Gutenberg · e01.org
Cover of Encyclopaedia Britannica, 11th Edition, "Capefigue" to "Carneades"
Project Gutenberg cover, or a typographic cover where none is held.

Gutenberg · ebook 33127

Encyclopaedia Britannica, 11th Edition, "Capefigue" to "Carneades"

by Various · English · public domain in the US

  • Language English
  • PG edition 2010
  • Rights public domain (US)
  • Source Project Gutenberg
0%

Contents

    CARBONATES

    CAPEFIGUE, JEAN-BAPTISTE HONORE RAYMOND (1801-1872), French historian and biographer, was born at Marseilles in 1801. At the age of twenty he went to Paris to study law; but he soon deserted law for journalism. He became editor of the Quotidienne, and was afterwards connected, either as editor or leading contributor, with the Temps, the Messager des Chambres, the Revolution de 1848 and other papers. During the ascendancy of the Bourbons he held a post in the foreign office, to which is due the royalism of some of his newspaper articles.

    Indeed all Capefigue's works receive their colour from his legitimist politics; he preaches divine right and non-resistance, and finds polite words even for the profligacy of Louis XV. and the worthlessness of his mistresses.

    He wrote biographies of Catherine and Marie de' Medici, Anne and Maria Theresa of Austria, Catherine II. of Russia, Elizabeth of England, Diana of Poitiers and Agnes Sorel--for he delighted in passing from "queens of the right hand" to "queens of the left." His historical works, besides histories of the Jews from the fall of the Maccabees to the author's time, of the first four centuries of the Christian church, and of European diplomatists, extend over the whole range of French history. He died at Paris in December 1872.

    The general catalogue of printed books for the Bibliotheque Nationale
    contains no fewer than seventy-seven works (145 volumes) published by
    Capefigue during forty years. Of these only the Histoire de
    Philippe-Auguste
    (4 vols., 1829) and the Histoire de la reforme, de
    la ligue et du regne de Henri IV
    (8 vols., 1834-1835) perhaps deserve
    still to be remembered. For Capefigue's style bears evident marks of
    haste, and although he had access to an exceptionally large number of
    sources of information, including the state papers, neither his
    accuracy nor his judgment was to be trusted.

    CAPEL (OF HADHAM), ARTHUR CAPEL, BARON (fl. 1640-1649), English royalist, son of Sir Henry Capel of Rayne Hall, Essex, and of Theodosia, daughter of Sir Edward Montagu of Broughton, Northamptonshire, was elected a member of the Short and Long Parliaments in 1640 for Hertfordshire. He at first supported the opposition to Charles's arbitrary government, but soon allied himself with the king's cause, on which side his sympathies were engaged, and was raised to the peerage by the title of Baron Capel of Hadham on the 6th of August 1641.

    On the outbreak of the war he was appointed lieutenant-general of Shropshire, Cheshire and North Wales, where he rendered useful military services, and later was made one of the prince of Wales's councillors, and a commissioner at the negotiations at Uxbridge in 1645. He attended the queen in her flight to France in 1646, but disapproved of the prince's journey thither, and retired to Jersey, subsequently aiding in the king's escape to the Isle of Wight.

    He was one of the chief leaders in the second Civil War, but met with no success, and on the 27th of August, together with Lord Norwich, he surrendered to Fairfax at Colchester on promise of quarter for life.[1] This assurance, however, was afterwards interpreted as not binding the civil authorities, and his fate for some time hung in the balance.

    He succeeded in escaping from the Tower, but was again captured, was condemned to death by the new "high court of justice" on the 8th of March 1649, and was beheaded together with the duke of Hamilton and Lord Holland the next day. He married Elizabeth, daughter and heir of Sir Charles Morrison of Cassiobury, Hertfordshire, through whom that estate passed into his family, and by whom besides four daughters he had five sons, the eldest Arthur being created earl of Essex at the Restoration.

    Lord Capel, who was much beloved, and who was a man of deep religious feeling and exemplary life, wrote Daily Observations or Meditations: Divine, Morall, published with some of his letters in 1654, and reprinted, with a short life of the author, under the title Excellent Contemplations, in 1683.

    FOOTNOTE:

    [1] Gardiner's Hist. of the Civil War, iv. 206; cf. article on
    Fairfax by C.H. Frith in the Dict. of Nat. Biog.

    CAPEL CURIG, a tourist resort in Carnarvonshire, North Wales, 14-1/2 m. from Bangor. It is a collection of a few houses, too scattered to form a village properly so called. At the Roberts hotel is shown on a window pane the supposed signature of Wellington. The road from Bettws y coed, past the Swallow Falls to Capel Curig, and thence to Llanberis and Carnarvon, is very interesting, grand and lonely. Excellent fishing is to be had here, chiefly for trout.

    In summer, coaching tours discharge numbers of visitors daily; the railway station is Bettws (London & North-Western railway). Capel Curig means "chapel of Curig," a British saint mentioned in Welsh poetry. The place is a centre for artists, geologists and botanists, for the ascent of Snowdon, Moel Siabod, Glydyr Fawr, Glydyr Fach, Tryfan, &c., and for visiting Llyn Ogwen, Llyn Idwal, Twll du (Devil's Kitchen), Nant Ffrancon and the Penrhyn quarries.

    CAPELL, EDWARD (1713-1781), English Shakespearian critic, was born at Troston Hall in Suffolk on the 11th of June 1713. Through the influence of the duke of Grafton he was appointed to the office of deputy-inspector of plays in 1737, with a salary of L200 per annum, and in 1745 he was made groom of the privy chamber through the same influence. In 1760 appeared his Prolusions, or Select Pieces of Ancient Poetry, a collection which included Edward III., placed by Capell among the doubtful plays of Shakespeare.

    Shocked at the inaccuracies which had crept into Sir Thomas Hanmer's edition of Shakespeare, he projected an entirely new edition, to be carefully collated with the original copies. After spending three years in collecting, and comparing scarce folio and quarto editions, he published his own edition in 10 vols. 8vo (1768), with an introduction written in a style of extraordinary quaintness, which was afterwards appended to Johnson's and Steevens's editions.

    Capell published the first part of his commentary, which included notes on nine plays with a glossary, in 1774. This he afterwards recalled, and the publication of the complete work, Notes and Various Readings of Shakespeare (1779-1783), the third volume of which bears the title of The School of Shakespeare, was completed, under the superintendence of John Collins, in 1783, two years after the author's death.

    It contains the results of his unremitting labour for thirty years, and throws considerable light on the history of the times of Shakespeare, as well as on the sources from which he derived his plots. Collins asserted that Steevens had stolen Capell's notes for his own edition, the story being that the printers had been bribed to show Steevens the sheets of Capell's edition while it was passing through the press.

    Besides the works already specified, he published an edition of Antony and Cleopatra, adapted for the stage with the help of David Garrick in 1758. His edition of Shakespeare passed through many editions (1768, 1771, 1793, 1799, 1803, 1813). Capell died in the Temple on the 24th of February 1781.

    CAPELLA, MARTIANUS MINNEUS FELIX, Latin writer, according to Cassiodorus a native of Madaura in Africa, flourished during the 5th century, certainly before the year 439. He appears to have practised as a lawyer at Carthage and to have been in easy circumstances. His curious encyclopaedic work, entitled Satyricon, or De Nuptiis Philologiae et Mercurii et de septem Artibus liberalibus libri novem, is an elaborate allegory in nine books, written in a mixture of prose and verse, after the manner of the Menippean satires of Varro.

    The style is heavy and involved, loaded with metaphor and bizarre expressions, and verbose to excess. The first two books contain the allegory proper--the marriage of Mercury to a nymph named Philologia. The remaining seven books contain expositions of the seven liberal arts, which then comprehended all human knowledge. Book iii. treats of grammar, iv. of dialectics, v. of rhetoric, vi. of geometry, vii. of arithmetic, viii. of astronomy, ix. of music.

    These abstract discussions are linked on to the original allegory by the device of personifying each science as a courtier of Mercury and Philologia. The work was a complete encyclopaedia of the liberal culture of the time, and was in high repute during the middle ages. The author's chief sources were Varro, Pliny, Solinus, Aquila Romanus, and Aristides Quintilianus. His prose resembles that of Apuleius (also a native of Madaura), but is even more difficult.

    The verse portions, which are on the whole correct and classically constructed, are in imitation of Varro and are less tiresome.

    A passage in book viii. contains a very clear statement of the heliocentric system of astronomy. It has been supposed that Copernicus, who quotes Capella, may have received from this work some hints towards his own new system.

    Editio princeps, by F. Vitalis Bodianus, 1499; the best modern edition
    is that of F. Eyssenhardt (1866); for the relation of Martianus
    Capella to Aristides Quintilianus see H. Deiters, Studien zu den
    griechischen Musikern
    (1881). In the 11th century the German monk
    Notker Labeo translated the first two books into Old High German.

    CAPE MAY, a city and watering-place of Cape May county, New Jersey, U.S.A., on the Atlantic coast, 2 m. E.N.E. of Cape May, the S. extremity of the state, and about 80 m. S. by E. of Philadelphia. Pop. (1890) 2136; (1900) 2257; (1905) 3006; (1910) 2471. Cape May is served by the Maryland, Delaware & Virginia (by ferry to Lewes, Delaware), the West Jersey & Seashore (Pennsylvania system), and the Atlantic City (Reading system) railways, and, during the summer season, by steamboat to Philadelphia.

    The principal part of the city is on a peninsula (formerly Cape Island) between the ocean and Cold Spring inlet, which has been dredged and is protected by jetties to make a suitable harbour. The further improvement of the inlet and the harbour was authorized by Congress in 1907. On the ocean side, along a hard sand beach 5 m. long, is the Esplanade. There are numerous hotels and handsome cottages for summer visitors, who come especially from Philadelphia, from New York, from the South and from the West.

    Cape May offers good bathing, yachting and fishing, with driving and hunting in the wooded country inland from the coast. At Cape May Point is the Cape May lighthouse, 145 ft. high, built in 1800 and rebuilt in 1859. In the city are canneries of vegetables and fruit, glass-works and a gold-beating establishment. Fish and oysters are exported.

    Cape May was named by Cornelis Jacobsen Mey, director of the Prince Hendrick (Delaware) river for the West India Company of Holland, who took possession of the river in 1623, and planted the short-lived colony of Fort Nassau 4 m. below Philadelphia, near the present Gloucester City, N.J. Cape May was settled about 1699,--a previous attempt to settle here made by Samuel Blommaert in 1631 was unsuccessful. It was an important whaling port early in the 18th century, and became prominent as a watering-place late in that century.

    It was incorporated as the borough of Cape Island in 1848, and chartered as the city of Cape Island in 1851; in 1869 the name was changed to Cape May.

    CAPENA, an ancient city of southern Etruria, frequently mentioned with Veii and Falerii. Its exact site is, however, uncertain. According to Cato it was a colony of the former, and in the wars between Veii and Rome it appears as dependent upon Veii, after the fall of which town, however, it became subject to Rome. Out of its territory the tribus Stellatina was formed in 367 B.C. In later republican times the city itself is hardly mentioned, but under the empire a municipium Capenatium foederatum is frequently mentioned in inscriptions.

    Of these several were found upon the hill known as Civitucola, about 4 m. north-east of the post station of ad Vicesimum on the ancient Via Flaminia, a site which is well adapted for an ancient city. It lies on the north side of a dried-up lake, once no doubt a volcanic crater.

    Remains of buildings of the Roman period also exist there, while, in the sides of the hill of S. Martino which lies on the north-east,[1] rock-cut tombs belonging to the 7th and 6th centuries B.C. but used in Roman times for fresh burials, were excavated in 1859-1864, and again in

    1. Inscriptions in early Latin and in local dialect were also found

    (W. Henzen, Bullettino dell' Istituto, 1864, 143; R. Paribeni, Notizie degli Scavi, 1905, 301). Similar tombs have also been found on the hills south of Civitucola. G.B. de Rossi, however, supposed that the games of which records (fragments of the fasti ludorum) were also discovered at Civitucola, were those which were celebrated from time immemorial at the Lucus Feroniae, with which he therefore proposed to identify this site, placing Capena itself at S. Oreste, on the south-eastern side of Mount Soracte.

    But there are difficulties in the way of this assumption, and it is more probable that the Lucus Feroniae is to be sought at or near Nazzano, where, in the excavation of a circular building which some conjecture to have been the actual temple of Feronia, inscriptions relating to a municipality were found. Others, however, propose to place Lucus Feroniae at the church of S. Abbondio, 1 m. east of Rignano and 4 m. north-north-west of Civitucola, which is built out of ancient materials.

    On the Via Flaminia, 26 m. from Rome, near Rignano, is the Christian cemetery of Theodora.

    See R. Lanciani, Bullettino dell' Istituto, 1870, 32; G.B. de Rossi,
    Annali dell' Istituto, 1883, 254; Bullettino Cristiano, 1883, 115;
    G. Dennis, Cities and Cemeteries of Etruria (London, 1883), i. 131;
    E. Bormann, Corpus Inscriptionum Latinarum (Berlin, 1888), xi. 571;
    H. Nissen, Italische Landeskunde (Berlin, 1902), ii. 369; R.
    Paribeni, in Monumenti dei Lincei, xvi. (1906), 277 seq. (T. As.)

    FOOTNOTE:

    [1] Some writers wrongly speak as though the two hills were identical.

    CAPER, FLAVIUS, Latin grammarian, flourished during the and century. He devoted special attention to the early Latin writers, and is highly spoken of by Priscian. Caper was the author of two works--De Lingua Latina and De Dubiis Generibus. These works in their original form are lost; but two short treatises entitled De Orthographia and De Verbis Dubiis have come down to us under his name, probably excerpts from the original works, with later additions by an unknown writer.

    See F. Osann, De Flavio Capro (1849), and review by W. Christ in
    Philologus, xviii. 165-170 (1862), where several editions of other
    important grammarians are noticed; G. Keil, "De Flavio Grammatico," in
    Dissertationes Halenses, x. (1889); text in H. Keil's Grammatici
    Latini
    , vii.

    CAPERCALLY, or CAPERKALLY,[1] a bird's name commonly derived from the Gaelic capull, a horse (or, more properly, a mare), and coille, a wood, but with greater likelihood, according to the opinion of Dr M'Lauchlan, from cabher, an old man (and, by metaphor, an old bird), and coille, the name of Tetrao urogallus, the largest of the grouse family (Tetraonidae), and a species which was formerly indigenous to Scotland and Ireland.

    The word is frequently spelt otherwise, as capercalze, capercailzie (the z, a letter unknown in Gaelic, being pronounced like y), and capercaillie, and the English name of wood-grouse or cock-of-the-wood has been often applied to the same bird.

    The earliest notice of it as an inhabitant of North Britain seems to be by Hector Boethius, whose works were published in 1526, and it can then be traced through various Scottish writers, to whom, however, it was evidently but little known, for about 200 years, or may be more, and by one of them only, Bishop Lesley, in 1578, was a definite habitat assigned to it:--"In Rossia quoque Louguhabria [Lochaber], atque aliis montanis locis" (De Origine Moribus et rebus gestis Scotorum. Romae: ed. 1675, p. 24).

    Pennant, during one of his tours in Scotland, found that it was then (1769) still to be met with in Glen Moriston and in The Chisholm's country, whence he saw a cock-bird. We may infer that it became extinct about that time, since Robert Gray (Birds of the West of Scotland, p. 229) quotes the Rev. John Grant as writing in 1794: "The last seen in Scotland was in the woods of Strathglass about thirty-two years ago." Of its existence in Ireland we have scarcely more details.

    If we may credit the Pavones sylvestres of Giraldus Cambrensis with being of this species, it was once abundant there, and Willughby (1678) was told that it was known in that kingdom as the "cock-of-the-wood." A few other writers mention it by the same name, and John Rutty, in 1772, says (Nat. Hist. Dublin, i.p.

    302) that "one was seen in the county of Leitrim about the year 1710, but they have entirely disappeared of late, by reason of the destruction of our woods." Pennant also states that about 1760 a few were to be found about Thomastown in Tipperary, but no later evidence is forthcoming, and thus it would seem that the species was exterminated at nearly the same period in both Ireland and Scotland.

    When the practice of planting was introduced, the restoration of this fine bird to both countries was attempted. In Ireland the trial, of which some particulars are given by J. Vaughan Thompson (Birds of Ireland, ii. 32), was made at Glengariff, but it seems to have utterly failed, whereas in Scotland, where it was begun at Taymouth, it finally succeeded, and the species is now not only firmly established, but is increasing in numbers and range. Mr L.

    Lloyd, the author of several excellent works on the wild sports and natural history of Scandinavia, supplied the stock from Sweden, but it must be always borne in mind that the original British race was wholly extinct, and no remains of it are known to exist in any museum.

    This species is widely, though intermittently, distributed on the continent of Europe, from Lapland to the northern parts of Spain, Italy and Greece, but is always restricted to pine-forests, which alone afford it food in winter. Its bones have been found in the kitchen-middens of Denmark, proving that country to have once been clothed with woods of that kind. Its remains have also been recognized from the caves of Aquitaine. Its eastern or southern limits in Asia cannot be precisely given, but it certainly inhabits the forests of a great part of Siberia.

    On the Stannovoi Mountains, however, it is replaced by a distinct though nearly allied species, the T. urogalloides of Dr von Middendorff,[2] which is smaller with a slenderer bill but longer tail.

    The cock-of-the-wood is remarkable for his large size and dark plumage, with the breast metallic green. He is polygamous, and in spring mounts to the topmost bough of a tall tree, whence he challenges all comers by extraordinary sounds and gestures; while the hens, which are much smaller and mottled in colour, timidly abide below the result of the frequent duels, patiently submitting themselves to the victor.

    While this is going on it is the practice in many countries, though generally in defiance of the law, for the so-called sportsman stealthily to draw nigh, and with well-aimed gun to murder the principal performer in the scene. The hen makes an artless nest on the ground, and lays therein from seven to nine or even more eggs.

    The young are able to fly soon after they are hatched, and towards the end of summer and beginning of autumn, from feeding on the fruit and leaves of the bilberries and other similar plants, which form the undercovert of the forests, get into excellent condition and become good eating. With the first heavy falls of snow they betake themselves to the trees, and then, feeding on the pine-leaves, their flesh speedily acquires so strong a flavour of turpentine as to be distasteful to most palates.

    The usual method of pursuing this species on the continent of Europe is by encouraging a trained dog to range the forest and spring the birds, which then perch on the trees; while he is baying at the foot their attention is so much attracted by him that they permit the near approach of his master, who thus obtains a more or less easy shot. A considerable number, however, are also snared.

    Hybrids are very frequently produced between the capercally and the black grouse (T. tetrix), and the offspring has been described by some authors under the name of T. medius, as though a distinct species. (A. N.)

    FOOTNOTES:

    [1] This is the spelling of the old law-books, as given by Pennant,
    the zoologist, who, on something more than mere report, first
    included this bird among the British fauna. The only one of the
    "Scots Acts," however, in which the present writer has been able to
    ascertain that the bird is named is No. 30 of James VI. (1621), which
    was passed to protect "powties, partrikes, moore foulles, blakcoks,
    gray hennis, termigantis, quailzies, capercailzies," &c.

    [2] Not to be confounded with the bird so named previously by Prof.
    Nilsson, which is a hybrid.

    CAPERN, EDWARD (1819-1894), English poet, was born at Tiverton, Devonshire, on the 21st of January 1819. From an early age he worked in a lace factory, but owing to failing eyesight he had to abandon this occupation in 1847 and he was in dire distress until he secured an appointment to be "the Rural Postman of Bideford," by which name he is usually known. He occupied his leisure in writing occasional poetry which struck the popular fancy.

    Collected in a volume and published by subscription in 1856, it received the warm praise of the reviews and many distinguished people. Poems, by Edward Capern, was followed by Ballads and Songs (1858), The Devonshire Melodist (a collection of the author's songs, some of them to his own music) and Wayside Warbles (1865), and resulted in a civil list pension being granted him by Lord Palmerston. He died on the 5th of June 1894.

    CAPERNAUM ([Greek: Kapernaoum]; probably, "the village of Nahum"), an ancient city of Galilee. More than any other place, it was the home of Jesus after he began his mission; there he preached, called several of his disciples, and did many works, but without meeting with much response from the inhabitants, over whom he pronounced the heavy denunciation:--"And thou, Capernaum, which art exalted unto heaven, shalt be brought down to hell." The site of the city has been a matter of much dispute,--one party, headed by Dr E.

    Robinson, maintaining an identification with Khan Minyeh at the north-west corner of the Sea of Galilee, and another, represented especially by Sir C.W. Wilson, supporting the claims of Tell Hum, midway between Khan Minyeh and the mouth of the Jordan. Khan Minyeh is beautifully situated in a "fertile plain formed by the retreat of the mountains about the middle of the western shore" of the Sea of Galilee. Its ruins are not very extensive, though they may have been despoiled for building the great Saracenic Khan from which they take their name.

    In the neighbourhood is a water-source, Ain et-Tabighah, an Arabic corruption of Heptapegon or Seven Springs (referred to by Josephus as being near Capernaum). Tell Hum lies about 3 m. north of Khan Minyeh, and its ruins, covering an area of "half a mile long by a quarter wide," prove it to have been the site of no small town. It must be admitted that if it be not Capernaum it is impossible to say what ancient place it represents.

    But it is doubtful whether Tell Hum can be considered as a corruption of Kefr Nahum, the Semitic name which the Greek represents: and there is not here, as at Khan Minyeh, any spring that can be equated to the Heptapegon of Josephus. On the whole the probabilities of the two sites seem to balance, and it is practically impossible without further discoveries to decide between them.

    The sites of the neighbouring cities of Bethsaida and Chorazin are probably to be sought respectively at El-Bateiha, a grassy plain in the north-east corner of the lake, and at Kerazeh, 2 m. north of Tell Hum. According to the so-called Pseudo-Methodius there was a tradition that Antichrist would be born at Chorazin, educated at Bethsaida and rule at Capernaum--hence the curse of Jesus upon these cities.

    On the site of Capernaum see especially W. Sanday in Journal of
    Theological Studies
    , vol. v. p. 42. (R. A. S. M.)

    CAPERS, the unexpanded flower-buds of Capparis spinosa, prepared with vinegar for use as a pickle. The caper plant is a trailing shrub, belonging to the Mediterranean region, resembling in habit the common bramble, and having handsome flowers of a pinkish white, with four petals, and numerous long tassel-like stamens. The leaves are simple and ovate, with spiny stipules. The plant is cultivated in Sicily and the south of France; and in commerce capers are valued according to the period at which the buds are gathered and preserved.

    The finest are the young tender buds called "nonpareil," after which, gradually increasing in size and lessening in value, come "superfine," "fine," "capucin" and "capot." Other species of Capparis are similarly employed in various localities, and in some cases the fruit is pickled.

    CAPET, the name of a family to which, for nearly nine centuries, the kings of France, and many of the rulers of the most powerful fiefs in that country, belonged, and which mingled with several of the other royal races of Europe. The original significance of the name remains in dispute, but the first of the family to whom it was applied was Hugh, who was elected king of the Franks in 987.

