
Gutenberg · ebook 20776
Encyclopedia of Needlework
by Thérèse de Dillmont · English · public domain in the US
Encyclopedia of Needlework by Thérèse de Dillmont is an English public-domain text held from Project Gutenberg (ebook #20776). * * * * *
352.[A]]
OPEN-WORK INSERTION (figs. 76 and 77).—For both these, the edges are to be overcast, and the darning stitches packed sufficiently closely together, for the threads of the stuff to be entirely covered.
Fig. 76 requires the drawing out of eighteen threads, fig. 77, of thirty. Both admit of several colours being used.
[Illustration: FIG. 76. OPEN-WORK INSERTION.]
[Illustration: FIG. 77. OPEN-WORK INSERTION.]
OPEN-WORK INSERTION (fig. 78).—After drawing out sixteen or eighteen threads, bind both sides with stitches made over four horizontal and four perpendicular threads, as follows; make one back-stitch over four disengaged threads, then bring up your thread from right to left, over four horizontal and under four perpendicular threads, back over the four last threads, and draw it out beside the next cluster. The clusters, as they now stand, are bound together in the middle, three by three, with darning-stitches. The thread must be fastened in and cut off, after each group is finished.
[Illustration: FIG. 78. OPEN-WORK INSERTION.]
OPEN-WORK INSERTION (fig. 79).—First bind the two edges with stitches, in the ordinary way. At the last stitch introduce the thread slanting, according to the dotted line, pass it under four horizontal and three perpendicular threads of the stuff and draw it out; then over three threads from right to left, and back under the same, from left to right, and out again; over four horizontal threads, and, under and again over, three perpendicular ones; for the next stitch, you again follow the dotted slanting line.
[Illustration: FIG. 79. OPEN-WORK INSERTION.]
Then make the darning stitch over nine threads, or three clusters. At half their length, you leave out three threads, first on the right, then on the left, whilst in the other half, you, in a similar manner, take in three; so that you have two darned and two undarned clusters, standing opposite each other. Finally, you overcast the single clusters, and connect every two with a lock-stitch, as shown in the accompanying illustration.
OPEN-WORK INSERTION (fig. 80).—Draw out twenty threads, overcast both edges with stitches, made over three threads. Then, make slanting stitches, proceeding out from these, over three, six and nine threads respectively, all three terminating in a perpendicular line, one below the other.
[Illustration: FIG. 80. OPEN-WORK INSERTION.]
For the open-work, twist the thread five times, quite tightly round and round one cluster, bring it to the edge, between the second and third clusters, and connect these by means of six darning-stitches to and fro: join the first and second clusters in the same way by twelve stitches, and finish, by twisting the thread five times round the remaining length of the first cluster. The second half of the open-work figure is carried out in a similar manner over the third and fourth clusters.
OPEN-WORK INSERTION IN FOUR COLOURS (fig. 81).—Draw out, from twenty-five to thirty threads. The outside figures are executed over six clusters, of three threads each, in a dark and light shade alternately of the same colour. Each of the middle figures combines three clusters of the two figures above it, and may be executed, either in a different colour altogether, or in a lighter shade of the one employed in the top row. The little star in the centre should be worked in dark red, or black.
[Illustration: FIG. 81. OPEN-WORK INSERTION IN FOUR COLOURS.
MATERIALS: Coton à broder D.M.C No. 20, or Cordonnet 6 fils D.M.C Nos. 15 to 30.[A]
COLOURS: Rouge-Turc 321, Bleu-Indigo 312, 334, Noir grand Teint 310.[A]]
OPEN-WORK INSERTIONS (figs. 82, 83, 84).—For each of these draw out forty threads. Fig. 82 worked in white, and Rouge-Grenat clair 309, comprises fourteen clusters, of four threads each. Begin at the top of the big pyramid, so that the threads which you run in, can be more closely crowded together.
[Illustration: FIG. 82. OPEN-WORK INSERTION.]
In fig. 83, the two rows of short clusters are worked in Gris-Tilleul moyen, and, Gris-Tilleul clair, 392 and 330;[A] the pyramid of steps, in Brun-Chamois moyen, 324;[A] the three inner clusters in Brim-Chamois très clair, 418. One figure consists of fourteen clusters, of three threads each.
[Illustration: FIG. 83. OPEN-WORK INSERTION.]
Fig. 84 also is to be worked in three colours; the light squares in unbleached cotton, the middle figure in Bleu-Indigo très clair, 334, the large squares on either side in Brun-Cuir clair 432. Each figure contains eighteen clusters, of three threads each.
[Illustration: FIG. 84. OPEN-WORK INSERTION.]
OPEN-WORK INSERTION WITH SPIDERS (fig. 85).—The edges are to be herring-boned, as described in fig. 39. In the middle, the so-called spiders are made, over every group of four clusters. The thread that runs out from the spider, passes over two clusters and under one, and then three or four times, over and under the clusters, as in darning, and so back, under the spider, at the place at which it was drawn in, and then on, to the next four strands of thread.
[Illustration: FIG. 85. OPEN-WORK INSERTION WITH SPIDERS.]
THREE-ROWED OPEN-WORK (fig. 86).—Draw out five threads for the narrow stripe, and from fourteen to sixteen for the wide one. Each cluster should consist of four threads. The narrow bands between, are to be herring-boned on either side. The dotted line shows the course of the thread, on the wrong side. Then unite each separate cluster in the middle, with a back-stitch, as shown in the illustration, and finally, join every group of four clusters together, with three stitches, and make a spider in the middle of the open-work, at the point where the threads intersect each other.
[Illustration: FIG. 86. THREE-ROWED OPEN-WORK.]
OPEN-WORK INSERTION WITH RINGS (fig. 87).—Bind the edges on both sides, with straight, two-sided, stitches. Take, for this, Coton à broder D.M.C, No. 30, (embroidery cotton), using it double. Draw out, from twenty-four to thirty threads. Wind your thread six or seven times round the middle of each cluster of nine threads, and then make darning-stitches, above and below, to a length of 3 m/m. When you have completed two clusters, join them together, by four interlocked stitches; wind your thread three times round the single thread, and sew it over with close stitches.
[Illustration: FIG. 87. OPEN-WORK INSERTION WITH RINGS.]
OPEN-WORK INSERTION WITH SPIDERS (fig. 88).—Draw out twenty-four threads. Ornament the two edges with half-spiders. You begin these over two threads, and go on taking in others, to the number of eight. The whole spider in the middle, is made as above described.
[Illustration: FIG. 88. OPEN-WORK INSERTION WITH SPIDERS.]
OPEN-WORK INSERTION (figs. 89 and 90).—The beauty of this otherwise simple pattern, lies in the peculiar knot, with which the edges of the stuff are ornamented.
[Illustration: FIG. 89. OPEN-WORK INSERTION.]
Carry the working thread, as shown in fig. 90, from right to left, (see the description of the right side) over and under four threads; then bring the needle back, under the thread which lies slanting, form a loop with the forefinger of the left hand, slip it on to the needle, and draw it up close to the first stitch; pull the needle through the knot, and proceed to the next stitch.
The illustration explains how the open-work in the middle should be carried out.
[Illustration: FIG. 90. EXPLANATION OF THE STITCH FOR FIG. 89.]
OPEN-WORK WITH WINDING STITCH (fig. 91).—For this pattern, which is a very laborious one to work, draw out twenty-eight threads. Bind the edges with two-sided stitches, over two, three, four and five threads, respectively. For the middle figures, you must reckon four threads for the clusters, round which the working thread is tightly twisted, eight for the darned clusters, ornamented with picots (see fig. 165), and sixteen for the rectangular rosettes, in two colours.
Make a loose spider over the threads, as a background for the rosette.
Work the picots in a different colour from the cluster, and the rosettes, likewise, in two colours. The connecting loops between the figures should be made as you go along, the thread being always carried back into the loop just made.
[Illustration: FIG. 91. OPEN-WORK WITH WINDING STITCH.]
CUTTING OUT THREADS AT THE CORNERS (figs. 92, 93, 94, 95). If you want to carry a latticed-hem or a simple open-work pattern, round a corner, you must cut and loosen the threads, on both sides, about one c/m. from the edge of the hem, as seen in fig. 92. The loose threads can be pushed into the turning, and the edge button-holed, as in fig. 93.
If however, on the other hand, the stitching be continued without interruption, as indicated in the upper part of fig. 94, the loose threads must be brought to the wrong side, and as represented in the lower part of fig. 94, fastened down with a few stitches.
[Illustration: FIG. 92. THE CUTTING AND LOOSENING OF THE THREADS AT THE CORNERS.]
[Illustration: FIG. 93. THE OVER CASTING OF THE DISENGAGED EDGE AT THE CORNER, THE THREADS BEING TURNED IN WITHIN THE HEM.]
[Illustration: FIG. 94. BORDERING THE DISENGAGED EDGE WITH
HEM-STITCHING, THE THREADS BEING TURNED OVER]
[Illustration: FIG. 95. FILLING IN THE CORNER WITH A SPIDER, AND CONTINUATION OF THE LATTICE-WORK THENCE.]
CUT OPEN-WORK (PUNTO TAGLIATO).—For cut open-work, threads have to be drawn out both ways, the number of course to depend on the pattern.
Threads, left between others that have been cut out, serve as a foundation on which a great variety of stitches can be worked. Stuffs, equally coarse in the warp and woof, should be chosen for all cut open-work, for then the empty spaces that remain, where threads have been drawn out both ways, will be perfectly square.
DRAWING OUT THREADS BOTH WAYS (fig. 96).—The same number of threads must be drawn out each way; most patterns require the same number of threads to be left as are drawn out. In fig. 96, three threads have been drawn out and three left.
[Illustration: FIG. 96. DRAWING OUT THREADS BOTH WAYS, WITHOUT REGARD TO THE EDGES.]
CUTTING OUT THREADS (fig. 97).—We often meet with cut open-work patterns, set in another kind of embroidery. In such cases, the threads that are to be cut out, must be cut a few millimetres within the edge, and then drawn out, so that there may be a frame of the stuff left intact outside.
[Illustration: FIG. 97. CUTTING OUT THREADS, IN THE MIDDLE OF THE STUFF.]
BUTTON-HOLING THE RAW EDGES (fig. 98).—In very fine linen textures, the threads can simply be cut out, but in the case of coarser stuffs, and when a pattern ends in steps as in figs. 103, 104, 105, the raw edges must be button-holed as in fig. 98, or 99.
[Illustration: FIG. 98. BUTTON-HOLING THE RAW EDGES OF CUT OPEN-WORK.]
OVERCASTING THE RAW EDGES (fig. 99).—Cording the raw edges, is even better than button-holing them. Count the number of threads carefully that have to be cut out, run in a thread to mark the pattern, and then only, cut the threads through, at least two threads within the line.
[Illustration: FIG. 99. OVERCASTING THE RAW EDGES OF CUT OPEN-WORK.]
OVERCASTING THE TRELLISED GROUND (fig. 100).—If you only have a small surface to embroider, you can draw out all the threads at once. But in the case of a large piece of work it is better to begin by removing the threads in one direction only, and completing all the little bars, one way first; after which you draw out the threads the other way and embroider those you leave. In this way you will secure greater equality and finish in your work.
[Illustration: FIG. 100. OVERCASTING THE TRELLISED GROUND.]
GROUND FOR SQUARE, FIG. 105 (figs. 101 and 102).—Finish the first row of bars along the edge completely, to begin with. In the second row, overcast the bar, down to half its length, then carry your thread over two empty spaces, see the letter a, come back to the bar, overcasting the thread which you threw across first, and passing the needle under the bars of the stuff. In the second rows that intersect the first, marked by letter b, the threads meet in the middle of the empty space.
In fig. 102, finish the bars, overcast both ways first, and then fill in the ground with interlaced threads, worked row by row, throwing the thread from one square to the other as you go, and doubling it, as you return. For the bars, see the chapters on net embroidery, and Irish lace.
[Illustration: FIG. 101. LATTICE-GROUND FOR SQUARE IN FIG. 105, SHOWING THE COURSE OF THE STITCHES.]
[Illustration: FIG. 102. LATTICE-GROUND FOR SQUARE IN FIG. 105.]
LATTICE-GROUND AND DAMASK STITCH FOR SQUARE, FIG. 105 (fig. 103).—Our
illustration shows a third kind of openwork ground with one corner in damask stitch, of the square represented in fig. 105. The little bars which intersect each square crossways, are made in two divisions, by carrying the thread to the opposite bar and back. In the same way, the second thread is carried over the first. The damask stitches are described in the next chapter, in figs. 143 and 144.
[Illustration: FIG. 103. LATTICE-GROUND WITH A PORTION OF SQUARE, FIG. 105.]
LATTICE-GROUND AND DAMASK STITCHES FOR SQUARE, FIG. 105 (fig. 104).—Damask, or gobelin stitches, are given in figs. 152, 153, 154.
The ground of this part of the square (fig. 104) is adorned with narrow bars, worked in darning stitch. From the centre of one bar, proceed three bars made on three foundation-threads, and a fourth made on two, on account of the passage to the next bar.
[Illustration: FIG. 104. LATTICE-GROUND AND DAMASK STITCH FOR SQUARE, FIG. 105.]
QUARTER OF THE SQUARE IN SINGLE AND CUT OPEN-WORK, AND DAMASK-STITCH
(fig. 105).—Original size 48 c/m. square. This handsome square is worked in unbleached cotton on a white ground; it may also be worked in colours. A very good effect is produced by using Chiné d’or D.M.C[A] red, blue, or green for the gobelin stitch, and a uniform pale tint for the cut open-work.
Figs. 101, 102, 103, 104 illustrate in detail, one quarter of the square, which is represented here one third of the original size. The centre piece (fig. 104) is bordered by four stripes, two long and two short; the former containing two lozenge-shaped open-work figures separated and finished off by damask stitches; the latter, only one such figure. For the insertion in single open-work, that recurs three times, you will find a variety of designs in figs. 81, 82, 83, 84, 87, 88.
[Illustration: FIG. 105. QUARTER OF THE SQUARE IN SINGLE AND CUT OPEN-WORK, AND DAMASK STITCH.
Original size 48 c/m. square.
MATERIALS suitable for Holbein linen: Fil à pointer D.M.C No. 15 or 20, and Coton à repriser D.M.C No. 25.[A]
For antique linen: Fil à dentelle D.M.C No. 25 or 30, or Cordonnet 6 fils D.M.C No. 50, 60, or 70, and Coton à repriser D.M.C No. 50 or, in place of the latter, Coton à broder surfin D.M.C No. 190.[A]]
DRAWING IN THE PATTERN (fig. 106).—Darning in the threads, as you do into a net foundation is a slower process and one that requires greater skill than drawing them in. The illustration shows the proper order and direction of stitches for Fig. 108. In this case likewise, the little bars must be finished, before the actual pattern is filled in.
[Illustration: FIG. 106. DRAWING IN THE PATTERN. (Explanation of fig. 108)]
DARNING IN THE THREADS (fig. 107)—In old needle-work we often find the pattern reserved, that is, left blank and outlined by the grounding.
As it is difficult, especially in executing minute, and delicate figures, to withdraw the threads partially, without injuring the linen foundation, they are withdrawn throughout, and new ones drawn in, to form the pattern. To explain this more clearly, the original threads of the material are represented in a lighter shade than the new ones that are drawn in; the course of the stitches is indicated in a darker shade.
[Illustration: FIG. 107. DARNING IN THE THREADS. (Explanation of fig. 109).]
BROAD INSERTION IN CUT OPEN-WORK, WITH THE PATTERN DRAWN IN (fig. 108).—This insertion, suitable according to the foundation it is worked on, for the decoration either of curtains, table-covers, bed-linen or underclothing, is made as shown in fig. 106. If intended for the decoration of any article made of white linen, we recommend unbleached materials for the lattice-work, and bleached for the pattern, to bring it out in strong relief.
[Illustration: FIG. 108. BROAD INSERTION IN CUT OPEN-WORK, WITH PATTERN DRAWN IN.]
INSERTION IN CUT OPEN-WORK, WITH PATTERN DARNED IN (fig. 109).—This
insertion can be introduced into any kind of linen material, and used for ornamenting towels, aprons, bed-linen and table-linen. When it is used to connect bands of cross-stitch embroidery, the open-work should be of the same colour as the embroidery, and the pattern worked in white or unbleached cotton, to correspond with the foundation. In fig. 109, the pattern is half as large again as in the original.
[Illustration: FIG. 109. INSERTION IN CUT OPEN-WORK, WITH PATTERN DARNED IN.
MATERIALS—For Holbein linen: Fil à pointer D.M.C No. 15 or 20, Cordonnet 6 fils D.M.C No. 8, 10 or 15 for the bars.—Coton à tricoter D.M.C No. 16 or Coton à repriser D.M.C No. 12 or 25 for darning or drawing in the pattern.
For finer linens: Fil à dentelle D.M.C Nos. 25 to 30, or Cordonnet 6 fils D.M.C Nos. 25 to 40 for the bars and Coton à repriser D.M.C No. 50 for darning or drawing in the pattern.]
CUT OPEN-WORK PATTERN (figs. 110 and 111).—This pattern, more of the nature of lace than any of the former, is well adapted for trimming, not only household articles but also church furniture, altar-cloths and the like, which are required to wash, as it can be worked in any width.
Fig. 110, a magnified representation of the work in process of execution, shows alternately, ten threads withdrawn each way and six left, with open spaces between. The arcs are worked over three carefully laid threads, carried across from the middle of one bar to the middle of the bar at right angles to it, the wheels on the other hand are begun and finished at the same corner. Overcast the cut edges, and hem-stitch the outside layer of stuff (figs. 61 and 62).
[Illustration: FIG. 110. CUT OPEN-WORK PATTERN. Fig. 111 in process of execution.]
[Illustration: FIG. 111. CUT OPEN-WORK PATTERN. MATERIALS: Fil à pointer D.M.C No. 20 or 30, Cordonnet 6 fils D.M.C Nos. 15 to 50 or Fil à dentelle D.M.C Nos. 25 to 50.]
GREEK CUT OPEN-WORK PATTERN (fig. 112).—After the foregoing explanations, no difficulty will be found in copying the beautiful Greek cut open-work pattern, illustrated in fig. 112. Here, we have in the original, 48 threads drawn out in the middle, both ways, from one straight bar to another, (these bars being darned) with open spaces between; and in the lower and narrower division, 21 threads drawn out each way. The cut edges, from bar to bar, are hem-stitched on both sides, leaving four threads of the stuff between.
The long bars, in the second figure, are button holed on both sides, those with the picots, on one side only.
[Illustration: FIG. 112. GREEK CUT OPEN-WORK PATTERN. MATERIALS:
Cordonnet 6 fils D.M.C Nos. 25 to 50, Fil d’Alsace D.M.C Nos. 20 to 100 or Fil à dentelle D.M.C Nos. 25 to 50.]
FOOTNOTES:
[A] See, at the end of the concluding chapter, the table of numbers and sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: NET STRIPE, IN IMITATION OF BRUSSELS LACE.]
Net and damask stitches.
Many net embroidery patterns and damask stitches consist of a combination of ordinary running and darning, others of chain, stem and cross stitch.
NET EMBROIDERY.—All these kinds of stitches can be worked on the coarse Greek net, as it is called, as well as on the finest quality of real Brussels net.
Stripes of net, finished off with button-hole edging, and ornamented with one or other of the following patterns, make very pretty washing laces and the like; net laid upon Irish point and converted by needlework into a lace ground, makes an excellent substitute for a hand-made ground, which demands much labour and time.
MATERIALS SUITABLE FOR NET EMBROIDERY.—The choice of material must be determined by the quality of the net and the effect to be produced. For a coarse make of net and a very marked pattern, the lowest numbers of D.M.C cottons, or the narrowest braids, such as Soutache D.M.C Nos. 1, 2, 3 should be used; if the net be fine and the pattern a delicate one, then the higher numbers of the following are preferable: Coton à tricoter D.M.C Nos. 8 to 20, Coton à repriser D.M.C Nos. 25 to 70, Coton à broder D.M.C Nos. 16 to 50, Fil à dentelle D.M.C Nos. 25 to 50, Coton à broder surfin D.M.C Nos. 100, 120, 150.
The latter must be adjusted to the required size before being used, that is to say as many strands of it removed, as is necessary in order to reduce it to the proper thickness.
TRACING WITH RUNNING STITCHES (fig. 113).—Have your pattern traced on linen or paper; tack the net upon it, and copy it carefully on the net with running stitches. As in darning, the stitches must run first above and then beneath, alternating in each succeeding row. At the turn of the lines, the stitches cross each other, as shown in the illustration.
[Illustration: FIG. 113. TRACING WITH RUNNING STITCHES.]
NET PATTERN (fig. 114).—Here too the pattern is traced with running stitches, which are run in on both sides of each row of meshes. The thread is carried first to the right, and then to the left, under every alternate bar of the net and out again. Between the first and second rows, one thread of the foundation must be left uncovered. In the next row, the thread is carried back again, so that it encircles each mesh.
In the third row, the thread passes under the same bar of net as in the second, the threads touching each other. The fourth row is a repetition of the first.
[Illustration: FIG. 114. NET PATTERN.]
NET PATTERN (fig. 115).—This consists of two rows of stitches. In the first, the single stitches run diagonally from left to right, over and under a mesh; in the second row the triple stitches, also carried diagonally across a mesh, lie from right to left.
[Illustration: FIG. 115. NET PATTERN.]
NET PATTERN (fig. 116).—Begin with a double row, as in fig. 114; this is followed by a row of cross-stitch, touching the others, for which the thread has to be carried, first under one of the straight bars of the mesh and then diagonally, across it. A second, similar row of stitches backwards, completes the crosses. This can be further varied by the introduction of a row of triple stitches, after the double row, as in fig. 115, and the repetition of the two first only.
[Illustration: FIG. 116. NET PATTERN.]
These rows can also be worked in two colours, or in white thread and washing gold.
NET PATTERN (fig. 117).—Begin at the top, carrying the thread, first under and then over two bars and a mesh, and then underneath as before.
In the second as in the first row, the threads must be drawn in, so that 4 threads always meet in one mesh, and two run parallel to each other through the same mesh.
[Illustration: FIG. 117. NET PATTERN.]
NET PATTERN (fig. 118).—This pattern, which resembles fig. 117 in the execution, is thickened by triple stitches. Above, where in the preceding row three threads were laid, the thread should be single.
[Illustration: FIG. 118. NET PATTERN.]
Very pretty varieties are to be obtained by the introduction of several colours. Take white, for instance, for the first row, and different shades of the same colour for the second, third, fourth and fifth rows; such as, Bleu-Lapis 345, 344, 343, 333, 342, [A] or Rouge-Cardinal 348, 305, 304, 347, 346, [A] or Rouge-Géranium, Brun-Caroubier or any other colour that is absolutely fast.
NET PATTERN (fig. 119).—After one row of cross-stitch, such as was described in fig. 116, add a second, carrying the thread under the bar that lies between the first stitches, so that the two rows only cover three threads of the net. The close bands of cross-stitch must be divided from each other by one row of net bars.
[Illustration: FIG. 119. NET PATTERN.]
NET PATTERN (fig. 120).—Draw the thread twice backwards and forwards, as in darning, through one row of meshes. In the next, make four stitches over one mesh and two bars. After the fourth stitch, the thread is carried forward under two bars to the next group. The meshes filled in thus are divided from each other by two double rows of darning stitches. Here you may introduce a variety in the colour, using either white and unbleached, or unbleached and pale blue, or some other combination of the kind.
[Illustration: FIG. 120. NET PATTERN.]
NET PATTERN (fig. 121).—Make three diagonal stitches over three bars and two meshes, then returning to the mesh out of which the first stitches come, make three more in the opposite direction. In the second row, the stitches meet in the same mesh as those of the first.
[Illustration: FIG. 121. NET PATTERN.]
