the extent of 1 part in 10,000,000.

    The periodic arrangement.

    There is still another question regarding the numerical values of the atomic weights, namely: Are there relations between the numbers belonging to the several elements? Richter had arranged his combining weights according to their magnitude, and endeavoured to prove that they form a certain mathematical series. He also explained the incompleteness of his series by assuming that certain acids or bases requisite to the filling up of the gaps in the series, were not yet known.

    He even had the satisfaction that in his time a new base was discovered, which fitted rather well into one of his gaps; but when it turned out afterwards that this new base was only calcium phosphate, this way of reasoning fell into discredit and was resumed only at a much later date.

    To obtain a correct table of atomic weights the second question already mentioned, viz. how to select the correct value in the case of multiple proportions, had to be answered. Berzelius was constantly on the look-out for means to distinguish the true atomic weights from their multiples or sub-multiples, but he could not find an unmistakable test.

    The whole question fell into a terrible disorder, until in the middle of the 19th century S. Cannizzaro showed that by taking together all partial evidences one could get a system of atomic weights consistent in itself and fitting the exigencies of chemical systematics. Then a startling discovery was made by the same method which Richter had tried in vain, by arranging all atomic weights in one series according to their numerical values.

    The Periodic Law.--The history of this discovery is rather long. As early as 1817 J.W. Dobereiner of Jena drew attention to the fact that the combining weight of strontium lies midway between those of calcium and barium, and some years later he showed that such "triads" occurred in other cases too. L. Gmelin tried to apply this idea to all elements, but he realized that in many cases more than three elements had to be grouped together.

    While Ernst Lenssen applied the idea of triads to the whole table of chemical elements, but without any important result, the other idea of grouping more than three elements into series according to their combining weights proved more successful. It was the concept of homologous series just developed in organic chemistry which influenced such considerations. First Max von Pettenkofer in 1850 and then J.B.A.

    Dumas in 1851 undertook to show that such a series of similar elements could be formed, having nearly constant differences between their combining weights. It is true that this idea in all its simplicity did not hold good extensively enough; so J.P. Cooke and Dumas tried more complicated types of numerical series, but only with a temporary success.

    The idea of arranging all elements in a single series in the order of the magnitude of their combining weights, the germ of which is to be found already in J.B. Richter's work, appears first in 1860 in some tables published by Lothar Meyer for his lectures. Independently, A.E.B. de Chancourtois in 1862, J.A.R. Newlands in 1863, and D.I. Mendeleeff in 1869, developed the same idea with the same result, namely, that it is possible to divide this series of all the elements into a certain number of very similar parts.

    In their papers, which appeared in the same year, 1869, Lothar Meyer and Mendeleeff gave to all these trials the shape now generally adopted. They succeeded in proving beyond all doubt that this series was of a periodic character, and could be cut into shorter pieces of similar construction. Here again gaps were present to be filled up by elements to be discovered, and Mendeleeff, who did this, predicted from the general regularity of his table the properties of such unknown elements.

    In this case fate was more kind than with Richter, and science had the satisfaction of seeing these predictions turn out to be true.

    The following table contains this periodic arrangement of the elements according to their atomic weight. By cutting the whole series into pieces of eight elements (or more in several cases) and arranging these one below another in the alternating way shown in the table, one finds similar elements placed in vertical series whose properties change gradually and with some regularity according to their place in the table. Not only the properties of the uncombined elements obey this rule, but also almost all properties of similar compounds of the elements.

    +--------+-----------+----------+----------+----------+----------+----------+----------+----------------------------+
    |He 4.0 |Li 7.03 |Be 9.1 |B 11.0 |C 12.00 |N 14.01 |O 16.00 |F 19.0 | .. .. .. |
    | Ne 20 | Na 23.00 | Mg 24.32| Al 27.1 | Si 28.4 | P 31.0 | S 32.06 | Cl 35.45| .. .. .. |
    |Ar 39.9 |K 39.15 |Ca 40.1 |Sc 44.1 |Ti 48.1 |V 51.2 |Cr 52.0 |Mn 55.0 |Fe 55.9, Ni 58.7, Co 59.0 |
    | .. | Cu 63.6 | In 65.4 | Ga 70 | Ge 72.5 | As 75.0 | Se 79.2 | Br 79.96| .. .. .. |
    |Kr 83.0 |Rb 85.5 |Sr 87.6 |Y 89.0 |Zr 90.6 |Cb(Nb) 94 |Mo 96.0 | .. |Ru 101.7, Rh 103.0, Pd 106.5|
    | .. | Ag 107.93| Cd 112.4| In 115 | Sn 119.0| Sb 120.2| Te 127.6| I 126.97| .. .. .. |
    |Xe 130.7|Cs 132.9 |Ba 137.4 |La 138.9 |Ce &c.

    140|Ta 181 |W 184 | .. |Os 191, Ir 193.0, Pt 194.8 |
    | .. | Au 197.2 | Hg 200.0| Tl 204.1| Pb 206.9| Bi 208.0| .. | .. | .. .. .. |
    | .. | .. |Ra 225 | .. |Th 232.5 | .. |U 238.5 | .. | .. .. .. |
    +--------+-----------+----------+----------+----------+----------+----------+----------+----------------------------+

    But upon closer investigation it must be confessed that these regularities can be called only rules, and not laws. In the first line one would expect that the steps in the values of the atomic weights should be regular, but it is not so. There are even cases when it is necessary to invert the order of the atomic weights to satisfy the chemical necessities. Thus argon has a larger number than potassium, but must precede it to fit into its proper place. The same is true of tellurium and iodine.

    It looks as if the real elements were scattered somewhat haphazard on a regular table, or as if some independent factor were active to disturb an existing regularity. It may be that the new facts mentioned above will lead also to an explanation of these irregularities; at present we must recognize them and not try to explain them away. Such considerations have to be kept in mind especially in regard to the very numerous attempts to express the series of combining weights in a mathematical form.

    In several cases rather surprising agreements were found, but never without exception. It looks as if some very important factor regulating the whole matter is still unknown, and before this has been elucidated no satisfactory treatment of the matter is possible. It seems therefore premature to enter into the details of these speculations.

    Transmutation of elements.

    In recent times not only our belief in the absolute exactness of the law of the conservation of weight has been shaken, but also our belief in the law of the conservation of the elements. The wonderful substance radium, whose existence has made us to revise quite a number of old and established views, seems to be a fulfilment of the old problem of the alchemists. It is true that by its help lead is not changed into gold, but radium not only changes itself into another element, helium (Ramsay), but seems also to cause other elements to change.