    The real founder of the house, however, was Robert the Strong (q.v.), who received from Charles the Bald, king of the Franks, the countships of Anjou and Blois, and who is sometimes called duke, as he exercised some military authority in the district between the Seine and the Loire. According to Aimoin of Saint-Germain-des-Pres, and the chronicler, Richer, he was a Saxon, but historians question this statement.

    Robert's two sons, Odo or Eudes, and Robert II., succeeded their father successively as dukes, and, in 887, some of the Franks chose Odo as their king. A similar step was taken, in 922, in the case of Robert II., this too marking the increasing irritation felt at the weakness of the Carolingian kings.

    When Robert died in 923, he was succeeded by his brother-in-law, Rudolph, duke of Burgundy, and not by his son Hugh, who is known in history as Hugh the Great, duke of France and Burgundy, and whose domain extended from the Loire to the frontiers of Picardy. When Louis V., king of the Franks, died in 987, the Franks, setting aside the Carolingians, passed over his brother Charles, and elected Hugh Capet, son of Hugh the Great, as their king, and crowned him at Reims.

    Avoiding the pretensions which had been made by the Carolingian kings, the Capetian kings were content, for a time, with a more modest position, and the story of the growth of their power belongs to the history of France. They had to combat the feudal nobility, and later, the younger branches of the royal house established in the great duchies, and the main reason for the permanence of their power was, perhaps, the fact that there were few minorities among them.

    The direct line ruled in France from 987 to 1328, when, at the death of King Charles IV., it was succeeded by the younger, or Valois, branch of the family. Philip VI., the first of the Valois kings, was a son of Charles I., count of Valois and grandson of King Philip III. (see VALOIS). The Capetian-Valois dynasty lasted until 1498, when Louis, duke of Orleans, became king as Louis XII., on the death of King Charles VIII. (see ORLEANS). Louis XII. dying childless, the house of Valois-Angouleme followed from Francis I. to the death of Henry III. in 1589 (see ANGOULEME), when the last great Capetian family, the Bourbons (q.v.) mounted the throne.

    Scarcely second to the royal house is the branch to which belonged the dukes of Burgundy. In the 10th century the duchy of Burgundy fell into the hands of Hugh the Great, father of Hugh Capet, on whose death in 956 it passed to his son Otto, and, in 965, to his son Henry. In 1032 Robert, the second son of Robert the Pious, king of the Franks, and grandson of Hugh Capet, founded the first ducal house, which ruled until

    1. For two years the duchy was in the hands of the crown, but in

    1363, the second ducal house, also Capetian, was founded by Philip the Bold, son of John II., king of France. This branch of the Capetians is also distinguished by its union with the Habsburgs, through the marriage of Mary, daughter of Charles the Bold, duke of Burgundy, with Maximilian, afterwards the emperor Maximilian I. Of great importance also was the house of the counts of Anjou, which was founded in 1246, by Charles, son of the French king Louis VIII., and which, in 1360, was raised to the dignity of a dukedom (see ANJOU).

    Members of this family sat upon the thrones of two kingdoms. The counts and dukes of Anjou were kings of Naples from 1265 to 1442. In 1308 Charles Robert of Anjou was elected king of Hungary, his claim being based on the marriage of his grandfather Charles II., king of Naples and count of Anjou, with Maria, daughter of Stephen V., king of Hungary. A third branch formed the house of the counts of Artois, which was founded in 1238 by Robert, son of King Louis VIII.

    This house merged in that of Valois in 1383, by the marriage of Margaret, daughter of Louis, count of Artois, with Philip the Bold, duke of Burgundy. The throne of Navarre was also filled by the Capetians. In 1284 Jeanne, daughter and heiress of Henry I., king of Navarre, married Philip IV., king of France, and the two kingdoms were united until Philip of Valois became king of France as Philip VI. in 1328, when Jeanne, daughter of King Louis X., and heiress of Navarre, married Philip, count of Evreux (see NAVARRE).

    In the 13th century the throne of Constantinople was occupied by a branch of the Capetians. Peter, grandson of King Louis VI., obtained that dignity in 1217 as brother-in-law of the two previous emperors, Baldwin, count of Flanders, and his brother Henry. Peter was succeeded successively by his two sons, Robert and Baldwin, from whom in 1261 the empire was recovered by the Greeks.

    The counts of Dreux, for two centuries and a half (1132-1377), and the counts of Evreux, from 1307 to 1425, also belonged to the family of the Capets,--other members of which worthy of mention are the Dunois and the Longuevilles, illegitimate branches of the house of Valois, which produced many famous warriors and courtiers.

    CAPE TOWN, the capital of the Cape Province, South Africa, in 33 deg. 56' S., 18 deg. 28' E. It is at the north-west extremity of the Cape Peninsula on the south shore of Table Bay, is 6181 m. by sea from London and 957 by rail south-west of Johannesburg. Few cities are more magnificently situated. Behind the bay the massive wall of Table Mountain, 2 m. in length, rises to a height of over 3500 ft., while on the east and west projecting mountains enclose the plain in which the city lies.

    The mountain to the east, 3300 ft. high, which projects but slightly seawards, is the Devil's Peak, that to the west the Lion's Head (over 2000 ft. high), with a lesser height in front called the Lion's Rump or Signal Hill. The city, at first confined to the land at the head of the bay, has extended all round the shores of the bay and to the lower spurs of Table Mountain.

    The purely Dutch aspect which Cape Town preserved until the middle of the 19th century has disappeared. Nearly all the stucco-fronted brick houses, with flat roofs and cornices and wide spreading stoeps, of the early Dutch settlers have been replaced by shops, warehouses and offices in styles common to English towns. Of the many fine public buildings which adorn the city scarcely any date before 1860. The mixture of races among the inhabitants, especially the presence of numerous Malays, who on all festive occasions appear in gorgeous raiment, gives additional animation and colour to the street scenes.

    The mosques with their cupolas and minarets, and houses built in Eastern fashion contrast curiously with the Renaissance style of most of the modern buildings, the medieval aspect of the castle and the quaint appearance of the Dutch houses still standing.

    Chief Public Buildings.--The castle stands near the shore at the head of the bay. Begun in 1666 its usefulness as a fortress has long ceased, but it serves to link the city to its past. West of the castle is a large oblong space, the Parade Ground. A little farther west, at the foot of the central jetty is a statue of Van Riebeek, the first governor of the Cape. In a line with the jetty is Adderley Street, and its continuation Government Avenue. Adderley Street and the avenue make one straight road a mile long, and at its end are "the Gardens," as the suburbs built on the rising ground leading to Table Mountain are called.

    The avenue itself is fully half a mile long and is lined on either side with fine oak trees. In Adderley Street are the customs house and railway station, the Standard bank, the general post and telegraph offices, with a tower 120 ft. high, and the Dutch Reformed church. The church dates from 1699 and is the oldest church in South Africa. Of the original building only the clock tower (sent from Holland in 1727) remains.

    Government Avenue contains, on the east side, the Houses of Parliament, government house, a modernized Dutch building, and the Jewish synagogue; on the west side are the Anglican cathedral and grammar schools, the public library, botanic gardens, the museum and South African college. Many of these buildings are of considerable architectural merit, the material chiefly used in their construction being granite from the Paarl and red brick.

    The botanic gardens cover 14 acres, contain over 8000 varieties of trees and plants, and afford a magnificent view of Table Mountain and its companion heights. In the gardens, in front of the library is a statue of Sir George Grey, governor of the Cape from 1854 to 1861. The most valuable portion of the library is the 5000 volumes presented by Sir George Grey. In Queen Victoria Street, which runs along the west side of the gardens, are the Cape University buildings (begun in 1906), the law courts, City club and Huguenot memorial hall.

    The Anglican cathedral, begun in 1901 to replace an unpretentious building on the same site, is dedicated to St George.

    It lies between the library and St George's Street, in which are the chief newspaper offices, and premises of the wholesale merchants. West of St George's Street is Greenmarket Square, the centre of the town during the Dutch period. From the balcony of the town house, which overlooks the square, proclamations were read to the burghers, summoned to the spot by the ringing of the bell in the small-domed tower. Still farther west, in Riebeek Square, is the old slave market, now used as a church and school for coloured people.

    Facing the north side of the Parade Ground are the handsome municipal buildings, completed in 1906. The most conspicuous feature is the clock tower and belfry, 200 ft. high. The hall is 130 ft. by 62, and 55 ft. high. Opposite the main entrance is a statue of Edward VII. by William Goscombe John, unveiled in 1905. The opera house occupies the north-west corner of the Parade Ground. Plein Street, which leads south from the Parade Ground, is noted for its cheap shops, largely patronized on Saturday nights by the coloured inhabitants. In Sir Lowry Road, the chief eastern thoroughfare, is the large vegetable and fruit market.

    Immediately west of the harbour are the convict station and Somerset hospital. They are built at the town end of Greenpoint Common, the open space at the foot of Signal Hill. Cape Town is provided with an excellent water supply and an efficient drainage system.

    The Suburbs.--The suburbs of Cape Town, for natural beauty of position, are among the finest in the world. On the west they extend about 3 m., by Green Point to Sea Point, between the sea and the foot of the Lion's Rump; on the east they run round the foot of the Devil's Peak, by Woodstock, Mowbray, Rondebosch, Newlands, Claremont, &c., to Wynberg, a distance of 7 m. Though these are managed by various municipalities, there is practically no break in the buildings for the whole distance.

    All the parts are connected by the suburban railway service, and by an electric tramway system. A tramway also runs from the town over the Kloof, or pass between Table Mountain and the Lion's Head, to Camp's Bay, on the west coast south of Sea Point, to which place it is continued, the tramway thus completely circling the Lion's Head and Signal Hill. Of the suburbs mentioned, Green Point and Sea Point are seaside resorts, Woodstock being both a business and residential quarter.

    Woodstock covers the ground on which the British, in 1806, defeated the Dutch, and contains the house in which the articles of capitulation were signed. Another seaside suburb is Milnerton on the north-east shores of Table Bay at the mouth of the Diep river. Near Maitland, and 3 m. from the city, is the Cape Town observatory, built in 1820 and maintained by the British government. Rondebosch, 5 m. from the city, contains some of the finest of the Dutch mansions in South Africa.

    Less than a mile from the station is Groote Schuur, a typical specimen of the country houses built by the Dutch settlers in the 17th century. The house was the property of Cecil Rhodes, and was bequeathed by him for the use of the prime minister of Federated South Africa. The grounds of the estate extend up the slopes of Table Mountain. At Newlands is Bishop's Court, the home of the archbishop of Cape Town.

    More distant suburbs to the south-east are Constantia, with a famous Dutch farm-house and wine farm, and Muizenberg and Kalk Bay, the two last villages on the shore of False Bay. At Muizenberg Cecil Rhodes died, 1902. Facing the Atlantic is Hout's Bay, 10 m. south-south-west of Wynberg.

    Most of the suburbs and the city itself are exposed to the south-east winds which, passing over the flats which join the Cape Peninsula to the mainland, reach the city sand-laden. From its bracing qualities this wind, which blows in the summer, is known as the "Cape Doctor." During its prevalence Table Mountain is covered by a dense whitish-grey cloud, overlapping its side like a tablecloth.

    The Harbour.--Table Bay, 20 m. wide at its entrance, is fully exposed to north and north-west gales. The harbour works, begun in 1860, afford sheltered accommodation for a large number of vessels. From the west end of the bay a breakwater extends north-east for some 4000 ft. East of the breakwater and parallel to it for 2700 ft. is the South pier. From breakwater and pier arms project laterally. In the area enclosed are the Victoria basin, covering 64 acres, the Alfred basin of 8-1/2 acres, a graving dock 529 ft. long and a patent slip for vessels up to 1500 tons.

    There is good anchorage outside the Victoria basin under the lee of the breakwater, and since 1904 the foreshore east of the south pier has been reclaimed and additional wharfage provided. Altogether there are 2-1/2 m. of quay walls, the wharfs being provided with electrical cranage. Cargo can be transferred direct from the ship into railway trucks. Vessels of the deepest draught can enter into the Victoria basin, the depth of water at low tide ranging from 24 to 36 ft.

    Trade and Communication.--The port has a practical monopoly of the passenger traffic between the Cape and England. Several lines of steamers--chiefly British and German--maintain regular communication with Europe, the British mail boats taking sixteen days on the journey.

    By its railway connexions Cape Town affords the quickest means of reaching, from western Europe, every other town in South Africa. In the import trade Cape Town is closely rivalled by Port Elizabeth, but its export trade, which includes diamonds and bar gold, is fully 70% of that of the entire colony. In 1898, the year before the beginning of the Anglo-Boer war, the volume of trade was:--Imports L5,128,292, exports L15,881,952. In 1904, two years after the conclusion of the war the figures were:--imports L9,070,757; exports L17,471,760.

    In 1907 during a period of severe and prolonged trade depression the imports had fallen to L5,263,930, but the exports owing entirely to the increased output of gold from the Rand mines had increased to L37,994,658; gold and diamonds represented over L37,000,000 of this total. The tonnage of ships entering the harbour in 1887 was 801,033. In 1904 it had risen to 4,846,012 and in 1907 was 4,671,146. The trade of the port in tons was 1,276,350 in 1899 and 1,413,471 in 1904. In 1907 it had fallen to 658,721.

    Defence.--Cape Town, being in the event of the closing of the Suez Canal on the main route of ships from Europe to the East, is of considerable strategic importance. It is defended by several batteries armed with modern heavy guns. It is garrisoned by Imperial and local troops, and is connected by railway with the naval station at Simon's Town on the east of the Cape Peninsula.

    Population.--The Cape electoral division, which includes Cape Town, had in 1865 a population of 50,064, in 1875 57,319, in 1891 97,238, and in 1904 213,167, of whom 120,475 were whites. Cape Town itself had a population in 1875 of 33,000, in 1891 of 51,251 and in 1904 of 77,668.

    Inclusive of the nearer suburbs the population was 78,866 in 1891 and 170,083 in 1904. Of the inhabitants of the city proper 44,203 were white (1904). Of the coloured inhabitants 6561 were Malays; the remainder being chiefly of mixed blood. The most populous suburbs in 1904 were Woodstock with 28,990 inhabitants, and Wynberg with 18,477.

    History and Local Government.--Cape Town was founded in 1652 by settlers sent from Holland by the Netherlands East India Co., under Jan van Riebeek. It came definitely into the possession of Great Britain in

    1. Its political history is indistinguishable from that of Cape

    Colony (q.v.). The town was granted municipal institutions in 1836. (Among the councillors returned at the election of 1904 was Dr Abdurrahman, a Mahommedan and a graduate of Edinburgh, this being, it is believed, the first instance of the election of a man of colour to any European representative body in South Africa.) The municipality owns the water and lighting services. The municipal rating value was, in 1880 L2,054,204, in 1901 L9,475,260, in 1908 (when the rate levied was 3d. in the L) L14,129,439. The total rateable value of the suburbs, not included in the above figures, is over L8,000,000. Rates are based on capital, not annual, value.

    The control of the port is vested in the Harbour and Railway Board of the Union.

    Cape Town is the seat of the legislature of the Union of South Africa, of the provincial government, of the provincial division of the Supreme Court of South Africa, and of the Cape University; also of an archbishop of the Anglican and a bishop of the Roman Catholic churches.

    CAPE VERDE ISLANDS (Ilhas do Caba Verde), an archipelago belonging to Portugal; off the West African coast, between 17 deg. 13' and 14 deg. 47' N. and 22 deg. 40' and 25 deg. 22' W. Pop. (1905) about 138,620; area, 1475 sq. m. The archipelago consists of ten islands:--Santo Antao (commonly miswritten St Antonio), Sao Vicente, Santa Luzia, Sao Nicolao, Sal, Boa Vista, Maio, Sao Thiago (the St Jago of the English), Fogo, and Brava, besides four uninhabited islets. It forms a sort of broken crescent, with the concavity towards the west.

    The last four islands constitute the leeward (Sotavento) group and the other six the windward (Barlavento). The distance between the coast of Africa and the nearest island (Boa Vista) is about 300 m. The islands derive their name, frequently but erroneously written "Cape Verd," or "Cape de Verd" Islands, from the African promontory off which they lie, known as Cape Verde, or the Green Cape. The entire archipelago is of volcanic origin, and on the island of Fogo there is an active volcano.

    No serious eruption has taken place since 1680, and the craters from which the streams of basalt issued have lost their outline.

    [Illustration: CAPE VERDE Is. map.]

    Climate.--The atmosphere of the islands is generally hazy, especially in the direction of Africa. With occasional exceptions during summer and autumn, the north-east trade is the prevailing wind, blowing most strongly from November to May. The rainy season is during August, September and October, when there is thunder and a light variable wind from south-east or south-west. The Harmattan, a very dry east wind from the African continent, occasionally makes itself felt. The heat of summer is high, the thermometer ranging from 80 deg. to 90 deg. Fahr. near the sea.

    The unhealthy season is the period during and following the rains, when vegetation springs up with surprising rapidity, and there is much stagnant water, poisoning the air on the lower grounds.

    Remittent fevers are then common. The people of all the islands are also subject in May to an endemic of a bilious nature called locally levadias, but the cases rarely assume a dangerous form, and recovery is usually attained in three or four days without medical aid. On some of the islands rain has occasionally not fallen for three years. The immediate consequence is a failure of the crops, and this is followed by the death of great numbers from starvation, or the epidemics which usually break out afterwards.

    Flora.--Owing largely to the widespread destruction of timber for fuel, and to the frequency of drought, the flora of the islands is poor when compared with that of the Canaries, the Azores or Madeira. It is markedly tropical in character; and although some seventy wild-flowers, grasses, ferns, &c., are peculiar to the archipelago, the majority of plants are those found on the neighbouring African littoral. Systematic afforestation has not been attempted, but the Portuguese have introduced a few trees, such as the baobab, eucalyptus and dragon-tree, besides many plants of economic value.

    Coffee-growing, an industry dating from 1790, is the chief resource of the people of Santo Antao, Fogo and Sao Thiago; maize, millet, sugar-cane, manioc, excellent oranges, pumpkins, sweet potatoes, and, to a less extent, tobacco and cotton are produced.

    On most of the islands coco-nut and date palms, tamarinds and bananas may be seen; orchil is gathered; and indigo and castor-oil are produced.

    Of considerable importance is the physic-nut (Jatropha curcas), which is exported.

    Fauna.--Quails are found in all the islands; rabbits in Boa Vista, Sao Thiago and Fogo; wild boars in Sao Thiago. Both black and grey rats are common. Goats, horses and asses are reared, and goatskins are exported.

    The neighbouring sea abounds with fish, and coral fisheries are carried on by a colony of Neapolitans in Sao Thiago. Turtles come from the African coast to lay their eggs on the sandy shores. The Ilheu Branco, or White Islet, between Sao Nicolao and Santa Luzia, is remarkable as containing a variety of puffin unknown elsewhere, and a species of large lizard (Macroscinctus coctei) which feeds on plants.

    Inhabitants.--The first settlers on the islands imported negro slaves from the African coast. Slavery continued in full force until 1854, when the Portuguese government freed the public slaves, and ameliorated the conditions of private ownership. In 1857 arrangements were made for the gradual abolition of slavery, and by 1876 the last slave had been liberated. The transportation of convicts from Portugal, a much-dreaded punishment, was continued until the closing years of the 19th century.

    It was the coexistence of these two forms of servitude, even more than the climate, which prevented any large influx of Portuguese colonists.

    Hence the blacks and mulattoes far outnumber the white inhabitants. They are, as a rule, taller than the Portuguese, and are of fine physique, with regular features but woolly hair. Slavery and the enervating climate have left their mark on the habits of the people, whose indolence and fatalism are perhaps their most obvious qualities. Their language is a bastard Portuguese, known as the lingua creoula. Their religion is Roman Catholicism, combined with a number of pagan beliefs and rites, which are fostered by the curandeiros or medicine men.

    These superstitions tend to disappear gradually before the advance of education, which has progressed considerably since 1867, when the first school, a lyceum, was opened in Ribeira Brava, the capital of Sao Nicolao. On all the inhabited islands, except Santa Luzia, there are churches and primary schools, conducted by the government or the priests. The children of the wealthier classes are sent to Lisbon for their education.

    Government.--The archipelago forms one of the foreign provinces of Portugal, and is under the command of a governor-in-chief appointed by the crown. There are two principal judges, one for the windward and another for the leeward group, the former with his residence at Sao Nicolao, and the latter at Praia; and each island has a military commandant, a few soldiers, and a number of salaried officials, such as police, magistrates and custom-house directors. There is also an ecclesiastical establishment, with a bishop, dean and canons.

    Industries.--The principal industries, apart from agriculture, are the manufacture of sugar, spirits, salt, cottons and straw hats and fish-curing. The average yearly value of the exports is about L60,000; that of the imports (including L200,000 for coal), about L350,000. The most important of the exports are coffee, physic-nuts, millet, sugar, spirits, salt, live animals, skins and fish. This trade is principally carried on with Lisbon and the Portuguese possessions on the west coast of Africa, and with passing vessels. The imports consist principally of coal, textiles, food-stuffs, wine, metals, tobacco, machinery, pottery and vegetables.

    Over 3000 vessels, with a total tonnage exceeding 3,500,000, annually enter the ports of the archipelago; the majority call at Mindello, on Sao Vicente, for coal, and do not receive or discharge any large quantities of cargo.

    Santo Antao (pop. 25,000), at the extreme north-west of the
    archipelago, has an area of 265 sq. m. Its surface is very rugged and
    mountainous, abounding in volcanic craters, of which the chief is the
    Topoda Coroa (7300 ft.), also known as the Sugar-loaf. Mineral springs
    exist in many places. The island is the most picturesque, the
    healthiest, and, on its north-western slope, the best watered and most
    fertile of the archipelago.

    The south-eastern slope, shut out by lofty
    mountains from the fertilizing moisture of the trade-winds, has an
    entirely different appearance, black rocks, white pumice and red clay
    being its most characteristic features. Santo Antao produces large
    quantities of excellent coffee, besides sugar and fruit. It has
    several small ports, of which the chief are the sheltered and spacious
    Tarrafal Bay, on the south-west coast, and the more frequented Ponta
    do Sol, on the north-east, 8 m. from the capital, Ribeira Grande, a
    town of 4500 inhabitants.

    Cinchona is cultivated in the neighbourhood.
    In 1780 the slaves on Santo Antao were declared free, but this decree
    was not carried out. About the same time many white settlers, chiefly
    from the Canaries, entered the island, and introduced the cultivation
    of wheat.

    Sao Vicente, or St Vincent (8000), lies near Santo Antao, on the
    south-east, and has an area of 75 sq. m. Its highest point is Monte
    Verde (2400 ft.). The whole island is as arid and sterile as the
    south-eastern half of Santo Antao, and for the same reason. It was
    practically uninhabited until 1795; in 1829 its population numbered
    about 100.