NET PATTERN (fig. 122).—Carry the thread upwards from below, over a bar of the net, then pass it horizontally under another bar and carrying it downwards, pass it under a diagonal bar and cover the other three. In the second row, your loops must be turned the opposite way. When the whole foundation is finished, run a thread over the whole surface and overcast it. A good effect is produced by using white and unbleached cottons, in alternate rows.
[Illustration: FIG. 122. NET PATTERN.]
NET PATTERN (fig. 123).—This pattern consists of one row of overcasting, one of stitches like those described in fig. 114, and one of cross-stitch, as in fig. 39, running diagonally across the stuff.
Besides the cottons already mentioned, washing gold thread (Or fin D.M.C pour la broderie), may be used for the overcasting. Dead gold introduced into simple needlework of this kind enlivens it extremely.
[Illustration: FIG. 123. NET PATTERN.]
NET PATTERN (fig. 124).—Three kinds of stitches are required for this pattern. In the first row the stitch lies crossed underneath the net; in the second, 3 stitches are made over one mesh, the first and the last of which are carried across three meshes. In the third row, button-hole stitches are carried from right to left over two diagonal bars, in such a manner that the thread is drawn through the mesh facing the loops, and the next stitch comes out under the loop of the preceding one.
[Illustration: FIG. 124. NET PATTERN.]
NET PATTERN (fig. 125).—Fill in every other diagonal row of meshes with chain stitch, inserting the needle into the same mesh it came out of, so that the thread lies in front of the needle, in a loop. The rows of chain stitch may be made with two or three rows of meshes between them. Even the diagonal lines by themselves, make a very pretty foundation for other stitches.
[Illustration: FIG. 125. NET PATTERN.]
NET PATTERN (fig. 126).—The first row worked from left to right, consists of three loop stitches upwards and three downwards, each over one bar. In the second row, divided from the first by one row of stitches, the inner loops must be turned towards each other; in the third, the outer ones. Any of the stitches, already described, can be introduced into this pattern to enliven it.
[Illustration: FIG. 126. NET PATTERN.]
NET INSERTIONS (figs. 127 and 128).—These two, as well as the subsequent patterns, are most of them worked in darning stitch and simple overcasting.
The scallops in fig. 127 are formed of darning stitches, over 4, 3, 2 and 1 mesh, respectively. In the intervening space, which is five meshes wide, the stitch shown in fig. 118, may be introduced.
[Illustration: FIG. 127. NET INSERTION.]
In repeating the pattern, the stitches forming the scallops, must be made to run in the opposite direction. Instead of the thread, simply drawn through the middle, little stars like those described in fig. 134, have a very pretty effect.
In fig. 128, the thread is first carried round one mesh and then on to the next scallop. In the second scallop, which turns the opposite way, the thread is carried once more round the last mesh after the pyramid is completed, and then on, to the next figure.
[Illustration: FIG. 128. NET INSERTION.]
NET PATTERN (fig. 129).—This checked pattern is also worked in darning stitch. Carry the thread, as in fig. 125, through every second row of meshes. When the bottom rows are all finished, the upper ones are worked across them in the same way. Here the stitches may, if preferred, be distributed more sparingly. But if they are set wider apart, the spaces between should be filled up in some way. Little dots, made of Coton à repriser D.M.C, will answer the purpose best.
[Illustration: FIG. 129. NET PATTERN.]
NET INSERTIONS (figs. 130, 131, 132).—These three patterns are specially suitable, for insertions, neck-tie lappets and the like, in the place of crochet, pillow, and other kinds of lace. Both design and stitch are clearly enough represented in the subjoined figure for further explanation to be unnecessary. All three should be worked with rather coarse cotton, and Soutache D.M.C[A] (braid) drawn in, produces an excellent effect.
[Illustration: FIG. 130. NET INSERTION.]
[Illustration: FIG. 131. NET INSERTION.]
[Illustration: FIG. 132. NET INSERTION.]
NET PATTERN (fig. 133).—These delicate little figures can be worked into a close pattern, or can be strewn singly over the surface. The closer you set the stitches, the more clear and distinct the stars will be. The thread must be drawn in to the centre mesh from without, so as to be invisible if possible, and then back again to the outside when the stitches are finished.
[Illustration: FIG. 133. NET PATTERN.]
NET PATTERN (fig. 134).—These flowerets have a very pretty effect, set either singly, or in double or triple rows, and are very useful for filling up gaps or supplementing rows.
[Illustration: FIG. 134. NET PATTERN.]
NET PATTERN (fig. 135).—These star-shaped figures, their longest stitch covering three straight bars and two meshes, the shortest, three diagonal bars and two meshes, may like the above flowerets, be ranged closely together in rows, so that four stitches, two horizontal and two vertical ones, meet in one mesh. Cotton of two colours should be used, in order that the figures may be distinct from each other: white and unbleached are the best, in cases where bright colours would be unsuitable.
[Illustration: FIG. 135. NET PATTERN.]
NET INSERTION (fig. 136).—These diamonds make a very pretty grounding either set separately, or in a continuous pattern. The design is slight, nevertheless, when it is worked in coarse cotton, the effect is exceedingly handsome, especially if the inside, in addition to the star here given, be enriched with ordinary darning-stitches, worked in fine gold thread, as we have already mentioned.
[Illustration: FIG. 136. NET INSERTION.]
NET TRACERY WITH BORDER (fig. 137).—In order to bring out the pattern and the colours, use instead of cotton, Soutache D.M.C, or Lacets surfins D.M.C. Both are to be had in all the colours, given in the list of colours of the D.M.C threads and cottons. The little border can be used in conjunction with any of the preceding patterns, but care must be taken not to let it get twisted in the working. To prevent this, slip a coarse needle under the last stitch, and draw the braid flat over it.
[Illustration: FIG. 137. NET TRACERY WITH BRAIDS. MATERIALS: Soutache D.M.C No. 2 in Bleu-Indigo 334 and Rouge-Turc 321.]
BROAD NET LACE TRACERY (fig. 138).—The pattern of this pretty lace must first be transferred to stout paper, or oil-cloth. All the leaves and stalks, and the button-holing round the open centres of the flowers, are worked in a pale green, the two bottom flowers in Turkey red, the star-shaped one in blue, the calyx in which the stalks unite, in dark red, and the little bells, in the lightest green.
[Illustration: FIG. 138. BROAD NET LACE TRACERY. MATERIALS: Coton à broder D.M.C No. 30, 35 or 40.—COLOURS: Rouge-Turc 321, Rouge-Cardinal 346, Bleu-Indigo 322, Gris-Tilleul 393 and Vert-Pistache 369.]
NET DARNING.—We conclude with some directions for darning net, a valuable art, by means of which many a curious piece of old needlework is preserved. Coarse and fine net are all darned in the same way.
Laying the first thread (fig. 139).—Tack the net which is to be darned, closely to the defective part, upon either oil-cloth or coloured paper and cut the edges straight to the thread; Your thread must be of exactly the same size, as that of which the net is made. It takes three rows of stitches to imitate the net ground; in the first place, as shown in fig. 139, cross-threads must be laid from side to side, carried as in darning, a little beyond the edges of the hole and so as to surround each mesh with a slanting stitch.
[Illustration: FIG. 139. NET DARNING. LAYING THE FIRST THREAD.]
LAYING THE SECOND THREAD (fig. 140).—Secondly, beginning from one corner, threads are laid diagonally across the first layer. The cross-threads of the foundation are encircled by a stitch, made from right to left, the needle is then carried under the next horizontal bar, and the first layer of threads is overcast with similar stitches.
[Illustration: FIG. 140. NET DARNING. LAYING THE SECOND THREAD.]
LAYING THE THIRD THREAD (fig. 141).—Thirdly, threads are carried across the second and first layers. They must start, far enough from the edge, for the second layer of threads to be overcast at the same time, so that there may be no loose threads left on the wrong side. In this third journey, every diagonal thread of the foundation is to be encircled with a stitch, taken upwards from below, the cut edges being strengthened in the same way. Then, to form the little cross in the fabric, the thread must be conducted by means of a second stitch, under the single horizontal thread, outwards, to the next-diagonal thread.
[Illustration: FIG. 141. NET DARNING. LAYING THE THIRD THREAD.]
In places where the net is worn, it can be strengthened in the same manner, the stitches being made the way of the stuff.
DAMASK STITCHES.—As a rule the pattern is simply outlined with stem and cord stitch, and the inside spaces are left plain. In spite of the time this simple tracing takes to do, the effect is rather poor and scanty. If however, the inside of the leaves and flowers, be filled in with damask stitch, the result is very handsome.
Not only can the following stitches, which are suitable for any linen coarse or fine, be used for this kind of embroidery, but most of the net and lace patterns too, and these combined with button-holing and flat stitch produce charming effects.
MATERIALS SUITABLE FOR DAMASK STITCHES.—All the threads and cottons used for net work can also be used for damask stitches, according to the material and the kind of work. We will enumerate them once more:
Coton à tricoter D.M.C Nos. 8 to 20, Coton à repriser D.M.C Nos. 25 to 70, Coton à broder D.M.C Nos. 16 to 50, Fil à dentelle D.M.C Nos. 25 to 50, Coton à broder surfin D.M.C Nos. 100, 120, 150.[A]
This kind of embroidery is generally done with a very coarse needle, to press the threads of the stuff closely together and make the light spaces between, which appear in many of the following illustrations.
FIRST PATTERN (fig. 142).—Carry the needle in a slanting direction over three threads and bring it out, from right to left, under three perpendicular ones, then again slanting, over three threads, from left to right, and out again underneath three horizontal ones, downwards from above. Thus the first stitch lies across, from right to left, the second, lengthways. On the wrong side, the stitch forms a regular succession of steps.
[Illustration: FIG. 142. FIRST PATTERN]
SECOND PATTERN (fig. 143).—This is worked exactly in the same manner as fig. 142, only that the second row of stitches touches the first, so that two threads enter and issue from the same hole.
[Illustration: FIG. 143. SECOND PATTERN]
THIRD PATTERN (fig. 144).—Though at first sight, this stitch is very like the Holbein or stroke stitch, it is very different in the execution. It is worked in two rows, to and fro; in the first, you make all the vertical stitches side by side in the width of the stuff, drawing your thread very tightly, in the second, coming back, you make the horizontal stitches in a straight line, at right angles to the first stitches. On the wrong side the stitches are crossed; they in thin stuffs, show through, and quite alter the appearance of the right side.
[Illustration: FIG. 144. THIRD PATTERN.]
FOURTH, PATTERN (fig. 145).—In the first row, the thread is carried slanting upwards from right to left, over two threads, then downwards under two. Coming back, the stitches must be set the opposite way, so that four threads meet in one hole.
[Illustration: FIG. 145. FOURTH PATTERN.]
FIFTH PATTERN (fig. 146).—This is worked like fig. 145, only that the stitches must cover three threads each way. In the second row, you take up one thread on the right and two on the left, to form your stitches.
[Illustration: FIG. 146. FIFTH PATTERN.]
SIXTH PATTERN (fig. 147).—Here, the stitches form a chess-board pattern. You begin with a diagonal stitch over two threads and bring your needle up again into the same line it started from. The second stitch covers three threads, the third six, the fourth eight; the next three decrease, successively in length, in the same proportion.
[Illustration: FIG. 147. SIXTH PATTERN.]
SEVENTH PATTERN (fig. 148).—Two kinds of cotton have to be used for this pattern, one of them soft and flat, like Colon à repriser D.M.C[A] (darning cotton) or Coton à tricoter D.M.C (knitting cotton)[A] for the flat stitches, and the other strongly twisted, like Cordonnet 6 fils D.M.C No. 8, 10, 12 or 15,[A] for the cross stitches.
[Illustration: FIG. 148. SEVENTH PATTERN.]
The five flat stitches cover three threads in width and six in height, and lie from right to left and from left to right. In the second row, which must be two threads distant from the first, the stitches must lie in the contrary direction. In the lozenge-shaped space between, make four cross stitches, over four threads in height and two in width.
EIGHTH PATTERN (figs. 149 and 150).—Make five stitches over 8 horizontal threads, miss 6 threads and make another 5 stitches. The groups of long stitches above and beneath the first row, encroach over two threads of the first group, so that a space of only four threads remains between two groups. The stitch between these groups is generally known as the rococo stitch.
[Illustration: FIG. 149. EIGHTH PATTERN.]
Bring out your needle between the third and fourth of these threads, and insert it again above, drawing it out afterwards between the second and third horizontal thread, and securing the first stitch with a back stitch. Make the three remaining stitches, as explained in fig. 150.
[Illustration: FIG. 150. EXPLANATION OF THE ROCOCO STITCH IN FIG. 149.]
NINTH PATTERN (fig. 151).—This consists of straight bands of flat stitches, covering three threads each way, with spaces 8 threads wide between, ornamented with a small pattern in stroke stitch, (see chapter on Tapestry and Linen embroidery).
[Illustration: FIG. 151. NINTH PATTERN.]
DAMASK STITCH FOR FIGS. 103 AND 105 (fig. 152).—The stitches, here represented on a large scale, form the border to the square in cut open-work in fig. 105. The long diagonal stitches, on either side, can be made to look fuller and more distinct, by using a soft, coarse cotton.
[Illustration: FIG. 152. DAMASK STITCH FOR FIGS. 103 AND 105.]
TENTH AND ELEVENTH PATTERNS (figs. 153 and 154).—The former of these is used for filling in the short stripe in fig. 105, the second for the long inside one. Fig. 153 is clear enough to need no explanation; with reference to fig. 154, it is however as well to point out that the shortest stitch should cover 4 threads and the longest 12, the rest is easily learnt from the illustration. This is a very suitable design for the decoration of large surfaces and combines well with any running diagonal pattern, when it can be made to form a large star which can be worked as a separate figure.
[Illustration: FIG. 153. TENTH PATTERN. DAMASK STITCH FOR FIGS. 104 AND 105.]
[Illustration: FIG. 154. ELEVENTH PATTERN. DAMASK STITCH FOR FIG. 105.]
TWELFTH PATTERN (fig. 155).—In cases where this and the following stitches are to be executed on a light, transparent stuff, it is best to use a very strongly twisted thread, such as Fil d’Alsace D.M.C [A] or, Fil à dentelle D.M.C [A] instead of a softer and looser material. A stiff thread compresses the threads of the stuff better and the open spaces, thus made in it, are rendered more visible.
[Illustration: FIG. 155. TWELFTH PATTERN.]
Count 6 threads vertically, put in the needle and draw it through from right to left, underneath 3 diagonal threads. For the next stitch, carry it upwards over 6 threads, and back under 3. The second row is worked back over the first in the same way. Leave 6 threads between each row.
THIRTEENTH PATTERN (fig. 156).—Carry the thread, from right to left over four vertical threads, and under the same number of horizontal ones. The second row of stitches touches the first, so that the thread it is worked with seems to be drawn through under the same threads of the stuff, as the one the first row was worked with.
[Illustration: FIG. 156. THIRTEENTH PATTERN.]
FOURTEENTH PATTERN (fig. 157).—Here, the stitches, contrary to those in fig. 147, are set vertically. The first stitch covers 2 threads, the second 6, the third 10, the fourth 14, the fifth 18. The longest stitches of two checks always meet in the same hole.
[Illustration: FIG. 157. FOURTEENTH PATTERN.]
FIFTEENTH PATTERN (fig. 158).—Cover the whole expanse with rows of stitches, such as are described in fig. 155, with intervals of 12 threads between them.
[Illustration: FIG. 158. FIFTEENTH PATTERN.]
These rows are intersected by others, to which the thread is passed, from between the sixth and seventh of the 12 threads between the first rows. Where the stitches of the two rows meet, the working thread of the second row must be drawn through, under that of the first.
SIXTEENTH PATTERN (fig. 159).—Between every two rows of cross-stitch, leave an interval of 6 threads, counting those on each side of the rows.
Over these 6 threads work 2 rows, as shown in fig. 148, but so, that in the second, the lower stitch of the first row and the upper one of the second, cover the same threads.
[Illustration: FIG. 159. SIXTEENTH PATTERN.]
SEVENTEENTH PATTERN (fig. 160).—This consists of stripes, 4 stitches wide, like those of fig. 155, with 3 threads between, which are overcast in the ordinary manner.
[Illustration: FIG. 160. SEVENTEENTH PATTERN.]
EIGHTEENTH PATTERN (fig. 161).—Small squares of 7 stitches, inclined alternately, to the right and left, and so formed, that the longest stitch of one square is crossed by the first short stitch of the next, so that a space only 6 threads wide and 4 long, remains uncovered. The intervening stripes are filled with 3 rows of overcasting stitches, covering 2 threads each way.
[Illustration: FIG. 161. EIGHTEENTH PATTERN.]
NINETEENTH PATTERN (fig. 162).—The steps formed by this pattern are 11 stitches high, and 11 wide, and each stitch covers 4 threads.
[Illustration: FIG. 162. NINETEENTH PATTERN.]
Eight threads intervene between each row of steps, which are covered at the bend, by a square of stitches, from the last of which, the thread is carried on at once, to the four single stitches.
TWENTIETH PATTERN (fig. 163).—The 4 squares set opposite to each other, with 2 threads between, are edged all round by 3 rows of overcasting.
[Illustration: FIG. 163. TWENTIETH PATTERN.]
TWENTY-FIRST PATTERN (fig. 164).—Begin by rows of stitches, like those described in fig. 155, over 4 and 2 threads, with 4 threads between, not counting those covered with cross-stitch. Between the two rows of cross-stitch, join 6 threads together by a back-stitch, and carry your thread over the two last of the 6, to the 2 first of the next cluster. The narrow diagonal stripes are separated by 24 threads, exclusive of those covered by the cross-stitches. These spaces are filled in with squares, 10 threads wide and 10 long, formed by back-stitches crossed on the wrong side.
[Illustration: FIG. 164. TWENTY-FIRST PATTERN.]
TWENTY-SECOND PATTERN (fig. 165).—In the closer stuffs, of a coarse texture, the threads of which do not admit of being drawn together, as you can those, of a loose thin stuff, where, by simply pulling your thread a little tighter you get open spaces, you must begin by cutting out every fourth or fifth thread. After which, you overcast all the rows, first one way, and then the other, with stitches covering 4 threads, each way. On this foundation with strong, loosely-twisted cotton, Coton à broder D.M.C or Coton à tricoter D.M.C No. 25, 30, 35, or 40, make long stitches, as indicated in the illustration.
[Illustration: FIG. 165. TWENTY-SECOND PATTERN.]
TWENTY-THIRD PATTERN (fig. 166.)—From the point where the thread comes out of the stuff, make 16 stitches, four times over, all coming out of the same hole, over 8, 6, 4 and 6 threads, thus forming a star.
Leave an interval of four threads between the stars, and unite the intervening threads by cross-stitches one way, and whip-stitches, the other.
[Illustration: FIG. 166. TWENTY-THIRD PATTERN.]
TWENTY-FOURTH PATTERN (fig. 167).—Make a succession of diagonal stitches, increasing in length, and advancing one thread at a time, until the seventh stitch covers seven threads, and completes the triangle. Then begin a second triangle on the nearest, adjacent thread.
[Illustration: FIG. 167. TWENTY-FOURTH PATTERN.]
TWENTY-FIFTH PATTERN (fig. 168).—Cover your whole surface with squares of 16 stitches, as in fig. 147, and fill in the intervening squares with 23 stitches, all radiating from one centre.
[Illustration: FIG. 168. TWENTY-FIFTH PATTERN.]
TWENTY-SIXTH PATTERN (fig. 169).—Diagonal trellised stripes, made as indicated in fig. 165, and overcast, form the ground. Twelve threads are to be left between the stripes, upon which, work six-cornered, lozenge-shaped groups of stitches, set at right angles to each other, in diagonal rows.
[Illustration: FIG. 169. TWENTY-SIXTH PATTERN.]
TWENTY-SEVENTH PATTERN (fig. 170).—We conclude our chapter with a circular design, which combines a variety of stitches, and introduces our workers to two new patterns, as well as to an advantageous way of hiding the junction of several kinds of stitches by semicircles of button-hole stitching.
[Illustration: FIG. 170. TWENTY-SEVENTH PATTERN.]
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: STRIPE IN FLAT AND RAISED SATIN STITCH, AND MADEIRA EMBROIDERY.]
White Embroidery.
We have retained the familiar term, white embroidery, for this kind of needlework, for convenience sake, in spite of its inaccuracy, now that coloured materials are quite as much used for it as white.
It is executed, either on a backing of oil-cloth, or in an embroidery frame, called «tambour-frame». Only skilful workers can dispense with these, for an untrained hand can hardly avoid puckering. If you work without a foundation, the material must be held, quite smoothly over the forefinger, so that the threads lie perfectly straight, otherwise, the pattern is very apt to get pulled out of shape in the working. With your three other fingers you hold the material fast, the thumb resting on the work itself, beyond the outline of the pattern, which must be turned towards the worker.
It is always the outside line of a pattern that is drawn in double lines, that should be turned towards the palm of the hand.
TRACING PATTERNS.—Patterns are generally to be had ready traced, but as it is often necessary to repeat, enlarge, or reduce them, descriptions of several modes of doing so, will be found at the end of the concluding chapter.
MATERIALS.—A loose, soft make of cotton, the looser the better, and very little twisted, is the best material for embroidery. We recommend for white embroidery in general, Coton à broder D.M.C Nos. 16 to 150; for monograms on cambric, Coton à broder surfin D.M.C Nos. 100, 120, 150;[A] and for English or Madeira embroidery, Coton Madeira D.M.C Nos. 40, 50, 60;[A] for padding, or raising the embroidery, all the different kinds of Coton à repriser D.M.C[A] can be used.
OUTLINING AND PADDING.—The outlining of a pattern is a very important preliminary. A want of precision in the ultimate effect is often due, merely to careless outlining. This part of the work should be done with rather a coarser cotton than the embroidery itself. Fasten in the thread by a few running stitches, never with a knot, a rule to be observed also in embroidering, except in very rare cases. Finish off your thread by drawing it through the tracing stitches, or through some part of the pattern that is already finished.
Fill in the spaces between the lines with a padding of run threads, run loosely, and so that they lie thickly and solidly in the centre, and shade off on both sides. The fullness, and roundness of embroidery, depends on the firmness of this sub-stratum of threads. The outlining and the padding of the different rounded and pointed scallops, as well as of other figures that occur in white embroidery, are illustrated in figs. 181, 182, 183, 184, 185, 187, 189, 190 and 191.
BLANKET, OR BUTTON-HOLE STITCH (fig. 171).—Work from left to right; run in a foundation line, hold down the working thread below the run line with the right thumb; insert the needle above and bring it out below the run line but above the working thread; tighten the loop thus formed, without drawing up the stuff, and continue in this manner, setting your stitches closely and regularly, side by side.
[Illustration: FIG. 171. BLANKET, OR BUTTON-HOLE STITCH.]
STRAIGHT STEM STITCH (fig. 172).—Work from left to right. The needle must always be inserted above the run thread, and brought out underneath it. In the case of a very delicate pattern, take up only just as much stuff as the run thread covers.
[Illustration: FIG. 172. STRAIGHT STEM STITCH.]
SLOPING STEM STITCH (fig. 173).—Work without a run thread; insert the needle from right to left in a slanting direction, under 1 or 2 horizontal threads, and 5 or 6 perpendicular ones; so that each stitch reaches halfway back to the last.
[Illustration: FIG. 173. SLOPING STEM STITCH.]
This kind of stem stitch is chiefly used for the fine upstrokes of letters and numbers, and for linen embroidery.
BACK-STITCHING (fig. 174).—Back-stitching, that is small, even stitches set closely together, is done from right to left, along a straight line, and is chiefly used for filling in the centres of letters, leaves and flowers.
[Illustration: FIG. 174. BACK-STITCHING.]
CROSSED BACK-STITCH (figs. 175 and 176).—Used, generally speaking, only for very transparent materials; it forms a close seam of cross-stitch, on the wrong side, and two straight rows of back-stitching on the right. To work, insert the needle as if for an ordinary back-stitch, pass it under the stuff, sloping it a little towards the second outline of the pattern, and draw it out almost in front of the first stitch. After making a back-stitch, pass the needle up again under the stuff and bring it out at the spot where the next stitch is to be.