    Work in this line is of present day origin only and we do not know what new laws will be found to regulate these most unexpected reactions (see RADIOACTIVITY). But we realize once more that no law can be regarded as free from criticism and limitation; in the whole realm of exact sciences there is no such thing as the Absolute.

    Prout's assumption.

    Another question regarding the values of atomic weights was raised very soon after their first establishment. From the somewhat inexact first determinations William Prout concluded that all atomic weights are multiples of the atomic weight of hydrogen, thus suggesting all other elements to be probably made up from condensed hydrogen. Berzelius found his determinations not at all in accordance with this assumption, and strongly opposed the arbitrary rounding off of the numbers practised by the partisans of Prout's hypothesis.

    His hypothesis remained alive, although almost every chemist who did exact atomic weight determinations, especially Stas, contradicted it severely. Even in our time it seems to have followers, who hope that in some way the existing experimental differences may disappear.

    But one of the most important and best-known relations, that between hydrogen and oxygen, is certainly different from the simple ratio 1 : 16, for it has been determined by a large number of different investigators and by different methods to be undoubtedly lower, namely, 1 : 15.87.

    Therefore, if Prout's hypothesis contain an element of truth, by the act of condensation of some simpler substance into the present chemical elements a change of weight also must have occurred, such that the weight of the element did not remain exactly the weight of the simpler substance which changed into it. We have already remarked that such phenomena are not yet known with certainty, but they cannot be regarded as utterly impossible.

    International table of atomic weights.

    It may here be mentioned that the internationality of science has shown itself active also in the question of atomic weights. These numbers undergo incessantly small variations because of new work done for their determination. To avoid the uncertainty arising from this inevitable state of affairs, an international committee was formed by the co-operation of the leading chemical societies all over the world, and an international table of the most probable values is issued every year.

    The following table is that for 1910:--

    International Atomic Weights, 1910.

    Atomic | Atomic
    Weights. | Weights.
    Name. Symbol. O = 16. | Name. Symbol.

    O = 16.
    |
    Aluminium Al 27.1 | Mercury Hg 200.0
    Antimony Sb 120.2 | Molybdenum Mo 96.0
    Argon Ar 39.9 | Neodymium Nd 144.3
    Arsenic As 74.96 | Neon Ne 20.0
    Barium Ba 137.37 | Nickel Ni 58.68
    Beryllium Be \ 9.1 | Nitrogen N 14.01
    (Glucinum) Gl / | Osmium Os 190.9
    Bismuth Bi 208.0 | Oxygen O 16.00
    Boron B 11.0 | Palladium Pd 106.7
    Bromine Br 79.92 | Phosphorus P 31.0
    Cadmium Cd 112.40 | Platinum Pt 195.0
    Caesium Cs 132.81 | Potassium K 39.10
    Calcium Ca 40.09 | Praseodymium Pr 140.6
    Carbon C 12.00 | Radium Ra 226.4
    Cerium Ce 140.25 | Rhodium Rh 102.9
    Chlorine Cl 35.46 | Rubidium Rb 85.45
    Chromium Cr 52.0 | Ruthenium Ru 101.7
    Cobalt Co 58.97 | Samarium Sm 150.4
    Columbium Cb \ 93.5 | Scandium Sc 44.1
    (Niobium) (Nb) / | Selenium Se 79.2
    Copper Cu 63.57 | Silicon Si 28.3
    Dysprosium Dy 162.5 | Silver Ag 107.88
    Erbium Er 167.4 | Sodium Na 23.00
    Europium Eu 152.0 | Strontium Sr 87.62
    Fluorine F 19.0 | Sulphur S 32.07
    Gadolinium Gd 157.3 | Tantalum Ta 181.0
    Gallium Ga 69.9 | Tellurium Te 127.5
    Germanium Ge 72.5 | Terbium Th 159.2
    Gold Au 197.2 | Thallium Tl 204.0
    Helium He 4.0 | Thorium Th 232.42
    Hydrogen H 1.008 | Thulium Tm 168.5
    Indium In 114.8 | Tin Sn 119.0
    Iodine I 126.92 | Titanium Ti 48.1
    Iridium Ir 193.1 | Tungsten W 184.0
    Iron Fe 55.85 | Uranium U 238.5
    Krypton Kr 83.0 | Vanadium V 51.2
    Lanthanum La 139.0 | Xenon Xe 130.7
    Lead Pb 207.10 | Ytterbium
    Lithium Li 7.00 | (Neoytterbium) Yb 172.0
    Lutecium Lu 174.0 | Yttrium Y 89.0
    Magnesium Mg 24.32 | Zinc Zn 65.37
    Manganese Mn 54.93 | Zirconium Zr 90.6

    Concluding remarks.

    In the long and manifold development of the concept of the element one idea has remained prominent from the very beginning down to our times: it is the idea of a primordial matter. Since the naive statement of Thales that all things came from water, chemists could never reconcile themselves to the fact of the conservation of the elements.

    By an experimental investigation which extended over five centuries and more, the impossibility of transmuting one element into another--for example, lead into gold--was demonstrated in the most extended way, and nevertheless this law has so little entered the consciousness of the chemists that it is seldom explicitly stated even in carefully written text-books.

    On the other side the attempts to reduce the manifoldness of the actual chemical elements to one single primordial matter have never ceased, and the latest development of science seems to endorse such a view. It is therefore necessary to consider this question from a most general standpoint.

    In physical science, the chemical elements may be compared with such concepts as mass, momentum, quantity of electricity, entropy and such like. While mass and entropy are determined univocally by a unit and a number, quantity of electricity has a unit, a number and a sign, for it can be positive as well as negative. Momentum has a unit, a number and a direction in space. Elements do not have a common unit as the former magnitudes, but every element has its own unit, and there is no transition from one to another. All these magnitudes underlie a law of conservation, but to a very different degree.

    While mass was considered as absolutely invariable in the classical mechanics, the newer theories of the electrical constitution of matter make mass dependent on the velocity of the moving electron. Momentum also is not entirely conservative because it can be changed by light-pressure.

    Entropy is known as constantly increasing, remaining constant only in an ideal limiting case. With chemical elements we observe the same thing as with momentum; though till recently considered as conservative, there is now experimental evidence that they do not always show this character.

    Generally the laws of the conservation of mass, weight and elements are expressed as the "law of the conservation of matter." But this expression lacks scientific exactness because the term "matter" is generally not defined exactly, and because only the above-named properties of ponderable objects do not change, while all other properties do to a greater or less extent. Considered in the most general way, we may define matter as a complex of gravitational, kinetic and chemical energies, which are found to cling together in the same space.

