
Gutenberg · ebook 21724
The handbook of soap manufacture
by W. H. Simmons · English · public domain in the US
PREFACE
In the general advance of technical knowledge and research during the last decade, the Soap Industry has not remained stationary. While there has not perhaps been anything of a very revolutionary character, steady progress has still been made in practically all branches, and the aim of the present work is to describe the manufacture of Household and Toilet Soaps as carried out to-day in an up-to-date and well-equipped factory.
In the more scientific portions of the book, an acquaintance with the principles of elementary chemistry is assumed, and in this we feel justified, as in these days of strenuous competition, no soap-maker can hope to compete successfully with his rivals unless he has a sound theoretical as well as practical knowledge of the nature of the raw materials he uses, and the reactions taking place in the pan, or at other stages of the manufacture. We also venture to hope that the work may prove useful to Works' Chemists and other Analysts consulted in connection with this Industry.
At the same time, in the greater part of the book no chemical knowledge is necessary, the subject being treated in such a way that it is hoped those who are not directly engaged in the manufacture of soap, but who desire a general idea of the subject, will find it of value.
In the sections dealing with the composition and analysis of materials, temperatures are expressed in degrees Centigrade, these being now almost invariably used in scientific work. In the rest of the book, however, they are given in degrees Fahrenheit (the degrees Centigrade being also added in brackets), as in the majority of factories these are still used.
As regards strengths of solution, in some factories the use of Baumé degrees is preferred, whilst in others Twaddell degrees are the custom, and we have therefore given the two figures in all cases.
In the chapter dealing with Oils and Fats, their Saponification Equivalents are given in preference to Saponification Values, as it has been our practice for some years to express our results in this way, as suggested by Allen in Commercial Organic Analysis, and all our records, from which most of the figures for the chief oils and fats are taken, are so stated.
For the illustrations, the authors are indebted to Messrs. E. Forshaw & Son, Ltd., H. D. Morgan, and W. J. Fraser & Co., Ltd.
W. H. S.
H. A. A.
LONDON, September, 1908.
CONTENTS
PAGE
CHAPTER I.
INTRODUCTION. 1
Definition of Soap--Properties--Hydrolysis--Detergent Action.
CHAPTER II.
CONSTITUTION OF OILS AND FATS, AND THEIR SAPONIFICATION 6
Researches of Chevreul and Berthelot--Mixed Glycerides--Modern Theories of Saponification--Hydrolysis accelerated by (1) HEAT OR ELECTRICITY, (2) FERMENTS, Castor-seed Ferment, Steapsin, Emulsin, and (3) CHEMICAL REAGENTS, Sulphuric Acid, Twitchell's Reagent, Hydrochloric Acid, Lime, Magnesia, Zinc Oxide, Soda and Potash.
CHAPTER III.
RAW MATERIALS USED IN SOAP-MAKING 24
Fats and Oils--Waste Fats--Fatty Acids--Less-known Oils and Fats of Limited Use--Various New Fats and Oils Suggested for Soap-making--Rosin--Alkali (Caustic and Carbonated)--Water--Salt--Soap-stock.
CHAPTER IV.
BLEACHING AND TREATMENT OF RAW MATERIALS INTENDED FOR
SOAP-MAKING 41
Palm Oil--Cotton-seed Oil--Cotton-seed "Foots"--Vegetable Oils--Animal Fats--Bone Fat--Rosin.
CHAPTER V.
SOAP-MAKING 45
Classification of Soaps--Direct combination of Fatty Acids with Alkali--Cold Process Soaps--Saponification under Increased or Diminished Pressure--Soft Soap--Marine Soap--Hydrated Soaps, Smooth and Marbled--Pasting or Saponification--Graining Out--Boiling on Strength--Fitting--Curd Soaps--Curd Mottled--Blue and Grey Mottled Soaps--Milling Base--Yellow Household Soaps--Resting of Pans and Settling of Soap--Utilisation of Nigres--Transparent soaps--Saponifying Mineral Oil--Electrical Production of Soap.
CHAPTER VI.
TREATMENT OF SETTLED SOAP 60
Cleansing--Crutching--Liquoring of Soaps--Filling--Neutralising, Colouring and Perfuming--Disinfectant Soaps--Framing--Slabbing--Barring--Open and Close Piling--Drying--Stamping--Cooling.
CHAPTER VII.
TOILET, TEXTILE AND MISCELLANEOUS SOAPS 77
Toilet Soaps--Cold Process soaps--Settled Boiled Soaps--Remelted Soaps--Milled Soaps--Drying--Milling and Incorporating Colour, Perfume, or Medicament--Perfume--Colouring matter--Neutralising and Superfatting Material--Compressing--Cutting--Stamping--Medicated Soaps--Ether Soap--Floating Soaps--Shaving Soaps--Textile Soaps--Soaps for Woollen, Cotton and Silk Industries--Patent Textile Soaps--Miscellaneous Soaps.
CHAPTER VIII.
SOAP PERFUMES 95
Essential Oils--Source and Preparation--Properties--Artificial and Synthetic Perfumes.
CHAPTER IX.
GLYCERINE MANUFACTURE AND PURIFICATION 111
Treatment of Lyes--Evaporation to Crude Glycerine--Distillation--Distilled and Dynamite Glycerine--Chemically Pure Glycerine--Animal Charcoal for Decolorisation--Glycerine obtained by other methods of Saponification--Yield of Glycerine from Fats and Oils.
CHAPTER X.
ANALYSIS OF RAW MATERIALS, SOAP, AND GLYCERINE 117
Fats and Oils--Alkalies and Alkali Salts--Essential Oils--Soap--Lyes--Crude Glycerine.
CHAPTER XI.
STATISTICS OF THE SOAP INDUSTRY 140
APPENDIX A.
COMPARISON OF DEGREES, TWADDELL AND BAUMÉ, WITH ACTUAL DENSITIES 147
APPENDIX B.
COMPARISON OF DIFFERENT THERMOMETRIC SCALES 148
APPENDIX C.
TABLE OF THE SPECIFIC GRAVITIES OF SOLUTIONS OF CAUSTIC SODA 149
APPENDIX D.
TABLE OF STRENGTH OF CAUSTIC POTASH SOLUTIONS AT 60° F. 151
INDEX 153
CHAPTER I.
INTRODUCTION.
Definition of Soap--Properties--Hydrolysis--Detergent Action.
It has been said that the use of soap is a gauge of the civilisation of a nation, but though this may perhaps be in a great measure correct at the present day, the use of soap has not always been co-existent with civilisation, for according to Pliny (Nat. Hist., xxviii., 12, 51) soap was first introduced into Rome from Germany, having been discovered by the Gauls, who used the product obtained by mixing goats' tallow and beech ash for giving a bright hue to the hair.
In West Central Africa, moreover, the natives, especially the Fanti race, have been accustomed to wash themselves with soap prepared by mixing crude palm oil and water with the ashes of banana and plantain skins. The manufacture of soap seems to have flourished during the eighth century in Italy and Spain, and was introduced into France some five hundred years later, when factories were established at Marseilles for the manufacture of olive-oil soap.
Soap does not appear to have been made in England until the fourteenth century, and the first record of soap manufacture in London is in 1524.
From this time till the beginning of the nineteenth century the manufacture of soap developed very slowly, being essentially carried on by rule-of-thumb methods, but the classic researches of Chevreul on the constitution of fats at once placed the industry upon a scientific basis, and stimulated by Leblanc's discovery of a process for the commercial manufacture of caustic soda from common salt, the production of soap has advanced by leaps and bounds until it is now one of the most important of British industries.
Definition of Soap.--The word soap (Latin sapo, which is cognate with Latin sebum, tallow) appears to have been originally applied to the product obtained by treating tallow with ashes.
In its strictly chemical sense it refers to combinations of fatty acids with metallic bases, a definition which includes not only sodium stearate, oleate and palmitate, which form the bulk of the soaps of commerce, but also the linoleates of lead, manganese, etc., used as driers, and various pharmaceutical preparations, e.g., mercury oleate (Hydrargyri oleatum), zinc oleate and lead plaster, together with a number of other metallic salts of fatty acids.
Technically speaking, however, the meaning of the term soap is considerably restricted, being generally limited to the combinations of fatty acids and alkalies, obtained by treating various animal or vegetable fatty matters, or the fatty acids derived therefrom, with soda or potash, the former giving hard soaps, the latter soft soaps.
The use of ammonia as an alkali for soap-making purposes has often been attempted, but owing to the ease with which the resultant soap is decomposed, it can scarcely be looked upon as a product of much commercial value.
H. Jackson has, however, recently patented (Eng. Pat. 6,712, 1906) the use of ammonium oleate for laundry work. This detergent is prepared in the wash-tub at the time of use, and it is claimed that goods are cleansed by merely immersing them in this solution for a short time and rinsing in fresh water.
Neither of the definitions given above includes the sodium and potassium salts of rosin, commonly called rosin soap, for the acid constituents of rosin have been shown to be aromatic, but in view of the analogous properties of these resinates to true soap, they are generally regarded as legitimate constituents of soap, having been used in Great Britain since 1827, and receiving legislative sanction in Holland in 1875.
Other definitions of soap have been given, based not upon its composition, but upon its properties, among which may be mentioned that of Kingzett, who says that "Soap, considered commercially, is a body which on treatment with water liberates alkali," and that of Nuttall, who defines soap as "an alkaline or unctuous substance used in washing and cleansing".
Properties of Soap.--Both soda and potash soaps are readily soluble in either alcohol or hot water. In cold water they dissolve more slowly, and owing to slight decomposition, due to hydrolysis (vide infra), the solution becomes distinctly turbid. Sodium oleate is peculiar in not undergoing hydrolysis except in very dilute solution and at a low temperature. On cooling a hot soap solution, a jelly of more or less firm consistence results, a property possessed by colloidal bodies, such as starch and gelatine, in contradistinction to substances which under the same conditions deposit crystals, due to diminished solubility of the salt at a lower temperature.
Krafft (Journ. Soc. Chem. Ind., 1896, 206, 601; 1899, 691; and 1902,
- and his collaborators, Wiglow, Strutz and Funcke, have
investigated this property of soap solutions very fully, the researches extending over several years. In the light of their more recent work, the molecules, or definite aggregates of molecules, of solutions which become gelatinous on cooling move much more slowly than the molecules in the formation of a crystal, but there is a definite structure, although arranged differently to that of a crystal. In the case of soda soaps the colloidal character increases with the molecular weight of the fatty acids.
Soda soaps are insoluble in concentrated caustic lyes, and, for the most part, in strong solutions of sodium chloride, hence the addition of caustic soda or brine to a solution of soda soap causes the soap to separate out and rise to the surface. Addition of brine to a solution of potash soap, on the other hand, merely results in double decomposition, soda soap and potassium chloride being formed, thus:--
C_{17}H_{35}COOK + NaCl = C_{17}H_{35}COONa + KCl
potassium sodium sodium potassium
stearate chloride stearate chloride
The solubility of the different soaps in salt solution varies very considerably. Whilst sodium stearate is insoluble in a 5 per cent. solution of sodium chloride, sodium laurate requires a 17 per cent. solution to precipitate it, and sodium caproate is not thrown out of solution even by a saturated solution.
Hydrolysis of Soap.--The term "hydrolysis" is applied to any resolution of a body into its constituents where the decomposition is brought about by the action of water, hence when soap is treated with cold water, it is said to undergo hydrolysis, the reaction taking place being represented in its simplest form by the equation:--
2NaC_{18}H_{35}O_{2} + H_{2}O = NaOH + HNa(C_{18}H_{35}O_{2})_{2}
sodium water caustic acid sodium
stearate soda stearate
The actual reaction which occurs has been the subject of investigation by many chemists, and very diverse conclusions have been arrived at.
Chevreul, the pioneer in the modern chemistry of oils and fats, found that a small amount of alkali was liberated, as appears in the above equation, together with the formation of an acid salt, a very minute quantity of free fatty acid remaining in solution. Rotondi (Journ. Soc.
Chem. Ind., 1885, 601), on the other hand, considered that a neutral soap, on being dissolved in water, was resolved into a basic and an acid salt, the former readily soluble in both hot and cold water, the latter insoluble in cold water, and only slightly soluble in hot water. He appears, however, to have been misled by the fact that sodium oleate is readily soluble in cold water, and his views have been shown to be incorrect by Krafft and Stern (Ber. d. Chem. Ges., 1894, 1747 and 1755), who from experiments with pure sodium palmitate and stearate entirely confirm the conclusions arrived at by Chevreul.
The extent of dissociation occurring when a soap is dissolved in water depends upon the nature of the fatty acids from which the soap is made, and also on the concentration of the solution. The sodium salts of cocoa-nut fatty acids (capric, caproic and caprylic acids) are by far the most easily hydrolysed, those of oleic acid and the fatty acids from cotton-seed oil being dissociated more readily than those of stearic acid and tallow fatty acids. The decomposition increases with the amount of water employed.
The hydrolytic action of water on soap is affected very considerably by the presence of certain substances dissolved in the water, particularly salts of calcium and magnesium. Caustic soda exerts a marked retarding effect on the hydrolysis, as do also ethyl and amyl alcohols and glycerol.
Detergent Action of Soap.--The property possessed by soap of removing dirt is one which it is difficult to satisfactorily explain. Many theories, more or less complicated, have been suggested, but even now the question cannot be regarded as solved.
The explanation commonly accepted is that the alkali liberated by hydrolysis attacks any greasy matter on the surface to be cleansed, and, as the fat is dissolved, the particles of dirt are loosened and easily washed off. Berzelius held this view, and considered that the value of a soap depended upon the ease with which it yielded free alkali on solution in water.
This theory is considered by Hillyer (Journ. Amer. Chem. Soc., 1903, 524), however, to be quite illogical, for, as he points out, the liberated alkali would be far more likely to recombine with the acid or acid salt from which it has been separated, than to saponify a neutral glyceride, while, further, unsaponifiable greasy matter is removed by soap as easily as saponifiable fat, and there can be no question of any chemical action of the free alkali in its case. Yet another argument against the theory is that hydrolysis is greater in cold and dilute solutions, whereas hot concentrated soap solutions are generally regarded as having the best detergent action.
Rotondi (Journ. Soc. Chem. Ind., 1885, 601) was of the opinion that the basic soap, which he believed to be formed by hydrolysis, was alone responsible for the detergent action of soap, this basic soap dissolving fatty matter by saponification, but, as already pointed out, his theory of the formation of a basic soap is now known to be incorrect, and his conclusions are therefore invalid.
Several explanations have been suggested, based on the purely physical properties of soap solutions. Most of these are probably, at any rate in part, correct, and there can be little doubt that the ultimate solution of the problem lies in this direction, and that the detergent action of soap will be found to depend on many of these properties, together with other factors not yet known.
Jevons in 1878 in some researches on the "Brownian movement" or "pedesis" of small particles, a movement of the particles which is observed to take place when clay, iron oxide, or other finely divided insoluble matter is suspended in water, found that the pedetic action was considerably increased by soap and sodium silicate, and suggested that to this action of soap might be attributed much of its cleansing power.
Alder Wright considered that the alkali liberated by hydrolysis in some way promoted contact of the water with the substance to be cleansed, and Knapp regarded the property of soap solutions themselves to facilitate contact of the water with the dirt, as one of the chief causes of the efficacy of soap as a detergent.
Another way in which it has been suggested that soap acts as a cleanser is that the soap itself or the alkali set free by hydrolysis serves as a lubricant, making the dirt less adherent, and thus promoting its removal.
The most likely theory yet advanced is that based on the emulsifying power of soap solutions. The fact that these will readily form emulsions with oils has long been known, and the detergent action of soap has frequently been attributed to it, the explanation given being that the alkali set free by the water emulsifies the fatty matter always adhering to dirt, and carries it away in suspension with the other impurities.
Experiments by Hillyer (loc. cit.) show, however, that while N/10 solution of alkali will readily emulsify a cotton-seed oil containing free acidity, no emulsion is produced with an oil from which all the acidity has been removed, or with kerosene, whereas a N/10 solution of sodium oleate will readily give an emulsion with either, thus proving that the emulsification is due to the soap itself, and not to the alkali.
Plateau (Pogg. Ann., 141, 44) and Quincke (Wiedmann's. Ann., 35,
- have made very complete researches on the emulsification and
foaming of liquids and on the formation of bubbles. The former considers that there are two properties of a liquid which play an important part in the phenomenon, (1) it must have considerable viscosity, and (2) its surface tension must be low. Quincke holds similar views, but considers that no pure liquid will foam.
Soap solution admirably fulfils Plateau's second condition, its surface tension being only about 40 per cent. of that of water, while its cohesion is also very small; and it is doubtless to this property that its emulsifying power is chiefly due. So far as viscosity is concerned, this can have but little influence, for a 1 per cent. solution of sodium oleate, which has a viscosity very little different from that of pure water, is an excellent emulsifying agent.
Hillyer, to whose work reference has already been made, investigated the whole question of detergent action very exhaustively, and, as the result of a very large number of experiments, concludes that the cleansing power of soap is largely or entirely to be explained by the power which it has of emulsifying oily substances, of wetting and penetrating into oily textures, and of lubricating texture and impurities so that these may be removed easily.
It is thought that all these properties may be explained by taking into account the low cohesion of the soap solutions, and their strong attraction or affinity to oily matter, which together cause the low surface tension between soap solution and oil.
CHAPTER II.
CONSTITUTION OF OILS AND FATS, AND THEIR SAPONIFICATION.
Researches of Chevreul and Berthelot--Mixed Glycerides--Modern
Theories of Saponification--Hydrolysis accelerated by (1) Heat
or Electricity, (2) Ferments; Castor-seed Ferment, Steapsin,
Emulsin, and (3) Chemical Reagents; Sulphuric Acid, Twitchell's
Reagent, Hydrochloric Acid, Lime, Magnesia, Zinc Oxide, Soda
and Potash.
The term oil is of very wide significance, being applied to substances of vastly different natures, both organic and inorganic, but so far as soap-making materials are concerned, it may be restricted almost entirely to the products derived from animal and vegetable sources, though many attempts have been made during the last few years to also utilise mineral oils for the preparation of soap. Fats readily become oils on heating beyond their melting points, and may be regarded as frozen oils.
Although Scheele in 1779 discovered that in the preparation of lead plaster glycerol is liberated, soap at that time was regarded as a mere mechanical mixture, and the constitution of oils and fats was not properly understood. It was Chevreul who showed that the manufacture of soap involved a definite chemical decomposition of the oil or fat into fatty acid and glycerol, the fatty acid combining with soda, potash, or other base, to form the soap, and the glycerol remaining free. The reactions with stearin and palmitin (of which tallow chiefly consists) and with olein (found largely in olive and cotton-seed oils) are as follows:--
CH_{2}OOC_{18}H_{35} CH_{2}OH
| |
CHOOC_{18}H_{35} + 3NaOH = 3NaOOC_{18}H_{35} + CHOH
| |
CH_{2}OOC_{18}H_{35} CH_{2}OH
stearin sodium sodium glycerol
hydroxide stearate
CH_{2}OOC_{16}H_{31} CH_{2}OH
| |
CHOOC_{16}H_{31} + 3NaOH = 3NaOOC_{16}H_{31} + CHOH
| |
CH_{2}OOC_{16}H_{31} CH_{2}OH
palmitin sodium sodium glycerol
hydroxide palmitate
CH_{2}OOC_{18}H_{33} CH_{2}OH
| |
CHOOC_{18}H_{33} + 3NaOH = 3NaOOC_{18}H_{33} + CHOH
| |
CH_{2}OOC_{18}H_{33} CH_{2}OH
olein sodium sodium glycerol
hydroxide oleate
Berthelot subsequently confirmed Chevreul's investigations by directly synthesising the fats from fatty acids and glycerol, the method he adopted consisting in heating the fatty acids with glycerol in sealed tubes. Thus, for example:--
3C_{18}H_{35}O_{2}H + C_{3}H_{5}(OH){3} = C{3}H_{5}(C_{18}H_{35}O_{2})_{3}
stearic acid glycerol tristearin
Since glycerol is a trihydric alcohol, i.e., contains three hydroxyl (OH) groups, the hydrogen atoms of which are displaceable by acid radicles, the above reaction may be supposed to take place in three stages. Thus, we may have:--
(1) C_{18}H_{35}O_{2}H + C_{3}H_{5}(OH){3} =
C{3}H_{5}(OH){2}C{18}H_{35}O_{2} + H_{2}O
monostearin
(2) C_{18}H_{35}O_{2}H + C_{3}H_{5}(OH){2}C{18}H_{35}O_{2} =
C_{3}H_{5}(OH)(C_{18}H_{35}O_{2}){2} + H{2}O
distearin
(3) C_{18}H_{35}O_{2}H + C_{3}H_{5}(OH)(C_{18}H_{35}O_{2}){2} =
C{3}H_{5}(C_{18}H_{35}O_{2}){3} + H{2}O
tristearin
There are two possible forms of monoglyceride and diglyceride, according to the relative position of the acid radicle, these being termed alpha and beta respectively, and represented by the following formulæ, where R denotes the acid radicle:--
Monoglyceride:--
CH_{2}OR CH_{2}OH
| |
(alpha) CHOH and (beta) CHOR
| |
CH_{2}OH CH_{2}OH
Diglyceride:--
CH_{2}OR CH_{2}OR
| |
(alpha) CHOH and (beta) CHOR
| |
## CH_{2}OR CH_{2}OH
According to the relative proportions of fatty acid and glycerol used, and the temperature to which they were heated, Berthelot succeeded in preparing mono-, di- and triglycerides of various fatty acids.