[Illustration: FIG. 175. CROSSED BACK-STITCH. RIGHT SIDE.]
[Illustration: FIG. 176. CROSSED BACK-STITCH. WRONG SIDE.]
Fig. 176 shows the interlacing of the stitches on the wrong side, and the way in which this stitch, when it is used for filling in centres, can be worked on the right side.
SIMPLE KNOT STITCH (fig. 177). This consists of two back-stitches, side by side, covering the same threads; it is chiefly used for filling in leaves, embroidered on very thin materials, or in conjunction with flat stitch.
[Illustration: FIG. 177. SIMPLE KNOT STITCH.]
TWISTED KNOT STITCH (fig. 178). To work hold the working thread down with the thumb close to the spot where you first brought it out, twist it twice round the needle, turn the needle round from left to right, following the direction indicated by the arrow, pass it through the fabric at the place which is marked by a dot, and draw it out at the place where the next stitch is to be.
[Illustration: FIG. 178. TWISTED KNOT STITCH.]
POST STITCH (fig. 179).—Something like knot stitch and much used for patterns, composed of small flowers and leaves, where it often takes the place of raised satin stitch. The illustration represents five leaves finished, and the sixth in process of being worked.
[Illustration: FIG. 179. POST STITCH.]
To work, bring the needle up from the back and twist the thread round it as many times as the length of the stitch requires, hold the left thumb on the species of curl thus formed, and passing the needle and thread through it, insert it at the end of the leaf where it first came out, and draw it out at the right place for the next stitch.
BUTTON-HOLE BARS (fig. 180).—When a pattern is ornamented with open-work bars, begin by tracing the outside parallel lines. Then button-hole the whole lower line and the upper one, till you come to the place where the first bar is to be; then you carry your thread across and bring up the needle from below through one of the loops, as, shown in the figure; lay three threads in this manner, inserting your needle the third time one loop further on. Then cover the three threads thickly with button-holing.
[Illustration: FIG. 180. BUTTON-HOLE BARS.]
DIFFERENT KINDS OF SCALLOPS (figs. 181, 182, 183).—The outlining, padding and button-holing of these scallops is executed in the manner already described. Be careful to adapt the length of the stitches to the shape and size of the scallops. If they are pointed (figs. 182, 183), the stitches will have to be set very closely together on the inner line, and a little play allowed them on the outer, to come exactly to the point, which should be very sharply defined.
[Illustration: FIG. 181. ROUND, BUTTON-HOLED SCALLOPS.]
[Illustration: FIG. 182. LARGE, POINTED, BUTTON-HOLED SCALLOPS.]
[Illustration: FIG. 183. SMALL, POINTED, BUTTON-HOLED SCALLOPS.]
ROSE SCALLOPS (figs. 184 and 185).—These are, large button-holed scallops with indented edges, in the one case, rounded at the top and sharply pointed at the join; in the other, pointed at the top, and joined at the bottom by a straight bar of button-holing.
[Illustration: FIG. 184. ROUNDED ROSE SCALLOPS.]
[Illustration: FIG. 185. POINTED ROSE SCALLOPS.]
EYELET HOLES (figs. 186, 187, 188).—Outline the eyelet holes very carefully first by running a thread round them, then cut out the enclosed stuff with a sharp pair of finely pointed scissors, and edge the hole with plain overcasting stitches, worked from left to right.
[Illustration: FIG. 186. OVERCAST EYELET HOLES.]
When you have a long row of eyelet holes to make, outline the upper and lower halves alternately, first on one side and then on the other, using two threads, and then overcast them in the same way. The double crossing of the working threads between the eyelet holes makes them much stronger, than if each hole were finished off separately, and the thread passed underneath from one to the other.
[Illustration: FIG. 187. BUTTON-HOLED SHADED EYELET HOLES.]
[Illustration: FIG. 188. SHADED EYELET HOLES HALF OVERCAST, HALF BUTTON-HOLED.]
The lower halves of shaded eyelet holes, (see figs. 187 and 188), are worked with very short stitches, and the upper halves with long ones; they may be edged entirely, either with button-holing or overcasting, or half with one and half with the other.
SIX LEAVES IN RAISED SATIN STITCH (fig. 189).—Raised satin stitch is chiefly used for working flowers, leaves, petals, dots, initials and monograms. After tracing the outline of the design, fill in the centres with a padding of long, close stitches for which you can again take Coton à repriser D.M.C[A] and then, beginning always at the point of the leaf, see letter A, cover it with flat, perfectly even stitches, worked from right-to-left.
B illustrates a leaf, divided through the middle by a line of overcasting; C, one with a corded vein; D, a divided leaf worked in sloping satin stitch; E, a leaf, with a corded vein and framed in sloping satin stitch; F, a leaf worked half in satin stitch, half in back-stitch and straight stem stitch.
[Illustration: FIG. 189. SIX LEAVES IN RAISED SATIN STITCH.]
Leaves and flowers of all descriptions, can be executed in any of these stitches, and in different combinations of the same.
SIX WAYS OF MAKING DOTS (fig. 190).—Dots, when they are well made, are exceedingly effective in white embroidery, particularly if they are worked in a variety of stitches. Dot A is worked in raised satin stitch;
B, in raised satin stitch, framed in back stitch; C, in raised satin stitch, framed in twisted knot stitch; D is composed of several post stitches of different lengths, set in a frame of stem stitches; E is worked in back-stitch, and F consists of a small eyelet hole, with a corded setting, which forms the centre.
[Illustration: FIG. 190. SIX WAYS OF MAKING DOTS.]
VENETIAN EMBROIDERY (fig. 191).—Scallops, worked in very high relief, called Venetian embroidery, are an imitation on stuff of Venetian lace.
Real Venetian point is entirely needle-made; in the embroidered imitations of it, the stuff takes the place of the needle-made lace foundation. To make it more like the original however, the ground is seldom left plain, but is covered with fancy stitches, such as are represented in the illustration, or with one or other of the damask stitches in figs. 146 to 170. The button-hole bars may be made with or without picots. A full description of the latter will be found in the chapters on net embroidery, and Irish lace.
The space to be button-holed, must be well padded, for thereon depends the roundness of the embroidery. For this purpose take 6 or 8 threads of Coton à repriser D.M.C No. 25,[A] and fasten them down on to the pattern with loose stitches, laying on extra threads, and cutting them gradually away, according to the width the line is to be. The stuff underneath the bars should only be cut away when the embroidery is quite finished.
[Illustration: FIG. 191. VENETIAN EMBROIDERY.]
RENAISSANCE EMBROIDERY (figs. 192 and 193).—This is the term applied, more especially in France, to embroidery patterns, which are worked entirely in button-holing, and connected by button-hole bars without picots, as shewn in the two accompanying figures. The outside edge in fig. 193, is embellished with picots, described in the chapters just referred to.
[Illustration: FIG. 192. RENAISSANCE EMBROIDERY.]
[Illustration: FIG. 193. RENAISSANCE EMBROIDERY.]
RICHELIEU EMBROIDERY (fig. 194).—The name given to embroidery of a similar kind to the former, but in which the connecting bars, instead of being left plain as they are in the Renaissance embroidery, are ornamented with picots.
[Illustration: FIG. 194. RICHELIEU EMBROIDERY.]
MADEIRA WORK (figs. 195, 196, 197).—This kind of embroidery, which consists chiefly of eyelet holes, and is distinguished for the excellence of its workmanship used to be known as English, but is now generally called Madeira work, from the island where it originated. The scallops in figs. 195 and 197, are bordered with shaded eyelet holes, worked half in button-hole stitch, half in overcasting; the finely scalloped edge, in fig. 196, is entirely button-holed. In working eyelet holes, the material must always be turned in, up to the inside line, and completely worked in, underneath the in order that no loose threads may be visible on the wrong side.
[Illustration: FIG. 195. MADEIRA WORK.]
[Illustration: FIG. 196. MADEIRA WORK. MATERIALS: Coton Madeira D.M.C No. 40, 50 or 60. (Special cotton for Madeira work)[A]]
[Illustration: FIG. 197. MADEIRA-WORK. MATERIALS: Coton Madeira D.M.C No. 40, 50 or 60. (Special cotton for Madeira-work).]
SWISS EMBROIDERY FRAME (fig. 198).—Letters, monograms, coronets and the like, require extreme care in the working, and can only be really well done in a frame. The round Swiss frame, or tambour frame, is the one most commonly used. It consists of two wooden hoops, fitting loosely into each other; the inner one, fastened to a support with a wooden screw let into the lower part of it, with which to fasten the frame to the table. The outside hoop is loose.
Place the fabric to be embroidered over the smaller hoop, the pattern in the middle, and press the other down over it so that it is tightly stretched and fixed between the two hoops.
A leathern strap with holes and a buckle, sometimes takes the place of the second hoop.
[Illustration: FIG. 198. SWISS EMBROIDERY FRAME.]
ORDINARY EMBROIDERY FRAME (fig. 199).—Tambour frames can only be used for embroidering pocket-handkerchiefs and other small articles; all larger work has to be done in an ordinary frame. Sew a piece of strong stuff into the frame, stretch it as tightly and evenly as possible, and cut out a square in the middle to the size of the pattern. Then tack your work in underneath, straight to the thread, dividing it out carefully with pins first, to ensure its being set in perfectly evenly.
Roll or fold up the rest of the stuff over the edges of the frame, and secure it with a few stitches or pins, to keep it out of the way of your hand as you work.
[Illustration: FIG. 199. ORDINARY EMBROIDERY FRAME.]
ALPHABETS FOR MONOGRAMS (figs. 200 to 205).—On account of the difficulty of devising a good monogram for marking under-linen, we subjoin two alphabets, by the aid of which our workers will be able to compose their own.
The letters are of a good medium size, which can be magnified or reduced according to the worker’s own taste.
For any such modifications, we would again draw our reader’s attention to the directions given in the concluding chapter. The three first plates represent large wide letters, intended to contain or encompass the more elongated ones, represented in the fourth and fifth plates, figs. 203 and 204.
The interlacing of the letters requires to be carefully done, and our workers should study the following specimens, so as to learn the stitches also, which are most suitable for this branch of embroidery.
[Illustration: FIG. 200. ALPHABETS FOR MONOGRAMS. Outside letters A to H.]
[Illustration: FIG. 201. ALPHABETS FOR MONOGRAMS. Outside letters J to Q.]
[Illustration: FIG. 202. ALPHABETS FOR MONOGRAMS. Outside letters R to Y.]
[Illustration: FIG. 203. ALPHABETS FOR MONOGRAMS. Inside letters A to L.]
[Illustration: FIG. 204. ALPHABETS FOR MONOGRAMS. Inside letters M to X.]
[Illustration: FIG. 205. ALPHABETS FOR MONOGRAMS. Last inside and outside letters.]
MONOGRAM COMPOSED OF LETTERS A AND D (fig. 206).—Here, letter A is worked in flat satin stitch, in Bleu-Indigo 312, and set in stem stitch, worked in Rouge-Turc 321. D as a contrast to A, is embroidered in transverse bars, the left part in pale blue and white, the right in pale blue and dark blue. The little ornaments may be worked according to fancy, either in white, or in one of the given colours.
[Illustration: FIG. 206. MONOGRAM COMPOSED OF LETTERS A AND D DRAWN FROM THE ALPHABETS OF MONOGRAMS. MATERIALS: Coton à broder D.M.C Nos. 100 to
- COLOURS: Bleu-Indigo 334, Rouge-Turc 321 and white.[A]]
MONOGRAM COMPOSED OF LETTERS V AND S (fig. 207).—The flat satin stitch in both letters is worked in white; the setting, is in red, in short stem stitch, or if preferred, in knotted back stitch.
[Illustration: FIG. 207. MONOGRAM COMPOSED OF LETTERS V AND S DRAWN FROM THE ALPHABETS OF MONOGRAMS. MATERIALS: Coton à broder D.M.C No. 120.
COLOURS: White and Rouge-Cardinal 305.[A]]
MONOGRAM COMPOSED OF LETTERS R AND C (fig. 208).—These are worked in black and grey, for mourning; the way C is divided, admits of a variety in the stitch; for instance, the back-stitches, in the illustration, may be replaced by very small eyelet holes.
[Illustration: FIG. 208. MONOGRAM COMPOSED OF LETTERS R AND C DRAWN FROM THE ALPHABETS OF MONOGRAMS. MATERIALS: Fil à dentelle D.M.C No. 150.
COLOURS: Gris-Cendre 318 and Noir grand Teint 310.]
MONOGRAM COMPOSED OF LETTERS G AND E (fig. 209).—The flat satin stitching and back-stitching in E, and the stem-stitched edges of G are worked in white Coton à broder D.M.C; the inside of G in ivory white Coton surfin D.M.C.
[Illustration: FIG. 209. MONOGRAM COMPOSED OF LETTERS G AND E DRAWN FROM THE ALPHABETS OF MONOGRAMS. MATERIALS: Coton à broder D.M.C No. 120 white and Coton surfin D.M.C No. 120, unbleached.]
BORDER IN GOBELIN STITCH (fig. 210).—Gobelin embroidery is merely raised satin stitch, worked directly upon the pattern, without any foundation, or padding. The effectiveness of this kind of embroidery, which appears so complicated and is really so easy, and the many ways in which it can be utilised, soon brought it into favour. It can be worked on the article itself, or on stripes, laid on afterwards, with a hem-stitch bordering. The original of fig. 210 was in blue and red;
Bleu Indigo 312 for the grounding, Rouge-Turc 321, for the setting in stem-stitch. The herring-boning along the edges of the pattern, top and bottom, is also in red.
[Illustration: FIG. 210. BORDER IN GOBELIN STITCH. MATERIALS: Coton à broder D.M.C No. 35 in two different colours such as: Bleu-Indigo 312 and Rouge-Cardinal 304, Rouge-Grenat 358 and 309 or, Gris-Tilleul 393 and Rouge-Cardinal 305.[A]]
Should a different selection of colours be made, it is important to remember that in all cases a sharp contrast is desirable.
ALPHABET AND NUMERALS, LEFT BLANK, AND OUTLINED BY THE GROUNDING,
WORKED IN GOBELIN STITCH (figs. 211 to 215).
[Illustration: FIG. 211. ALPHABET LEFT BLANK AND OUTLINED BY THE GROUNDING. Letters A to N.]
[Illustration: FIG. 212. ALPHABET LEFT BLANK AND OUTLINED BY THE GROUNDING. Letters O to Z.]
[Illustration: FIG. 213. LETTER O, FROM THE ALPHABET GIVEN IN FIGS. 211 AND 212.]
[Illustration: FIG. 214. NUMERALS LEFT BLANK AND OUTLINED BY THE GROUNDING.]
The border worked in Gobelin stitch, illustrated in fig. 210, suggested to us the idea of an alphabet and numerals, to be executed in a similar style, left blank, that is to say, and outlined by a grounding in Gobelin stitch, which are better suited to embroideries of the kind than those generally used. Our limited space prevents us from giving all the letters in the diagonal position they are intended to occupy on the article itself. O and W only, are represented in the right position. No difficulty will be found in copying the other letters, in giving them the proper direction.
[Illustration: FIG. 215. LETTER W, FROM THE ALPHABET GIVEN IN FIG. 211 AND 212.]
In order to economize room, J and H are represented in one square, but they are easily distinguishable from each other.
Fig. 214 represents the numerals, executed in the same way. We should like to draw our readers attention to a few other ways in which letters and numerals may be outlined by the background; for example, the solid parts can be worked either in plain or twisted knot stitch (figs. 177 and 178); in very fine chain stitch; in old German knot or bead stitch (fig. 873), or even in piqué embroidery (fig. 877).
BORDER OUTLINED BY GROUNDING, WORKED IN GOBELIN AND STEM STITCH (fig. 216). The grounding of this pattern is worked on stiff white linen, and entirely in Rouge-Turc 321, and the outlining in Noir grand Teint 310.
The same pattern can equally well be worked on gauzes and other transparent stuffs, but with Coton à repriser, instead of Coton à broder D.M.C, for the solid parts. Two shades of Rouge-Grenat, one dark and one very light, may be taken instead, or two of Jaune-Rouille, or of Violet-Mauve, employing always the lighter shade for the grounding and the darker for the setting.
[Illustration: FIG. 216. BORDER, OUTLINED BY THE GROUNDING WORKED IN GOBELIN AND STEM STITCH. First part.]
[Illustration: FIG. 216. Second part. MATERIALS: Coton à broder D.M.C No. 50.—COLOURS: Rouge-Turc 321 and Noir grand Teint 310.[A]]
Be careful, in the grounding, not to make the red stitches near the edge, longer than they are represented in the illustration and to set the black stem stitches as close as possible to the grounding.
The pattern, which could only be reproduced in the original size, had to be divided in two, to fit the page. In copying it, join the A and B of the first part to the A and B of the second; the same in fig. 217, each time the pattern is repeated, the flowers are to droop from the + as seen from the position of the buds in the first part, at the beginning of the drawing.
FLOWER GARLAND IN DIFFERENT KINDS OF STITCHES (figs. 217 and
218).—Most of the stitches, described at the beginning of this chapter, will be found in this graceful garland, in the execution of which a considerable variety of colours can be introduced. The rose-buds may be worked in two shades of Vert-Pistache and of Rouge-Grenat, in the stitches described in figs. 173, 177, 189 A; the forget-me-nots, in two or even three shades of Bleu-Indigo, in raised satin stitch and knotted stitch; the slender green leaves in Vert-de-gris, or Gris-Tilleul, the stamens in Jaune-Citron, and the stalks of the roses in Brun-Acajou.
[Illustration: FIG. 217. FLOWER-GARLAND IN DIFFERENT KINDS OF STITCHES.
First part.]
[Illustration: FIG. 217. Second part. MATERIALS: Coton à broder D.M.C No. 40. COLOURS: Rouge-Grenat 326 and 335, Bleu-Indigo 312 and 334, Vert-Pistache 319 and 320, Vert-de-gris 474 and 475, Brun-Acajou 301, Jaune-citron 446.]
[Illustration: FIG. 218. SHOWING THE WORKING OF THE OUTSIDE STITCHES IN FIG. 217.]
The border that completes this charming pattern, consists of four rows of button holing, worked in four colours. The first row in our illustration is worked in pale pink, followed by three shades of green, the palest of which is used for the second row of stitches.
When these rows are worked upon a satine or cambric foundation, it is advisable to begin by making a small drawing, in which the height of the stitches and the distance between them is accurately marked out, then prick the pattern through and pounce it upon the material beneath.
When they are worked on a material, the threads of which can be counted no such precaution is necessary.
INSERTION IN GOBELIN AND STEM STITCH (fig. 219).—Owing to the shortness of the stitches, this pattern is easier to work than the foregoing ones. The little flowers are embroidered alternately in dark and light red; the setting varies to correspond, the light red flower being set in dark red, and vice versa. The interior of the leaves is in light green and the setting, as well as the connecting bars, in dark green.
[Illustration: FIG. 219. INSERTION IN GOBELIN AND STEM STITCH.
MATERIALS: Coton à broder D.M.C No. 35—COLOURS: Rouge-Cardinal 347 and Rouge-Géranium 352 with Gris-Tilleul 392 and 331, or Bleu-Indigo 312 and 334 with Vert-Mousse 469 and 471, or Violet-Mauve 375 and 376 with Jaune-Rouille 364 365.[A]]
STRIPES OF EMBROIDERY WITH LACE INSERTION BETWEEN (fig. 220).—We
conclude this chapter, by showing how stripes of embroidery can be used alone, or in conjunction, either with bands of open-work, or lace, crochet, or net insertion. Such combinations are useful for ornamenting aprons, table-cloths, curtains etc., every description in short of household linen and of children’s garments. One great advantage, moreover, which stripes of this kind, have over larger pieces of embroidery is that they require neither frame nor pillow, nor wearisome counting of stitches, but can be worked in the hand, at all times and places.
[Illustration: FIG. 220. STRIPES OF EMBROIDERY WITH INSERTION BETWEEN.]
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: STRIPE OF GOLD EMBROIDERY IN GOLD THREAD, PURL, AND FLATTENED GOLD WIRE.]
Flat stitch and Gold embroidery.
The terms, flat stitch and gold embroidery, suggest as a rule, needle-work upon rich materials, such as velvet, brocade, plush and the like.
Nevertheless, a great deal of beautiful embroidery is to be met with, in silk and gold thread upon quite common stuffs; Persian and Moorish embroidery for instance, both remarkable for their delicacy and minuteness, and executed upon ordinary linen, or cotton fabrics.
As a fact, the material is quite a secondary matter; almost any will do equally well as a foundation, for the stitches described in these pages.
Flat stitch, and some of the other stitches used in gold embroidery, can be worked with any kind of thread, but best of all with the D.M.C cottons.
FLAT STITCH EMBROIDERY.—Decorative designs, and conventional flowers, are the most suitable for flat stitch embroidery; a faithful representation of natural flowers should not be attempted, unless it be so well executed, as to produce the effect of a painting and thus possess real artistic merit.
ENCROACHING FLAT STITCH (fig. 221).—Small delicate flowers, leaves, and arabesques, should in preference, be worked either in straight flat stitch (figs. 189 and 190) or in encroaching flat stitch. The stitches should all be of equal length, the length to be determined by the quality of the thread; a fine thread necessitating short, and a coarse one, long stitches. The stitches should run, one into the other, as shown in the illustration. They are worked in rows, those of the second row encroaching on those of the first, and fitting into one another.
[Illustration: FIG. 221. ENCROACHING SATIN STITCH.]
Work your flowers and leaves from the point, never from the calyx or stalk. If they are to be shaded, begin by choosing the right shade for the outside edge, varying the depth according to the light in which the object is supposed to be placed. The stitches should always follow the direction of the drawing.
ORIENTAL STITCH (figs. 222, 223, 224).—The three following stitches, which we have grouped under one heading, are known also, under the name of Renaissance or Arabic stitches. We have used the term Oriental, because they are to be met with in almost all Oriental needlework and probably derive their origin from Asia, whose inhabitants have, at all times, been renowned for the beauty of their embroideries.
[Illustration: FIG. 222. ORIENTAL STITCH.]
[Illustration: FIG. 223. ORIENTAL STITCH.]
These kind of stitches are only suitable for large, bold designs. Draw in the vertical threads first; in working with a soft, silky material, to economise thread, and prevent the embroidery from becoming too heavy, you can begin your second stitch close to where the first ended.
[Illustration: FIG. 224. ORIENTAL STITCH.]
But if the thread be one that is liable to twist, take it back underneath the stuff and begin your next stitch in a line with the first, so that all the stitches of the first layer, which form the grounding, are carried from the top to the bottom. The same directions apply to figs. 223, 224 and 226.
When you have laid your vertical threads, stretch threads horizontally across, and fasten them down with isolated stitches, set six vertical threads apart. The position of these fastening stitches on the transverse threads must alternate in each row, as indicated in fig. 222.
For fig. 223, make a similar grounding to the one above described, laying the horizontal threads a little closer together, and making the fastening stitches over two threads.
In fig. 224, the second threads are carried diagonally across the foundation-threads, and the fastening stitches are given a similar direction.
For these stitches, use either one material only, a fleecy thread like Coton à repriser D.M.C for instance, or else two, such as Coton à repriser D.M.C for the grounding, and a material with a strong twist like Cordonnet 6 fils D.M.C or Fil à pointer D.M.C for the stem stitch.
PLAITED STITCH (fig. 225).—When the vertical stitches are laid, a kind of plait is formed in the following way. Pass the thread three times, alternately under and over three foundation threads. To do this very accurately, you must take the thread back, underneath, to its starting-point; and consequently, always make your stitch from right to left.
[Illustration: FIG. 225. PLAITED STITCH.]
If you have chosen a washing material, and D.M.C cottons to work with, use one colour of cotton for the foundation, and Chiné d’or D.M.C No. 30, for the plaited stitch.