    Of these energies the capacity factors, namely, weight, mass and elements, are conservative as described, while the intensity factors, potential, velocity and affinity, may change in wide limits. To explain why we find these energies constantly combined one with another, we only have to think of a mass without gravity or a ponderable body without mass. The first could not remain on earth because every movement would carry it into infinite space, and the second would acquire infinite velocity by the slightest push and would also disappear at once.

    Therefore only such objects which have both mass and weight can be handled and can be objects of our knowledge. In the same way all other energies come to our knowledge only by being (at least temporarily) associated with this combination of mass and weight. This is the true meaning of the term "matter."

    In this line of ideas matter appears not at all as a primary concept, but as a complex one; there is therefore no reason to consider matter as the last term of scientific analysis of chemical facts, and the idea of a primordial matter appears as a survival from the very first beginning of European natural philosophy. The most general concept science has developed to express the variety of experience is energy, and in terms of energy (combined with number, magnitudes, time and space) all observed and observable experiences are to be described. (W. O.)

    ELEMI, an oleo-resin (Manilla elemi) obtained in the Philippine Islands, probably from Canarium commune (nat. ord. Burseraceae), which when fresh and of good quality is a pale yellow granular substance, of honey-like consistency, but which gradually hardens with age. It is soluble in alcohol and ether, and has a spicy taste with a smell like fennel. In the 17th and 18th centuries the term elemi usually denoted an oleo-resin (American or Brazilian elemi) obtained from trees of the genus Icica in Brazil, and still earlier it meant oriental or African elemi, derived from Boswellia Frereana, which flourishes in the neighbourhood of Cape Gardafui.

    The word, like the older term animi, appears to have been derived from enhaemon (Gr. [Greek: enaimon]), the name of a styptic medicine said by Pliny to contain tears exuded by the olive tree of Arabia.

    ELEPHANT, the designation of the two existing representatives of the Proboscidea, a sub-order of ungulate mammals, and also extended to include their more immediate extinct relatives. As the distinctive characteristics of the sub-order, and also of the single existing genus Elephas, are given in the article PROBOSCIDEA, it will suffice to point out how the two existing species are distinguished from one another.

    The more specialized of the two species is the Indian or Asiatic elephant, Elephas maximus, specially characterized by the extreme complexity of the structure of its molar teeth, which are composed of a great number of tall and thin plates of enamel and dentine, with the intervals filled by cement (see PROBOSCIDEA, fig. 1). The average number of plates of the six successive molar teeth may be expressed by the "ridge-formula" 4, 8, 12, 12, 16, 24. The plates are compressed from before backwards, the anterior and posterior surfaces (as seen in the worn grinding face of the tooth) being nearly parallel. Ears of moderate size.

    Upper margin of the end of the proboscis developed into a distinct finger-like process, much longer than the lower margins, and the whole trunk uniformly tapering and smooth. Five nails on the fore-feet, and four (occasionally five) on the hind-feet.

    The Asiatic elephant inhabits the forest-lands of India, Burma, the Malay Peninsula, Cochin China, Ceylon and Sumatra. Elephants from the last-named islands present some variations from those of the mainland, and have been separated under the names of E. zeylonicus and E. sumatranus, but they are not more than local races, and the Ceylon animal, which is generally tuskless, may be the typical E. maximus, in which case the Indian race will be E. maximus indicus. The appearance of the Asiatic elephant is familiar to all.

    In the wild state it is gregarious, associating in herds of ten, twenty or more individuals, and, though it may under certain circumstances become dangerous, it is generally inoffensive and even timid, fond of shade and solitude and the neighbourhood of water. The height of the male at the shoulder when full grown is usually from 8 to 10 ft., occasionally as much as 11, and possibly even more. The female is somewhat smaller.

    [Illustration: FIG. 1. Asiatic Elephant (Elephas maximus).]

    The following epitome of the habits of the Asiatic elephants is extracted from Great and Small Game of India and Tibet, by R.

    Lydekker:--

    "The structure of the teeth is sufficient to indicate that the food consists chiefly of grass, leaves, succulent shoots and fruits; and this has been found by observation to be actually the case. In this respect the Asiatic species differs very widely from its African relative, whose nutriment is largely composed of boughs and roots. Another difference between the two animals is to be found in the great intolerance of the direct rays of the sun displayed by the Asiatic species, which never voluntarily exposes itself to their influence.

    Consequently, during the hot season in Upper India, and at all times except during the rains in the more southern districts, elephants keep much to the denser parts of the forests. In Southern India they delight in hill-forest, where the undergrowth is largely formed of bamboo, the tender shoots of which form a favourite delicacy; but during the rains they venture out to feed on the open grass tracts. Water is everywhere essential to their well-being; and no animals delight more thoroughly in a bath.

    Nor are they afraid to venture out of their depth, being excellent swimmers, and able, by means of their trunks, to breathe without difficulty when the entire body is submerged. The herds, which are led by females, appear in general to be family parties; and although commonly restricted to from thirty to fifty, may occasionally include as many as one hundred head.

    The old bulls are very generally solitary for a considerable portion of the year, but return to the herds during the pairing season. Some 'rogue' elephants--gunda of the natives--remain, however, permanently separated from the rest of their kind. All such solitary bulls, as their colloquial name indicates, are of a spiteful disposition; and it appears that with the majority the inducement to live apart is due to their partiality for cultivated crops, into which the more timid females are afraid to venture.

    'Must' elephants are males in a condition of--probably sexual--excitement, when an abundant discharge of dark oily matter exudes from two pores in the forehead. In addition to various sounds produced at other times, an elephant when about to charge gives vent to a shrill loud 'trumpet'; and on such occasions rushes on its adversary with its trunk safely rolled up out of danger, endeavouring either to pin him to the ground with its tusks (if a male tusker) or to trample him to death beneath its ponderous knees or feet."

    Exact information in regard to the period of gestation of the female is still lacking, the length of the period being given from eighteen to twenty-two months by different authorities. The native idea, which may be true, is that the shorter period occurs in the case of female and the longer in that of male calves. In India elephants seldom breed in captivity, though they do so more frequently in Burma and Siam; the domesticated stock is therefore replenished by fresh captures.

    Occasionally two calves are produced at a birth, although the normal number is one. Calves suckle with their mouths and not with their trunks. Unlike the African species, the Indian elephant charges with its trunk curled up, and consequently in silence.

    [Illustration: FIG. 2.--Immature African Elephant (Elephas africanus).]

    As regards their present distribution in India, elephants are found along the foot of the Himalaya as far west as the valley of Dehra-Dun, where the winter temperature falls to a comparatively low point. A favourite haunt used to be the swamp of Azufghur, lying among the sal-forests to the northward of Meerut.