Practically all the oils and fats used in soap-making consist of mixtures of these compounds of glycerol with fatty acids, which invariably occur in nature in the form of triglycerides.
It was formerly considered that the three acid radicles in any naturally occurring glyceride were identical, corresponding to the formula--
CH_{2}OR
|
## CHOR
|
## CH_{2}OR
where R denotes the acid radicle. Recent work, however, has shown the existence of several so-called mixed glycerides, in which the hydroxyls of the same molecule of glycerol are displaced by two or sometimes three different acid radicles.
The first mixed glyceride to be discovered was oleodistearin, C_{3}H_{5}(OC_{18}H_{35}O)(OC_{18}H_{35}O){2}, obtained by Heise in 1896 Mkani fat. Hansen has since found that tallow contains oleodipalmitin, from C{3}H_{5}(OC_{18}H_{35}O)(OC_{16}H_{31}O), stearodipalmitin, C_{3}H_{5}(OC_{18}H_{35}O)(OC_{16}H_{31}O), oleopalmitostearin,
C_{3}H_{5}(OC_{18}H_{33}O)(OC_{16}H_{31}O)(OC_{18}H_{35}O) and
palmitodistearin, CH(OC_{16}H_{31}O)(OC_{18}H_{35}O){2}, the latter of which has also been obtained by Kreis and Hafner from lard, while Holde and Stange have shown that olive oil contains from 1 to 2 per cent. of oleodidaturin, C{3}H_{5}(OC_{18}H_{33}O)(OC_{17}H_{33}O)_{2}, and Hehner and Mitchell have obtained indications of mixed glycerides in linseed oil (which they consider contains a compound of glycerol with two radicles of linolenic acid and one radicle of oleic acid), also in cod-liver, cod, whale and shark oils.
In some cases the fatty acids are combined with other bases than glycerol. As examples may be cited beeswax, containing myricin or myricyl palmitate, and spermaceti, consisting chiefly of cetin or cetyl palmitate, and herein lies the essential difference between fats and waxes, but as these substances are not soap-making materials, though sometimes admixed with soap to accomplish some special object, they do not require further consideration.
The principal pure triglycerides, with their formulæ and chief constants, are given in the following table:--
[Transcriber's note: Table split to fit on page better.]
--------------------------------------------------------------------- Glyceride. | Formula. | Chief Occurrence. --------------------------------------------------------------------- Butyrin | C_{3}H_{5}(O.C_{4}H_{7}O){3} | Butter fat --------------------------------------------------------------------- Isovalerin | C{3}H_{5}(O.C_{5}H_{9}O){3} | Porpoise, dolphin --------------------------------------------------------------------- Caproin | C{3}H_{5}(O.C_{6}H_{11}O){3} | Cocoa-nut and | | palm-nut oils --------------------------------------------------------------------- Caprylin | C{3}H_{5}(O.C_{8}H_{15}O){3} | Do. do. --------------------------------------------------------------------- Caprin | C{3}H_{5}(O.C_{10}H_{19}O){3} | Do. do. --------------------------------------------------------------------- Laurin | C{3}H_{5}(O.C_{12}H_{23}O){3} | Do. do. --------------------------------------------------------------------- Myristin | C{3}H_{5}(O.C_{14}H_{27}O){3} | Nutmeg butter --------------------------------------------------------------------- Palmitin | C{3}H_{5}(O.C_{16}H_{31}O){3} | Palm oil, lard --------------------------------------------------------------------- Stearin | C{3}H_{5}(O.C_{18}H_{35}O){3} | Tallow, lard, | | cacao butter --------------------------------------------------------------------- Olein | C{3}H_{5}(O.C_{18}H_{33}O){3} | Olive and | | almond oils --------------------------------------------------------------------- Ricinolein | C{3}H_{5}(O.C_{18}H_{33}O_{2})_{3} | Castor oil ---------------------------------------------------------------------
--------------------------------------------------------------------- Glyceride. | Melting | Refractive | Saponification | Point, °C. | Index at 60° C. | Equivalent. --------------------------------------------------------------------- Butyrin | Liquid at -60 | 1.42015 | 100.7 --------------------------------------------------------------------- Isovalerin | ... | ... | 114.7 --------------------------------------------------------------------- Caproin | -25 | 1.42715 | 128.7 --------------------------------------------------------------------- Caprylin | -8.3 | 1.43316 | 156.7 --------------------------------------------------------------------- Caprin | 31.1 | 1.43697 | 184.7 --------------------------------------------------------------------- Laurin | 45 | 1.44039 | 212.7 --------------------------------------------------------------------- Myristin | 56.5 | 1.44285 | 240.7 --------------------------------------------------------------------- Palmitin | 63-64 | ... | 268.7 --------------------------------------------------------------------- Stearin | 71.6 | ... | 296.7 --------------------------------------------------------------------- Olein | Solidifies at -6 | ... | 294.7 --------------------------------------------------------------------- Ricinolein | ... | ... | 310.7 ---------------------------------------------------------------------
Of the above the most important from a soap-maker's point of view are stearin, palmitin, olein and laurin, as these predominate in the fats and oils generally used in that industry. The presence of stearin and palmitin, which are solid at the ordinary temperature, gives firmness to a fat; the greater the percentage present, the harder the fat and the higher will be the melting point, hence tallows and palm oils are solid, firm fats. Where olein, which is liquid, is the chief constituent, we have softer fats, such as lard, and liquid oils, as almond, olive and cotton-seed.
Stearin (Tristearin) can be prepared from tallow by crystallisation from a solution in ether, forming small crystals which have a bright pearly lustre. The melting point of stearin appears to undergo changes and suggests the existence of distinct modifications. When heated to 55° C. stearin liquefies; with increase of temperature it becomes solid, and again becomes liquid at 71.6° C. If this liquid be further heated to 76° C., and allowed to cool, it will not solidify until 55° C. is reached, but if the liquid at 71.6° C. be allowed to cool, solidification will occur at 70° C.
Palmitin (Tripalmitin) may be obtained by heating together palmitic acid and glycerol, repeatedly boiling the resulting product with strong alcohol, and allowing it to crystallise. Palmitin exists in scales, which have a peculiar pearly appearance, and are greasy to the touch.
After melting and solidifying, palmitin shows no crystalline fracture; when heated to 46° C. it melts to a liquid which becomes solid on further heating, again liquefying when 61.7° C. is reached, and becoming cloudy, with separation of crystalline particles. At 63° C. it is quite clear, and this temperature is taken as the true melting point. It has been suggested that the different changes at the temperatures mentioned are due to varying manipulation, such as rate at which the temperature is raised, and the initial temperature of the mass when previously cool.
Olein (Triolein) is an odourless, colourless, tasteless oil, which rapidly absorbs oxygen and becomes rancid. It has been prepared synthetically by heating glycerol and oleic acid together, and may be obtained by submitting olive oil to a low temperature for several days, when the liquid portion may be further deprived of any traces of stearin and palmitin by dissolving in alcohol. Olein may be distilled in vacuo without decomposition taking place.
Laurin (Trilaurin) may be prepared synthetically from glycerol and lauric acid. It crystallises in needles, melting at 45°-46° C., which are readily soluble in ether, but only slightly so in cold absolute alcohol. Scheij gives its specific gravity, _d_60°/4° = 0.8944. Laurin is the chief constituent of palm-kernel oil, and also one of the principal components of cocoa-nut oil.
Fatty Acids.--When a fat or oil is saponified with soda or potash, the resulting soap dissolved in hot water, and sufficient dilute sulphuric acid added to decompose the soap, an oily layer gradually rises to the surface of the liquid, which, after clarifying by warming and washing free from mineral acid, is soluble in alcohol and reddens blue litmus paper.
This oily layer consists of the "fatty acids" or rather those insoluble in water, acids like acetic, propionic, butyric, caproic, caprylic and capric, which are all more or less readily soluble in water, remaining for the most part dissolved in the aqueous portion. All the acids naturally present in oils and fats, whether free or combined, are monobasic in character, that is to say, contain only one carboxyl--CO.OH group.
The more important fatty acids may be classified according to their chemical constitution into five homologous series, having the general formulæ:--
I. Stearic series C_{n}H_{2n+1}COOH
II. Oleic series C_{n}H_{2n-1}COOH
III. Linolic series C_{n}H_{2n-3}COOH
IV. Linolenic series C_{n}H_{2n-5}COOH
V. Ricinoleic series C_{n}H_{2n-7}COOH
I. Stearic Series.--The principal acids of this series, together with their melting points and chief sources, are given in the following table:--
------------------------------------------------------------------------------- Acid. | Formula. | Melting | Found in | | Point, |
| | °C. |
------------------------------------------------------------------------------- Acetic | CH_{3}COOH | 17 | Macassar oil. ------------------------------------------------------------------------------ Butyric | C_{3}H_{7}COOH | ... | Butter, Macassar oil. ------------------------------------------------------------------------------ Isovaleric | C_{4}H_{9}COOH | ... | Porpoise and dolphin oils. ------------------------------------------------------------------------------ Caproic | C_{5}H_{11}COOH | ... | Butter, cocoa-nut oil. ------------------------------------------------------------------------------ Caprylic | C_{7}H_{15}COOH | 15 | Butter, cocoa-nut oil, | | | Limburg cheese. ------------------------------------------------------------------------------ Capric | C_{9}H_{19}COOH | 30 | Butter, cocoa-nut oil. ------------------------------------------------------------------------------ Lauric | C_{11}H_{23}COOH | 44 | Cocoa-nut oil, palm-kernel oil. ------------------------------------------------------------------------------ Ficocerylic | C_{12}H_{25}COOH | ... | Pisang wax. ------------------------------------------------------------------------------ Myristic | C_{13}H_{27}COOH | 54 | Nutmeg butter, liver fat, | | | cocoa-nut oil, dika fat, | | | croton oil. ------------------------------------------------------------------------------ Palmitic | C_{15}H_{31}COOH | 62.5 | Palm oil, most animal fats. ------------------------------------------------------------------------------ Daturic | C_{16}H_{33}COOH | | Oil of Datura Stramonium. ------------------------------------------------------------------------------ Stearic | C_{17}H_{35}COOH | 69 | Tallow, lard, most solid | | | animal fats. ------------------------------------------------------------------------------ Arachidic | C_{19}H_{39}COOH | 75 | Arachis or earth-nut oil, | | | rape and mustard-seed oils. ------------------------------------------------------------------------------ Behenic | C_{21}H_{43}COOH | ... | Ben oil, black mustard-seed | | | oil, rape oil. ------------------------------------------------------------------------------ Lignoceric | C_{23}H_{47}COOH | 80.5 | Arachis oil. ------------------------------------------------------------------------------ Carnaubic | C_{23}H_{47}COOH | ... | Carnauba wax. ------------------------------------------------------------------------------ Pisangcerylic | C_{23}H_{47}COOH | ... | Pisang wax. ------------------------------------------------------------------------------ Hyænic | C_{24}H_{49}COOH | ... | Hyæna fat. ------------------------------------------------------------------------------ Cerotic | C_{25}H_{51}COOH | 78 | Beeswax, China wax, spermaceti. ------------------------------------------------------------------------------ Melissic | C_{29}H_{59}COOH | 89 | Beeswax. ------------------------------------------------------------------------------ Psyllostearylic| C_{32}H_{65}COOH | ... | Psylla wax. ------------------------------------------------------------------------------ Theobromic | C_{63}H_{127}COOH | ... | Cacao butter ------------------------------------------------------------------------------
Medullic and margaric acids, which were formerly included in this series, have now been shown to consist of mixtures of stearic and palmitic, and stearic palmitic and oleic acids respectively.
The acids of this group are saturated compounds, and will not combine directly with iodine or bromine. The two first are liquid at ordinary temperatures, distil without decomposition, and are miscible with water in all proportions; the next four are more or less soluble in water and distil unchanged in the presence of water, as does also lauric acid, which is almost insoluble in cold water, and only slightly dissolved by boiling water. The higher acids of the series are solid, and are completely insoluble in water. All these acids are soluble in warm alcohol, and on being heated with solid caustic alkali undergo no change.
II. Oleic Series:--
-------------------------------------------------------------------------- Acid. | Formula. | Melting | Found in | | Point, |
| | °C. |
-------------------------------------------------------------------------- Tiglic | C_{4}H_{7}COOH | 64.5 | Croton oil. -------------------------------------------------------------------------- Moringic | C_{14}H_{27}COOH | 0 | Ben oil. -------------------------------------------------------------------------- Physetoleic | C_{15}H_{29}COOH | 30 | Sperm oil. -------------------------------------------------------------------------- Hypogæic | C_{15}H_{29}COOH | 33 | Arachis and maize oils. -------------------------------------------------------------------------- Oleic | C_{17}H_{33}COOH | 14 | Most oils and fats. -------------------------------------------------------------------------- Rapic | C_{17}H_{33}COOH | ... | Rape oil. -------------------------------------------------------------------------- Doeglic | C_{18}H_{35}COOH | ... | Bottle-nose oil. -------------------------------------------------------------------------- Erucic | C_{21}H_{41}COOH | 34 | Mustard oils, marine animal | | | oils, rape oil. --------------------------------------------------------------------------
The unsaturated nature of these acids renders their behaviour with various reagents entirely different from that of the preceding series.
Thus, they readily combine with bromine or iodine to form addition compounds, and the lower members of the series are at once reduced, on treatment with sodium amalgam in alkaline solution, to the corresponding saturated acids of Series I. Unfortunately, this reaction does not apply to the higher acids such as oleic acid, but as the conversion of the latter into solid acids is a matter of some technical importance from the point of view of the candle-maker, a number of attempts have been made to effect this by other methods.
De Wilde and Reychler have shown that by heating oleic acid with 1 per cent. of iodine in autoclaves up to 270°-280° C., about 70 per cent. is converted into stearic acid, and Zürer has devised (German Patent 62,407) a process whereby the oleic acid is first converted by the action of chlorine into the dichloride, which is then reduced with nascent hydrogen. More recently Norman has secured a patent (English Patent 1,515, 1903) for the conversion of unsaturated fatty acids of Series II. into the saturated compounds of Series I., by reduction with hydrogen or water-gas in the presence of finely divided nickel, cobalt or iron.
It is claimed that by this method oleic acid is completely transformed into stearic acid, and that the melting point of tallow fatty acids is raised thereby about 12° C.
Another method which has been proposed is to run the liquid olein over a series of electrically charged plates, which effects its reduction to stearin.
Stearic acid is also formed by treating oleic acid with fuming hydriodic acid in the presence of phosphorus, while other solid acids are obtained by the action of sulphuric acid or zinc chloride on oleic acid.
Acids of Series II. may also be converted into saturated acids by heating to 300°C. with solid caustic potash, which decomposes them into acids of the stearic series with liberation of hydrogen. This reaction, with oleic acid, for example, is generally represented by the equation--
C_{18}H_{34}O_{2} + 2KOH = KC_{2}H_{3}O_{2} + KC_{16}H_{31}O_{2} + H_{2},
though it must be really more complex than this indicates, for, as Edmed has pointed out, oxalic acid is also formed in considerable quantity.
The process on a commercial scale has now been abandoned.
One of the most important properties of this group of acids is the formation of isomeric acids of higher melting point on treatment with nitrous acid, generally termed the elaidin reaction. Oleic acid, for example, acted upon by nitrous acid, yields elaidic acid, melting at 45°, and erucic acid gives brassic acid, melting at 60°C. This reaction also occurs with the neutral glycerides of these acids, olein being converted into elaidin, which melts at 32°C.
The lead salts of the acids of this series are much more soluble in ether, and the lithium salts more soluble in alcohol than those of the stearic series, upon both of which properties processes have been based for the separation of the solid from the liquid fatty acids.
III. Linolic Series:--
-------------------------------------------------------------------------- Acid. | Formula. | Melting | Found in | | Point, |
| | °C. |
-------------------------------------------------------------------------- Elæomargaric | C_{16}H_{29}COOH | ... | Chinese-wood oil. -------------------------------------------------------------------------- Elæostearic | C_{16}H_{29}COOH | 71 | Chinese-wood oil. -------------------------------------------------------------------------- Linolic | C_{17}H_{31}COOH | Fluid | Linseed, cotton-seed and | | | maize oils. -------------------------------------------------------------------------- Tariric | C_{17}H_{31}COOH | 50.5 | Tariri-seed oil. -------------------------------------------------------------------------- Telfairic | C_{17}H_{31}COOH | Fluid | Telfairia oil. --------------------------------------------------------------------------
These acids readily combine with bromine, iodine, or oxygen. They are unaffected by nitrous acid, and their lead salts are soluble in ether.
IV. Linolenic Series:--
-------------------------------------------------------------------- Acid. | Formula. | Found in -------------------------------------------------------------------- Linolenic | C_{17}H_{29}COOH | Linseed oil. -------------------------------------------------------------------- Isolinolenic | C_{17}H_{29}COOH | Linseed oil. -------------------------------------------------------------------- Jecoric | C_{17}H_{29}COOH | Cod-liver and marine animal oils. --------------------------------------------------------------------
These acids are similar in properties to those of Class III., but combine with six atoms of bromine or iodine, whereas the latter combine with only four atoms.
V. Ricinoleic Series:--
----------------------------------------------------------- | | | | | | Acid. | Formula. | Melting | Found in | | | | Point, | |
| | | °C. | |
|------------|----------------------|---------|-------------| | | | | | | Ricinoleic | C_{17}H_{22}(OH)COOH | 4-5 | Castor oil. | -----------------------------------------------------------
This acid combines with two atoms of bromine or iodine, and is converted by nitrous acid into the isomeric ricinelaidic acid, which melts at 52°-53° C. Pure ricinoleic acid, obtained from castor oil, is optically active, its rotation being [alpha]_{d} +6° 25'.
Hydrolysis or Saponification of Oils and Fats.--The decomposition of a triglyceride, brought about by caustic alkalies in the formation of soap, though generally represented by the equation already given (pp. 6 and 7)--
C_{3}H_{5}(OR) + 3NaOH = C_{3}H_{5}(OH)_{3} + 3RONa,
is not by any means such a simple reaction.
In the first place, though in this equation no water appears, the presence of the latter is found to be indispensable for saponification to take place; in fact, the water must be regarded as actually decomposing the oil or fat, caustic soda or potash merely acting as a catalytic agent. Further, since in the glycerides there are three acid radicles to be separated from glycerol, their saponification can be supposed to take place in three successive stages, which are the converse of the formation of mono- and diglycerides in the synthesis of triglycerides from fatty acids and glycerine. Thus, the above equation may be regarded as a summary of the following three:--
## | OR | OH
(i.) C_{3}H_{5} | OR + NaOH = C_{3}H_{5} | OR + RONa
## |_OR |OR
| OH | OH
(ii.) C{3}H_{5} | OR + NaOH = C_{3}H_{5} | OR + RONa
## |_OR |OH
## | OH | OH
(iii.) C{3}H_{5} | OR + NaOH = C_{3}H_{5} | OH + RONa
## |_OH |_OH
Geitel and Lewkowitsch, who have studied this question from the physical and chemical point of view respectively, are of opinion that when an oil or fat is saponified, these three reactions do actually occur side by side, the soap-pan containing at the same time unsaponified triglyceride, diglyceride, monoglyceride, glycerol and soap.
This theory is not accepted, however, by all investigators. Balbiano and Marcusson doubt the validity of Lewkowitsch's conclusions, and Fanto, experimenting on the saponification of olive oil with caustic potash, is unable to detect the intermediate formation of any mono- or diglyceride, and concludes that in homogeneous solution the saponification is practically quadrimolecular. Kreeman, on the other hand, from physico-chemical data, supports the view of Geitel and Lewkowitsch that saponification is bimolecular, and though the evidence seems to favour this theory, the matter cannot be regarded as yet definitely settled.
Hydrolysis can be brought about by water alone, if sufficient time is allowed, but as the process is extremely slow, it is customary in practice to accelerate the reaction by the use of various methods, which include (i.) the application of heat or electricity, (ii.) action of enzymes, and (iii.) treatment with chemicals; the accelerating effect of the two latter methods is due to their emulsifying power.
The most usual method adopted in the manufacture of soap is to hydrolyse the fat or oil by caustic soda or potash, the fatty acids liberated at the same time combining with the catalyst, i.e., soda or potash, to form soap. Hitherto the other processes of hydrolysis have been employed chiefly for the preparation of material for candles, for which purpose complete separation of the glycerol in the first hydrolysis is not essential, since the fatty matter is usually subjected to a second treatment with sulphuric acid to increase the proportion of solid fatty acids. The colour of the resulting fatty acids is also of no importance, as they are always subjected to distillation.