MOSAIC STITCH (fig. 226).—In old embroideries we often find this stitch, employed as a substitute for plush or other costly stuffs, appliquéd on to the foundation. It is executed in the same manner as the four preceding stitches, but can only be done in thick twist, such as Cordonnet 6 fils D.M.C or Ganse turque D.M.C.
[Illustration: FIG. 226. MOSAIC STITCH.]
Each stitch should be made separately, and must pass underneath the foundation, so that the threads which form the pattern are not flat, as they are in the preceding examples, but slightly rounded.
BORDER IN PERSIAN STITCH (fig. 227).—This stitch, of Persian origin, resembles the one represented in fig. 175. Instead of bringing the needle out, however, as indicated in fig. 176, take it back as you see in the illustration, to the space between the outlines of the drawing, and behind the thread that forms the next stitch. Before filling in the pattern, outline it with short stem stitches, or a fine cord, laid on, and secured with invisible stitches.
[Illustration: FIG. 227. BORDER IN PERSIAN STITCH. MATERIALS: Cordonnet 6 fils D.M.C No. 14, 15, 20 or 25. COLOURS: Noir grand Teint 310, Vert-Mousse 469 and 471, Rouge-Cardinal 346, Jaune-vieil-Or 680, Violet-Mauve 315 and 316.]
This graceful design which can be utilised in various ways is formed of leaves of 7 lobes, worked alternately in dark and light green; of flowers of 3 petals, worked in red and the centres in yellow, and of small leaves in violet. The setting, throughout, is worked either in black or in dark brown.
STRIPE WORKED IN FLAT STITCH (fig. 228).—This pattern, simple as it is, will be found both useful and effective for the trimming of all kinds of articles of dress. The bottom edge should be finished off with rounded scallops or toothed vandykes worked in button-hole stitch. The flowers in flat stitch, are worked alternately, in Rouge-Géranium 351 and 352, and the leaves alternately, in Vert-de-gris 474 and 475; the centres of the flowers are worked in knot stitch, in Jaune-Rouille 308.
[Illustration: FIG. 228. STRIPE WORKED IN FLAT STITCH.
MATERIALS—According to the stuff: Fil à dentelle D.M.C, Cordonnet 6 fils D.M.C or Coton à repriser D.M.C[A]
COLOURS—For the flowers: Rouge-Géranium 351 and 352.—For the knot stitch: Jaune-Rouille 308.—For the foliage: Vert-de-gris 474 and
475.[A]]
BOUQUET IN STRAIGHT AND ENCROACHING FLAT STITCH (fig. 229). As we have already observed, it is by no means easy to arrange the colours in an embroidery of this kind, so as to obtain a really artistic effect.
Whether the design be a conventional one or not, the great point is to put in the lights and shadows at the right place. If you want to make a faithful copy of a natural flower, take the flower itself, or a coloured botanical drawing of it, and if possible, a good black and white drawing of the same, match the colours in 6 or 7 shades, by the flower itself, keeping them all rather paler in tone, and take the black and white drawing as a guide for the lights and shadows. The colours for the leaves and petals, which should always be worked from the outside, should be chosen with a view to their blending well together.
The stamens and the centres of the flowers should be left to the last, but the veins and ribs of the leaves, should always be put in before the grounding.
[Illustration: FIG. 229. BOUQUET IN STRAIGHT AND ENCROACHING FLAT STITCH. MATERIALS: Coton à repriser D.M.C No. 50. COLOURS—For the forget-me-nots: Bleu-Indigo 312, 322 and 334.—For the other flowers:
Jaune-Rouille 365 and 366, Violet-Mauve 376, 316 and 377, Vert-Pistache 369.—For the foliage: Vert-de-Gris 474, Vert-Mousse 468, 469, 471 and 472.—For the stalks: Brun-Havane 455 and 457.[A]]
For embroideries of this kind, suitable materials must be selected; the more delicate and minute the design, and the more varied the colouring, the softer and finer should be the quality of the material employed.
Specially to be recommended, as adapted to every form of stitch and as being each of them capable of being subdivided, are Filoselle, Marseille, open Chinese silk and Coton à repriser D.M.C[A].
FLOWERS EMBROIDERED IN THE CHINESE MANNER (fig. 230).—All Chinese embroidery displays undoubted originality and wonderful skill and judgment in the choice of material and colour. It excels particularly, in the representation of figures, flowers, and animals, but differs from European work in this, that instead of using flat stitch and making the colours blend together as we do, the Chinese put them, side by side, without intermediate tones, or they sometimes work the whole pattern in knot stitch. The little knots, formed by this stitch are generally set in gold thread.
[Illustration: FIG. 230. FLOWERS EMBROIDERED IN THE CHINESE MANNER.]
Often too, instead of combining a number of colours, as we do, the Chinese fill in the whole leaf with long stitches and upon this foundation, draw the veins in a different stitch and colour. Even the flowers, they embroider in the same way, in very fine thread, filling in the whole ground first, with stitches set very closely together and marking in the seed vessels afterwards, by very diminutive knots, wide apart.
CHINESE ENCROACHING FLAT STITCH (fig. 231).—Another easy kind of embroidery, common in China, is done in encroaching flat stitch. The branch represented in our drawing, taken from a large design, is executed in three shades of yellow, resembling those of the Jaune-Rouille series on the D.M.C colour card.[A]
[Illustration: FIG. 231. CHINESE ENCROACHING FLAT STITCH.
MATERIALS: Cordonnet 6 fils D.M.C Nos. 20 to 50 or Chiné d’or D.M.C.
COLOURS—For the cotton: Jaune-Rouille 363, 308, 366.—For Chiné d’or:
Red and gold, blue and gold, green and gold.[A]]
The stitches of the different rows encroach upon one another, as the working detail shows, and the three shades alternate in regular succession. Flowers, butterflies and birds are represented in Chinese embroidery, executed in this manner. It is a style, that is adapted to stuffs of all kinds, washing materials as well as others, and can be worked in the hand and with any of the D.M.C threads and cottons.[A]
RAISED EMBROIDERY (figs. 232 and 233).—Raised embroidery worked in colours, must be stuffed or padded first, like the white embroidery in fig. 191. If you outline your design with a cord, secure it on the right side with invisible stitches, untwisting the cord slightly as you insert your needle and thread, that the stitch may be hidden between the strands. Use Coton à repriser D.M.C No. 25, for the padding. These cottons are to be had in all the colours, indicated in the D.M.C colour card, and are the most suitable for the kind of work.
[Illustration: FIG. 232. RAISED EMBROIDERY. PREPARATORY WORK.]
[Illustration: FIG. 233. RAISED EMBROIDERY. WORK COMPLETED.]
Use Coton à broder D.M.C for the transverse stitches and over the smooth surface which is thus formed, work close lines of satin stitch in silk or cotton; the effect produced, will bear more resemblance to appliqué work than to embroidery. The centres of the flowers are filled in with knot stitches, which are either set directly on the stuff or on an embroidered ground.
EMBROIDERY IN THE TURKISH STYLE (figs. 234 and 235).—This again is a style of embroidery different from any we are accustomed to. The solid raised parts are first padded with common coarse cotton and then worked over with gold, silver, or silk thread.
Contrary to what is noticeable in the real Turkish embroidery, the preparatory work here is very carefully done, with several threads of Coton à repriser D.M.C used as one. A rope of five threads is laid down, and carried from right to left and from left to right, across the width of the pattern. After laying it across to the right, as explained in fig. 234, bring the needle out a little beyond the space occupied by the threads, insert it behind them and passing it under the stuff, draw it out at the spot indicated by the arrow.
The stitch that secures the threads, should be sufficiently long to give them a little play, so that they may lie perfectly parallel, side by side, over the whole width of the pattern.
This kind of work can be done on woolen or cotton materials, and generally speaking, with D.M.C cottons, and gold thread shot with colour (Chiné d’or D.M.C.)
Very pretty effects can be obtained, by a combination of three shades of Rouge-Cardinal 347, 346 and 304, with Chiné d’or gold and dark blue or with Chiné d’or, gold and light blue.[A]
This kind of embroidery may be regarded as the transition from satin stitch to gold embroidery.
[Illustration: FIG. 234. EMBROIDERY IN THE TURKISH STYLE. PREPARATORY WORK.]
[Illustration: FIG. 235. EMBROIDERY IN THE TURKISH STYLE. WORK COMPLETED.]
GOLD EMBROIDERY.—Up to the present time, dating from the end of the eighteenth century, gold embroidery has been almost exclusively confined to those who made it a profession; amateurs have seldom attempted what, it was commonly supposed, required an apprenticeship of nine years to attain any proficiency in.
But now, when it is the fashion to decorate every kind of fancy article, whether of leather, plush, or velvet, with monograms and ingenious devices of all descriptions, the art of gold embroidery has revived and is being taken up and practised with success, even by those to whom needlework is nothing more than an agreeable recreation.
We trust that the following directions and illustrations will enable our readers to dispense with the five years training, which even now, experts in the art consider necessary.
IMPLEMENTS AND MATERIALS.—The first and needful requisites for gold embroidery, are a strong frame, a spindle, two pressers, one flat and the other convex, a curved knife, a pricker or stiletto, and a tray, to contain the materials.
EMBROIDERY FRAME (fig. 236).—The frame, represented here, is only suitable for small pieces of embroidery, for larger ones, which have to be done piece by piece, round bars on which to roll up the stuff, are desirable, as sharp wooden edges are so apt to mark the stuff.
[Illustration: FIG. 236. EMBROIDERY FRAME FOR GOLD EMBROIDERY.]
Every gold embroidery, on whatever material it may be executed, requires a stout foundation, which has to be sewn into the frame, in doing which, hold the webbing loosely, almost in folds, and stretch the stuff very tightly. Sew on a stout cord to the edges of the foundation, which are nearest the stretchers, setting the stitches, 3 or 4 c/m. apart. Then put the frame together and stretch the material laterally to its fullest extent, by passing a piece of twine, in and out through the cord at the edge and over the stretchers.
Draw up the bracing until the foundation is strained evenly and tightly. Upon this firm foundation lay the stuff which you are going to embroider, and hem or herring-bone it down, taking care to keep it perfectly even with the thread of the foundation and, if possible, more tightly stretched to prevent it from being wrinkled or puckered when you come to take it off the backing.
For directions how to transfer the pattern to your stuff, and prepare the paste with which the embroidery has to be stiffened before it is taken out of the frame, see the concluding chapter in the book.
THE SPINDLE (fig. 237).—The spindle to wind the gold thread upon, should be 20 c/m. long and made of hard wood. Cover the round stalk and part of the prongs with a double thread of Coton à broder D.M.C No. 16, or pale yellow Cordonnet D.M.C No. 25, and terminate this covering with a loop, to which you fasten the gold thread that you wind round the stalk.
[Illustration: FIG. 237. THE SPINDLE.]
THE PRESSERS (figs. 238 and 239).—These, so called ‘pressers’, are small rectangular boards with a handle in the middle. The convex one, fig. 238, should be 15 c/m. long by 9 broad; the other, fig. 239, which is quite flat, should be 32 c/m. by 20.
[Illustration: FIG. 238. CONVEX PRESSER, FOR PRESSING THE STUFF ON THE WRONG SIDE.]
[Illustration: FIG. 239. FLAT PRESSER FOR LAYING ON THE PATTERN.]
Having cut out your pattern in cartridge paper, lay it down, on the wrong side, upon a board thinly spread with embroidery paste. Let it get thoroughly impregnated with the paste and then transfer it carefully to its proper place on the stuff; press it closely down with the large presser, and with the little convex one rub the stuff firmly, from beneath, to make it adhere closely to the pasted pattern; small, pointed leaves and flowers will be found to need sewing down besides, as you will observe in fig. 242, where each point is secured by stitches. The embroidery should not be begun until the paste is perfectly dry, and the pattern adheres firmly to the stuff.
THE KNIFE (fig. 240).—Most gold embroideries require a foundation of stout cartridge paper, and, in the case of very delicate designs, the paper should further be covered with kid, pasted upon it.
[Illustration: FIG. 240. THE KNIFE. REDUCED SCALE.]
Transfer the design on to the paper or kid, in the manner described in the concluding chapter, and cut it out with the knife. You can only make very short incisions with this tool, which should be kept extremely sharp and held, in cutting, with the point outwards, and the rounded part towards you, as shown in the drawing.
TRAY TO CONTAIN THE MATERIALS (fig. 241).—Cut out as many divisions in a thin board, or sheet of stout cardboard, as you will require materials for your embroidery; these include not only gold thread of all kinds, but likewise beads and spangles of all sorts and sizes as well as bright and dead gold and silver purl, or bullion, as it is also called.
For the pieces of purl alone, which should be cut ready to hand, you should have several divisions, in order that the different lengths may be kept separate.
[Illustration: FIG. 241. TRAY TO CONTAIN THE MATERIALS.]
USE OF THE SPINDLE (fig. 242).—Gold embroidery thread should be wound double upon the spindle. It is laid backwards and forwards and secured with two stitches at each turn, as described in fig. 234. Small holes where the stitches are to come, have first to be pierced in the material with the pricker, from the right side, for the needle to pass through.
In soft stuffs, this is unnecessary, but in brocaded materials, and in plush and leather, where every prick shows and would often spoil the whole effect, it is indispensable.
[Illustration: FIG. 242. USE OF THE SPINDLE]
Gold thread which is stiff and difficult to work with, can be rendered soft and pliable by putting it into the oven, or any other warm place, for a short time.
EMBROIDERY WITH GOLD PURL (fig. 243).—Embroidery is the easiest kind of gold embroidery; you have only to thread the little pieces of purl, cut into the required lengths beforehand, like beads on your needle, and fasten them down upon the foundation like the beads in bead-work. Smooth and crimped gold purl, or silver and gold purl used together, look exceedingly well, particularly where the pattern requires effects of light and shade to be reproduced.
[Illustration: FIG. 243. EMBROIDERY WITH GOLD PURL.]
EMBROIDERY IN DIAMOND STITCH (fig. 244).—The diamond stitch is a charming novelty in gold embroidery. Short lengths of purl, not more than 1½ m/m. long, are threaded on the needle, and the needle is put in and drawn out at the same hole. These stitches which resemble knot stitches, form so many little glittering knots, turned alternately to the right and left, and look like seed-diamonds in appearance, more especially, when they are made in silver purl. The shorter the pieces are, and the more closely you set the knots together, the handsomer and richer the effect will be.
[Illustration: FIG. 244. DIAMOND STITCH.]
CHINESE GOLD EMBROIDERY (figs. 245 and 246).—We recommend the imitation of Chinese gold embroidery to our readers as an easy and grateful recreation. It consists simply in laying down a gold thread, on a delicately outlined pattern and securing it by stitches. It can be done on any material, washing or other, the costliest as well as the most ordinary.
[Illustration: FIG. 245. CHINESE GOLD EMBROIDERY. First part.]
[Illustration: FIG. 245. Second part]
[Illustration: FIG. 246. CHINESE GOLD EMBROIDERY. First part.]
[Illustration: FIG. 246. Second part.]
For a washing material use, Or fin D.M.C pour la broderie, No. 20, 30 or 40,[A] which, as it washes perfectly, is well adapted for the embroidery of wearing apparel, and household linen. Plain gold thread and gold thread with a thread of coloured silk twisted round it, are very effective used together.
Thus in fig. 245, the trees, foliage and flowers, are worked in plain gold, the grasses, in gold shot with green, the butterflies in gold with red, the two birds in gold with dark blue, and gold with light blue.
Two threads of gold should be laid down side by side and secured by small catching stitches, set at regular intervals from one another, and worked in Fil d’Alsace D.M.C No. 200,[A] of the same colour. Where the design requires it, you may separate the gold threads, and work with one alone.
The second specimen of Chinese embroidery, fig. 246, resembles the first, as far as materials and execution are concerned, but the design is different. The grotesque animals, flowers and shells it represents, can be worked separately, or connected together so as to form a running pattern.
STRIPE WORKED IN VARIOUS STITCHES (fig. 247).—All the designs described thus far, are worked in the same way, but the stripe now presented to our readers introduces them to several kinds of gold thread, and a variety of stitches. The small, turned-back petals of the flowers are worked in plain gold thread, and outlined with crimped; the rest of the petals are worked in darning stitch, with plain gold thread.
The latticed leaves are edged with picots, worked with bright purl. The other parts of the design are all worked with a double gold thread, the stalks in dead gold, the leaves in crimped. The gold thread is secured by overcasting stitches in gold-coloured thread, Jaune d’or 667, but it looks very well if you use black or red thread for fastening the crimped gold and dark or light green for the leaves and tendrils.
[Illustration: FIG. 247. STRIPE WORKED IN VARIOUS STITCHES.]
GOLD EMBROIDERY ON A FOUNDATION OF CORDS (fig. 248).—In the old ecclesiastical embroideries, especially those representing the figures of saints, we often find thick whip cords used as a foundation, instead of cardboard, for the good reason that the stiff cardboard does not give such soft and rounded contours as a cord foundation, which will readily take every bend and turn that you give to it. In the following illustrations, we have adhered strictly to the originals, as far as the manner of working the surface is concerned, but have substituted for the cord, which in their case has been used for the foundation, Cordonnet 6 fils D.M.C No.
1, which is better for padding than the grey whip cord, as it can be had in white or yellow, according to whether it is intended to serve as a foundation to silver or gold work.
[Illustration: FIG. 248. EMBROIDERY IN FLATTENED GOLD WIRE AND PURL.]
Lay down as many cords as are necessary to give the design the requisite thickness, in many cases up to 8 or 10 m/m. in height, taking care to lay them closely and solidly in the centre, and graduate them down at the sides and ends. When you have finished the foundation, edge it with a thick gold cord, such as Cordonnet d’or D.M.C No. 6 and then only begin the actual embroidery, all the directions just given, applying merely to the preparatory work.
Only four of the many stitches that are already in use and might be devised are described here. For the pattern, represented in fig. 248, flattened gold or silver wire is necessary, which should be cut into pieces, long enough to be turned in at the ends so as to form a little loop through which the thread that fastens them down is passed. Over each length of gold or silver wire small lengths of purl are laid at regular intervals, close enough just to leave room for the next stitch, the pieces of one row, alternating in position with those of the preceding one.
PLAITED STITCH IN GOLD PURL ON A CORD FOUNDATION (fig. 249).—Distribute the stitches as in the previous figure, substituting purl, for the flattened gold wire, and covering the purl with short lengths of gold thread of the same kind. All these stitches may be worked in gold and silver thread, mixed or in the one, or the other alone.
[Illustration: FIG. 249. PLAITED STITCH IN GOLD PURL ON A CORD FOUNDATION.]
SCALE STITCH WORKED IN GOLD THREAD AND PURL ON A CORD FOUNDATION (fig. 250).—Begin by covering the whole padded surface with gold or silver thread, then sew on short lengths of purl, long enough to cover six or eight threads, 2 or 3 m/m. apart, as shown in the engraving. These stitches in dead gold purl are then surrounded by shining or crimped purl.
[Illustration: FIG. 250. SCALE STITCH IN GOLD THREAD AND PURL ON A CORD FOUNDATION.]
You bring out the working thread to the left of the purl stitch, which you take on your needle, put the needle in on the other side, draw it out above the little stroke, and secure the crimped purl with an invisible stitch.
CONVENTIONAL FLOWER WORKED ON A CORD FOUNDATION (fig. 251).—The half
finished flower, represented here, was copied from a handsome piece of ecclesiastical embroidery enriched with ornament of this kind. The three foregoing stitches and a fourth, are employed in its composition. The finished portions on the left hand side, are executed in silver and gold purl, whilst the egg-shaped heart of the flower is formed of transverse threads, carried over the first padding, and secured by a stitch between the two cords. In the subsequent row, the catching stitch is set between the cords, over which the first gold threads were carried.
[Illustration: FIG. 251. CONVENTIONAL FLOWER WORKED ON A CORD FOUNDATION. MATERIALS.—For padding: Cordonnet 6 fils D.M.C Nos. 1 to 5 or Fil à pointer D.M.C No. 10.—For sewing on the gold thread and purl:
Soie de coton D.M.C No. 50 or 70, Fil à dentelle D.M.C on reels Nos. 25 to 50.[A]]
The heavier the design is, the thicker your padding should be, and cords a good deal thicker than those which are represented in the drawing should be used, as the more light and shade you can introduce into embroidery of this kind, the greater will be its beauty and value.
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: INSERTION IN CROSS STITCH, ALIKE ON BOTH SIDES, THE PATTERN LEFT BLANK.]
Tapestry and Linen Embroidery.
Tapestry is one of the oldest kinds of needlework and one which has always been popular every where.
There are two distinct sorts of canvas in use for tapestry, called respectively, ‘plain (single thread) canvas’, and ‘Penelope (double thread) canvas’. The latter is generally preferred, because it is easier to count the stitches upon it, but both make an equally good foundation for the embroidery, as the following examples will show.
Besides canvas, other fabrics bearing a close resemblance to it, are often used, especially Java linen, the close texture of which renders grounding unnecessary.
Cloth, velvet or plush can also be overlaid with canvas, the threads of which are pulled away after the pattern is finished. For work of this kind, we however prefer a material with less dressing, such as a twisted tammy, or Colbert linen, because the pulling out of the harsh rough threads of the canvas is very apt to injure the material beneath.
Stitches, worked upon two stuffs, must be drawn very tight, or they will look loose and untidy when the auxiliary fabric is taken away.
Tapestry can be done either in a frame, or in the hand; in the latter case, the ends of the piece of canvas should be weighted with stones or lead, to prevent its puckering.
The stitches, which ought completely to hide the canvas, should all lean one way and the underneath ones always from left to right, as the letters in writing.
MARKING OUT THE EMBROIDERY GROUND (fig. 252).—Before beginning a piece of canvas work and tacking on the auxiliary fabric, count how many stitches it will contain, and mark them out in tens, with a coloured thread, as shown in fig. 252, along two sides at least, in the length and breadth. Having ascertained the number of stitches both ways, divide them in two, and starting each time from the middle stitch, trace two lines, one horizontal, the other vertical, right across the canvas. The point of intersection will be the centre. This sort of ground-plan will be found most useful, and should not be pulled out until, at least, half the work be finished.
If moreover, you have corners to work, or a pattern to reverse, in the angle of a piece of embroidery, trace a diagonal line besides, from the corner to the centre.
[Illustration: FIG. 252. MARKING OUT THE EMBROIDERY GROUND.]
MATERIALS SUITABLE FOR TAPESTRY.—Hitherto, wool and silk, were the materials chiefly used for canvas work; a very thick wool for carpets, as being warmer and more durable. Silk is too delicate a fibre to resist much wear and tear, and cannot therefore be recommended for articles that are intended for constant use, and wool, though stronger, is subject to the destructive agency of moths; whereas cotton, which is cheaper than both, and quite as brilliant, is free from all these disadvantages and is extremely easy to clean.
For most kinds of tapestry we can therefore with perfect confidence, recommend the use of Coton à tricoter D.M.C Nos. 6 to 20, Cordonnet 6 fils D.M.C Nos. 3 to 15, and even Coton à repriser D.M.C No. 25.[A]
CROSS STITCH (fig. 253).—Cross stitch is the foundation of every other stitch, and the one in most common use. It is also called marking-stitch, being used for marking linen. It is worked in two lines.
In the first, the thread is carried diagonally from left to right across a square of threads, and then, downwards, underneath the two horizontal threads; in the second, the stitches are carried from the right-hand lower corner of the square to the upper left-hand corner, so that the four points of the two stitches form a perfect square.
[Illustration: FIG. 253. CROSS STITCH.]
HALF CROSS STITCH (fig. 254).—If the cotton is too coarse, or the canvas too fine, to make the double stitch, carry the thread back along the whole line and make the half-stitches across it, from left to right; the same in the case of a piece of work, which you buy with a part of the pattern ready-worked.
[Illustration: FIG. 254. HALF CROSS STITCH.]