    In the great tract of forest between the Ganges and Kistna rivers they occur locally as far west as Bilaspur and Mandla; they are met with in the Western Ghats as far north as between latitude 17 deg. and 18 deg., and are likewise found in the hill-forests of Mysore, as well as still farther south. In this part of the peninsula they ascend the hills to a considerable height, as they do in the Newara Eliya district of Ceylon, where they have been encountered at an elevation of over 7000 ft.

    There is evidence that about three centuries ago elephants wandered in the forests of Malwa and Nimar, while they survived to a later date in the Chanda district of the Central Provinces. At the comparatively remote epoch when the Deccan was a forest tract, they were probably also met with there, but the swamps of the Bengal Sundarbans appear unsuited to their habits.

    Of tusks, the three longest specimens on record respectively measure 8 ft. 9 in., 8 ft. 2 in. and 8 ft.; their respective weights being 81, 80 and 90 lb. These are, however, by no means the heaviest--one, whose length is 7 ft. 3-3/8 in., weighing 102 lb.; while a second, of which the length is 7 ft. 3-1/4 in., scaled 97-1/2 lb. Of the largest pair in the possession of the British Museum, which belonged to an elephant killed in 1866 by Colonel G.M. Payne in Madras, one tusk measures 6 ft. 8 in. in length, and weighs 77-3/4 lb., the other being somewhat smaller.

    It should be added that some of these large tusks came from Ceylon; such tuskers being believed to be descended from mainland animals imported into the island. "White" elephants are partial or complete albinos, and are far from uncommon in Burma and Siam. Young Indian elephants are hairy, thus showing affinity with the mammoth.

    The African elephant is a very different animal from its Asiatic cousin, both as regards structure and habits; and were it not for the existence of intermediate extinct species, might well be regarded as the representative of a distinct genus. Among its characteristics the following points are noticeable.

    The molar teeth are of coarse construction, with fewer and larger plates and thicker enamel; the ridge-formula being 3, 6, 7, 7, 8, 10; while the plates are not flattened, but thicker in the middle than at the edges, so that their worn grinding-surfaces are lozenge-shaped. Ears very large. The upper and lower margins of the end of the trunk form two nearly equal prehensile lips. Only three toes on the hind-foot. A very important distinction is to be found in the conformation of the trunk, which, as shown in fig.

    2, looks as though composed of a number of segments, gradually decreasing in size from base to tip like the joints of a telescope, instead of tapering gradually and evenly from one extremity to the other. The females have relatively large tusks, which are essential in obtaining their food. Except where exterminated by human agency (and this has been accomplished to a deplorable extent), the African elephant is a native of the wooded districts of the whole of Africa south of the Sahara.

    It is hunted chiefly for the sake of the ivory of its immense tusks, of which it yields the principal source of supply to the European market, and the desire to obtain which is rapidly leading to the extermination of the species. In size the male African elephant often surpasses the Asiatic species, reaching nearly 12 ft. in some cases. The circumference of the fore-foot is half the height at the shoulder, a circumstance which enables sportsmen to estimate approximately the size of their quarry. A tusk in the British Museum measures 10 ft.

    2 in. in length, with a basal girth of 24 in. and a weight of 226-1/2 lb.; but a still longer, although lighter, tusk was brought to London in 1905.

    Several local races of African elephant have been described, mainly distinguished from one another by the form and size of the ears, shape of the head, &c. The most interesting of these is the pigmy Congo race, E. africanus pumilio, named on the evidence of an immature specimen in the possession of C. Hagenbeck, the well-known animal-dealer of Hamburg, in 1905. According to Hagenbeck's estimate, this elephant, which came from the French Congo, was about six years old at the time it came under scientific notice.

    Moreover, in the opinion of the same observer, it is in no wise an abnormally dwarfed or ill-grown representative of the normal type of African elephant, but a well-developed adolescent animal.

    In height it stood about the same as a young individual of the ordinary African elephant when about a year and a half old, the vertical measurement at the shoulder being only 4 ft., or merely a foot higher than a new-born Indian elephant. Hagenbeck's estimate of its age was based on the presence of well-developed tusks, and the relative proportion of the fore and hind limbs, which are stated to show considerable differences in the case of the African elephant according to age.

    Nothing was stated as to the probability of an increase in the stature of the French Congo animal as it grows older; but even if we allow another foot, its height would be considerably less than half that of a large Central African bull of the ordinary elephant.

    By Dr Paul Matschie several races of the African elephant have been described, mainly, as already mentioned, on certain differences in the shape of the ear. From the two West African races (E. a. cyclotis and E. a. oxyotis) the dwarf Congo elephant is stated to be distinguished by the shape of its ear; comparison in at least one instance having been made with an immature animal. The relatively small size of the ear is one of the most distinctive characteristics of the dwarf race.

    Further, the skin is stated to be much less rough, with fewer cracks, while a more important difference occurs in the trunk, which lacks the transverse ridges so distinctive of the ordinary African elephant, and thereby approximates to the Asiatic species.

    If the differences in stature and form are constant, there can be no question as to the right of the dwarf Congo elephant to rank as a well-marked local race; the only point for consideration being whether it should not be called a species.

    Edition notice Project Gutenberg source, credits & licence

    The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.

    Title
    Encyclopaedia Britannica, 11th Edition, "Electrostatics" to "Engis"
    Author
    Various
    Release date
    February 4, 2011 [eBook #35169]
    Language
    English
    Credits
    Produced by Marius Masi, Don Kretz and the Online
    Most recently updated
    January 7, 2021
    Transcriber and production notes
    Produced by Marius Masi, Don Kretz and the Online
    Distributed Proofreading Team at https://www.pgdp.net
    
    Transcriber's notes:
    Front matter as received (title page, contents)
    (1) Numbers following letters (without space) like C2 were originally
          printed in subscript. Letter subscripts are preceded by an
          underscore, like C_n.
    
    (2) Characters following a carat (^) were printed in superscript.
    
    (3) Side-notes were relocated to function as titles of their respective
          paragraphs.
    
    (4) Macrons and breves above letters and dots below letters were not
          inserted.
    
    (5) [root] stands for the root symbol; [int] for integral; [alpha],
          [beta], etc. for greek letters.
    
    (6) The following typographical errors have been corrected:
    
        ARTICLE ELECTROTHERAPEUTICS: "This is the normal reaction of the
          nerve to faradism." 'normal' amended from 'mormal'.
    