During the last few years, however, there has been a growing attempt to first separate the glycerol from the fatty acids, and then convert the latter into soap by treatment with the carbonates of soda or potash, which are of course considerably cheaper than the caustic alkalies, but cannot be used in the actual saponification of a neutral fat. The two processes chiefly used for this purpose are those in which the reaction is brought about by enzymes or by Twitchell's reagent.
I. Application of Heat or Electricity.--Up to temperatures of 150° C. the effect of water on oils and fats is very slight, but by passing superheated steam through fatty matter heated to 200°-300° C. the neutral glycerides are completely decomposed into glycerol and fatty acids according to the equation--
C_{3}H_{5}(OR){3} + 3H.OH = C{3}H_{5}(OH)_{3} + 3ROH.
The fatty acids and glycerol formed distil over with the excess of steam, and by arranging a series of condensers, the former, which condense first, are obtained almost alone in the earlier ones, and an aqueous solution of glycerine in the later ones. This method of preparation of fatty acids is extensively used in France for the production of stearine for candle-manufacture, but the resulting product is liable to be dark coloured, and to yield a dark soap. To expose the acids to heat for a minimum of time, and so prevent discoloration, Mannig has patented (Germ. Pat.
160,111) a process whereby steam under a pressure of 8 to 10 atmospheres is projected against a baffle plate mounted in a closed vessel, where it mixes with the fat or oil in the form of a spray, the rate of hydrolysis being thereby, it is claimed, much increased.
Simpson (Fr. Pat. 364,587) has attempted to accelerate further the decomposition by subjecting oils or fats to the simultaneous action of heat and electricity. Superheated steam is passed into the oil, in which are immersed the two electrodes connected with a dynamo or battery, the temperature not being allowed to exceed 270° C.
II. Action of Enzymes.--It was discovered by Muntz in 1871 (Annales de Chemie, xxii.) that during germination of castor seeds a quantity of fatty acid was developed in the seeds, which he suggested might be due to the decomposition of the oil by the embryo acting as a ferment.
Schutzenberger in 1876 showed that when castor seeds are steeped in water, fatty acids and glycerol are liberated, and attributed this to the hydrolytic action of an enzyme present in the seeds. No evidence of the existence of such a ferment was adduced, however, till 1890, when Green (Roy. Soc. Proc., 48, 370) definitely proved the presence in the seeds of a ferment capable of splitting up the oil into fatty acid and glycerol.
The first experimenters to suggest any industrial application of this enzymic hydrolysis were Connstein, Hoyer and Wartenburg, who (Berichte, 1902, 35, pp. 3988-4006) published the results of a lengthy investigation of the whole subject. They found that tallow, cotton-seed, palm, olive, almond, and many other oils, were readily hydrolysed by the castor-seed ferment in the presence of dilute acid, but that cocoa-nut and palm-kernel oils only decomposed with difficulty.
The presence of acidity is essential for the hydrolysis to take place, the most suitable strength being one-tenth normal, and the degree of hydrolysis is proportional to the quantity of ferment present. Sulphuric, phosphoric, acetic or butyric acids, or sodium bisulphate, may be used without much influence on the result. Butyric acid is stated to be the best, but in practice is too expensive, and acetic acid is usually adopted.
The emulsified mixture should be allowed to stand for twenty-four hours, and the temperature should not exceed 40° C.; at 50° C. the action is weakened, and at 100° C. ceases altogether.
Several investigators have since examined the hydrolysing power of various other seeds, notably Braun and Behrendt (Berichte, 1903, 36, 1142-1145, 1900-1901, and 3003-3005), who, in addition to confirming Connstein, Hoyer and Wartenburg's work with castor seeds, have made similar experiments with jequirity seeds (Abrus peccatorius) containing the enzyme abrin, emulsin from crushed almonds, the leaves of Arctostaphylos Uva Ursi, containing the glucoside arbutin, myrosin from black mustard-seed, gold lac (Cheirantus cheiri) and crotin from croton seeds.
Jequirity seeds were found to have a stronger decomposing action on lanoline and carnauba wax than the castor seed, but only caused decomposition of castor oil after the initial acidity was first neutralised with alkali. Neither emulsin, arbutin nor crotin have any marked hydrolytic action on castor oil, but myrosin is about half as active as castor seeds, except in the presence of potassium myronate, when no decomposition occurs.
S. Fokin (J. russ. phys. chem. Ges., 35, 831-835, and Chem. Rev.
Fett. u. Harz. Ind., 1904, 30 et seq.) has examined the hydrolytic action of a large number of Russian seeds, belonging to some thirty different families, but although more than half of these brought about the hydrolysis of over 10 per cent. of fat, he considers that in only two cases, viz., the seeds of Chelidonium majus and Linaria vulgaris, is the action due to enzymes, these being the only two seeds for which the yield of fatty acids is proportional to the amount of seed employed, while in many instances hydrolysis was not produced when the seeds were old.
The seeds of Chelidonium majus were found to have as great, and possibly greater, enzymic activity than castor seeds, but those of Linaria are much weaker, twenty to thirty parts having only the same lipolytic activity as four to five parts of castor seeds.
The high percentage of free acids found in rice oil has led C. A. Brown, jun. (Journ. Amer. Chem. Soc., 1903, 25, 948-954), to examine the rice bran, which proves to have considerable enzymic activity, and rapidly effects the hydrolysis of glycerides.
The process for the utilisation of enzymic hydrolysis in the separation of fatty acids from glycerine on the industrial scale, as originally devised by Connstein and his collaborators, consisted in rubbing a quantity of the coarsely crushed castor seeds with part of the oil or fat, then adding the rest of the oil, together with acidified water (N/10 acetic acid). The quantities employed were 6-1/2 parts of decorticated castor beans for every 100 parts of oil or fat, and 50 to 60 parts of acetic acid.
After stirring until an emulsion is formed, the mixture is allowed to stand for twenty-four hours, during which hydrolysis takes place. The temperature is then raised to 70°-80° C., which destroys the enzyme, and a 25 per cent. solution of sulphuric acid, equal in amount to one-fiftieth of the total quantity of fat originally taken, added to promote separation of the fatty acids.
In this way three layers are formed, the one at the top consisting of the clear fatty acids, the middle one an emulsion containing portions of the seeds, fatty acids and glycerine, and the bottom one consisting of the aqueous glycerine. The intermediate layer is difficult to treat satisfactorily; it is generally washed twice with water, the washings being added to glycerine water, and the fatty mixture saponified and the resultant soap utilised.
The process has been the subject of a considerable amount of investigation, numerous attempts having been made to actually separate the active fat-splitting constituent of the seeds, or to obtain it in a purer and more concentrated form than is furnished by the seeds themselves. Nicloux (Comptes Rendus, 1904, 1112, and Roy. Soc.
Proc., 1906, 77 B, 454) has shown that the hydrolytic activity of castor seeds is due entirely to the cytoplasm, which it is possible to separate by mechanical means from the aleurone grains and all other cellular matter. This active substance, which he terms "lipaseidine," is considered to be not an enzyme, though it acts as such, following the ordinary laws of enzyme action; its activity is destroyed by contact with water in the absence of oil. This observer has patented (Eng. Pat.
8,304, 1904) the preparation of an "extract" by triturating crushed castor or other seeds with castor oil, filtering the oily extract, and subjecting it to centrifugal force. The deposit consists of aleurone and the active enzymic substance, together with about 80 per cent. of oil, and one part of it will effect nearly complete hydrolysis of 100 parts of oil in twenty-four hours. In a subsequent addition to this patent, the active agent is separated from the aleurone by extraction with benzene and centrifugal force.
By the use of such an extract, the quantity of albuminoids brought into contact with the fat is reduced to about 10 per cent. of that in the original seeds, and the middle layer between the glycerine solution and fatty acids is smaller and can be saponified directly for the production of curd soap, while the glycerine solution also is purer.
In a further patent Nicloux (Fr. Pat. 349,213, 1904) states that the use of an acid medium is unnecessary, and claims that even better results are obtained by employing a neutral solution of calcium sulphate containing a small amount of magnesium sulphate, the proportion of salts not exceeding 0.5 per cent. of the fat, while in yet another patent, jointly with Urbain (Fr. Pat. 349,942, 1904), it is claimed that the process is accelerated by the removal of acids from the oil or fat to be treated, which may be accomplished by either washing first with acidulated water, then with pure water, or preferably by neutralising with carbonate of soda and removing the resulting soap.
Lombard (Fr. Pat. 350,179, 1904) claims that acids act as stimulating agents in the enzymic hydrolysis of oils, and further that a simple method of obtaining the active product is to triturate oil cake with its own weight of water, allow the mixture to undergo spontaneous proteolytic hydrolysis at 40° C. for eight days, and then filter, the filtrate obtained being used in place of water in the enzymic process.
Hoyer, who has made a large number of experiments in the attempt to isolate the lipolytic substance from castor seeds, has obtained a product of great activity, which he terms "ferment-oil," by extracting the crushed seeds with a solvent for oils.
The Verein Chem. Werke have extended their original patent (addition dated 11th December, 1905, to Fr. Pat. 328,101, Oct., 1902), which now covers the use of vegetable ferments in the presence of water and manganese sulphate or other metallic salt. It is further stated that acetic acid may be added at the beginning of the operation, or use may be made of that formed during the process, though in the latter case hydrolysis is somewhat slower.
Experiments have been carried out by Lewkowitsch and Macleod (Journ.
Soc. Chem. Ind., 1903, 68, and Proc. Roy. Soc., 1903, 31) with ferments derived from animal sources, viz., lipase from pig's liver, and steapsin from the pig or ox pancreas. The former, although it has been shown by Kastle and Loevenhart (Amer. Chem. Journ., 1900, 49) to readily hydrolyse ethyl butyrate, is found to have very little fat-splitting power, but with steapsin more favourable results have been obtained, though the yield of fatty acids in this case is considerably inferior to that given by castor seeds.
With cotton-seed oil, 83-86 per cent. of fatty acids were liberated as a maximum after fifty-six days, but with lard only 46 per cent. were produced in the same time. Addition of dilute acid or alkali appeared to exert no influence on the decomposition of the cotton-seed oil, but in the case of the lard, dilute alkali seemed at first to promote hydrolysis, though afterwards to retard it.
Fokin (Chem. Rev. Fett. u. Harz. Ind., 1904, 118-120 et seq.) has attempted to utilise the pancreatic juice on a technical scale, but the process proved too slow and too costly to have any practical use.
Rancidity.--The hydrolysing power of enzymes throws a good deal of light on the development of rancidity in oils and fats, which is now generally regarded as due to the oxidation by air in the presence of light and moisture of the free fatty acids contained by the oil or fat.
It has long been known that whilst recently rendered animal fats are comparatively free from acidity, freshly prepared vegetable oils invariably contain small quantities of free fatty acid, and there can be no doubt that this must be attributed to the action of enzymes contained in the seeds or fruit from which the oils are expressed, hence the necessity for separating oils and fats from adhering albuminous matters as quickly as possible.
Decomposition of Fats by Bacteria.--Though this subject is not of any practical interest in the preparation of fatty acids for soap-making, it may be mentioned, in passing, that some bacteria readily hydrolyse fats.
Schriber (Arch. f. Hyg., 41, 328-347) has shown that in the presence of air many bacteria promote hydrolysis, under favourable conditions as to temperature and access of oxygen, the process going beyond the simple splitting up into fatty acid and glycerol, carbon dioxide and water being formed. Under anærobic conditions, however, only a slight primary hydrolysis was found to take place, though according to Rideal (Journ.
Soc. Chem. Ind., 1903, 69) there is a distinct increase in the amount of free fatty acids in a sewage after passage through a septic tank.
Experiments have also been made on this subject by Rahn (Centralb.
Bakteriol, 1905, 422), who finds that Penicillium glaucum and other penicillia have considerable action on fats, attacking the glycerol and lower fatty acids, though not oleic acid. A motile bacillus, producing a green fluorescent colouring matter, but not identified, had a marked hydrolytic action and decomposed oleic acid. The name "lipobacter" has been proposed by De Kruyff for bacteria which hydrolyse fats.
III. Use of Chemical Reagents.--Among the chief accelerators employed in the hydrolysis of oils are sulphuric acid and Twitchell's reagent (benzene- or naphthalene-stearosulphonic acid), while experiments have also been made with hydrochloric acid (Journ. Soc. Chem. Ind., 1903,
- with fairly satisfactory results, and the use of sulphurous acid, or
an alkaline bisulphite as catalyst, has been patented in Germany. To this class belong also the bases, lime, magnesia, zinc oxide, ammonia, soda and potash, though these latter substances differ from the former in that they subsequently combine with the fatty acids liberated to form soaps.
Sulphuric Acid.--The hydrolysing action of concentrated sulphuric acid upon oils and fats has been known since the latter part of the eighteenth century, but was not applied on a practical scale till 1840 when Gwynne patented a process in which sulphuric acid was used to liberate the fatty acids, the latter being subsequently purified by steam distillation.
By this method, sulpho-compounds of the glyceride are first formed, which readily emulsify with water, and, on treatment with steam, liberate fatty acids, the glycerol remaining partly in the form of glycero-sulphuric acid. The process has been investigated by Fremy, Geitel, and more recently by Lewkowitsch (J. Soc. of Arts, "Cantor Lectures," 1904, 795 et seq.), who has conducted a series of experiments on the hydrolysis of tallow with 4 per cent. of sulphuric acid of varying strengths, containing from 58 to 90 per cent. sulphuric acid, H_{2}SO_{4}.
Acid of 60 per cent. or less appears to be practically useless as a hydrolysing agent, while with 70 per cent. acid only 47.7 per cent. fatty acids were developed after twenty-two hours' steaming, and with 80 and 85 per cent. acid, the maximum of 89.9 per cent. of fatty acids was only reached after fourteen and fifteen hours' steaming respectively. Using 98 per cent. acid, 93 per cent. of fatty acids were obtained after nine hours' steaming, and after another seven hours, only 0.6 per cent. more fatty acids were produced.
Further experiments have shown that dilute sulphuric acid has also scarcely any action on cotton-seed, whale, and rape oils.
According to Lant Carpenter, some 75 per cent. of solid fatty acids may be obtained from tallow by the sulphuric acid process, owing to the conversion of a considerable quantity of oleic acid into isoleic acid (vide p. 12), but in the process a considerable proportion of black pitch is obtained. C. Dreymann has recently patented (Eng. Pat. 10,466,
- two processes whereby the production of any large amount of
hydrocarbons is obviated. In the one case, after saponification with sulphuric acid, the liberated fatty acids are washed with water and treated with an oxide, carbonate, or other acid-fixing body, e.g., sodium carbonate, prior to distillation. In this way the distillate is much clearer than by the ordinary process, and is almost odourless, while the amount of unsaponifiable matter is only about 1.2 per cent.
The second method claimed consists in the conversion of the fatty acids into their methyl esters by treatment with methyl alcohol and hydrochloric acid gas, and purification of the esters by steam distillation, the pure esters being subsequently decomposed with superheated steam, in an autoclave, with or without the addition of an oxide, e.g., 0.1 per cent. zinc oxide, to facilitate their decomposition.
Twitchell's Reagent.--In Twitchell's process use is made of the important discovery that aqueous solutions of fatty aromatic sulphuric acids, such as benzene- or naphthalene-stearosulphonic acid, readily dissolve fatty bodies, thereby facilitating their dissociation into fatty acids and glycerol. These compounds are stable at 100° C., and are prepared by treating a mixture of benzene or naphthalene and oleic acid with an excess of sulphuric acid, the following reaction taking place:--
C_{6}H_{6} + C_{18}H_{34}O_{2} + H_{2}SO_{4} =
C_{6}H_{4}(SO_{3}H)C_{18}H_{35}O + H_{2}O.
On boiling the resultant product with water two layers separate, the lower one consisting of a clear aqueous solution of sulphuric acid and whatever benzene-sulphonic acid has been formed, while the upper layer, which is a viscous oil, contains the benzene-stearosulphonic acid. This, after washing first with hydrochloric acid and then rapidly with petroleum ether, and drying at 100° C. is then ready for use; the addition of a small quantity of this reagent to a mixture of fat (previously purified) and water, agitated by boiling with open steam, effects almost complete separation of the fatty acid from glycerol.
The process is generally carried out in two wooden vats, covered with closely fitting lids, furnished with the necessary draw-off cocks, the first vat containing a lead coil and the other a brass steam coil.
In the first vat, the fat or oil is prepared by boiling with 1 or 2 per cent. of sulphuric acid (141° Tw. or 60° B.) for one or two hours and allowed to rest, preferably overnight; by this treatment the fat is deprived of any dirt, lime or other impurity present. After withdrawing the acid liquor, the fat or oil is transferred to the other vat, where it is mixed with one-fifth of its bulk of water (condensed or distilled), and open steam applied.
As soon as boiling takes place, the requisite amount of reagent is washed into the vat by the aid of a little hot water through a glass funnel, and the whole is boiled continuously for twelve or even twenty-four hours, until the free fatty acids amount to 85-90 per cent.
The amount of reagent used varies with the grade of material, the smaller the amount consistent with efficient results, the better the colour of the finished product; with good material, from 1/2 to 3/4 per cent. is sufficient, but for materials of lower grade proportionately more up to 2 per cent. is required. The reaction appears to proceed better with materials containing a fair quantity of free acidity.
When the process has proceeded sufficiently far, the boiling is stopped and free steam allowed to fill the vat to obviate any discoloration of the fatty acids by contact with the air, whilst the contents of the vat settle.
The settled glycerine water, which should amount in bulk to 50 or 60 per cent. of the fatty matter taken, and have a density of 7-1/2° Tw. (5° B.), is removed to a receptacle for subsequent neutralisation with milk of lime, and, after the separation of sludge, is ready for concentration.
The fatty acids remaining in the vat are boiled with a small quantity (0.05 per cent., or 1/10 of the Twitchell reagent requisite) of commercial barium carbonate, previously mixed with a little water; the boiling may be prolonged twenty or thirty minutes, and at the end of that period the contents of the vat are allowed to rest; the water separated should be neutral to methyl-orange indicator.
It is claimed that fatty acids so treated are not affected by the air, and may be stored in wooden packages.
Hydrochloric Acid.--Lewkowitsch (Journ. Soc. Chem. Ind., 1903, 67) has carried out a number of experiments on the accelerating influence of hydrochloric acid upon the hydrolysis of oils and fats, which show that acid of a specific gravity of 1.16 has a very marked effect on most oils, cocoa-nut, cotton-seed, whale and rape oils, tallow and lard being broken up into fatty acid and glycerol to the extent of some 82-96 per cent. after boiling 100 grams of the oil or fat with 100 c.c. of acid for twenty-four hours.
The maximum amount of hydrolysis was attained with cocoa-nut oil, probably owing to its large proportion of the glycerides of volatile fatty acids. Castor oil is abnormal in only undergoing about 20 per cent. hydrolysis, but this is attributed to the different constitution of its fatty acids, and the ready formation of polymerisation products.
Experiments were also made as to whether the addition of other catalytic agents aided the action of the hydrochloric acid; mercury, copper sulphate, mercury oxide, zinc, zinc dust, aluminium chloride, nitrobenzene and aniline being tried, in the proportion of 1 per cent. The experiments were made on neutral lard and lard containing 5 per cent. of free fatty acids, but in no case was any appreciable effect produced.
So far this process has not been adopted on the practical scale, its chief drawback being the length of time required for saponification.
Undoubtedly the hydrolysis would be greatly facilitated if the oil and acid could be made to form a satisfactory emulsion, but although saponin has been tried for the purpose, no means of attaining this object has yet been devised.
Sulphurous Acid or Bisulphite.--The use of these substances has been patented by Stein, Berge and De Roubaix (Germ. Pat. 61,329), the fat being heated in contact with the reagent for about nine hours at 175°-180° C. under a pressure of some 18 atmospheres, but the process does not appear to be of any considerable importance.
Lime.--The use of lime for the saponification of oils and fats was first adopted on the technical scale for the production of candle-making material, by De Milly in 1831. The insoluble lime soap formed is decomposed by sulphuric acid, and the fatty acids steam distilled.
The amount of lime theoretically necessary to hydrolyse a given quantity of a triglyceride, ignoring for the moment any catalytic influence, can be readily calculated; thus with stearin the reaction may be represented by the equation:--
CH_{2}OOC_{18}H_{35} CH_{2}OH
| |
## 2CHOOC_{18}H_{35} + 3Ca(OH){2} = 3Ca(OOC{18}H_{35}){2} + 2CHOH
| |
## CH{2}OOC_{18}H_{35} CH_{2}OH
stearin milk of lime calcium stearate glycerol
In this instance, since the molecular weight of stearin is 890 and that of milk of lime is 74, it is at once apparent that for every 1,780 parts of stearin, 222 parts of milk of lime or 168 parts of quick-lime, CaO, would be required.