    Its harbour, an extinct crater on the north coast, with an
    entrance eroded by the sea, affords complete shelter from every wind.
    An English speculator founded a coaling station here in 1851, and the
    town of Mindello, also known as Porto Grande or St Vincent, grew up
    rapidly, and became the commercial centre of the archipelago. Most of
    the business is in English hands, and nine-tenths of the inhabitants
    understand English. Foodstuffs, wood and water are imported from Santo
    Antao, and the water is stored in a large reservoir at Mindello. Sao
    Vicente has a station for the submarine cable from Lisbon to
    Pernambuco in Brazil.

    Santa Luzia, about 5 m. south-east, has an area of 18 sq. m., and
    forms a single estate, occupied only by the servants or the family of
    the proprietor. Its highest point is 885 ft. above sea-level. On the
    south-west it has a good harbour, visited by whaling and fishing
    boats. Much orchil was formerly gathered, and there is good pasturage
    for the numerous herds of cattle. A little to the south are the
    uninhabited islets of Branco and Razo.

    Sao Nicolao, or Nicolau (12,000), a long, narrow, crescent-shaped
    island with an area of 126 sq. m., lies farther east, near the middle
    of the archipelago. Its climate is not very healthy. Maize,
    kidney-beans, manioc, sugar-cane and vines are cultivated; and in
    ordinary years grain is exported to the other islands. The interior is
    mountainous, and culminates in two peaks which can be seen for many
    leagues; one has the shape of a sugar-loaf, and is near the middle of
    the island; the other, Monte Gordo, is near the west end, and has a
    height of 4280 ft.

    All the other islands of the group can be seen from
    Sao Nicolao in clear weather. Vessels frequently enter Preguica, or
    Freshwater Bay, near the south-east extremity of the island, for water
    and fresh provisions; and the custom-house is here. The island was one
    of the first colonized; in 1774 its inhabitants numbered 13,500, but
    famine subsequently caused a great decrease. The first capital, Lapa,
    at the end of a promontory on the south, was abandoned during the
    period of Spanish ascendancy over Portugal (1580-1640) in favour of
    Ribeira Brava (4000), on the north coast, a town which now has a
    considerable trade.

    Sal (750), in the north-east of the archipelago, has an area of 75
    sq. m. It was originally named Lana, or Lhana ("plain"), from the
    flatness of the greater part of its surface. It derives its modern
    name from a natural salt-spring, but most of the salt produced here is
    now obtained from artificial salt-pans. Towards the close of the 17th
    century it was inhabited only by a few shepherds, and by slaves
    employed in the salt-works. In 1705 it was entirely abandoned, owing
    to drought and consequent famine; and only in 1808 was the manufacture
    of salt resumed.

    A railway, the first built in Portuguese territory,
    was opened in 1835. The hostile Brazilian tariffs of 1889 for a time
    nearly destroyed the salt trade. Whales, turtles and fish are
    abundant, and dairy-farming is a prosperous industry. There are many
    small harbours, which render every part of the island easily
    accessible.

    Boa Vista (2600), the most easterly island of the archipelago, has
    an area of 235 sq. m. It was named Sao Christovao by its discoverers
    in the 15th century. Its modern name, meaning "fair view," is
    singularly inappropriate, for with the exception of a few coco-nut
    trees there is no wood, and in the dry season the island seems nothing
    but an arid waste. The little vegetation that then exists is in the
    bottom of ravines, where corn, beans and cotton are cultivated. The
    springs of good water are few.

    The coast is indented by numerous
    shallow bays, the largest of which is the harbour of the capital,
    Porto Sal-Rei, on the western side (pop. about 1000). A chain of
    heights, flanked by inferior ranges, traverses the middle of Boa
    Vista, culminating in Monte Gallego (1250 ft.), towards the east. In
    the north-western angle of the island there is a low tract of loose
    sand, which is inundated with water during the rainy season; and here
    are some extensive salt-pans, where the sea-water is evaporated by the
    heat of the sun. Salt and orchil are exported.

    A good deal of fish is
    taken on the coast and supplies the impoverished islanders with much
    of their food.

    Maio (1000) has an area of 70 sq. m., and resembles Sal and Boa
    Vista in climate and configuration, although it belongs to the
    Sotavento group. Its best harbour is that of Nossa Senhora da Luz, on
    the south-west coast, and is commonly known as Porto Inglez or English
    Road, from the fact that it was occupied until the end of the 18th
    century by the British, who based their claim on the marriage-treaty
    between Charles II. and Catherine of Braganza (1662). The island is a
    barren, treeless waste, surrounded by rocks.

    Its inhabitants, who live
    chiefly by the manufacture of salt, by cattle-farming and by fishing,
    are compelled to import most of their provisions from Sao Thiago, with
    which, for purposes of local administration, Maio is included.

    Sao Thiago (63,000) is the most populous and the largest of the Cape
    Verde Islands, having an area of 350 sq. m. It is also one of the most
    unhealthy, except among the mountains over 2000 ft. high. The interior
    is a mass of volcanic heights, formed of basalt covered with chalk and
    clay, and culminating in the central Pico da Antonia (4500 ft.), a
    sharply pointed cone. There are numerous ravines, furrowed by
    perennial streams, and in these ravines are grown large quantities of
    coffee, oranges, sugar-cane and physic-nuts, besides a variety of
    tropical fruits and cereals.

    Spirits are distilled from sugar-cane,
    and coarse sugar is manufactured. The first capital of the islands was
    Ribeira Grande, to-day called Cidade Velha or the Old City, a
    picturesque town with a cathedral and ruined fort. It was built in the
    15th century on the south coast, was made an episcopal see in 1532,
    and became capital of the archipelago in 1592. In 1712 it was sacked
    by a French force, but despite its poverty and unhealthy situation it
    continued to be the capital until 1770, when its place was taken by
    Praia on the south-east. Praia (often written Praya) has a fine
    harbour, a population of 21,000 and a considerable trade.

    It contains
    the palace of the governor-general, a small natural history museum, a
    meteorological observatory and an important station for the cables
    between South America, Europe and West Africa. It occupies a basalt
    plateau, overlooking the bay (Porto da Praia), and has an attractive
    appearance, with its numerous coco-nut trees and the peak of Antonia
    rising in the background above successive steps of tableland. Its
    unhealthiness has been mitigated by the partial drainage of a marsh
    lying to the east.

    Fogo (17,600) is a mass of volcanic rock, almost circular in shape
    and measuring about 190 sq. m. In the centre a still active volcano,
    the Pico do Cano, rises to a height of about 10,000 ft. Its crater,
    which stands within an older crater, measures 3 m. in circumference
    and is visible at sea for nearly 100 m. It emits smoke and ashes at
    intervals; and in 1680, 1785, 1799, 1816, 1846, 1852 and 1857 it was
    in eruption.

    After the first and most serious of these outbreaks, the
    island, which had previously been called Sao Felippe, was renamed
    Fogo, i.e. "Fire." The ascent of the mountain was first made in 1819
    by two British naval officers, named Vidal and Mudge. The island is
    divided, like Santo Antao, into a fertile and a sterile zone. Its
    northern half produces fine coffee, beans, maize and sugar-cane; the
    southern half is little better than a desert, with oases of cultivated
    land near its few springs. Sao Felippe or Nossa Senhora da Luz (3000),
    on the west coast, is the capital.

    The islanders claim to be the
    aristocracy of the archipelago, and trace their descent from the
    original Portuguese settlers. The majority, however, are negroes or
    mulattoes. Drought and famine, followed by severe epidemics, have
    been especially frequent here, notably in the years 1887-1889.

    Brava (9013), the most southerly of the islands, has an area of 23
    sq. m. Though mountainous, and in some parts sterile, it is very
    closely cultivated, and, unlike the other islands, is divided into a
    multitude of small holdings. The desire to own land is almost
    universal, and as the population numbers upwards of 380 per sq. m.,
    and the system of tenure gives rise to many disputes, the peasantry
    are almost incessantly engaged in litigation. The women, who are
    locally celebrated for their beauty, far outnumber the men, who
    emigrate at an early age to America.

    These emigrants usually return
    richer and better educated than the peasantry of the neighbouring
    islands. To the north of Brava lie a group of reefs among which two
    islets (Ilheus Seccos or Ilheus do Rombo) are conspicuous. These are
    usually known as the Ilheu de Dentro (Inner Islet) and the Ilheu de
    Fora (Outer Islet). The first is used as a shelter for whaling and
    fishing vessels, and as pasturage for cattle; the second has supplied
    much guano for export.

    History.--The earliest known discovery of the islands was made in 1456 by the Venetian captain Alvise Cadamosto (q.v.), who had entered the service of Prince Henry the Navigator. The archipelago was granted by King Alphonso V. of Portugal to his brother, Prince Ferdinand, whose agents completed the work of discovery. Ferdinand was an absolute monarch, exercising a commercial monopoly. In 1461 he sent an expedition to recruit slaves on the coast of Guinea and thus to people the islands, which were almost certainly uninhabited at the time.

    On his death in 1470 his privileges reverted to the crown, and were bestowed by John II. on Prince Emanuel, by whose accession to the throne in 1495 the archipelago finally became part of the royal dominions. Its population and importance rapidly increased; its first bishop was consecrated in 1532, its first governor-general appointed about the end of the century.

    It was enriched by the frequent visits of Portuguese fleets, on their return to Europe laden with treasure from the East, and by the presence of immigrants from Madeira, who introduced better agricultural methods and several new industries, such as dyeing and distillation of spirits.

    The failure to maintain an equal rate of progress in the 18th and 19th centuries was due partly to drought, famine and disease--in particular, to the famines of 1730-1733 and 1831-1833--and partly to gross misgovernment by the Portuguese officials.

    The best general account of the islands is given in vols. xxiii. and
    xxvii. of the Boletim of the Lisbon Geographical Society (1905 and
    1908), and in Madeira, Cabo Verde, e Guine, by J.A. Martins (Lisbon,
    1891). Official statistics are published in Lisbon at irregular
    intervals. See also Uber die Capverden (Leipzig, 1884) and Die
    Vulcane der Capverden
    (Graz, 1882), both by C. Dolter. A useful map,
    entitled Ocean Atlantico Norte, Archipelago do Cabo Verde, was
    issued in 1900 by the Commissao de Cartographia, Lisbon.

    CAPGRAVE, JOHN (1393-1464), English chronicler and hagiologist, was born at Lynn in Norfolk on the 21st of April 1393. He became a priest, took the degree of D.D. at Oxford, where he lectured on theology, and subsequently joined the order of Augustinian hermits. Most of his life he spent in the house of the order at Lynn, of which he probably became prior; he was certainly provincial of his order in England, which involved visits to other friaries, and he made at least one journey to Rome. He died on the 12th of August 1464.

    Capgrave was an indefatigable student, and was reputed one of the most learned men of his age. The bulk of his works are theological: sermons, commentaries and lives of saints. His reputation as a hagiologist rests on his Nova legenda Angliae, or Catalogus of the English saints, but this was no more than a recension of the Sanctilogium which the chronicler John of Tinmouth, a monk of St Albans, had completed in 1366, which in its turn was largely borrowed from the Sanctilogium of Guido, abbot of St Denis.

    The Nova legenda was printed by Wynkyn de Worde in 1516 and again in 1527. Capgrave's historical works are The Chronicle of England (from the Creation to 1417), written in English and unfinished at his death, and the Liber de illustribus Henricis, completed between 1446 and 1453. The latter is a collection of lives of German emperors (918-1198), English kings (1100-1446) and other famous Henries in various parts of the world (1031-1406).

    The portion devoted to Henry VI. of England is a contemporary record, but consists mainly of ejaculations in praise of the pious king. The accounts of the other English Henries are transferred from various well-known chroniclers. The Chronicle was edited for the "Rolls" Series by Francis Charles Hingeston (London, 1858); the Liber de illustrious Henricis was edited (London, 1858) for the same series by F.C. Hingeston, who published an English translation the same year. The editing of both the works is very uncritical and bad.

    See Potthast, Bibliotheka Med. Aev.; and U. Chevalier, Repertoire
    des sources hist. Bio-bibliographie, s.v.

    CAP HAITIEN, CAPE HAITIEN or HAYTIEN, a seaport of Haiti West Indies.

    Pop. about 15,000. It is situated on the north coast, 90 m. N. of Port au Prince, in 19 deg. 46' N. and 72 deg. 14' W. Its original Indian name was Guarico, and it has been known, at various times, as Cabo Santo, Cap Francais and Cape Henri, while throughout Haiti it is always called Le Cap. It is the most picturesque town in the republic, and the second in importance. On three sides it is hemmed in by lofty mountains, while on the fourth it overlooks a safe and commodious harbour.

    Under the French rule it was the capital of the colony, and its splendour, wealth and luxury earned for it the title of the "Paris of Haiti." It was then the see of an archbishop and possessed a large and flourishing university.

    The last remains of its former glory were destroyed by the earthquake of 1842 and the British bombardment of 1865. Although now but a collection of squalid wooden huts, with here and there a well-built warehouse, it is the centre of a thriving district and does a large export trade. It was founded by the Spaniards about the middle of the 17th century, and in 1687 received a large French colony. In 1695 it was taken and burned by the British, and in 1791 it suffered the same fate at the hands of Toussaint L'Ouverture. It then became the capital of King Henri Christophe's dominions, but since his fall has suffered severely in numerous revolutions.

    CAPILLARY ACTION.[1] A tube, the bore of which is so small that it will only admit a hair (Lat. capilla), is called a capillary tube. When such a tube of glass, open at both ends, is placed vertically with its lower end immersed in water, the water is observed to rise in the tube, and to stand within the tube at a higher level than the water outside.

    The action between the capillary tube and the water has been called capillary action, and the name has been extended to many other phenomena which have been found to depend on properties of liquids and solids similar to those which cause water to rise in capillary tubes.

    The forces which are concerned in these phenomena are those which act between neighbouring parts of the same substance, and which are called forces of cohesion, and those which act between portions of matter of different kinds, which are called forces of adhesion. These forces are quite insensible between two portions of matter separated by any distance which we can directly measure. It is only when the distance becomes exceedingly small that these forces become perceptible. G.H.

    Quincke (Pogg. Ann. cxxxvii. p. 402) made experiments to determine the greatest distance at which the effect of these forces is sensible, and he found for various substances distances about the twenty-thousandth part of a millimetre.

    Historical.--According to J.C. Poggendorff (Pogg. Ann. ci. p. 551), Leonardo da Vinci must be considered as the discoverer of capillary phenomena, but the first accurate observations of the capillary action of tubes and glass plates were made by Francis Hawksbee (Physico-Mechanical Experiments, London, 1709, pp. 139-169; and Phil.

    Trans., 1711 and 1712), who ascribed the action to an attraction between the glass and the liquid. He observed that the effect was the same in thick tubes as in thin, and concluded that only those particles of the glass which are very near the surface have any influence on the phenomenon. Dr James Jurin (Phil. Trans., 1718, p. 739, and 1719, p.

    1. showed that the height at which the liquid is suspended depends on

    the section of the tube at the surface of the liquid, and is independent of the form of the lower part of the tube. He considered that the suspension of the liquid is due to "the attraction of the periphery or section of the surface of the tube to which the upper surface of the water is contiguous and coheres." From this he showed that the rise of the liquid in tubes of the same substance is inversely proportional to their radii.

    Sir Isaac Newton devoted the 31st query in the last edition of his Opticks to molecular forces, and instanced several examples of the cohesion of liquids, such as the suspension of mercury in a barometer tube at more than double the height at which it usually stands. This arises from its adhesion to the tube, and the upper part of the mercury sustains a considerable tension, or negative pressure, without the separation of its parts.

    He considered the capillary phenomena to be of the same kind, but his explanation is not sufficiently explicit with respect to the nature and the limits of the action of the attractive force.

    It is to be observed that, while these early speculators ascribe the phenomena to attraction, they do not distinctly assert that this attraction is sensible only at insensible distances, and that for all distances which we can directly measure the force is altogether insensible. The idea of such forces, however, had been distinctly formed by Newton, who gave the first example of the calculation of the effect of such forces in his theorem on the alteration of the path of a light-corpuscle when it enters or leaves a dense body.

    Alexis Claude Clairault (Theorie de la figure de la terre, Paris, 1808, pp. 105, 128) appears to have been the first to show the necessity of taking account of the attraction between the parts of the fluid itself in order to explain the phenomena. He did not, however, recognize the fact that the distance at which the attraction is sensible is not only small but altogether insensible. J.A. von Segner (Comment. Soc.

    Reg. Gotting, i. (1751) p. 301) introduced the very important idea of the surface-tension of liquids, which he ascribed to attractive forces, the sphere of whose action is so small "ut nullo adhuc sensu percipi potuerit." In attempting to calculate the effect of this surface-tension in determining the form of a drop of the liquid, Segner took account of the curvature of a meridian section of the drop, but neglected the effect of the curvature in a plane at right angles to this section.

    The idea of surface-tension introduced by Segner had a most important effect on the subsequent development of the theory. We may regard it as a physical fact established by experiment in the same way as the laws of the elasticity of solid bodies. We may investigate the forces which act between finite portions of a liquid in the same way as we investigate the forces which act between finite portions of a solid.

    The experiments on solids lead to certain laws of elasticity expressed in terms of coefficients, the values of which can be determined only by experiments on each particular substance. Various attempts have also been made to deduce these laws from particular hypotheses as to the action between the molecules of the elastic substance. We may therefore regard the theory of elasticity as consisting of two parts.

    The first part establishes the laws of the elasticity of a finite portion of the solid subjected to a homogeneous strain, and deduces from these laws the equations of the equilibrium and motion of a body subjected to any forces and displacements. The second part endeavours to deduce the facts of the elasticity of a finite portion of the substance from hypotheses as to the motion of its constituent molecules and the forces acting between them.

    In like manner we may by experiment ascertain the general fact that the surface of a liquid is in a state of tension similar to that of a membrane stretched equally in all directions, and prove that this tension depends only on the nature and temperature of the liquid and not on its form, and from this as a secondary physical principle we may deduce all the phenomena of capillary action. This is one step of the investigation.

    The next step is to deduce this surface-tension from a hypothesis as to the molecular constitution of the liquid and of the bodies that surround it. The scientific importance of this step is to be measured by the degree of insight which it affords or promises into the molecular constitution of real bodies by the suggestion of experiments by which we may discriminate between rival molecular theories.

    In 1756 J.G. Leidenfrost (De aquae communis nonnullis qualitatibus tractatus, Duisburg) showed that a soap-bubble tends to contract, so that if the tube with which it was blown is left open the bubble will diminish in size and will expel through the tube the air which it contains. He attributed this force, however, not to any general property of the surfaces of liquids, but to the fatty part of the soap which he supposed to separate itself from the other constituents of the solution, and to form a thin skin on the outer face of the bubble.

    In 1787 Gaspard Monge (Memoires de l'Acad. des Sciences, 1787, p.

    506) asserted that "by supposing the adherence of the particles of a fluid to have a sensible effect only at the surface itself and in the direction of the surface it would be easy to determine the curvature of the surfaces of fluids in the neighbourhood of the solid boundaries which contain them; that these surfaces would be linteariae of which the tension, constant in all directions, would be everywhere equal to the adherence of two particles, and the phenomena of capillary tubes would then present nothing which could not be determined by analysis." He applied this principle of surface-tension to the explanation of the apparent attractions and repulsions between bodies floating on a liquid.

    In 1802 John Leslie (Phil. Mag., 1802, vol. xiv. p. 193) gave the first correct explanation of the rise of a liquid in a tube by considering the effect of the attraction of the solid on the very thin stratum of the liquid in contact with it. He did not, like the earlier speculators, suppose this attraction to act in an upward direction so as to support the fluid directly. He showed that the attraction is everywhere normal to the surface of the solid.

    The direct effect of the attraction is to increase the pressure of the stratum of the fluid in contact with the solid, so as to make it greater than the pressure in the interior of the fluid. The result of this pressure if unopposed is to cause this stratum to spread itself over the surface of the solid as a drop of water is observed to do when placed on a clean horizontal glass plate, and this even when gravity opposes the action, as when the drop is placed on the under surface of the plate.

    Hence a glass tube plunged into water would become wet all over were it not that the ascending liquid film carries up a quantity of other liquid which coheres to it, so that when it has ascended to a certain height the weight of the column balances the force by which the film spreads itself over the glass.

    This explanation of the action of the solid is equivalent to that by which Gauss afterwards supplied the defect of the theory of Laplace, except that, not being expressed in terms of mathematical symbols, it does not indicate the mathematical relation between the attraction of individual particles and the final result.

    Leslie's theory was afterwards treated according to Laplace's mathematical methods by James Ivory in the article on capillary action, under "Fluids, Elevation of," in the supplement to the fourth edition of the Encyclopaedia Britannica, published in 1819.

    In 1804 Thomas Young (Essay on the "Cohesion of Fluids," Phil. Trans., 1805, p. 65) founded the theory of capillary phenomena on the principle of surface-tension. He also observed the constancy of the angle of contact of a liquid surface with a solid, and showed how from these two principles to deduce the phenomena of capillary action. His essay contains the solution of a great number of cases, including most of those afterwards solved by Laplace, but his methods of demonstration, though always correct, and often extremely elegant, are sometimes rendered obscure by his scrupulous avoidance of mathematical symbols.

    Having applied the secondary principle of surface-tension to the various particular cases of capillary action, Young proceeded to deduce this surface-tension from ulterior principles. He supposed the particles to act on one another with two different kinds of forces, one of which, the attractive force of cohesion, extends to particles at a greater distance than those to which the repulsive force is confined. He further supposed that the attractive force is constant throughout the minute distance to which it extends, but that the repulsive force increases rapidly as the distance diminishes.

    He thus showed that at a curved part of the surface, a superficial particle would be urged towards the centre of curvature of the surface, and he gave reasons for concluding that this force is proportional to the sum of the curvatures of the surface in two normal planes at right angles to each other.

    The subject was next taken up by Pierre Simon Laplace (Mecanique celeste, supplement to the tenth book, pub. in 1806). His results are in many respects identical with those of Young, but his methods of arriving at them are very different, being conducted entirely by mathematical calculations. The form into which he threw his investigation seems to have deterred many able physicists from the inquiry into the ulterior cause of capillary phenomena, and induced them to rest content with deriving them from the fact of surface-tension.

    But for those who wish to study the molecular constitution of bodies it is necessary to study the effect of forces which are sensible only at insensible distances; and Laplace has furnished us with an example of the method of this study which has never been surpassed. Laplace investigated the force acting on the fluid contained in an infinitely slender canal normal to the surface of the fluid arising from the attraction of the parts of the fluid outside the canal.

    He thus found for the pressure at a point in the interior of the fluid an expression of the form

    p = K + 1/2H(1/R + 1/R')

    where K is a constant pressure, probably very large, which, however, does not influence capillary phenomena, and therefore cannot be determined from observation of such phenomena; H is another constant on which all capillary phenomena depend; and R and R' are the radii of curvature of any two normal sections of the surface at right angles to each other.

    In the first part of our own investigation we shall adhere to the symbols used by Laplace, as we shall find that an accurate knowledge of the physical interpretation of these symbols is necessary for the further investigation of the subject. In the Supplement to the Theory of Capillary Action, Laplace deduced the equation of the surface of the fluid from the condition that the resultant force on a particle at the surface must be normal to the surface. His explanation, however, of the rise of a liquid in a tube is based on the assumption of the constancy of the angle of contact for the same solid and fluid, and of this he has nowhere given a satisfactory proof.