GOBELIN STITCH ON PLAIN CANVAS (fig. 255).—This is worked over two horizontal threads and one perpendicular. In a frame, you can work the second row, from right to left, otherwise, you must turn the work round, and bring out your needle behind the last-made stitch.
[Illustration: FIG. 255. GOBELIN STITCH.]
GOBELIN STITCH ON PENELOPE CANVAS (fig. 256).—For the same stitch on Penelope canvas, you need rather a coarse needle, which will make its way easily between the threads of the canvas.
[Illustration: FIG. 256. GOBELIN STITCH ON PENELOPE CANVAS.]
REPS STITCH (fig. 257).—Contrary to Gobelin stitch, this stitch which is an imitation of reps, is worked in vertical lines, over two vertical threads and one horizontal one.
[Illustration: FIG. 257. REPS STITCH.]
TENT STITCH (fig. 258).—This stitch is simply the first half of a cross or marking stitch, worked over a single thread each way. The illustration shows the working of a row, from right to left, the thread being carried forward, underneath the vertical threads. Tent stitch is used for the most part, in conjunction with cross stitch, for the more delicate lines and the shaded parts of flowers and figures.
[Illustration: FIG. 258. TENT STITCH.]
WIDE GOBELIN STITCH (fig. 259).—This stitch covers two vertical and two horizontal threads, and advances one thread at a time.
[Illustration: FIG. 259. WIDE GOBELIN STITCH.]
BROAD CROSS STITCH (fig. 260).—Worked over two vertical and four horizontal threads, and very useful for filling in large surfaces as it can be done twice as quickly as the ordinary cross stitch. It may be varied by turning the crosses first one way and then the other.
[Illustration: FIG. 260. BROAD CROSS STITCH.]
DOUBLE STITCH (fig. 261).—Begin with a simple cross stitch over every alternate intersection of the threads then make a second row of stitches between those of the first, but in this case, over two and six threads, so that they extend beyond the first each way. In the subsequent rows, a square stitch should be opposed to a long one and a long stitch to a square one.
[Illustration: FIG. 261. DOUBLE STITCH.]
RICE STITCH (fig. 262).—Fill in the whole ground first, with large cross stitches, over four threads each way, then upon these, make the so-called rice stitches. These cross the four points of the large cross stitches, and meet in the space between, where they form another cross.
The large cross stitches should be worked in rather coarse cotton, the rice stitches in one of a finer quality.
[Illustration: FIG. 262. RICE STITCH.]
DOUBLE STITCH, SET TWO WAYS (fig. 263).—This consists of diagonal and upright cross stitches, alternately. Work from left to right, and carry the thread over four vertical threads and downwards, under two horizontal ones, then diagonally upwards, over four threads and downwards under two, then again over four vertical threads, and so on.
Coming back, you cross the first threads, and pass the working thread each time in a straight line, underneath the two threads of the canvas.
The stitches of the third and fourth rows are set, as the illustration shows, the opposite way to those of the two first, the thread being laid the contrary way. Gold thread is generally used for this second set of stitches; Or fin D.M.C pour la broderie, or Chiné d’or D.M.C will be found to be the most suitable for the purpose.[A]
[Illustration: FIG. 263. DOUBLE STITCH SET TWO WAYS.]
PLAIT STITCH (fig. 264).—It requires great attention to work this stitch, to and fro; the easier way is to carry the thread back each time, to the starting point.
[Illustration: FIG. 264. PLAIT STITCH.]
Carry the thread from left to right, over two horizontal threads, and downwards under four perpendicular ones, then under two threads, from right to left, as the figure indicates.
STEM STITCH (fig. 265).—Here, the stitches are worked in separate rows, over four threads each way. The working thread passes first under the two middle threads, from right to left, and then under the two upper ones.
[Illustration: FIG. 265. STEM STITCH.]
LEAF STITCH (fig. 266).—Carry the thread diagonally over two double threads each way, and back under one double thread, to the row whence the stitch started. Make rows of back-stitches in a different colour between the rows of long ones.
[Illustration: FIG. 266. LEAF STITCH.]
FISH-BONE STITCH (fig. 267).—The difference between this and the preceding stitch is, that the working thread after passing over three perpendicular and three horizontal threads, is secured by a back-stitch over the last intersection of the canvas threads. These back-stitches lean to the right or left, according to the direction of the long stitches.
[Illustration: FIG. 267. FISH-BONE STITCH.]
DIAGONAL WEB STITCH (fig. 268).—Stretch diagonal threads across the whole surface you are going to embroider, and secure them with rows of overcasting stitches, set, if you are working on Penelope canvas, between the double threads of the canvas. In the next rows the stitches must be set the opposite way, which produces the effect of diagonal or twilled cloth.
[Illustration: FIG. 268. DIAGONAL WEB STITCH.]
CASHMERE STITCH (fig. 269).—To imitate this texture in needlework first make one stitch over one crossing of the canvas threads, and then two stitches over two crossings.
[Illustration: FIG. 269. CASHMERE STITCH.]
FLORENTINE STITCH (fig. 270).—Florentine stitch is worked in slanting lines, the thread being carried, diagonally first over one and then over two double threads of the canvas.
[Illustration: FIG. 270. FLORENTINE STITCH.]
MOSAIC STITCH (fig. 271).—The first row consists of one short and one long stitch, alternately; the second, of short stitches only, set between the long stitches of the first row; the third row is a repetition of the first, and so on.
[Illustration: FIG. 271. MOSAIC STITCH.]
KNOTTED STITCH (fig. 272).—Carry the working thread over two threads in width and six in height, bring the needle back, four threads lower down, in front of the double threads, and insert it behind the preceding stitch, and over the middle threads, and then carry it down to the line of the stitches. In the subsequent rows, the stitches extend over four threads and encroach on two of the previous row, so that the stitches of the second row lie between those of the first.
[Illustration: FIG. 272. KNOTTED STITCH.]
STAR, OR SMYRNA STITCH (fig. 273).—Make a plain cross stitch over four threads, each way, and then over that, another cross stitch, standing upright. The same stitch can be made over six or seven threads; if you work over more than four threads, it follows that you increase the number of stitches accordingly.
[Illustration: FIG. 273. STAR, OR SMYRNA STITCH.]
ROCOCO STITCH (figs. 274, 275, 276).—After fastening in your thread, lay it over four single or two double threads, as the case may be, and carry the needle through to the left, under one double thread; then, as fig. 274 shows, bring it back over the first stitch, put it in by the side of it, and bring it out below, under half the horizontal threads covered by the first stitch. Then make a stitch to the right, similar to the one just made to the left.
[Illustration: FIG. 274. ROCOCO STITCH. FIRST STITCHES ON THE WRONG SIDE.]
When you have finished one stitch, carry the needle under one thread, in an oblique line, to the next stitch, see fig. 273. The whole pattern is worked in diagonal lines.
[Illustration: FIG. 275. ROCOCO STITCH. STITCHES ON THE RIGHT SIDE.]
[Illustration: FIG. 276. ROCOCO STITCH. COMPLETED.]
PARISIAN STITCH (fig. 277).—This stitch, though it is generally worked on silk canvas, can also be worked on the different cotton and linen materials already referred to more than once in this Encyclopedia.
It makes a very good grounding in cases where the material is not intended to be completely hidden. It consists of a long stitch over three threads, and a short stitch over one thread, alternately.
[Illustration: FIG. 277. PARISIAN STITCH.]
GREEK STITCH (fig. 278).—This differs from the ordinary cross stitch, in the oblique inclination given to the threads, and the manner in which it is begun. Instead of taking up the two threads that follow the first stitch, you bring your needle back from right to left, under the vertical threads of the first stitch, carry it downwards, and then from right to left, to a distance of four threads beyond the first stitch.
The next stitch is made like the first. The rows may be joined together, either by the short or the long stitches, but you must follow one rule throughout. This stitch is much used in Slavonic countries, for the adornment of linen garments, and there we have observed that the short stitches are generally made to encounter the long ones. A coarse material that covers the ground well, such as, Coton à tricoter D.M.C Nos. 6 to 12, is the best one to use for this stitch.
[Illustration: FIG. 278. GREEK STITCH.]
SCOTCH STITCH (fig. 279).—Squares, composed of slanting stitches, made over one, three, five, three threads respectively, and then again over one thread, and separated from each other by rows of Gobelin stitches, constitute what is ordinarily known by the name of Scotch stitch.
[Illustration: FIG. 279. SCOTCH STITCH.]
MOORISH STITCH (fig. 280).—For this stitch, instead of surrounding squares of stitches, made in the way we have just described, with Gobelin stitch, the squares are made to touch, rising like steps one above the other, and bordered only at the sides by Gobelin stitch.
[Illustration: FIG. 280. MOORISH STITCH.]
ORIENTAL STITCH (fig. 281).—Here, you make four diagonal stitches over one, two, three and four double threads respectively; which four stitches form so many triangles, one above the other. The empty spaces between are filled up with Gobelin stitches covering two threads.
[Illustration: FIG. 281. ORIENTAL STITCH.]
SHELL STITCH (fig. 282).—Carry your thread upwards over six horizontal threads, then from right to left, under one vertical thread and downwards over six horizontal ones. When you have made four vertical stitches in this way, bring the needle out behind the third double thread, counted lengthways, and between the third and fourth, counted across, and fasten the four long stitches together with a back-stitch, to the middle thread of the canvas. Draw a thread of a different colour twice through these back-stitches, so as to form small knots like shells, and then fill in the ground between the rows of long stitches, with back-stitches.
[Illustration: FIG. 282. SHELL STITCH.]
JACQUARD STITCH (fig. 283).—If you have a large plain surface to cover, you should choose a stitch that forms a pattern in itself.
Jacquard stitch and others which we shall describe later on, will be found to produce the effect of brocaded stuff. To work Jacquard stitch, make six stitches underneath one another, over two double threads, and six by the side of one another, from left to right, over two double threads. The second row consists of the same number of stitches, similarly worked downwards and to the side, but over one double thread only.
[Illustration: FIG. 283. JACQUARD STITCH.]
BYZANTINE STITCH (fig. 284).—Here, you make the same number of stitches as in the preceding figure but with this difference, that the two rows of stitches are made either over two, or four threads.
[Illustration: FIG. 284. BYZANTINE STITCH.]
MILANESE STITCH (fig. 285).—In the first row, the back-stitch is made alternately, first over four diagonal crosses and then over one; in the second row, over three and two; in the third, over two and three, in the fourth, over one and four. The last long stitches should come under the last short ones and the short ones, in the middle of the last long ones.
[Illustration: FIG. 285. MILANESE STITCH.]
PLUSH STITCH (fig. 286).—This stitch, also called Astrachan stitch, by means of which a very good imitation of an Oriental rug can be produced, consists of loops, each secured by a cross stitch; the best way to ensure these loops being even and regular is to make them over a narrow wooden ruler, or a piece of whalebone.
The effect can be varied by cutting the loops, which gives the surface the appearance of velvet.
[Illustration: FIG. 286. PLUSH STITCH.]
The illustration represents the middle loops only, as cut, for the cut and the uncut stitch can both be introduced into the same piece of embroidery. For example, the borders in figs. 290, and 291, are worked in open or cut plush stitch, whilst in the centres, the stitch is left uncut. Two stitches of a similar kind, called Smyrna and Malta stitch, suitable for making rugs or carpets, are described in the last chapter but one in the book.
CHAIN STITCH (fig. 287).—Generally speaking, this stitch is only used for the adornment of under-linen or small articles of fancy-work but it can also be employed in copying cross stitch patterns. In old collections we often meet with very interesting pieces of needlework, which were used for hangings or screens, where the figure-subjects, are executed in chain stitch. Patterns in many colours, gain immensely by being worked in this stitch, the colours blend together better than in any other, and even the shape of the stitch contributes to soften the contrasts of colour.
Chain stitch cannot, like other stitches, be worked to and fro, nor can all the stitches of one row be finished first, as is generally possible in cross stitch work, each row must be begun separately, and always from the same side, and a different needle should be used for each colour, as the material has often to be changed.
[Illustration: FIG. 287. CHAIN STITCH.]
The stitch is worked as follows; after fastening in your thread, insert the needle at the same hole it came out of, and bring it out two threads lower down. Keep the loop, formed by the working thread, under the point of the needle. The thread should not be drawn up tightly but left to form a rather loose, round loop. For the next stitches, insert the needle close to the thread that issues from the last loop.
PATTERN FOR BORDERS OR GROUNDING (fig. 288).—This simple but most effective design, copied from one of the most beautiful of Oriental carpets, can be executed in, either cross stitch, plush stitch, or chain stitch. To make a wider border still, the diagonal lines that divide the figures shaped like an S, have only to be prolonged, and the figures repeated.
The colours have been chosen with the view of reproducing as nearly as possible the subdued and faded tones, which time has imparted to the original.
[Illustration: FIG. 288. PATTERN FOR BORDERS OR GROUNDINGS. MATERIALS:
Coton à broder D.M.C Nos. 6 to 12, Cordonnet 6 fils D.M.C Nos. 3 to 15, Fil à pointer D.M.C Nos. 10 to 30, or Coton à repriser D.M.C No. 25.
EXPLANATION OF THE SIGNS PREFIXED TO THE COLOURS: ([symbol])
Rouge-Cardinal 346, ([symbol]) Rouge-Cornouille 449, ([symbol]) Bleu-Indigo 311, and ([symbol]) Bleu-Indigo 322, ([symbol]) Gris-Cendre 414, ([symbol]) Bronze doré 585 and ([symbol]) Vert-Mousse 470.[A]]
PATTERN FOR GROUNDING (fig. 289).—Diagonal lines, intersected by balls, serve here as a setting for quaintly shaped flowers and leaves.
The outlines are all worked in cross stitch, and the solid parts, in either tent stitch or Gobelin stitch.
[Illustration: FIG. 289. PATTERN FOR GROUNDING. MATERIALS: Coton à tricoter D.M.C Nos. 6 to 16, Cordonnet 6 fils D.M.C Nos. 5 to 15 or Coton à broder D.M.C No. 16.[A] EXPLANATION OF THE SIGNS PREFIXED TO THE COLOURS: ([symbol]) Noir grand Teint 310, ([symbol]) Jaune d’Ocre 676, ([symbol]) Violet-Mauve 315, ([symbol]) Rouge-Géranium 349, ([symbol]) Rouge-Aurore 360, ([symbol]) Bleu-Indigo 312, ([symbol]) Bleu pâle 668, ([symbol]) Rouge-Cornouille 449, ([symbol]) Vert-de-gris 474, ([symbol]) Vert-de-gris 475, ([symbol]) Grounding.[A]]
PART OF A DESIGN, SUITABLE FOR CARPETS (figs. 290 and 291). Our space
will not admit of our reproducing more than a quarter of this design.
Colours of the softest shades should be selected for it. A black line divides the pattern into four quarters. The upper quarter on the right, and the lower one, on the left, should be worked in blue, and the upper one on the left, copied from fig. 290.
[Illustration: FIG. 290. PART OF A DESIGN SUITABLE FOR CARPETS.
MATERIALS: Fil à pointer D.M.C Nos. 10 to 30, Coton à tricoter D.M.C Nos. 6 to 12, Cordonnet 6 fils D.M.C Nos. 3 to 10, or Coton à repriser D.M.C No. 12.
EXPLANATION OF THE SIGNS PREFIXED TO THE COLOURS: ([symbol]) Noir grand Teint 310, Rouge-Grenat 358, ([symbol]) Rouge-Cornouille 450, ([symbol]) Bleu-Indigo 311 and ([symbol]) Bleu-Indigo 322, ([symbol]) Vert métallique 465, ([symbol]) Gris-Noisette 424.[A]]
The narrow border, in red, blue and green, is to be repeated after the broad band, which is represented in fig. 291, has been added to the grounding. A very good effect is obtained, if in the broad border, fig. 291, you vary the background of the different subjects.
[Illustration: FIG. 291. OUTER BORDER OF THE DESIGN FOR CARPETS FIG.
- MATERIALS: Fil à pointer D.M.C Nos. 10 to 30, Coton à tricoter
D.M.C Nos. 6 to 12, Cordonnet 6 fils D.M.C Nos. 3 to 15, or Coton à repriser D.M.C No. 12.[A] EXPLANATION OF THE SIGNS PREFIXED TO THE COLOURS: ([symbol]) Noir grand Teint 310, ([symbol]) Rouge-Grenat 358, ([symbol]) Bleu-Indigo 311, ([symbol]) Vert métallique 465, ([symbol]) Jaune-vieil-Or 679, ([symbol]) Gris-Noisette 424, ([symbol]) Rouge-Cornouille 450.[A]]
LINEN EMBROIDERY.—The stitches used in linen embroidery are very similar to those used in canvas work. The ordinary cross stitch, as represented in fig. 253, is the one most commonly used, but it is not so effective as the two-sided stitches, which in the beautiful old needlework of the 15th, 16th and 17th centuries, have always excited our wonder and admiration.
STUFFS SUITABLE FOR LINEN EMBROIDERY.—Most embroidery of this kind, and more especially the Italian, is done on very fine linen. Such fine work however, requires more time and patience than people, in these days, are as a rule disposed to bestow on work intended merely for pleasure and recreation. To meet the requirements of the day, therefore, in addition to the finer kinds of linen, a great variety of textures, are now manufactured, the threads of which, being thick and round, can be easily counted. The cross stitches that are worked on Cuba, Ceylon or Batavia linen, are large and coarse, those on linen-canvas, Russian linen, twisted tammy, and Rhodes linen, small and fine.
Linen fabrics are either white, unbleached or cream-coloured. All three are used for embroidery, but the coloured cottons show up best on the cream ground; on the white, they look hard and crude, and on the unbleached, dull and faded.
MATERIALS SUITABLE FOR LINEN EMBROIDERY—As most linen embroidery is executed on articles that are subjected to frequent washing, the D.M.C cottons, which are to be had in every shade and colour, are the best for the purpose. For coarse stuffs, coarse cotton should be used, such as knitting cotton, Coton à tricoter D.M.C Nos. 6, 8, 10, 12 and 14,[A] which will be found a very good substitute for wool; or six-cord crochet cotton (Cordonnet 6 fils D.M.C) Nos. 3, 4, 5, 10 and 15,[A] which gives quite as full and brilliant a stitch, as silk-twist. Finer cottons should be used for the finer stuffs, such as embroidery cotton (Coton à broder D.M.C) Nos.
6 to 200,[A] and lace thread (Fil à dentelle D.M.C) Nos. 30 to 150.[A] In many cases, even darning cotton (Coton à repriser D.M.C) can be used, as like Algerian silk, it can be split or taken double, to suit the stuff.
PLAIN CROSS STITCH ON AUXILIARY CANVAS (fig. 292).—Plain cross stitch, commonly called marking stitch, has already been described in fig. 253. But it may be well to observe, that when an auxiliary material is used, it should be most carefully tacked upon the stuff following the thread of the same, and a sufficient margin left to allow of the drawing out of the canvas threads, when the work is finished.
[Illustration: FIG. 292. PLAIN CROSS STITCH ON AUXILIARY CANVAS.]
TWO-SIDED CROSS STITCH, WORKED IN FOUR ROWS OF STITCHES (figs. 293,
294, 295).—Straight lines of cross stitch, alike on both sides, can be worked in two journeys to and fro. Working from left to right, begin by fastening in your thread, never with a knot, but by two or three little running stitches, which are hidden afterwards by your first cross stitch. Directing your needle to the right, pass it diagonally over a double cross of the warp and woof of the canvas, and so on to the end of the line.
Having reached the last stitch, draw out your thread in the middle of it, make an auxiliary diagonal stitch downwards to the right, bring the needle up in the middle of the last stitch, take it thence, upwards to the left, across two threads, and begin the return journey, from right to left, crossing and thus completing the first row of stitches. In the auxiliary stitch with which you begin the backward journey, the thread lies double on both sides. Fig. 295 shows how to pass down to the next row.
[Illustration: FIG. 293. FIRST HALF OF THE FIRST JOURNEY AND AUXILIARY STITCH FOR RETURNING.]
[Illustration: FIG. 294. ONE JOURNEY AND FIRST HALF OF THE SECOND FINISHED, AND AUXILIARY STITCH LEADING TO THE SECOND RETURN.]
[Illustration: FIG. 295. THE TWO JOURNEYS TO AND FRO, COMPLETING ONE ROW OF CROSS STITCH, BOTH SIDES ALIKE.]
TWO-SIDED MARKING STITCH (figs. 296 and 297). The above mode of working two-sided cross stitch cannot be applied to letters, or patterns in broken lines, which both consist chiefly of isolated stitches. Figs. 296 and 297 explain the course of the stitches in embroidery of this kind.
The working detail A, Fig. 296, indicates the spot for the thread to enter the stuff, and the position of the needle for the first and second stitches; B, the first two stitches completed, with an auxiliary stitch to the right, the thread drawn out on the right, and the position of the needle for the fifth stitch that completes the cross; G shows the completion of the stitch begun at B and the position of the needle for a second stitch to the right; D, one cross stitch completed and another begun, immediately beneath A. In fig.
297, E shows how to work stitches to the left; F, an auxiliary stitch to reach an isolated cross stitch on the right, G, auxiliary stitches between two isolated cross stitches, and H, a second and last auxiliary stitch to complete the cross.
It requires both practice and care to do this two-sided marking stitch, so as not to disfigure the stuff by superfluous stitches.
[Illustration: FIG. 296. TWO-SIDED MARKING STITCH. DIFFERENT POSITIONS OF THE NEEDLE.]
[Illustration: FIG. 297. TWO-SIDED MARKING STITCH. DIFFERENT POSITIONS OF THE NEEDLE.]
CROSS STITCH FORMING A SQUARE AT THE BACK (figs. 298 and 299).—Many of the alphabets we so admire in old samplers are worked in cross stitch, that forms a square at the back. Each stitch has to be finished off before another is begun; if you carefully examine figs. 298 and 299, which show severally the right and the wrong sides of the stitch, you will find no difficulty in mastering it. Letter A, fig.
296, shows the entrance of the thread, the position of the needle for half the cross stitch on the right side, and the second side of the square at the back, as shown in fig. 299, A. Letter B, fig. 298, shows the cross stitch finished, and the position of the needle for the third side of the square on the wrong side, indicated by the same letter in fig. 299. C, in both figures, indicates a stitch which is double on the right side, and on the wrong side forms the fourth side of the square, whilst letter D, explains how to continue the stitches.
[Illustration: FIG. 298. RIGHT SIDE OF THE CROSS STITCH, FORMING A SQUARE AT THE BACK.]
[Illustration: FIG. 299. SQUARE STITCH FORMING THE BACK OF THE CROSS STITCH.]
TWO-SIDED ITALIAN STITCH (figs. 300, 301, 302, 303).—Two-sided Italian stitch consists of cross stitches, alike on both sides, divided from each other by horizontal and vertical stitches. The upper and lower stitches should all slope one way, as in plain cross stitch.
Italian stitch is worked in one journey, to and fro. Fig. 300 shows how to fasten in the thread, and place the needle for the first stitch, from right to left; fig. 301, the position of the needle from left to right, to form the cross at the back, and the vertical stitch to the left, on the right side; fig. 302, the position of the needle, for a two-sided horizontal stitch at the bottom of the cross, where upon you proceed as in fig. 300. Fig. 303 explains the return of the thread, which completes the double crosses and the lines between.
The horizontal lines, not made on the first journey, are added on the way back. In conclusion, pass the needle back, horizontally, from left to right, to make the final stitch over the cross, and then make the stitch between, as shown in fig. 303. On a thin stuff, this stitch produces an extremely pretty effect, resembling lattice-work, provided the thread be tightly drawn in the working.
[Illustration: FIG. 300. TWO-SIDED ITALIAN STITCH. INTRODUCTION OF THE THREAD AND POSITION OF THE NEEDLE FOR THE FIRST STITCH.]
[Illustration: FIG. 301. TWO-SIDED ITALIAN STITCH. POSITION OF THE NEEDLE FOR THE 2ND AND 3RD STITCHES.]