        ARTICLE ELECTROTHERAPEUTICS: "If the current be suddenly reversed,
          so that what was the anode becomes the kathode, a stronger
          contraction is obtained than by simply making and breaking the
          current." 'stronger' amended from 'stonger'.
    
        ARTICLE ELECTROTHERAPEUTICS: "Thus RD is present in infantile
          paralysis, acute neuritis, &c., but absent in progressive muscular
          atrophy where the wasting of nerve and muscle takes place extremely
          slowly." 'progressive' amended from 'progessive'.
    
        ARTICLE ELECTROTHERAPEUTICS: "In the medical application of these
          facts it must be remembered that when an ion is introduced into the
          body by electrolysis, it is probably forced into the actual
          cellular constituents of the body ..." 'probably' amended from
          'propably'.
    
        ARTICLE ELGINSHIRE: "Findhorn has been twice visited by
          calamities." 'visited' amended from 'vsited'.
    
        ARTICLE ELIOT, GEORGE: "Romola, which is what is called an
          historical novel, owes its vitality not to the portraits of
          Savonarola or of the heroine ..." 'its' amended from 'it'.
    
        ARTICLE ELZEVIR: "... a chronological list and detailed description
          of all works printed by them, their various typographical marks
          ..." 'works' amended from 'words'.
    
        ARTICLE EMBALMING : "... it being held by the Egyptians a
          detestable thing to commit any violence or inflict a wound on the
          body." 'detestable' amended from 'destestable'.
    
        ARTICLE EMBRYOLOGY: "In this manner the germinal disc has become
          converted into the blastoderm ..." 'become' amended from' beecome'.
    
        ARTICLE EMBRYOLOGY: "For instance, in Vertebrata this tissue gives
          rise to nervous tissue, blood-vessels, renal tubules ..." 'rise'
          amended from 'tise'.
    
        ARTICLE EMIN PASHA: "This last step followed upon his receipt of a
          letter from Nubar Pasha, informing him that it was impossible for
          the Egyptian government to send him help ..." 'from' amended from
          'fom'.
    
        ARTICLE EMPIRE: "S. Riezler, Die literarischen Widersacher der
          Papste zur Zeit Ludwigs des Baiers (1874); ..." 'zur' amended from
          'sur'.
    
        ARTICLE EMPLOYERS' LIABILITY: "But it expressly applies to seamen."
          'expressly' amended from 'expressely'.
    
        ARTICLE EMPLOYERS' LIABILITY: "Compensation becomes payable after
          the expiration of sixty days from the date of the accident."
          'becomes' amended from 'bcomes'.
    
        ARTICLE ENCAUSTIC PAINTING: "In this ley he boiled the wax, cut
          into little bits, for half an hour, after which he removed it from
          the fire and allowed it to cool." 'little' amended from 'litle'.
    
        ARTICLE ENERGETICS: "... which throw much light on the phenomena of
          actual systems not far removed from these ideal limits." 'from'
          amended from 'trom'.
    
        ARTICLE ENERGETICS: "It should be noted, however, that this
          argument applies only to fluid phases, for in the case of
          deposition of a solid ..." 'phases' amended from 'phrases'.
    
        ARTICLE ENGEL, ERNST: "... and Zeitschrift des Statistischen
          Bureaus des Konigreichs Sachsen." 'Statistischen' amended from
          'Statistichen'.
    
    
    
    
              ENCYCLOPAEDIA BRITANNICA
    
      A DICTIONARY OF ARTS, SCIENCES, LITERATURE
               AND GENERAL INFORMATION
    
                  ELEVENTH EDITION
    
    
                VOLUME IX, SLICE III
    
              Electrostatics to Engis
    
    
    
    
    ARTICLES IN THIS SLICE:
    