    In this supplement Laplace gave many important applications of the theory, and compared the results with the experiments of Louis Joseph Gay Lussac.

    The next great step in the treatment of the subject was made by C.F.

    Gauss (Principia generalia Theoriae Figurae Fluidorum in statu Aequilibrii, Gottingen, 1830, or Werke, v. 29, Gottingen, 1867). The principle which he adopted is that of virtual velocities, a principle which under his hands was gradually transforming itself into what is now known as the principle of the conservation of energy.

    Instead of calculating the direction and magnitude of the resultant force on each particle arising from the action of neighbouring particles, he formed a single expression which is the aggregate of all the potentials arising from the mutual action between pairs of particles. This expression has been called the force-function. With its sign reversed it is now called the potential energy of the system.

    It consists of three parts, the first depending on the action of gravity, the second on the mutual action between the particles of the fluid, and the third on the action between the particles of the fluid and the particles of a solid or fluid in contact with it.

    The condition of equilibrium is that this expression (which we may for the sake of distinctness call the potential energy) shall be a minimum.

    This condition when worked out gives not only the equation of the free surface in the form already established by Laplace, but the conditions of the angle of contact of this surface with the surface of a solid.

    Gauss thus supplied the principal defect in the great work of Laplace.

    He also pointed out more distinctly the nature of the assumptions which we must make with respect to the law of action of the particles in order to be consistent with observed phenomena. He did not, however, enter into the explanation of particular phenomena, as this had been done already by Laplace, but he pointed out to physicists the advantages of the method of Segner and Gay Lussac, afterwards carried out by Quincke, of measuring the dimensions of large drops of mercury on a horizontal or slightly concave surface, and those of large bubbles of air in transparent liquids resting against the under side of a horizontal plate of a substance wetted by the liquid.

    In 1831 Simeon Denis Poisson published his Nouvelle Theorie de l'action capillaire. He maintained that there is a rapid variation of density near the surface of a liquid, and he gave very strong reasons, which have been only strengthened by subsequent discoveries, for believing that this is the case.

    He proceeded to an investigation of the equilibrium of a fluid on the hypothesis of uniform density, and arrived at the conclusion that on this hypothesis none of the observed capillary phenomena would take place, and that, therefore, Laplace's theory, in which the density is supposed uniform, is not only insufficient but erroneous.

    In particular he maintained that the constant pressure K, which occurs in Laplace's theory, and which on that theory is very large, must be in point of fact very small, but the equation of equilibrium from which he concluded this is itself defective. Laplace assumed that the liquid has uniform density, and that the attraction of its molecules extends to a finite though insensible distance.

    On these assumptions his results are certainly right, and are confirmed by the independent method of Gauss, so that the objections raised against them by Poisson fall to the ground. But whether the assumption of uniform density be physically correct is a very different question, and Poisson rendered good service to science in showing how to carry on the investigation on the hypothesis that the density very near the surface is different from that in the interior of the fluid.

    The result, however, of Poisson's investigation is practically equivalent to that already obtained by Laplace. In both theories the equation of the liquid surface is the same, involving a constant H, which can be determined only by experiment. The only difference is in the manner in which this quantity H depends on the law of the molecular forces and the law of density near the surface of the fluid, and as these laws are unknown to us we cannot obtain any test to discriminate between the two theories.

    We have now described the principal forms of the theory of capillary action during its earlier development. In more recent times the method of Gauss has been modified so as to take account of the variation of density near the surface, and its language has been translated in terms of the modern doctrine of the conservation of energy.[2]

    J.A.F. Plateau (Statique experimentale et theorique des liquides), who made elaborate study of the phenomena of surface-tension, adopted the following method of getting rid of the effects of gravity. He formed a mixture of alcohol and water of the same density as olive oil, and then introduced a quantity of oil into the mixture. It assumes the form of a sphere under the action of surface-tension alone. He then, by means of rings of iron-wire, disks and other contrivances, altered the form of certain parts of the surface of the oil.

    The free portions of the surface then assume new forms depending on the equilibrium of surface-tension. In this way he produced a great many of the forms of equilibrium of a liquid under the action of surface-tension alone, and compared them with the results of mathematical investigation. He also greatly facilitated the study of liquid films by showing how to form a liquid, the films of which will last for twelve or even for twenty-four hours.

    The debt which science owes to Plateau is not diminished by the fact that, while investigating these beautiful phenomena, he never himself saw them, having lost his sight in about 1840.

    G.L. van der Mensbrugghe (Mem. de l'Acad. Roy. de Belgique, xxxvii.,

    1. devised a great number of beautiful illustrations of the

    phenomena of surface-tension, and showed their connexion with the experiments of Charles Tomlinson on the figures formed by oils dropped on the clean surface of water.

    Athanase Dupre in his 5th, 6th and 7th Memoirs on the Mechanical Theory of Heat (Ann. de Chimie et de Physique, 1866-1868) applied the principles of thermodynamics to capillary phenomena, and the experiments of his son Paul were exceedingly ingenious and well devised, tracing the influence of surface-tension in a great number of very different circumstances, and deducing from independent methods the numerical value of the surface-tension. The experimental evidence which Dupre obtained bearing on the molecular structure of liquids must be very valuable, even if our present opinions on this subject should turn out to be erroneous.

    F.H.R. Ludtge (Pogg. Ann. cxxxix. p. 620) experimented on liquid films, and showed how a film of a liquid of high surface-tension is replaced by a film of lower surface-tension. He also experimented on the effects of the thickness of the film, and came to the conclusion that the thinner a film is, the greater is its tension.

    This result, however, was tested by Van der Mensbrugghe, who found that the tension is the same for the same liquid whatever be the thickness, as long as the film does not burst. [The continued coexistence of various thicknesses, as evidenced by the colours in the same film, affords an instantaneous proof of this conclusion.] The phenomena of very thin liquid films deserve the most careful study, for it is in this way that we are most likely to obtain evidence by which we may test the theories of the molecular structure of liquids.

    Sir W. Thomson (afterwards Lord Kelvin) investigated the effect of the curvature of the surface of a liquid on the thermal equilibrium between the liquid and the vapour in contact with it. He also calculated the effect of surface-tension on the propagation of waves on the surface of a liquid, and determined the minimum velocity of a wave, and the velocity of the wind when it is just sufficient to disturb the surface of still water.

    THEORY OF CAPILLARY ACTION

    When two different fluids are placed in contact, they may either diffuse into each other or remain separate. In some cases diffusion takes place to a limited extent, after which the resulting mixtures do not mix with each other. The same substance may be able to exist in two different states at the same temperature and pressure, as when water and its saturated vapour are contained in the same vessel. The conditions under which the thermal and mechanical equilibrium of two fluids, two mixtures, or the same substance in two physical states in contact with each other, is possible belong to thermodynamics.

    All that we have to observe at present is that, in the cases in which the fluids do not mix of themselves, the potential energy of the system must be greater when the fluids are mixed than when they are separate.

    It is found by experiment that it is only very close to the bounding surface of a liquid that the forces arising from the mutual action of its parts have any resultant effect on one of its particles. The experiments of Quincke and others seem to show that the extreme range of the forces which produce capillary action lies between a thousandth and a twenty-thousandth part of a millimetre.

    We shall use the symbol [epsilon] to denote this extreme range, beyond which the action of these forces may be regarded as insensible. If [chi] denotes the potential energy of unit of mass of the substance, we may treat [chi] as sensibly constant except within a distance [epsilon] of the bounding surface of the fluid. In the interior of the fluid it has the uniform value [chi]0. In like manner the density, [rho], is sensibly equal to the constant quantity [rho]0, which is its value in the interior of the liquid, except within a distance [epsilon] of the bounding surface.

    Hence if V is the volume of a mass M of liquid bounded by a surface whose area is S, the integral / / / M = | | | [rho] dx dy dz, (1) ///

    where the integration is to be extended throughout the volume V, may be divided into two parts by considering separately the thin shell or skin extending from the outer surface to a depth [epsilon], within which the density and other properties of the liquid vary with the depth, and the interior portion of the liquid within which its properties are constant.

    Since [epsilon] is a line of insensible magnitude compared with the dimensions of the mass of liquid and the principal radii of curvature of its surface, the volume of the shell whose surface is S and thickness [epsilon] will be S[epsilon], and that of the interior space will be V - S[epsilon].

    If we suppose a normal [nu] less than [epsilon] to be drawn from the
    surface S into the liquid, we may divide the shell into elementary
    shells whose thickness is d[nu], in each of which the density and
    other properties of the liquid will be constant.

    The volume of one of these shells will be Sd[nu]. Its mass will be
    S[rho]d[nu]. The mass of the whole shell will therefore be

    / [epsilon]
    S | [ro]d[nu],
    /0

    and that of the interior part of the liquid (V - S[epsilon])[rho]0. We
    thus find for the whole mass of the liquid

    / [epsilon]
    M = V [rho]0 - S | ([rho]0 - [rho]) d[nu]. (2)
    /0

    To find the potential energy we have to integrate

    / / /
    E = | | | [chi][rho] dx dy dz (3)
    ///

    Substituting [chi][rho] for [rho] in the process we have just gone
    through, we find

    / [epsilon]
    E = V[chi]0[rho]0 - S | ([chi]0[rho]0 - [chi][rho]) d[nu]. (4)
    /0

    Multiplying equation (2) by [chi]0, and subtracting it from (4),

    / [epsilon]
    E - M[chi]0 = S | ([chi] - [chi]0) d[nu]. (5)
    /0

    In this expression M and [chi]0 are both constant, so that the
    variation of the right-hand side of the equation is the same as that
    of the energy E, and expresses that part of the energy which depends
    on the area of the bounding surface of the liquid. We may call this
    the surface energy.

    The symbol [chi] expresses the energy of unit of mass of the liquid at
    a depth [nu] within the bounding surface. When the liquid is in
    contact with a rare medium, such as its own vapour or any other gas,
    [chi] is greater than [chi]0, and the surface energy is positive. By
    the principle of the conservation of energy, any displacement of the
    liquid by which its energy is diminished will tend to take place of
    itself.

    Hence if the energy is the greater, the greater the area of
    the exposed surface, the liquid will tend to move in such a way as to
    diminish the area of the exposed surface, or, in other words, the
    exposed surface will tend to diminish if it can do so consistently
    with the other conditions. This tendency of the surface to contract
    itself is called the surface-tension of liquids.

    [Illustration: FIG. 1.]

    +-----------------------+
    |///////////////////////|
    |///////////////////////|
    ## |//A+---------------+A//|
    |///| |///|
    |///| |///|
    ## B =========================== B
    ## |///|C C|///|
    +---+ +---+

    Dupre has described an arrangement by which the surface-tension of a
    liquid film may be illustrated. A piece of sheet metal is cut out in
    the form AA (fig. 1). A very fine slip of metal is laid on it in the
    position BB, and the whole is dipped into a solution of soap, or M.
    Plateau's glycerine mixture. When it is taken out the rectangle AACC
    if filled up by a liquid film. This film, however, tends to contract
    on itself, and the loose strip of metal BB will, if it is let go, be
    drawn up towards AA, provided it is sufficiently light and smooth.

    Let T be the surface energy per unit of area; then the energy of a
    surface of area S will be ST. If, in the rectangle AACC, AA = a, and
    AC = b, its area is S = ab, and its energy Tab. Hence if F is the
    force by which the slip BB is pulled towards AA,

    d
    F = --- Tab = Ta, (6)
    db

    or the force arising from the surface-tension acting on a length a of
    the strip is Ta, so that T represents the surface-tension acting
    transversely on every unit of length of the periphery of the liquid
    surface. Hence if we write

    / [epsilon]
    T = | ([chi] - [chi]0) [rho] d[nu], (7)
    /0

    we may define T either as the surface-energy per unit of area, or as
    the surface-tension per unit of contour, for the numerical values of
    these two quantities are equal.

    If the liquid is bounded by a dense substance, whether liquid or
    solid, the value of [chi] may be different from its value when the
    liquid has a free surface. If the liquid is in contact with another
    liquid, let us distinguish quantities belonging to the two liquids by
    suffixes. We shall then have

    / [epsilon]1
    E1 - M1[chi]01 = S | ([chi]1 - [chi]01) [rho]1 d[nu]1, (8)
    / 0

    / [epsilon]2
    E2 - M2[chi]02 = S | ([chi]2 - [chi]02) [rho]2 d[nu]2. (9)
    / 0

    Adding these expressions, and dividing the second member by S, we
    obtain for the tension of the surface of contact of the two liquids

    / [epsilon]1 / [epsilon]2
    T1.2 = | ([chi]1 - [chi]01) [rho]1 d[nu]1 + | ([chi]2 - [chi]02) [rho]2 d[nu]2. (10)
    /0 /0

    If this quantity is positive, the surface of contact will tend to
    contract, and the liquids will remain distinct. If, however, it were
    negative, the displacement of the liquids which tends to enlarge the
    surface of contact would be aided by the molecular forces, so that the
    liquids, if not kept separate by gravity, would at length become
    thoroughly mixed. No instance, however, of a phenomenon of this kind
    has been discovered, for those liquids which mix of themselves do so
    by the process of diffusion, which is a molecular motion, and not by
    the spontaneous puckering and replication of the bounding surface as
    would be the case if T were negative.

    It is probable, however, that there are many cases in which the
    integral belonging to the less dense fluid is negative. If the denser
    body be solid we can often demonstrate this; for the liquid tends to
    spread itself over the surface of the solid, so as to increase the
    area of the surface of contact, even although in so doing it is
    obliged to increase the free surface in opposition to the
    surface-tension. Thus water spreads itself out on a clean surface of
    glass. This shows that

    / [epsilon]
    | ([chi] - [chi]0) [rho] d[nu]
    /0

    must be negative for water in contact with glass.

    On the Tension of Liquid Films.--The method already given for the investigation of the surface-tension of a liquid, all whose dimensions are sensible, fails in the case of a liquid film such as a soap-bubble.

    In such a film it is possible that no part of the liquid may be so far from the surface as to have the potential and density corresponding to what we have called the interior of a liquid mass, and measurements of the tension of the film when drawn out to different degrees of thinness may possibly lead to an estimate of the range of the molecular forces, or at least of the depth within a liquid mass, at which its properties become sensibly uniform. We shall therefore indicate a method of investigating the tension of such films.

    Let S be the area of the film, M its mass, and E its energy; [sigma]
    the mass, and e the energy of unit of area; then

    M = S[sigma], (11)

    E = Se. (12)

    Let us now suppose that by some change in the form of the boundary of
    the film its area is changed from S to S + dS. If its tension is T the
    work required to effect this increase of surface will be TdS, and the
    energy of the film will be increased by this amount. Hence

    TdS = dE = Sde + edS. (13)

    But since M is constant,

    dM = Sd[sigma] + [sigma]dS = 0. (14)

    Eliminating dS from equations (13) and (14), and dividing by S, we
    find

    de
    T = e - [sigma]--------, (15)
    d[sigma]

    In this expression [sigma] denotes the mass of unit of area of the
    film, and e the energy of unit of area.

    If we take the axis of z normal to either surface of the film, the
    radius of curvature of which we suppose to be very great compared with
    its thickness c, and if [rho] is the density, and [chi] the energy of
    unit of mass at depth z, then

    / c
    [sigma] = | [rho] dz, (16)
    /0

    and

    / c
    e = | [chi] [rho] dz. (17)
    /0

    Both [rho] and [chi] are functions of z, the value of which remains
    the same when z - c is substituted for z. If the thickness of the film
    is greater than 2 [epsilon], there will be a stratum of thickness c -
    2 [epsilon] in the middle of the film, within which the values of
    [rho] and [chi] will be [rho]0 and [chi]0. In the two strata on either
    side of this the law, according to which [rho] and [chi] depend on the
    depth, will be the same as in a liquid mass of large dimensions.

    Hence
    in this case

    / [epsilon]
    [sigma] = (c - 2[epsilon]) [rho]0 + 2 | [rho]d[nu], (18)
    /0

    / [epsilon]
    e = (c - 2[epsilon]) [chi]0[rho]0 + 2 | [chi][rho]d[nu], (19)
    / 0

    d[sigma] de de
    -------- = [rho]0, -- = [chi]0[rho]0, .: -------- = [chi]0,
    dc dc d[sigma]

    / [epsilon] / [epsilon]
    T = 2 | [chi][rho]d[nu] - 2[chi]0 | [rho]d[nu] =
    /0 / 0

    / [epsilon]
    2 | ([chi] - [chi]0)[rho]d[nu]. (20)
    /0

    Hence the tension of a thick film is equal to the sum of the tensions
    of its two surfaces as already calculated (equation 7). On the
    hypothesis of uniform density we shall find that this is true for
    films whose thickness exceeds [epsilon].

    The symbol [chi] is defined as the energy of unit of mass of the
    substance. A knowledge of the absolute value of this energy is not
    required, since in every expression in which it occurs it is under the
    form [chi] - [chi]0, that is to say, the difference between the
    energy in two different states. The only cases, however, in which we
    have experimental values of this quantity are when the substance is
    either liquid and surrounded by similar liquid, or gaseous and
    surrounded by similar gas. It is impossible to make direct
    measurements of the properties of particles of the substance within
    the insensible distance [epsilon] of the bounding surface.

    When a liquid is in thermal and dynamical equilibrium with its vapour,
    then if [rho]' and [chi]' are the values of [rho] and [chi] for the
    vapour, and [rho]0 and [chi]0 those for the liquid,

    [chi]' - [chi]0 = JL - p(1/[rho]' - 1/[rho]0), (21)

    where J is the dynamical equivalent of heat, L is the latent heat of
    unit of mass of the vapour, and p is the pressure. At points in the
    liquid very near its surface it is probable that [chi] is greater than
    [chi]0, and at points in the gas very near the surface of the liquid
    it is probable that [chi] is less than [chi]', but this has not as yet
    been ascertained experimentally. We shall therefore endeavour to apply
    to this subject the methods used in Thermodynamics, and where these
    fail us we shall have recourse to the hypotheses of molecular physics.

    We have next to determine the value of [chi] in terms of the action
    between one particle and another. Let us suppose that the force
    between two particles m and m' at the distance f is

    F = mm' ([phi](f) + Cf^-2), (22)

    being reckoned positive when the force is attractive. The actual force
    between the particles arises in part from their mutual gravitation,
    which is inversely as the square of the distance. This force is
    expressed by mm' Cf^-2. It is easy to show that a force subject to
    this law would not account for capillary action. We shall, therefore,
    in what follows, consider only that part of the force which depends on
    [phi](f), where [phi](f) is a function of f which is insensible for
    all sensible values of f, but which becomes sensible and even
    enormously great when f is exceedingly small.

    If we next introduce a new function of f and write

    / [oo]
    | [phi](f)df = [Pi](f), (23)
    /f

    then mm' [Pi](f) will represent--(1) The work done by the attractive
    force on the particle m, while it is brought from an infinite distance
    from m' to the distance f from m'; or (2) The attraction of a particle
    m on a narrow straight rod resolved in the direction of the length of
    the rod, one extremity of the rod being at a distance f from m, and
    the other at an infinite distance, the mass of unit of length of the
    rod being m'. The function [Pi](f) is also insensible for sensible
    values of f, but for insensible values of f it may become sensible and
    even very great.

    If we next write

    / [oo]
    | f[Pi](f)df = [psi](z), (24)
    /z

    then 2[pi]m[sigma][psi](z) will represent--(1) The work done by the
    attractive force while a particle m is brought from an infinite
    distance to a distance z from an infinitely thin stratum of the
    substance whose mass per unit of area is [sigma]; (2) The attraction
    of a particle m placed at a distance z from the plane surface of an
    infinite solid whose density is [sigma].

    [Illustration: FIG. 2]

    Let us examine the case in which the particle m is placed at a
    distance z from a curved stratum of the substance, whose principal
    radii of curvature are R1 and R2. Let P (fig. 2) be the particle and
    PB a normal to the surface. Let the plane of the paper be a normal
    section of the surface of the stratum at the point B, making an angle
    [omega] with the section whose radius of curvature is R1. Then if O is
    the centre of curvature in the plane of the paper, and BO = u,

    1 cos^2[omega] sin^2[omega]
    -- = ------------ + -----------. (25)
    u R1 R2

    Let POQ = [theta], PO = r, PQ = f, BP = z,

    f^2 = u^2 + r^2 - 2ur cos[theta]. (26)

    The element of the stratum at Q may be expressed by

    [sigma]u^2 sin[theta] d[theta] d[omega],

    or expressing d[Greek: th] in terms of df by (26),

    [sigma]ur^-1 f df d[omega].

    Multiplying this by m and by [pi](f), we obtain for the work done by
    the attraction of this element when m is brought from an infinite
    distance to P1,

    m[sigma]ur^-1 f[Pi](f)dfd[omega].

    Integrating with respect to f from f = z to f = a, where a is a line
    very great compared with the extreme range of the molecular force, but
    very small compared with either of the radii of curvature, we obtain
    for the work

    /
    | m[sigma]ur^-1 ([psi](z) - [psi](a))d[omega],
    /

    and since [psi](a) is an insensible quantity we may omit it. We may
    also write

    ur^-1 = 1 + zu^-1 + &c.,

    since z is very small compared with u, and expressing u in terms of
    [omega] by (25), we find

    / 2[pi] | /cos^2[omega] sin^2[omega]\ |
    | m[sigma][psi](z) | 1 + z ( ------------ + ------------ ) | d[omega] =
    ##
    /0 | \ R1 R2 / |

    | 1 /1 1 \ |
    2[pi]m[sigma][psi](z) | 1 + --z ( -- + -- ) |.
    ## | 2 \R1 R2/ |

    This then expresses the work done by the attractive forces when a
    particle m is brought from an infinite distance to the point P at a
    distance z from a stratum whose surface-density is [sigma], and whose
    principal radii of curvature are R1 and R2.

    To find the work done when m is brought to the point P in the
    neighbourhood of a solid body, the density of which is a function of
    the depth [nu] below the surface, we have only to write instead of
    [sigma][rho]dz, and to integrate

    / [oo] /1 1 \ / [oo]
    2[pi]m | [rho][psi](z)dz + [pi]m ( -- + -- ) | [rho]z[psi](z)dz,
    /z \R1 R2/ /z

    where, in general, we must suppose [rho] a function of z. This
    expression, when integrated, gives (1) the work done on a particle m
    while it is brought from an infinite distance to the point P, or (2)
    the attraction on a long slender column normal to the surface and
    terminating at P, the mass of unit of length of the column being m. In
    the form of the theory given by Laplace, the density of the liquid was
    supposed to be uniform.