[Illustration: FIG. 302. TWO-SIDED ITALIAN STITCH. POSITION OF THE NEEDLE FOR THE 4TH AND 5TH STITCHES.]
[Illustration: FIG. 303. TWO-SIDED ITALIAN STITCH. RETURN JOURNEY, WHICH COMPLETES THE CROSS STITCH.]
MONTENEGRIN CROSS STITCH (figs. 304, 305, 306).—The Slavonic tribes of the southern districts of E. Europe, especially the Montenegrins, have a great partiality for this stitch, which has been rarely noticed, hitherto, in books on needlework. The right side shows cross stitches with a double thread underneath, and divided by vertical stitches; the wrong side, regular cross stitches, also divided by vertical stitches.
Coarse cotton should be used for this stitch; it produces a richer effect and not only covers the stuff better, but also the underneath stitch which in the Slavonic work, is entirely hidden by the cross stitches.
Begin, as letter A indicates, with a long, slanting stitch, across 4 and 8 threads, then, bringing your needle back from right to left, under four threads, draw it out, carry it over the first long stitch, and insert it again from left to right, under the first four threads of the canvas. These four stitches finished, proceed to the fifth and sixth, which as B shows, cross the first four, then repeat the first stitch.
The threads that form the stitches on the wrong side, should always be opposed to each other, that is, one cross should lean to the right, the other to the left, as shown in fig. 305. This variation in the inclination of the stitches, which is regarded as a fault in plain cross stitch, is indispensable here, and produces a charming effect on the wrong side.
[Illustration: A B FIG. 304. MONTENEGRIN CROSS STITCH. 1ST, 2ND, 3RD,
4TH AND 5TH STITCH AND TRANSVERSAL STITCH]
[Illustration: A B FIG. 305. MONTENEGRIN CROSS STITCH. POSITION OF THE STITCHES ON THE WRONG SIDE.]
[Illustration: FIG. 306. MONTENEGRIN CROSS STITCH. A ROW OF STITCHES FINISHED.]
PLAITED ALGERIAN STITCH (fig. 307).—The distinguishing feature of this stitch is, that it only advances one thread at a time. It should be begun on an uneven number of threads, and like the Montenegrin stitch, should be worked with coarse cotton. The rows may touch, either at the top or at the bottom of the stitch, so long as you keep to one plan throughout.
[Illustration: FIG. 307. PLAITED ALGERIAN STITCH.]
TWO-SIDED SPANISH PLAITED STITCH (figs. 308 and 309).—This stitch has the advantage of being, not only very effective, but also very quickly executed. It is worked in two rows, forwards and backwards. All cross stitch patterns can be worked in Spanish stitch. The gaps, which are occasioned by the long stitches, have to be filled in with short ones.
In itself, the stitch consists of slanting stitches, three threads a part, alike on both sides, and advances three threads at a time, as shown in figs. 308 and 309.
[Illustration: FIG. 308. TWO-SIDED PLAITED SPANISH STITCH.]
[Illustration: FIG. 309. TWO-SIDED PLAITED SPANISH STITCH.]
TWO-SIDED LINE STITCH (figs. 310 and 311).—Square stitch, Holbein stitch, line, or stroke stitch, as it is sometimes called, and setting stitch, are all worked on one principle. Though all these two-sided stitches are related to each other, and by no means difficult of execution, those new to the work will find a little practice necessary, to make the stitches follow in their proper order. Fig. 310 explains how the needle has to pass, alternately, step by step, over and under the threads of the stuff, and fig.
311, how the threads, left blank the first time, are covered on the way back. The great difficulty is how to place your first row of stitches so as to ensure an unbroken course back. It is as well before setting out, to ascertain clearly the most direct course back, so that you may not come to a stand-still, or be obliged to make unnecessary stitches on the wrong side. If you have to pass obliquely across the stuff, as in patterns figs. 326, 327, 328, 329, 331 and 333, proceed in the same way as though you were covering the straight threads of a fabric.
[Illustration: FIG. 310. TWO-SIDED LINE STITCH. FORWARD ROW.]
[Illustration: FIG. 311. TWO-SIDED LINE STITCH. BACKWARD ROW.]
TWO-SIDED INSERTION (figs. 312, 313, 314, 315, 316, 317, 318).—We conclude this series of stitches with a description of a pretty, two-sided insertion, suitable for joining stripes of work of different widths together. In pieces of old needlework, we often find handsome, coloured patterns, joined together by a piece of lace or some quite different kind of work. The insertion represented in fig. 317, is a very good substitute for either. Fig.
312 explains the first stitch and the course of the second, from left to right, under 3 vertical and 3 horizontal threads; the 3rd stitch to the left, over 6 vertical threads, and the beginning of the 4th stitch. Fig. 313 shows the 4th stitch completed, and the direction the 5th and 6th stitches have to take; fig. 314, the 6th completed, and the position of the needle for the 7th and 8th; fig. 315, the 9th lower, horizontal stitch, over 6 vertical threads, the 10th backward stitch, and the position of the needle for the 11th and last stitch. Fig.
317 represents a whole series of stitches, and fig. 318, the back of the work, which though quite a different pattern, will combine very well with any two-sided embroidery.
[Illustration: FIG. 312. TWO-SIDED INSERTION. FIRST DETAIL.]
[Illustration: FIG. 313. TWO-SIDED INSERTION. SECOND DETAIL.]
[Illustration: FIG. 314. TWO-SIDED INSERTION. THIRD DETAIL.]
[Illustration: FIG. 315. TWO-SIDED INSERTION. FOURTH DETAIL.]
[Illustration: FIG. 316. TWO-SIDED INSERTION. FIFTH DETAIL.]
These insertions can be worked on any stuff, but the stitches, must be done, both ways, on a number of threads, divisible by 3. Thus, the first stitch may cover 6, 9, or 12 threads, but never 8, 10, 12 or 14. [Transcriber’s note: 12, here, appears to be an error in the original.]
[Illustration: FIG. 317. TWO-SIDED INSERTION. ROW OF STITCHES FINISHED.]
[Illustration: FIG. 318. TWO-SIDED INSERTION, SHOWING THE BACK OF FIG. 317.]
GOTHIC BORDERS IN GOBELIN AND CROSS STITCH (figs. 319 and 320).—We
are indebted for both these pretty patterns, which are quite Gothic in their character, to a visit we paid to the national museum at Munich, where we discovered them amongst a heap of other old valuables, lying un-heeded in a remote corner. Their simple graceful outlines render them peculiarly suitable for the decoration of table-cloths, counterpanes, curtains, etc. All embroideries of this kind should be finished off with a deep fringe, made in the stuff itself, or knotted on to it or may be trimmed with a heavy thread lace, of a wide width, corresponding with the work in character.
The design may be worked either in one shade, as in fig. 319, or in two, as in fig. 320, where all the outside stitches are worked in the darker shade of the given colours.
[Illustration: FIG. 319. GOTHIC BORDER IN CROSS STITCH. MATERIALS: Coton à tricoter D.M.C Nos. 6 to 12, Coton à broder D.M.C Nos. 16 to 35, or Cordonnet 6 fils D.M.C Nos. 3 to 15.[A] COLOURS: Rouge-Turc 321, or two shades of Bleu-Indigo, 311 and 334, or two shades of Rouge-Grenat, 358 and 359 or two shades of Brun-Acajou, 300 and 402.[A]]
[Illustration: FIG. 320. GOTHIC BORDER IN CROSS STITCH. MATERIALS: Coton à tricoter D.M.C Nos. 16 to 35. COLOURS: Bleu-Indigo 311 and 344, or Rouge-Cardinal 346 and Rouge-Géranium 335, or Gris-Tilleul 391 and
331.[A]]
POWDERING AND BORDER. ALBANIAN SUBJECTS (figs. 321 and 322).—The arrangement of colours for these charming patterns, of Albanian origin, should be as follows; the dark-coloured crosses, red, the lighter ones, alternately blue and green, the lightest, yellow.
[Illustration: FIG. 321. POWDERING. ALBANIAN SUBJECT. MATERIALS: Coton à tricoter D.M.C Nos. 6 to 12, Cordonnet 6 fils D.M.C Nos. 3 to 25 or Coton à repriser D.M.C No. 12, 25 or 50.[A]
COLOURS: Rouge-Cardinal 347, Bleu-Indigo 322, Vert métallique 465, Jaune-Orange 444, Gris-Brun 409.[A]]
In fig. 321, most of the stitches in every other diagonal row, are worked in red, the others in green or blue; in the intermediate rows the flowers are worked alternately, in green and red, or blue and red, and throughout, the centre of each figure should consist of 4 stitches in yellow.
[Illustration: FIG. 322. ALBANIAN SUBJECT. MATERIALS: Coton à tricoter D.M.C Nos. 6 to 12, Coton à broder D.M.C Nos. 16 to 35 or Cordonnet 6 fils D.M.C Nos. 3 to 25.[A] COLOURS: Rouge-Cardinal 347, Bleu-Indigo 312, Jaune-Orange 444, Vert métallique 465, Gris-Brun 409.[A]]
In fig. 321, which serves as a border to the above, only the stalks of the 4 conventional pinks, which, with the cross in their middle, form a square, are in brown.
These squares are separated from the bottom border by an insertion, in Gobelin stitch, worked over 6 threads, in red, blue, green and yellow, from 20 to 25 stitches of each. This band is edged on both sides with a row of stem stitches, worked in yellow over 4 threads. The Holbein stitches that border the band, can be made in whichever colour the worker prefers, or else in red and gold thread.
BORDERS IN STROKE STITCH (figs. 323, 324, 325).—These three patterns will give our readers an opportunity of perfecting themselves in two-sided, square stitch (see figs. 310 and 311), also called stroke, or line stitch, according as it is worked, in oblique, or straight rows.
[Illustration: FIG. 323. BORDER IN STROKE STITCH. MATERIALS: Coton à marquer D.M.C Nos. 5 to 200.[A] COLOURS: Rouge-Turc 321 or Bleu-Indigo
312.[A]]
[Illustration: FIG. 324. BORDER IN STROKE STITCH. MATERIALS: Coton à repriser D.M.C No. 50.[A] COLOURS: Vert-Pistache 319, or Vert-Mousse
470.[A]]
[Illustration: FIG. 325. INSERTION IN STROKE STITCH. MATERIALS: Coton à broder D.M.C Nos. 16 to 60.[A] COLOURS: Rouge-Turc 321, or Rouge-Grenat 309, or Bleu-Indigo 311.[A]]
We again recommend our readers, to begin by ascertaining the course the stitches should take, in order to avoid all unnecessary stitches and be sure of finding their way back according to the prescribed rule.
CORNERS IN STROKE STITCH (figs. 326 and 327).—These pretty little patterns are suitable for the decoration of ladies’ and children’s collars, fine pocket-handkerchiefs and finger napkins, and can be worked in one or two colours, as preferred. If two colours be used, the darker should be taken for the interior, the lighter for the narrow outside edge.
[Illustration: FIG. 326. & FIG. 327. CORNERS IN LINE STITCH. MATERIALS:
Coton à broder D.M.C Nos 35 to 200 or Fil à dentelle D.M.C Nos. 25 to 70.[A] COLOURS: Bleu-Indigo, or Rouge-Cardinal, or Brun-Caroubier, or Violet-Lie-de-vin.[A]]
STRIPE IN STROKE STITCH (fig. 328).—This is copied from a piece of Italian work, though from a resemblance in the different subjects to the rose, thistle and shamrock, if might have been supposed to be of English origin. The original work was executed in a most brilliant purple red which time has toned down to the colour of Jaune-Rouille 308, or Brun-Cuir 432, one or other of which we recommend, as being the only colours with which any thing approaching the refined distinguished look of the old embroidery, can be given to the new.
[Illustration: FIG. 328. STRIPE IN STROKE STITCH. MATERIALS: Cordonnet 6 fils D.M.C Nos. 15 to 50, Coton à broder D.M.C Nos. 16 to 35, or Coton à repriser D.M.C No. 12, 25 or 50.[A] COLOURS: Jaune-Rouille 308, or Jaune-vieil-Or 680.[A]]
GROUNDING IN DIAGONAL LINES (fig. 329).—This pattern can be worked, in any of the previous stitches, or in back-stitch. It is only suitable for large surfaces, on account of the diagonal lines, and should be worked, all in one colour. It can be varied by adding sprays to the upper sides of the slanting stalks, like those on the lower sides, turned either the same way, or upwards. Skilled workers will readily contrive the middles for themselves, by combining the different subjects and putting them together in various positions, either diagonally or at right angles to each other, with the help of the Penelope mirror.[2]
[Illustration: FIG. 329. GROUNDING IN DIAGONAL LINES. MATERIALS: Coton à tricoter D.M.C Nos. 6 to 16, or Coton à broder D.M.C Nos. 16 to 100.
COLOURS: Bleu-Indigo 322, or Rouge-Cardinal 347.]
POWDERING IN CROSS, STROKE AND STAR STITCH (fig. 330).—This charming combination of cross, stroke and star stitches, can be made use of wherever embroidery is available as a means of decoration.
The cross stitches, in which the solid parts of the pattern are worked, should be in one colour only, the stroke and star stitches, in Chiné d’or D.M.C.[A]
[Illustration: FIG. 330. POWDERING IN CROSS, STROKE AND STAR STITCH.
MATERIALS: Coton à repriser D.M.C No. 50 and Chiné d’or D.M.C.[A] COLOURS—For the Cotton: Rouge-Grenat 326.—For the Chiné: Bleu-Indigo and gold.[A]]
BORDER IN GREEK STITCH (fig. 331).—All the darker lines here, should be worked in black, colour 473, the leaves in the form of steps, alternately in light and dark red up to the stalks, the line of demarcation being indicated by the different direction of the stitches, so that two light leaves, and two dark leaves, should always face each other.
[Illustration: FIG. 331. BORDER IN GREEK STITCH. MATERIALS: Coton à broder D.M.C Nos. 16 to 25, or Coton à repriser D.M.C Nos. 12 to 50.
COLOURS: Rouge-Géranium 349 and 351, Jaune-Rouille 364, Bleu de France 341, Bleu pâle 668, Noir-Vert 473, Or fin D.M.C pour la broderie No. 30 and Chiné d’or D.M.C No. 30.]
In the original, the cross bars that unite the leaves, are in yellow, whilst the detached figures that separate them, are worked, those that come between the light red leaves, in pale blue, and those between the dark red ones, in gold thread. The exterior part of the figure is filled in with the different colours, indicated above; with the exception of the small squares in Gobelin stitch, which should all be worked in plain gold, or Chiné d’or D.M.C, green and gold. The SS in the narrow outside border, should be worked in two shades of blue; the outside stitches in colour 341 and the solid parts in colour 668.
The little figures with the transverse bars that unite the SS, should be set in black, and filled in, alternately, in light and dark red, and in yellow.
GROUNDING (fig. 332).—This grounding was copied from a beautiful old cushion-cover and will be found particularly useful in the confection of small embroidered articles, because the pattern will always form a centre point in itself. A light, brilliant red, such as either of the two colours indicated beneath the figure, will best reproduce the tone of the original.
[Illustration: FIG. 332. GROUNDING. MATERIALS: Coton à tricoter D.M.C Nos. 6 to 10, or Coton à broder D.M.C Nos. 16 to 100.[A] COLOURS:
Rouge-Cardinal 804, or Rouge-Cornouille 450.[A]]
In making the little stars that connect the different squares, the mode we recommended for working stroke stitch should be adopted, that is, beginning, by bringing the needle out in the middle, making 7 stitches, and at the eighth, carrying the needle back under the first, to the spot whence you started. The stitches will then be alike on both sides.
WALLACHIAN BORDER (fig. 333).—A piece of Wallachian needlework, executed on rough linen, and uncommon, both in colour and design, suggested the charming embroidery, here represented. In place of the somewhat violent colours, which indicate an undeveloped taste, we have substituted softer and more refined ones. All the stroke stitches of the middle stripe and of the two border stripes, top and bottom, as well as the darker portions of the small dice, subdivided into eight, in the bottom border, and of the small diagonal squares in the top border, worked in Gobelin stitch, are in red, colour 346.
The setting of upright stroke stitches round the large centre figures, as well as the straight lines that divide these same figures into four, are worked in yellow, colour 680.
[Illustration: FIG. 333. WALLACHIAN BORDER. GOBELIN STITCH, STROKE STITCH AND SPANISH HALF-STITCH. MATERIALS.—For Rhodes linen No. 1:
Cordonnet 6 fils D.M.C No. 15, and Or fin D.M.C pour la broderie No. 30.—For other stuffs: Coton à tricoter D.M.C Nos. 6 to 16, or Coton à repriser D.M.C No. 12, 25 or 50 and Or fin D.M.C.[A]
COLOURS: Rouge-Cardinal 346, Rouge-Géranium 326, Vert-Pistache 319 and Jaune-vieil-Or 680.[A]]
The squares and the half-squares are worked in colour 326, green 319, and gold thread; colour 326 is indicated in the illustration by the darkest shade, green 319, by the medium shade, and the gold thread by the lightest shade.
The stitches in the right bottom quarter and top left one, incline upwards from left to right, in the two other quarters they incline the contrary way. The Spanish half-stitch as shown in fig. 309, can only be done over 4 and 2 threads and worked one way, not to and fro.
The general effect is very much heightened by the introduction of one or two rows of stitches, worked in gold thread, into the straight lines on either side of the stripes; all the light parts of the design moreover, should be worked in gold thread.
BORDERS IN SEVERAL SHADES OF ONE COLOUR (figs. 334 and 335). In some beautifully embroidered Chinese hangings, that latterly came under our notice, the principal subject was the figure of a mandarin, in a very richly decorated dress. The pretty pattern, given in fig. 334, was copied from the collar and cuffs of this dress. We should advise working it in several shades of pink or red, or in a single one of the colours indicated above.
[Illustration: FIG. 334. BORDER IN SEVERAL SHADES OF ONE COLOUR.
MATERIALS: Coton à tricoter D.M.C Nos. 12 to 20, Coton à broder D.M.C Nos.. 16 to 35 or Coton à repriser No. 12, 25 or 50. COLOURS: Three shades of either Bleu-Indigo, Rouge-Grenat, or Violet-Mauve etc. etc.]
[Illustration: FIG. 335. BORDER IN SEVERAL SHADES OF ONE COLOUR.]
The border of these hangings furnished us with pattern 335, which will be found to look best, worked in three very distinct shades of blue.
The grotesque heads of animals, and the flowers and branches which break the running pattern, and are a Chinese speciality, distinguish this design from the more conventional patterns of the present day.
We recommend these two pretty patterns, to our readers notice, as likewise adaptable by transposition, to centres, or by repetition, to broad stripes. With very little trouble they can be converted, into a variety of subjects, such as it is often difficult to find ready made, and exactly suited to the purpose in hand.
BORDER IN GREEK STITCH WITH A FOOTING, COMPOSED OF BRANCHES (fig. 336).—This design can be worked in Greek, Slavonic, Montenegrin, or plaited Algerian stitch. Our illustration worked in Greek stitch, shows how one stitch encroaches upon another, and how the thread is carried from one isolated stitch, to another.
[Illustration: FIG. 336. BORDER IN GREEK STITCH WITH A FOOTING, COMPOSED OF BRANCHES.]
It will be found to be an improvement if the stitches are so made as to follow the direction of the lines. The central subject may be repeated two or three times, according to the width of border required. The edging is the same throughout. The use of the ‘Penelope mirror’ for repeating patterns is described in the concluding chapter of the book.
TABLE-COVER IN GOBELIN AND STROKE STITCH (figs. 337, 338, 339,
340).—This tasteful little table-cover provides excellent practice in working two sided, square stitch. The square represented in fig. 339, forms the middle of the cloth. The Gobelin stitches, set very closely, unite and form a star in the centre of the principal subject.
They begin in the corners, in red and continue in green, violet and blue, successively; the little branches in stroke stitch, on each side of the Gobelin stitches, correspond with them in colour, and the small figures, that form the border of the square, may be worked, indiscriminately, in any of the colours used for the Gobelin stitches of the centre. Four branches run inwards from the corners of the square, and four more advance to meet, and pass them, from the inner angles of the wide border. Four figures, copied from the outside border, fig.
339, and worked in yellow, and the little star, fig. 337, besides the little subjects, borrowed from the outside border, fig. 338, are strewn lightly over the foundation, interspersed between the branches. In fig. 340, nevertheless, which represents the whole table-cover, the edge is formed of the small subjects contained in the wide border and not of the little stars. The Gobelin stitches in the centre of fig. 337, are in dark green, the star stitches and the stroke stitches on the outside in red.
The wide border consists of stars, every other row of which, is worked in red; the intermediate rows, successively, in blue, green, and yellow. The corners are composed of four detached stars, framed by a row of stroke stitches, one red and one blue, alternately. This line skirts both sides of the border, and forms the base to the quaint figures, that terminate the design and which can be worked in all the colours used for the inside.
[Illustration: FIG. 337. SMALL DETACHED SUBJECT OF FIG. 340.]
[Illustration: FIG. 338. OUTER BORDER OF FIG. 340.]
[Illustration: FIG. 339. MIDDLE OF FIG. 340.]
The original of our illustration, which is on fine Rhodes linen, in Coton à broder D.M.C No. 25, is only a small table-cover; for a larger one, if you wish strictly to adhere to the pattern, Java or Ceylon linen will be the best material to select, with Coton à tricoter D.M.C No. 12, for the stroke stitches and Coton à repriser No. 25 for the Gobelin stitches.
[Illustration: FIG. 340. TABLE-COVER IN GOBELIN AND STROKE STITCH.
MATERIALS.—According to the stuff: Coton à tricoter D.M.C Nos. 6 to 16, Coton à broder D.M.C Nos. 16 to 35, Coton à repriser D.M.C Nos. 12, 25, 50, Fil à pointer D.M.C Nos. 10 to 30, or Cordonnet 6 fils D.M.C Nos. 3 to 20.[A] COLOURS: Rouge-Cornouille 450, Vert-Pistache 319, Violet-Lie-de-vin 372, Jaune-Rouille 364, Bleu-Indigo 322.[A]]
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: INSERTION—PLAIN STITCHES AND OVERS]
Knitting.
Knitting is one of the earliest forms of needlework, and one, which has been carried to the highest perfection. It would be difficult to invent new stitches or patterns and, we shall therefore confine ourselves to describing the stitches in general use, and reproducing those of the old patterns we consider the most useful, that our readers may make their own selection.
In former days, knitting served mainly for the manufacture of stockings, and even now, in spite of machines, hand-knit stockings, and numberless other useful and ornamental articles, such as shawls, counterpanes, cradle-coverings, gloves, laces etc. are in great request.
Besides its practical use, knitting is an easy and pleasant pastime that can be taken up at odd minutes and even carried on, whilst talking, or reading.
Knitting consists of loops, or stitches, as they are generally called, formed by means
Edition notice Project Gutenberg source, credits & licence
The reading text above is the public-domain work. The Project Gutenberg header, production credits and licence are kept here as provenance rather than shown before the book.
Front matter as received (title page, contents)
ENCYCLOPEDIA
OF
NEEDLEWORK
BY
THÉRÈSE DE DILLMONT
[Illustration]
_ENGLISH EDITION_
* * * * *
ALL RIGHTS RESERVED
_To be had:_
_of TH. DE DILLMONT, DORNACH, Alsace, and at all booksellers, and
embroidery shops._
* * * * *
Price, English bound with gilt edges:
English edition Sh. 3.—
French edition Fr. 5.75
German edition Mk. 3.—
Preface.
The absolute want of any comprehensive book on needlework—such an one
as contains both verbal and pictorial descriptions of everything
included under the name of needlework—has led me to put into the
serviceable form of an Encyclopedia, all the knowledge and experience,
which years of unceasing study and practice have enabled me to
accumulate on the subject, with the hope that diligent female workers of
all ages, may be able, by its means to instruct themselves in every
branch of plain and fancy needlework.