    
      ELECTROSTATICS                    ELTVILLE
      ELECTROTHERAPEUTICS               ELTZ
      ELECTROTYPING                     ELVAS
      ELECTRUM, ELECTRON                ELVEY, SIR GEORGE JOB
      ELEGIT                            ELVIRA, SYNOD OF
      ELEGY                             EL WAD
      ELEMENT                           ELWOOD
      ELEMI                             ELY, RICHARD THEODORE
      ELEPHANT                          ELY
      ELEPHANTA ISLE                    ELYOT, SIR THOMAS
      ELEPHANTIASIS                     ELYRIA
      ELEPHANT'S-FOOT                   ELYSIUM
      ELETS                             ELZE, KARL
      ELEUSIS                           ELZEVIR
      ELEUTHERIUS                       EMANATION
      ELEUTHEROPOLIS                    EMANUEL I.
      ELEVATORS                         EMBALMING
      ELF                               EMBANKMENT
      ELGAR, SIR EDWARD                 EMBARGO
      ELGIN (Illinois, U.S.A.)          EMBASSY
      ELGIN (Scotland)                  EMBER DAYS and EMBER WEEKS
      ELGIN AND KINCARDINE, EARLS OF    EMBEZZLEMENT
      ELGINSHIRE                        EMBLEM
      ELGON                             EMBLEMENTS
      ELI                               EMBOSSING
      ELIAS                             EMBRACERY
      ELIAS, JOHN                       EMBRASURE
      ELIAS LEVITA                      EMBROIDERY
      ELIE                              EMBRUN
      ELIE DE BEAUMONT, JEAN BAPTISTE   EMBRYOLOGY
      ELIJAH                            EMDEN
      ELIJAH WILNA                      EMERALD
      ELIOT, CHARLES WILLIAM            EMERIC-DAVID, TOUSSAINT-BERNARD
      ELIOT, GEORGE                     EMERITUS
      ELIOT, SIR JOHN                   EMERSON, RALPH WALDO
      ELIOT, JOHN                       EMERSON, WILLIAM
      ELIS (district of Greece)         EMERY
      ELIS (city of Greece)             EMETICS
      ELIS, PHILOSOPHICAL SCHOOL OF     EMEU
      ELISAVETGRAD                      EMIGRATION
      ELISAVETPOL (Russian government)  EMILIA
      ELISAVETPOL (Russian town)        EMINENCE
      ELISHA                            EMINENT DOMAIN
      ELISHA BEN ABUYAH                 EMINESCU, MICHAIL
      ELIXIR                            EMIN PASHA
      ELIZABETH (queen of England)      EMLYN, THOMAS
      ELIZABETH [PETROVNA]              EMMANUEL
      ELIZABETH [AMELIE EUGENIE]        EMMANUEL PHILIBERT
      ELIZABETH (Frederick V. consort)  EMMAUS
      ELIZABETH [PAULINE OTTILIE]       EMMENDINGEN
      ELIZABETH (Charles I. daughter)   EMMERICH
      ELIZABETH (Marie Helene)          EMMET, ROBERT
      ELIZABETH, SAINT                  EMMET, THOMAS ADDIS
      ELIZABETH (New Jersey, U.S.A.)    EMMETT, DANIEL DECATUR
      ELIZABETHAN STYLE                 EMMITSBURG
      ELIZABETH CITY                    EMMIUS, UBBO
      ELK                               EMMONS, EBENEZER
      ELKHART                           EMMONS, NATHANAEL
      ELKINGTON, GEORGE RICHARDS        EMPEDOCLES
      ELLA                              EMPEROR
      ELLAND                            EMPHYSEMA
      ELLENBOROUGH, EDWARD LAW (judge)  EMPIRE
      ELLENBOROUGH, EDWARD LAW (Earl)   EMPIRICISM
      ELLERY, WILLIAM                   EMPLOYERS' LIABILITY & COMPENSATION
      ELLESMERE, FRANCIS EGERTON        EMPOLI
      ELLESMERE (town in England)       EMPORIA
      ELLICE (LAGOON) ISLANDS           EMPORIUM
      ELLICHPUR                         EMPSON, SIR RICHARD
      ELLIOTSON, JOHN                   EMPYEMA
      ELLIOTT, EBENEZER                 EMPYREAN
      ELLIPSE                           EMS (river of Germany)
      ELLIPSOID                         EMS (town of Germany)
      ELLIPTICITY                       EMSER, JEROME
      ELLIS, ALEXANDER JOHN             ENAMEL
      ELLIS, GEORGE                     ENCAENIA
      ELLIS, SIR HENRY                  ENCAUSTIC PAINTING
      ELLIS, ROBINSON                   ENCEINTE
      ELLIS, WILLIAM                    ENCINA, JUAN DEL
      ELLISTON, ROBERT WILLIAM          ENCKE, JOHANN FRANZ
      ELLORA                            ENCLAVE
      ELLORE                            ENCOIGNURE
      ELLSWORTH, OLIVER                 ENCYCLICAL
      ELLSWORTH                         ENCYCLOPAEDIA
      ELLWANGEN                         ENDECOTT, JOHN
      ELLWOOD, THOMAS                   ENDIVE
      ELM                               ENDOEUS
      ELMACIN, GEORGE                   ENDOGAMY
      ELMALI                            ENDOR
      ELMES, HARVEY LONSDALE            ENDOSPORA
      ELMES, JAMES                      ENDYMION
      ELMHAM, THOMAS                    ENERGETICS
      ELMINA                            ENERGICI
      ELMIRA                            ENERGY
      ELMSHORN                          ENFANTIN, BARTHELEMY PROSPER
      ELMSLEY, PETER                    ENFIDAVILLE
      ELNE                              ENFIELD (Connecticut, U.S.A.)
      EL OBEID                          ENFIELD (England)
      ELOI, SAINT                       ENFILADE
      ELONGATION                        ENGADINE
      EL PASO                           ENGAGED COLUMN
      ELPHINSTONE, MOUNTSTUART          ENGEL, ERNST
      ELPHINSTONE, WILLIAM              ENGEL, JOHANN JAKOB
      EL RENO                           ENGELBERG
      ELSFLETH                          ENGELBRECHTSDATTER, DORTHE
      ELSINORE                          ENGELHARDT, JOHANN GEORG VEIT
      ELSSLER, FANNY                    ENGHIEN, LOUIS ANTOINE HENRI
      ELSTER (rivers of Germany)        ENGHIEN
      ELSTER (spa of Germany)           ENGINE
    Header as received
    The Project Gutenberg eBook of Encyclopaedia Britannica, 11th Edition, "Electrostatics" to "Engis"
        
    This eBook is for the use of anyone anywhere in the United States and
    most other parts of the world at no cost and with almost no restrictions
    whatsoever. You may copy it, give it away or re-use it under the terms
    of the Project Gutenberg License included with this eBook or online
    at www.gutenberg.org. If you are not located in the United States,
    you will have to check the laws of the country where you are located
    before using this eBook.
    
    Title: Encyclopaedia Britannica, 11th Edition, "Electrostatics" to "Engis"
    
    Author: Various
    
    
            
    Release date: February 4, 2011 [eBook #35169]
                    Most recently updated: January 7, 2021
    
    Language: English
    
    Other information and formats: www.gutenberg.org/ebooks/35169
    
    Credits: Produced by Marius Masi, Don Kretz and the Online
            Distributed Proofreading Team at https://www.pgdp.net
    Full Project Gutenberg licence
        
    
    Updated editions will replace the previous one—the old editions will
    be renamed.
    
    Creating the works from print editions not protected by U.S. copyright
    law means that no one owns a United States copyright in these works,
    so the Foundation (and you!) can copy and distribute it in the United
    States without permission and without paying copyright
    royalties. Special rules, set forth in the General Terms of Use part
    of this license, apply to copying and distributing Project
    Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
    concept and trademark. Project Gutenberg is a registered trademark,
    and may not be used if you charge for an eBook, except by following
    the terms of the trademark license, including paying royalties for use
    of the Project Gutenberg trademark. If you do not charge anything for
    copies of this eBook, complying with the trademark license is very
    easy. You may use this eBook for nearly any purpose such as creation
    of derivative works, reports, performances and research. Project
    Gutenberg eBooks may be modified and printed and given away—you may
    do practically ANYTHING in the United States with eBooks not protected
    by U.S. copyright law. Redistribution is subject to the trademark
    license, especially commercial redistribution.
    
    
    START: FULL LICENSE
    
    THE FULL PROJECT GUTENBERG™ LICENSE
    
    PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
    
    To protect the Project Gutenberg™ mission of promoting the free
    distribution of electronic works, by using or distributing this work
    (or any other work associated in any way with the phrase “Project
    Gutenberg”), you agree to comply with all the terms of the Full
    Project Gutenberg License available with this file or online at
    www.gutenberg.org/license.
    
    Section 1. General Terms of Use and Redistributing Project Gutenberg
    electronic works
    
    1.A. By reading or using any part of this Project Gutenberg
    electronic work, you indicate that you have read, understand, agree to
    and accept all the terms of this license and intellectual property
    (trademark/copyright) agreement. If you do not agree to abide by all
    the terms of this agreement, you must cease using and return or
    destroy all copies of Project Gutenberg electronic works in your
    possession. If you paid a fee for obtaining a copy of or access to a
    Project Gutenberg electronic work and you do not agree to be bound
    by the terms of this agreement, you may obtain a refund from the person
    or entity to whom you paid the fee as set forth in paragraph 1.E.8.
    