    Hence if we write

    / [oo] / [oo]
    K = 2[pi] | [psi](z)dz, H = 2[pi] | z[psi](z)dz,
    /0 /0

    the pressure of a column of the fluid itself terminating at the
    surface will be

    [rho]^2 {K + 1/2H(1/R1 + 1/R2)},

    and the work done by the attractive forces when a particle m is
    brought to the surface of the fluid from an infinite distance will be

    m[rho] {K + 1/2H(1/R1 + 1/R2)},

    If we write

    / oo
    | [psi](z)dz = [theta](z),
    /z

    then 2[pi]m[rho][theta](z) will express the work done by-the
    attractive forces, while a particle m is brought from an infinite
    distance to a distance z from the plane surface of a mass of the
    substance of density [rho] and infinitely thick. The function
    [theta](z) is insensible for all sensible values of z. For insensible
    values it may become sensible, but it must remain finite even when z =
    0, in which case [theta](0) = K.

    If [chi]' is the potential energy of unit of mass of the substance in
    vapour, then at a distance z from the plane surface of the liquid

    [chi] = [chi]' - 2[pi][rho][theta](z).

    At the surface

    [chi] = [chi]' - 2[pi][rho][theta](0).

    At a distance z within the surface

    [chi] = [chi]' - 4[pi][rho][theta](0) + 2[pi][rho][theta](z).

    If the liquid forms a stratum of thickness c, then

    [chi] = [chi]' - 4[pi][rho][theta](0) + 2[pi][rho][theta](z) +

    + 2[pi][rho][theta](z - c).

    The surface-density of this stratum is [sigma] = c[rho]. The energy
    per unit of area is

    / c
    e = | [chi][rho]dz = c[rho]([chi]' - 4[pi][rho][theta](0)) +
    /0

    / c / c
    + 2[pi][rho]^2 | [theta](z)dz + 2[pi][rho]^2 | [theta](z - c)dz.
    /0 /0

    Since the two sides of the stratum are similar the last two terms are
    equal, and

    / c
    e = c[rho]([chi]' - 4[pi][rho][theta](0)) + 4[pi][rho]^2 | [theta](z)dz.
    /0

    Differentiating with respect to c, we find

    d[sigma] de
    -------- = [rho], -- = [rho]([chi]' - 4[pi][rho][theta](0)) + 4[pi][rho]^2[theta](c).
    dc dc

    Hence the surface-tension

    de / / c \
    T = e - [sigma] -------- = 4[pi][rho]^2 ( | [theta](z)dz - c[theta](c) ).
    d[sigma] \
    /0 /

    Integrating the first term within brackets by parts, it becomes

    / c d[theta]
    c[theta](c) - 0[theta](0) - | z -------- dz.
    /0 dz

    Remembering that c(0) is a finite quantity, and that

    d[theta]
    -------- = -[psi](z),
    dz

    we find

    / c
    T = 4[pi][rho]^2 | z[psi](z)dz. (27)
    /0

    When c is greater than [epsilon] this is equivalent to 2H in the
    equation of Laplace. Hence the tension is the same for all films
    thicker than [epsilon], the range of the molecular forces. For thinner
    films

    dT
    -- = 4[pi][rho]^2c[psi](c).
    dc

    Hence if [psi](c) is positive, the tension and the thickness will
    increase together. Now 2[pi]m[rho][psi](c) represents the attraction
    between a particle m and the plane surface of an infinite mass of the
    liquid, when the distance of the particle outside the surface is c.
    Now, the force between the particle and the liquid is certainly, on
    the whole, attractive; but if between any two small values of c it
    should be repulsive, then for films whose thickness lies between these
    values the tension will increase as the thickness diminishes, but for
    all other cases the tension will diminish as the thickness diminishes.

    We have given several examples in which the density is assumed to be
    uniform, because Poisson has asserted that capillary phenomena would
    not take place unless the density varied rapidly near the surface.

    In
    this assertion we think he was mathematically wrong, though in his own
    hypothesis that the density does actually vary, he was probably right.
    In fact, the quantity 4[pi][rho]^2K, which we may call with van der
    Waals the molecular pressure, is so great for most liquids (5000
    atmospheres for water), that in the parts near the surface, where the
    molecular pressure varies rapidly, we may expect considerable
    variation of density, even when we take into account the smallness of
    the compressibility of liquids.

    The pressure at any point of the liquid arises from two causes, the
    external pressure P to which the liquid is subjected, and the pressure
    arising from the mutual attraction of its molecules. If we suppose
    that the number of molecules within the range of the attraction of a
    given molecule is very large, the part of the pressure arising from
    attraction will be proportional to the square of the number of
    molecules in unit of volume, that is, to the square of the density.
    Hence we may write

    p = P + A[rho]^2,

    where A is a constant [equal to Laplace's intrinsic pressure K. But
    this equation is applicable only at points in the interior, where
    [rho] is not varying.]

    [The intrinsic pressure and the surface-tension of a uniform mass are
    perhaps more easily found by the following process. The former can be
    found at once by calculating the mutual attraction of the parts of a
    large mass which lie on opposite sides of an imaginary plane
    interface.

    If the density be [sigma], the attraction between the whole
    of one side and a layer upon the other distant z from the plane and of
    thickness dz is 2[pi][sigma]^2[psi](z)dz, reckoned per unit of area.
    The expression for the intrinsic pressure is thus simply

    / [oo]
    K = 2[pi][sigma]^2 | [psi](z)dz. (28)
    /0

    In Laplace's investigation [sigma] is supposed to be unity. We may
    call the value which (28) then assumes K0, so that as above

    / [oo]
    K0 = 2[pi] | [psi](z)dz. (29)
    /0

    The expression for the superficial tension is most readily found with
    the aid of the idea of superficial energy, introduced into the subject
    by Gauss. Since the tension is constant, the work that must be done to
    extend the surface by one unit of area measures the tension, and the
    work required for the generation of any surface is the product of the
    tension and the area. From this consideration we may derive Laplace's
    expression, as has been done by Dupre (Theorie mecanique de la
    chaleur
    , Paris, 1869), and Kelvin ("Capillary Attraction," Proc.
    Roy. Inst.
    , January 1886.

    Reprinted, Popular Lectures and
    Addresses
    , 1889). For imagine a small cavity to be formed in the
    interior of the mass and to be gradually expanded in such a shape that
    the walls consist almost entirely of two parallel planes. The distance
    between the planes is supposed to be very small compared with their
    ultimate diameters, but at the same time large enough to exceed the
    range of the attractive forces. The work required to produce this
    crevasse is twice the product of the tension and the area of one of
    the faces.

    If we now suppose the crevasse produced by direct
    separation of its walls, the work necessary must be the same as
    before, the initial and final configurations being identical; and we
    recognize that the tension may be measured by half the work that must
    be done per unit of area against the mutual attraction in order to
    separate the two portions which lie upon opposite sides of an ideal
    plane to a distance from one another which is outside the range of the
    forces. It only remains to calculate this work.

    If [sigma]1, [sigma]2 represent the densities of the two infinite
    solids, their mutual attraction at distance z is per unit of area

    / [oo]
    2[pi][sigma]1[sigma]2 | [psi](z)dz, (30)
    /z

    or 2[pi][sigma]1[sigma]2[theta](z), if we write

    / [oo]
    | [psi](z)dz = [theta](z). (31)
    /z

    The work required to produce the separation in question is thus

    / [oo]
    2[pi][sigma]1[sigma]2 | [theta](z)dz; (32)
    / 0

    and for the tension of a liquid of density [sigma] we have

    / [oo]
    T = [pi][sigma]^2 | [theta](z)dz. (33)
    /0

    The form of this expression may be modified by integration by parts.
    For

    / / d[theta](z) /
    | [theta](z)dz = [theta](z).z - | z -----------dz = [theta](z).z + | z[psi](z)dz.
    / / dz /

    Since theta(0) is finite, proportional to K, the integrated term
    vanishes at both limits, and we have simply

    / [oo] / [oo]
    | [theta](z)dz = | z[psi](z)dz, (34)
    /0 /0

    and

    / [oo]
    T = [pi][sigma]^2 | z[psi](z)dz. (35)
    /0

    In Laplace's notation the second member of (34), multiplied by 2[pi],
    is represented by H.

    As Laplace has shown, the values for K and T may also be expressed in
    terms of the function [phi], with which we started.

    Integrating by
    parts, we get

    / /
    | [psi](z)dz = z[psi](z) + (1/3)z^3[PI](z) + 1/3 | z^3[phi](z)dz,
    / /

    / /
    | z[psi](z)dz = 1/2z^2[psi](z) + (1/8)z^4[PI](z) + 1/8 | z^4 [phi](z)dz.
    / /

    In all cases to which it is necessary to have regard the integrated
    terms vanish at both limits, and we may write

    / [oo] 1 / [oo] / [oo] 1 / [oo]
    | [psi](z)dz = -- | z^3 [phi](z)dz, | z[psi](z)dz = -- | z^4 [phi](z)dz; (36)
    /0 3 /0 /0 8 /0

    so that

    2[pi] / [oo] [pi] / [oo]
    K0 = ----- | z^3[phi](z)dz, T0 = ---- | z^4 [phi](z)dz. (37)
    3 /0 8 /0

    A few examples of these formulae will promote an intelligent
    comprehension of the subject. One of the simplest suppositions open to
    us is that

    [phi](f) = e^([beta] f). (38)

    From this we obtain

    [Pi](z) = [beta]^(-1) e^([beta] z), [psi](z) = [beta]^(-3)([beta]z + 1) e^(-[beta] z), (39)

    K0 = 4[pi][beta]^(-4), T0 = 3[pi][beta]^(-5). (40)

    The range of the attractive force is mathematically infinite, but
    practically of the order [beta]^(-1), and we see that T is of higher
    order in this small quantity than K. That K is in all cases of the
    fourth order and T of the fifth order in the range of the forces is
    obvious from (37) without integration.

    An apparently simple example would be to suppose [phi](z) = z^n. We
    get

    z^(n+1) z^(n+3)
    [PI](z) = - -------, [psi](z) = ---------,
    n+1 n+3 . n+1

    2[pi]z^(n+4) |[oo]
    ## K0 = --------------- | (41)
    n+4 . n+3 . n+1 |0

    The intrinsic pressure will thus be infinite whatever n may be. If n +
    4 be positive, the attraction of infinitely distant parts contributes
    to the result; while if n + 4 be negative, the parts in immediate
    contiguity act with infinite power. For the transition case, discussed
    by William Sutherland (Phil. Mag. xxiv. p. 113, 1887), of n + 4 = 0,
    K0 is also infinite. It seems therefore that nothing satisfactory can
    be arrived at under this head.

    As a third example, we will take the law proposed by Young, viz.

    [phi](z) = 1 from z = 0 to z = a, \
    [phi](z) = 0 from z = a to z = [oo]; / (42)

    and corresponding therewith,

    [Pi](z) = a - z from z = 0 to z = a, \
    [Pi](z) = 0 from z = a to z = [oo], / (43)

    [psi](z) = 1/2a(a^2 - z^2) = 1/3(a^3 - z^3) from z = 0 to z = a, \
    [psi](z) = 0 from z = a to z = [oo], / (44)

    Equations (37) now give

    2[pi] / [oo] [pi]a^4
    K0 = ----- | z^3dz = -------, (45)
    3
    /0 6

    [pi] / a [pi]a^5
    T0 = ---- | z^4 dz = -------. (46)
    8
    /0 40

    The numerical results differ from those of Young, who finds that "the
    contractile force is one-third of the whole cohesive force of a
    stratum of particles, equal in thickness to the interval to which the
    primitive equable cohesion extends
    ," viz. T = (1/3)aK; whereas
    according to the above calculation T = (3/20)aK. The discrepancy seems
    to depend upon Young having treated the attractive force as operative
    in one direction only. For further calculations on Laplace's
    principles, see Rayleigh, Phil. Mag., Oct. Dec. 1890, or Scientific
    Papers
    , vol. iii. p. 397.]

    ON SURFACE-TENSION

    Definition.--The tension of a liquid surface across any line drawn on the surface is normal to the line, and is the same for all directions of the line, and is measured by the force across an element of the line divided by the length of that element.

    Experimental Laws of Surface-Tension.--1. For any given liquid surface, as the surface which separates water from air, or oil from water, the surface-tension is the same at every point of the surface and in every direction. It is also practically independent of the curvature of the surface, although it appears from the mathematical theory that there is a slight increase of tension where the mean curvature of the surface is concave, and a slight diminution where it is convex.

    The amount of this increase and diminution is too small to be directly measured, though it has a certain theoretical importance in the explanation of the equilibrium of the superficial layer of the liquid where it is inclined to the horizon.

    1. The surface-tension diminishes as the temperature rises, and when the

    temperature reaches that of the critical point at which the distinction between the liquid and its vapour ceases, it has been observed by Andrews that the capillary action also vanishes. The early writers on capillary action supposed that the diminution of capillary action was due simply to the change of density corresponding to the rise of temperature, and, therefore, assuming the surface-tension to vary as the square of the density, they deduced its variations from the observed dilatation of the liquid by heat. This assumption, however, does not appear to be verified by the experiments of Brunner and Wolff on the rise of water in tubes at different temperatures.

    1. The tension of the surface separating two liquids which do not mix

    cannot be deduced by any known method from the tensions of the surfaces of the liquids when separately in contact with air.

    When the surface is curved, the effect of the surface-tension is to make the pressure on the concave side exceed the pressure on the convex side by T (1/R1 + 1/R2), where T is the intensity of the surface-tension and R1, R2 are the radii of curvature of any two sections normal to the surface and to each other.

    [Illustration: FIG. 3.]

    If three fluids which do not mix are in contact with each other, the three surfaces of separation meet in a line, straight or curved. Let O (fig. 3) be a point in this line, and let the plane of the paper be supposed to be normal to the line at the point O. The three angles between the tangent planes to the three surfaces of separation at the point O are completely determined by the tensions of the three surfaces.

    For if in the triangle abc the side ab is taken so as to represent on a given scale the tension of the surface of contact of the fluids a and b, and if the other sides bc and ca are taken so as to represent on the same scale the tensions of the surfaces between b and c and between c and a respectively, then the condition of equilibrium at O for the corresponding tensions R, P and Q is that the angle ROP shall be the supplement of abc, POQ of bca, and, therefore, QOR of cab. Thus the angles at which the surfaces of separation meet are the same at all parts of the line of concourse of the three fluids.

    When three films of the same liquid meet, their tensions are equal, and, therefore, they make angles of 120 deg. with each other. The froth of soap-suds or beaten-up eggs consists of a multitude of small films which meet each other at angles of 120 deg.

    If four fluids, a, b, c, d, meet in a point O, and if a tetrahedron ABCD is formed so that its edge AB represents the tension of the surface of contact of the liquids a and b, BC that of b and c, and so on; then if we place this tetrahedron so that the face ABC is normal to the tangent at O to the line of concourse of the fluids abc, and turn it so that the edge AB is normal to the tangent plane at O to the surface of contact of the fluids a and b, then the other three faces of the tetrahedron will be normal to the tangents at O to the other three lines of concourse of the liquids, and the other five edges of the tetrahedron will be normal to the tangent planes at O to the other five surfaces of contact.

    If six films of the same liquid meet in a point the corresponding tetrahedron is a regular tetrahedron, and each film, where it meets the others, has an angle whose cosine is -1/3. Hence if we take two nets of wire with hexagonal meshes, and place one on the other so that the point of concourse of three hexagons of one net coincides with the middle of a hexagon of the other, and if we then, after dipping them in Plateau's liquid, place them horizontally, and gently raise the upper one, we shall develop a system of plane laminae arranged as the walls and floors of the cells are arranged in a honeycomb.

    We must not, however, raise the upper net too much, or the system of films will become unstable.

    When a drop of one liquid, B, is placed on the surface of another, A, the phenomena which take place depend on the relative magnitude of the three surface-tensions corresponding to the surface between A and air, between B and air, and between A and B. If no one of these tensions is greater than the sum of the other two, the drop will assume the form of a lens, the angles which the upper and lower surfaces of the lens make with the free surface of A and with each other being equal to the external angles of the triangle of forces.

    Such lenses are often seen formed by drops of fat floating on the surface of hot water, soup or gravy. But when the surface-tension of A exceeds the sum of the tensions of the surfaces of contact of B with air and with A, it is impossible to construct the triangle of forces; so that equilibrium becomes impossible. The edge of the drop is drawn out by the surface-tension of A with a force greater than the sum of the tensions of the two surfaces of the drop.

    The drop, therefore, spreads itself out, with great velocity, over the surface of A till it covers an enormous area, and is reduced to such extreme tenuity that it is not probable that it retains the same properties of surface-tension which it has in a large mass.

    Thus a drop of train oil will spread itself over the surface of the sea till it shows the colours of thin plates. These rapidly descend in Newton's scale and at last disappear, showing that the thickness of the film is less than the tenth part of the length of a wave of light. But even when thus attenuated, the film may be proved to be present, since the surface-tension of the liquid is considerably less than that of pure water. This may be shown by placing another drop of oil on the surface.

    This drop will not spread out like the first drop, but will take the form of a flat lens with a distinct circular edge, showing that the surface-tension of what is still apparently pure water is now less than the sum of the tensions of the surfaces separating oil from air and water.

    The spreading of drops on the surface of a liquid has formed the subject of a very extensive series of experiments by Charles Tomlinson; van der Mensbrugghe has also written a very complete memoir on this subject (Sur la tension superficielle des liquides, Bruxelles, 1873).

    When a solid body is in contact with two fluids, the surface of the solid cannot alter its form, but the angle at which the surface of contact of the two fluids meets the surface of the solid depends on the values of the three surface-tensions. If a and b are the two fluids and c the solid then the equilibrium of the tensions at the point O depends only on that of thin components parallel to the surface, because the surface-tensions normal to the surface are balanced by the resistance of the solid. Hence if the angle ROQ (fig. 4) at which the surface of contact OP meets the solid is denoted by [alpha],

    T_(bc) - T_(ca) - T_(ab) cos[alpha] = 0,

    Whence

    cos[alpha] = (T_(bc) - T_(ca))/T_(ab).

    As an experiment on the angle of contact only gives us the difference of the surface-tensions at the solid surface, we cannot determine their actual value. It is theoretically probable that they are often negative, and may be called surface-pressures.

    [Illustration: FIG. 4. ]

    The constancy of the angle of contact between the surface of a fluid and a solid was first pointed out by Dr Young, who states that the angle of contact between mercury and glass is about 140 deg. Quincke makes it 128 deg. 52'.

    If the tension of the surface between the solid and one of the fluids exceeds the sum of the other two tensions, the point of contact will not be in equilibrium, but will be dragged towards the side on which the tension is greatest. If the quantity of the first fluid is small it will stand in a drop on the surface of the solid without wetting it. If the quantity of the second fluid is small it will spread itself over the surface and wet the solid. The angle of contact of the first fluid is 180 deg. and that of the second is zero.

    If a drop of alcohol be made to touch one side of a drop of oil on a glass plate, the alcohol will appear to chase the oil over the plate, and if a drop of water and a drop of bisulphide of carbon be placed in contact in a horizontal capillary tube, the bisulphide of carbon will chase the water along the tube. In both cases the liquids move in the direction in which the surface-pressure at the solid is least.

    [In order to express the dependence of the tension at the interface of two bodies in terms of the forces exercised by the bodies upon themselves and upon one another, we cannot do better than follow the method of Dupre. If T12 denote the interfacial tension, the energy corresponding to unit of area of the interface is also T12, as we see by considering the introduction (through a fine tube) of one body into the interior of the other. A comparison with another method of generating the interface, similar to that previously employed when but one body was in question, will now allow us to evaluate T12.

    The work required to cleave asunder the parts of the first fluid which lie on the two sides of an ideal plane passing through the interior, is per unit of area 2T1, and the free surface produced is two units in area. So for the second fluid the corresponding work is 2T2. This having been effected, let us now suppose that each of the units of area of free surface of fluid (1) is allowed to approach normally a unit area of (2) until contact is established. In this process work is gained which we may denote by 4T'12, 2T'12 for each pair.

    On the whole, then, the work expended in producing two units of interface is 2T1 + 2T2 - 4T'12, and this, as we have seen, may be equated to 2T12. Hence

    T12 = T1 + T2 - 2T'12 (47)

    If the two bodies are similar,

    T1 = T2 = T'12;

    and T12 = 0, as it should do.

    Laplace does not treat systematically the question of interfacial tension, but he gives incidentally in terms of his quantity H a relation analogous to (47).

    If 2T'12 > T1 + T2, T12 would be negative, so that the interface would of itself tend to increase. In this case the fluids must mix.

    Conversely, if two fluids mix, it would seem that T'12 must exceed the mean of T1 and T2; otherwise work would have to be expended to effect a close alternate stratification of the two bodies, such as we may suppose to constitute a first step in the process of mixture (Dupre, Theorie mecanique de la chaleur, p. 372; Kelvin, Popular Lectures, p. 53).

    The value of T'12 has already been calculated (32). We may write


    / [oo]
    T'12 = [pi][sigma]1[sigma]2 | [theta](z)dz =
    /0

    1 / [oo]
    = -- [pi][sigma]1[sigma]2 | z^4 [phi](z)dz; (48)
    8
    /0

    and in general the functions [theta], or [phi], must be regarded as capable of assuming different forms. Under these circumstances there is no limitation upon the values of the interfacial tensions for three fluids, which we may denote by T12, T23, T31. If the three fluids can remain in contact with one another, the sum of any two of the quantities must exceed the third, and by Neumann's rule the directions of the interfaces at the common edge must be parallel to the sides of a triangle, taken proportional to T12, T23, T31.

    If the above-mentioned condition be not satisfied, the triangle is imaginary, and the three fluids cannot rest in contact, the two weaker tensions, even if acting in full concert, being incapable of balancing the strongest. For instance, if T31 > T12 + T23, the second fluid spreads itself indefinitely upon the interface of the first and third fluids.

    [Illustration: FIG. 5.]

    ## /| T23
    /
    3 /
    <----------* 2
    ## T31 1 \
    \
    ##
    \| T12

    The experimenters who have dealt with this question, C.G.M. Marangoni, van der Mensbrugghe, Quincke, have all arrived at results inconsistent with the reality of Neumann's triangle. Thus Marangoni says (Pogg.

    Annalen, cxliii. p. 348, 1871):--"Die gemeinschaftliche Oberflache zweier Flussigkeiten hat eine geringere Oberflachenspannung als die Differenz der Oberflachenspannung der Flussigkeiten selbst (mit Ausnahme des Quecksilbers)." Three pure bodies (of which one may be air) cannot accordingly remain in contact. If a drop of oil stands in lenticular form upon a surface of water, it is because the water-surface is already contaminated with a greasy film.

    On the theoretical side the question is open until we introduce some limitation upon the generality of the functions. By far the simplest supposition open to us is that the functions are the same in all cases, the attractions differing merely by coefficients analogous to densities in the theory of gravitation. This hypothesis was suggested by Laplace, and may conveniently be named after him. It was also tacitly adopted by Young, in connexion with the still more special hypothesis which Young probably had in view, namely that the force in each case was constant within a limited range, the same in all cases, and vanished outside that range.

    As an immediate consequence of this hypothesis we have from (28)

    K = K0[sigma]^2, (49)

    T = T0[sigma]^2, (50)

    where K0, T0 are the same for all bodies.