It is found in practice, however, that an excess of 3-5 per cent. above the theoretical quantity of lime is necessary to complete the hydrolysis of a fat when carried on in an open vessel at 100°-105° C., but that if the saponification be conducted under pressure in autoclaves the amount of lime necessary to secure almost perfect hydrolysis is reduced to 2-3 per cent. on the fat, the treatment of fats with 3 per cent. of lime under a pressure of 10 atmospheres producing a yield of 95 per cent. of fatty acids in seven hours. The lower the pressure in the autoclave, the lighter will be the colour of the resultant fatty acids.
Magnesia.--It has been proposed to substitute magnesia for lime in the process of saponification under pressure, but comparative experiments with lime and magnesia, using 3 per cent. of lime and 2.7 per cent. of magnesia (Journ. Soc. Chem. Ind., xii., 163), show that saponification by means of magnesia is less complete than with lime, and, moreover, the reaction requires a higher temperature and therefore tends to darken the product.
Zinc Oxide.--The use of zinc oxide as accelerating agent has been suggested by two or three observers. Poullain and Michaud, in 1882, were granted a patent for this process, the quantity of zinc oxide recommended to be added to the oil or fat being 0.2 to 0.5 per cent.
Rost, in 1903, obtained a French patent for the saponification of oils and fats by steam under pressure in the presence of finely divided metals or metallic oxides, and specially mentions zinc oxide for the purpose.
It has also been proposed to use zinc oxide in conjunction with lime in the autoclave to obviate to some extent the discoloration of the fatty acids.
Other catalytic agents have been recommended from time to time, including strontianite, lead oxide, caustic baryta, aluminium hydrate, but none of these is of any practical importance.
Soda and Potash.--Unlike the preceding bases, the soaps formed by soda and potash are soluble in water, and constitute the soap of commerce.
These reagents are always used in sufficient quantity to combine with the whole of the fatty acids contained in an oil or fat, though doubtless, by the use of considerably smaller quantities, under pressure, complete resolution of the fatty matter into fatty acids and glycerol could be accomplished. They are, by far, the most important saponifying agents from the point of view of the present work, and their practical use is fully described in Chapter V.
CHAPTER III.
RAW MATERIALS USED IN SOAP-MAKING.
Fats and Oils--Waste Fats--Fatty Acids--Less-known Oils and
Fats of Limited Use--Various New Fats and Oils Suggested for
Soap-making--Rosin--Alkali (Caustic and
Carbonated)--Water--Salt--Soap-stock.
Fats and Oils.--All animal and vegetable oils and fats intended for soap-making should be as free as possible from unsaponifiable matter, of a good colour and appearance, and in a sweet, fresh condition. The unsaponifiable matter naturally present as cholesterol, or phytosterol, ranges in the various oils and fats from 0.2 to 2.0 per cent. All oils and fats contain more or less free acidity; but excess of acidity, though it may be due to the decomposition of the glyceride, and does not always denote rancidity, is undesirable in soap-making material.
Rancidity of fats and oils is entirely due to oxidation, in addition to free acid, aldehydes and ketones being formed, and it has been proposed to estimate rancidity by determining the amount of these latter produced. It is scarcely necessary to observe how very important it is that the sampling of fats and oils should be efficiently performed, so that the sample submitted to the chemist may be a fairly representative average of the parcel.
In the following short description of the materials used, we give, under each heading, figures for typical samples of the qualities most suitable for soap-making.
Tallows.--Most of the imported tallow comes from America, Australia and New Zealand. South American mutton tallow is usually of good quality; South American beef tallow is possessed of a deep yellow colour and rather strong odour, but makes a bright soap of a good body and texture. North American tallows are, as a general rule, much paler in colour than those of South America, but do not compare with them in consistence. Most of the Australasian tallows are of very uniform quality and much in demand.
Great Britain produces large quantities of tallow which comes into the market as town and country tallow, or home melt. Owing to the increasing demand for edible fat, much of the rough fat is carefully selected, rendered separately, and the product sold for margarine-making.
Consequently the melted tallow for soap-making is of secondary importance to the tallow melter.
The following are typical samples of tallow:--
_______________________________________________________________________ | | | | | | | | Acidity | | | | Saponification | (as Oleic | Titre, | | | Equivalent. | Acid) | °C. | | | | Per Cent. | | |_________________________________|________________|___________|________| | | | | | | Australian mutton | 285 | 0.85 | 45 | | Australian mutton | 284.4 | 0.48 | 48.3 | | Australian beef | 284.2 | 1.68 | 43.9 | | Australian beef | 283.6 | 0.85 | 42.6 | | Australian mixed | 285.1 | 3.52 | 44 | | Australian mixed | 284.6 | 1.89 | 43.5 | | South American mutton | 284.5 | 1.11 | 47 | | South American mutton | 285 | 0.90 | 47.4 | | South American beef | 284.7 | 0.81 | 45 | | South American beef | 284 | 0.94 | 44 | | North American mutton | 284.3 | 1.32 | 44 | | North American mutton | 85 | 2.18 | 43.2 | | North American beef, fine | 284.5 | 1.97 | 41.5 | | North American beef, good | 283.8 | 4.30 | 42 | | North American ordinary | 285.2 | 5.07 | 41.75 | | North American prime city | 286 | 1.01 | 41.2 | | Selected English mutton | 283.9 | 1.45 | 47 | | Selected English beef | 284.2 | 2.40 | 44 | | Home-rendered or country tallow | 284.6 | 5.1 | 43 | | Town tallow | 285.3 | 7.4 | 42.5 | |_________________________________|________________|___________|________|
Tallow should absorb from 39 to 44 per cent. iodine.
Lard.--Lard is largely imported into this country from the United States of America. The following is a typical sample of American hog's fat offered for soap-making:--
________________________________________________________ | | | | | | Saponification | Acidity | Titre, | Refractive | | Equivalent. | (as Oleic Acid) | °C. | Index | | | Per Cent. | | at 60° C. | |________________|_________________|________|____________| | | | | | | 286 | 0.5 | 37.5 | 1.4542 | |________________|_________________|________|____________|
Lard should absorb 59 to 63 per cent. iodine.
Cocoa-nut Oil.--The best known qualities are Cochin and Ceylon oils, which are prepared in Cochin (Malabar) or the Philippine Islands and Ceylon respectively.
The dried kernels of the cocoa-nut are exported to various ports in Europe, and the oil obtained comes on the market as Continental Coprah Oil, with the prefix of the particular country or port where it has been crushed, e.g., Belgian, French and Marseilles Coprah Oil. Coprah is also imported into England, and the oil expressed from it is termed English Pressed Coprah.
The following are typical examples from bulk:--
_________________________________________________________________________ | | | | | | | | Saponification | Acidity | Titre, | Refractive | | | Equivalent. | (as Oleic Acid) | °C. | Index | | | | Per Cent. | | at 25° C. | |________________|________________|_________________|________|____________| | | | | | | | Cochin oil | 215.5 | 1.5 | 23.5 | 1.4540 | | Cochin oil | 214.3 | 2.6 | 22.1 | 1.4541 | | Ceylon oil | 214.6 | 5.47 | 23 | 1.4535 | | Ceylon oil | 216 | 3.95 | 22.75 | 1.4535 | | Belgian coprah | 214.2 | 1.65 | 23 | 1.4541 | | Belgian coprah | 215 | 2.60 | 22.1 | 1.4540 | | French coprah | 214.2 | 6.55 | 23 | 1.4535 | | French coprah | 214.8 | 7.42 | 22 | 1.4540 | | Pressed coprah | 215.8 | 7.45 | 22.2 | 1.4542 | | Pressed coprah | 216 | 9.41 | 22 | 1.4555 | |________________|________________|_________________|________|____________|
Cocoa-nut oil should absorb 8.9 to 9.3 per cent. iodine.
Palm-nut Oil.--The kernels of the palm-tree fruit are exported from the west coast of Africa to Europe, and this oil obtained from them.
Typical samples of English and Hamburg oils tested:--
_________________________________________________________ | | | | | | Saponification | Acidity | Titre, | Refractive | | Equivalent. | (as Oleic Acid) | °C. | Index | | | Per Cent. | | at 25° C. | |________________|_________________|________|____________| | | | | | | 225 | 4.4 | 24 | 1.4553 | | 227 | 7.7 | 23.8 | 1.4553 | |________________|_________________|________|____________|
Palm-nut oil should absorb 10 to 13 per cent. iodine.
Olive Oil.--The olive is extensively grown in Southern Europe and in portions of Asia and Africa bordering the Mediterranean Sea. The fruit of this tree yields the oil.
The free fatty acid content of olive oil varies very considerably. Very fine oils contain less than 1 per cent. acidity; commercial oils may be graded according to their free acidity, e.g., under 5 per cent., under 10 per cent., etc., and it entirely depends upon the desired price of the resultant soap as to what grade would be used. The following is a typical sample for use in the production of high-class toilet soap:--
_________________________________________________________ | | | | | | Saponification | Acidity | Titre, | Refractive | | Equivalent. | (as Oleic Acid) | °C. | Index | | | Per Cent. | | at 15° C. | |________________|_________________|________|____________| | | | | | | 288 | 1.8 | 21 | 1.4704 | |________________|_________________|________|____________|
Olive oil should absorb 80 to 83 per cent. iodine.
Olive-kernel oil, more correctly termed Sulphur olive oil.
The amount of free fatty acids is always high and ranges from 40-70 per cent., and, of course, its glycerol content is proportionately variable.
The free acidity increases very rapidly, and is, doubtless, due to the decomposition of the neutral oil by the action of hydrolytic ferment.
A representative sample of a parcel tested:--
_______________________________________________ | | | | | Saponification | Acidity | Refractive | | Equivalent. | (as Oleic Acid) | Index | | | Per Cent. | at 20° C. | |________________|_________________|____________| | | | | | 298 | 40.96 | 1.4666 | |________________|_________________|____________|
Palm oil is produced from the fruit of palm trees, which abound along the west coast of Africa. Lagos is the best quality, whilst Camaroons, Bonny, Old Calabar and New Calabar oils are in good request for bleaching purposes.
Analysis of typical samples of crude palm oil has given:--
_________________________________________________________ | | | | | | Saponification | Acidity | Titre, | Water and | | Equivalent. | (as Oleic Acid) | °C. | Impurities, | | | Per Cent. | | Per Cent. | |________________|_________________|________|_____________| | | | | | | 278 | 10.7 | 45 | 1.6 | | 280 | 31.2 | 44.5 | 2.8 | |________________|_________________|________|_____________|
Palm oil should absorb 51 to 56 per cent. iodine.
In the lower qualities we have examples of the result of hydrolytic decomposition by enzymes, the free acidity often amounting to 70 per cent.
Cotton-seed Oil.--This oil is expressed from the seeds separated from the "wool" of the various kinds of cotton tree largely cultivated in America and Egypt.
In its crude state cotton-seed oil is a dark fluid containing mucilaginous and colouring matter, and is not applicable for soap-making. The following figures are representative of well-refined cotton-seed oils:--
_________________________________________________________________________ | | | | | | | Specific | Saponification | Acidity | Titre, | Refractive | | Gravity | Equivalent. | (as Oleic Acid) | °C. | Index | | at 15° C. | | Per Cent. | | at 20° C. | |___________|________________|_________________|________|____________| | | | | | | | 0.9229 | 290 | 0.24 | 33.6 | 1.4721 | | 0.924 | 299 | 0.39 | 35 | 1.4719 | |___________|________________|_________________|________|____________|
Cotton-seed oil should absorb 104 to 110 per cent. iodine.
Cotton-seed Stearine.--The product obtained by pressing the deposit which separates on chilling refined cotton-seed oil.
A typical sample tested:--
___________________________________________ | | | | | Saponification | Acidity | Titre, | | Equivalent. | (as Oleic Acid) | °C. | | | Per Cent. | | |________________|_________________|________| | | | | | 285.1 | 0.05 | 38 | |________________|_________________|________|
Arachis Oil.--The earth-nut or ground-nut, from which arachis oil is obtained, is extensively cultivated in North America, India and Western Africa. Large quantities are exported to Marseilles where the oil is expressed. Arachis oil enters largely into the composition of Marseilles White Soaps.
Representative samples of commercial and refined oils tested:--
______________________________________________________________________ | | | | | | | | | Specific | Saponi- | Acidity | | Refractive | | | Gravity | fication | (as Oleic | Titre, | Index | | | at 15° C. | Equi- | Acid) | °C. | at 20° C. | | | | valent | Per Cent. | | | |____________|___________|___________|___________|________|____________| | | | | | | | | Commercial | 0.9184 | 298 | 2.6 | 28.6 | | | Refined | 0.9205 | 285 | 0.22 | 24.0 | 1.4712 | |____________|___________|___________|___________|________|____________|
Arachis oil should absorb 90 to 98 per cent. iodine.
Maize Oil.--America (U.S.) produces very large quantities of maize oil.
Typical samples of crude and refined oil gave these figures:--
______________________________________________________________________ | | | | | | | | | Specific | Saponi- | Acidity | | Refractive | | | Gravity | fication | (as Oleic | Titre, | Index | | | at 15° C. | Equi- | Acid) | °C. | at 20° C. | | | | valent | Per Cent. | | | |____________|___________|___________|___________|________|____________| | | | | | | | | Crude | 0.9246 | 294 | 1.41 | 15 | | | Refined | 0.9248 | 294.1 | 0.40 | 17.2 | 1.4766 | |____________|___________|___________|___________|________|____________|
Maize oil should absorb 120 to 128 per cent. iodine.
Sesame Oil.--Sesame oil is very largely pressed in Southern France from the seeds of the sesame plant which is cultivated in the Levant, India, Japan and Western Africa.
A fairly representative sample of French expressed oil tested:--
____________________________________________________________________ | | | | | | | Specific | Saponification | Acidity | Titre, | Refractive | | Gravity | Equivalent. | (as Oleic Acid) | °C. | Index | | at 15° C. | | Per Cent. | | at 20° C. | |___________|________________|_________________|________|____________| | | | | | | | 0.9227 | 295.2 | 1.84 | 22.8 | 1.4731 | |___________|________________|_________________|________|____________|
Sesame oil should absorb 108 to 110 per cent. iodine.
Linseed Oil.--Russia, India, and Argentine Republic are the principal countries which extensively grow the flax plant, from the seeds of which linseed oil is pressed. It is used to a limited extent in soft-soap making.
A good sample gave on analysis:--
____________________________________________________________________ | | | | | | | Specific | Saponification | Acidity | Titre, | Refractive | | Gravity | Equivalent. | (as Oleic Acid) | °C. | Index | | at 15° C. | | Per Cent. | | at 15° C. | |___________|________________|_________________|________|____________| | | | | | | | 0.935 | 292 | 1.2 | 20 | 1.4840 | |___________|________________|_________________|________|____________|
Linseed oil should absorb 170 to 180 per cent. iodine.
Hemp-seed oil is produced from the seeds of the hemp plant which grows in Russia. This oil is used in soft soap-making, more particularly on the Continent.
A typical sample gave the following figures:--
__________________________________________________ | | | | | | Specific | Saponification | Titre, | | | Gravity | Equivalent. | °C. | Iodine No. | | at 15° C. | | | | |___________|________________|________|____________| | | | | | | 0.926 | 292.6 | 15.8 | 143 | |___________|________________|________|____________|
Sunflower oil is produced largely in Russia.
A specimen tested:--
____________________________________________________________________ | | | | | | | Specific | Saponification | Acidity | Titre, | | | Gravity | Equivalent. | (as Oleic Acid) | °C. | Iodine No. | | at 15° C. | | Per Cent. | | | |___________|________________|_________________|________|____________| | | | | | | | 0.9259 | 290.7 | 0.81 | 17 | 126.2 | |___________|________________|_________________|________|____________|
Castor Oil.--The castor oil plant is really a native of India, but it is also cultivated in the United States (Illinois) and Egypt.
A typical commercial sample tested:--
________________________________________________________________________ | | | | | | | | Saponi- | Acidity | | | Optical | Refractive | | fication | (as Oleic | Titre, | Iodine No. | Rotation | Index | | Equi- | Acid) | °C. | | [alpha]_{D} | at 25° C. | | valent | Per Cent. | | | | | |___________|___________|________|____________|_____________|____________| | | | | | | | | 310 | 1.5 | 2.8 | 84.1 | + 4° 50' | 1.4787 | |___________|___________|________|____________|_____________|____________|
Fish and Marine Animal Oils.--Various oils of this class have, until recently, entered largely into the composition of soft soaps, but a demand has now arisen for soft soaps made from vegetable oils.
We quote a few typical analyses of these oils:--
_________________________________________________________________________ | | | | | | | | | Specific | Saponi- | Acidity | | Unsaponi- | | | Gravity | fication | (as Oleic | Titre, | fiable | | | at 15°C. | Equi- | Acid) | °C. | Matter | | | | valent | Per Cent. | | Per Cent. | |__________________|__________|__________|___________|________|___________| | | | | | | | | Pale seal oil | 0.9252 | 289 | 0.947 | 15.5 | 0.8 | | Straw seal oil | 0.9231 | 288 | 4.77 | 15.8 | 1.2 | | Brown seal oil | 0.9253 | 291 | 16.38 | 16.2 | 1.9 | | Whale oil | 0.9163 | 297 | 1.49 | 16.1 | 1.8 | | Dark whale oil | 0.9284 | 303 | 12.60 | 21.8 | 2.4 | | Japan fish oil | 0.9336 | 296 | 4.79 | 26 | 0.67 | | Japan fish oil | 0.9325 | 302 | 10.43 | 28 | 1.55 | | Brown cod oil | 0.9260 | 313 | 14.91 | 21.8 | 1.9 | | Pure herring oil | 0.9353 | 288 | 11.39 | 21.6 | 1.5 | | Kipper oil | 0.9271 | 297 | 5.14 | 22.7 | 3.25 | |__________________|__________|__________|___________|________|___________|
Waste Fats.--Under this classification may be included marrow fat, skin greases, bone fats, animal grease, melted stuff from hotel and restaurant refuse, and similar fatty products. The following is a fair typical selection:--
_______________________________________________________________ | | | | | | | Saponification | Acidity | Titre, | | | Equivalent. | (as Oleic Acid) | °C. | | | | Per Cent. | | |___________________|________________|_________________|________| | | | | | | Marrow fat | 283.3 | 3.6 | 38.7 | | White skin grease | 287.2 | 4.3 | 36.4 | | Pale skin grease | 286.3 | 9.87 | 35.7 | | Pale bone fat | 289.7 | 8.8 | 40.7 | | Brown bone fat | 289.1 | 11.0 | 41 | | Brown bone fat | 292 | 20.5 | 40.2 | | Animal grease | 289.4 | 38.1 | 40.4 | | Melted stuff | 286.3 | 12.8 | 37.7 | |___________________|________________|_________________|________|
The materials in the above class require to be carefully examined for the presence of unsaponifiable matter, lime salts and other impurities.
Fatty Acids.--We have already described the various methods of liberating fatty acids by hydrolysis or saponification.
Under this heading should also be included stearines produced by submitting distilled fat to hydraulic pressure, the distillates from e from unsaponifiable matter, cocoa-nut oleine, a bye-product from the manufacture of edible cocoa-nut butter and consisting largely of free acids, and palm-nut oleine obtained in a similar manner from palm-nut oil.
These are all available for soap-making.
LESS-KNOWN OILS AND FATS OF LIMITED USE.
Shea Butter.--Shea butter is extracted from the kernels of the Bassia Parkii and exported from Africa and Eastern India. This fat is somewhat tough and sticky, and the amount of unsaponifiable matter present is sometimes considerable. Samples examined by us gave the following data:--
_______________________________________________________________ | | | | | | Saponification | Acidity | Titre, | Refractive | | Equivalent. | (as Oleic Acid) | °C. | Index | | | Per Cent. | | at 60° C. | |________________|_________________|________|___________________| | | | | | | 313 | 8.2 | 53.2 | 1.4566 | | 303 | 7.33 | 53 | 1.4558 | | | | | 1.4471 (F.
Acids) | |________________|_________________|________|___________________|
Mowrah-seed Oil.--The mowrah-seed oil now offered for soap-making is derived from the seeds of Bassia longifolia and Bassia latifolia. It is largely exported from India to Belgium, France and England. The following are the results of some analyses made by us:--
_________________________________________________________ | | | | | | Saponification | Acidity | Titre, | Refractive | | Equivalent. | (as Oleic Acid) | °C. | Index | | | Per Cent. | | at 60° C. | |________________|_________________|________|____________| | | | | | | 291 | 10 | 43.4 | 1.4518 | | 291.5 | 7.1 | 42.7 | | | 291.2 | 9.9 | 43.8 | | | 292 | 11.26 | 40.5 | | |________________|_________________|________|____________|
Chinese vegetable tallow is the name given to the fat which is found coating the seeds of the "tallow tree" (Stillingia sebifera) which is indigenous to China and has been introduced to India where it flourishes. The following is a typical sample:--
_____________________________________ | | | | | Saponification | Acidity | Titre, | | Equivalent | Per Cent. | °C. | |________________|___________|________| | | | | | 280.2 | 5.24 | 52.5 | |________________|___________|________|
The seeds of the "tallow tree" yield an oil (stillingia oil) having drying properties.