    1.B. “Project Gutenberg” is a registered trademark. It may only be
    used on or associated in any way with an electronic work by people who
    agree to be bound by the terms of this agreement. There are a few
    things that you can do with most Project Gutenberg electronic works
    even without complying with the full terms of this agreement. See
    paragraph 1.C below. There are a lot of things you can do with Project
    Gutenberg electronic works if you follow the terms of this
    agreement and help preserve free future access to Project Gutenberg
    electronic works. See paragraph 1.E below.
    
    1.C. The Project Gutenberg Literary Archive Foundation (“the
    Foundation” or PGLAF), owns a compilation copyright in the collection
    of Project Gutenberg electronic works. Nearly all the individual
    works in the collection are in the public domain in the United
    States. If an individual work is unprotected by copyright law in the
    United States and you are located in the United States, we do not
    claim a right to prevent you from copying, distributing, performing,
    displaying or creating derivative works based on the work as long as
    all references to Project Gutenberg are removed. Of course, we hope
    that you will support the Project Gutenberg mission of promoting
    free access to electronic works by freely sharing Project Gutenberg
    works in compliance with the terms of this agreement for keeping the
    Project Gutenberg name associated with the work. You can easily
    comply with the terms of this agreement by keeping this work in the
    same format with its attached full Project Gutenberg License when
    you share it without charge with others.
    
    1.D. The copyright laws of the place where you are located also govern
    what you can do with this work. Copyright laws in most countries are
    in a constant state of change. If you are outside the United States,
    check the laws of your country in addition to the terms of this
    agreement before downloading, copying, displaying, performing,
    distributing or creating derivative works based on this work or any
    other Project Gutenberg work. The Foundation makes no
    representations concerning the copyright status of any work in any
    country other than the United States.
    
    1.E. Unless you have removed all references to Project Gutenberg:
    
    1.E.1. The following sentence, with active links to, or other
    immediate access to, the full Project Gutenberg License must appear
    prominently whenever any copy of a Project Gutenberg work (any work
    on which the phrase “Project Gutenberg” appears, or with which the
    phrase “Project Gutenberg” is associated) is accessed, displayed,
    performed, viewed, copied or distributed:
    
        This eBook is for the use of anyone anywhere in the United States and most
        other parts of the world at no cost and with almost no restrictions
        whatsoever. You may copy it, give it away or re-use it under the terms
        of the Project Gutenberg™ License included with this eBook or online
        at www.gutenberg.org. If you
        are not located in the United States, you will have to check the laws
        of the country where you are located before using this eBook.
      
    1.E.2. If an individual Project Gutenberg electronic work is
    derived from texts not protected by U.S. copyright law (does not
    contain a notice indicating that it is posted with permission of the
    copyright holder), the work can be copied and distributed to anyone in
    the United States without paying any fees or charges. If you are
    redistributing or providing access to a work with the phrase “Project
    Gutenberg” associated with or appearing on the work, you must comply
    either with the requirements of paragraphs 1.E.1 through 1.E.7 or
    obtain permission for the use of the work and the Project Gutenberg
    trademark as set forth in paragraphs 1.E.8 or 1.E.9.
    
    1.E.3. If an individual Project Gutenberg electronic work is posted
    with the permission of the copyright holder, your use and distribution
    must comply with both paragraphs 1.E.1 through 1.E.7 and any
    additional terms imposed by the copyright holder. Additional terms
    will be linked to the Project Gutenberg License for all works
    posted with the permission of the copyright holder found at the
    beginning of this work.
    
    1.E.4. Do not unlink or detach or remove the full Project Gutenberg
    License terms from this work, or any files containing a part of this
    work or any other work associated with Project Gutenberg.
    
    1.E.5. Do not copy, display, perform, distribute or redistribute this
    electronic work, or any part of this electronic work, without
    prominently displaying the sentence set forth in paragraph 1.E.1 with
    active links or immediate access to the full terms of the Project
    Gutenberg License.
    
    1.E.6. You may convert to and distribute this work in any binary,
    compressed, marked up, nonproprietary or proprietary form, including
    any word processing or hypertext form. However, if you provide access
    to or distribute copies of a Project Gutenberg work in a format
    other than “Plain Vanilla ASCII” or other format used in the official
    version posted on the official Project Gutenberg website
    (www.gutenberg.org), you must, at no additional cost, fee or expense
    to the user, provide a copy, a means of exporting a copy, or a means
    of obtaining a copy upon request, of the work in its original “Plain
    Vanilla ASCII” or other form. Any alternate format must include the
    full Project Gutenberg License as specified in paragraph 1.E.1.
    
    1.E.7. Do not charge a fee for access to, viewing, displaying,
    performing, copying or distributing any Project Gutenberg works
    unless you comply with paragraph 1.E.8 or 1.E.9.
    
    1.E.8. You may charge a reasonable fee for copies of or providing
    access to or distributing Project Gutenberg electronic works
    provided that:
    
        • You pay a royalty fee of 20% of the gross profits you derive from
            the use of Project Gutenberg works calculated using the method
            you already use to calculate your applicable taxes. The fee is owed
            to the owner of the Project Gutenberg trademark, but he has
            agreed to donate royalties under this paragraph to the Project
            Gutenberg Literary Archive Foundation. Royalty payments must be paid
            within 60 days following each date on which you prepare (or are
            legally required to prepare) your periodic tax returns. Royalty
            payments should be clearly marked as such and sent to the Project
            Gutenberg Literary Archive Foundation at the address specified in
            Section 4, “Information about donations to the Project Gutenberg
            Literary Archive Foundation.”
        
        • You provide a full refund of any money paid by a user who notifies
            you in writing (or by e-mail) within 30 days of receipt that s/he
            does not agree to the terms of the full Project Gutenberg™
            License. You must require such a user to return or destroy all
            copies of the works possessed in a physical medium and discontinue
            all use of and all access to other copies of Project Gutenberg™
            works.
        
        • You provide, in accordance with paragraph 1.F.3, a full refund of
            any money paid for a work or a replacement copy, if a defect in the
            electronic work is discovered and reported to you within 90 days of
            receipt of the work.
        
        • You comply with all other terms of this agreement for free
            distribution of Project Gutenberg™ works.
        
    
    1.E.9. If you wish to charge a fee or distribute a Project
    Gutenberg™ electronic work or group of works on different terms than
    are set forth in this agreement, you must obtain permission in writing
    from the Project Gutenberg Literary Archive Foundation, the manager of
    the Project Gutenberg™ trademark. Contact the Foundation as set
    forth in Section 3 below.
    