All the patterns given, even the most insignificant, were worked afresh
for the purpose, and thus, not merely faithful representations, but also
lucid and intelligible explanations of the same, are secured.
In order that my readers may have something besides the dull theory, the
work is enlivened by a number of useful patterns, some new, some derived
from the artistic productions of such countries and epochs as have
become famous by special excellence in the domain of needlework.
Though, at first sight, the reproduction of many of these patterns may
seem to present insuperable difficulties, they will, after a careful
study of the text, and exact attention to the directions given, prove
easy to carry out.
Many of these interesting designs are drawn from private collections,
whose owners, with great kindness, placed their treasures at my
disposal, to copy and borrow from at discretion, for which I desire to
take the present opportunity, of tendering them my warmest thanks.
The choice of colours and material—a difficult matter to many—my
readers will find rendered comparatively easy to them by the notes
affixed to the illustrations; and I may point out, that most of the
patterns were worked with D.M.C cottons, which enjoy the well-earned
reputation of being, the very best of their kind, in the market of the
world.
Experience has convinced me that, in many instances, these cottons may
with advantage take the place of wool, linen thread, and even silk.
If this work meet with indulgent judges, and prove really useful, I
shall find ample reward in that fact for the trouble and difficulties
that have unavoidably attended its completion.
[Illustration: STRIPE SHOWING RUNNING, STITCHING, BUTTON-HOLING, AND
HERRING-BONING.]
Plain Sewing.
Many, on opening the Encyclopedia of needlework will be disposed to
exclaim as they read the heading of this first section: What is the use
of describing all the old well-known stitches, when machines have so
nearly superseded the slower process of hand-sewing? To this our reply
is that, of all kinds of needlework, Plain Sewing needs to be most
thoroughly learned, as being the foundation of all. Those who are able
to employ others to work for them, should at least know how to
distinguish good work from bad, and those who are in less fortunate
circumstances, have to be taught how to work for themselves.
POSITION OF THE BODY AND HANDS.—Before describing different kinds of
stitches, a word should be said as to the position of the body and hands
when at work. Long experience has convinced me that no kind of
needlework necessitates a stooping or cramped attitude. To obviate
which, see that your chair and table suit each other in height, and that
you so hold your work as hardly to need to bend your head at all. The
practice of fastening the work to the knee, besides being ungraceful, is
injurious to the health.
NEEDLES.—These should be of the best quality. To test a needle, try
to break it; if it resist, and then break clean in two, the steel is
good; if it bend without breaking, or break without any resistance, it
is bad. Never use a bent needle, it makes ugly and irregular stitches,
and see that the eye, whether round or egg-shaped, be well-drilled, that
it may not fray or cut the thread. Long or half-long needles are the
best for white work, long ones for dress-making, and longer ones still,
with long eyes, for darning. A stock of each, from No 5 to 12, is
advised. The needle should always be a little thicker than the thread,
to make an easy passage for it through the stuff.
To keep needles from rusting, strew a little stone alum in the packets,
and workers whose hands are apt to get damp, should have a small box of
it handy, to powder their fingers with. Blackened needles can be made
quite bright again by drawing them through an emery cushion.
SCISSORS.—Scissors are a very important accessory of the work-table,
and two varieties are indispensable; a pair of large ones for
cutting-out, with one point blunt and the other sharp, the latter to be
always held downwards; and a pair of smaller ones with two sharp points.
The handles should be large and round; if at all tight, they tire and
disfigure the hand.
THIMBLE.—Steel thimbles are the best; bone are very liable to break,
and silver ones are not deeply enough pitted, to hold the needle. A
thimble should be light, with a rounded top and flat rim.
THE THREAD.—Except for tacking, your thread should never be more than
from 40 to 50 c/m. long.[1] If the thread is in skeins, it does not
matter which end you begin with, but if you use reeled cotton, thread
your needle with the end that points to the reel, when you cut it; as
the other end will split, and unravel, when twisted from left to right,
which is generally done, to facilitate the process of threading. The
cotton should always be cut, as it is weakened by breaking.
KNOTTING THE THREAD INTO THE NEEDLE (fig. 1).—When the thread becomes
inconveniently short, and you do not want take a fresh one, it may be
knotted into the needle, thus: bring it round the forefinger close to
the needle, cross it on the inside next to the finger, hold the crossed
threads fast, with the thumb draw the needle out through the loop thus
formed, and tighten the loop round both ends.
[Illustration: FIG. 1. KNOTTING THE THREAD INTO THE NEEDLE.]
MATERIALS.—For tacking, use Coton à coudre D.M.C qualité supérieure
(black and gold stamp) Nos. 2 to 6.[A] For hand-sewing, Fil d’Alsace
D.M.C Nos. 30 to 700,[A] and Fil à dentelle D.M.C, balls or reels, Nos.
25 to 100[A] will be found most useful. For machine-work: Câblé 6 fils
pour machines D.M.C, Nos. 30 to 300,[A] black and white, or white and
blue stamp. These can also be used for hand-work. Both these and the
lace-thread (Fil à dentelle) on reels, are superfine in quality. The
medium sizes are the most useful; but the only suitable ones for very
fine and delicate fabrics are the Fil à dentelle D.M.C, and Fil
d’Alsace, and the latter only is manufactured in the higher numbers.
All these threads are to be had, wound in balls, or on reels, the buyer
may make his own choice; balls are apt to get tangled, but the cotton
preserves its roundness better than when it is wound on reels. Linen is
generally sewn with linen-thread, but Fil à dentelle and the Fil
d’Alsace are very good substitutes.
POSITION OF THE HANDS (fig. 2).—The stuff, fastened to a cushion,
must be held with the left hand, which should neither rest on the table,
nor on the cushion, the needle must be held between the thumb and
forefinger, of the right hand, and the middle finger, armed with the
thimble, pushes the needle far enough through the stuff, for the other
fingers to take hold of it and draw it out; the thread then comes to lie
between the fourth and fifth fingers in the form of a loop, which must
be tightened gradually to avoid its knotting.
[Illustration: FIG. 2. POSITION OF THE HANDS.]
POSITION OF THE HANDS WITHOUT CUSHION (fig. 3).—When the work cannot
be fastened to a cushion it should be held between the forefinger and
the thumb, and left hanging down, over the other fingers. If it need to
be more firmly held, draw it between the fourth and fifth fingers, which
will prevent it from getting puckered or dragged.
[Illustration: FIG. 3. POSITION OF THE HANDS WITHOUT CUSHION.]
STITCHES.—Plain-Sewing comprises 4 varieties of stitches, (1)
running, (2) back-stitching, (3) hemming and (4) top or over-sewing.
(1) RUNNING-STITCH (fig. 4).—This is the simplest and easiest of all.
Pass the needle in and out of the material, at regular intervals, in a
horizontal direction, taking up three or four threads at a time. If the
stuff allow, several stitches may be taken on the needle at once, before
the thread is drawn out. Running-stitch is used for plain seams, for
joining light materials, for making gathers and for hems.
[Illustration: FIG. 4. RUNNING-STITCH.]
(2) BACK-STITCH (fig. 5).—Insert the needle, and draw it out six
threads further on, carry your thread back, from left to right, and
insert the needle three threads back from the point at which it was last
drawn out, and bring it out six threads beyond. Stitching and
back-stitching are better and more quickly done by machine than by hand.
[Illustration: FIG. 5. BACK-STITCH.]
STITCHING (fig. 6).—The production of a row of back-stitches, that
exactly meet one another, constitutes what is called stitching. Only one
stitch can be made at a time, and the needle must be put in, exactly at
the point where it was drawn out to form the preceding back-stitch, and
brought out as many threads further on as were covered by the last
back-stitch. The beauty of stitching depends on the uniform length of
the stitches, and the straightness of the line formed, to ensure which
it is necessary to count the threads for each stitch, and to draw a
thread to mark the line. If you have to stitch in a slanting line across
the stuff, or the stuff be such as to render the drawing of a thread
impossible, a coloured tacking thread should be run in first, to as a
guide.
[Illustration: FIG. 6. STITCHING.]
STITCHED HEM (fig. 7).—Make a double turning, as for a hem, draw a
thread two or three threads above the edge of the first turning, and do
your stitching through all three layers of stuff; the right side will be
that on which you form your stitches.
[Illustration: FIG. 7. STITCHED HEM.]
(3) HEMMING-STITCH (fig. 8).—To make a good hem, your stuff must be
cut in the line of the thread. Highly dressed stuffs, such as linen and
calico; should be rubbed in the hand, to soften them, before the hem is
laid. Your first turning should not be more than 2 m/m. wide; turn down
the whole length of your hem, and then make the second turning of the
same width, so that the raw edge is enclosed between two layers of
stuff.
[Illustration: FIG. 8. HEMMING-STITCH.]
Narrow hems do not need to be tacked, but wide ones, where the first
turning should only be just wide enough to prevent the edge from
fraying, ought always to be. In hemming you insert the needle and
thread directed in a slanting position towards you, just below the edge
of the hem, and push it out two threads above, and so on to the end,
setting the stitches, two or three threads apart, in a continuous
straight line. To ensure the hem being straight, a thread may be drawn
to mark the line for the second turning, but it is not a good plan,
especially in shirt-making, as the edge of the stuff, too apt in any
case, to cut and fray, is, thereby, still further weakened. Hems in
woollen materials, which will not take a bend, can only be laid and
tacked, bit by bit. In making, what are called rolled hems, the needle
must be slipped in, so as only to pierce the first turning, in order
that the stitches may not be visible on the outside.
FLAT SEAM (fig. 9).—Lay your two edges, whether straight or slanting,
exactly even, tack them together with stitches 2 c/m. long, distant 1 to
2 c/m. from the edge, and then back-stitch them by machine or by hand,
following the tacking-thread. Cut off half the inner edge, turn the
outer one in, as for a hem and sew it down with hemming-stitches.
[Illustration: FIG. 9. FLAT SEAM.]
Smooth the seam underneath with the forefinger as you go, to make it lie
quite flat. Beginners should flatten down the seam with their thimbles,
or with the handle of the scissors, before they begin to hem, as the
outer and wider edge is very apt to get pushed up and bulge over, in the
sewing, which hides the stitches.
ROUNDED SEAM.—Back-stitch your two edges together, as above directed,
then cut off the inner edge to a width of four threads, and roll the
outer one in, with the left thumb, till the raw edge is quite hidden,
hemming as you roll. This kind of seam, on the wrong side, looks like a
fine cord, laid on, and is used in making the finer qualities of
underclothing.
FASTENING THREADS OFF, AND ON (fig. 10).—Knots should be avoided in
white work. To fasten on, in hemming, turn the needle backwards with the
point up, take one stitch, and stroke and work the end of the thread in,
underneath the turning. To fasten on, in back-stitching or running,
make one stitch with the new thread, then take both ends and lay them
down together to the left, and work over them, so that they wind in, and
out of the next few stitches.
[Illustration: FIG. 10. FASTENING THREADS OFF AND ON.]
(4) TOP OR OVER-SEWING STITCH (fig. 11).—This stitch is used for
joining selvedges together. To keep the two pieces even, it is better,
either to tack or pin them together first. Insert the needle, from right
to left, under the first thread of the selvedge, and through both edges,
and sew from right to left, setting your stitches not more than three
threads apart. The thread must not be drawn too tightly, so that when
the seam is finished and flattened with the thimble, the selvedges may
lie, side by side.
[Illustration: FIG. 11. TOP OR OVER-SEWING STITCH.]
ANOTHER KIND OF SEWING-STITCH (fig. 12)—For dress-seams and patching;
sew left to right, tacking or pinning the edges together first, and
holding them tightly with the thumb and finger, to keep perfectly even.
[Illustration: FIG. 12. ANOTHER KIND OF SEWING-STITCH.]
ANTIQUE OR OLD-GERMAN SEAM (figs. 13 and 14).—Tack or pin the
selvedges together as above, then, pointing your needle upwards from
below, insert it, two threads from the selvedge, first on the wrong
side, then on the right, first through one selvedge, then through the
other, setting the stitches two threads apart. In this manner, the
thread crosses itself, between the two selvedges, and a perfectly flat
seam is produced. Seams of this kind occur in old embroidered linen
articles, where the stuff was too narrow to allow for any other. A
similar stitch, fig. 14, only slanting, instead of quite straight, as in
fig. 13, is used in making sheets.
[Illustration: FIG. 13. ANTIQUE OR OLD-GERMAN SEAM.]
[Illustration: FIG. 14. ANTIQUE OR OLD GERMAN SEAM.]
FRENCH DOUBLE SEAM (fig. 15).—For joining such stuffs as fray, use
the so-called French-seam.
[Illustration: FIG. 15. FRENCH DOUBLE-SEAM.]
Run your two pieces of stuff together, the wrong sides touching, and the
edges perfectly even, then turn them round just at the seam, so that the
right sides come together inside, and the two raw edges are enclosed
between, and run them together again. See that no threads are visible on
the outside. This seam is used chiefly in dress-making, for joining
slight materials together which cannot be kept from fraying by any other
means.
HEMMED DOUBLE SEAM (figs. 16 and 17).—Turn in the two raw edges, and
lay them one upon the other, so that the one next the forefinger, lies
slightly higher than the one next the thumb. Insert the needle, not
upwards from below but first into the upper edge, and then, slightly
slanting, into the lower one. This seam is used in dress-making, for
fastening down linings. Fig. 17 shows another kind of double seam, where
the two edges are laid together, turned in twice, and hemmed in the
ordinary manner, with the sole difference, that the needle has to pass
through a sixfold layer of stuff.
[Illustration: FIG. 16. HEMMED DOUBLE-SEAM.]
[Illustration: FIG. 17. OPEN HEMMED DOUBLE-SEAM.]
GATHERING (fig. 18).—Gathers are made with running-stitches of
perfectly equal length; take up and leave three or four threads,
alternately, and instead of holding the stuff fast with your thumb, push
it on to the needle as you go, and draw up your thread after every four
or five stitches.
[Illustration: FIG. 18. GATHERING.]
STROKING GATHERS (fig. 19).—When you have run in your gathering
thread, draw it up tight, and make it fast round the finger of your left
hand, and then stroke down the gathers with a strong needle, so that
they lie evenly side by side, pushing each gather, in stroking it, under
your left thumb, whilst you support the stuff at the back with your
other fingers.
[Illustration: FIG. 19. STROKING GATHERS.]
RUNNING IN A SECOND GATHERING THREAD (fig. 20).—This is to fix the
gathers after they have been stroked, and should be run in 1 or 2 c/m.
below the first thread, according to the kind of stuff, and the purpose
it is intended for: take up five or six gathers at a time, and draw your
two threads perfectly even, that the gathers may be straight to the line
of the thread.
[Illustration: FIG. 20. RUNNING IN A SECOND GATHERING-THREAD.]
SEWING ON GATHERS (fig. 21).—To distribute the fullness equally,
divide the gathered portion of material, and the band, or plain piece,
on to which it is to be sewn, into equal parts, and pin the two together
at corresponding distances, the gathered portion under the plain, and
hem each gather to the band or plain piece, sloping the needle to make
the thread slant, and slipping it through the upper threads only of the
gathers.
[Illustration: FIG. 21. SEWING ON GATHERS.]
WHIPPING (fig. 22).—Whipping is another form of gathering, used for
fine materials. With the thumb and forefinger of the left hand, roll the
edge over towards you, into a very tight thin roll, insert the needle on
the inside of the roll next the thumb, and bring it out on the outside
next the forefinger, at very regular distances, and draw up the thread
slightly, from time to time, to form the gathers.
[Illustration: FIG. 22. WHIPPING.]
ORNAMENTAL HEM (fig. 23). For an ornamental hem, make a turning, 2 or
3 c/m. deep, and run in a thread, with small running-stitches up and
down, as shown in fig. 23. By slightly drawing the thread, the straight
edge will be made to look as if it were scalloped.
[Illustration: FIG. 23. ORNAMENTAL HEM.]
SEWING ON CORD (fig. 24).—For sewing on cord, use strong thread,
either Fil d’Alsace D.M.C, Fil à dentelle D.M.C or Câblé 6 fils D.M.C
No. 25, 30, 35 or 40.[A] Be careful not to stretch the cord, but to hold
it in, as you sew it, as it invariably shrinks more than the stuff in
the first washing. Fasten it with hemming stitches to the edge of the
turning, taking care that it does not get twisted.
[Illustration: FIG. 24. SEWING ON CORD.]
SEWING ON FLAPS (fig. 25).—These should be back-stitched on to the
right side of the article they are to be affixed to, quite close to the
edge, then folded over in half, and hemmed down on the wrong side. Like
the cord, the flap must, in the process, be held in very firmly with the
left hand. Though the back-stitching could be more quickly done by
machine, hand-work is here preferable, as the holding in cannot be done
by machine.
[Illustration: FIG. 25. SEWING ON FLAPS.]
SEWING ON TAPE-LOOPS (figs. 26 and 27).—These, in the case of the
coarser articles of household linen, are generally fastened to the
corners. Lay the ends of your piece of tape, which should be from 15 to
17 c/m. long, side by side, turn in and hem them down, on three sides:
the loop should be so folded as to form a three-cornered point, shewn in
the illustration. Join the two edges of the tape together in the middle
with a few cross-stitches, and stitch the edge of the hem of the article
to the loop, on the right side.
[Illustration: FIG. 26. SEWING ON TAPE-LOOPS TO THE CORNER.]
[Illustration: FIG. 27. SEWING ON TAPE-LOOPS IN THE MIDDLE OF THE
ARTICLE.]
Fig. 27 shows how to sew on a loop in the middle of an article, the two
ends separately, one on one side, the other on the other.
STRINGS AND LOOPS FOR FINE UNDER-LINEN (fig. 28).—Sew these on,
likewise, on the wrong side of the article, hemming down the ends, and
fastening them on the right side, with two rows of stitching crossing
each other, and a third row along the edge.
[Illustration: FIG. 28. STRINGS AND LOOPS ON FINE UNDER-LINEN.]
BUTTON-HOLES IN LINEN (fig. 29).—Cut your hole perfectly straight,
and of exactly, the diameter of the button, having previously marked
out the place for it, with two rows of running-stitches, two or three
threads apart. Put in your needle at the back of the slit, and take up
about three threads, bring the working thread round, from right to left
under the point of the needle, and draw the needle out through the loop,
so that the little knot comes at the edge of the slit, and so on to the
end, working from the lower left-hand corner to the right. Then make a
bar of button-hole stitching across each end, the knotted edge towards
the slit.
[Illustration: FIG. 29. BUTTON-HOLES IN LINEN.]
BUTTON HOLES IN DRESS MATERIALS (fig. 30).—Mark out and cut them as
above described; if however, the material be liable to fray, wet the
slit as soon as you have cut it, with liquid gum, and lay a strand of
strong thread along the edge to make your stitches over; one end of
dress button-holes must be round, the stitches diverging like rays from
the centre, and when you have worked the second side, thread the needle
with the loose strand, and pull it slightly, to straighten the edges;
then fasten off, and close the button-hole with a straight bar of
stitches across the other end, as in fig. 29.
[Illustration: FIG. 30. BUTTON-HOLES IN DRESS-MATERIALS.]
SEWING ON BUTTONS (figs. 31 and 32).—To sew linen, or webbed buttons
on to underclothing, fasten in your thread with a stitch or two, at the
place where the button is to be; bring the needle out through the middle
of the button, and make eight stitches, diverging from the centre like a
star, and if you like, encircle them by a row of stitching, as in fig.
32. This done, bring the needle out between the stuff and the button,
and twist the cotton six or seven times round it, then push the needle
through to the wrong side, and fasten off.
[Illustration: FIG. 31. SEWING ON LINEN BUTTONS.]
[Illustration: FIG. 32. SEWING ON WEBBED BUTTONS.]
BINDING SLITS (figs. 33, 34, 35, 36).—Nothing is more apt to tear
than a slit whether it be hemmed or merely bound. To prevent this, make
a semicircle of button-hole stitches at the bottom of the slit, and
above that, to connect the two sides, a bridge of several threads,
covered with button-hole stitches.
[Illustration: FIG. 33. BINDING SLITS WITH HEM.]
[Illustration: FIG. 34. BINDING SLITS WITH PIECE ON CROSS.]
[Illustration: FIG. 35. BINDING SLITS WITH BROAD BAND.]
[Illustration: FIG. 36. STRENGTHENING SLITS WITH GUSSET.]
In fig. 33, we show a hemmed slit, and in figs. 34 and 35, are two slits
backed the one with a narrow, the other, with a broad piece of the
material, cut on the cross.
In under-linen, it often so happens that two selvedges meet at the slit,
which renders binding unnecessary; in that case take a small square of
stuff, turn in the raw edges, top-sew it into the slit on two sides,
turn in the other two, fold over on the bias, and hem them down over the
top-sewing, as shewn in fig. 36. Such little squares of material,
inserted into a slit or seam, to prevent its tearing, are called
gussets.
SEWING ON PIPING (fig. 37). Piping is a border, consisting of a cord or
bobbin, folded into a stripe of material, cut on the cross, and affixed
to the edge of an article to give it more strength and finish. It is a
good substitute for a hem or binding on a bias edge, which by means of
the cord, can be held in, and prevented from stretching. Cut your
stripes diagonally, across the web of the stuff, and very even; run them
together, lay the cord or bobbin along the stripe, on the wrong side, 5
m/m. from the edge, fold the edge over, and tack the cord lightly in.
Then lay it on the raw edge of the article, with the cord towards you,
and with all the raw edges turned away from you. Back-stitch the piping
to the edge, keeping close to the cord. Then turn the article round,
fold in the raw outside edge over the others, and hem it down like an
ordinary hem.
[Illustration: FIG. 37. SEWING ON PIPING.]
FIXING WHALE-BONES (fig. 38).—Before slipping the whalebone into its
case or fold of stuff, pierce holes in it, top and bottom, with a red
hot stiletto. Through these holes, make your stitches, diverging like
rays or crossing each other as shown in fig. 38.
[Illustration: FIG. 38. FIXING WHALE-BONES.]
HERRING-BONING (fig. 39).—This stitch is chiefly used for seams in
flannel, and for overcasting dress-seams, and takes the place of
hemming, for fastening down the raw edges of a seam that has been run or
stitched, without turning them in. Herring-boning is done from left to
right, and forms two rows of stitches. Insert the needle from right to
left, and make a stitch first above, and then below the edge, the
threads crossing each other diagonally, as shewn in fig. 39.
[Illustration: FIG. 39. HERRING-BONING]
FOOTNOTES:
[1] Our readers should be provided with a French metre, with the English
yard marked on the back for purposes of comparison.
[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: SPECIMENS OF PATTERN DARNS.]
Mending.
The mending of wearing-apparel and house-linen, though often an
ungrateful task, is yet a very necessary one, to which every female hand
ought to be carefully trained. How best to disguise and repair the wear
and tear of use or accident is quite as valuable an art, as that of
making new things.
Under the head of mending, we include the strengthening and replacing of
the worn and broken threads of a fabric, and fitting in of new stuff in
the place of that which is torn or damaged. The former is called
darning, the latter, patching.
DARNING.—When only a few of the warp or woof threads are torn or
missing, a darn will repair the mischief, provided the surrounding parts
be sound. When the damage is more extensive, the piece must be cut out.
In some cases the warp of the stuff itself can be used for darning,
otherwise thread as much like the stuff as possible should be chosen.
MATERIALS SUITABLE FOR MENDING.—Coton à repriser D.M.C is used for
most kinds of darning. It can be had in 18 different sizes, from Nos. 8
to 100, white and unbleached, and in all the colours of the D.M.C
colour-card in Nos. 12, 25 and 50.
It is but very slightly twisted and can be split or used double, if
necessary, according to the material. For all the coarser articles of
house-linen, unbleached cotton is the best, and for the finer white
fabrics, Coton surfin D.M.C Nos. 110, 120 and 150[A]. This cotton, which
is not the least twisted, and is to be had both white and unbleached,
can be used, by subdividing it, for darning the finest cambric.