Borneo Tallow.--The kernels of several species of Hopea (or Dipterocarpus), which flourish in the Malayan Archipelago, yield a fat known locally as Tangawang fat. This fat is moulded (by means of bamboo canes) into the form of rolls about 3 inches thick, and exported to Europe as Borneo Tallow.
A sample tested by one of us gave the following data:--
___________________________________________ | | | | | Saponification | Acidity | Titre, | | Equivalent. | (as Oleic Acid) | °C. | | | Per Cent. | | |________________|_________________|________| | | | | | 292 | 36 | 50.8 | |________________|_________________|________|
Kapok oil is produced from a tree which is extensively grown in the East and West Indies. The Dutch have placed it on the market and the figures given by Henriques (Chem. Zeit., 17, 1283) and Philippe (Monit. Scient., 1902, 730), although varying somewhat, show the oil to be similar to cotton-seed oil.
VARIOUS NEW FATS AND OILS SUGGESTED FOR SOAP-MAKING.
Carapa or Andiroba oil, derived from the seeds of a tree (Carapa Guianensis) grown in West Indies and tropical America, has been suggested as suitable for soap-making. Deering (Imperial Institute Journ., 1898, 313) gives the following figures:--
____________________________________________ | | | | | Saponification | Acidity | Melting Point | | Equivalent | Per Cent. | of Fatty | | | | Acids, °C. | |________________|___________|_______________| | | | | | 287 | 12 | 89 | |________________|___________|_______________|
Another observer (Rev. Chem. Ind., 13, 116) gives the setting point of the fatty acids as 56.4° C.
Candle-nut oil obtained from the seeds of a tree flourishing in India and also the South Sea Islands.
The following figures have been published:--
_____________________________________________________________________________ | | | | | | Saponi- | | | | | fication | Titre,| Iodine No. | Observers.| References. | Equiv- | | | | | alent.[1] | °C. | | | |___________|_______|____________|____________|_______________________________ | | | | | | 299-304.9 | 13 | 136.3-139.3| De Negri |Chem. Centr., 1898, p. 493. | 291 | | 163.7 | Lewkowitsch|Chem. Revue, 1901, p.
156. | 296 | 12.5 | 152.8 | Kassler |Farben-Zeitung, 1903, p. 359. |___________|_______|____________|____________|_______________________________
Curcas oil is produced in Portugal from the seeds of the "purging nut tree," which is similar to the castor oil plant, and is cultivated in Cape Verde Islands and other Portuguese Colonies.
The following data have been observed:--
______________________________________________________________________________ | | | | | | Saponi- | | | | | fication | Titre,| Iodine No. | Observers.| References. | Equiv- | | | | | alent.[2] | °C. | | | |___________|_______|____________|____________|_______________________________ | | | | | | 291.4 | 0.36 | 99.5 | Archbut |J. S. C. Ind., 1898, p. 1010. | 290.3 | 4.46 | 98.3 | Lewkowitsch|Chem. Revue, 1898, p. 211. | 283.1 | 0.68 | 107.9 | Klein |Zeits. angew.
Chem., | | | | | 1898, p. 1012. |___________|_______|____________|____________|_______________________________
The titre is quoted by Lewkowitsch as 28.6° C.
Goa butter or Kokum butter is a solid fat obtained from the seeds of Garcinia indica, which flourishes in India and the East Indies.
Crossley and Le Sueur (Journ. Soc. Chem. Industry, 1898, p. 993) during an investigation of Indian oils obtained these results:--
_________________________________________ | | | | | Saponification | Acidity | Iodine No. | | Equivalent.[3] | Per Cent. | | |________________|___________|____________| | | | | | 300 | 7.1 | 34.2 | |________________|___________|____________|
Safflower oil is extracted from the seeds of the Carthamus tinctorius, which, although indigenous to India and the East Indies, is extensively cultivated in Southern Russia (Saratowa) and German East Africa. Its use has been suggested for soft-soap making. The following figures have been published:--
____________________________________________________________________________ | | | | | | | Saponi | | | | |fication | Iodine | Observers. | References. | | Equiv- | No. | | | |alent.[4]| | | |_________|_________|________|_____________|_________________________________ | | | | | | Average | 295.5 | 141.29 | Crossley and| J. S. C. Ind., 1898, p. 992; | of | | | Le Sueur | J. S. C. Ind., 1900, p. 104. | Twelve | 287.1 | 141.6 | Shukoff |Chem. Revue, 1901, p.
250. | Samples | 289.2 | 130 | Tylaikow |Chem. Revue, 1902, p. 106. | | 293.7 | 142.2 | Fendler |Chem. Zeitung, 1904, p. 867. |_________|_________|________|_____________|_________________________________
Maripa fat is obtained from the kernels of a palm tree flourishing in the West Indies, but, doubtless, the commercial fat is obtained from other trees of the same family. It resembles cocoa-nut oil and gives the following figures:--
___________________________________________________________________________ | | | | | | Saponi- | | Melting | | | fication | | Point | | | Equiv- | Iodine | of Fatty | | | alent.[5]| No. | Acids, °C.| Observer. | Reference. |__________|________|___________|___________|_______________________________ | | | | | | 217 | 9.49 | 25 | Bassière |J. S. C. Ind., 1903, p. 1137. |__________|________|___________|___________|_______________________________
Niam fat, obtained from the seeds of Lophira alata, which are found extensively in the Soudan. The fat, as prepared by natives, has been examined by Lewkowitsch, and more recently Edie has published the results of an analysis. The figures are as follows:--
__________________________________________________________________________ | | | | | | Saponi- | | | | | fication | Titre,| Iodine | Observers.| References. | Equiv- | | No. | | | alent.[6] | °C. | | | |___________|_______|________|____________|_______________________________ | | | | | | 295.1 | 78.12 | 42.5 | Lewkowitsch|J. S. C. Ind., 1907, p. 1266. | 287.7 | 75.3 | | Edïe. |Quart. J. Inst.
Comm. | | | | | Research in Tropics. |___________|_______|________|____________|_______________________________
Cohune-nut oil is produced from the nuts of the cohune palm, which flourishes in British Honduras. This oil closely resembles cocoa-nut and palm-nut oils and is stated to saponify readily and yield a soap free from odour. The following figures, obtained in the Laboratory of the Imperial Institute, are recorded in the official Bulletin, 1903, p. 25:--
________________________________________________ | | | | | Saponification | Iodine No. | Melting Point of | | Equivalent. | | Fatty Acids, °C. | |________________|____________|__________________| | | | | | 253.9-255.3 | 12.9-13.6 | 27-30 | |________________|____________|__________________|
Mafoureira or Mafura tallow from the nuts of the mafoureira tree, which grows wild in Portuguese East Africa. The following figures are published:--
______________________________________________________________________________ | | | | | Saponi- | | | | fication | | Iodine | References. | Equi- | | No. | | valent. | | | |_____________|________________|___________|___________________________________ | | Titre, °C. | | | 253.8 | 44-48 | 46.14 | De Negri and Fabris, Annal. del | | | | Lab.
Chim. Delle Gabelle, | | | | 1891-2, p. 271. | | Acidity | | | | (as Oleic Acid)| | | | Per Cent. | | Bulletin Imp. Inst., | 232.8-233.7 | 21.26 | 47.8-55.8 | 1903, p. 27. |_____________|________________|___________|___________________________________
Pongam oil, obtained from the beans of the pongam tree, which flourishes in East India, has been suggested as available for the soap industry, but the unsaponifiable matter present would militate against its use. Lewkowitsch (Analyst, 1903, pp. 342-44) quotes these results:--
_____________________________________________________________________ | | | | | | | | Saponi- | | | | | | fication | Iodine | Acidity, | Unsaponifiable, | | | Equi- | No. | Per Cent. | Per Cent. | | | valent.[7] | | | | |_________________|____________|________|___________|_________________| | | | | | | | Oil extracted | 315 | 94 | 3.05 | 9.22 | | in laboratory | | | | | | Indian specimen | 306 | 89.4 | 0.5 | 6.96 | |_________________|____________|________|___________|_________________|
Margosa oil is obtained from the seeds of Melia azedarach, a tree which is found in most parts of India and Burma.
Lewkowitsch (Analyst, 1903, pp. 342-344) gives these figures:--
__________________________________ | | | | | Saponification | Iodine | Titre, | | Equivalent.[8] | No. | °C. | |________________|________|________| | | | | | 284.9 | 69.6 | 42 | |________________|________|________|
Dika fat or Wild Mango oil is obtained from the seed kernels of various kinds of Irvingia by boiling with water. Lemarié (Bulletin Imp. Inst., 1903, p. 206) states that this fat is used in the place of cocoa-nut oil in the manufacture of soap. Lewkowitsch (Analyst, 1905, p. 395) examined a large sample of dika fat obtained from seeds of Irvingia bateri (South Nigeria) and gives the following data:--
____________________________________________________ | | | | | | Saponification | Iodine | Titre, | Unsaponifiable, | | Equivalent.[9] | No. | °C. | Per Cent. | |________________|________|________|_________________| | | | | | | 229.4 | 5.2 | 34.8 | 0.73 | |________________|________|________|_________________|
Baobab-seed Oil.--Balland (Journ. Pharm. Chem., 1904, p. 529, abstracted in Journ. Soc. Chem. Ind., 1905, p. 34) states that the natives of Madagascar extract, by means of boiling water, from the seeds of the baobab tree, a whitish solid oil, free from rancidity, and possessed of an odour similar to Tunisian olive oil. He suggests that it may, with advantage, replace cocoa-nut oil in soap manufacture.
Persimmon-seed Oil.--Lane (J. S. C. Ind., 1905, p. 390) gives constants for this oil which he describes as semi-drying, of brownish yellow colour, and having taste and odour like pea-nut (arachis) oil.
The following are taken from Lane's figures:--
___________________________________ | | | | | Saponification | Iodine | Titre, | | Equivalent.[10] | No. | °C. | |_________________|________|________| | | | | | 298.4 | 115.6 | 20.2 | |_________________|________|________|
Wheat oil, extracted from the wheat germ by means of solvents, has been suggested as applicable for soap-making (H. Snyder, abstr. J. S.
C. Ind., 1905, p. 1074). The following figures have been published:--
_______________________________________________________________________________ | | | | | | | Saponi- | | | | | | fication | Acidity,| Iodine | Titre, | Observers. | References. | Equiv- | Per | No. | | | | alent.[11]| Cent. | | °C. | | |___________|_________|________|________|_____________|________________________ | | | | | | | 306 | 5.65 | 115.17 | 29.7 | De Negri. | Chem.
Zeit., 1898 | | | | | | (abstr. J. S. C. I., | | | | | | 1898, p. 1155). | 297 | 20 | 115.64 | | Frankforter | J. Amer. C. Soc., | | | | | & Harding | 1899, 758-769 (abstr. | | | | | | in J. S. C. I., | | | | | | 1899, p. 1030). |___________|_________|________|________|_____________|________________________
Tangkallah fat, from the seeds of a tree growing in Java and the neighbouring islands, is suitable for soap-making. Schroeder (Arch.
Pharm., 1905, 635-640, abstracted in J. S. C. Ind., 1906, p. 128) gives these values:--
_______________________________________________________ | | | | | | Saponification | Acidity, | Iodine | Unsaponifiable, | | Equivalent.[12]| Per Cent. | No. | Per Cent. | |________________|___________|________|_________________| | | | | | | 209 | 1.67 | 2.28 | 1.44 | |________________|___________|________|_________________|
It is a hard fat, nearly white, possessing neither taste nor characteristic odour and solidifying at about 27° C.
Oil of Inoy-kernel.--(Bulletin Imp. Inst., 1906, p. 201). The seeds of Poga oleosa from West Africa yield on extraction an oil which gives the figures quoted below, and is suggested as a soap-maker's material:--
__________________________________ | | | | | Saponification | Iodine | Titre, | | Equivalent. | No. | °C. | |________________|________|________| | | | | | 304 | 89.75 | 22 | |________________|________|________|
ROSIN.
Rosin is the residuum remaining after distillation of spirits of turpentine from the crude oleo-resin exuded by several species of the pine, which abound in America, particularly in North Carolina, and also flourish in France and Spain. The gigantic forests of the United States consist principally of the long-leaved pine, Pinus palustris (Australis), whilst the French and Spanish oleo-resin is chiefly obtained from Pinus pinaster, which is largely cultivated.
Rosin is a brittle, tasteless, transparent substance having a smooth shining fracture and melting at about 135° C. (275° F.). The American variety possesses a characteristic aromatic odour, which is lacking in those from France and Spain. It is graded by samples taken out of the top of every barrel, and cut into 7/8 of an inch cubes, which must be uniform in size--the shade of colour of the cube determines its grade and value.
The grades are as follows:--
W. W. (Water white.)
W. G. (Window glass.)
N. (Extra pale.)
M. (Pale.)
K. (Low pale.)
I. (Good No. 1.)
H. (No. 1.)
G. (Low No. 1.)
F. (Good No. 2.)
E. (No. 2.)
D. (Good strain.)
C. (Strain.)
B. (Common strain.)
A. (Common.)
Unsaponifiable matter is present in rosin in varying amounts.
Below are a few typical figures taken from a large number of collated determinations:--
________________________________________________________________ | | | | | | | | Saponification | Total | Free | Iodine | | | Equivalent. | Acid No. | Acid No. | No. | |________________|________________|__________|__________|________| | | | | | | | American W.
W. | 330.5 | 169.7 | 119.1 | 126.9 | | American N. | 312.3 | 179.6 | 161.4 | 137.8 | | French | 320.5 | 175 | 168 | 120.7 | | Spanish | 313.4 | 179 | 160 | 129.8 | |________________|________________|__________|__________|________|
ALKALI (CAUSTIC AND CARBONATED).
The manufacture of alkali was at one time carried on in conjunction with soap-making, but of late years it has become more general for the soap manufacturer to buy his caustic soda or carbonated alkali from the alkali-maker.
Although there are some alkali-makers who invoice caustic soda and soda ash in terms of actual percentage of sodium oxide (Na_{2}O), it is the trade custom to buy and sell on what is known as the English degree, which is about 1 per cent. higher than this.
The English degree is a survival of the time when the atomic weight of sodium was believed to be twenty-four instead of twenty-three, and, since the error on 76 per cent. Na_{2}O due to this amounts to about 1 per cent., may be obtained by adding this figure to the sodium oxide really present.
Caustic soda (sodium hydrate) comes into commerce in a liquid form as 90° Tw. (and even as high as 106° Tw.), and other degrees of dilution, and also in a solid form in various grades as 60°, 70°, 76-77°, 77-78°.
These degrees represent the percentage of sodium oxide (Na_{2}O) present plus the 1 per cent. The highest grade, containing as it does more available caustic soda and less impurities, is much more advantageous in use.
Carbonate of soda or soda ash, 58°, also termed "light ash," and "refined alkali". This is a commercially pure sodium carbonate containing about 0.5 per cent. salt (NaCl). The 58° represents the English degrees and corresponds to 99 per cent. sodium carbonate (Na_{2}CO_{3}).
Soda ash, 48°, sometimes called "caustic soda ash," often contains besides carbonate of soda, 4 per cent. caustic soda (sodium hydrate), and 10 per cent. salt (sodium chloride), together with water and impurities.
The 48 degrees refers to the amount of alkali present in terms of sodium oxide (Na_{2}O), but expressed as English degrees.
Caustic potash (potassium hydrate) is offered as a liquid of 50-52° B. (98-103° Tw.) strength, and also in solid form as 75-80° and 88-92°. The degrees in the latter case refer to the percentage of potassium hydrate (KHO) actually present.
Carbonate of Potash.--The standard for refined carbonate of potash is 90-92 per cent. of actual potassium carbonate (K_{2}CO_{3}) present, although it can be obtained testing 95-98 per cent.
OTHER MATERIALS.
Water.--Water intended for use in soap-making should be as soft as possible. If the water supply is hard, it should be treated chemically; the softening agents may be lime and soda ash together, soda ash alone, or caustic soda. There are many excellent plants in vogue for water softening, which are based on similar principles and merely vary in mechanical arrangement. The advantages accruing from the softening of hard water intended for steam-raising are sufficiently established and need not be detailed here.
Salt (sodium chloride or common salt, NaCl) is a very important material to the soap-maker, and is obtainable in a very pure state.
Brine, or a saturated solution of salt, is very convenient in soap-making, and, if the salt used is pure, will contain 26.4 per cent. sodium chloride and have a density of 41.6° Tw. (24.8° B.).
The presence of sulphates alters the density, and of course the sodium chloride content.
Salt produced during the recovery of glycerine from the spent lyes often contains sulphates, and the density of the brine made from this salt ranges higher than 42° Tw. (25° B.).
Soapstock.--This substance is largely imported from America, where it is produced from the dark-coloured residue, termed mucilage, obtained from the refining of crude cotton-seed oil. Mucilage consists of cotton-seed oil soap, together with the colouring and resinous principles separated during the treatment of the crude oil. The colouring matter is removed by boiling the mucilage with water and graining well with salt; this treatment is repeated several times until the product is free from excess of colour, when it is converted into soap and a nigre settled out from it.
Soapstock is sold on a fatty acid basis; the colour is variable.
FOOTNOTES:
[1] Calculated by us from saponification value.
[2] Calculated by us from saponification value.
[3] Calculated by us from saponification value.
[4] Calculated by us from saponification value.
[5] Calculated by us from saponification value.
[6] Calculated by us from saponification value.
[7] Calculated by us from saponification value.
[8] Calculated by us from saponification value.
[9] Calculated by us from saponification value.
[10] Calculated by us from saponification value.
[11] Calculated by us from saponification value.
[12] Calculated by us from saponification value.
CHAPTER IV.
BLEACHING AND TREATMENT OF RAW MATERIALS INTENDED FOR SOAP-MAKING.
Palm Oil--Cotton-seed Oil--Cotton-seed "Foots"--Vegetable
Oils--Animal Fats--Bone Fat--Rosin.
Having described the most important and interesting oils and fats used or suggested for use in the manufacture of soap, let us now consider briefly the methods of bleaching and treating the raw materials, prior to their transference to the soap-pan.
Crude Palm Oil.--Of the various methods suggested for bleaching palm oil, the bichromate process originated by Watts is undoubtedly the best.
The reaction may be expressed by the following equation, though in practice it is necessary to use twice the amount of acid required by theory:--
K_{2}Cr_{2}O_{7} + 14HCl = 2KCl + Cr_{2}Cl_{6} + 7H_{2}O + 6Cl.
6Cl + 3H_{2}O = 6HCl + 3O.
The palm oil, freed from solid impurities by melting and subsidence, is placed in the bleaching tank, and washed with water containing a little hydrochloric acid. Having allowed it to rest, and drawn off the liquor and sediment (chiefly sand), the palm oil is ready for treatment with the bleaching reagent, which consists of potassium bichromate and commercial muriatic acid. For every ton of oil, 22 to 28 lb. potassium bichromate and 45 to 60 lb. acid will be found sufficient to produce a good bleached oil.
The best procedure is to act upon the colouring matter of the oil three successive times, using in the first two treatments one-third of the average of the figures just given, and in the final treatment an appropriate quantity which can be easily gauged by the appearance of a cooled sample of the oil.
The potassium bichromate is dissolved in hot water and added to the crude palm oil, previously heated to 125° F. (52° C.), the requisite amount of muriatic acid being then run in and the whole well agitated by means of air. The bright red colour of the oil gradually changes to dark brown, and soon becomes green. The action having proceeded for a few minutes, agitation is stopped, and, after allowing to settle, the green liquor is withdrawn.
When sufficiently bleached the oil is finally washed (without further heating) with hot water (which may contain salt), to remove the last traces of chrome liquor.
If the above operation is carried out carefully, the colouring matter will be completely oxidised.
It is important, however, that the temperature should not be allowed to rise above 130° F. (54° C.) during the bleaching of palm oil, otherwise the resultant oil on saponification is apt to yield a soap of a "foxy" colour. The bleached oil retains the characteristic violet odour of the original oil.
It has been suggested to use dilute sulphuric acid, or a mixture of this and common salt, in the place of muriatic acid in the above process.
Crude Cotton-seed Oil.--The deep colouring matter of crude cotton-seed oil, together with the mucilaginous and resinous principles, are removed by refining with caustic soda lye.
The chief aim of the refiner is to remove these impurities without saponifying any of the neutral oil. The percentage of free fatty acids in the oil will determine the quantity of caustic lye required, which must only be sufficient to remove this acidity.
Having determined the amount of free acidity, the quantity of caustic soda lye necessary to neutralise it is diluted with water to 12° or 15° Tw. (8° or 10° B.), and the refining process carried out in three stages. The oil is placed in a suitable tank and heated by means of a closed steam coil to 100° F. (38° C.), a third of the necessary weak caustic soda lye added in a fine stream or by means of a sprinkler, and the whole well agitated with a mechanical agitator or by blowing a current of air through a pipe laid on the bottom of the tank.