    But the most interesting results are those which Young (Works, vol. i. p. 463) deduced relative to the interfacial tensions of three bodies. By (37), (48),

    T'12 = [sigma]1[sigma]2T0; (51)

    so that by (47), (50),

    T12 = ([sigma]1 - [sigma]2)^2 T0 (52)

    According to (52), the interfacial tension between any two bodies is proportional to the square of the difference of their densities. The densities [sigma]1, [sigma]2, [sigma]3 being in descending order of magnitude, we may write

    T31 = ([sigma]1 - [sigma]2 + [sigma]2 - [sigma]3)^2 T0

    = T12 + T23 + 2([sigma]1 - [sigma]2)([sigma]2 - [sigma]3) T0;

    so that T31 necessarily exceeds the sum of the other two interfacial tensions. We are thus led to the important conclusion that according to this hypothesis Neumann's triangle is necessarily imaginary, that one of three fluids will always spread upon the interface of the other two.

    Another point of importance may be easily illustrated by this theory, viz. the dependency of capillarity upon abruptness of transition. "The reason why the capillary force should disappear when the transition between two liquids is sufficiently gradual will now be evident. Suppose that the transition from 0 to [sigma] is made in two equal steps, the thickness of the intermediate layer of density 1/2[sigma] being large compared to the range of the molecular forces, but small in comparison with the radius of curvature.

    At each step the difference of capillary pressure is only one-quarter of that due to the sudden transition from 0 to [sigma], and thus altogether half the effect is lost by the interposition of the layer. If there were three equal steps, the effect would be reduced to one-third, and so on. When the number of steps is infinite, the capillary pressure disappears altogether." ("Laplace's Theory of Capillarity," Rayleigh, Phil. Mag., 1883, p. 315.)

    According to Laplace's hypothesis the whole energy of any number of contiguous strata of liquids is least when they are arranged in order of density, so that this is the disposition favoured by the attractive forces. The problem is to make the sum of the interfacial tensions a minimum, each tension being proportional to the square of the difference of densities of the two contiguous liquids in question. If the order of stratification differ from that of densities, we can show that each step of approximation to this order lowers the sum of tensions. To this end consider the effect of the abolition of a stratum [sigma]_(n+1), contiguous to [sigma]n and [sigma](n+2).

    Before the change we have ([sigma]n - [sigma](n+1))^2 + ([sigma](n+1) - [sigma]_(n+2))^2, and afterwards ([sigma]n - [sigma](n+2))^2. The second minus the first, or the increase in the sum of tensions, is thus

    2([sigma]n - [sigma](n+1))([sigma](n+1) - [sigma](n+2)).

    Hence, if [sigma]_(n+1) be intermediate in magnitude between [sigma]n and [sigma](n+2), the sum of tensions is increased by the abolition of the stratum; but, if [sigma]_(n+1) be not intermediate, the sum is decreased. We see, then, that the removal of a stratum from between neighbours where it is out of order and its introduction between neighbours where it will be in order is doubly favourable to the reduction of the sum of tensions; and since by a succession of such steps we may arrive at the order of magnitude throughout, we conclude that this is the disposition of minimum tensions and energy.

    So far the results of Laplace's hypothesis are in marked accordance with experiment; but if we follow it out further, discordances begin to manifest themselves. According to (52) ____ ____ ____

    \/ T31 = \/ T12 + \/ T23, (53)

    a relation not verified by experiment. What is more, (52) shows that according to the hypothesis T12 is necessarily positive; so that, if the preceding argument be correct, no such thing as mixture of two liquids could ever take place.

    There are two apparent exceptions to Marangoni's rule which call for a word of explanation. According to the rule, water, which has the lower surface-tension, should spread upon the surface of mercury; whereas the universal experience of the laboratory is that drops of water standing upon mercury retain their compact form without the least tendency to spread. To Quincke belongs the credit of dissipating the apparent exception. He found that mercury specially prepared behaves quite differently from ordinary mercury, and that a drop of water deposited thereon spreads over the entire surface.

    The ordinary behaviour is evidently the result of a film of grease, which adheres with great obstinacy.

    The process described by Quincke is somewhat elaborate; but there is little difficulty in repeating the experiment if the mistake be avoided of using a free surface already contaminated, as almost inevitably happens when the mercury is poured from an ordinary bottle. The mercury should be drawn from underneath, for which purpose an arrangement similar to a chemical wash bottle is suitable, and it may be poured into watch-glasses, previously dipped into strong sulphuric acid, rinsed in distilled water, and dried over a Bunsen flame. When the glasses are cool, they may be charged with mercury, of which the first part is rejected.

    Operating in this way there is no difficulty in obtaining surfaces upon which a drop of water spreads, although from causes that cannot always be traced, a certain proportion of failures is met with.

    As might be expected, the grease which produces these effects is largely volatile. In many cases a very moderate preliminary warming of the watch-glasses makes all the difference in the behaviour of the drop.

    The behaviour of a drop of carbon bisulphide placed upon clean water is also, at first sight, an exception to Marangoni's rule. So far from spreading over the surface, as according to its lower surface-tension it ought to do, it remains suspended in the form of a lens. Any dust that may be lying upon the surface is not driven away to the edge of the drop, as would happen in the case of oil. A simple modification of the experiment suffices, however, to clear up the difficulty.

    If after the deposition of the drop, a little lycopodium be scattered over the surface, it is seen that a circular space surrounding the drop, of about the size of a shilling, remains bare, and this, however often the dusting be repeated, so long as any of the carbon bisulphide remains.

    The interpretation can hardly be doubtful. The carbon bisulphide is really spreading all the while, but on account of its volatility is unable to reach any considerable distance. Immediately surrounding the drop there is a film moving outwards at a high speed, and this carries away almost instantaneously any dust that may fall upon it. The phenomenon above described requires that the water-surface be clean. If a very little grease be present, there is no outward flow and dust remains undisturbed in the immediate neighbourhood of the drop.]

    [Illustration: FIG. 6.]

    On the Rise of a Liquid in a Tube.--Let a tube (fig. 6) whose internal radius is r, made of a solid substance c, be dipped into a liquid a. Let us suppose that the angle of contact for this liquid with the solid c is an acute angle. This implies that the tension of the free surface of the solid c is greater than that of the surface of contact of the solid with the liquid a. Now consider the tension of the free surface of the liquid a. All round its edge there is a tension T acting at an angle a with the vertical.

    The circumference of the edge is 2[pi]r, so that the resultant of this tension is a force 2[pi]rT cos[alpha] acting vertically upwards on the liquid. Hence the liquid will rise in the tube till the weight of the vertical column between the free surface and the level of the liquid in the vessel balances the resultant of the surface-tension.

    The upper surface of this column is not level, so that the height of the column cannot be directly measured, but let us assume that h is the mean height of the column, that is to say, the height of a column of equal weight, but with a flat top. Then if r is the radius of the tube at the top of the column, the volume of the suspended column is [pi]r^2h, and its weight is [pi][rho]gr^2h, when [rho] is its density and g the intensity of gravity. Equating this force with the resultant of the tension

    [pi][rho]gr^2h = 2[pi]rT cos[alpha],

    or

    h = 2T cos ([alpha]/[rho]gr).

    Hence the mean height to which the fluid rises is inversely as the radius of the tube. For water in a clean glass tube the angle of contact is zero, and

    h = 2T/[rho]gr.

    For mercury in a glass tube the angle of contact is 128 deg. 52', the cosine of which is negative. Hence when a glass tube is dipped into a vessel of mercury, the mercury within the tube stands at a lower level than outside it.

    Rise of a Liquid between Two Plates.--When two parallel plates are placed vertically in a liquid the liquid rises between them. If we now suppose fig. 6 to represent a vertical section perpendicular to the plates, we may calculate the rise of the liquid. Let l be the breadth of the plates measured perpendicularly to the plane of the paper, then the length of the line which bounds the wet and the dry parts of the plates inside is l for each surface, and on this the tension T acts at an angle [alpha] to the vertical. Hence the resultant of the surface-tension is 2lT cos[alpha].

    If the distance between the inner surfaces of the plates is a, and if the mean height of the film of fluid which rises between them is h, the weight of fluid raised is [rho]ghla. Equating the forces--

    [rho]ghla = 2lT cos[alpha],

    whence

    h = 2T cos ([alpha]/[rho]ga).

    This expression is the same as that for the rise of a liquid in a tube, except that instead of r, the radius of the tube, we have a the distance of the plates.

    Form of the Capillary Surface.--The form of the surface of a liquid acted on by gravity is easily determined if we assume that near the part considered the line of contact of the surface of the liquid with that of the solid bounding it is straight and horizontal, as it is when the solids which constrain the liquid are bounded by surfaces formed by horizontal and parallel generating lines. This will be the case, for instance, near a flat plate dipped into the liquid.

    If we suppose these generating lines to be normal to the plane of the paper, then all sections of the solids parallel to this plane will be equal and similar to each other, and the section of the surface of the liquid will be of the same form for all such sections.

    [Illustration: FIG. 7.]

    Let us consider the portion of the liquid between two parallel sections distant one unit of length. Let P1, P2 (fig. 7) be two points of the surface; [theta]1, [theta]2 the inclination of the surface to the horizon at P1 and P2; y1, y2 the heights of P1 and P2 above the level of the liquid at a distance from all solid bodies. The pressure at any point of the liquid which is above this level is negative unless another fluid as, for instance, the air, presses on the upper surface, but it is only the difference of pressures with which we have to do, because two equal pressures on opposite sides of the surface produce no effect.

    We may, therefore, write for the pressure at a height y

    p = -[rho]gy,

    where [rho] is the density of the liquid, or if there are two fluids the excess of the density of the lower fluid over that of the upper one.

    The forces acting on the portion of liquid P1P2A2A1 are--first, the horizontal pressures, -1/2[rho]g y1^2 and 1/2[rho]g y2^2; second, the surface-tension T acting at P1 and P2 in directions inclined [theta]1 and [theta]2 to the horizon. Resolving horizontally we find--

    T(cos[theta]2 - cos[theta]1) + 1/2g[rho](y2^2 - y1^2) = 0,

    whence

    g[rho]y1^2 g[rho]y2^2
    cos[theta]2 = cos[theta]1 + ---------- - ----------,
    ## 2T 2T

    or if we suppose P1 fixed and P2 variable, we may write

    cos[theta] = constant - 1/2g[rho]y^2/T.

    This equation gives a relation between the inclination of the curve to the horizon and the height above the level of the liquid.

    [Illustration: FIG. 8.]

    Resolving vertically we find that the weight of the liquid raised above the level must be equal to T(sin[theta]2 - sin[theta]1), and this is therefore equal to the area P1P2A2A1 multiplied by g[rho]. The form of the capillary surface is identical with that of the "elastic curve," or the curve formed by a uniform spring originally straight, when its ends are acted on by equal and opposite forces applied either to the ends themselves or to solid pieces attached to them. Drawings of the different forms of the curve may be found in Thomson and Tait's Natural Philosophy, vol. i. p. 455.

    We shall next consider the rise of a liquid between two plates of different materials for which the angles of contact are [alpha]1 and [alpha]2, the distance between the plates being a, a small quantity.

    Since the plates are very near one another we may use the following equation of the surface as an approximation:--

    y = h1 + Ax + Bx^2, h2 = h1 + Aa + Ba^2,

    whence

    cot[alpha]1 = -A, cot[alpha]2 = A + 2Ba

    T(cos[alpha]1 + cos[alpha]2) = [rho]ga(h1 + 1/2Aa + (1/3)Ba^2),

    whence we obtain

    T / \ a / \
    h1 = ------- ( cos[alpha]1 + cos[alpha]2 ) + --( 2cot[alpha]1 - cot[alpha]2 )
    [rho]ga \ / 6 \ /

    T / \ a / \
    h2 = ------- ( cos[alpha]1 + cos[alpha]2 ) + --( 2cot[alpha]2 - cot[alpha]1 ).
    [rho]ga \ / 6 \ /

    Let X be the force which must be applied in a horizontal direction to either plate to keep it from approaching the other, then the forces acting on the first plate are T + X in the negative direction, and T sin [alpha]1 + 1/2g[rho]h1^2 in the positive direction. Hence

    X = 1/2g[rho]h1^2 - T(1 - sin[alpha]1).

    For the second plate

    X = 1/2g[rho]h2^2 - T (1 - sin[alpha]2).

    Hence

    X = 1/4g[rho](h1^2 + h2^2) - T{1 - 1/2(sin[alpha]1 + sin[alpha]2)},

    or, substituting the values of h1 and h2,

    1 T^2

    X = -- --------- (cos[alpha]1 + cos [alpha]2)^2
    2 [rho]ga^2

    • T {1 - 1/2(sin [alpha]1 + sin[alpha]2)
    • (1/12)(cos[alpha]1 + cos[alpha]2)(cot[alpha]1 + cot[alpha]2)},

    the remaining terms being negligible when a is small. The force, therefore, with which the two plates are drawn together consists first of a positive part, or in other words an attraction, varying inversely as the square of the distance, and second, of a negative part of repulsion independent of the distance.

    Hence in all cases except that in which the angles [alpha]1 and [alpha]2 are supplementary to each other, the force is attractive when [alpha] is small enough, but when cos[alpha]1 and cos[alpha]2 are of different signs, as when the liquid is raised by one plate, and depressed by the other, the first term may be so small that the repulsion indicated by the second term comes into play.

    The fact that a pair of plates which repel one another at a certain distance may attract one another at a smaller distance was deduced by Laplace from theory, and verified by the observations of the abbe Hauy.

    A Drop between Two Plates.--If a small quantity of a liquid which wets glass be introduced between two glass plates slightly inclined to each other, it will run towards that part where the glass plates are nearest together. When the liquid is in equilibrium it forms a thin film, the outer edge of which is all of the same thickness. If d is the distance between the plates at the edge of the film and [PI] the atmospheric pressure, the pressure of the liquid in the film is [Pi] - (2T cos[alpha])/d, and if A is the area of the film between the plates and B its circumference, the plates will be pressed together with a force

    2AT cos[alpha]
    ------------- + BT sin[alpha],
    d

    and this, whether the atmosphere exerts any pressure or not. The force thus produced by the introduction of a drop of water between two plates is enormous, and is often sufficient to press certain parts of the plates together so powerfully as to bruise them or break them. When two blocks of ice are placed loosely together so that the superfluous water which melts from them may drain away, the remaining water draws the blocks together with a force sufficient to cause the blocks to adhere by the process called Regelation.

    [An effect of an opposite character may be observed when the fluid is mercury in place of water. When two pieces of flat glass are pressed together under mercury with moderate force they cohere, the mercury leaving the narrow crevasses, even although the alternative is a vacuum.

    The course of events is more easily followed if one of the pieces of glass constitutes the bottom, or a side, of the vessel containing the mercury.]

    In many experiments bodies are floated on the surface of water in order that they may be free to move under the action of slight horizontal forces. Thus Sir Isaac Newton placed a magnet in a floating vessel and a piece of iron in another in order to observe their mutual action, and A.M. Ampere floated a voltaic battery with a coil of wire in its circuit in order to observe the effects of the earth's magnetism on the electric circuit. When such floating bodies come near the edge of the vessel they are drawn up to it, and are apt to stick fast to it.

    There are two ways of avoiding this inconvenience. One is to grease the float round its water-line so that the water is depressed round it. This, however, often produces a worse disturbing effect, because a thin film of grease spreads over the water and increases its surface-viscosity. The other method is to fill the vessel with water till the level of the water stands a little higher than the rim of the vessel. The float will then be repelled from the edge of the vessel.

    Such floats, however, should always be made so that the section taken at the level of the water is as small as possible.

    [The Size of Drops.--The relation between the diameter of a tube and the weight of the drop which it delivers appears to have been first investigated by Thomas Tate (Phil. Mag. vol. xxvii. p. 176, 1864), whose experiments led him to the conclusion that "other things being the same, the weight of a drop of liquid is proportional to the diameter of the tube in which it is formed." Sufficient time must of course be allowed for the formation of the drops; otherwise no simple results can be expected. In Tate's experiments the period was never less than 40 seconds.

    The magnitude of a drop delivered from a tube, even when the formation up to the phase of instability is infinitely slow, cannot be calculated a priori. The weight is sometimes equated to the product of the capillary tension (T) and the circumference of the tube (2[pi]a), but with little justification.

    Even if the tension at the circumference of the tube acted vertically, and the whole of the liquid below this level passed into the drop, the calculation would still be vitiated by the assumption that the internal pressure at the level in question is atmospheric. It would be necessary to consider the curvatures of the fluid surface at the edge of attachment.

    If the surface could be treated as a cylindrical prolongation of the tube (radius a), the pressure would be T/a, and the resulting force acting downwards upon the drop would amount to one-half ([pi]aT) of the direct upward pull of the tension along the circumference. At this rate the drop would be but one-half of that above reckoned. But the truth is that a complete solution of the statical problem for all forms up to that at which instability sets in, would not suffice for the present purpose.

    The detachment of the drop is a dynamical effect, and it is influenced by collateral circumstances.

    For example, the bore of the tube is no longer a matter of indifference, even though the attachment of the drop occurs entirely at the outer edge. It appears that when the external diameter exceeds a certain value, the weight of a drop of water is sensibly different in the two extreme cases of a very small and of a very large bore.

    But although a complete solution of the dynamical problem is impracticable, much interesting information may be obtained from the principle of dynamical similarity. The argument has already been applied by Dupre (Theorie mecanique de la chaleur, Paris, 1869, p. 328), but his presentation of it is rather obscure. We will assume that when, as in most cases, viscosity may be neglected, the mass (M) of a drop depends only upon the density ([sigma]), the capillary tension (T), the acceleration of gravity (g), and the linear dimension of the tube (a).

    In order to justify this assumption, the formation of the drop must be sufficiently slow, and certain restrictions must be imposed upon the shape of the tube. For example, in the case of water delivered from a glass tube, which is cut off square and held vertically, a will be the external radius; and it will be necessary to suppose that the ratio of the internal radius to a is constant, the cases of a ratio infinitely small, or infinitely near unity, being included. But if the fluid be mercury, the flat end of the tube remains unwetted, and the formation of the drop depends upon the internal diameter only.

    The "dimensions" of the quantities on which M depends are:--

    [sigma] = (Mass)^1 (Length)^(-3),
    T = (Force)^1 (Length)^(-1) = (Mass)^1 (Time)^(-2),
    g = Acceleration = (Length)^1 (Time)^(-2),

    of which M, a mass, is to be expressed as a function. If we assume

    M [approximately equals] T^{x}.g^{y}.[sigma]^{z}.a^{u},

    we have, considering in turn length, time and mass,

    y - 3z + u = 0, 2x + 2y = 0, x + z = 1;

    so that

    y = -x, z = 1 - x, u = 3 - 2x.

    Accordingly

    Ta / T \x-1
    M ~ --- ( ----------- ).
    g \g[sigma]a^2/

    Since x is undetermined, all that we can conclude is that M is of the form

    Ta / T \
    ## M = ---.F( ----------- ), (1)
    g \g[sigma]a^2/

    where F denotes an arbitrary function.

    Dynamical similarity requires that T/g[sigma]a^2 be constant; or, if g be supposed to be so, that a^2 varies as T/[sigma]. If this condition be satisfied, the mass (or weight) of the drop is proportional to T and to a.

    If Tate's law be true, that ceteris paribus M varies as a, it follows from (1) that F is constant. For all fluids and for all similar tubes similarly wetted, the weight of a drop would then be proportional not only to the diameter of the tube, but also to the superficial tension, and it would be independent of the density.

    Careful observations with special precautions to ensure the cleanliness of the water have shown that over a considerable range, the departure from Tate's law is not great. The results give material for the determination of the function F in (1).

    +----------------+------------+
    | T/(9[sigma]a^2)| gM/Ta |
    +----------------+------------+
    | 2.58 | 4.13 |
    | 1.16 | 3.97 |
    | 0.708 | 3.80 |
    | 0.441 | 3.73 |
    | 0.277 | 3.78 |
    | 0.220 | 3.90 |
    | 0.169 | 4.06 |
    +----------------+------------+

    In the preceding table, applicable to thin-walled tubes, the first column gives the values of T/g[sigma]a^2, and the second column those of gM/Ta, all the quantities concerned being in C.G.S. measure, or other consistent system. From this the weight of a drop of any liquid of which the density and surface tension are known, can be calculated. For many purposes it may suffice to treat F as a constant, say 3.8. The formula for the weight of a drop is then simply

    Mg = 3.8Ta, (2)

    in which 3.8 replaces the 2[pi] of the faulty theory alluded to earlier (see Rayleigh, Phil. Mag., Oct. 1899).]

    Phenomena arising from the Variation of the Surface-tension.--Pure water has a higher surface-tension than that of any other substance liquid at ordinary temperatures except mercury. Hence any other liquid if mixed with water diminishes its surface-tension. For example, if a drop of alcohol be placed on the surface of water, the surface-tension will be diminished from 80, the value for pure water, to 25, the value for pure alcohol.

    The surface of the liquid will therefore no longer be in equilibrium, and a current will be formed at and near the surface from the alcohol to the surrounding water, and this current will go on as long as there is more alcohol at one part of the surface than at another. If the vessel is deep, these currents will be balanced by counter currents below them, but if the depth of the water is only two or three millimetres, the surface-current will sweep away the whole of the water, leaving a dry spot where the alcohol was dropped in.

    This phenomenon was first described and explained by James Thomson, who also explained a phenomenon, the converse of this, called the "tears of strong wine."

    If a wine-glass be half-filled with port wine the liquid rises a little up the side of the glass as other liquids do. The wine, however, contains alcohol and water, both of which evaporate, but the alcohol faster than the water, so that the superficial layer becomes more watery. In the middle of the vessel the superficial layer recovers its strength by diffusion from below, but the film adhering to the side of the glass becomes more watery, and therefore has a higher surface-tension than the surface of the stronger wine.

    It therefore creeps up the side of the glass dragging the strong wine after it, and this goes on till the quantity of fluid dragged up collects into a drop and runs down the side of the glass.

    The motion of small pieces of camphor floating on water arises from the gradual solution of the camphor. If this takes place more rapidly on one side of the piece of camphor than on the other side, the surface-tension becomes weaker where there is most camphor in solution, and the lump, being pulled unequally by the surface-tensions, moves off in the direction of the strongest tension, namely, towards the side on which least camphor is dissolved.

    If a drop of ether is held near the surface of water the vapour of ether condenses on the surface of the water, and surface-currents are formed flowing in every direction away from under the drop of ether.

    If we place a small floating body in a shallow vessel of water and wet one side of it with alcohol or ether, it will move off with great velocity and skim about on the surface of the water, the part wet with alcohol being always the stern.

    The surface-tension of mercury is greatly altered by slight changes in the state of the surface. The surface-tension of pure mercury is so great that it is very difficult to keep it clean, for every kind of oil or grease spreads over it at once.

    But the most remarkable effects of change of surface-tension are those produced by what is called the electric polarization of the surface. The tension of the surface of contact of mercury and dilute sulphuric acid depends on the electromotive force acting between the mercury and the acid. If the electromotive force is from the acid to the mercury the surface-tension increases; if it is from the mercury to the acid, it diminishes. Faraday observed that a large drop of mercury, resting on the flat bottom of a vessel containing dilute acid, changes its form in a remarkable way when connected with one of the electrodes of a battery, the other electrode being placed in the acid.