VARIETIES OF DARNING.—These are four, (1) Linen darning, (2) Damask
darning, (3) Satin or Twill darning, and (4) Invisible darning, called
also, Fine-drawing.
(1) LINEN DARNING (figs. 40 and 41).—All darns should be made on the
wrong side of the stuff, excepting fig. 54, which it is sometimes better
to make on the right side. The longitudinal running, to form the warp,
must be made first. The thread must not be drawn tightly in running your
stitches backwards and forwards, and be careful to leave loops at each
turning, to allow for the shrinking of the thread in the washing,
without its pulling the darn together.
[Illustration: FIG. 40. LINEN DARNING. DRAWING IN THE WARP THREADS.]
[Illustration: FIG. 41. LINEN DARNING. DRAWING IN THE WOOF THREADS.]
Run your needle in, about one c/m. above the damaged part, take up one
or two threads of the stuff and miss the same number, working straight
to a thread; on reaching the hole, carry your cotton straight across it,
take up alternate threads beyond, and proceed as before. Continue the
rows backwards and forwards, taking up in each row, the threads left in
the preceding one. Turn the work round and do the same for the woof;
alternately taking up and leaving the warp threads, where the cotton
crosses the hole. The threads must lie so alone both ways, that the
darn, when completed, replaces the original web. The threads are only
drawn so far apart in the illustrations, for the sake of clearness.
When the material to be darned does not admit of a fleecy thread, such
as Coton à repriser D.M.C, one that as nearly as possible matches the
material, should be chosen from the D.M.C cottons.[A]
DIAGONAL LINEN DARNING (fig. 42).—Darns are sometimes begun from the
corner, so as to form a diagonal web, but they are then much more
visible than when they are worked straight to a thread, and therefore
not advisable.
[Illustration: FIG. 42. DIAGONAL LINEN DARNING.]
(2) SATIN OR TWILL DARNING (fig. 43).—By twill darning, the damaged
web of any twilled or diagonal material can be restored. It would be
impossible to enumerate all the varieties of twilled stuffs, but the
illustrations and accompanying directions will enable the worker to
imitate them all.
[Illustration: FIG. 43. SATIN OR TWILL DARNING.]
Begin, as in ordinary darning by running in the warp threads, then take
up one thread, and miss three. In every succeeding row, advance one
thread in the same direction. Or, miss one thread of the stuff and take
up two, and as before, advance, one thread in the same direction, every
succeeding row. The order in which threads should be missed and taken
up, must depend on the web which the darn is intended to imitate.
When the original is a coloured stuff, it is advisable to make a
specimen darn first, on a larger scale, so that you may be more sure of
obtaining a correct copy of the original web.
(3) DAMASK DARNING (figs. 44, 45, 46, 47, 48, 49).—A damask darn is
begun in the same way as all other darns are; the pattern is formed by
the cross-runnings and will vary with the number of warp threads taken
up and missed, in each successive running. The woven design which you
are to copy with your needle must therefore be carefully examined first.
Figs. 44 and 45 show the wrong and right sides of a damask darn, in
process of being made.
[Illustration: FIG. 44. DAMASK DARNING. WRONG SIDE.]
[Illustration: FIG. 45. DAMASK DARNING. RIGHT SIDE.]
Fig. 46 represents a completed one. In the case of coloured webs, a
light shade of cotton is generally used for the warp, one that matches
the stuff, for the shot or woof.
[Illustration: FIG. 46. DAMASK DARNING. COVERED GROUND.]
Figs. 47 and 48, illustrate two specimens of darning, formerly done in
the convents, from which it will be seen, that the warp and the woof
were first drawn in with rather fine thread and the pattern then worked
into this foundation with coarser, or else, coloured thread. When this
kind of darn is in two colours, take, for the darker shade, Coton à
broder D.M.C, or Coton à repriser D.M.C, which are both of them to be
had in all the bright and faded shades, to match alike both old and new
linen.
[Illustration: FIG. 47. DAMASK DARNING ON NEEDLE-MADE GROUND.]
[Illustration: FIG. 48. DAMASK DARNING ON NEEDLE-MADE GROUND.]
Fig. 49, which is executed in two colours, and is likewise copied from
an old work on darning, shows you the manner in which a dice-pattern is
to be reproduced.
[Illustration: FIG. 49. DAMASK DARNING WITH COLOURED THREAD.]
(4) DARNING, LOST IN THE GROUND (fig. 50).—A kind of darn used for
repairing rents, the edges of which fit exactly into one another.
Neither the torn threads of the material nor the rough edges must be cut
off; the torn part is to be tacked upon a piece of oil-cloth, wrong side
uppermost, and the edges, drawn together by a thread, run in backwards,
and forwards, across them. The stitches must be set as closely together
as possible, and regularly inverted, as in every other darn. A much
finer thread relatively than that of which the material is composed
should, in all cases be used for darning. In this instance also, for the
sake of greater distinctness, the size of the thread has been magnified
in the illustration. Coton surfin D.M.C, will be found the best for
darning both calico and linen.
[Illustration: FIG. 50. DARNING LOST IN THE GROUND.]
FINE DRAWING (fig. 51).—The art of making invisible darns in cloth,
though such a useful one, is all but unknown. It is a tedious process
and one which, though easy enough to understand, requires great care in
the execution.
[Illustration: FIG. 51. FINE DRAWING.]
Use as fine a needle as possible and thread it with hair, instead of
silk, or any other kind of fibre. Red and white hair is the strongest,
and stronger than the ravellings of the stuff. Of course the hair has
first to be carefully cleansed from grease. Pare the edges of the rent,
on the right sides, quite clean and even, with a razor, so that both
rent and stitches may be lost in the hairy surface of the cloth.
Scissors do not cut so closely, and are liable moreover, to disturb the
nap, and render the darn more visible. When this is done, fit the edges
exactly together, and overcast them. Then thread a needle with a hair by
the root, and slip it in, 2 or 3 m/m. from the one edge and back again
pointed towards you, through the other, so that, neither needle nor
hair, are visible on either side. The stitches should be set slightly
slanting and must be quite lost in the thickness of the cloth. The
needle must always be put in, exactly at the place where it came out,
and the hair not be too tightly drawn.
When the darn is finished, lay the article on a bare table, or
ironing-board, cover it with a damp cloth, and iron it. The sharpest eye
will fail to detect a rent, when carefully darned in this manner.
PATCHING.—As we have already said, when the defective part is past
darning, it must be cut out, and a new piece of stuff inserted in its
place. If the garment be no longer new, it should be patched with a
slighter material than that of which it was originally made. The patch
should be of the same shape, and cut the same way of the stuff, as the
piece it is to replace, it should also be, just so much larger, as to
allow for the turnings in, and can either be top-sewn, or else, run and
felled in.
BACK-STITCHING AND FELLING IN A PATCH (fig. 52).—Tack in the new
piece, so that its edges overlap the edges of the hole. The
back-stitching must be done on the article itself, as this renders it
easier to do the corners neatly. The hem is turned down on to the patch.
Make a little snip at the corners with your scissors to prevent
puckering. The back-stitching should form a right angle at each corner.
[Illustration: FIG. 52. BACK-STITCHING AND FELLING IN A PATCH.]
TOP-SEWING IN A PATCH (fig. 53).—To do this, the edges of the hole
and of the patch, must first be turned in, and either overcast or
hemmed, to prevent their fraying, after which, sew the two edges
together. The raw edges may also be turned in with herring-boning as in
fig. 39, putting the needle, only through one layer of stuff.
[Illustration: FIG. 53. TOP-SEWING IN A PATCH.]
DRAWING IN A PATCH (fig. 54).—Take a square piece of the original
stuff, 5 or 6 c/m. larger each way, than the hole it is to fill, draw
out threads on all the four sides, till the piece exactly matches the
hole, and tack it into its place. Thread a very fine needle with the two
ends of a thread of silk or Fil d’Alsace D.M.C No. 700, run it in at the
corner of the stuff, and draw it out, leaving a loop behind. Into this
loop, slip the first of the threads, which as it were, form a fringe to
the patch, and tighten the loop round it, and so on with each thread,
alternately taking up and leaving threads in the stuff, as in ordinary
darning.
[Illustration: FIG. 54. DRAWING IN A PATCH.]
To put a patch into a thin material, in this manner, you must darn in
the threads, a good long way, into the material, in order that the
double layer of threads may be less visible.
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: STRIPE OF CUT OPEN-WORK ON WHITE LINEN.]
Single and cut Open-work.
The above heading comprises every sort of needle-work, to which the
drawing out of threads is a preliminary. By sewing over the single
threads that remain, and drawing them together in different ways, an
infinite variety of patterns can be produced. Many pretty combinations
also, can be made of open-work, cross-stitch, and other kinds of
embroidery.
MATERIALS SUITABLE FOR OPEN-WORK.—For all the coarser stuffs, such as
Holbein-linen, Java and linen-canvas and the like, now in such favour
for the imitation of old needlework, it will be best to use: Fil à
pointer D.M.C, No. 30[A] and Cordonnet 6 fils D.M.C, Nos. 10 to 20,[A]
and for the finer stuffs, such as antique-linen and linen-gauze;
Cordonnet 6 fils D.M.C Nos. 50 to 150,[A] Fil d’Alsace D.M.C, Nos. 20 to
100, and Fil à dentelle D.M.C, Nos. 25 to 80.
Coloured patterns can also be executed in open-work, with Coton à broder
D.M.C Nos. 16 to 35, and Coton à repriser D.M.C, Nos. 25 to 50[A].
THE TWO DIFFERENT KINDS OF OPEN-WORK.—The one is called, single
open-work, the Italian Punto tirato, in which the first step is to draw
out one layer of threads; the other, cut open-work, the Italian Punto
tagliato, for which, both the warp, and the woof threads, have to be
drawn out.
SINGLE OPEN-WORK (PUNTO TIRATO).—This, in its simplest form, is the
ornamental latticed hem, in common use where something rather more
decorative than an ordinary hem (fig. 8) is required, and consists in
drawing out one layer of threads, either the warp or the woof.
SINGLE HEM-STITCH (fig. 55).—Draw out, according to the coarseness of
the stuff, two or four threads, below the edge of the turning, and tack
your hem down to the line thus drawn. Fasten your thread in to the left,
and work your hem from right to left, taking up three or four
cross-threads at a time, and inserting your needle, immediately above,
into the folded hem, three or four threads from the edge, and then
drawing it out.
[Illustration: FIG. 55. SINGLE HEM-STITCH.]
The same stitch is used for preventing the fringes, that serve as a
finish to so many articles of house-linen, from ravelling.
SECOND HEM-STITCH (fig. 56).—Prepare your hem as for fig. 55, and
work from left to right; with this difference, that after drawing two or
three cross-threads together, from right to left, you skip the same
number of perpendicular threads you took up below, and insert your
needle downwards from above, bringing it out at the bottom edge of the
hem.
[Illustration: FIG. 56. SECOND HEM-STITCH.]
These stitches, which can be used for the right side also, form a kind
of little tress, along the edge of the hem.
LADDER STITCH HEM (fig. 57). Complete the hem, as already directed in
fig. 55, then draw out three or five threads more, turn the work round,
and repeat the process, taking up the same clusters of threads which
you took up in the first row of stitches, thus forming little
perpendicular bars.
[Illustration: FIG. 57. LADDER STITCH HEM.]
DOUBLE HEM-STITCH (fig. 58). Begin as in fig. 55, forming your
clusters of an even number of threads; and then, in making your second
row of stitches, draw half the threads of one cluster, and half of the
next together, thereby making them slant, first one way and then the
other.
[Illustration: FIG. 58. DOUBLE HEM-STITCH.]
ANTIQUE HEM-STITCH (figs. 59, 60, 61 and 62). In the old, elaborate,
linen needlework, we often meet two kinds of hem-stitching seldom found
in modern books on needle-work. Figs. 59 to 62 are magnified
representations of the same. At the necessary depth for forming a narrow
hem, a thread is drawn, in the case of very fine textures where the edge
is rolled, not laid; then fasten in the working thread at the left, and
work the stitches from left to right. Passing your needle, from right to
left, under three or four threads, draw the thread round the cluster and
carry your needle on, through as many threads of the upper layer of
stuff, as you took up below, so that the stitch may always emerge from
the middle of the cluster.
[Illustration: FIG. 59. ANTIQUE HEM-STITCH. WRONG SIDE.]
[Illustration: FIG. 60. ANTIQUE HEM-STITCH. RIGHT SIDE.]
ANTIQUE HEM-STITCH (figs. 61 and 62).—These show, the right and
wrong sides of the hem; here the rolled hem is prepared as above, but
the stitches are worked from right to left, and the thread is carried
round the little roll, so that, as shown in fig. 62, it is visible on
both sides of the hem. The needle does not enter the stuff, but is
carried back at once, from the outside, and put in again between two
clusters of threads.
[Illustration: FIG. 61. ANTIQUE HEM-STITCH. WRONG SIDE.]
[Illustration: FIG. 62. ANTIQUE HEM-STITCH. RIGHT SIDE.]
SLANTING HEM-STITCH (figs. 63 and 64).—Bring out your needle and
thread, two or three threads above the edge of the turning, between the
first and second of the three cross-threads that compose the cluster,
and then slip it under the cluster, from right to left. The loop must
lie in front of the needle. When you have drawn up the stitch, put the
needle in, one thread further on, and take up two threads. Fig. 64 shows
the stitch on the right side.
[Illustration: FIG. 63. SLANTING HEM-STITCH. WRONG SIDE.]
[Illustration: FIG. 64. SLANTING HEM-STITCH. RIGHT SIDE.]
DOUBLE-ROWED ORNAMENTAL SEAM (figs. 65, 66, 67).—Begin with any one
of the hems already described, then counting as many threads downwards,
as are clustered together in the first row, draw out a second thread,
and cluster the perpendicular threads in this second line together, as
shown in figs. 65 and 66. On the right side the stitch is straight (fig.
67). Coloured cottons should be used for all the above patterns of
hem-stitch, when they are to be introduced into coloured embroideries.
[Illustration: FIG. 65. DOUBLE-ROWED ORNAMENTAL SEAM. WRONG SIDE.]
[Illustration: FIG. 66. DOUBLE-ROWED ORNAMENTAL SEAM. WRONG SIDE.]
[Illustration: FIG. 67. DOUBLE-ROWED ORNAMENTAL SEAM. RIGHT SIDE.]
SINGLE THREE-ROWED OPEN-WORK (fig. 68).—This, and the following
patterns, are suitable for the headings of hems, and for connecting
stripes of embroidery, and are also often used instead of lace, and lace
insertion.
Fig. 68 will be found specially useful, in cases where the object is, to
produce a good deal of effect, at the cost of as little labour as
possible. Make six rows of hem-stitching, as in fig. 55; the first and
sixth rows to serve as a finish, above and below.
[Illustration: FIG. 68. SINGLE THREE-ROWED OPEN-WORK.]
The second and third, after drawing out six threads, the third and
fourth after drawing out eight. The clusters must all consist of an even
number of threads. The upper and the lower band of open-work is to be
copied from fig. 58, the centre one, from fig. 57. Divide the threads of
the perpendicular clusters in two; insert the needle, from left to
right, underneath half the second cluster, turn the needle’s eye, by a
second movement, from left to right, and take up the second part of the
first cluster, drawing it under, and at the same time, in front of the
first half of the second cluster. Be careful not to draw your thread too
tightly.
OPEN-WORK WITH TWO THREADS DRAWN THROUGH (fig. 69).—One such wide
lane of open-work, between two finishing rows of stitches, may have two
threads drawn through it.
[Illustration: FIG. 69. OPEN-WORK WITH TWO THREADS DRAWN THROUGH.]
OPEN-WORK WITH THREE THREADS DRAWN THROUGH (fig. 70). Overcast both
edges with single stitches; draw the clusters together in the middle, as
in fig. 68; then above and below the middle thread, draw in first one
thread and then a second, straight above it, securing the latter with
back-stitches to enclose the clusters between two threads.
[Illustration: FIG. 70. OPEN-WORK WITH THREE THREADS DRAWN THROUGH.]
CLUSTERED OPEN-WORK (fig. 71).—Draw out from sixteen to eighteen
threads, between two hem-stitched edges. Fasten your thread in, 3 m/m.
above the seam-edge, and wind it three times round every two clusters,
passing the needle, the third time, under the two first rounds, to
fasten the thread. The thread, thus drawn through, must be left rather
slack. A second row of stitches, similar to the first, and at the same
distance from the bottom edge, completes this pattern. To give it
greater strength, you may if you like, work back over the first thread,
with a second, taking care to pass it under the knot, which was formed
by the first.
[Illustration: FIG. 71. CLUSTERED OPEN-WORK.]
DOUBLE-ROWED CLUSTER-OPEN-WORK (fig. 72).—A very good effect can be
obtained by making the above stitch in such a manner, as to form groups
of three clusters each, between hem-stitched bands of the stuff.
[Illustration: FIG. 72. DOUBLE-ROWED CLUSTER-OPEN-WORK.]
TURKISH CLUSTER OPEN-WORK (fig. 73).—After portioning off, and sewing
up the clusters on one side, draw out twelve or fourteen threads, and
make your connecting-stitch and hem, all in one, as follows: bring out
the thread before the cluster, and pass it round it, then from right to
left, over three horizontal and under four perpendicular threads, again
from left to right, over the four threads just passed over, and out at
the second cluster; laying it over this, you bring it out behind the
first cluster, wind it round the middle of them both, and pass it
through, between the overcasting stitches back to the hem; encircle the
second cluster with a loop-stitch, and carry your thread again over
three horizontal and four perpendicular threads, and upwards, slanting
underneath the stuff, out in front of the next cluster.
[Illustration: FIG. 73. TURKISH CLUSTER OPEN-WORK.]
OPEN-WORK WITH DARNING STITCH (fig. 74).—Draw out from eight to
twelve threads, according to the quality of the stuff. Insert your
needle and thread between two clusters, and pass it, as if you were
darning, backwards and forwards over them, until they are encased half
way down with stitches. In so doing, work with the eye of the needle
forward, and the point towards your thimble. To pass to the next
cluster, take one stitch back, under the one just darned, and bring your
thread underneath the threads of the stuff, to the second cluster.
[Illustration: FIG. 74. OPEN-WORK WITH DARNING STITCH.]
OPEN-WORK IN THREE COLOURS (fig. 75).—This pattern which is to be
done in the same way as fig. 74, requires the drawing out of, at least,
eighteen threads. Every cross-line of three clusters is to be worked in
one colour. The colours may all be different, or you may if you prefer,
take shades of the same colour.
[Illustration: FIG. 75. OPEN-WORK IN THREE COLOURS. COLOURS: Bleu-Indigo
311, 322, 334, Brun-Caroubier 354, 303, 357, or Rouge-Géranium 349, 351,Header as received
The Project Gutenberg eBook of Encyclopedia of Needlework
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this eBook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.
Title: Encyclopedia of Needlework
Author: Thérèse de Dillmont
Release date: March 8, 2007 [eBook #20776]
Most recently updated: April 10, 2021
Language: English
Other information and formats: www.gutenberg.org/ebooks/20776
Credits: Produced by Susan Skinner, Julie Barkley, the Online
Distributed Proofreading Team and Richard Tonsing.Full Project Gutenberg licence
Updated editions will replace the previous one—the old editions will
be renamed.
Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for an eBook, except by following
the terms of the trademark license, including paying royalties for use
of the Project Gutenberg trademark. If you do not charge anything for
copies of this eBook, complying with the trademark license is very
easy. You may use this eBook for nearly any purpose such as creation
of derivative works, reports, performances and research. Project
Gutenberg eBooks may be modified and printed and given away—you may
do practically ANYTHING in the United States with eBooks not protected
by U.S. copyright law. Redistribution is subject to the trademark
license, especially commercial redistribution.
START: FULL LICENSE
THE FULL PROJECT GUTENBERG™ LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg™ mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase “Project
Gutenberg”), you agree to comply with all the terms of the Full
Project Gutenberg License available with this file or online at
www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project Gutenberg
electronic works
1.A. By reading or using any part of this Project Gutenberg
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the person
or entity to whom you paid the fee as set forth in paragraph 1.E.8.
1.B. “Project Gutenberg” is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg
electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation (“the
Foundation” or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg mission of promoting
free access to electronic works by freely sharing Project Gutenberg
works in compliance with the terms of this agreement for keeping the
Project Gutenberg name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg License when
you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg work. The Foundation makes no
representations concerning the copyright status of any work in any
country other than the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg License must appear
prominently whenever any copy of a Project Gutenberg work (any work
on which the phrase “Project Gutenberg” appears, or with which the
phrase “Project Gutenberg” is associated) is accessed, displayed,
performed, viewed, copied or distributed:
This eBook is for the use of anyone anywhere in the United States and most
other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg™ License included with this eBook or online
at www.gutenberg.org. If you
are not located in the United States, you will have to check the laws
of the country where you are located before using this eBook.
1.E.2. If an individual Project Gutenberg electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase “Project
Gutenberg” associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg
trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg License for all works
posted with the permission of the copyright holder found at the
beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg.
1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg License.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg work in a format
other than “Plain Vanilla ASCII” or other format used in the official
version posted on the official Project Gutenberg website
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original “Plain
Vanilla ASCII” or other form. Any alternate format must include the
full Project Gutenberg License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg works
unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg electronic works
provided that:
• You pay a royalty fee of 20% of the gross profits you derive from
the use of Project Gutenberg works calculated using the method
you already use to calculate your applicable taxes. The fee is owed
to the owner of the Project Gutenberg trademark, but he has
agreed to donate royalties under this paragraph to the Project
Gutenberg Literary Archive Foundation. Royalty payments must be paid
within 60 days following each date on which you prepare (or are
legally required to prepare) your periodic tax returns. Royalty
payments should be clearly marked as such and sent to the Project
Gutenberg Literary Archive Foundation at the address specified in
Section 4, “Information about donations to the Project Gutenberg
Literary Archive Foundation.”
• You provide a full refund of any money paid by a user who notifies
you in writing (or by e-mail) within 30 days of receipt that s/he
does not agree to the terms of the full Project Gutenberg™
License. You must require such a user to return or destroy all
copies of the works possessed in a physical medium and discontinue
all use of and all access to other copies of Project Gutenberg™
works.
• You provide, in accordance with paragraph 1.F.3, a full refund of
any money paid for a work or a replacement copy, if a defect in the
electronic work is discovered and reported to you within 90 days of
receipt of the work.
• You comply with all other terms of this agreement for free
distribution of Project Gutenberg™ works.
1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg™ electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from the Project Gutenberg Literary Archive Foundation, the manager of
the Project Gutenberg™ trademark. Contact the Foundation as set
forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg™ collection. Despite these efforts, Project Gutenberg™
electronic works, and the medium on which they may be stored, may
contain “Defects,” such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
of Replacement or Refund” described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg™ trademark, and any other party distributing a Project
Gutenberg™ electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg™ electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg™
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg work, and (c) any
Defect you cause.
Section 2. Information about the Mission of Project Gutenberg
Project Gutenberg is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.
Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg’s
goals and ensuring that the Project Gutenberg collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non-profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation’s EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state’s laws.
The Foundation’s business office is located at 41 Watchung Plaza #516,
Montclair NJ 07042, USA, +1 (862) 621-9288. Email contact links and up
to date contact information can be found at the Foundation’s website
and official page at www.gutenberg.org/contact
Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation
Project Gutenberg™ depends upon and cannot survive without widespread
public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine-readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.
The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular state
visit www.gutenberg.org/donate.
While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.
International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate.
Section 5. General Information About Project Gutenberg electronic works
Professor Michael S. Hart was the originator of the Project
Gutenberg concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg eBooks with only a loose network of
volunteer support.
Project Gutenberg eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.
Most people start at our website which has the main PG search
facility: www.gutenberg.org.
This website includes information about Project Gutenberg,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.Source: Project Gutenberg ebook #20776. Public-domain status is recorded per item; the licence text above is reproduced unchanged.