Prolonged agitation with air has a tendency to oxidise the oil, which increases its specific gravity and refractive index, and will be found in the soap-pan to produce a reddish soap. As the treatment proceeds, the temperature may be carefully raised, by means of the steam coil, to 120° F. (49° C.).
The first treatment having proceeded fifteen minutes, the contents of the tank are allowed to rest; the settling should be prolonged as much as possible, say overnight, to allow the impurities to precipitate well, and carry down the least amount of entangled oil. Having withdrawn these coloured "foots," the second portion of the weak caustic soda solution is agitated with the partially refined oil, and, when the latter is sufficiently treated, it is allowed to rest and the settled coloured liquor drawn off as before. The oil is now ready for the final treatment, which is performed in the same manner as the two previous ones. On settling, a clear yellow oil separates.
If desired, the oil may be brightened and filtered, after refining to produce a marketable article, but if it is being refined for own use in the soap-house, this may be omitted.
The residue or "foots" produced during the refining of crude cotton-seed oil, known in the trade as "mucilage," may be converted into "soapstock" as mentioned in the preceding chapter, or decomposed by a mineral acid and made into "black grease" ready for distillation by superheated steam.
Vegetable Oils.--The other vegetable oils come to the soap-maker's hand in a refined condition; occasionally, however, it is desirable to remove a portion of the free fatty acids, which treatment also causes the colouring matter to be preciptated. This is effected by bringing the oil and a weak solution of caustic lye into intimate contact. Cocoa-nut oil is often treated in this manner. Sometimes it is only necessary to well agitate the oil with 1-1/2 per cent. of its weight of a 12° Tw. (8° B.) solution of caustic soda and allow to settle. The foots are utilised in the soap-pan.
Animal Fats.--Tallows are often greatly improved by the above alkaline treatment at 165° F. (73° C.). It is one of the best methods and possesses advantages over acid processes--the caustic soda removes the free acid and bodies of aldehyde nature, which are most probably the result of oxidation or polymerisation, whereas the neutral fat is not attacked, and further, the alkaline foots can be used in the production of soap.
Bone fat often contains calcium (lime) salts, which are very objectionable substances in a soap-pan. These impurities must be removed by a treatment with hydrochloric or sulphuric acid. The former acid is preferable, as the lime salt formed is readily soluble and easily removed. The fat is agitated with a weak solution of acid in a lead-lined tank by blowing in steam, and when the treatment is complete and the waste liquor withdrawn, the last traces of acid are well washed out of the liquid fat with hot water.
Rosin.--Several methods have been suggested for bleaching rosin; in some instances the constitution of the rosin is altered, and in others the cost is too great or the process impracticable.
The aim of these processes must necessarily be the elimination of the colouring matter without altering the original properties of the substance. This is best carried out by converting the rosin into a resinate of soda by boiling it with a solution of either caustic soda or carbonated alkali. The process is commenced by heating 37 cwt. of 17° Tw. (11° B.) caustic soda lye, and adding 20 cwt. of rosin, broken into pieces, and continuing the boiling until all the resinate is homogeneous, when an addition of 1-1/2 cwt. of salt is made and the boiling prolonged a little.
On resting, the coloured liquor rises to the surface of the resinate, and may be siphoned off (or pumped away through a skimmer pipe) and the resinate further washed with water containing a little salt.
The treatment with carbonated alkali is performed in a similar manner. A solution, consisting of 2-3/4 cwt. of soda ash (58°), in about four times its weight of water, is heated and 20 cwt. of rosin, broken into small pieces, added. The whole is heated by means of the open steam coil, and care must be taken to avoid boiling over. Owing to the liberation of CO_{2} gas, frothing takes place. A large number of patents have been granted for the preparation of resinate of soda, and many methods devised to obviate the boiling over.
Some suggest mixing the rosin and soda ash (or only a portion of the soda ash) prior to dissolving in water; others saponify in a boiler connected with a trap which returns the resinate to the pan and allows the carbonic-acid gas to escape or to be collected.
With due precaution the method can be easily worked in open vessels, and, using the above proportions, there will be sufficient uncombined rosin remaining to allow the resultant product to be pumped into the soap with which it is intended to intermix it, where it will be finally saponified thoroughly.
The salt required, which, in the example given, would be 1-1/2 cwt., may be added to the solution prior to the addition of rosin or sprinkled in towards the finish of the boiling. When the whole has been sufficiently boiled and allowed to rest, the liquor containing the colouring matter will float over the resinate, and, after removal, may be replaced by another washing.
Many other methods have been suggested for the bleaching, refining and treatment of materials intended for saponification, but the above practical processes are successfully employed.
All fats and oils after being melted by the aid of steam must be allowed to thoroughly settle, and the condensed water and impurities withdrawn through a trap arrangement for collecting the fatty matter. The molten settled fatty materials en route to the soap-pan should be passed through sieves sufficiently fine to free them from suspended matter.
CHAPTER V.
SOAP-MAKING.
Classification of Soaps--Direct Combination of Fatty Acids
with Alkali--Cold Process Soaps--Saponification under Increased
or Diminished Pressure--Soft Soap--Marine Soap--Hydrated Soaps,
Smooth and Marbled--Pasting or Saponification--Graining
Out--Boiling on Strength--Fitting--Curd Soaps--Curd
Mottled--Blue and Grey Mottled Soaps--Milling Base--Yellow
Household Soaps--Resting of Pans and Settling of
Soap--Utilisation of Nigres--Transparent Soaps--Saponifying
Mineral Oil--Electrical Production of Soap.
Soaps are generally divided into two classes and designated "hard," and "soft," the former being the soda salts, and the latter potash salts, of the fatty acids contained in the material used.
According to their methods of manufacture, soaps may, however, be more conveniently classified, thus:--
(A) Direct combination of fatty acids with alkali.
(B) Treatment of fat with definite amount of alkali and no separation of waste lye.
(C) Treatment of fat with indefinite amount of alkali and no separation of waste lye.
(D) Treatment of fat with indefinite amount of alkali and separation of waste lye.
(A) Direct Combination of Fatty Acids with Alkali.--This method consists in the complete saturation of fatty acids with alkali, and permits of the use of the deglycerised products mentioned in chapter ii., section 2, and of carbonated alkalies or caustic soda or potash.
Fatty acids are readily saponified with caustic soda or caustic potash of all strengths.
The saponification by means of carbonated alkali may be performed in an open vat containing a steam coil, or in a pan provided with a removable agitator.
It is usual to take soda ash (58°), amounting to 19 per cent. of the weight of fatty acids to be saponified, and dissolve it in water by the aid of steam until the density of the solution is 53° Tw. (30° B.); then bring to the boil, and, whilst boiling, add the molten fatty acids slowly, but not continuously.
Combination takes place immediately with evolution of carbonic acid gas, which causes the contents of the vat or pan to swell, and frequently to boil over. The use of the agitator, or the cessation of the flow of fatty acids, will sometimes tend to prevent the boiling over. It is imperative that the steam should not be checked but boiling continued as vigorously as possible until all the alkali has been absorbed and the gas driven off.
The use of air to replace steam in expelling the carbonic acid gas has been patented (Fr. Pat. 333,974, 1903).
A better method of procedure, however, is to commence with a solution of 64° Tw. (35° B.) density, made from half the requisite soda ash (9-1/2 per cent.), and when this amount of alkali has all been taken up by the fatty acids (which have been added gradually and with continuous boiling), the remaining quantity of soda ash is added in a dry state, being sprinkled over each further addition of fatty acid.
This allows the process to be more easily controlled and boiling over is avoided.
It is essential that the boiling by steam should be well maintained throughout the process until all carbonic acid gas has been thoroughly expelled; when that point is reached, the steam may be lessened and the contents of the vat or pan gently boiled "on strength" with a little caustic lye until it ceases to absorb caustic alkali, the soap being finished in the manner described under (D).
It is extremely difficult to prevent discoloration of fatty acids, hence the products of saponification in this way do not compare favourably in appearance with those produced from the original neutral oil or fat.
(B) Treatment of Fat with Definite Amount of Alkali and no Separation of Waste Lye.--Cold-process soap is a type of this class, and its method of production is based upon the characteristic property which the glycerides of the lower fatty acids (members of the cocoa-nut-oil class) possess of readily combining with a strong caustic soda solution at a low temperature, and evolving sufficient heat to complete the saponification.
Sometimes tallow, lard, cotton-seed oil, palm oil and even castor oil are used in admixture with cocoa-nut oil. The process for such soap is the same as when cocoa-nut oil is employed alone, with the slight alteration in temperature necessary to render the fats liquid, and the amount of caustic lye required will be less. Soaps made of these blends closely resemble, in appearance, milled toilet soaps. In such mixtures the glycerides of the lower fatty acids commence the saponification, and by means of the heat generated induce the other materials, which alone would saponify with difficulty or only with the application of heat, to follow suit.
It is necessary to use high grade materials; the oils and fats should be free from excess of acidity, to which many of the defects of cold-process soaps may be traced. Owing to the rapidity with which free acidity is neutralised by caustic soda, granules of soap are formed, which in the presence of strong caustic lye are "grained out" and difficult to remove without increasing the heat; the soap will thus tend to become thick and gritty and sometimes discoloured.
The caustic lye should be made from the purest caustic soda, containing as little carbonate as possible; the water used for dissolving or diluting the caustic soda should be soft (i.e., free from calcium and magnesium salts), and all the materials carefully freed from particles of dirt and fibre by straining.
The temperature, which, of course, must vary with the season, should be as low as is consistent with fluidity, and for cocoa-nut oil alone may be 75° F. (24° C.), but in mixtures containing tallow 100° to 120° F. (38° to 49° C.).
The process is generally carried out as follows:--
The fluid cocoa-nut oil is stirred in a suitable vessel with half its weight of 71.4° Tw. (38° B.) caustic soda lye at the same temperature, and, when thoroughly mixed, the pan is covered and allowed to rest. It is imperative that the oils and fats and caustic lye should be intimately incorporated or emulsified. The agitating may be done mechanically, there being several machines specially constructed for the purpose. In one of the latest designs the caustic lye is delivered through a pipe which rotates with the stirring gear, and the whole is driven by means of a motor.
The agitation being complete, chemical action takes place with the generation of heat, and finally results in the saponification of the fats.
At first the contents of the pan are thin, but in a few hours they become a solid mass. As the process advances the edges of the soap become more transparent, and when the transparency has extended to the whole mass, the soap is ready, after perfuming, to be framed and crutched.
The admixture of a little caustic potash with the caustic soda greatly improves the appearance of the resultant product, which is smoother and milder.
The glycerine liberated during the saponification is retained in the soap.
Although it is possible, with care, to produce neutral soaps of good appearance and firm touch by this method, cold-process soaps are very liable to contain both free alkali and unsaponified fat, and have now fallen considerably into disrepute.
Saponification under Increased or Diminished Pressure.--Soaps made by boiling fats and oils, under pressure and in vacuo, with the exact quantity of caustic soda necessary for complete combination, belong also to this class. Amongst the many attempts which have at various times been made to shorten the process of soap-making may be mentioned Haywood's Patent No. 759, 1901, and Jourdan's French Patent No. 339,154, 1903.
In the former, saponification is carried out in a steam-jacketed vacuum chamber provided with an elaborate arrangement of stirrers; in the other process fat is allowed to fall in a thin stream into the amount of lye required for saponification, previously placed in the saponification vessel, which is provided with stirring gear.
When the quantities have been added, steam is admitted and saponification proceeds.
(C) Treatment of Fat with Indefinite Amount of Alkali and no Separation of Waste Lye.--Soft soap is representative of this class. The vegetable fluid oils (linseed, olive, cotton-seed, maize) are for the most part used in making this soap, though occasionally bone fats and tallow are employed. Rosin is sometimes added, the proportion ranging, according to the grade of soap required, from 5 to 15 per cent. of the fatty matter.
The Soft Soap Manufacturers' Convention of Holland stipulate that the materials used in soft-soap making must not contain more than 5 per cent. rosin; it is also interesting to note that a patent has been granted (Eng. Pat. 17,278, 1900) for the manufacture of soft soap from material containing 50 per cent. rosin.
Fish or marine animal oils--whale, seal, etc., once largely used as raw material for soft soap, have been superseded by vegetable oils.
The materials must be varied according to the season; during hot weather, more body with a less tendency to separate is given by the introduction of oils and fats richer in stearine; these materials also induce "figging".
The most important material, however, is the caustic potash lye which should average 40° Tw. (24° B.), i.e., if a weak solution is used to commence saponification, a stronger lye must be afterwards employed to avoid excess of water in the soap, and these average 40° Tw. (24° B.).
The potash lye must contain carbonates, which help to give transparency to the resultant soap. If the lye is somewhat deficient in carbonates, they may be added in the form of a solution of refined pearl ash (potassium carbonate).
Caustic soda lye is sometimes admixed, to the extent of one-fourth, with potash lye to keep the soap firmer during hot weather, but it requires great care, as a slight excess of soda gives soft soap a bad appearance and a tendency to separate.
The process is commenced by running fatty matter and weak potash lyes into the pan or copper, and boiling together, whilst the introduction of oil and potash lye is continued.
The saponification commences when an emulsion forms, and the lye is then run in more quickly to prevent the mass thickening.
Having added sufficient "strength" for complete saponification, the boiling is continued until the soap becomes clear.
The condition of the soap is judged by observing the behaviour of a small sample taken from the pan and dropped on glass or iron. If the soap is satisfactory it will set firm, have a short texture and slightly opaque edge, and be quite clear when held towards the light. If the cooled sample draws out in threads, there is an excess of water present.
If an opaque edge appears and vanishes, the soap requires more lye. If the sample is turbid and somewhat white, the soap is too alkaline and needs more oil.
The glycerine liberated during saponification is contained in the soap and no doubt plays a part in the production of transparency.
Hydrated soaps, both smooth and marbled, are included in this classification, but are soda soaps. Soap made from cocoa-nut oil and palm-kernel oil will admit of the incorporation of large quantities of a solution of either salt, carbonate of soda, or silicate of soda, without separation, and will retain its firmness. These materials are, therefore, particularly adapted for the manufacture of marine soaps, which often contain as much as 80 per cent. of water, and, being soluble in brine, are capable of use in sea-water.
For the same reason, cocoa-nut oil enters largely into the constitution of hydrated soaps, but the desired yield or grade of soap allows of a variation in the choice of materials. Whilst marine soap, for example, is usually made from cocoa-nut oil or palm-kernel oil only, a charge of 2/3 cocoa-nut oil and 1/3 tallow, or even 2/3 tallow and 1/3 cocoa-nut oil, will produce a paste which can carry the solutions of silicate, carbonate, and salt without separation, and yield a smooth, firm soap.
The fatty materials, carefully strained and freed from particles of dirt and fibre, are boiled with weak caustic soda lye until combination has taken place. Saponification being complete, the solution of salt is added, then the carbonate of soda solution, and finally the silicate of soda solution, after which the soap is boiled. When thoroughly mixed, steam is shut off, and the soap is ready for framing.
The marbled hydrated soap is made from cocoa-nut oil or a mixture of palm-kernel oil and cocoa-nut oil with the aid of caustic soda lye 32-1/2° Tw. (20° B.). As soon as saponification is complete, the brine and carbonate of soda solution are added, and the pan allowed to rest.
The soap is then carefully tasted as to its suitability for marbling by taking samples and mixing with the colouring solution (ultramarine mixed with water or silicate of soda solution). If the sample becomes blue throughout, the soap is too alkaline; if the colour is precipitated, the soap is deficient in alkali. The right point has been reached when the marbling is distributed evenly. Having thus ascertained the condition of the pan, and corrected it if necessary, the colour, mixed in water or in silicate of soda solution, is added and the soap framed.
(D) Treatment of Fat with Indefinite Amount of Alkali and Separation of Waste Lye.--This is the most general method of soap-making. The various operations are:--
(a) Pasting or saponification.
(b) Graining out or separation.
(c) Boiling on strength.
And in the case of milling soap base and household soaps,
(d) Fitting.
(a) Pasting or Saponification.--The melted fats and oils are introduced into the soap-pan and boiled by means of open steam with a caustic soda lye 14° to 23.5° Tw. (10° to 15° B.). Whether the fatty matters and alkali are run into the pan simultaneously or separately is immaterial, provided the alkali is not added in sufficient excess to retard the union.
The commencement of the saponification is denoted by the formation of an emulsion. Sometimes it is difficult to start the saponification; the presence of soap will often assist this by emulsifying the fat and thus bringing it into intimate contact with the caustic soda solution.
When the action has started, caustic soda lye of a greater density, 29° to 33° Tw. (18° to 20° B.), is frequently added, with continued boiling, in small quantities as long as it is being absorbed, which is ascertained by taking out samples from time to time and examining them.
There should be no greasiness in the sample, but when pressed between finger and thumb it must be firm and dry.
Boiling is continued until the faint caustic taste on applying the cooled sample to the tongue is permanent, when it is ready for "graining out". The pasty mass now consists of the soda salts of the fat (as imperfect soap, probably containing emulsified diglycerides and monoglycerides), together with water, in which is dissolved the glycerine formed by the union of the liberated glyceryl radicle from the fat with the hydroxyl radicle of the caustic soda, and any slight excess of caustic soda and carbonates. The object of the next operation is to separate this water (spent lye) from the soap.
(b) Graining Out or Separation.--This is brought about by the use of common salt, in a dry form or in solution as brine, or by caustic soda lye. Whilst the soap is boiling, the salt is spread uniformly over its surface, or brine 40° Tw. (24° B.) is run in, and the whole well boiled together. The soap must be thoroughly boiled after each addition of salt, and care taken that too large a quantity is not added at once.
As the soap is gradually thrown out of solution, it loses its smooth transparent appearance, and becomes opaque and granular.
When a sample, taken out on a wooden trowel, consists of distinct grains of soap and a liquid portion, which will easily separate, sufficient salt or brine has been added; the boiling is stopped and the spent lye allowed to settle out, whilst the soap remains on the surface as a more or less thick mass.
The separated spent lye consists of a solution of common salt, glycerine, and alkaline salts; the preparation of crude glycerine therefrom is considered in chapter ix.
The degree of separation of water (spent lye) depends upon the amount of precipitant used. The aim is to obtain a maximum amount of spent lye separated by the use of a minimum quantity of salt.
The amount of salt required for "graining out" varies with the raw material used. A tallow soap is the most easily grained, more salt is required for cotton-seed oil soap, whereas soaps made from cocoa-nut and palm-kernel oils require very large amounts of salt to grain out thoroughly. Owing to the solubility in weak brine of these latter soaps, it is preferable to grain them with caustic soda lye. This is effected by adding, during boiling, sufficient caustic lye (32-1/2° Tw., 20° B.) to produce the separation of the granules of soap. The whole is allowed to rest; the separated half-spent lye is withdrawn and may be used for the pasting of fresh materials.
After the removal of the settled lye, the grained mass is boiled with sufficient water to dissolve the grain and make it smooth ("close" it), and is now ready for the next operation of "boiling on strength".
(c) Boiling on Strength or Clear Boiling.--This is the most important operation and is often termed "making the soap". The object is to harden the soap and to ensure complete saponification.
Caustic soda lye (32-1/2° Tw., 20° B.) is gradually added until the soap is again opened or grained, and boiling continued by the use of the dry steam coil. As soon as the caustic soda lye is absorbed, another portion is slowly added, and this is continued until the caustic soda or "strength" remains permanent and the soapy mass, refusing to absorb more, is thrown out of solution and grained. The granular mass will boil steadily, and the boiling should be prolonged, as the last traces of neutral oil are difficult to completely saturate with alkali.
Thorough saponification takes place gradually, and the operation cannot be hurried; special care has to be bestowed upon this operation to effect the complete combination of fat and alkali.
After resting for several hours, half-spent lye settles to the bottom of the pan. In the case of yellow soaps or milling bases the settled lye is removed to a suitable receptacle and reserved for use in the saponification of other material, and the soap is then ready for the final operation of "fitting".
(d) Fitting.--If the operations just described have been properly performed, the fitting should present no difficulty. The soap is boiled with open steam, and water added until the desired degree of closing is attained. As the water is thoroughly intermixed throughout the mass the thick paste gradually becomes reduced to a smooth, thin consistence.
Samples are tested from time to time as to their behaviour in dropping off a hot trowel held sideways; the thin layer should drop off in two or three flakes and leave the surface of the trowel clean and dry. The soap is then in a condition to allow the impurities to gravitate. According to the required soap, the fit may be "coarse" ("open") when the flakes drop off the trowel readily, or "fine" ("close") when the flakes only leave the trowel with difficulty.
If the dilution with water has been allowed to proceed too far, and too fine a fit is produced, which would be denoted by the layer of soap not leaving the trowel, a little caustic lye or brine may be very carefully added and the whole well boiled until the desired condition is obtained.
A good pressure of steam is now applied to the pan, causing the contents to swell as high as possible, this greatly facilitating the settling of impurities; steam is then turned off, the pan covered, and the boil allowed to rest for several days.