    When the mercury is made positive it becomes dull and spreads itself out; when it is made negative it gathers itself together and becomes bright again. G.

    Lippmann, who has made a careful investigation of the subject, finds that exceedingly small variations of the electromotive force produce sensible changes in the surface-tension. The effect of one of a Daniell's cell is to increase the tension from 30.4 to 40.6. He has constructed a capillary electrometer by which differences of electric potential less than 0.01 of that of a Daniell's cell can be detected by the difference of the pressure required to force the mercury to a given point of a fine capillary tube.

    He has also constructed an apparatus in which this variation in the surface-tension is made to do work and drive a machine. He has also found that this action is reversible, for when the area of the surface of contact of the acid and mercury is made to increase, an electric current passes from the mercury to the acid, the amount of electricity which passes while the surface increases by one square centimetre being sufficient to decompose .000013 gramme of water.

    [The movements of camphor scrapings referred to above afford a useful test of the condition of a water surface. If the contamination exceed a certain limit, the scrapings remain quite dead. In a striking form of the experiment, the water is contained, to the depth of perhaps one inch, in a large flat dish, and the operative part of the surface is limited by a flexible hoop of thin sheet brass lying in the dish and rising above the water-level.

    If the hoop enclose an area of (say) one-third of the maximum, and if the water be clean, camphor fragments floating on the interior enter with vigorous movements. A touch of the finger will then often reduce them to quiet; but if the hoop be expanded, the included grease is so far attenuated as to lose its effect. Another method of removing grease is to immerse and remove strips of paper by which the surface available for the contamination is in effect increased.

    The thickness of the film of oil adequate to check the camphor movements can be determined with fair accuracy by depositing a weighed amount of oil (such as .8 mg.) upon the surface of water in a large bath.

    Calculated as if the density were the same as in a normal state, the thickness of the film is found to be about two millionths of a millimetre.

    Small as is the above amount of oil, the camphor test is a comparatively coarse one. Conditions of a contaminated surface may easily be distinguished, upon all of which camphor fragments spin vigorously.

    Thus, a shallow tin vessel, such as the lid of a biscuit box, may be levelled and filled with tap-water through a rubber hose. Upon the surface of the water a little sulphur is dusted. An application of the finger for 20 or 30 seconds to the under surface of the vessel will then generate enough heat to lower appreciably the surface-tension, as is evidenced by the opening out of the dust and the formation of a bare spot perhaps 1-1/2 in. in diameter. When, however, the surface is but very slightly greased, a spot can no longer be cleared by the warmth of the finger, or even of a spirit lamp, held underneath.

    And yet the greasing may be so slight that camphor fragments move with apparently unabated vigour.

    The varying degrees of contamination to which a water surface is subject are the cause of many curious phenomena. Among these is the superficial viscosity of Plateau. In his experiments a long compass needle is mounted so as to swing in the surface of the liquid under investigation.

    The cases of ordinary clean water and alcohol are strongly contrasted, the motion of the needle upon the former being comparatively sluggish.

    Moreover, a different behaviour is observed when the surfaces are slightly dusted over. In the case of water the whole of the surface in front of the needle moves with it, while on the other hand the dust floating on alcohol is scarcely disturbed until the needle actually strikes it. Plateau attributed these differences to a special quality of the liquids, named by him "superficial viscosity." It has been proved, however, that the question is one of contamination, and that a water surface may be prepared so as to behave in the same manner as alcohol.

    Another consequence of the tendency of a moderate contamination to distribute itself uniformly is the calming effect of oil, investigated by B. Franklin. On pure water the propagation of waves would be attended by temporary extensions and contractions of the surface, but these, as was shown by O. Reynolds, are resisted when the surface is contaminated.

    Indeed the possibility of the continued existence of films, such as constitute foam, depends upon the properties now under consideration.

    If, as is sometimes stated, the tension of a vertical film were absolutely the same throughout, the middle parts would of necessity fall with the acceleration of gravity. In reality, the tension adjusts itself automatically to the weight to be supported at the various levels.

    Although throughout a certain range the surface-tension varies rapidly with the degree of contamination, it is remarkable that, as was first fully indicated by Miss Pockels, the earlier stages of contamination have little or no effect upon surface-tension. Lord Rayleigh has shown that the fall of surface-tension begins when the quantity of oil is about the half of that required to stop the camphor movements, and he suggests that this stage may correspond with a complete coating of the surface with a single layer of molecules.]

    Spherical soap-bubble.

    On the Forms of Liquid Films which are Figures of Revolution.--A soap bubble is simply a small quantity of soap-suds spread out so as to expose a large surface to the air. The bubble, in fact, has two surfaces, an outer and an inner surface, both exposed to air. It has, therefore, a certain amount of surface-energy depending on the area of these two surfaces. Since in the case of thin films the outer and inner surfaces are approximately equal, we shall consider the area of the film as representing either of them, and shall use the symbol T to denote the energy of unit of area of the film, both surfaces being taken together.

    If T' is the energy of a single surface of the liquid, T the energy of the film is 2T'. When by means of a tube we blow air into the inside of the bubble we increase its volume and therefore its surface, and at the same time we do work in forcing air into it, and thus increase the energy of the bubble.

    That the bubble has energy may be shown by leaving the end of the tube open. The bubble will contract, forcing the air out, and the current of air blown through the tube may be made to deflect the flame of a candle.

    If the bubble is in the form of a sphere of radius r this material surface will have an area

    S = 4[pi]r^2 (1)

    If T be the energy corresponding to unit of area of the film the surface-energy of the whole bubble will be

    ST = 4[pi]r^2T (2)

    The increment of this energy corresponding to an increase of the radius from r to r + dr is therefore

    TdS = 8[pi]rTdr (3)

    Now this increase of energy was obtained by forcing in air at a pressure greater than the atmospheric pressure, and thus increasing the volume of the bubble.

    Let [Pi] be the atmospheric pressure and [Pi] + p the pressure of the air within the bubble. The volume of the sphere is

    V = 4/3 [pi]r^3, (4)

    and the increment of volume is

    dV= 4[pi]r^2dr (5)

    Now if we suppose a quantity of air already at the pressure [Pi] + p, the work done in forcing it into the bubble pdV. Hence the equation of work and energy is

    pdV = Tds (6)

    or

    4[pi]pr^2dr = 8[pi]r drT (7)

    or

    p = 2T/r (8)

    This, therefore, is the excess of the pressure of the air within the bubble over that of the external air, and it is due to the action of the inner and outer surfaces of the bubble. We may conceive this pressure to arise from the tendency which the bubble has to contract, or in other words from the surface-tension of the bubble.

    If to increase the area of the surface requires the expenditure of work, the surface must resist extension, and if the bubble in contracting can do work, the surface must tend to contract. The surface must therefore act like a sheet of india-rubber when extended both in length and breadth, that is, it must exert surface-tension. The tension of the sheet of india-rubber, however, depends on the extent to which it is stretched, and may be different in different directions, whereas the tension of the surface of a liquid remains the same however much the film is extended, and the tension at any point is the same in all directions.

    The intensity of this surface-tension is measured by the stress which it exerts across a line of unit length. Let us measure it in the case of the spherical soap-bubble by considering the stress exerted by one hemisphere of the bubble on the other, across the circumference of a great circle. This stress is balanced by the pressure p acting over the area of the same great circle: it is therefore equal to [pi]r^2p.

    To determine the intensity of the surface-tension we have to divide this quantity by the length of the line across which it acts, which is in this case the circumference of a great circle 2[pi]r. Dividing [pi]r^2p by this length we obtain 1/2pr as the value of the intensity of the surface-tension, and it is plain from equation 8 that this is equal to T. Hence the numerical value of the intensity of the surface-tension is equal to the numerical value of the surface-energy per unit of surface.

    We must remember that since the film has two surfaces the surface-tension of the film is double the tension of the surface of the liquid of which it is formed.

    To determine the relation between the surface-tension and the pressure which balances it when the form of the surface is not spherical, let us consider the following case:--

    [Illustration: Fig. 9.]

    Non-spherical soap bubble

    Let fig. 9 represent a section through the axis Cc of a soap-bubble in the form of a figure of revolution bounded by two circular disks AB and ab, and having the meridian section APa. Let PQ be an imaginary section normal to the axis. Let the radius of this section PR be y, and let PT, the tangent at P, make an angle a with the axis.

    Let us consider the stresses which are exerted across this imaginary section by the lower part on the upper part. If the internal pressure exceeds the external pressure by p, there is in the first place a force [pi]y^2p acting upwards arising from the pressure p over the area of the section. In the next place, there is the surface-tension acting downwards, but at an angle a with the vertical, across the circular section of the bubble itself, whose circumference is 2[pi]y, and the downward force is therefore 2[pi]yT cos a.

    Now these forces are balanced by the external force which acts on the disk ACB, which we may call F. Hence equating the forces which act on the portion included between ACB and PRQ

    [pi]y^2p - 2[pi]yT cos[alpha] = -F (9).

    If we make CR=z, and suppose z to vary, the shape of the bubble of course remaining the same, the values of y and of a will change, but the other quantities will be constant. In studying these variations we may if we please take as our independent variable the length s of the meridian section AP reckoned from A. Differentiating equation 9 with respect to s we obtain, after dividing by 2[pi] as a common factor,

    dy dy d[alpha]
    py -- - T cos[alpha] -- + Ty sin[alpha] -------- = 0 (10).
    ds ds ds

    Now

    dy
    -- = sin[alpha] (11).
    ds

    The radius of curvature of the meridian section is

    ds
    R1 = - -------- (12).
    d[alpha]

    The radius of curvature of a normal section of the surface at right angles to the meridian section is equal to the part of the normal cut off by the axis, which is

    R2 = PN = y/cos[alpha] (13).

    Hence dividing equation 10 by $y sin \alpha$, we find

    p = T(1/R1 + 1/R2) (14).

    This equation, which gives the pressure in terms of the principal radii of curvature, though here proved only in the case of a surface of revolution, must be true of all surfaces. For the curvature of any surface at a given point may be completely defined in terms of the positions of its principal normal sections and their radii of curvature.

    Before going further we may deduce from equation 9 the nature of all the figures of revolution which a liquid film can assume. Let us first determine the nature of a curve, such that if it is rolled on the axis its origin will trace out the meridian section of the bubble. Since at any instant the rolling curve is rotating about the point of contact with the axis, the line drawn from this point of contact to the tracing point must be normal to the direction of motion of the tracing point.

    Hence if N is the point of contact, NP must be normal to the traced curve. Also, since the axis is a tangent to the rolling curve, the ordinate PR is the perpendicular from the tracing point P on the tangent. Hence the relation between the radius vector and the perpendicular on the tangent of the rolling curve must be identical with the relation between the normal PN and the ordinate PR of the traced curve. If we write r for PN, then y = r cos[alpha], and equation 9 becomes

    / T \ F

    y^2( 2 -- -1 ) = -----.
    \ pr / [pi]p

    This relation between y and r is identical with the relation between the perpendicular from the focus of a conic section on the tangent at a given point and the focal distance of that point, provided the transverse and conjugate axes of the conic are 2a and 2b respectively, where

    T F

    a = ---, and b^2 = -----.
    p [pi]p

    Hence the meridian section of the film may be traced by the focus of such a conic, if the conic is made to roll on the axis.

    On the different Forms of the Meridian Line.--1. When the conic is an ellipse the meridian line is in the form of a series of waves, and the film itself has a series of alternate swellings and contractions as represented in figs. 9 and 10. This form of the film is called the unduloid.

    1a. When the ellipse becomes a circle, the meridian line becomes a straight line parallel to the axis, and the film passes into the form of a cylinder of revolution.

    1b. As the ellipse degenerates into the straight line joining its foci, the contracted parts of the unduloid become narrower, till at last the figure becomes a series of spheres in contact.

    In all these cases the internal pressure exceeds the external by 2T/a where a is the semi-transverse axis of the conic. The resultant of the internal pressure and the surface-tension is equivalent to a tension along the axis, and the numerical value of this tension is equal to the force due to the action of this pressure on a circle whose diameter is equal to the conjugate axis of the ellipse.

    1. When the conic is a parabola the meridian line is a catenary (fig.

    11); the internal pressure is equal to the external pressure, and the tension along the axis is equal to 2[pi]Tm where m is the distance of the vertex from the focus.

    1. When the conic is a hyperbola the meridian line is in the form of a

    looped curve (fig. 12). The corresponding figure of the film is called the nodoid. The resultant of the internal pressure and the surface-tension is equivalent to a pressure along the axis equal to that due to a pressure p acting on a circle whose diameter is the conjugate axis of the hyperbola.

    When the conjugate axis of the hyperbola is made smaller and smaller, the nodoid approximates more and more to the series of spheres touching each other along the axis. When the conjugate axis of the hyperbola increases without limit, the loops of the nodoid are crowded on one another, and each becomes more nearly a ring of circular section, without, however, ever reaching this form. The only closed surface belonging to the series is the sphere.

    These figures of revolution have been studied mathematically by C.W.B.

    Poisson,[3] Goldschmidt,[4] L.L. Lindelof and F.M.N. Moigno,[5] C.E.

    Delaunay,[6] A.H.E. Lamarle,[7] A. Beer,[8] and V.M.A. Mannheim,[9] and have been produced experimentally by Plateau[10] in the two different ways already described.

    [Illustration: FIG. 10.--Unduloid.]

    [Illustration: FIG. 11.--Catenoid.]

    [Illustration: FIG. 12.--Noboid.]

    The limiting conditions of the stability of these figures have been studied both mathematically and experimentally. We shall notice only two of them, the cylinder and the catenoid.

    [Illustration: FIG. 13.]

    Stability of the Cylinder.--The cylinder is the limiting form of the unduloid when the rolling ellipse becomes a circle. When the ellipse differs infinitely little from a circle, the equation of the meridian line becomes approximately y = a + c sin(x/a) where c is small. This is a simple harmonic wave-line, whose mean distance from the axis is a, whose wave-length is 2[pi]a and whose amplitude is c. The internal pressure corresponding to this unduloid is as before p = T/a.

    Now consider a portion of a cylindric film of length x terminated by two equal disks of radius r and containing a certain volume of air. Let one of these disks be made to approach the other by a small quantity dx. The film will swell out into the convex part of an unduloid, having its largest section midway between the disks, and we have to determine whether the internal pressure will be greater or less than before. If A and C (fig.

    13) are the disks, and if x the distance between the disks is equal to [pi]r half the wave-length of the harmonic curve, the disks will be at the points where the curve is at its mean distance from the axis, and the pressure will therefore be T/r as before. If A1, C1 are the disks, so that the distance between them is less than [pi]r, the curve must be produced beyond the disks before it is at its mean distance from the axis. Hence in this case the mean distance is less than r, and the pressure will be greater than T/r.

    If, on the other hand, the disks are at A2 and C2, so that the distance between them is greater than [pi]r, the curve will reach its mean distance from the axis before it reaches the disks. The mean distance will therefore be greater than r, and the pressure will be less than T/r. Hence if one of the disks be made to approach the other, the internal pressure will be increased if the distance between the disks is less than half the circumference of either, and the pressure will be diminished if the distance is greater than this quantity.

    In the same way we may show that if the distance between the disks is increased, the pressure will be diminished or increased according as the distance is less or more than half the circumference of either.

    Now let us consider a cylindric film contained between two equal fixed disks. A and B, and let a third disk, C, be placed midway between. Let C be slightly displaced towards A. If AC and CB are each less than half the circumference of a disk the pressure on C will increase on the side of A and diminish on the side of B. The resultant force on C will therefore tend to oppose the displacement and to bring C back to its original position. The equilibrium of C is therefore stable.

    It is easy to show that if C had been placed in any other position than the middle, its equilibrium would have been stable. Hence the film is stable as regards longitudinal displacements. It is also stable as regards displacements transverse to the axis, for the film is in a state of tension, and any lateral displacement of its middle parts would produce a resultant force tending to restore the film to its original position.

    Hence if the length of the cylindric film is less than its circumference, it is in stable equilibrium. But if the length of the cylindric film is greater than its circumference, and if we suppose the disk C to be placed midway between A and B, and to be moved towards A, the pressure on the side next A will diminish, and that on the side next B will increase, so that the resultant force will tend to increase the displacement, and the equilibrium of the disk C is therefore unstable.

    Hence the equilibrium of a cylindric film whose length is greater than its circumference is unstable. Such a film, if ever so little disturbed, will begin to contract at one secton and to expand at another, till its form ceases to resemble a cylinder, if it does not break up into two parts which become ultimately portions of spheres.

    Instability of a Jet of Liquid.--When a liquid flows out of a vessel through a circular opening in the bottom of the vessel, the form of the stream is at first nearly cylindrical though its diameter gradually diminishes from the orifice downwards on account of the increasing velocity of the liquid. But the liquid after it leaves the vessel is subject to no forces except gravity, the pressure of the air, and its own surface-tension.

    Of these gravity has no effect on the form of the stream except in drawing asunder its parts in a vertical direction, because the lower parts are moving faster than the upper parts. The resistance of the air produces little disturbance until the velocity becomes very great.

    But the surface-tension, acting on a cylindric column of liquid whose length exceeds the limit of stability, begins to produce enlargements and contractions in the stream as soon as the liquid has left the orifice, and these inequalities in the figure of the column go on increasing till it is broken up into elongated fragments.

    These fragments as they are falling through the air continue to be acted on by surface-tension. They therefore shorten themselves, and after a series of oscillations in which they become alternately elongated and flattened, settle down into the form of spherical drops.

    This process, which we have followed as it takes place on an individual portion of the falling liquid, goes through its several phases at different distances from the orifice, so that if we examine different portions of the stream as it descends, we shall find next the orifice the unbroken column, then a series of contractions and enlargements, then elongated drops, then flattened drops, and so on till the drops become spherical.

    [The circumstances attending the resolution of a cylindrical jet into drops were admirably examined and described by F. Savart ("Memoire sur la constitution des veines liquides lancees par des orifices circulaires en minces parois," Ann. d. Chim. t. liii., 1833) and for the most part explained with great sagacity by Plateau.

    Let us conceive an infinitely long circular cylinder of liquid, at rest (a motion common to every part of the fluid is necessarily without influence upon the stability, and may therefore be left out of account for convenience of conception and expression), and inquire under what circumstances it is stable or unstable, for small displacements, symmetrical about the axis of figure.

    Whatever the deformation of the originally straight boundary of the axial section may be, it can be resolved by Fourier's theorem into deformations of the harmonic type. These component deformations are in general infinite in number, of very wave-length and of arbitrary phase; but in the first stages of the motion, with which alone we are at present concerned, each produces its effect independently of every other, and may be considered by itself. Suppose, therefore, that the equation of the boundary is

    r = a + a cos kz, (1)

    where a is a small quantity, the axis of z being that of symmetry. The wave-length of the disturbance may be called [lambda], and is connected with k by the equation k =2[pi]/[lambda]. The capillary tension endeavours to contract the surface of the fluid; so that the stability, or instability, of the cylindrical form of equilibrium depends upon whether the surface (enclosing a given volume) be greater or less respectively after the displacement than before.

    It has been proved by Plateau (vide supra) that the surface is greater than before displacement if ka > 1, that is, if [lambda] < 2[pi]a; but less if ka < 1, or [lambda] > 2[pi]a. Accordingly, the equilibrium is stable if [lambda] be less than the circumference; but unstable if [lambda] be greater than the circumference of the cylinder.

    Disturbances of the former kind lead to vibrations of harmonic type, whose amplitudes always remain small; but disturbances, whose wave-length exceeds the circumference, result in a greater and greater departure from the cylindrical figure. The analytical expression for the motion in the latter case involves exponential terms, one of which (except in case of a particular relation between the initial displacements and velocities) increases rapidly, being equally multiplied in equal times.

    The coefficient (q) of the time in the exponential term (e^{qt}) may be considered to measure the degree of dynamical instability; its reciprocal 1/q is the time in which the disturbance is multiplied in the ratio 1 : e.

    The degree of instability, as measured by q, is not to be determined from statical considerations only; otherwise there would be no limit to the increasing efficiency of the longer wave-lengths. The joint operation of superficial tension and inertia in fixing the wave-length of maximum instability was first considered by Lord Rayleigh in a paper (Math. Soc. Proc., November 1878) on the "Instability of Jets." It appears that the value of q may be expressed in the form

    / / T \

    q = / ( -------- ).F(ka), (2)
    \/ \[rho]a^3/

    where, as before, T is the superficial tension, [rho] the density, and F is given by the following table: --

    +--------+--------+--------+--------+
    | k^2a^2.| F(ka). | k^2a^2.| F(ka). |
    +--------+--------+--------+--------+
    | .05 | .1536 | .4 | .3382 |
    | .1 | .2108 | .5 | .3432 |
    | .2 | .2794 | .6 | .3344 |
    | .3 | .3182 | .8 | .2701 |
    | | | .9 | .2015 |
    +--------+--------+--------+--------+

    The greatest value of F thus corresponds, not to a zero value of k^2a^2, but approximately to k^2a^2 = .4858, or to [lambda] = 4.508 X 2a. Hence the maximum instability occurs when the wave-length of disturbance is about half as great again as that at which instability first commences.

    Taking for water, in C.G.S. units, T = 81, [rho] = 1, we get for the case of maximum instability

    a^(3/2)
    q_(-1) = --------- = .115d^(3/2) (3),
    ## 81 X .343

    if d be the diameter of the cylinder. Thus, if d = 1, q^(-1) = .115; or for a diameter of one centimetre the disturbance is multiplied 2.7 times in about one-ninth of a second. If the disturbance be multiplied 1000 fold in time, t, qt = 3log_e 10 = 6.9, so that t = .79d^(3/2). For example, if the diameter be one millimetre, the disturbance is multiplied 1000 fold in about one-fortieth of a second. In view of these estimates the rapid disintegration of a fine jet of water will not cause surprise.

    The relative importance of two harmonic disturbances depends upon their initial magnitudes, and upon the rate at which they grow. When the initial values are very small, the latter consideration is much the more important; for, if the disturbances be represented by a1e^(q1t), a2e^(q2t), in which q1 exceeds q2, their ratio is (a1/a2) e^{-(q1-q2)t}; and this ratio decreases without limit with the time, whatever be the initial (finite) ratio [alpha]2:[alpha]1.

    If the initial disturbances are small enough, that one is ultimately preponderant for which the measure of instability is greatest. The smaller the causes by which the original equilibrium is upset, the more will the cylindrical mass tend to divide itself regularly into portions whose length is equal to 4.5 times the diameter. But a disturbance of less favourable wave-length may gain the preponderance in case its magnitude be sufficient to produce disintegration in a less time than that required by the other disturbances present.

    The application of these results to actual jets presents no great difficulty. The disturbances by which equilibrium is upset are impressed upon the fluid as it leaves the aperture, and the continuous portion of the jet represents the distance travelled during the time necessary to produce disintegration. Thus the length of the continuous portion necessarily depends upon the character of the disturbances in respect of amplitude and wave-length. It may be increased considerably, as F.