    1.F.
    
    1.F.1. Project Gutenberg volunteers and employees expend considerable
    effort to identify, do copyright research on, transcribe and proofread
    works not protected by U.S. copyright law in creating the Project
    Gutenberg™ collection. Despite these efforts, Project Gutenberg™
    electronic works, and the medium on which they may be stored, may
    contain “Defects,” such as, but not limited to, incomplete, inaccurate
    or corrupt data, transcription errors, a copyright or other
    intellectual property infringement, a defective or damaged disk or
    other medium, a computer virus, or computer codes that damage or
    cannot be read by your equipment.
    
    1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
    of Replacement or Refund” described in paragraph 1.F.3, the Project
    Gutenberg Literary Archive Foundation, the owner of the Project
    Gutenberg™ trademark, and any other party distributing a Project
    Gutenberg™ electronic work under this agreement, disclaim all
    liability to you for damages, costs and expenses, including legal
    fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
    LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
    PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
    TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
    LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
    INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
    DAMAGE.
    
    1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
    defect in this electronic work within 90 days of receiving it, you can
    receive a refund of the money (if any) you paid for it by sending a
    written explanation to the person you received the work from. If you
    received the work on a physical medium, you must return the medium
    with your written explanation. The person or entity that provided you
    with the defective work may elect to provide a replacement copy in
    lieu of a refund. If you received the work electronically, the person
    or entity providing it to you may choose to give you a second
    opportunity to receive the work electronically in lieu of a refund. If
    the second copy is also defective, you may demand a refund in writing
    without further opportunities to fix the problem.
    
    1.F.4. Except for the limited right of replacement or refund set forth
    in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
    OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
    LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
    
    1.F.5. Some states do not allow disclaimers of certain implied
    warranties or the exclusion or limitation of certain types of
    damages. If any disclaimer or limitation set forth in this agreement
    violates the law of the state applicable to this agreement, the
    agreement shall be interpreted to make the maximum disclaimer or
    limitation permitted by the applicable state law. The invalidity or
    unenforceability of any provision of this agreement shall not void the
    remaining provisions.
    
    1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
    trademark owner, any agent or employee of the Foundation, anyone
    providing copies of Project Gutenberg™ electronic works in
    accordance with this agreement, and any volunteers associated with the
    production, promotion and distribution of Project Gutenberg™
    electronic works, harmless from all liability, costs and expenses,
    including legal fees, that arise directly or indirectly from any of
    the following which you do or cause to occur: (a) distribution of this
    or any Project Gutenberg work, (b) alteration, modification, or
    additions or deletions to any Project Gutenberg work, and (c) any
    Defect you cause.
    
    Section 2. Information about the Mission of Project Gutenberg
    
    Project Gutenberg is synonymous with the free distribution of
    electronic works in formats readable by the widest variety of
    computers including obsolete, old, middle-aged and new computers. It
    exists because of the efforts of hundreds of volunteers and donations
    from people in all walks of life.
    
    Volunteers and financial support to provide volunteers with the
    assistance they need are critical to reaching Project Gutenberg’s
    goals and ensuring that the Project Gutenberg collection will
    remain freely available for generations to come. In 2001, the Project
    Gutenberg Literary Archive Foundation was created to provide a secure
    and permanent future for Project Gutenberg and future
    generations. To learn more about the Project Gutenberg Literary
    Archive Foundation and how your efforts and donations can help, see
    Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
    
    Section 3. Information about the Project Gutenberg Literary Archive Foundation
    
    The Project Gutenberg Literary Archive Foundation is a non-profit
    501(c)(3) educational corporation organized under the laws of the
    state of Mississippi and granted tax exempt status by the Internal
    Revenue Service. The Foundation’s EIN or federal tax identification
    number is 64-6221541. Contributions to the Project Gutenberg Literary
    Archive Foundation are tax deductible to the full extent permitted by
    U.S. federal laws and your state’s laws.
    
    The Foundation’s business office is located at 41 Watchung Plaza #516,
    Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
    to date contact information can be found at the Foundation’s website
    and official page at www.gutenberg.org/contact
    
    Section 4. Information about Donations to the Project Gutenberg
    Literary Archive Foundation
    
    Project Gutenberg™ depends upon and cannot survive without widespread
    public support and donations to carry out its mission of
    increasing the number of public domain and licensed works that can be
    freely distributed in machine-readable form accessible by the widest
    array of equipment including outdated equipment. Many small donations
    ($1 to $5,000) are particularly important to maintaining tax exempt
    status with the IRS.
    
    The Foundation is committed to complying with the laws regulating
    charities and charitable donations in all 50 states of the United
    States. Compliance requirements are not uniform and it takes a
    considerable effort, much paperwork and many fees to meet and keep up
    with these requirements. We do not solicit donations in locations
    where we have not received written confirmation of compliance. To SEND
    DONATIONS or determine the status of compliance for any particular state
    visit www.gutenberg.org/donate.
    
    While we cannot and do not solicit contributions from states where we
    have not met the solicitation requirements, we know of no prohibition
    against accepting unsolicited donations from donors in such states who
    approach us with offers to donate.
    
    International donations are gratefully accepted, but we cannot make
    any statements concerning tax treatment of donations received from
    outside the United States. U.S. laws alone swamp our small staff.
    
    Please check the Project Gutenberg web pages for current donation
    methods and addresses. Donations are accepted in a number of other
    ways including checks, online payments and credit card donations. To
    donate, please visit: www.gutenberg.org/donate.
    
    Section 5. General Information About Project Gutenberg electronic works
    
    Professor Michael S. Hart was the originator of the Project
    Gutenberg concept of a library of electronic works that could be
    freely shared with anyone. For forty years, he produced and
    distributed Project Gutenberg eBooks with only a loose network of
    volunteer support.
    
    Project Gutenberg eBooks are often created from several printed
    editions, all of which are confirmed as not protected by copyright in
    the U.S. unless a copyright notice is included. Thus, we do not
    necessarily keep eBooks in compliance with any particular paper
    edition.
    
    Most people start at our website which has the main PG search
    facility: www.gutenberg.org.
    
    This website includes information about Project Gutenberg,
    including how to make donations to the Project Gutenberg Literary
    Archive Foundation, how to help produce our new eBooks, and how to
    subscribe to our email newsletter to hear about new eBooks.

    Source: Project Gutenberg ebook #35169. Public-domain status is recorded per item; the licence text above is reproduced unchanged.

    Source
    Project Gutenberg
    Record
    ebook 35169
    Rights
    public domain (US)
    Rendered
    2026-11-21
    Completeness
    First 200,000 characters rendered.