The art of fitting consists in leaving the contents of the pan in such a condition that, on standing, all the impurities precipitate, and the settled soap, containing the correct amount of water, is clear and bright.
The above is a general practical outline of the ordinary soap-boiling process. It may be modified or slightly altered according to the fancy of the individual soap-maker or the particular material it is desired to use. Fats and oils not only vary in the amount of alkali they absorb during saponification, but also differ in the strength of the alkali they require. Tallow and palm oil require lye of a density of 15° to 18° Tw. (10° to 12° B.), but cocoa-nut oil alone would not saponify unless the lye was more concentrated, 33° to 42° Tw. (20° to 25° B.).
Cotton-seed oil requires weak lyes for saponification, and, being difficult to saponify alone even with prolonged boiling, is generally mixed with animal fat.
When fats are mixed together, however, their varying alkali requirements become modified, and once the saponification is begun with weak lye, other materials are induced to take up alkali of a strength with which alone they would not combine.
It is considered the best procedure to commence the pasting or saponification with weak lye.
In order to economise tank space, it is the general practice to store strong caustic lye (60° to 70° Tw., 33° to 37° B.) and to dilute it as it is being added to the soap-pan by the simultaneous addition of water.
Many manufacturers give all their soap a "brine wash" to remove the last traces of glycerine and free the soap from carbonates. This operation takes place prior to "fitting"; sufficient water is added to the boiling soap to "close" it and then brine is run in to "grain" it.
After resting, the liquor is withdrawn.
Having described the necessary operations in general, we will now consider their application to the preparation of various kinds of hard soap.
Curd Soaps.--Tallow is largely used in the manufacture of white curd soaps, but cocoa-nut oil sometimes enters into their composition.
The first three operations above described, viz., pasting, graining out, and boiling on strength, are proceeded with; the clear boiling by means of a closed steam coil is continued until the "head" is boiled out and the soap is free from froth. A sample taken and cooled should be hard. Boiling is then stopped, and, after covering, the pan is allowed to rest for eight to ten hours, when the soap is ready for filling into frames, where it is crutched until perfectly smooth.
Curd mottled is usually made from melted kitchen stuff and bone grease.
Its preparation is substantially the same as for curd soap, but the clear boiling is not carried so far. The art of curd mottled soap-making lies in the boiling. If boiled too long the mottling will not form properly, and, on the other hand, insufficient boiling will cause the soap to contain an excess of entangled lye. Having boiled it to its correct concentration the pan is allowed to rest about two hours, after which the soap is ready for framing, which should be done expeditiously and the frames covered up.
Some lye, containing the impurities from the fats used, remains in the interstices of the curd, unable to sink, and as the soap cools it is enclosed and forms the mottling. The mottling may, therefore, be considered as a crystallisation of the soap, in which the impurity forms the colour.
Blue and Grey Mottled Soaps.--These are silicated or liquored soaps in which the natural mottling, due to the impure materials used in the early days of soap-making, is imitated by artificial mottling, and are, consequently, entirely different to curd mottled soaps.
The materials employed in making mottled soap comprise bleached palm oil, tallow, bone fat, cocoa-nut oil, palm-kernel oil, cotton-seed oil, and, in some instances, rosin.
The choice of a charge will naturally depend upon the cost; the property of absorbing a large amount of liquor, which is characteristic of soaps made from cocoa-nut oil and palm-kernel oil, is taken advantage of, as are also the physical properties of the various fats and oils, with a view to the crystallisation of the resultant soap and the development of the mottle. The fat is saponified, grained and boiled on strength, as previously described. After withdrawing the half-spent lye, the soap is just closed by boiling with water, and is then ready for the silicate or other saline additions.
Soap intended to be liquored with silicate of soda should be distinctly strong in free alkali; the crystalline nature of the soap is increased thereby, and the mottled effect intensified. Some makers, however, fit the soap coarsely and allow a nigre to deposit; then, after removing the nigre, or transferring the settled soap to another copper, containing scraps of mottled soap, get the soap into a condition for mottling, and add the silicate of soda solution. To every 1 cwt. of soap, 28 lb. of silicate of soda solution, 32-1/2° Tw.
(20° B.) is added, whilst boiling; the strength of the silicate solution, however, will depend upon the proportion of cocoa-nut oil and palm-kernel oil present in the charge. Many soap-makers use 20° Tw. (13° B.) (cold) silicate solution, whilst others prefer 140° Tw. (59.5° B.), with the gradual addition of water to the soap, kept boiling, until the product is in the correct mottling condition, and others, again, use bleach liquor, soda crystals, pearl ash, and salt, together with silicate solution.
Considerable skill and experience is necessary to discern when the soap acquires the correct mottling state. It should drop off the spatula in large thick flakes, take considerable time to set, and the surface should not be glossy.
When this mottling condition has been obtained, the colouring matter, which would be ultramarine for the blue mottled and manganese dioxide for the grey mottled soap (3-4 lb. ultramarine or 1-3 lb. manganese dioxide being sufficient for 1 ton of soap), is mixed with a little water and added to the boiling soap--the boiling is continued until all is thoroughly amalgamated, and when the steam is shut off the contents of the pan are ready for cleansing.
Mottled soap is run into wooden frames, which, when full, are covered over and allowed to cool very gradually. On cooling slowly, large crystals are produced which result in a distinct bold mottle; if the cooling is too rapid, a small crystal is obtained and the mottle is not distributed, resulting in either a small mottle, or no mottle at all, and merely a general coloration. In fact, the entire art of mottling soap consists in properly balancing the saline solutions and colouring matter, so that the latter is properly distributed throughout the soap, and does not either separate in coloured masses at the bottom of the frame, or uniformly colour the whole mass.
A sample of the soap should test 45 per cent. fatty acids, and the amount of salt would range from 1/2 to 1 per cent.
Some of the English mottled soaps, especially those made from materials which give a yellow-coloured ground, are bleached by soaking in brine, or pickling in brine containing 2 per cent. of bleach liquor. The resultant soap has a white ground and is firm. The bleach liquor may be made by mixing 1 cwt. bleaching powder with 10 cwts. of soda ash solution (15° Tw., 10° B.), allowing to settle, and using the clear liquid, or by mixing 2 parts soda ash solution with 1 part of bleaching powder solution, both solutions being 30° Tw. (18.8° B.).
Milling-base.--The materials generally used are tallows and cocoa-nut oils of the finest quality. The tallow is thoroughly saponified first, and the graining is performed by the aid of caustic soda lye in preference to salt. The half-spent lyes are withdrawn, and the cocoa-nut oil added to the pan. This is saponified, and when the saponification is complete, "boiling-on-strength" is proceeded with.
Special care should be devoted to the "boiling-on-strength" operation--its value in good soap-making cannot be over-rated--and perfect saponification must be ensured. The half-spent lyes are allowed to deposit during the night, and the soap must be carefully examined next morning to ascertain if any alkali has been absorbed. If the caustic taste is permanent the strengthening operation is complete, but should any caustic have been absorbed, further addition of alkali must be made and the boiling continued. These remarks apply equally to all soaps.
The soap, when ready, is fitted.
Bleached palm oil, olive oil, castor oil and lard are also employed in the production of special milling soap bases, a palm oil soap being specially suitable for the production of a violet-scented toilet soap.
Yellow Household Soaps. (a) Bar Soaps.--These are made from tallow with an admixture of from 15-25 per cent. rosin. The best quality is known in the South and West of England as Primrose Soap, but is designated in the North of England by such names as Golden Pale, Imperial Pale, Gold Medal Pale, etc. Tallow alone produces a very hard soap of inferior lathering qualities; but rosin combines with alkali to form a soft body, which, although not a soap in the strict sense of the term, is readily soluble in water, and in admixture with the durable tallow soap renders it more soluble in water and thereby increases its lathering properties.
The rosin may be added to the soap-pan after a previous partial saponification with soda ash, and removal of colouring matter, and finally saponified with caustic soda lye, or, as is more generally adopted, as a rosin change. The pan is opened with caustic soda lye and saturation of the rosin takes place rapidly; when completely saponified it is grained with salt, and the coloured lye allowed to deposit and finally withdrawn.
The four operations already detailed apply to this soap.
Cheaper pale soaps may be made from lower grades of tallow and rosin and are generally silicated.
(b) Tablet or Washer Type.--A demand has arisen for soap of free lathering qualities, which has become very popular for general household use. This soap is usually made from a mixture of cotton-seed oil, tallow, and cocoa-nut oil, with a varying amount of rosin. The tallow yields firmness and durability whilst the other constituents all assist in the more ready production of a copious lather.
As to what amount of rosin can be used to yield a finished soap of sufficient body and satisfactory colour, this naturally depends upon the grade of raw material at the soap-makers' disposal. Those fats and oils which yield firm soaps, will, of course, allow a greater proportion of rosin to be incorporated with them than materials producing soaps of less body. Rosin imparts softness to a soap, and also colour.
This is a fitted soap and full details of manufacture have already been given.
Cheaper soaps are produced from lower grade materials hardened with alkaline solutions.
Resting of Pans and Settling of Soap.--The fitted soap is allowed to settle from four to six days. The period allowed for resting is influenced, however, not only by the size of the boil, and the season, but also by the composition of the soap, for if the base has been made from firm stock it is liable to cool quicker than a soap produced from soft-bodied materials.
On subsidence, the contents of the pan will have divided into the following:--
First. On top, a thin crust of soap, with perhaps a little light coloured fob, which is returned to the pan after the removal of the good soap.
Second. The good settled soap, testing 62-63 per cent. fatty acids. The subject of removing and treatment of this layer is fully dealt with in the next chapter.
Third. A layer of darker weak soap, termed "nigre," which on an average tests 33 per cent. fatty acids, and, according to the particular fit employed, will amount to from 15-20 per cent. of the total quantity of soap in the pan.
The quantity of nigre may vary not only with the amount of water added during finishing, but is also influenced by the amount of caustic alkali remaining in the soap paste prior to fitting. If the free caustic alkali-content is high, the soap will require a large amount of water to attain the desired fit. This water renders the caustic into a lye sufficiently weak to dissolve a quantity of soap, consequently, as the "nigre" is a weak solution of soap together with any excess of alkali (caustic or carbonate) and salt which gravitates during the settling, the quantity is increased.
Fourth. A solution containing alkaline salts, mostly carbonates and chlorides, with a little caustic.
The amount of the layer is very variable, and doubtless, under certain physical conditions, this liquor has separated from the nigre.
Utilisation of Nigres.--The nigres are boiled and the liquor separated by graining with salt. Nigre may be utilised in various ways.
(1) It may be used several times with new materials. This particularly refers to soaps of the "Washer" type. The colour of the nigre will determine the number of times it can be employed.
(2) It may be incorporated with a soap of a lower grade than the one from which it was obtained. In this case a system is generally adopted; for example, soap of the best quality is made in a clean pan, the nigre remaining is worked up with fresh material for soap of the next quality, the nigre from that boil, in its turn, is admixed with a charge to produce a batch of third quality, and the deposited nigre from this is again used for a fourth quality soap--the nigre obtained from this latter boil would probably be transferred into the cheapened "washer" or perhaps if it was dark in colour into the brown soap-pan.
(3) The nigre may be fitted and produce a soap similar to the original soap from which it was deposited. It is advisable to saponify a little fat with it.
(4) Nigres from several boils of the same kind of soap can be collected, boiled, and fitted. The settled portion may be incorporated with a new charging to keep the resultant soap uniform in colour--unless this is done, the difference in colour between boils from new materials alone, and those containing nigre, is very noticeable. The nigre settled from this fitted nigre boil would be utilised in brown soap.
(5) According to its colour, and consistence, a nigre may be suitable for the production of disinfectant, or cold-water soaps.
(6) Nigre may be bleached by treatment with a 20 per cent. solution of stannous chloride--1 cwt. of this solution (previously heated) is sufficient to bleach 20 tons of nigre.
Transparent Soaps.--The production of transparent soaps has recently been fully studied, from a theoretical point of view, by Richardson (J. Amer. Chem. Soc., 1908, pp. 414-20), who concludes that the function of substances inducing transparency, is to produce a jelly and retard crystallisation.
The old-fashioned transparent soap is prepared by dissolving, previously dried, genuine yellow soap in alcohol, and allowing the insoluble saline impurities to be deposited and removed. The alcoholic soap solution is then placed in a distillation apparatus, or the pan containing the solution is attached by means of a still head to a condenser, and the alcohol distilled, condensed and regained. The remaining liquid soap, which may be coloured and perfumed, is run into frames and allowed to solidify.
The resultant mass is somewhat turbid, but after storage in a room at 95° F. (35° C.) for several months, becomes transparent.
The formation of the transparency is sometimes assisted and hastened by the addition of glycerine or a solution of cane-sugar.
A patent has been granted to A. Ruch (Fr. Pat. 327,293, 1902) for the manufacture of transparent glycerine soap by heating in a closed vessel fatty acids together with the requisite quantity of alcoholic caustic soda solution necessary for saponification, and cooling the resultant soap. It is also proposed to add sugar solution.
Cheaper qualities of transparent soaps are made by the cold process with or without the aid of alcohol and castor oil, and with the assistance of glycerine or cane-sugar.
With the continual demand for cheaper production, sugar solution has gradually, in conjunction with castor oil, which produces transparency, superseded the use of alcohol and glycerine.
For a small batch, 56 lb. Cochin cocoa-nut oil and 56 lb. sweet edible tallow may be taken, melted at 130° F. (54° C.), and carefully strained into a small steam-jacketed pan. It is imperative that the materials should be of the highest quality and perfectly clean. Twenty-three lb. of pure glycerine and 56 lb. of bright caustic soda solution made from high grade caustic and having a density of 72° Tw. (38° B.) are crutched into the fat; the alcohol, which would be 45 lb. in this example, is then added. The whole must be most intimately incorporated, and the pan covered and allowed to rest for one hour or one and a half hours.
Saponification should ensue.
To produce a transparent glycerine soap with the aid of castor oil, and with or without the use of alcohol, the following is the procedure:--
Cochin cocoa-nut oil, sweet edible tallow, and castor oil, of each 56 lb. are taken, warmed to 130° F. (54° C.), and carefully strained into the jacketed pan. If it is desired to use glycerine and cane sugar solution, and no alcohol, the glycerine (25 lb.) is now stirred into the fats together with the requisite (83 lb.) caustic soda solution 72° Tw. (38° B.). If it is intended to use alcohol and sugar, and no glycerine, the latter is replaced by 47 lb. of alcohol, and added after the incorporation of the caustic soda lye.
The whole being thoroughly crutched, the pan is covered and saponification allowed to proceed for one hour or one and a half hours.
Should the saponification for some reason be retarded, a little steam may be very cautiously admitted to the jacket of the pan, the mass well crutched until the reaction commences, and the whole allowed to rest the specified time.
Whilst saponification is proceeding, the "sugar solution" is prepared by dissolving 50 lb. cane sugar in 50 lb. water, at 168° F. (76° C.), to which may be added 5 lb. soda crystals, and any necessary colouring matter. The water used for this solution should be as soft as possible, as hard water is liable to produce opaque streaks of lime soap.
It is absolutely necessary before proceeding further to ensure that saponification is complete. A greasy, soft feel and the presence of "strength" (caustic) would denote incomplete saponification--this can only be remedied by further heating and crutching. Deficiency of caustic alkali should also be avoided, and, if more lye is required, great care must be exercised in its addition.
Saponification being completed, the sugar solution is carefully and gradually crutched into the soap; when the contents of the pan have become a homogeneous and syrupy mass, the crutching is discontinued, and the pan is covered for one hour. The heat of the soap in the pan should not exceed 170° F. (77° C.).
Having rested the necessary period, the soap will have a slight froth on the surface, but will be clear underneath and appear dark. Samples may now be withdrawn, cooled, and examined prior to framing. If the process has been successfully performed the soap will be firm and transparent, of uniform colour, and possess only a faintly alkaline taste.
If the sample be firm but opaque, more sugar solution is required; this should be added very carefully whilst crutching, an excess being specially guarded against. If the sample be soft, although transparent, and the alkaline taste not too pronounced, the soap evidently contains an excess of water, which may be remedied by the addition of a small quantity of soda ash; too much soda ash (carbonates) must be avoided, lest it should produce efflorescence.
Having examined the soap and found it to be correct, or having remedied its defects, the soap in the pan is allowed to cool to 145° F. (63° C.) and perfume added. The soap is now quickly filled into narrow frames and allowed to cool rapidly.
The blocks of soap should not be stripped until quite cold throughout, and they should be allowed to stand open for a while before slabbing.
When freshly cut into tablets, the soap may appear somewhat turbid, but the brightness comes with the exposure it will receive prior to stamping and wrapping.
Saponifying Mineral Oil.--This sounds somewhat incongruous, as mineral oil is entirely unsaponifiable. Most of the suggestions for this purpose consist of the incorporation of mineral oil, or mineral oil emulsified by aid of Quillaia bark, with a cocoa-nut oil soap, and in all these instances the hydrocarbon merely exists in suspension.
G. Reale (Fr. Pat. 321,510, 1902), however, proposes to heat mineral oil together with spermaceti and strong alkali, and states that he transforms the hydrocarbons into alcohols, and these, absorbing oxygen, become fatty acids, which are converted into soap by means of the alkali.
In this connection may be quoted the interesting work of Zelinsky (Russ. Phys. Chem. Ges. Zeits. Angew. Chem., 1903, 37). He obtained substances, by acting with carbon dioxide upon magnesia compounds of chlorinated fractions of petroleum, which when decomposed by dilute sulphuric acid, yielded various organic acids. One of these acids on heating with glycerine formed tri-octin, which had the properties of a fat.
Dr. Engler, in confirmation of the theory of the animal origin of some petroleums, obtained what might be described as petroleum (for it contained almost all the hydrocarbons present in the natural mineral oil) by distilling animal fats and oils under pressure.
Electrical Production of Soap.--Attempts have been made to produce soap electrically by Messrs. Nodon, Brettonneau and Shee (Eng. Pat. 22,129, 1897), and also by Messrs. Merry and Noble (Eng. Pat. 2,372, 1900).
In the former patent, a mixture of soda-lye and fat is agitated by electricity at a temperature of 194°-212° F. (90°-100° C.), while in the latter caustic alkali is electrolytically produced from brine, and deposited on wire-netting in the presence of fat, which is thereby saponified.
CHAPTER VI.
TREATMENT OF SETTLED SOAP.
Cleansing--Crutching--Liquoring of
Soaps--Filling--Neutralising, Colouring and
Perfuming--Disinfectant Soaps--Framing--Slabbing--Barring--Open
and Close Piling--Drying--Stamping--Cooling.
Cleansing.--After completion of saponification, and allowing the contents of the pan to settle into the various layers, as described in the preceding chapter, the actual soap, forming the second layer, is now transferred to the frames, this being generally termed "cleansing" the soap. The thin crust or layer at the top of the pan is gently removed, and the soap may be either ladled out and conveyed to the frames, or withdrawn by the aid of a pump from above the nigre through a skimmer (Fig. 1), and pipe, attached by means of a swivel joint (Fig. 2) (which allows the skimmer pipe to be raised or lowered at will by means of a winch, Fig.
3), to a pipe fitted in the side of the pan as fully shown in Fig. 4, or the removal may be performed by gravitation through some mechanical device from the side of the copper.
[Illustration: FIG. 1.--Skimmer, with flange for attachment to skimmer-pipe.]
Every precaution is taken to avoid the presence of nigre in the soap being cleansed.
[Illustration: FIG. 2.--Swivel-joint.]
The temperature at which soap may be cleansed depends on the particular grade--soaps requiring to be liquored should not be cleansed too hot or a separation will take place, 150° F. (66° C.) may be taken as a suitable temperature for this class of soap; in the case of firm soaps, such as milling base, where cooling is liable to take place in the pan (and thus affect the yield), the temperature may be 165°-170° F. (74°-77° C.). This latter class of soap is generally run direct to the frames and crutched by hand, or, to save manual labour, it may be run into a power-driven crutching pan (neutralising material being added if necessary) and stirred a few times before framing.
[Illustration: FIG. 3.--Winch.]
[Illustration: FIG. 4.--Soap-boiling pan, showing skimmer pipe, swivel and winch.]
[Illustration: FIG. 5.--Hand crutch.]
[Illustration: FIG. 6.--Mechanical crutcher.]
Crutching.--This consists of stirring the hot soap in the frames by hand crutches (Fig. 5) until the temperature is sufficiently lowered and the soap begins to assume a "ropiness". Crutching may also be performed mechanically. There are various types of mechanical crutchers, stationary and travelling. They may be cylindrical pans, jacketed or otherwise, in the centre of which is rotated an agitator, consisting of a vertical or horizontal shaft carrying several blades (Fig. 6) or the agitator may take the form of an Archimedean screw working in a cylinder (Fig. 7).
[Illustration: FIG. 7.--Mechanical crutcher.]
The kind of soap to be crutched, whether thin or stiff, will determine the most suitable type for the purpose. The former class includes "washer" soap which is generally neutralised, and coloured and perfumed, if necessary, in these crutching pans, and in that case they are merely used for mixing the liquids with the hot soap prior to its passage along wooden spouts (Fig. 8) provided with outlets over the frames, in which the crutching is continued by hand.