    Savart showed, by a suitable isolation of the reservoir from tremors, whether due to external sources or to the impact of the jet itself in the vessel

    Edition notice Project Gutenberg source, credits & licence

    The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.

    Title
    Encyclopaedia Britannica, 11th Edition, "Capefigue" to "Carneades"
    Author
    Various
    Release date
    July 9, 2010 [eBook #33127]
    Language
    English
    Credits
    Produced by Marius Masi, Don Kretz and the Online
    Most recently updated
    January 6, 2021
    Transcriber and production notes
    Produced by Marius Masi, Don Kretz and the Online
    Distributed Proofreading Team at https://www.pgdp.net
    
    Transcriber's notes:
    Front matter as received (title page, contents)
    (1) Numbers following letters (without space) like C2 were originally
          printed in subscript. Letter subscripts are preceded by an
          underscore, like C_n.
    
    (2) Characters following a carat (^) were printed in superscript.
    
    (3) Side-notes were relocated to function as titles of their respective
          paragraphs.
    
    (4) Macrons and breves above letters and dots below letters were not
          inserted.
    
    (5) [oo] stands for the infinity symbol.
    
    (6) The following typographical error has been corrected:
    
        Article CAPILLARY ACTION: "Let the radius of this section PR be y,
          and let PT, the tangent at P, make an angle a with the axis." 'be'
          amended from 'by'.
    
    
    
    
              ENCYCLOPAEDIA BRITANNICA
    
      A DICTIONARY OF ARTS, SCIENCES, LITERATURE
               AND GENERAL INFORMATION
    
                  ELEVENTH EDITION
    
    
                VOLUME V, SLICE III
    
              Capefigue to Carneades
    
    
    
    
    ARTICLES IN THIS SLICE:
    
    
      CAPEFIGUE, JEAN-BAPTISTE RAYMOND  CARBON BISULPHIDE
      CAPEL, ARTHUR CAPEL               CARBONDALE
      CAPEL CURIG                       CARBONIC ACID
      CAPELL, EDWARD                    CARBONIFEROUS SYSTEM
      CAPELLA, MARTIANUS MINNEUS FELIX  CARBORUNDUM
      CAPE MAY                          CARBOY
      CAPENA                            CARBUNCLE
      CAPER, FLAVIUS                    CARCAGENTE
      CAPERCALLY                        CARCAR
      CAPERN, EDWARD                    CARCASS
      CAPERNAUM                         CARCASSONNE
      CAPERS                            CARDAMOM
      CAPET                             CARDAN, GIROLAMO
      CAPE TOWN                         CARDENAS
      CAPE VERDE ISLANDS                CARDIFF
      CAPGRAVE, JOHN                    CARDIGAN, JAMES THOMAS BRUDENELL
      CAP HAITIEN                       CARDIGAN
      CAPILLARY ACTION                  CARDIGANSHIRE
      CAPISTRANO, GIOVANNI DI           CARDINAL
      CAPITAL (architecture)            CARDINAL VIRTUES
      CAPITAL (economics)               CARDING
      CAPITAL PUNISHMENT                CARDIOID
      CAPITO WOLFGANG                   CARDONA
      CAPITULARY                        CARDOON
      CAPITULATION                      CARDS, PLAYING
      CAPITULATIONS                     CARDUCCI, BARTOLOMMEO
      CAPIZ                             CARDUCCI, GIOSUE
      CAPMANY Y MONTPALAU, ANTONIO DE   CARDWELL, EDWARD
      CAPO D'ISTRIA, GIOVANNI ANTONIO   CARDWELL, EDWARD CARDWELL
      CAPODISTRIA                       CARDWELL
      CAPONIER                          CAREW, GEORGE
      CAPPADOCIA                        CAREW, RICHARD
      CAPPEL                            CAREW, THOMAS
      CAPPEL, LOUIS                     CAREY, HENRY
      CAPPELLO, BIANCA                  CAREY, HENRY CHARLES
      CAPPERONNIER, CLAUDE              CAREY, WILLIAM
      CAPPONI, GINO                     CARGILL, DONALD
      CAPPONI, PIERO                    CARGO
      CAPRAIA                           CARIA
      CAPRERA                           CARIACO
      CAPRI                             CARIBBEE ISLANDS
      CAPRICCIO                         CARIBS
      CAPRICORNUS                       CARICATURE
      CAPRIFOLIACEAE                    CARIGARA
      CAPRIVI DE CAPRERA, GEORG VON     CARIGNANO
      CAPRONNIER, JEAN BAPTISTE         CARILLON
      CAPSICUM                          CARINI
      CAPSTAN                           CARINTHIA
      CAPSULE                           CARINUS, MARCUS AURELIUS
      CAPTAIN                           CARIPE
      CAPTAL                            CARISBROOKE
      CAPTION                           CARISSIMI, GIACOMO
      CAPTIVE                           CARLETON, WILLIAM
      CAPTURE                           CARLETON PLACE
      CAPUA (of Campania, Italy)        CARLILE, RICHARD
      CAPUA (ancient city of Italy)     CARLINGFORD, CHICHESTER FORTESCUE
      CAPUCHIN MONKEY                   CARLINGFORD
      CAPUCHINS                         CARLI-RUBBI, GIOVANNI RINALDO
      CAPUS, ALFRED                     CARLISLE, EARLS OF
      CAPYBARA                          CARLISLE (of England)
      CAR                               CARLISLE (Pennsylvania, U.S.A.)
      CARABINIERS                       CARLOFORTE
      CARABOBO                          CARLOMAN (king of Bavaria and Italy)
      CARACAL (of Rumania)              CARLOMAN (Frankish princes)
      CARACAL (animal)                  CARLOS I
      CARACALLA                         CARLOS, DON (prince of Asturias)
      CARACAS                           CARLOS, DON (son of King Charles IV)
      CARACCI                           CARLOS, DON (prince of Bourbon)
      CARACCIOLO, FRANCESCO             CARLOW (county of Ireland)
      CARACOLE                          CARLOW (town of Ireland)
      CARACTACUS                        CARLSBAD
      CARADOC SERIES                    CARLSBAD DECREES
      CARALES                           CARLSTADT
      CARAN D'ACHE                      CARLYLE, ALEXANDER
      CARAPACE                          CARLYLE, JOSEPH DACRE
      CARAPEGUA                         CARLYLE, THOMAS
      CARAT                             CARMAGNOLA, FRANCESCO BUSSONE
      CARAUSIUS, MARCUS AURELIUS        CARMAGNOLA
      CARAVACA                          CARMAGNOLE
      CARAVAGGIO, MICHELANGELO DA       CARMARTHEN
      CARAVAGGIO, POLIDORO CALDARA DA   CARMARTHENSHIRE
      CARAVAN                           CARMATHIANS
      CARAVANSERAI                      CARMAUX
      CARAVEL                           CARMEL
      CARAVELLAS                        CARMELITES
      CARAWAY                           CARMICHAEL, GERSHOM
      CARBALLO                          CARMINE
      CARBAZOL                          CARMONA
      CARBIDE                           CARNAC
      CARBINE                           CARNARVON, EARLDOM OF
      CARBO                             CARNARVON
      CARBOHYDRATE                      CARNARVONSHIRE
      CARBOLIC ACID                     CARNATIC
      CARBON                            CARNATION
      CARBONADO                         CARNEA
      CARBONARI                         CARNEADES
    Header as received
    The Project Gutenberg eBook of Encyclopaedia Britannica, 11th Edition, "Capefigue" to "Carneades"
        
    This eBook is for the use of anyone anywhere in the United States and
    most other parts of the world at no cost and with almost no restrictions
    whatsoever. You may copy it, give it away or re-use it under the terms
    of the Project Gutenberg License included with this eBook or online
    at www.gutenberg.org. If you are not located in the United States,
    you will have to check the laws of the country where you are located
    before using this eBook.
    
    Title: Encyclopaedia Britannica, 11th Edition, "Capefigue" to "Carneades"
    
    Author: Various
    
    
            
    Release date: July 9, 2010 [eBook #33127]
                    Most recently updated: January 6, 2021
    
    Language: English
    
    Other information and formats: www.gutenberg.org/ebooks/33127
    
    Credits: Produced by Marius Masi, Don Kretz and the Online
            Distributed Proofreading Team at https://www.pgdp.net
    Full Project Gutenberg licence
        
    
    Updated editions will replace the previous one—the old editions will
    be renamed.
    
    Creating the works from print editions not protected by U.S. copyright
    law means that no one owns a United States copyright in these works,
    so the Foundation (and you!) can copy and distribute it in the United
    States without permission and without paying copyright
    royalties. Special rules, set forth in the General Terms of Use part
    of this license, apply to copying and distributing Project
    Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
    concept and trademark. Project Gutenberg is a registered trademark,
    and may not be used if you charge for an eBook, except by following
    the terms of the trademark license, including paying royalties for use
    of the Project Gutenberg trademark. If you do not charge anything for
    copies of this eBook, complying with the trademark license is very
    easy. You may use this eBook for nearly any purpose such as creation
    of derivative works, reports, performances and research. Project
    Gutenberg eBooks may be modified and printed and given away—you may
    do practically ANYTHING in the United States with eBooks not protected
    by U.S. copyright law. Redistribution is subject to the trademark
    license, especially commercial redistribution.
    
    
    START: FULL LICENSE
    
    THE FULL PROJECT GUTENBERG™ LICENSE
    
    PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
    
    To protect the Project Gutenberg™ mission of promoting the free
    distribution of electronic works, by using or distributing this work
    (or any other work associated in any way with the phrase “Project
    Gutenberg”), you agree to comply with all the terms of the Full
    Project Gutenberg License available with this file or online at
    www.gutenberg.org/license.
    
    Section 1. General Terms of Use and Redistributing Project Gutenberg
    electronic works
    
    1.A. By reading or using any part of this Project Gutenberg
    electronic work, you indicate that you have read, understand, agree to
    and accept all the terms of this license and intellectual property
    (trademark/copyright) agreement. If you do not agree to abide by all
    the terms of this agreement, you must cease using and return or
    destroy all copies of Project Gutenberg electronic works in your
    possession. If you paid a fee for obtaining a copy of or access to a
    Project Gutenberg electronic work and you do not agree to be bound
    by the terms of this agreement, you may obtain a refund from the person
    or entity to whom you paid the fee as set forth in paragraph 1.E.8.
    
    1.B. “Project Gutenberg” is a registered trademark. It may only be
    used on or associated in any way with an electronic work by people who
    agree to be bound by the terms of this agreement. There are a few
    things that you can do with most Project Gutenberg electronic works
    even without complying with the full terms of this agreement. See
    paragraph 1.C below. There are a lot of things you can do with Project
    Gutenberg electronic works if you follow the terms of this
    agreement and help preserve free future access to Project Gutenberg
    electronic works. See paragraph 1.E below.
    
    1.C. The Project Gutenberg Literary Archive Foundation (“the
    Foundation” or PGLAF), owns a compilation copyright in the collection
    of Project Gutenberg electronic works. Nearly all the individual
    works in the collection are in the public domain in the United
    States. If an individual work is unprotected by copyright law in the
    United States and you are located in the United States, we do not
    claim a right to prevent you from copying, distributing, performing,
    displaying or creating derivative works based on the work as long as
    all references to Project Gutenberg are removed. Of course, we hope
    that you will support the Project Gutenberg mission of promoting
    free access to electronic works by freely sharing Project Gutenberg
    works in compliance with the terms of this agreement for keeping the
    Project Gutenberg name associated with the work. You can easily
    comply with the terms of this agreement by keeping this work in the
    same format with its attached full Project Gutenberg License when
    you share it without charge with others.
    
    1.D. The copyright laws of the place where you are located also govern
    what you can do with this work. Copyright laws in most countries are
    in a constant state of change. If you are outside the United States,
    check the laws of your country in addition to the terms of this
    agreement before downloading, copying, displaying, performing,
    distributing or creating derivative works based on this work or any
    other Project Gutenberg work. The Foundation makes no
    representations concerning the copyright status of any work in any
    country other than the United States.
    
    1.E. Unless you have removed all references to Project Gutenberg:
    
    1.E.1. The following sentence, with active links to, or other
    immediate access to, the full Project Gutenberg License must appear
    prominently whenever any copy of a Project Gutenberg work (any work
    on which the phrase “Project Gutenberg” appears, or with which the
    phrase “Project Gutenberg” is associated) is accessed, displayed,
    performed, viewed, copied or distributed:
    
        This eBook is for the use of anyone anywhere in the United States and most
        other parts of the world at no cost and with almost no restrictions
        whatsoever. You may copy it, give it away or re-use it under the terms
        of the Project Gutenberg™ License included with this eBook or online
        at www.gutenberg.org. If you
        are not located in the United States, you will have to check the laws
        of the country where you are located before using this eBook.
      
    1.E.2. If an individual Project Gutenberg electronic work is
    derived from texts not protected by U.S. copyright law (does not
    contain a notice indicating that it is posted with permission of the
    copyright holder), the work can be copied and distributed to anyone in
    the United States without paying any fees or charges. If you are
    redistributing or providing access to a work with the phrase “Project
    Gutenberg” associated with or appearing on the work, you must comply
    either with the requirements of paragraphs 1.E.1 through 1.E.7 or
    obtain permission for the use of the work and the Project Gutenberg
    trademark as set forth in paragraphs 1.E.8 or 1.E.9.
    
    1.E.3. If an individual Project Gutenberg electronic work is posted
    with the permission of the copyright holder, your use and distribution
    must comply with both paragraphs 1.E.1 through 1.E.7 and any
    additional terms imposed by the copyright holder. Additional terms
    will be linked to the Project Gutenberg License for all works
    posted with the permission of the copyright holder found at the
    beginning of this work.
    
    1.E.4. Do not unlink or detach or remove the full Project Gutenberg
    License terms from this work, or any files containing a part of this
    work or any other work associated with Project Gutenberg.
    
    1.E.5. Do not copy, display, perform, distribute or redistribute this
    electronic work, or any part of this electronic work, without
    prominently displaying the sentence set forth in paragraph 1.E.1 with
    active links or immediate access to the full terms of the Project
    Gutenberg License.
    
    1.E.6. You may convert to and distribute this work in any binary,
    compressed, marked up, nonproprietary or proprietary form, including
    any word processing or hypertext form. However, if you provide access
    to or distribute copies of a Project Gutenberg work in a format
    other than “Plain Vanilla ASCII” or other format used in the official
    version posted on the official Project Gutenberg website
    (www.gutenberg.org), you must, at no additional cost, fee or expense
    to the user, provide a copy, a means of exporting a copy, or a means
    of obtaining a copy upon request, of the work in its original “Plain
    Vanilla ASCII” or other form. Any alternate format must include the
    full Project Gutenberg License as specified in paragraph 1.E.1.
    
    1.E.7. Do not charge a fee for access to, viewing, displaying,
    performing, copying or distributing any Project Gutenberg works
    unless you comply with paragraph 1.E.8 or 1.E.9.
    
    1.E.8. You may charge a reasonable fee for copies of or providing
    access to or distributing Project Gutenberg electronic works
    provided that:
    
        • You pay a royalty fee of 20% of the gross profits you derive from
            the use of Project Gutenberg works calculated using the method
            you already use to calculate your applicable taxes. The fee is owed
            to the owner of the Project Gutenberg trademark, but he has
            agreed to donate royalties under this paragraph to the Project
            Gutenberg Literary Archive Foundation. Royalty payments must be paid
            within 60 days following each date on which you prepare (or are
            legally required to prepare) your periodic tax returns. Royalty
            payments should be clearly marked as such and sent to the Project
            Gutenberg Literary Archive Foundation at the address specified in
            Section 4, “Information about donations to the Project Gutenberg
            Literary Archive Foundation.”
        
        • You provide a full refund of any money paid by a user who notifies
            you in writing (or by e-mail) within 30 days of receipt that s/he
            does not agree to the terms of the full Project Gutenberg™
            License. You must require such a user to return or destroy all
            copies of the works possessed in a physical medium and discontinue
            all use of and all access to other copies of Project Gutenberg™
            works.
        
        • You provide, in accordance with paragraph 1.F.3, a full refund of
            any money paid for a work or a replacement copy, if a defect in the
            electronic work is discovered and reported to you within 90 days of
            receipt of the work.
        
        • You comply with all other terms of this agreement for free
            distribution of Project Gutenberg™ works.
        
    
    1.E.9. If you wish to charge a fee or distribute a Project
    Gutenberg™ electronic work or group of works on different terms than
    are set forth in this agreement, you must obtain permission in writing
    from the Project Gutenberg Literary Archive Foundation, the manager of
    the Project Gutenberg™ trademark. Contact the Foundation as set
    forth in Section 3 below.
    
    1.F.
    
    1.F.1. Project Gutenberg volunteers and employees expend considerable
    effort to identify, do copyright research on, transcribe and proofread
    works not protected by U.S. copyright law in creating the Project
    Gutenberg™ collection. Despite these efforts, Project Gutenberg™
    electronic works, and the medium on which they may be stored, may
    contain “Defects,” such as, but not limited to, incomplete, inaccurate
    or corrupt data, transcription errors, a copyright or other
    intellectual property infringement, a defective or damaged disk or
    other medium, a computer virus, or computer codes that damage or
    cannot be read by your equipment.
    
    1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
    of Replacement or Refund” described in paragraph 1.F.3, the Project
    Gutenberg Literary Archive Foundation, the owner of the Project
    Gutenberg™ trademark, and any other party distributing a Project
    Gutenberg™ electronic work under this agreement, disclaim all
    liability to you for damages, costs and expenses, including legal
    fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
    LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
    PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
    TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
    LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
    INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
    DAMAGE.
    
    1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
    defect in this electronic work within 90 days of receiving it, you can
    receive a refund of the money (if any) you paid for it by sending a
    written explanation to the person you received the work from. If you
    received the work on a physical medium, you must return the medium
    with your written explanation. The person or entity that provided you
    with the defective work may elect to provide a replacement copy in
    lieu of a refund. If you received the work electronically, the person
    or entity providing it to you may choose to give you a second
    opportunity to receive the work electronically in lieu of a refund. If
    the second copy is also defective, you may demand a refund in writing
    without further opportunities to fix the problem.
    
    1.F.4. Except for the limited right of replacement or refund set forth
    in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
    OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
    LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
    
    1.F.5. Some states do not allow disclaimers of certain implied
    warranties or the exclusion or limitation of certain types of
    damages. If any disclaimer or limitation set forth in this agreement
    violates the law of the state applicable to this agreement, the
    agreement shall be interpreted to make the maximum disclaimer or
    limitation permitted by the applicable state law. The invalidity or
    unenforceability of any provision of this agreement shall not void the
    remaining provisions.
    
    1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
    trademark owner, any agent or employee of the Foundation, anyone
    providing copies of Project Gutenberg™ electronic works in
    accordance with this agreement, and any volunteers associated with the
    production, promotion and distribution of Project Gutenberg™
    electronic works, harmless from all liability, costs and expenses,
    including legal fees, that arise directly or indirectly from any of
    the following which you do or cause to occur: (a) distribution of this
    or any Project Gutenberg work, (b) alteration, modification, or
    additions or deletions to any Project Gutenberg work, and (c) any
    Defect you cause.
    
    Section 2. Information about the Mission of Project Gutenberg
    
    Project Gutenberg is synonymous with the free distribution of
    electronic works in formats readable by the widest variety of
    computers including obsolete, old, middle-aged and new computers. It
    exists because of the efforts of hundreds of volunteers and donations
    from people in all walks of life.
    
    Volunteers and financial support to provide volunteers with the
    assistance they need are critical to reaching Project Gutenberg’s
    goals and ensuring that the Project Gutenberg collection will
    remain freely available for generations to come. In 2001, the Project
    Gutenberg Literary Archive Foundation was created to provide a secure
    and permanent future for Project Gutenberg and future
    generations. To learn more about the Project Gutenberg Literary
    Archive Foundation and how your efforts and donations can help, see
    Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
    
    Section 3. Information about the Project Gutenberg Literary Archive Foundation
    
    The Project Gutenberg Literary Archive Foundation is a non-profit
    501(c)(3) educational corporation organized under the laws of the
    state of Mississippi and granted tax exempt status by the Internal
    Revenue Service. The Foundation’s EIN or federal tax identification
    number is 64-6221541. Contributions to the Project Gutenberg Literary
    Archive Foundation are tax deductible to the full extent permitted by
    U.S. federal laws and your state’s laws.
    
    The Foundation’s business office is located at 41 Watchung Plaza #516,
    Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
    to date contact information can be found at the Foundation’s website
    and official page at www.gutenberg.org/contact
    
    Section 4. Information about Donations to the Project Gutenberg
    Literary Archive Foundation
    
    Project Gutenberg™ depends upon and cannot survive without widespread
    public support and donations to carry out its mission of
    increasing the number of public domain and licensed works that can be
    freely distributed in machine-readable form accessible by the widest
    array of equipment including outdated equipment. Many small donations
    ($1 to $5,000) are particularly important to maintaining tax exempt
    status with the IRS.
    
    The Foundation is committed to complying with the laws regulating
    charities and charitable donations in all 50 states of the United
    States. Compliance requirements are not uniform and it takes a
    considerable effort, much paperwork and many fees to meet and keep up
    with these requirements. We do not solicit donations in locations
    where we have not received written confirmation of compliance. To SEND
    DONATIONS or determine the status of compliance for any particular state
    visit www.gutenberg.org/donate.
    
    While we cannot and do not solicit contributions from states where we
    have not met the solicitation requirements, we know of no prohibition
    against accepting unsolicited donations from donors in such states who
    approach us with offers to donate.
    
    International donations are gratefully accepted, but we cannot make
    any statements concerning tax treatment of donations received from
    outside the United States. U.S. laws alone swamp our small staff.
    
    Please check the Project Gutenberg web pages for current donation
    methods and addresses. Donations are accepted in a number of other
    ways including checks, online payments and credit card donations. To
    donate, please visit: www.gutenberg.org/donate.
    
    Section 5. General Information About Project Gutenberg electronic works
    
    Professor Michael S. Hart was the originator of the Project
    Gutenberg concept of a library of electronic works that could be
    freely shared with anyone. For forty years, he produced and
    distributed Project Gutenberg eBooks with only a loose network of
    volunteer support.
    
    Project Gutenberg eBooks are often created from several printed
    editions, all of which are confirmed as not protected by copyright in
    the U.S. unless a copyright notice is included. Thus, we do not
    necessarily keep eBooks in compliance with any particular paper
    edition.
    
    Most people start at our website which has the main PG search
    facility: www.gutenberg.org.
    
    This website includes information about Project Gutenberg,
    including how to make donations to the Project Gutenberg Literary
    Archive Foundation, how to help produce our new eBooks, and how to
    subscribe to our email newsletter to hear about new eBooks.

    Source: Project Gutenberg ebook #33127. Public-domain status is recorded per item; the licence text above is reproduced unchanged.

    Source
    Project Gutenberg
    Record
    ebook 33127
    Rights
    public domain (US)
    Rendered
    2026-11-21
    Completeness
    First 200,000 characters rendered.