In the case of stiff soaps requiring complete incorporation of liquor, the screw type is preferable, the soap being forced upwards by the screw, and descending between the cylinder and the sides of the pan, while the reverse action can also be brought into play. The completion of crutching is indicated by the smoothness and stiffness of the soap when moved with a trowel, and a portion taken out at this point and cooled should present a rounded appearance.
When well mixed the resultant product is emptied directly into wheel-frames placed underneath the outlet of the pan. It is important that the blades or worm of the agitating gear be covered with soap to avoid the occlusion of air and to prevent the soap becoming soft and spongy.
[Illustration: FIG. 8.--Wooden soap spout.]
Liquoring of Soaps.--This consists of the addition of various alkaline solutions to soap to produce different qualities, and is best performed in the crutching machines, although it is in some instances carried out in the frames. In the history of soap-making a large number and variety of substances have been suggested for the purpose of accomplishing some real or supposed desirable effect when added to soap. Many of these have had only a very short existence, and others have gradually fallen out of use.
Amongst the more practical additions most frequently adopted may be mentioned carbonate of soda, silicate of soda, and pearl ash (impure carbonate of potash). The carbonate of soda may be used in the form of "soda crystals," which, containing 62.9 per cent. of water, dissolves in its own water of crystallisation on heating, and is in that manner added to the hot soap. In the case of weak-bodied soap, this addition gives firmness and tends to increase the detergent qualities.
The soda carbonate may also be added to soap as a solution of soda ash (58° alkali) either concentrated, 62° Tw. (34° B.), or of various strengths from 25° Tw. (16° B.) upwards. This solution stiffens and hardens soap, and the addition, which must not be excessive, or efflorescence will occur, is generally made at a temperature of 140° F. (60° C.). Care should always be taken in the choice of solutions for liquoring. Strong soda ash solution with a firm soap will result in a brittle product, whereas the texture of a weak soap would be greatly improved by such addition.
A slight addition of a weak solution of pearl ash, 4°-8° Tw. (2.7-5.4° B.), improves the appearance of many soaps intended for household purposes.
For yellow soaps, containing a low percentage of fatty acids, solutions of silicate of soda of varying strengths are generally used.
It is always advisable to have a test sample made with the soap to ascertain what proportion and what strength of sodium silicate solution is best suited for the grade of soap it is desired to produce. It is important that the soap to be "silicated" should be distinctly alkaline (i.e., have a distinct caustic taste), or the resultant soap is liable to become like stone with age. The alkaline silicate of soda (140° Tw., 59.5° B.) is the quality most convenient for yellow soaps; this may be diluted to the desired gravity by boiling with water.
For a reduction of 3-4 per cent. fatty acids content, a solution of 6° Tw. (4° B.) (boiling) is most suitable, and if the reduction desired is greater, the density of the silicate solution should be increased; for example, to effect a reduction of 20 per cent. fatty acids content, a solution of 18° Tw. (12° B.) (boiling) would probably be found to answer.
In some instances 140° Tw. (59.5° B.) silicate may be added; experiment alone will demonstrate the amount which can be satisfactorily incorporated without the soap becoming "open," but 1/10 of the quantity of soap taken is practically a limit, and it will be found that the temperature should be low; the same quantity of silicate at different temperatures does not produce the same result. Various other strengths of sodium silicate are employed, depending upon the composition and body of the soap base--neutral silicate 75° Tw.
(39.4° B.) also finds favour with some soap-makers. Mixtures of soda crystals or soda ash solution with silicate of soda solution are used for a certain grade of soap, which is crutched until smooth and stiff. Glauber's salt (sodium sulphate) produces a good smooth surface when added to soap, but, owing to its tendency to effloresce more quickly than soda carbonate, it is not so much used as formerly.
Common salt sometimes forms an ingredient in liquoring mixtures.
Potassium chloride and potassium silicate find a limited use for intermixing with soft soaps.
It will be readily understood that hard and fast rules cannot be laid down for "liquoring" soap, and the correct solution to be employed can only be ascertained by experiment and experience, but the above suggestions will prove useful as a guide towards good results. A smooth, firm soap of clear, bright, glossy appearance is what should be aimed at.
Filling.--Some low-grade soaps contain filling, which serves no useful purpose beyond the addition of weight. Talc is the most frequently used article of this description. It consists of hydrated silicate of magnesium and, when finely ground, is white and greasy to the touch. The addition of this substance to the hot soap is made by suspending it in silicate of soda solution.
Whatever filling material is used, it is important that the appearance of the soap should not be materially altered.
Neutralising, Colouring and Perfuming.--The free caustic alkali in soap, intended for toilet or laundry purposes, is usually neutralised during the cleansing, although some soap manufacturers prefer to accomplish this during the milling operation. Various materials have been recommended for the purpose, those in most general use being sodium bicarbonate, boric acid, cocoa-nut oil, stearic acid, and oleic acid.
The best method is the addition of an exact quantity of sodium bicarbonate (acid sodium carbonate), which converts the caustic alkali into carbonate. The reaction may be expressed by the equation:--
NaOH + NaHCO_{3} = Na_{2}CO_{3} + H_{2}O
Caustic soda Bicarbonate of soda Carbonate of soda Water
Boric acid in aqueous or glycerine solutions, and borax (biborate of soda) are sometimes used, but care is necessary in employing these substances, as any excess is liable to decompose the soap.
The addition of cocoa-nut oil is unsatisfactory, the great objection being that complete saponification is difficult to ensure, and, further, there is always the liability of rancidity developing. Stearic and oleic acids are more suitable for the purpose, but oleic acid has the disadvantage that oleates are very liable to go rancid.
A large number of other substances have been proposed, and in many instances patented, for neutralising the free caustic alkali. Among these may be mentioned--Alder Wright's method of using an ammoniacal salt, the acid radicle of which neutralises the caustic alkali, ammonia being liberated; the use of sodium and potassium bibasic phosphate (Eng.
Pat. 25,357, 1899); a substance formed by treating albumen with formalin (Eng. Pat., 8,582, 1900); wheat glutenin "albuminoses" (albumen after acid or alkaline treatment); malt extract; and egg, milk, or vegetable albumen.
The colouring matter used may be of either vegetable or coal-tar origin, and is dissolved in the most suitable medium (lye, water, or fat). The older types of colouring matter--such as cadmium yellow, ochres, vermilion, umbers--have been superseded.
In the production of washer household soaps, a small quantity of perfume is sometimes added.
Disinfectant Soaps.--To the soap base, which must be strong to taste, is added from 3 to 4 per cent. of coal-tar derivatives, such as carbolic acid, cresylic acid, creosote, naphthalene, or compounds containing carbolic acid and its homologues. The incorporation is made in the crutching pan, and further crutching may be given by hand in the frames.
Framing.--The object of framing is to allow the soap to solidify into blocks. The frames intended for mottled soaps, which require slow cooling, are constructed of wood, often with a well in the base to allow excess of lye to accumulate--for other soaps, iron frames are in general use. The frame manufactured by H. D. Morgan of Liverpool is shown in Fig. 9.
As soon as the frame is filled, or as soon as the crutching in the frame is finished, the soap is smoothed by means of a trowel, leaving in the centre a heap which slopes towards the sides. Next day the top of the soap is straightened or flattened with a wooden mallet, this treatment assisting in the consolidation.
[Illustration: FIG. 9.--Soap frame.]
[Illustration: FIG. 10.--Slabbing machine.]
The length of time the soap should remain in frames is dependent on the quality, quantity, and season or temperature, and varies usually from three to seven days. When the requisite period has elapsed, the sides and ends of the frames are removed, and there remains a solid block of soap weighing from 10 to 15 cwt. according to the size of frame used.
The blocks, after scraping and trimming, are ready for cutting into slabs.
Slabbing.--This may be done mechanically by pushing the block of soap through a framework containing pianoforte wires fixed at equi-distances (Fig. 10, which shows a machine designed by E. Forshaw & Son, Ltd.), or the soap may be out by hand by pulling a looped wire through the mass horizontally along lines previously scribed, or, for a standard sized slab, the wire may be a fixture in a box-like arrangement, which is passed along the top of the soap, and the distance of the wire from the top of the box will be the thickness of the slab (Fig. 11).
[Illustration: FIG. 11.--Banjo slabber.]
All tallow soaps should be slabbed whilst still warm, cut into bars, and open-piled immediately; if this type of soap is cold when slabbed its appearance will be very much altered.
Barring.--The slabs are out transversely into bars by means of the looped wire, or more usually by a machine (Fig. 12), the lower framework of which, containing wires, is drawn through the soap placed on the base-board; the framework is raised, and the bars fall upon the shelf, ready for transference into piles. It has long been the custom in England to cut bars of soap 15 inches long, and weighing 3 lb. each, or 37-1/2 bars of soap to the cwt., but in recent years a demand has arisen for bars of so many various weights that it must be sometimes a difficult matter to know what sizes to stock.
In another type of barring machine, portions of the slab, previously cut to size, are pushed against a framework carrying wires, and the bars slide along a table ready for handling (Fig. 13).
In cutting machines, through which "washer" household soap is being passed, the bar is pushed at right angles through another frame containing wires, which divides it into tablets; these may be received upon racks and are ready for drying and stamping. It is needless to say that the slabs and tablets are cut with a view to reducing the amount of waste to the lowest possible limit. Such a machine, made by E. Forshaw & Son, Ltd., is shown in Fig. 14.
[Illustration: FIG. 12.--Barring machine.]
[Illustration: FIG. 13.--Bar-cutting machine.]
[Illustration: FIG. 14.--Tablet-cutting machine.]
Open- and Close-piling.--As remarked previously, tallow soaps should be cut whilst warm, and the bars "open-piled," or stacked across each other in such a way that air has free access to each bar for a day. The bar of soap will skin or case-harden, and next day may be "close-piled," or placed in the storage bins, where they should remain for two or three weeks, when they will be in perfect condition for packing into boxes ready for distribution.
[Illustration: FIG. 15.--Soap stamp.]
Drying.--"Oil soaps," as soaps of the washer type are termed, do not skin sufficiently by the open-piling treatment, and are generally exposed on racks to a current of hot air in a drying chamber in order to produce the skin, which prevents evaporation of water, and allows of an impression being given by the stamp without the soap adhering to the dies. It is of course understood that heavily liquored soaps are, as a rule, unsuitable for the drying treatment, as the bars become unshapely, and lose water rapidly.
Stamping.--Bar soaps are usually stamped by means of a hand-stamp containing removable or fixed brass letters (Fig. 15), with a certain brand or designation of quality and the name of the manufacturer or vendor, and are now ready for packing into boxes.
A very large bulk of the soap trade consists of the household quality in tablet form, readily divided into two cakes. These are stamped in the ordinary box moulds with two dies--top and bottom impressions--the die-plates, being removable, allow the impressions to be changed. This type of mould (Fig. 16) can be adjusted for the compression of tablets of varying thickness, the box preventing the escape of soap. We are indebted to E. Forshaw & Son, Ltd., for this illustration.
[Illustration: FIG. 16.--Box mould.]
The stamping machine may be worked by hand (Fig. 17) or power driven.
Where large quantities of a particular tablet have to be stamped, one of the many automatic mechanical stampers in existence may be employed, the tablets being conveyed to and from the dies by means of endless belts.
Such a machine is shown in the accompanying illustration (Fig. 18).
If necessary, the soap is transferred to racks and exposed to the air, after which it is ready for wrapping, which is generally performed by manual labour, although in some instances automatic wrapping machines are in use.
Cardboard cartons are also used for encasing the wrapped tablets, the object being that these are more conveniently handled by tradesmen and may be advantageously used to form an attractive window display.
Cooling.--Many attempts have been made to shorten the time required for the framing and finishing of soap, by cooling the liquid soap as it leaves the pan.
[Illustration: FIG. 17.--Soap-stamping machine, showing box mould.]
With milling base, this is successfully accomplished in the Cressonnières' plant, by allowing the hot soap to fall upon the periphery of a revolving drum which can be cooled internally by means of water.
[Illustration: FIG. 18.--Automatic stamper.]
In the case of household soaps, where the resultant product must be of good appearance and have a firm texture, the difficulty is to produce a bar fit for sale after the cooling has been performed, as soap which has been suddenly chilled lacks the appearance of that treated in the ordinary way.
Several patents have been granted for various methods of moulding into bars in tubes, where the hot soap is cooled by being either surrounded by running water in a machine of similar construction to a candle machine, or rotated through a cooling medium; and numerous claims have been made both for mechanical appliances and for methods of removing or discharging the bars after cooling. In many instances these have proved unsatisfactory, owing to fracture of the crystalline structure.
Moreover, in passing through some of the devices for solidification after chilling, the soap is churned by means of a worm or screw, and this interferes with the firmness of the finished bar, for, as is well known, soap which has been handled too much, does not regain its former firmness, and its appearance is rendered unsatisfactory.
A form of apparatus which is now giving satisfactory results is the Leimdoerfer continuous cooler (Fig. 19). This consists of a fixed charging hopper, A, a portable tank, B, containing tubes, and a detachable box, C, which can be raised or lowered by means of a screw, D.
The bottom of the hopper is fitted with holes corresponding with the cooling tubes, e, and closed by plugs c, attached to a frame b, which terminates above in a screw spindle a, by means of which the frame and plugs can be raised and lowered so as to permit or stop the outflow of soap into the cooling tubes. The tubes are closed at the bottom by slides d, and the box B, in which they are mounted, is carried on a truck running on rails.
The charging hopper can be connected with the soap-pan by a pipe, and when the hopper is filled with liquid soap the plugs c are raised and the air in the box C exhausted, thus causing the soap to descend into the cooling tubes.
[Illustration: FIG. 19.--Leimdoerfer cooler.]
The slides d are closed, the screw D released, and the box B moved away to make room for another. At the end of the rail track is an ejecting device which pushes the cooled soap out of the tubes, and the truck is run back on a side track to the machine for use over again. In this way the apparatus can be worked continuously, the soap being received from the cooling pipes on a suitable arrangement for transport to the press or store room.
A similar idea has been made the subject of a patent by Holoubek (Eng.
Pat. 24,440, 1904, Fig. 20). The soap is run into frames or moulds having open sides, which are closed by being clamped with screws and pressure plates between cooling tubes through which water circulates.
[Illustration: FIG. 20.--Holoubek's cooler.]
CHAPTER VII.
TOILET, TEXTILE AND MISCELLANEOUS SOAPS.
_Toilet Soaps--Cold Process
Edition notice Project Gutenberg source, credits & licence
The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.
Transcriber and production notes
Produced by Ben Beasley, Richard Prairie, Josephine Paolucci and the Online Distributed Proofreading Team at https://www.pgdp.net. (This file was produced from images generously made available by The Internet Archive/Million Book Project.)
Front matter as received (title page, contents)
THE HANDBOOK OF SOAP MANUFACTURE BY W. H. SIMMONS, B.Sc. (LOND.), F.C.S. AND H. A. APPLETON _WITH TWENTY-SEVEN ILLUSTRATIONS_ LONDON SCOTT, GREENWOOD & SON "THE OIL AND COLOUR TRADES JOURNAL" OFFICES 8 BROADWAY, LUDGATE HILL, E.C. 1908 [_All rights reserved_] Transcriber's note: For text: A word surrounded by a cedilla such as ~this~ signifies that the word is bolded in the text. A word surrounded by underscores like _this_ signifies the word is italics in the text. Greek letters are translated into English and are in brackets, e.g. [alpha]. For numbers and equations: Parentheses have been added to clarify fractions. Underscores before bracketed numbers/letters in equations denote a subscript. Footnotes have been moved to the end of the chapter and minor typos have been corrected.
Header as received
The Project Gutenberg eBook of The handbook of soap manufacture
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.
Title: The handbook of soap manufacture
Author: W. H. Simmons
H. A. Appleton
Release date: June 7, 2007 [eBook #21724]
Most recently updated: January 2, 2021
Language: English
Other information and formats: www.gutenberg.org/ebooks/21724
Credits: Produced by Ben Beasley, Richard Prairie, Josephine Paolucci
and the Online Distributed Proofreading Team at
https://www.pgdp.net. (This file was produced from images
generously made available by The Internet Archive/Million
Book Project.)Full Project Gutenberg licence
Updated editions will replace the previous one—the old editions will
be renamed.
Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for an eBook, except by following
the terms of the trademark license, including paying royalties for use
of the Project Gutenberg trademark. If you do not charge anything for
copies of this eBook, complying with the trademark license is very
easy. You may use this eBook for nearly any purpose such as creation
of derivative works, reports, performances and research. Project
Gutenberg eBooks may be modified and printed and given away—you may
do practically ANYTHING in the United States with eBooks not protected
by U.S. copyright law. Redistribution is subject to the trademark
license, especially commercial redistribution.
START: FULL LICENSE
THE FULL PROJECT GUTENBERG™ LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg™ mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase “Project
Gutenberg”), you agree to comply with all the terms of the Full
Project Gutenberg License available with this file or online at
www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project Gutenberg
electronic works
1.A. By reading or using any part of this Project Gutenberg
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the person
or entity to whom you paid the fee as set forth in paragraph 1.E.8.
1.B. “Project Gutenberg” is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg
electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation (“the
Foundation” or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg mission of promoting
free access to electronic works by freely sharing Project Gutenberg
works in compliance with the terms of this agreement for keeping the
Project Gutenberg name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg License when
you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg work. The Foundation makes no
representations concerning the copyright status of any work in any
country other than the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg License must appear
prominently whenever any copy of a Project Gutenberg work (any work
on which the phrase “Project Gutenberg” appears, or with which the
phrase “Project Gutenberg” is associated) is accessed, displayed,
performed, viewed, copied or distributed:
This eBook is for the use of anyone anywhere in the United States and most
other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg™ License included with this eBook or online
at www.gutenberg.org. If you
are not located in the United States, you will have to check the laws
of the country where you are located before using this eBook.
1.E.2. If an individual Project Gutenberg electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase “Project
Gutenberg” associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg
trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg License for all works
posted with the permission of the copyright holder found at the
beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg.
1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg License.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg work in a format
other than “Plain Vanilla ASCII” or other format used in the official
version posted on the official Project Gutenberg website
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original “Plain
Vanilla ASCII” or other form. Any alternate format must include the
full Project Gutenberg License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg works
unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg electronic works
provided that:
• You pay a royalty fee of 20% of the gross profits you derive from
the use of Project Gutenberg works calculated using the method
you already use to calculate your applicable taxes. The fee is owed
to the owner of the Project Gutenberg trademark, but he has
agreed to donate royalties under this paragraph to the Project
Gutenberg Literary Archive Foundation. Royalty payments must be paid
within 60 days following each date on which you prepare (or are
legally required to prepare) your periodic tax returns. Royalty
payments should be clearly marked as such and sent to the Project
Gutenberg Literary Archive Foundation at the address specified in
Section 4, “Information about donations to the Project Gutenberg
Literary Archive Foundation.”
• You provide a full refund of any money paid by a user who notifies
you in writing (or by e-mail) within 30 days of receipt that s/he
does not agree to the terms of the full Project Gutenberg™
License. You must require such a user to return or destroy all
copies of the works possessed in a physical medium and discontinue
all use of and all access to other copies of Project Gutenberg™
works.
• You provide, in accordance with paragraph 1.F.3, a full refund of
any money paid for a work or a replacement copy, if a defect in the
electronic work is discovered and reported to you within 90 days of
receipt of the work.
• You comply with all other terms of this agreement for free
distribution of Project Gutenberg™ works.
1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg™ electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from the Project Gutenberg Literary Archive Foundation, the manager of
the Project Gutenberg™ trademark. Contact the Foundation as set
forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg™ collection. Despite these efforts, Project Gutenberg™
electronic works, and the medium on which they may be stored, may
contain “Defects,” such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
of Replacement or Refund” described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg™ trademark, and any other party distributing a Project
Gutenberg™ electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg™ electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg™
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg work, and (c) any
Defect you cause.
Section 2. Information about the Mission of Project Gutenberg
Project Gutenberg is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.
Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg’s
goals and ensuring that the Project Gutenberg collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non-profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation’s EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state’s laws.
The Foundation’s business office is located at 41 Watchung Plaza #516,
Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
to date contact information can be found at the Foundation’s website
and official page at www.gutenberg.org/contact
Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation
Project Gutenberg™ depends upon and cannot survive without widespread
public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine-readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.
The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular state
visit www.gutenberg.org/donate.
While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.
International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate.
Section 5. General Information About Project Gutenberg electronic works
Professor Michael S. Hart was the originator of the Project
Gutenberg concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg eBooks with only a loose network of
volunteer support.
Project Gutenberg eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.
Most people start at our website which has the main PG search
facility: www.gutenberg.org.
This website includes information about Project Gutenberg,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.Source: Project Gutenberg ebook #21724. Public-domain status is recorded per item; the licence text above is reproduced unchanged.